[PATCH V3] regulator: tps6586x: add support for SYS rail

[Stephen Warren]

On 08/05/2012 01:41 AM, Laxman Dewangan wrote:
> Device have SYS rail which is always ON. It is system
> power bus. LDO5 and LDO_RTC get powered through this rail
> internally. Add support for this rail and make the
> LDO5/LDO_RTC input supply to "sys".
> Update document accordingly.

Mark,

This patch appears to have been applied correctly as b93fffb in your
tree, but your for-next branch merge commit f110340 appears to have
dropped the following two hunks:

> diff --git a/Documentation/devicetree/bindings/regulator/tps6586x.txt b/Documentation/devicetree/bindings/regulator/tps6586x.txt
> index d156e1b..ec527d9 100644
> --- a/Documentation/devicetree/bindings/regulator/tps6586x.txt
> +++ b/Documentation/devicetree/bindings/regulator/tps6586x.txt
> @@ -8,7 +8,8 @@ Required properties:
>  - gpio-controller: mark the device as a GPIO controller
>  - regulators: list of regulators provided by this controller, must have
>    property "regulator-compatible" to match their hardware counterparts:
> -  sm[0-2], ldo[0-9] and ldo_rtc
> +  sys, sm[0-2], ldo[0-9] and ldo_rtc
> +- sys-supply: The input supply for SYS.
>  - sm0-supply: The input supply for the SM0.
>  - sm1-supply: The input supply for the SM1.
>  - sm2-supply: The input supply for the SM2.
> @@ -30,6 +34,7 @@ Example:
>  		#gpio-cells = <2>;
>  		gpio-controller;
>  
> +		sys-supply = <&some_reg>;
>  		sm0-supply = <&some_reg>;
>  		sm1-supply = <&some_reg>;
>  		sm2-supply = <&some_reg>;