[PATCH V3 2/2] video: drm: exynos: Add device tree support

Joonyoung Shim dofmind at gmail.com
Fri Aug 17 11:25:29 EST 2012


Hi,

2012/8/16 Leela Krishna Amudala <l.krishna at samsung.com>:
> Add device tree based discovery support for DRM-FIMD driver.
>
> Signed-off-by: Leela Krishna Amudala <l.krishna at samsung.com>
> ---
>  Documentation/devicetree/bindings/fb/drm-fimd.txt |   80 +++++++++++++++++
>  drivers/gpu/drm/exynos/exynos_drm_fimd.c          |   95 ++++++++++++++++++++-
>  2 files changed, 173 insertions(+), 2 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/fb/drm-fimd.txt
>
> diff --git a/Documentation/devicetree/bindings/fb/drm-fimd.txt b/Documentation/devicetree/bindings/fb/drm-fimd.txt
> new file mode 100644
> index 0000000..8ad8814
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/fb/drm-fimd.txt
> @@ -0,0 +1,80 @@
> +* Samsung Display Controller using DRM frame work
> +
> +The display controller is used to transfer image data from memory to an
> +external LCD driver interface. It supports various color formats such as
> +rgb and yuv.
> +
> +Required properties:
> + - compatible: Should be "samsung,exynos5-drm" for fimd using DRM frame work.

Just use "samsung,exynos5-fb" and add to support exynos4-fb

> + - reg: physical base address of the controller and length of memory
> +   mapped region.
> + - interrupts: Three interrupts should be specified. The interrupts should be
> +   specified in the following order.
> +   - VSYNC interrupt
> +   - FIFO level interrupt
> +   - FIMD System Interrupt
> +
> + - samsung,fimd-display: This property should specify the phandle of the
> +   display device node which holds the video interface timing with the
> +   below mentioned properties.
> +
> +   - lcd-htiming: Specifies the horizontal timing for the overlay. The
> +     horizontal timing includes four parameters in the following order.
> +
> +     - horizontal back porch (in number of lcd clocks)
> +     - horizontal front porch (in number of lcd clocks)
> +     - hsync pulse width (in number of lcd clocks)
> +     - Display panels X resolution.
> +
> +   - lcd-vtiming: Specifies the vertical timing for the overlay. The
> +     vertical timing includes four parameters in the following order.
> +
> +     - vertical back porch (in number of lcd lines)
> +     - vertical front porch (in number of lcd lines)
> +     - vsync pulse width (in number of lcd clocks)
> +     - Display panels Y resolution.
> +
> +
> + - samsung,default-window: Specifies the default window number of the fimd controller.
> +
> + - samsung,fimd-win-bpp: Specifies the bits per pixel.
> +
> +Optional properties:
> + - supports-mipi-panel: Specifies the lcd is mipi panel type

How is this property used?

> + - samsung,fimd-vidout-rgb: Video output format is RGB.
> + - samsung,fimd-inv-vclk: invert video clock polarity.
> + - samsung,fimd-frame-rate: Number of video frames per second.
> +
> +Example:
> +
> +       The following is an example for the fimd controller is split into
> +       two portions. The SoC specific portion can be specified in the SoC
> +       specific dts file. The board specific portion can be specified in the
> +       board specific dts file.
> +
> +       - SoC Specific portion
> +
> +       fimd {
> +               compatible = "samsung,exynos5-drm";
> +               interrupt-parent = <&combiner>;
> +               reg = <0x14400000 0x40000>;
> +               interrupts = <18 5>, <18 4>, <18 6>;
> +       };
> +
> +       - Board Specific portion
> +
> +       lcd_fimd0: lcd_panel0 {
> +                       lcd-htiming = <4 4 4 480>;
> +                       lcd-vtiming = <4 4 4 320>;
> +                       supports-mipi-panel;
> +       };
> +
> +       fimd {
> +               samsung,fimd-display = <&lcd_fimd0>;
> +               samsung,fimd-vidout-rgb;
> +               samsung,fimd-inv-vclk;
> +               samsung,fimd-frame-rate = <60>;
> +               samsung,default-window = <0>;
> +               samsung,fimd-win-bpp = <32>;
> +       };
> +
> diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
> index 8379c59..1753846 100644
> --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
> +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
> @@ -18,6 +18,7 @@
>  #include <linux/platform_device.h>
>  #include <linux/clk.h>
>  #include <linux/pm_runtime.h>
> +#include <linux/of.h>
>
>  #include <video/samsung_fimd.h>
>  #include <drm/exynos_drm.h>
> @@ -103,9 +104,18 @@ struct fimd_context {
>         struct exynos_drm_panel_info *panel;
>  };
>
> +static const struct of_device_id drm_fimd_dt_match[];
> +

Please remove drm_ prefix over all.

>  static inline struct drm_fimd_driver_data *drm_fimd_get_driver_data(
>         struct platform_device *pdev)
>  {
> +#ifdef CONFIG_OF
> +       if (pdev->dev.of_node) {
> +               const struct of_device_id *match;
> +               match = of_match_node(drm_fimd_dt_match, pdev->dev.of_node);

Use of_match_ptr().

> +               return (struct drm_fimd_driver_data *)match->data;
> +       }
> +#endif
>         return (struct drm_fimd_driver_data *)
>                 platform_get_device_id(pdev)->driver_data;
>  }
> @@ -821,12 +831,79 @@ static int fimd_power_on(struct fimd_context *ctx, bool enable)
>         return 0;
>  }
>
> +#ifdef CONFIG_OF
> +static struct exynos_drm_fimd_pdata *drm_fimd_dt_parse_pdata(struct device *dev)
> +{
> +       struct device_node *np = dev->of_node;
> +       struct device_node *disp_np;
> +       struct exynos_drm_fimd_pdata *pd;
> +       u32 data[4];
> +
> +       pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
> +       if (!pd) {
> +               dev_err(dev, "memory allocation for pdata failed\n");
> +               return ERR_PTR(-ENOMEM);
> +       }
> +
> +       if (of_get_property(np, "samsung,fimd-vidout-rgb", NULL))
> +               pd->vidcon0 |= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB;
> +       if (of_get_property(np, "samsung,fimd-vidout-tv", NULL))
> +               pd->vidcon0 |= VIDCON0_VIDOUT_TV;

What is this?

> +       if (of_get_property(np, "samsung,fimd-inv-hsync", NULL))
> +               pd->vidcon1 |= VIDCON1_INV_HSYNC;
> +       if (of_get_property(np, "samsung,fimd-inv-vsync", NULL))
> +               pd->vidcon1 |= VIDCON1_INV_VSYNC;
> +       if (of_get_property(np, "samsung,fimd-inv-vclk", NULL))
> +               pd->vidcon1 |= VIDCON1_INV_VCLK;
> +       if (of_get_property(np, "samsung,fimd-inv-vden", NULL))
> +               pd->vidcon1 |= VIDCON1_INV_VDEN;
> +
> +       disp_np = of_parse_phandle(np, "samsung,fimd-display", 0);
> +       if (!disp_np) {
> +               dev_err(dev, "unable to find display panel info\n");
> +               return ERR_PTR(-EINVAL);
> +       }
> +
> +       if (of_property_read_u32_array(disp_np, "lcd-htiming", data, 4)) {
> +               dev_err(dev, "invalid horizontal timing\n");
> +               return ERR_PTR(-EINVAL);
> +       }
> +       pd->panel.timing.left_margin = data[0];
> +       pd->panel.timing.right_margin = data[1];
> +       pd->panel.timing.hsync_len = data[2];
> +       pd->panel.timing.xres = data[3];
> +
> +       if (of_property_read_u32_array(disp_np, "lcd-vtiming", data, 4)) {
> +               dev_err(dev, "invalid vertical timing\n");
> +               return ERR_PTR(-EINVAL);
> +       }
> +       pd->panel.timing.upper_margin = data[0];
> +       pd->panel.timing.lower_margin = data[1];
> +       pd->panel.timing.vsync_len = data[2];
> +       pd->panel.timing.yres = data[3];
> +
> +       of_property_read_u32(np, "samsung,fimd-frame-rate",
> +                               &pd->panel.timing.refresh);
> +
> +       of_property_read_u32(np, "samsung,default-window", &pd->default_win);
> +
> +       of_property_read_u32(np, "samsung,fimd-win-bpp", &pd->bpp);
> +
> +       return pd;
> +}
> +#else
> +static int exynos_drm_fimd_pdata *drm_fimd_dt_parse_pdata(struct device *dev)
> +{
> +       return NULL;
> +}
> +#endif /* CONFIG_OF */
> +
>  static int __devinit fimd_probe(struct platform_device *pdev)
>  {
>         struct device *dev = &pdev->dev;
>         struct fimd_context *ctx;
>         struct exynos_drm_subdrv *subdrv;
> -       struct exynos_drm_fimd_pdata *pdata;
> +       struct exynos_drm_fimd_pdata *pdata = pdev->dev.platform_data;
>         struct exynos_drm_panel_info *panel;
>         struct resource *res;
>         int win;
> @@ -834,7 +911,11 @@ static int __devinit fimd_probe(struct platform_device *pdev)
>
>         DRM_DEBUG_KMS("%s\n", __FILE__);
>
> -       pdata = pdev->dev.platform_data;
> +       if (pdev->dev.of_node) {
> +               pdata = drm_fimd_dt_parse_pdata(&pdev->dev);
> +               if (IS_ERR(pdata))
> +                       return PTR_ERR(pdata);
> +       }
>         if (!pdata) {
>                 dev_err(dev, "no platform data specified\n");
>                 return -EINVAL;
> @@ -1027,6 +1108,15 @@ static struct platform_device_id exynos_drm_fimd_driver_ids[] = {
>  };
>  MODULE_DEVICE_TABLE(platform, exynos_drm_fimd_driver_ids);
>
> +#ifdef CONFIG_OF
> +static const struct of_device_id drm_fimd_dt_match[] = {
> +       { .compatible = "samsung,exynos5-drm",
> +         .data = &exynos5_drm_fimd_driver_data },

Add also samsung,exynos4-fb.

> +       {},
> +};
> +MODULE_DEVICE_TABLE(of, drm_fimd_dt_match);
> +#endif
> +
>  static const struct dev_pm_ops fimd_pm_ops = {
>         SET_SYSTEM_SLEEP_PM_OPS(fimd_suspend, fimd_resume)
>         SET_RUNTIME_PM_OPS(fimd_runtime_suspend, fimd_runtime_resume, NULL)
> @@ -1040,5 +1130,6 @@ struct platform_driver fimd_driver = {
>                 .name   = "exynos-drm-fimd",
>                 .owner  = THIS_MODULE,
>                 .pm     = &fimd_pm_ops,
> +               .of_match_table = of_match_ptr(drm_fimd_dt_match),
>         },
>  };
> --
> 1.7.0.4
>
> _______________________________________________
> devicetree-discuss mailing list
> devicetree-discuss at lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/devicetree-discuss

Thanks.

-- 
- Joonyoung Shim


More information about the devicetree-discuss mailing list