June 2006 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Thu Jun 1 00:40:36 EST 2006
Ending: Fri Jun 30 23:52:40 EST 2006
Messages: 821

• >=2.6.17-rc4-mm1 kernel compilation problem (relocation truncated to fit)   Nathan Pilatzke
• >=2.6.17-rc4-mm1 kernel compilation problem (relocation truncated to fit)   H. Peter Anvin
• >=2.6.17-rc4-mm1 kernel compilation problem (relocation truncated to fit)   Nathan Pilatzke
• [PATCH] use msleep() for RTAS delays   John Rose
• [PATCH] Provide mechanism for editing builtin command-line in zImage binary.   Mark A. Greer
• [PATCH] Provide mechanism for editing builtin command-line in zImage binary.   Michal Ostrowski
• [PATCH] Provide mechanism for editing builtin command-line in zImage binary.   Matthew McClintock
• Collecting hypervisor call stats   Mike Kravetz
• [PATCH] Provide mechanism for editing builtin command-line in zImage binary.   Michal Ostrowski
• Collecting hypervisor call stats   Geoff Levand
• Collecting hypervisor call stats   Paul Mackerras
• Collecting hypervisor call stats   Mike Kravetz
• pmf_register_irq_client gives sleep with locks held warning   Benjamin Herrenschmidt
• Collecting hypervisor call stats   Jimi Xenidis
• Collecting hypervisor call stats   Christopher Yeoh
• Collecting hypervisor call stats   Benjamin Herrenschmidt
• [PATCH] use msleep() for RTAS delays   Benjamin Herrenschmidt
• [PATCH] use msleep() for RTAS delays   Paul Mackerras
• [RFC 0/8] snd-aoa: add snd-aoa   Johannes Berg
• [RFC 1/8] snd-aoa: add aoa header files   Johannes Berg
• [RFC 2/8] snd-aoa: add aoa core   Johannes Berg
• [RFC 3/8] snd-aoa: add soundbus   Johannes Berg
• [RFC 4/8] snd-aoa: add i2sbus   Johannes Berg
• [RFC 5/8] snd-aoa: add codecs   Johannes Berg
• [RFC 6/8] snd-aoa: add layout-id fabric   Johannes Berg
• [RFC 7/8] snd-aoa: add Kconfig and Makefile   Johannes Berg
• [RFC 8/8] snd-aoa: wire up aoa in sound/   Johannes Berg
• [PATCH] use msleep() for RTAS delays   John Rose
• [PATCH] use msleep() for RTAS delays   Arnd Bergmann
• Collecting hypervisor call stats   Arnd Bergmann
• snd-aoa: using feature calls for GPIOs   Johannes Berg
• [PATCH/2.6.17-rc4 4/10]Powerpc: Add tsi108 pic support   Alexandre Bounine
• [PATCH] yaboot: enable boot from iscsi target via ethernet devices on js20.   Doug Maxey
• SII3124-2   Rune Torgersen
• Collecting hypervisor call stats   Benjamin Herrenschmidt
• [PATCH/2.6.17-rc4 4/10]Powerpc: Add tsi108 pic support   Benjamin Herrenschmidt
• [PATCH] use msleep() for RTAS delays   John Rose
• How to find out what a process has been doing on a PPC-440 system   Kallol Biswas
• How to find out what a process has been doing on a PPC-440 sy stem   Kallol Biswas
• How to find out what a process has been doing on a PPC-440 sy stem   Kallol Biswas
• How to find out what a process has been doing on a PPC-440 sy stem   Kallol Biswas
• [PATCH] [2.6.18] U4 DART improvements   Olof Johansson
• pSeries_mach_cpu_die() question   Benjamin Herrenschmidt
• pSeries_mach_cpu_die() question   Nathan Lynch
• pSeries_mach_cpu_die() question   Benjamin Herrenschmidt
• [PATCH/2.6.17-rc4 1/10] Powerpc: Add general support for mpc7 448h pc2 (Taiga) platform   Zang Roy-r61911
• [PATCH/2.6.17-rc4 1/10] Powerpc: Add general support for mpc7 448h pc2 (Taiga) platform   Benjamin Herrenschmidt
• [PATCH/2.6.17-rc4 1/10] Powerpc: Add general support for mpc7 448h pc2 (Taiga) platform   Liu Dave-r63238
• [PATCH/2.6.17-rc4 1/10] Powerpc: Add general support for mpc7 448h pc2 (Taiga) platform   Zang Roy-r61911
• Recall: [PATCH/2.6.17-rc4 1/10] Powerpc: Add general support for mpc7 448h pc2 (Taiga) platform   Zang Roy-r61911
• [PATCH/2.6.17-rc4 1/10] Powerpc: Add general support for mpc7 448h pc2 (Taiga) platform   Zang Roy-r61911
• [PATCH/2.6.17-rc4 1/10] Powerpc: Add general support for mpc7 448h pc2 (Taiga) platform   Benjamin Herrenschmidt
• Recall: [PATCH/2.6.17-rc4 1/10] Powerpc: Add general support for mpc7 448h pc2 (Taiga) platform   Benjamin Herrenschmidt
• [PATCH/2.6.17-rc4 1/10] Powerpc: Add general support for mpc7 448h pc2 (Taiga) platform   Benjamin Herrenschmidt
• [PATCH/2.6.17-rc4 1/10] Powerpc: Add general support for mpc7 448h pc2 (Taiga) platform   Zang Roy-r61911
• [PATCH/2.6.17-rc4 1/10] Powerpc: Add general support for mpc7 448h pc2 (Taiga) platform   Liu Dave-r63238
• [PATCH] [2.6.18] U4 DART improvements   Segher Boessenkool
• [Alsa-devel] [RFC 2/8] snd-aoa: add aoa core   Takashi Iwai
• [Alsa-devel] [RFC 2/8] snd-aoa: add aoa core   Johannes Berg
• [Alsa-devel] [RFC 3/8] snd-aoa: add soundbus   Takashi Iwai
• [Alsa-devel] [RFC 3/8] snd-aoa: add soundbus   Johannes Berg
• [PATCH] hugetlb: powerpc: Actively close unused htlb regions on vma close   Adam Litke
• [Alsa-devel] [RFC 3/8] snd-aoa: add soundbus   Takashi Iwai
• [Alsa-devel] [RFC 4/8] snd-aoa: add i2sbus   Takashi Iwai
• [Alsa-devel] [RFC 5/8] snd-aoa: add codecs   Takashi Iwai
• [Alsa-devel] [RFC 3/8] snd-aoa: add soundbus   Andreas Schwab
• [Alsa-devel] [RFC 0/8] snd-aoa: add snd-aoa   Takashi Iwai
• [Alsa-devel] [RFC 3/8] snd-aoa: add soundbus   Johannes Berg
• [Alsa-devel] [RFC 3/8] snd-aoa: add soundbus   Takashi Iwai
• [PATCH/2.6.17-rc4 1/10] Powerpc: Add general support for mpc7 448h pc2 (Taiga) platform   Kumar Gala
• [PATCH] fix make rpm for powerpc   Mike Wolf
• [Alsa-devel] [RFC 0/8] snd-aoa: add snd-aoa   Johannes Berg
• [PATCH] hugetlb: powerpc: Actively close unused htlb regions on vma close   Dave Hansen
• [Alsa-devel] [RFC 0/8] snd-aoa: add snd-aoa   Takashi Iwai
• [PATCH] hugetlb: powerpc: Actively close unused htlb regions on vma close   Hugh Dickins
• [PATCH] hugetlb: powerpc: Actively close unused htlb regions on vma close   Adam Litke
• [PATCH] hugetlb: powerpc: Actively close unused htlb regions on vma close   Adam Litke
• [PATCH] hugetlb: powerpc: Actively close unused htlb regions on vma close   Christoph Lameter
• [PATCH 2.6.16.16] sata_sil24: SII3124 sata driver endian problem   Rune Torgersen
• [PATCH] reorg RTAS delay code   John Rose
• [PATCH] hugetlb: powerpc: Actively close unused htlb regions on vma close   Adam Litke
• [PATCH] hugetlb: powerpc: Actively close unused htlb regions on vma close   Christoph Lameter
• [PATCH/2.6.17-rc4 4/10]Powerpc: Add tsi108 pic support   Alexandre Bounine
• [PATCH] reorg RTAS delay code   Nathan Lynch
• [PATCH 2.6.16.16] sata_sil24: SII3124 sata driver endian problem   Andrew Morton
• [PATCH/2.6.17-rc4 1/10] Powerpc: Add general support for mpc7 448h pc2 (Taiga) platform   Benjamin Herrenschmidt
• [PATCH] [2.6.18] U4 DART improvements   Benjamin Herrenschmidt
• [PATCH] [2.6.18] U4 DART improvements   Olof Johansson
• [PATCH 2.6.16.16] sata_sil24: SII3124 sata driver endian problem   Alexey Dobriyan
• [PATCH 2.6.16.16] sata_sil24: SII3124 sata driver endian problem   Tejun Heo
• snd-aoa: using feature calls for GPIOs   Benjamin Herrenschmidt
• [PATCH/2.6.17-rc4 8/10] Add tsi108 8250 serial support   Russell King
• snd-aoa: using feature calls for GPIOs   Johannes Berg
• [HACK] add sandpoint + flattened dt support to arch/powerpc/boot   Matthew McClintock
• [HACK] add sandpoint + flattened dt support to arch/powerpc/boot   Tom Rini
• [PATCH] reorg RTAS delay code   John Rose
• [PATCH] reorg RTAS delay code   Nathan Lynch
• FW: process starvation with 2.6 scheduler   Kallol Biswas
• process starvation with 2.6 scheduler   Kallol Biswas
• snd-aoa: using feature calls for GPIOs   Johannes Berg
• snd-aoa: using feature calls for GPIOs   Benjamin Herrenschmidt
• [PATCH/2.6.17-rc4 4/10]Powerpc: Add tsi108 pic support   Zang Roy-r61911
• [PATCH/2.6.17-rc4 4/10]Powerpc: Add tsi108 pic support   Benjamin Herrenschmidt
• [Alsa-devel] [RFC 4/8] snd-aoa: add i2sbus   Johannes Berg
• [Alsa-devel] [RFC 5/8] snd-aoa: add codecs   Johannes Berg
• [PATCH 0/5] Sizing zones and holes in an architecture independent manner V7   Mel Gorman
• [PATCH 1/5] Introduce mechanism for registering active regions of memory   Mel Gorman
• [PATCH 2/5] Have Power use add_active_range() and free_area_init_nodes()   Mel Gorman
• [PATCH 3/5] Have x86 use add_active_range() and free_area_init_nodes   Mel Gorman
• [PATCH 4/5] Have x86_64 use add_active_range() and free_area_init_nodes   Mel Gorman
• [PATCH 5/5] Have ia64 use add_active_range() and free_area_init_nodes   Mel Gorman
• [Alsa-devel] [RFC 4/8] snd-aoa: add i2sbus   Takashi Iwai
• [PATCH 1/2] powerpc: implement pcibus_to_node and pcibus_to_cpumask   Christoph Hellwig
• [PATCH 2/2] powerpc: node-away dma allocations   Christoph Hellwig
• [PATCH/2.6.17-rc4 4/10]Powerpc: Add tsi108 pic support   Alexandre Bounine
• PowerPC 8266 ADS-PCI(CPM8260) SCC (UART/Ethernet Mode) and SMC in UART mode   Aung Soe
• Base address of executables - weirdness?   H. Peter Anvin
• Intercept System call using Kernel module is 2.6 kernel   Meswani, Mitesh
• Collecting hypervisor call stats   Mike Kravetz
• Intercept System call using Kernel module is 2.6 kernel   Jeff.Fellin at rflelect.com
• process starvation with 2.6 scheduler   Thiago Galesi
• Intercept System call using Kernel module is 2.6 kernel   Jenkins, Clive
• Base address of executables - weirdness?   Linas Vepstas
• Intercept System call using Kernel module is 2.6 kernel   Arnd Bergmann
• [snd-aoa] looking for layout-id 41   Johannes Berg
• Base address of executables - weirdness?   H. Peter Anvin
• 2.4 kernel scheduling (?) problems   Tobias Netzel
• [PATCH/2.6.17-rc4 4/10]Powerpc: Add tsi108 pic support   Alexandre Bounine
• [snd-aoa] more layout IDs   Johannes Berg
• Base address of executables - weirdness?   Andreas Schwab
• Base address of executables - weirdness?   H. Peter Anvin
• [PATCH] via-pmu: add input device   Johannes Berg
• [PATCH] convert powermac ide blink to new led infrastructure   Johannes Berg
• [PATCH/2.6.17-rc4 4/10]Powerpc: Add tsi108 pic support   Benjamin Herrenschmidt
• [PATCH 0/5] Sizing zones and holes in an architecture independent manner V7   Andrew Morton
• Collecting hypervisor call stats   Christopher Yeoh
• [PATCH] powerpc: oprofile support for POWER6   Michael Neuling
• [PATCH] powerpc: Fix call to ibm,client-architecture-support   Benjamin Herrenschmidt
• [PATCH] powerpc: Fix cell blade detection   Benjamin Herrenschmidt
• [PATCH] powerpc: Add udbg-immortal kernel option   Benjamin Herrenschmidt
• [PATCH] powerpc: Add udbg-immortal kernel option   Olof Johansson
• [PATCH] powerpc: Add udbg-immortal kernel option   Benjamin Herrenschmidt
• [PATCH 1/3] Add a prctl to change the endianness of a process.   Paul Mackerras
• [PATCH 2/3] powerpc: Implement support for setting little-endian mode via prctl   Paul Mackerras
• [PATCH 3/3] powerpc: Implement PR_[GS]ET_UNALIGN prctls for powerpc   Paul Mackerras
• [PATCH 1/2] powerpc: Make rtas console _much_ faster   Michael Ellerman
• [PATCH 2/2] powerpc: Cleanup hvc_rtas.c a little   Michael Ellerman
• [PATCH] powerpc: Add udbg-immortal kernel option   Arnd Bergmann
• [PATCH 0/5] Sizing zones and holes in an architecture independent manner V7   Mel Gorman
• [PATCH 0/5] Sizing zones and holes in an architecture independent manner V7   Andi Kleen
• [PATCH 0/5] Sizing zones and holes in an architecture independent manner V7   Mel Gorman
• [PATCH 0/5] Sizing zones and holes in an architecture independent manner V7   Andi Kleen
• [PATCH 0/5] Sizing zones and holes in an architecture independent manner V7   Mel Gorman
• [Alsa-devel] [RFC 4/8] snd-aoa: add i2sbus   Johannes Berg
• [Alsa-devel] [RFC 4/8] snd-aoa: add i2sbus   Takashi Iwai
• [Alsa-devel] [RFC 4/8] snd-aoa: add i2sbus   Johannes Berg
• [Alsa-devel] [RFC 4/8] snd-aoa: add i2sbus   Takashi Iwai
• [Alsa-devel] [RFC 4/8] snd-aoa: add i2sbus   Johannes Berg
• [Alsa-devel] [RFC 4/8] snd-aoa: add i2sbus   Takashi Iwai
• [Alsa-devel] [RFC 4/8] snd-aoa: add i2sbus   Johannes Berg
• [RFC 00/12] snd-aoa: add snd-aoa   Johannes Berg
• [RFC 01/12] snd-powermac: no longer handle anything with a layout-id property   Johannes Berg
• [RFC 02/12] snd-aoa: add aoa header files   Johannes Berg
• [RFC 03/12] snd-aoa: add aoa core   Johannes Berg
• [RFC 04/12] snd-aoa: add soundbus   Johannes Berg
• [RFC 05/12] snd-aoa: add i2sbus   Johannes Berg
• [RFC 06/12] snd-aoa: add onyx codec   Johannes Berg
• [RFC 07/12] snd-aoa: add tas codec   Johannes Berg
• [RFC 08/12] snd-aoa: add toonie codec   Johannes Berg
• [RFC 09/12] snd-aoa: add build files for codecs   Johannes Berg
• [RFC 10/12] snd-aoa: add layout-id fabric   Johannes Berg
• [RFC 11/12] snd-aoa: add Kconfig and Makefile   Johannes Berg
• [RFC 12/12] snd-aoa: wire up aoa in sound/   Johannes Berg
• [PATCH] dtc: add setting of physical boot cpu   Jon Loeliger
• [PATCH 0/5] Sizing zones and holes in an architecture independent manner V7   Andi Kleen
• Linux kernel 2.6 on IBM RS/6000 7025-F40   Christophe Simon
• [RFC 07/12] snd-aoa: add tas codec   Johannes Berg
• [PATCH 0/5] Sizing zones and holes in an architecture independent manner V7   Mel Gorman
• [PATCH 2/3] powerpc: Implement support for setting little-endian mode via prctl   Olof Johansson
• [Alsa-devel] [RFC 03/12] snd-aoa: add aoa core   Takashi Iwai
• [Alsa-devel] [RFC 00/12] snd-aoa: add snd-aoa   Takashi Iwai
• [Alsa-devel] [RFC 05/12] snd-aoa: add i2sbus   Takashi Iwai
• [Alsa-devel] [RFC 11/12] snd-aoa: add Kconfig and Makefile   Takashi Iwai
• [PATCH 0/3] PPC64 PCIe support   Jake Moilanen
• [PATCH 1/3] PCIe device_type pciex   Jake Moilanen
• [PATCH 2/3] MSI power abstraction   Jake Moilanen
• [PATCH 3/3] RTAS MSI   Jake Moilanen
• [PATCH 2/3] powerpc: Implement support for setting little-endian mode via prctl   Paul Mackerras
• [PATCH 0/10] Add MPC8641 HPCN Platform   Jon Loeliger
• [PATCH 1/10] Add the mpc8641 hpcn Kconfig and Makefiles.   Jon Loeliger
• [PATCH 2/10] Add the MPC8641 HPCN platform files.   Jon Loeliger
• [PATCH 3/10] Add MPC8641 HPCN PCI and PCI-Express files.   Jon Loeliger
• [PATCH 4/10] Guard L3CR references with CPU_FTR_L3CR.   Jon Loeliger
• [PATCH 5/10] Add 8641 CPU and i8259 Setup   Jon Loeliger
• [PATCH 6/10] Add 8641 Register space and IRQ definitions.   Jon Loeliger
• [PATCH 7/10] Add use of mpc86xx.h include files in legacy header files.   Jon Loeliger
• [PATCH 8/10] Add default mpc8641_hpcn config file.   Jon Loeliger
• [PATCH 9/10] Add Vitesse 8244 PHY for MPC8641 HPCN platform.   Jon Loeliger
• [PATCH 10/10] Prevent duplicate memory reservations for the Device Tree blob itself.   Jon Loeliger
• Collecting hypervisor call stats   Segher Boessenkool
• [PATCH 3/3] RTAS MSI   Nathan Lynch
• [PATCH] powerpc: oprofile support for POWER6   Segher Boessenkool
• [PATCH] powerpc: Fix call to ibm,client-architecture-support   Segher Boessenkool
• [PATCH] powerpc: Fix cell blade detection   Segher Boessenkool
• [PATCH] powerpc: Fix cell blade detection   Benjamin Herrenschmidt
• [PATCH] convert powermac ide blink to new led infrastructure   Benjamin Herrenschmidt
• [PATCH] powerpc: oprofile support for POWER6   Michael Neuling
• [PATCH] powerpc: oprofile support for POWER6   Michael Neuling
• [PATCH 1/10] Add the mpc8641 hpcn Kconfig and Makefiles.   Kumar Gala
• [PATCH 7/10] Add use of mpc86xx.h include files in legacy header files.   Kumar Gala
• [PATCH 6/10] Add 8641 Register space and IRQ definitions.   Kumar Gala
• [PATCH 2/3] powerpc: Add early debugging / xmon support for Cell   Michael Ellerman
• [PATCH 1/10] Add the mpc8641 hpcn Kconfig and Makefiles.   Jon Loeliger
• [PATCH 7/10] Add use of mpc86xx.h include files in legacy header files.   Jon Loeliger
• [PATCH 6/10] Add 8641 Register space and IRQ definitions.   Jon Loeliger
• [PATCH 3/3] RTAS MSI   Jake Moilanen
• pmf_register_irq_client gives sleep with locks held warning   Johannes Berg
• [PATCH 9/10] Add Vitesse 8244 PHY for MPC8641 HPCN platform.   Jeff Garzik
• [PATCH 9/10] Add Vitesse 8244 PHY for MPC8641 HPCN platform.   Jon Loeliger
• [PATCH 9/10] Add Vitesse 8244 PHY for MPC8641 HPCN platform.   Jeff Garzik
• [PATCH 9/10] Add Vitesse 8244 PHY for MPC8641 HPCN platform.   Jon Loeliger
• [PATCH 9/10] Add Vitesse 8244 PHY for MPC8641 HPCN platform.   Jeff Garzik
• [PATCH 9/10] Add Vitesse 8244 PHY for MPC8641 HPCN platform.   Jon Loeliger
• [PATCH 9/10] Add Vitesse 8244 PHY for MPC8641 HPCN platform.   Jeff Garzik
• [PATCH 0/10] Version 2 -- Add MPC8641 HPCN Platform   Jon Loeliger
• [PATCH 1/10 v2] Add the mpc8641 hpcn Kconfig and Makefiles.   Jon Loeliger
• [PATCH 2/10 v2] Add the MPC8641 HPCN platform files.   Jon Loeliger
• [PATCH 3/10 v2] Add MPC8641 HPCN PCI and PCI-Express files.   Jon Loeliger
• [PATCH 4/10 v2] Guard L3CR references with CPU_FTR_L3CR.   Jon Loeliger
• [PATCH 5/10 v2] Add 8641 CPU and i8259 Setup   Jon Loeliger
• [PATCH 6/10 v2] Add 8641 Register space and IRQ definitions.   Jon Loeliger
• [PATCH 7/10 v2] Add default mpc8641_hpcn config file.   Jon Loeliger
• [PATCH 8/10] Add Vitesse 8244 PHY for MPC8641 HPCN platform.   Jon Loeliger
• [PATCH 9/10 v2] Prevent duplicate memory reservations for the Device Tree blob itself.   Jon Loeliger
• [PATCH 10/10 v2] Document I2C_MPC option for 86xx too.   Jon Loeliger
• [PATCH 2/10 v2] Add the MPC8641 HPCN platform files.   Kumar Gala
• [PATCH 2/10 v2] Add the MPC8641 HPCN platform files.   Benjamin Herrenschmidt
• [PATCH 4/10 v2] Guard L3CR references with CPU_FTR_L3CR.   Benjamin Herrenschmidt
• [PATCH 5/10 v2] Add 8641 CPU and i8259 Setup   Benjamin Herrenschmidt
• [PATCH 3/10 v2] Add MPC8641 HPCN PCI and PCI-Express files.   Benjamin Herrenschmidt
• Linux kernel 2.6 on IBM RS/6000 7025-F40   Benjamin Herrenschmidt
• [PATCH 10/10 v2] Document I2C_MPC option for 86xx too.   Jean Delvare
• [RFC] I2C-MPC: Fix up error handling   Jean Delvare
• [PATCH] force 64bit mode in system_reset_fwnmi for broken POWER4 firmware   Paul Mackerras
• [PATCH] hugetlb: powerpc: Actively close unused htlb regions on vma close   David Gibson
• [PATCH] force 64bit mode in system_reset_fwnmi for broken POWER4 firmware   Olaf Hering
• [RFC/PATCH] powersave_nap cleanup   Paul Mackerras
• unsubscribe   rohitash panda
• [PATCH/2.6.17-rc4 4/10]Powerpc: Add tsi108 pic support   Zang Roy-r61911
• [PATCH] Compile failure fix for ppc on 2.6.17-rc4-mm3 (2nd attempt)   Paul Mackerras
• [PATCH] Provide mechanism for editing builtin command-line in zImage binary.   Paul Mackerras
• [PATCH] convert powermac ide blink to new led infrastructure   Johannes Berg
• [PATCH] convert powermac ide blink to new led infrastructure   Anton Blanchard
• [PATCH] convert powermac ide blink to new led infrastructure   Johannes Berg
• [Alsa-devel] [RFC 03/12] snd-aoa: add aoa core   Johannes Berg
• [Alsa-devel] [RFC 11/12] snd-aoa: add Kconfig and Makefile   Johannes Berg
• [Alsa-devel] [RFC 05/12] snd-aoa: add i2sbus   Johannes Berg
• [Alsa-devel] [RFC 00/12] snd-aoa: add snd-aoa   Johannes Berg
• [Alsa-devel] [RFC 05/12] snd-aoa: add i2sbus   Takashi Iwai
• [Alsa-devel] [RFC 00/12] snd-aoa: add snd-aoa   Takashi Iwai
• [PATCH 0/5] Sizing zones and holes in an architecture independent manner V7   Mel Gorman
• [PATCH] Editable kernel command-line in zImage binary.   mostrows at watson.ibm.com
• [PATCH 10/10 v2] Document I2C_MPC option for 86xx too.   Jon Loeliger
• [PATCH 2/10 v2] Add the MPC8641 HPCN platform files.   Jon Loeliger
• [PATCH 4/10 v2] Guard L3CR references with CPU_FTR_L3CR.   Jon Loeliger
• [PATCH 5/10 v2] Add 8641 CPU and i8259 Setup   Jon Loeliger
• [PATCH 3/10 v2] Add MPC8641 HPCN PCI and PCI-Express files.   Jon Loeliger
• [PATCH 5/10 v2] Add 8641 CPU and i8259 Setup   Xianghua Xiao
• [RFC/PATCH] powersave_nap cleanup   Nathan Lynch
• RFC: dma_mmap_coherent() for powerpc/ppc architecture and ALSA?   Gerhard Pircher
• [PATCH] powerpc: oprofile support for POWER6   Sonny Rao
• [PATCH 2/10 v2] Add the MPC8641 HPCN platform files.   Benjamin Herrenschmidt
• [PATCH 4/10 v2] Guard L3CR references with CPU_FTR_L3CR.   Benjamin Herrenschmidt
• [PATCH 3/10 v2] Add MPC8641 HPCN PCI and PCI-Express files.   Benjamin Herrenschmidt
• pmf_register_irq_client gives sleep with locks held warning   Benjamin Herrenschmidt
• RFC: dma_mmap_coherent() for powerpc/ppc architecture and ALSA?   Benjamin Herrenschmidt
• RFC: dma_mmap_coherent() for powerpc/ppc architecture and ALSA?   Lee Revell
• [PATCH] reorg RTAS delay code   Anton Blanchard
• [PATCH] reorg RTAS delay code   Anton Blanchard
• [PATCH] powerpc vdso updates   Anton Blanchard
• [PATCH] powerpc vdso updates   Benjamin Herrenschmidt
• RFC: dma_mmap_coherent() for powerpc/ppc architecture and ALSA?   Gerhard Pircher
• pmf_register_irq_client gives sleep with locks held warning   Johannes Berg
• [PATCH] powerpc: Fix pseries IOMMU allocations   Anton Blanchard
• [PATCH] powerpc: 64bit FPSCR support   Anton Blanchard
• [PATCH] powerpc: Optimise some TOC usage   Anton Blanchard
• [PATCH] powerpc: Remove stale 64bit on 32bit kernel code   Anton Blanchard
• [PATCH] powerpc: Update pseries defconfig   Anton Blanchard
• [PATCH] powerpc: pcibus_to_node fixes   Anton Blanchard
• [PATCH] powerpc: node local IOMMU tables   Anton Blanchard
• [PATCH] powerpc: Fix shared processor and mdelay interaction   Anton Blanchard
• [PATCH] powerpc: console_initcall ordering issues   Anton Blanchard
• [PATCH] powerpc: console_initcall ordering issues   Arnd Bergmann
• [PATCH] powerpc: cleanup dma_mapping_ops   Anton Blanchard
• [PATCH] powerpc: Fix HV bit handling on non partitioned machines   Anton Blanchard
• [PATCH 2/10 v2] Add the MPC8641 HPCN platform files.   Segher Boessenkool
• 2.6.16-rc6-mm2   Martin J. Bligh
• [PATCH] Link error when futexes are disabled on 64bit architectures   Anton Blanchard
• [PATCH] powerpc: system call micro optimisation   Anton Blanchard
• 2.6.16-rc6-mm2   Felix Oxley
• 2.6.16-rc6-mm2   Andrew Morton
• pmf_register_irq_client gives sleep with locks held warning   Benjamin Herrenschmidt
• [PATCH] powerpc: system call micro optimisation   Benjamin Herrenschmidt
• [PATCH] powerpc: update pmac32_defconfig   Anton Blanchard
• [PATCH] powerpc: add context.vdso_base for 32-bit too   Paul Mackerras
• [PATCH] powerpc: node local IOMMU tables   Olof Johansson
• [PATCH 2/10 v2] Add the MPC8641 HPCN platform files.   Zhang Wei-r63237
• [PATCH 2/10 v2] Add the MPC8641 HPCN platform files.   Benjamin Herrenschmidt
• [PATCH] Remove unused paca->pgdir field   Paul Mackerras
• RFC: dma_mmap_coherent() for powerpc/ppc architecture and ALSA?   Takashi Iwai
• RFC: dma_mmap_coherent() for powerpc/ppc architecture and ALSA?   Gerhard Pircher
• [PATCH] yaboot: enable boot from iscsi target via ethernet devices on js20.   Paul Nasrat
• [PATCH] reorg RTAS delay code   John Rose
• [PATCH] powerpc: check firmware state before suspending   Dave C Boutcher
• [PATCH/2.6.17-rc4 4/10]Powerpc: Add tsi108 pic support   Benjamin Herrenschmidt
• [PATCH] Use 64k pages without needing cache-inhibited large pages   Paul Mackerras
• [PATCH] Fix builtin command line interaction with firmware   Amos Waterland
• [PATCH] powerpc-genirq: Use generic_handle_irq()   Benjamin Herrenschmidt
• [PATCH] powerpc-genirq: port mpic driver   Benjamin Herrenschmidt
• [PATCH] powerpc-genirq: port xics driver   Benjamin Herrenschmidt
• [PATCH] powerpc-genirq: port 8259 driver   Benjamin Herrenschmidt
• [PATCH] powerpc-genirq: port legacy powermac PIC to genirq   Benjamin Herrenschmidt
• [PATCH] powerpc-genirq: port iseries pseudo-PIC to genirq   Benjamin Herrenschmidt
• [PATCH] powerpc-genirq: port cell iic and spider-pic to genirq   Benjamin Herrenschmidt
• [PATCH/2.6.17-rc4 8/10] Add tsi108 8250 serial support   Zang Roy-r61911
• [PATCH/2.6.17-rc6] net: Add tsi108 Ethernet device driver suppo rt   Zang Roy-r61911
• [PATCH/2.6.17-rc6 0/4 v2] powerpc: add mpc7448hpc2 (Taiga) boa rd support   Zang Roy-r61911
• [PATCH/2.6.17-rc6 1/4 v2] Powerpc: Add general support for mpc74 48hpc2 (Taiga) platform   Zang Roy-r61911
• [PATCH/2.6.17-rc6 2/4 v2] Powerpc: Add tsi108 pci and platform d evice data register function   Zang Roy-r61911
• [PATCH/2.6.17-rc6 3/4 v2]Powerpc: Add tsi108 mpic support   Zang Roy-r61911
• [PATCH/2.6.17-rc6 4/4 v2] Powerpc: mpc7448hpc2 (taiga) board con fig file   Zang Roy-r61911
• pmf_register_irq_client gives sleep with locks held warning   Johannes Berg
• pmf_register_irq_client gives sleep with locks held warning   Benjamin Herrenschmidt
• 32 bit userland on G5   Johannes Berg
• [PATCH] Fix builtin command line interaction with firmware   Segher Boessenkool
• [PATCH] powerpc-genirq: Use generic_handle_irq()   Josh Boyer
• [PATCH] powerpc-genirq: Use generic_handle_irq()   David Woodhouse
• 32 bit userland on G5   David Woodhouse
• windfarm for PM72/PM73/RM31   Étienne Bersac
• [PATCH] powerpc-genirq: Use generic_handle_irq()   Josh Boyer
• OpenFirmware framebuffer   Matt Sealey
• [PATCH] make pmf irq_client functions safe against pmf interrupts coming in   Johannes Berg
• 32 bit userland on G5   Johannes Berg
• OpenFirmware framebuffer   Nathan Lynch
• 32 bit userland on G5   David Woodhouse
• 32 bit userland on G5   Johannes Berg
• OpenFirmware framebuffer   Matt Sealey
• [PATCH] Compile failure fix for ppc on 2.6.17-rc4-mm3 (2nd attempt)   Mel Gorman
• OpenFirmware framebuffer   David Woodhouse
• 32 bit userland on G5   Paul Mackerras
• 32 bit userland on G5   Paul Mackerras
• [PATCH] powerpc-genirq: Use generic_handle_irq()   Benjamin Herrenschmidt
• [PATCH] powerpc-genirq: Use generic_handle_irq()   Benjamin Herrenschmidt
• 32 bit userland on G5   David Woodhouse
• 32 bit userland on G5   Paul Mackerras
• OpenFirmware framebuffer   Benjamin Herrenschmidt
• 32 bit userland on G5   David Woodhouse
• [PATCH] powerpc-genirq: Use generic_handle_irq()   Josh Boyer
• [PATCH] powerpc: Adding the use of the firmware soft-reset-nmi to kdump.   David Wilder
• [PATCH] powerpc: Use soft irq-disable on all 64-bit machines   Paul Mackerras
• [HACK] add sandpoint + flattened dt support to arch/powerpc/boot   Mark A. Greer
• [PATCH 0/3] powerpc: Instrument Hypervisor Calls   Mike Kravetz
• [PATCH 1/3] powerpc: Instrument Hypervisor Calls: merge headers   Mike Kravetz
• [PATCH 2/3] powerpc: Instrument Hypervisor Calls: add wrappers   Mike Kravetz
• [PATCH 0/3] powerpc: Instrument Hypervisor Calls: add sysfs files   Mike Kravetz
• [PATCH] powerpc: Use soft irq-disable on all 64-bit machines   Stephen Rothwell
• [PATCH] powerpc: Use soft irq-disable on all 64-bit machines   Stephen Rothwell
• [PATCH 2/3] powerpc: Instrument Hypervisor Calls: add wrappers   Arnd Bergmann
• 32 bit userland on G5   Johannes Berg
• Linux kernel 2.6 on IBM RS/6000 7025-F40   Christophe Simon
• [PATCH] ppc32: fix CPCI405 board support   Matthias Fuchs
• OpenFirmware framebuffer   Matt Sealey
• [PATCH 0/3] powerpc: Instrument Hypervisor Calls: add sysfs files   Nathan Lynch
• [PATCH/2.6.17-rc4 8/10] Add tsi108 8250 serial support   Adrian Cox
• OpenFirmware framebuffer   Benjamin Herrenschmidt
• [PATCH 0/3] powerpc: Instrument Hypervisor Calls: add sysfs files   Dave C Boutcher
• [RFC] New hcall mechanism Was: [PATCH 0/3] powerpc: Instrument Hypervisor Calls   Jimi Xenidis
• [PATCH 2/3] powerpc: Instrument Hypervisor Calls: add wrappers   Nathan Lynch
• [Alsa-devel] RFC: dma_mmap_coherent() for powerpc/ppc architecture and ALSA?   Takashi Iwai
• [PATCH 5/10 v2] Add 8641 CPU and i8259 Setup   Jon Loeliger
• OpenFirmware framebuffer   Matt Sealey
• [OOPS] 2.6.17-rc3 on an mpc8241   Guennadi Liakhovetski
• [OOPS] 2.6.17-rc3 on an mpc8241   Johannes Berg
• [OOPS] 2.6.17-rc3 on an mpc8241   Guennadi Liakhovetski
• [OOPS] 2.6.17-rc3 on an mpc8241   Guennadi Liakhovetski
• [OOPS] 2.6.17-rc3 on an mpc8241   Johannes Berg
• [OOPS] 2.6.17-rc3 on an mpc8241   Guennadi Liakhovetski
• [OOPS] 2.6.17-rc3 on an mpc8241   Johannes Berg
• [PATCH 2/3] powerpc: Instrument Hypervisor Calls: add wrappers   Paul Mackerras
• [PATCH 2/3] powerpc: Instrument Hypervisor Calls: add wrappers   Nathan Lynch
• [PATCH 2/3] powerpc: Instrument Hypervisor Calls: add wrappers   Mike Kravetz
• [PATCH/2.6.17-rc4 8/10] Add tsi108 8250 serial support   Zang Roy-r61911
• [PATCH] powerpc: kdump: Reserve the existing TCE mappings left by the first kernel   Haren Myneni
• [PATCH/2.6.17-rc4 8/10] Add tsi108 8250 serial support   Zang Roy-r61911
• [PATCH/2.6.17-rc4 8/10] Add tsi108 8250 serial support   Zang Roy-r61911
• [PATCH 2/3] powerpc: Instrument Hypervisor Calls: add wrappers   Arnd Bergmann
• [PATCH] powerpc: Fix 64k pages on non-partitioned machines   Paul Mackerras
• [PATCH] m68k: windfarm is powerpc-only, don't do it on m68k macs   Al Viro
• [PATCH 0/3] powerpc: Instrument Hypervisor Calls: add sysfs files   Christopher Yeoh
• [PATCH] powerpc: Fix 64k pages on non-partitioned machines   Arnd Bergmann
• [PATCH] powerpc: enable CPU_FTR_CI_LARGE_PAGE for cell   Arnd Bergmann
• [PATCH 2/3] powerpc: Instrument Hypervisor Calls: add wrappers   Mike Kravetz
• [PATCH 2/3] powerpc: Instrument Hypervisor Calls: add wrappers   Arnd Bergmann
• MSI support on Linux PCI implementation for Ocotea   Shawn Jin
• [PATCH]: powerpc: pseries: Print PCI slot location code on failure   Linas Vepstas
• [PATCH] powerpc: RTAS delay, fix module build breaks   John Rose
• [PATCH]: powerpc: pseries: Print PCI slot location code on failure   Paul Mackerras
• MSI support on Linux PCI implementation for Ocotea   Benjamin Herrenschmidt
• MSI support on Linux PCI implementation for Ocotea   Roland Dreier
• [PATCH] powerpc: Fix 64k pages on non-partitioned machines   Anton Blanchard
• MSI support on Linux PCI implementation for Ocotea   Shawn Jin
• [PATCH] powerpc: Use soft irq-disable on all 64-bit machines   Stephen Rothwell
• Block driver question (MPC852 with DoC)   deepesh at india.tejasnetworks.com
• secondary CPU kicking on 86xx   Jon Loeliger
• [PATCH 2/3] powerpc: Instrument Hypervisor Calls: add wrappers   Mike Kravetz
• MSI support on Linux PCI implementation for Ocotea   Shawn Jin
• MSI support on Linux PCI implementation for Ocotea   Benjamin Herrenschmidt
• secondary CPU kicking on 86xx   Benjamin Herrenschmidt
• [PATCH] Guard L3CR references with CPU_FTR_L3CR.   Jon Loeliger
• [PATCH] Prevent duplicate lmb reservations for Device Tree blob.   Jon Loeliger
• [PATCH 0/9 v3] Introduce the MPC8641 HPCN platform   Jon Loeliger
• [PATCH 1/9 v3] Add the mpc8641 hpcn Kconfig and Makefiles.   Jon Loeliger
• [PATCH 2/9 v3] Add mpc8641_hpcn_defconfig config file.   Jon Loeliger
• [PATCH 3/9 v3] Add 8641 CPU table entry.   Jon Loeliger
• [PATCH 4/9 v3] Add starting of secondary 86xx CPUs.   Jon Loeliger
• [PATCH 5/9 v3] Add the MPC8641 HPCN platform files.   Jon Loeliger
• [PATCH 6/9 v3] Add mpc8641hpcn PCI/PCI-Express platform files.   Jon Loeliger
• [PATCH 7/9 v3] Add 8641 Register space and IRQ definitions.   Jon Loeliger
• [PATCH 8/9 v3] Document I2C_MPC option for 86xx too.   Jon Loeliger
• [PATCH 9/9 v3] Add Vitesse 8244 PHY for MPC8641 HPCN platform.   Jon Loeliger
• [RFC] Interrupt mapping documentation   Benjamin Herrenschmidt
• [PATCH 4/9 v3] Add starting of secondary 86xx CPUs.   Benjamin Herrenschmidt
• [PATCH 5/9 v3] Add the MPC8641 HPCN platform files.   Benjamin Herrenschmidt
• [PATCH 5/9 v3] Add the MPC8641 HPCN platform files.   Benjamin Herrenschmidt
• CPU_FREQ any platforms?   Guennadi Liakhovetski
• [PATCH 1/9 v3] Add the mpc8641 hpcn Kconfig and Makefiles.   Kumar Gala
• [PATCH 3/9 v3] Add 8641 CPU table entry.   Kumar Gala
• [PATCH 0/9 v3] Introduce the MPC8641 HPCN platform   Kumar Gala
• [PATCH 5/9 v3] Add the MPC8641 HPCN platform files.   Kumar Gala
• [PATCH 7/9 v3] Add 8641 Register space and IRQ definitions.   Kumar Gala
• help requesting for mounting eldk tools on AMCC PPC 405EP Taihu kit   jagadeesh kalisetty
• help requesting for mounting eldk tools on AMCC PPC 405EP Taihu kit   Wolfgang Denk
• [PATCH 5/9 v3] Add the MPC8641 HPCN platform files.   Jon Loeliger
• [PATCH 4/9 v3] Add starting of secondary 86xx CPUs.   Jon Loeliger
• [PATCH 5/9 v3] Add the MPC8641 HPCN platform files.   Jon Loeliger
• L3 cache on Apple dual processor (7450 r 2.1) question   Till Wimmer
• L3 cache on Apple dual processor (7450 r 2.1) question   Olof Johansson
• OFW node names   Doug Maxey
• [patch 00/20] cell: patches for 2.6.18   arnd at arndb.de
• [patch 01/20] cell: add RAS support   arnd at arndb.de
• [patch 02/20] cell: fix interrupt priority handling   arnd at arndb.de
• [patch 03/20] cell: update defconfig   arnd at arndb.de
• [patch 04/20] cell: register SPUs as sysdevs   arnd at arndb.de
• [patch 05/20] cell: always build spu base into the kernel   arnd at arndb.de
• [patch 06/20] spufs: restore mapping of mssync register   arnd at arndb.de
• [patch 07/20] spufs: fix deadlock in spu_create error path   arnd at arndb.de
• [patch 08/20] spufs: set up correct SLB entries for 64k pages   arnd at arndb.de
• [patch 09/20] spufs: add a phys-id attribute to each SPU context   arnd at arndb.de
• [patch 10/20] spufs: fix initial state of wbox file   arnd at arndb.de
• [patch 11/20] spufs: use kzalloc in create_spu   arnd at arndb.de
• [patch 12/20] spufs: dont try to access SPE channel 1 count   arnd at arndb.de
• [patch 13/20] spufs: split the Cell BE support into generic and platform dependant parts   arnd at arndb.de
• [patch 14/20] spufs: further abstract priv1 register access   arnd at arndb.de
• [patch 15/20] spufs: fix spu irq affinity setting   arnd at arndb.de
• [patch 16/20] spufs: remove stop_code from struct spu   arnd at arndb.de
• [patch 17/20] spufs: fix Makefile for "make clean"   arnd at arndb.de
• [patch 18/20] spufs: clear class2 interrupt status before wakeup   arnd at arndb.de
• [patch 19/20] spufs: fail spu_create with invalid flags   arnd at arndb.de
• [patch 20/20] spufs: one more fix for 64k pages   arnd at arndb.de
• [PATCH]: powerpc: pseries: Print PCI slot location code on failure   Linas Vepstas
• [RFC] Interrupt mapping documentation   Becky Bruce
• [PATCH]: powerpc: pseries: Print PCI slot location code on failure   Linas Vepstas
• [PATCH] mpic: add support for serial mode interrupts   Mark A. Greer
• [PATCH] mpic: add support for serial mode interrupts   Olof Johansson
• [PATCH] mpic: add support for serial mode interrupts   Mark A. Greer
• [PATCH] Unify ppc syscall tables   Andreas Schwab
• [PATCH] mpic: add support for Time-Of-Day-Clock (TODC)   Mark A. Greer
• [PATCH] Unify ppc syscall tables   Arnd Bergmann
• [PATCH] mpic: add support for Time-Of-Day-Clock (TODC)   Hollis Blanchard
• [PATCH] mpic: add support for serial mode interrupts   Mark A. Greer
• [PATCH 5/9 v3] Add the MPC8641 HPCN platform files.   Segher Boessenkool
• OFW node names   Segher Boessenkool
• [RFC] Interrupt mapping documentation   Segher Boessenkool
• [PATCH] mpic: add support for Time-Of-Day-Clock (TODC)   Mark A. Greer
• [PATCH] mpic: add support for serial mode interrupts   Segher Boessenkool
• [PATCH 5/9 v3] Add the MPC8641 HPCN platform files.   Jon Loeliger
• [PATCH 5/9 v3] Add the MPC8641 HPCN platform files.   Segher Boessenkool
• [PATCH] mpic: add support for Time-Of-Day-Clock (TODC)   Mark A. Greer
• [RFC] Interrupt mapping documentation   Jon Loeliger
• [RFC] Interrupt mapping documentation   Segher Boessenkool
• [PATCH 5/9 v3] Add the MPC8641 HPCN platform files.   Jon Loeliger
• [RFC] Interrupt mapping documentation   Benjamin Herrenschmidt
• [RFC] Interrupt mapping documentation   Jon Loeliger
• [RFC] Interrupt mapping documentation   Benjamin Herrenschmidt
• [PATCH 5/9 v3] Add the MPC8641 HPCN platform files.   Segher Boessenkool
• OFW node names   Doug Maxey
• [PATCH 5/9 v3] Add the MPC8641 HPCN platform files.   Jon Loeliger
• [RFC] Interrupt mapping documentation   Segher Boessenkool
• [PATCH 5/9 v3] Add the MPC8641 HPCN platform files.   Segher Boessenkool
• [PATCH 5/9 v3] Add the MPC8641 HPCN platform files.   Jon Loeliger
• OFW node names   Segher Boessenkool
• [RFC] Interrupt mapping documentation   Becky Bruce
• powerpc: disable floating point exceptions for init   Arnd Bergmann
• [RFC] Interrupt mapping documentation   Segher Boessenkool
• Unable to handle kernel paging request in show_instructions   David Wilder
• Unable to handle kernel paging request in show_instructions   Arnd Bergmann
• [patch 07/20] spufs: fix deadlock in spu_create error path   Michael Ellerman
• [RFC] Interrupt mapping documentation   Benjamin Herrenschmidt
• [RFC] Interrupt mapping documentation   Jon Loeliger
• Synch question 2.6.x   Srinivas Murthy
• [PATCH] mpic: add support for serial mode interrupts   Benjamin Herrenschmidt
• Gb Ethernet on xilinx gemac IP   Xavier Grave
• [PATCH] powerpc: Dont look for class-code in pci children   Anton Blanchard
• [PATCH] powerpc: Extra sanity check in EEH code   Anton Blanchard
• [PATCH] powerpc: support ibm,extended-*-frequency properties   Anton Blanchard
• [PATCH] powerpc: support ibm,extended-*-frequency properties   Segher Boessenkool
• looking for L3CR value of Apple G4 QS 800MHz MP   Till Wimmer
• L3 cache on Apple dual processor (7450 r 2.1) question   Till Wimmer
• Unable to handle kernel paging request in show_instructions   Anton Blanchard
• help reg: transfer of files to target kernel from host(PC)   Viswanatha Reddy
• [Cbe-oss-dev] [patch 01/20] cell: add RAS support   Olof Johansson
• [Cbe-oss-dev] [patch 01/20] cell: add RAS support   Arnd Bergmann
• [PATCH] mpic: add support for serial mode interrupts   Mark A. Greer
• OF setprop question   Mark A. Greer
• [Cbe-oss-dev] [patch 01/20] cell: add RAS support   Olof Johansson
• [Cbe-oss-dev] [patch 01/20] cell: add RAS support   Geoff Levand
• [PATCH] mpic: add support for serial mode interrupts   Mark A. Greer
• [PATCH] mpic: add support for serial mode interrupts   Benjamin Herrenschmidt
• [RFC] cpu hotplug in powermac g5   Johannes Berg
• windfarm got signal   Johannes Berg
• OF setprop question   Segher Boessenkool
• [PATCH] mpic: add support for serial mode interrupts   Benjamin Herrenschmidt
• [PATCH] mpic: add support for Time-Of-Day-Clock (TODC)   Benjamin Herrenschmidt
• [Cbe-oss-dev] [patch 01/20] cell: add RAS support   Benjamin Herrenschmidt
• [PATCH] powerpc: disable OProfile for iSeries (take 2!)   Kelly Daly
• Gb Ethernet on xilinx gemac IP   GORAN GVOZDENOVIC
• [PATCH] powerpc: disable OProfile for iSeries (take 2!)   Michael Ellerman
• [PATCH] powerpc: disable OProfile for iSeries (take 2!)   Kelly Daly
• [PATCH] mpic: add support for Time-Of-Day-Clock (TODC)   Mark A. Greer
• [PATCH] powerpc: disable OProfile for iSeries (take 2!)   Stephen Rothwell
• [PATCH/2.6.17-rc6 0/4 v2] powerpc: add mpc7448hpc2 (Taiga) board support   Zang Roy-r61911
• please pull powerpc.git 'merge' branch   Paul Mackerras
• Deepak C Shetty is out of the office.   Deepak C Shetty
• Linux ppc port problem   robinpv
• [PATCH] convert powermac ide blink to new led infrastructure   Johannes Berg
• please pull powerpc.git 'merge' branch   Kumar Gala
• please pull powerpc.git 'merge' branch   Jon Loeliger
• please pull powerpc.git 'merge' branch   Kumar Gala
• please pull powerpc.git 'merge' branch   Jon Loeliger
• Linux ppc port problem   Wolfgang Denk
• Linux ppc port problem   Zhan, Rongkai
• please pull powerpc.git 'merge' branch   Paul Mackerras
• [PATCH] Don't access HID registers if running on a Hypervisor.   Jimi Xenidis
• [PATCH] Don't access HID registers if running on a Hypervisor.   Olof Johansson
• [PATCH] Don't access HID registers if running on a Hypervisor.   Paul Mackerras
• Linux ppc port problem   robinpv
• [PATCH] Don't access HID registers if running on a Hypervisor.   Jimi Xenidis
• windfarm got signal   Benjamin Herrenschmidt
• [PATCH] Don't access HID registers if running on a Hypervisor.   Jimi Xenidis
• [linux-pm] windfarm got signal   Rafael J. Wysocki
• [linux-pm] windfarm got signal   Johannes Berg
• [linux-pm] windfarm got signal   Johannes Berg
• [PATCH] Don't access HID registers if running on a Hypervisor.   Benjamin Herrenschmidt
• [linux-pm] windfarm got signal   Nigel Cunningham
• [linux-pm] windfarm got signal   Pavel Machek
• Problem for "insmod: unresolved symbol printk"   Zhou Rui
• [PATCH] Don't access HID registers if running on a Hypervisor.   Olof Johansson
• help to run the C code on AMCC PPC 405EP Kit   jagadeesh kalisetty
• [PATCH] Don't access HID registers if running on a Hypervisor.   Jimi Xenidis
• Problem for "insmod: unresolved symbol printk"   Olof Johansson
• help to run the C code on AMCC PPC 405EP Kit   Olof Johansson
• [PATCH] Remove redundant PPC_86XX check.   Jon Loeliger
• [PATCH] Move I8259 selection under MPC8641HPCN board   Jon Loeliger
• [PATCH] Remove redundant STD_MMU selection.   Jon Loeliger
• [PATCH] Remove obsolete #include <linux/config.h>.   Jon Loeliger
• [PATCH] Use IRQ and senses from OF-tree on 8641hpcn.   Jon Loeliger
• help to run the C code on AMCC PPC 405EP Kit   Wolfgang Denk
• [PATCH 0/3] powerpc: Instrument Hypervisor Calls   Mike Kravetz
• [PATCH 1/3] powerpc: Instrument Hypervisor Calls: merge headers   Mike Kravetz
• [PATCH 2/3] powerpc: Instrument Hypervisor Calls: add wrappers   Mike Kravetz
• [PATCH 3/3] powerpc: Instrument Hypervisor Calls: add debugfs files   Mike Kravetz
• Fixed PPC SHA1   linux at horizon.com
• [PATCH] Use IRQ and senses from OF-tree on 8641hpcn.   Benjamin Herrenschmidt
• [PATCH 0/3] powerpc: Instrument Hypervisor Calls   Segher Boessenkool
• Fixed PPC SHA1   linux at horizon.com
• Q about i2c controller on mpc8245   Reeve Yang
• Problem for "insmod: unresolved symbol printk"   Zhou Rui
• [PATCH] powerpc: kdump: Reserve the existing TCE mappings left by the first kernel   Haren Myneni
• Help on OHCI USB host present in SM501 chip   robinpv
• [PATCH] Remove remaining iSeries debugger cruft   Michael Ellerman
• [PATCH] Export flat device tree via debugfs for debugging   Michael Ellerman
• [PATCH 1/2] powerpc: Initialise ppc_md htab pointers earlier   Michael Ellerman
• [PATCH 2/2] Use ppc_md.hpte_insert() in htab_bolt_mapping()   Michael Ellerman
• [PATCH] Make kexec_setup() a regular initcall   Michael Ellerman
• [PATCH 1/8] Setup the boot cpu's paca pointer in C rather than asm   Michael Ellerman
• [PATCH 2/8] Assume we're on cpu 0 in early boot   Michael Ellerman
• [PATCH 3/8] Make rtas_call() safe if RTAS hasn't been initialised   Michael Ellerman
• [PATCH 4/8] Move RTAS exports next to their declarations   Michael Ellerman
• [PATCH 5/8] Setup RTAS values earlier, to enable rtas_call() earlier   Michael Ellerman
• [PATCH 6/8] Add udbg support for RTAS console   Michael Ellerman
• [PATCH 7/8] Enable the RTAS udbg console on IBM Cell Blade   Michael Ellerman
• [PATCH 8/8] Enable XMON in cell_defconfig   Michael Ellerman
• [RFC] cpu hotplug in powermac g5   Johannes Berg
• [PATCH 2/8] Assume we're on cpu 0 in early boot   Jimi Xenidis
• [PATCH] windfarm: proper try_to_freeze / signal_pending handling   Johannes Berg
• release early... powermac g5 suspend to disk   Johannes Berg
• cpu power "management" for non-dfs chips with no pmu (for instance, 750cxe and mpc7447 in pegasos)   Matt Sealey
• "merge" branch reset in powerpc.git tree   Paul Mackerras
• cpu power "management" for non-dfs chips with no pmu (for instance, 750cxe and mpc7447 in pegasos)   Jon Loeliger
• cpu power "management" for non-dfs chips with no pmu (for instance, 750cxe and mpc7447 in pegasos)   Matt Sealey
• [PATCH] Use IRQ and senses from OF-tree on 8641hpcn.   Jon Loeliger
• 8641 HPCN Flat Device Tree (was: [PATCH] Use IRQ and senses from OF-tree on 8641hpcn.)   Jon Loeliger
• cpu power "management" for non-dfs chips with no pmu (for instance, 750cxe and mpc7447 in pegasos)   Jon Loeliger
• cpu power "management" for non-dfs chips with no pmu (for instance, 750cxe and mpc7447 in pegasos)   Matt Sealey
• cpu power "management" for non-dfs chips with no pmu (for instance, 750cxe and mpc7447 in pegasos)   Raquel Velasco and Bill Buck
• 8641 open nits   Kumar Gala
• [PATCH] powerpc: Extra sanity check in EEH code   Linas Vepstas
• 8641 open nits   Jon Loeliger
• "merge" branch reset in powerpc.git tree   Dave C Boutcher
• 8641 open nits   Kumar Gala
• [PATCH 1/5] spufs: map mmio space as guarded into user space   arnd at arndb.de
• [PATCH 2/5] spufs: fix MFC command queue purge   arnd at arndb.de
• [PATCH 3/5] spufs: fix memory hotplug dependency   arnd at arndb.de
• [PATCH 4/5] spufs: fix class0 interrupt assignment   arnd at arndb.de
• [PATCH 5/5] spufs: fix spufs_mfc_flush prototype   arnd at arndb.de
• [PATCH 0/5] trivial spufs fixes   arnd at arndb.de
• "merge" branch reset in powerpc.git tree   Josh Boyer
• [PATCH 0/6] Add mpc8560 support to powerpc   Vitaly Bordug
• [RFC] implement error event delivery to user space   Arnd Bergmann
• "merge" branch reset in powerpc.git tree   Arnd Bergmann
• "merge" branch reset in powerpc.git tree   Josh Boyer
• powerpc: Adding the use of the firmware soft-reset-nmi to kdump.   David Wilder
• [PATCH 1/6] PAL: Support of the fixed PHY   Vitaly Bordug
• [PATCH 2/6] FS_ENET: Utilize Phy abstraction   Vitaly Bordug
• [PATCH 3/6] FS_ENET: use PAL for mii management (BSP part)   Vitaly Bordug
• [PATCH 4/6] FS_ENET: phydev pointer may be dereferenced without NULL check   Vitaly Bordug
• [PATCH 5/6] CPM_UART: unify clock sources   Vitaly Bordug
• [PATCH 6/6] [RFC] POWERPC: Add mpc8560 board support   Vitaly Bordug
• cpu power "management" for non-dfs chips with no pmu (for instance, 750cxe and mpc7447 in pegasos)   Guennadi Liakhovetski
• [PATCH 0/6] Add mpc8560 support to powerpc   Vitaly Bordug
• [PATCH 5/6] CPM_UART: unify clock sources   Kumar Gala
• [PATCH 5/6] CPM_UART: unify clock sources   Vitaly Bordug
• [PATCH 5/6] CPM_UART: unify clock sources   Kumar Gala
• cpu power "management" for non-dfs chips with no pmu (for instance, 750cxe and mpc7447 in pegasos)   Jon Loeliger
• [PATCH 5/6] CPM_UART: unify clock sources   Jon Loeliger
• [PATCH 6/6] [RFC] POWERPC: Add mpc8560 board support   Kumar Gala
• [PATCH 5/6] CPM_UART: unify clock sources   Kumar Gala
• [PATCH 6/6] [RFC] POWERPC: Add mpc8560 board support   Vitaly Bordug
• cpu power "management" for non-dfs chips with no pmu (for instance, 750cxe and mpc7447 in pegasos)   Guennadi Liakhovetski
• CPU 1 refused to die!   Giuliano Pochini
• [PATCH] powerpc: kdump: Reserve the existing TCE mappings left by the first kernel   Olof Johansson
• [PATCH] Remove extra local_bh_disable/enable from arch do_softirq   Paul Mackerras
• Current DTC home   Josh Boyer
• Current DTC home   Vitaly Bordug
• Current DTC home   Josh Boyer
• Current DTC home   Jon Loeliger
• Current DTC home   Jimi Xenidis
• Current DTC home   Jon Loeliger
• [PATCH 5/5] spufs: fix spufs_mfc_flush prototype   Arnd Bergmann
• [PATCH] Skip the "copy down" of the kernel if it is already at zero.   Jimi Xenidis
• [PATCH 6/6] [RFC] POWERPC: Add mpc8560 board support   Kumar Gala
• [PATCH] powerpc: build fix for ppc32 with CONFIG_KEXEC   Haren Myneni
• [RFC 01/12] snd-powermac: no longer handle anything with a layout-id property   Andreas Schwab
• [PATCH] Assume we're on cpu 0 in early boot   Michael Ellerman
• [linux-pm] windfarm got signal   Benjamin Herrenschmidt
• [PATCH] convert powermac ide blink to new led infrastructure   Benjamin Herrenschmidt
• [PATCH] Remove extra local_bh_disable/enable from arch do_softirq   Ingo Molnar
• [PATCH] Remove extra local_bh_disable/enable from arch do_softirq   Martin Schwidefsky
• [PATCH] powerpc: fix idr locking in init_new_context   Sonny Rao
• [Alsa-devel] [RFC 01/12] snd-powermac: no longer handle anything with a layout-id property   Takashi Iwai
• [Alsa-devel] [RFC 01/12] snd-powermac: no longer handle anything with a layout-id property   Andreas Schwab
• 2.6.17-mm2   Martin J. Bligh
• [RFC 01/12] snd-powermac: no longer handle anything with a layout-id property   Johannes Berg
• [PATCH] convert powermac ide blink to new led infrastructure   Johannes Berg
• [Alsa-devel] [RFC 01/12] snd-powermac: no longer handle anything with a layout-id property   Johannes Berg
• [PATCH] powerpc: remove kconfig warning   Olof Johansson
• [PATCH] fix windfarm core thread wrt. signal handling   Johannes Berg
• [PATCH] powerpc: Do a bit more cpu init cleanups   Olof Johansson
• [PATCH] fix windfarm core thread wrt. signal handling   Benjamin Herrenschmidt
• [PATCH] powerpc: Do a bit more cpu init cleanups   Benjamin Herrenschmidt
• cpu power "management" for non-dfs chips with no pmu (for instance, 750cxe and mpc7447 in pegasos)   Benjamin Herrenschmidt
• cpu power "management" for non-dfs chips with no pmu (for instance, 750cxe and mpc7447 in pegasos)   Benjamin Herrenschmidt
• Fixed PPC SHA1   Benjamin Herrenschmidt
• [PATCH] powerpc: Do a bit more cpu init cleanups   Olof Johansson
• [PATCH] powerpc: Do a bit more cpu init cleanups   Benjamin Herrenschmidt
• [PATCH] powerpc: Do a bit more cpu init cleanups   Olof Johansson
• [PATCH] Assume we're on cpu 0 in early boot   Paul Mackerras
• [PATCH] Clean up it_lp_queue.h   Stephen Rothwell
• [PATCH] update asm-powerpc/time.h   Stephen Rothwell
• [PATCH] Remove unused function call_with_mmu_off   Stephen Rothwell
• [PATCH] Consolidate some of kernel/misc*.S   Stephen Rothwell
• [PATCH] Make lparcfg.c work when both iseries and pseries are selected   Stephen Rothwell
• [PATCH] Assume we're on cpu 0 in early boot   Michael Ellerman
• [PATCH] Assume we're on cpu 0 in early boot   Michael Ellerman
• [PATCH] Make lparcfg.c work when both iseries and pseries are selected   Nathan Lynch
• [PATCH] powerpc: Do a bit more cpu init cleanups (v2)   Olof Johansson
• [PATCH] powerpc: support ibm,extended-*-frequency properties   Kumar Gala
• patches applied to powerpc.git   Paul Mackerras
• Please pull from 'for_paulus' branch of powerpc   Kumar Gala
• [PATCH] Make lparcfg.c work when both iseries and pseries are selected   Stephen Rothwell
• Please pull from 'for_paulus' branch of powerpc   Zhang Wei-r63237
• patches applied to powerpc.git   Zang Roy-r61911
• [PATCH] Make lparcfg.c work when both iseries and pseries are selected   Nathan Lynch
• snd-aoa issues & fixes   Benjamin Herrenschmidt
• [PATCH] powerpc: Do a bit more cpu init cleanups (v3)   Olof Johansson
• [PATCH] convert powermac ide blink to new led infrastructure   Richard Purdie
• [PATCH] convert powermac ide blink to new led infrastructure   Johannes Berg
• [PATCH] powerpc: U4 DART improvements   Olof Johansson
• 2.6.17-mm2   Andrew Morton
• 2.6.17-mm2   Andrew Morton
• [PATCH] powerpc: support ibm,extended-*-frequency properties   Segher Boessenkool
• [PATCH] powerpc: support ibm,extended-*-frequency properties   Anton Blanchard
• Please pull from 'for_paulus' branch of powerpc   Kumar Gala
• backlight control broken in current Linus' and Paulus' trees   Aristeu Sergio Rozanski Filho
• backlight control broken in current Linus' and Paulus' trees   Michael Hanselmann
• [PATCH 0/7] Add mpc8360epb and QE support to powerpc   Li Yang-r58472
• [PATCH 1/7] powerpc: Add mpc8360epb platform support   Li Yang-r58472
• [PATCH 2/7] mtd: Add map file for mpc83xx boards   Li Yang-r58472
• [PATCH 3/7] powerpc: Add QE library qe_lib--common files   Li Yang-r58472
• [PATCH 4/7] powerpc: Add QE library qe_lib--ucc support   Li Yang-r58472
• [PATCH 5/7] powerpc: Add QE library qe_lib--common headers   Li Yang-r58472
• [PATCH 7/7] powerpc: mpc8360epb platform default config   Li Yang-r58472
• [PATCH 2/7] mtd: Add map file for mpc83xx boards   David Woodhouse
• 2.6.17-mm2   Martin J. Bligh
• patches applied to powerpc.git   Sonny Rao
• 2.6.17-mm2   Andy Whitcroft
• 2.6.17-mm2   Jeremy Fitzhardinge
• [PATCH 1/7] powerpc: Add mpc8360epb platform support   Vitaly Bordug
• [PATCH 3/7] powerpc: Add QE library qe_lib--common files   Christoph Hellwig
• [PATCH 4/7] powerpc: Add QE library qe_lib--ucc support   Christoph Hellwig
• vm_region_alloc failing   Owen Stampflee
• 2.6.17-mm2   Andrew Morton
• [PATCH 3/7] powerpc: Add QE library qe_lib--common files   Kumar Gala
• 2.6.17-mm2   Jeremy Fitzhardinge
• 2.6.17-mm2   Martin Bligh
• 2.6.17-mm2   Andrew Morton
• [Alsa-devel] RFC: dma_mmap_coherent() for powerpc/ppc architecture and ALSA?   Gerhard Pircher
• [PATCH] todc: add support for Time-Of-Day-Clock   Mark A. Greer
• [linux-pm] release early... powermac g5 suspend to disk   Pavel Machek
• [PATCH 6/7] net: Add QE UCC Gigabit Ethernet driver   Andrew Morton
• Please pull from 'for_paulus' branch of powerpc   Jon Loeliger
• 2.6.17-mm2   Martin J. Bligh
• [PATCH 1/3] Add support for the Freescale MPC8349E-mITX eval board   Kim Phillips
• [PATCH 2/3] Add support for the Cicada 8201 PHY   Kim Phillips
• [PATCH 3/3] provide default configuration for MPC8349mITX board   Kim Phillips
• Please pull from 'for_paulus' branch of powerpc   Zhang Wei-r63237
• [PATCH] Make lparcfg.c work when both iseries and pseries are selected   Stephen Rothwell
• Please pull from 'for_paulus' branch of powerpc   Kumar Gala
• [PATCH 1/3] Add support for the Freescale MPC8349E-mITX eval board   Kumar Gala
• patches applied to powerpc.git   Paul Mackerras
• Please pull from 'for_paulus' branch of powerpc   Zhang Wei-r63237
• patches applied to powerpc.git   Zang Roy-r61911
• new IRQ work status   Benjamin Herrenschmidt
• Please pull from 'for_paulus' branch of powerpc   Benjamin Herrenschmidt
• [Alsa-devel] RFC: dma_mmap_coherent() for powerpc/ppc architecture and ALSA?   Takashi Iwai
• [PATCH 1/7] powerpc: Add mpc8360epb platform support   Li Yang-r58472
• [PATCH] [powerpc] change get_property to return void *   Jeremy Kerr
• [PATCH] [powerpc] change get_property to return void *   Benjamin Herrenschmidt
• [PATCH] [powerpc] change get_property to return void *   Benjamin Herrenschmidt
• please pull powerpc.git 'master' branch   Paul Mackerras
• [PATCH] Add QE device tree definition   Li Yang-r58472
• [0/5][POWERPC] boot: create zImage.kexec   Milton Miller
• [1/5][POWERPC] boot: prepare for zImage.kexec   Milton Miller
• new IRQ work status   Arnd Bergmann
• [2/5][POWERPC] boot: Add kexec callable zImage wrapper   Milton Miller
• [3/5][POWERPC] boot: use more Kbuild rules   Milton Miller
• [4/5][POWERPC] boot: Makefile and linker scripts for zImage.kexec   Milton Miller
• [5/5][POWERPC] boot: generate lds file from lds.S   Milton Miller
• new IRQ work status   Segher Boessenkool
• [PATCH 1/3] Add support for the Freescale MPC8349E-mITX eval board   Kim Phillips
• [PATCH 3/7] powerpc: Add QE library qe_lib--common files   Gridish Shlomi-RM96313
• [linux-pm] release early... powermac g5 suspend to disk   Johannes Berg
• [PATCH 3/7] powerpc: Add QE library qe_lib--common files   Kumar Gala
• [PATCH 1/3] Add support for the Freescale MPC8349E-mITX eval board   Kumar Gala
• [PATCH 3/7] powerpc: Add QE library qe_lib--common files   Gridish Shlomi-RM96313
• [PATCH 1/7] powerpc: Add mpc8360epb platform support   Andy Fleming
• [PATCH 1/7] powerpc: Add mpc8360epb platform support   Vitaly Bordug
• [PATCH 1/3] Add support for the Freescale MPC8349E-mITX eval board   Kim Phillips
• [PATCH 1/7] powerpc: Add mpc8360epb platform support   Andy Fleming
• [PATCH 1/7] powerpc: Add mpc8360epb platform support   Vitaly Bordug
• [Alsa-devel] [RFC 01/12] snd-powermac: no longer handle anything with a layout-id property   Andreas Schwab
• [PATCH 1/7] powerpc: Add mpc8360epb platform support   Andy Fleming
• [Alsa-devel] RFC: dma_mmap_coherent() for powerpc/ppc architecture and ALSA?   Gerhard Pircher
• [PATCH] powerpc: support ibm,extended-*-frequency properties   Olof Johansson
• [PATCH 1/7] powerpc: Add mpc8360epb platform support   Vitaly Bordug
• [PATCH] Xmon stops CPUs for kdump   David Wilder
• [Alsa-devel] [RFC 01/12] snd-powermac: no longer handle anything with a layout-id property   Lee Revell
• new IRQ work status   Benjamin Herrenschmidt
• [Alsa-devel] [RFC 01/12] snd-powermac: no longer handle anything with a layout-id property   Andreas Schwab
• [PATCH] Add QE device tree definition   Kumar Gala
• [PATCH] [powerpc] cleanup of_device_(un)register   Jeremy Kerr
• [PATCH] Add QE device tree definition   Li Yang-r58472
• [FYI] dts file for MPC8360EPB support   Li Yang-r58472
• [PATCH] Add QE device tree definition   Kumar Gala
• [FYI] dts file for MPC8360EPB support   Kumar Gala
• [PATCH 1/3] Add support for the Freescale MPC8349E-mITX eval board   Kumar Gala
• [PATCH] todc: add support for Time-Of-Day-Clock   Kumar Gala
• [FYI] dts file for MPC8360EPB support   Li Yang-r58472
• [PATCH] Add QE device tree definition   Li Yang-r58472
• new IRQ work status   Bob Brose
• [PATCH] Add QE device tree definition   Kumar Gala
• [PATCH] Add QE device tree definition   Li Yang-r58472
• [PATCH] Add QE device tree definition   Kumar Gala
• [PATCH] [powerpc] cleanup of_device_(un)register   Jeremy Kerr
• "boot: mem=1024M" causes only one CPU is brought up in 2.6.17-mm4   Raid Cheng
• new IRQ work status   Benjamin Herrenschmidt
• new irq works status (#2)   Benjamin Herrenschmidt
• "boot: mem=1024M" causes only one CPU is brought up in 2.6.17-mm4   Michael Ellerman
• new irq works status (#2)   Benjamin Herrenschmidt
• [PATCH 1/7] powerpc: Add mpc8360epb platform support   Li Yang-r58472
• [Alsa-devel] RFC: dma_mmap_coherent() for powerpc/ppc architecture and ALSA?   Takashi Iwai
• [Alsa-devel] [RFC 01/12] snd-powermac: no longer handle anything with a layout-id property   Takashi Iwai
• [PATCH 1/7] powerpc: Add mpc8360epb platform support   Li Yang-r58472
• [PATCH 1/7 v2] powerpc: Add mpc8360epb platform support   Li Yang-r58472
• [PATCH 1/7 v2] powerpc: Add mpc8360epb platform support   Li Yang-r58472
• sound connector detection   Johannes Berg
• [PATCH] powerpc:Fix rheap alignment problem   Li Yang-r58472
• [PATCH 4/7 v2] powerpc: Add QE library qe_lib--ucc support   Li Yang-r58472
• [PATCH 3/7 v2] powerpc: Add QE library qe_lib--common files   Li Yang-r58472
• [PATCH 5/7 v2] powerpc: Add QE library qe_lib--common headers   Li Yang-r58472
• [PATCH 7/7 v2] powerpc: mpc8360epb platform default config   Li Yang-r58472

Last message date: Fri Jun 30 23:52:40 EST 2006
Archived on: Fri Jun 5 17:12:39 EST 2009

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...