[PATCH 3/4] arm/dts: omap5-evm: Add keypad data
Koen Kooi
koen at dominion.thruhere.net
Tue Aug 7 22:54:22 EST 2012
Op 3 aug. 2012, om 14:38 heeft Sourav Poddar <sourav.poddar at ti.com> het volgende geschreven:
> Add keypad data node in omap5 device tree file.
> Also fill the device tree binding parameters
> with the required value in "omap5-evm" dts file.
>
> Tested on omap5430 evm with 3.5 custom kernel.
>
> Cc: Benoit Cousson <b-cousson at ti.com>
> Cc: Felipe Balbi <balbi at ti.com>
> Cc: Santosh Shilimkar <santosh.shilimkar at ti.com>
> Acked-by: Felipe Balbi <balbi at ti.com>
> Signed-off-by: Sourav Poddar <sourav.poddar at ti.com>
> ---
> arch/arm/boot/dts/omap5-evm.dts | 12 ++++++++++++
> arch/arm/boot/dts/omap5.dtsi | 5 +++++
> 2 files changed, 17 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts
> index 45a8aeb..09fe941 100644
> --- a/arch/arm/boot/dts/omap5-evm.dts
> +++ b/arch/arm/boot/dts/omap5-evm.dts
> @@ -17,6 +17,18 @@
> device_type = "memory";
> reg = <0x80000000 0x40000000>; /* 1 GB */
> };
> +
> + keypad {
> + keypad,num-rows = <8>;
> + keypad,num-columns = <8>;
> + linux,keymap = < 0x02020073
> + 0x02030072
> + 0x020400e7
> + 0x02050066
> + 0x0206006b
> + 0x020700d9 >;
> + linux,input-no-autorepeat;
> + };
Again not a coment on your patch, but on DT:
If DT bindings must be OS independent, what then, is that linux keycode doing there?
regards,
Koen
More information about the devicetree-discuss
mailing list