[PATCH v3 0/3] Add DT support to C_CAN/D_CAN controller
AnilKumar Ch
anilkumar at ti.com
Thu Aug 2 23:13:08 EST 2012
This patch series adds the device tree support and Runtime PM support
to C_CAN/D_CAN controller. First patch cleans up the device names used
in c_can driver.
These patches have been tested on AM335x EVM using some additional
patches to add device tree data to EVM dts files and to initialize
D_CAN RAM. D_CAN raminit is controlled from control module register.
This patch will be submitted once control module MFD driver support
is added. And these patches are based on linx-can-next tree.
Due to lack of hardware I am not able to test c_can functionality.
I appreciate if anyone can test c_can functionality with this patch
series.
Changes from v3:
- Changed the patch sequence
Changes from v2:
- Incorporated Marcs on v2
* Fix compilation errors in pci due to device name changes
in v2 by adding new patch.
Changes from v1:
- Separated 4 patches into CAN driver specific and device
tree data addition specific.
- Incorporated Marc's comments on v1
* Modified c_can_dev_id enum to handle both devtype and
platform device id index.
* Removed "legacy bosch,c_can_platform" from DT bindings
AnilKumar Ch (3):
can: c_can: Modify c_can device names
can: c_can: Add device tree support to Bosch C_CAN/D_CAN controller
can: c_can: Add runtime PM support to Bosch C_CAN/D_CAN controller
.../devicetree/bindings/net/can/c_can.txt | 37 +++++++++++
drivers/net/can/c_can/c_can.h | 5 +-
drivers/net/can/c_can/c_can_pci.c | 6 +-
drivers/net/can/c_can/c_can_platform.c | 65 +++++++++++++++-----
4 files changed, 91 insertions(+), 22 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/can/c_can.txt
--
1.7.9.5
More information about the devicetree-discuss
mailing list