[PATCH 5/9 v3] Add the MPC8641 HPCN platform files.
Jon Loeliger
jdl at jdl.com
Sun Jun 18 08:52:45 EST 2006
Signed-off-by: Xianghua Xiao <x.xiao at freescale.com>
Signed-off-by: Haiying Wang <Haiying.Wang at freescale.com>
Signed-off-by: Wei Zhang <Wei.Zhang at freescale.com>
Signed-off-by: Jon Loeliger <jdl at freescale.com>
---
arch/powerpc/platforms/86xx/mpc8641_hpcn.h | 54 +++++
arch/powerpc/platforms/86xx/mpc86xx.h | 28 ++
arch/powerpc/platforms/86xx/mpc86xx_hpcn.c | 326 ++++++++++++++++++++++++++++
arch/powerpc/platforms/86xx/mpc86xx_smp.c | 117 ++++++++++
4 files changed, 525 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/platforms/86xx/mpc8641_hpcn.h b/arch/powerpc/platforms/86xx/mpc8641_hpcn.h
new file mode 100644
index 0000000..5042253
--- /dev/null
+++ b/arch/powerpc/platforms/86xx/mpc8641_hpcn.h
@@ -0,0 +1,54 @@
+/*
+ * MPC8641 HPCN board definitions
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Author: Xianghua Xiao <x.xiao at freescale.com>
+ */
+
+#ifndef __MPC8641_HPCN_H__
+#define __MPC8641_HPCN_H__
+
+#include <linux/config.h>
+#include <linux/init.h>
+
+/* PCI interrupt controller */
+#define PIRQA 3
+#define PIRQB 4
+#define PIRQC 5
+#define PIRQD 6
+#define PIRQ7 7
+#define PIRQE 9
+#define PIRQF 10
+#define PIRQG 11
+#define PIRQH 12
+
+/* PCI-Express memory map */
+#define MPC86XX_PCIE_LOWER_IO 0x00000000
+#define MPC86XX_PCIE_UPPER_IO 0x00ffffff
+
+#define MPC86XX_PCIE_LOWER_MEM 0x80000000
+#define MPC86XX_PCIE_UPPER_MEM 0x9fffffff
+
+#define MPC86XX_PCIE_IO_BASE 0xe2000000
+#define MPC86XX_PCIE_MEM_OFFSET 0x00000000
+
+#define MPC86XX_PCIE_IO_SIZE 0x01000000
+
+#define PCIE1_CFG_ADDR_OFFSET (0x8000)
+#define PCIE1_CFG_DATA_OFFSET (0x8004)
+
+#define PCIE2_CFG_ADDR_OFFSET (0x9000)
+#define PCIE2_CFG_DATA_OFFSET (0x9004)
+
+#define MPC86xx_PCIE_OFFSET PCIE1_CFG_ADDR_OFFSET
+#define MPC86xx_PCIE_SIZE (0x1000)
+
+#define MPC86XX_RSTCR_OFFSET (0xe00b0) /* Reset Control Register */
+
+#endif /* __MPC8641_HPCN_H__ */
diff --git a/arch/powerpc/platforms/86xx/mpc86xx.h b/arch/powerpc/platforms/86xx/mpc86xx.h
new file mode 100644
index 0000000..e3c9e4f
--- /dev/null
+++ b/arch/powerpc/platforms/86xx/mpc86xx.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __MPC86XX_H__
+#define __MPC86XX_H__
+
+/*
+ * Declaration for the various functions exported by the
+ * mpc86xx_* files. Mostly for use by mpc86xx_setup().
+ */
+
+extern int __init add_bridge(struct device_node *dev);
+
+extern void __init setup_indirect_pcie(struct pci_controller *hose,
+ u32 cfg_addr, u32 cfg_data);
+extern void __init setup_indirect_pcie_nomap(struct pci_controller *hose,
+ void __iomem *cfg_addr,
+ void __iomem *cfg_data);
+
+extern void __init mpc86xx_smp_init(void);
+
+#endif /* __MPC86XX_H__ */
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
new file mode 100644
index 0000000..483c21d
--- /dev/null
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -0,0 +1,326 @@
+/*
+ * MPC86xx HPCN board specific routines
+ *
+ * Recode: ZHANG WEI <wei.zhang at freescale.com>
+ * Initial author: Xianghua Xiao <x.xiao at freescale.com>
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpc86xx.h>
+#include <asm/prom.h>
+#include <mm/mmu_decl.h>
+#include <asm/udbg.h>
+#include <asm/i8259.h>
+
+#include <asm/mpic.h>
+
+#include <sysdev/fsl_soc.h>
+
+#include "mpc86xx.h"
+
+#ifndef CONFIG_PCI
+unsigned long isa_io_base = 0;
+unsigned long isa_mem_base = 0;
+unsigned long pci_dram_offset = 0;
+#endif
+
+
+/*
+ * Internal interrupts are all Level Sensitive, and Positive Polarity
+ */
+
+static u_char mpc86xx_hpcn_openpic_initsenses[] __initdata = {
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 0: Reserved */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 1: MCM */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 2: DDR DRAM */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 3: LBIU */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 4: DMA 0 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 5: DMA 1 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 6: DMA 2 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 7: DMA 3 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 8: PCIE1 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 9: PCIE2 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 10: Reserved */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 11: Reserved */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 12: DUART2 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 13: TSEC 1 Transmit */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 14: TSEC 1 Receive */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 15: TSEC 3 transmit */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 16: TSEC 3 receive */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 17: TSEC 3 error */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 18: TSEC 1 Receive/Transmit Error */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 19: TSEC 2 Transmit */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 20: TSEC 2 Receive */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 21: TSEC 4 transmit */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 22: TSEC 4 receive */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 23: TSEC 4 error */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 24: TSEC 2 Receive/Transmit Error */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 25: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 26: DUART1 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 27: I2C */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 28: Performance Monitor */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 29: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 30: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 31: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 32: SRIO error/write-port unit */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 33: SRIO outbound doorbell */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 34: SRIO inbound doorbell */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 35: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 36: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 37: SRIO outbound message unit 1 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 38: SRIO inbound message unit 1 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 39: SRIO outbound message unit 2 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 40: SRIO inbound message unit 2 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 41: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 42: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 43: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 44: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 45: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 46: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 47: Unused */
+ 0x0, /* External 0: */
+ 0x0, /* External 1: */
+ 0x0, /* External 2: */
+ 0x0, /* External 3: */
+ 0x0, /* External 4: */
+ 0x0, /* External 5: */
+ 0x0, /* External 6: */
+ 0x0, /* External 7: */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 8: Pixis FPGA */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* External 9: ULI 8259 INTR Cascade */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 10: Quad ETH PHY */
+ 0x0, /* External 11: */
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+};
+
+
+void __init
+mpc86xx_hpcn_init_irq(void)
+{
+ struct mpic *mpic1;
+ phys_addr_t openpic_paddr;
+
+ /* Determine the Physical Address of the OpenPIC regs */
+ openpic_paddr = get_immrbase() + MPC86xx_OPENPIC_OFFSET;
+
+ /* Alloc mpic structure and per isu has 16 INT entries. */
+ mpic1 = mpic_alloc(openpic_paddr,
+ MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+ 16, MPC86xx_OPENPIC_IRQ_OFFSET, 0, 250,
+ mpc86xx_hpcn_openpic_initsenses,
+ sizeof(mpc86xx_hpcn_openpic_initsenses),
+ " MPIC ");
+ BUG_ON(mpic1 == NULL);
+
+ /* 48 Internal Interrupts */
+ mpic_assign_isu(mpic1, 0, openpic_paddr + 0x10200);
+ mpic_assign_isu(mpic1, 1, openpic_paddr + 0x10400);
+ mpic_assign_isu(mpic1, 2, openpic_paddr + 0x10600);
+
+ /* 16 External interrupts */
+ mpic_assign_isu(mpic1, 3, openpic_paddr + 0x10000);
+
+ mpic_init(mpic1);
+
+#ifdef CONFIG_PCI
+ mpic_setup_cascade(MPC86xx_IRQ_EXT9, i8259_irq_cascade, NULL);
+ i8259_init(0, I8259_OFFSET);
+#endif
+}
+
+
+
+#ifdef CONFIG_PCI
+/*
+ * interrupt routing
+ */
+
+int
+mpc86xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+ static char pci_irq_table[][4] = {
+ /*
+ * PCI IDSEL/INTPIN->INTLINE
+ * A B C D
+ */
+ {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 17 -- PCI Slot 1 */
+ {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 18 -- PCI Slot 2 */
+ {0, 0, 0, 0}, /* IDSEL 19 */
+ {0, 0, 0, 0}, /* IDSEL 20 */
+ {0, 0, 0, 0}, /* IDSEL 21 */
+ {0, 0, 0, 0}, /* IDSEL 22 */
+ {0, 0, 0, 0}, /* IDSEL 23 */
+ {0, 0, 0, 0}, /* IDSEL 24 */
+ {0, 0, 0, 0}, /* IDSEL 25 */
+ {PIRQD, PIRQA, PIRQB, PIRQC}, /* IDSEL 26 -- PCI Bridge*/
+ {PIRQC, 0, 0, 0}, /* IDSEL 27 -- LAN */
+ {PIRQE, PIRQF, PIRQH, PIRQ7}, /* IDSEL 28 -- USB 1.1 */
+ {PIRQE, PIRQF, PIRQG, 0}, /* IDSEL 29 -- Audio & Modem */
+ {PIRQH, 0, 0, 0}, /* IDSEL 30 -- LPC & PMU*/
+ {PIRQD, 0, 0, 0}, /* IDSEL 31 -- ATA */
+ };
+
+ const long min_idsel = 17, max_idsel = 31, irqs_per_slot = 4;
+ return PCI_IRQ_TABLE_LOOKUP + I8259_OFFSET;
+}
+
+
+int
+mpc86xx_exclude_device(u_char bus, u_char devfn)
+{
+#if !defined(CONFIG_PCI)
+ if (bus == 0 && PCI_SLOT(devfn) == 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+#endif
+
+ return PCIBIOS_SUCCESSFUL;
+}
+#endif /* CONFIG_PCI */
+
+
+static void __init
+mpc86xx_hpcn_setup_arch(void)
+{
+ struct device_node *np;
+
+ if (ppc_md.progress)
+ ppc_md.progress("mpc86xx_hpcn_setup_arch()", 0);
+
+ np = of_find_node_by_type(NULL, "cpu");
+ if (np != 0) {
+ unsigned int *fp;
+
+ fp = (int *)get_property(np, "clock-frequency", NULL);
+ if (fp != 0)
+ loops_per_jiffy = *fp / HZ;
+ else
+ loops_per_jiffy = 50000000 / HZ;
+ of_node_put(np);
+ }
+
+#ifdef CONFIG_PCI
+ for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
+ add_bridge(np);
+
+ ppc_md.pci_swizzle = common_swizzle;
+ ppc_md.pci_map_irq = mpc86xx_map_irq;
+ ppc_md.pci_exclude_device = mpc86xx_exclude_device;
+#endif
+
+ printk("MPC86xx HPCN board from Freescale Semiconductor\n");
+
+#ifdef CONFIG_ROOT_NFS
+ ROOT_DEV = Root_NFS;
+#else
+ ROOT_DEV = Root_HDA1;
+#endif
+
+#ifdef CONFIG_SMP
+ mpc86xx_smp_init();
+#endif
+}
+
+
+void
+mpc86xx_hpcn_show_cpuinfo(struct seq_file *m)
+{
+ struct device_node *root;
+ uint memsize = total_memory;
+ const char *model = "";
+ uint svid = mfspr(SPRN_SVR);
+
+ seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
+
+ root = of_find_node_by_path("/");
+ if (root)
+ model = get_property(root, "model", NULL);
+ seq_printf(m, "Machine\t\t: %s\n", model);
+ of_node_put(root);
+
+ seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+ seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
+}
+
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init mpc86xx_hpcn_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (of_flat_dt_is_compatible(root, "mpc86xx"))
+ return 1; /* Looks good */
+
+ return 0;
+}
+
+
+void
+mpc86xx_restart(char *cmd)
+{
+ void __iomem *rstcr;
+
+ rstcr = ioremap(get_immrbase() + MPC86XX_RSTCR_OFFSET, 0x100);
+
+ local_irq_disable();
+
+ /* Assert reset request to Reset Control Register */
+ out_be32(rstcr, 0x2);
+
+ /* not reached */
+}
+
+
+long __init
+mpc86xx_time_init(void)
+{
+ unsigned int temp;
+
+ /* Set the time base to zero */
+ mtspr(SPRN_TBWL, 0);
+ mtspr(SPRN_TBWU, 0);
+
+ temp = mfspr(SPRN_HID0);
+ temp |= HID0_TBEN;
+ mtspr(SPRN_HID0, temp);
+ asm volatile("isync");
+
+ return 0;
+}
+
+
+define_machine(mpc86xx_hpcn) {
+ .name = "MPC86xx HPCN",
+ .probe = mpc86xx_hpcn_probe,
+ .setup_arch = mpc86xx_hpcn_setup_arch,
+ .init_IRQ = mpc86xx_hpcn_init_irq,
+ .show_cpuinfo = mpc86xx_hpcn_show_cpuinfo,
+ .get_irq = mpic_get_irq,
+ .restart = mpc86xx_restart,
+ .time_init = mpc86xx_time_init,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_smp.c b/arch/powerpc/platforms/86xx/mpc86xx_smp.c
new file mode 100644
index 0000000..944ec4b
--- /dev/null
+++ b/arch/powerpc/platforms/86xx/mpc86xx_smp.c
@@ -0,0 +1,117 @@
+/*
+ * Author: Xianghua Xiao <x.xiao at freescale.com>
+ * Zhang Wei <wei.zhang at freescale.com>
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/pci-bridge.h>
+#include <asm-powerpc/mpic.h>
+#include <asm/mpc86xx.h>
+#include <asm/cacheflush.h>
+
+#include <sysdev/fsl_soc.h>
+
+#include "mpc86xx.h"
+
+extern void __secondary_start_mpc86xx(void);
+extern unsigned long __secondary_hold_acknowledge;
+
+
+static void __init
+smp_86xx_release_core(int nr)
+{
+ void *mcm_vaddr;
+ unsigned long vaddr, pcr;
+
+ if (nr < 0 || nr >= NR_CPUS)
+ return;
+
+ /*
+ * Startup Core #nr.
+ */
+ mcm_vaddr = ioremap(get_immrbase() + MPC86xx_MCM_OFFSET,
+ MPC86xx_MCM_SIZE);
+ vaddr = (unsigned long)mcm_vaddr + MCM_PORT_CONFIG_OFFSET;
+ pcr = in_be32((volatile unsigned *)vaddr);
+ pcr |= 1 << (nr + 24);
+ out_be32((volatile unsigned *)vaddr, pcr);
+}
+
+
+static void __init
+smp_86xx_kick_cpu(int nr)
+{
+ unsigned int save_vector;
+ unsigned long target, flags;
+ int n = 0;
+ volatile unsigned int *vector
+ = (volatile unsigned int *)(KERNELBASE + 0x100);
+
+ if (nr < 0 || nr >= NR_CPUS)
+ return;
+
+ pr_debug("smp_86xx_kick_cpu: kick CPU #%d\n", nr);
+
+ local_irq_save(flags);
+ local_irq_disable();
+
+ /* Save reset vector */
+ save_vector = *vector;
+
+ /* Setup fake reset vector to call __secondary_start_mpc86xx. */
+ target = (unsigned long) __secondary_start_mpc86xx;
+ create_branch((unsigned long)vector, target, BRANCH_SET_LINK);
+
+ /* Kick that CPU */
+ smp_86xx_release_core(nr);
+
+ /* Wait a bit for the CPU to take the exception. */
+ while ((__secondary_hold_acknowledge != nr) && (n++, n < 1000))
+ mdelay(1);
+
+ /* Restore the exception vector */
+ *vector = save_vector;
+ flush_icache_range((unsigned long) vector, (unsigned long) vector + 4);
+
+ local_irq_restore(flags);
+
+ pr_debug("wait CPU #%d for %d msecs.\n", nr, n);
+}
+
+
+static void __init
+smp_86xx_setup_cpu(int cpu_nr)
+{
+ mpic_setup_this_cpu();
+}
+
+
+struct smp_ops_t smp_86xx_ops = {
+ .message_pass = smp_mpic_message_pass,
+ .probe = smp_mpic_probe,
+ .kick_cpu = smp_86xx_kick_cpu,
+ .setup_cpu = smp_86xx_setup_cpu,
+ .take_timebase = smp_generic_take_timebase,
+ .give_timebase = smp_generic_give_timebase,
+};
+
+
+void __init
+mpc86xx_smp_init(void)
+{
+ smp_ops = &smp_86xx_ops;
+}
More information about the Linuxppc-dev
mailing list