[PATCH v3 3/4] arm/dts: AM33XX: Configure pinmuxs for D_CAN1 on AM335x-EVM

AnilKumar Ch anilkumar at ti.com
Thu Aug 16 22:20:09 EST 2012


Add D_CAN1 pinctrl node to am3358_pinmux master node to export
D_CAN functionality on AM335x EVM according to pinctrl-single
driver.

Signed-off-by: AnilKumar Ch <anilkumar at ti.com>
---
Changes from v2:
	- Incorporated Vaibhav H's comments on v2
	  * Added dcan0 instances to am33xx.dtsi file

Changes from v1:
	- These two patches separated from c_can DT support
	  patch series.

 arch/arm/boot/dts/am335x-evm.dts |   12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 5dd8a6b..a64c30a 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -18,6 +18,18 @@
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
+	am3358_pinmux: pinmux at 44E10800 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&d_can1_pins>;
+
+		d_can1_pins: pinmux_d_can_pins {
+			pinctrl-single,pins = <
+				0x168 0x2	/* uart0_ctsn.d_can1_tx, OUTPUT | MODE2 */
+				0x16C 0x32	/* uart0_rtsn.d_can1_rx, INPUT_PULLUP | MODE2 */
+			>;
+		};
+	};
+
 	ocp {
 		uart1: serial at 44E09000 {
 			status = "okay";
-- 
1.7.9.5



More information about the devicetree-discuss mailing list