[PATCH 5/7] powerpc: Add QE library qe_lib--common headers
Li Yang-r58472
LeoLi at freescale.com
Thu Jun 29 00:23:37 EST 2006
Signed-off-by: Shlomi Gridish <gridish at freescale.com>
Signed-off-by: Li Yang <leoli at freescale.com>
Signed-off-by: Kim Phillips <kim.phillips at freescale.com>
---
include/asm-powerpc/immap_qe.h | 509 ++++++++++++++++++++++++++++++++++++++++
include/asm-powerpc/irq.h | 11 +
include/asm-powerpc/qe.h | 498 +++++++++++++++++++++++++++++++++++++++
include/asm-powerpc/qe_ic.h | 131 ++++++++++
include/asm-powerpc/ucc.h | 89 +++++++
include/asm-powerpc/ucc_fast.h | 259 ++++++++++++++++++++
include/asm-powerpc/ucc_slow.h | 309 ++++++++++++++++++++++++
include/asm-ppc/mpc83xx.h | 42 +++
include/linux/fsl_devices.h | 39 +++
9 files changed, 1885 insertions(+), 2 deletions(-)
diff --git a/include/asm-powerpc/immap_qe.h b/include/asm-powerpc/immap_qe.h
new file mode 100644
index 0000000..a392431
--- /dev/null
+++ b/include/asm-powerpc/immap_qe.h
@@ -0,0 +1,509 @@
+/*
+ * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
+ *
+ * Author: Shlomi Gridish <gridish at freescale.com>
+ *
+ * Description:
+ * QUICC Engine (QE) Internal Memory Map.
+ * The Internal Memory Map for devices with QE on them. This
+ * is the superset of all QE devices (8360, etc.).
+ *
+ * Changelog:
+ * Jun 28, 2006 Li Yang <LeoLi at freescale.com>
+ * - Reorganized as qe_lib
+ * - Merged to powerpc arch; add device tree support
+ * - Style fixes
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifdef __KERNEL__
+#ifndef __IMMAP_QE_H__
+#define __IMMAP_QE_H__
+
+#include <linux/kernel.h>
+
+#define QE_IMMAP_SIZE (1024 * 1024) /* 1MB from 1MB+IMMR */
+
+/* QE I-RAM
+*/
+typedef struct qe_iram {
+ u32 iadd; /* I-RAM Address Register */
+ u32 idata; /* I-RAM Data Register */
+ u8 res0[0x78];
+} __attribute__ ((packed)) qe_iram_t;
+
+/* QE Interrupt Controller
+*/
+typedef struct qe_ic {
+ u32 qicr;
+ u32 qivec;
+ u32 qripnr;
+ u32 qipnr;
+ u32 qipxcc;
+ u32 qipycc;
+ u32 qipwcc;
+ u32 qipzcc;
+ u32 qimr;
+ u32 qrimr;
+ u32 qicnr;
+ u8 res0[0x4];
+ u32 qiprta;
+ u32 qiprtb;
+ u8 res1[0x4];
+ u32 qricr;
+ u8 res2[0x20];
+ u32 qhivec;
+ u8 res3[0x1C];
+} __attribute__ ((packed)) qe_ic_t;
+
+/* Communications Processor
+*/
+typedef struct cp_qe {
+ u32 cecr; /* QE command register */
+ u32 ceccr; /* QE controller configuration register */
+ u32 cecdr; /* QE command data register */
+ u8 res0[0xA];
+ u16 ceter; /* QE timer event register */
+ u8 res1[0x2];
+ u16 cetmr; /* QE timers mask register */
+ u32 cetscr; /* QE time-stamp timer control register */
+ u32 cetsr1; /* QE time-stamp register 1 */
+ u32 cetsr2; /* QE time-stamp register 2 */
+ u8 res2[0x8];
+ u32 cevter; /* QE virtual tasks event register */
+ u32 cevtmr; /* QE virtual tasks mask register */
+ u16 cercr; /* QE RAM control register */
+ u8 res3[0x2];
+ u8 res4[0x24];
+ u16 ceexe1; /* QE external request 1 event register */
+ u8 res5[0x2];
+ u16 ceexm1; /* QE external request 1 mask register */
+ u8 res6[0x2];
+ u16 ceexe2; /* QE external request 2 event register */
+ u8 res7[0x2];
+ u16 ceexm2; /* QE external request 2 mask register */
+ u8 res8[0x2];
+ u16 ceexe3; /* QE external request 3 event register */
+ u8 res9[0x2];
+ u16 ceexm3; /* QE external request 3 mask register */
+ u8 res10[0x2];
+ u16 ceexe4; /* QE external request 4 event register */
+ u8 res11[0x2];
+ u16 ceexm4; /* QE external request 4 mask register */
+ u8 res12[0x2];
+ u8 res13[0x280];
+} __attribute__ ((packed)) cp_qe_t;
+
+/* QE Multiplexer
+*/
+typedef struct qe_mux {
+ u32 cmxgcr; /* CMX general clock route register */
+ u32 cmxsi1cr_l; /* CMX SI1 clock route low register */
+ u32 cmxsi1cr_h; /* CMX SI1 clock route high register */
+ u32 cmxsi1syr; /* CMX SI1 SYNC route register */
+ u32 cmxucr1; /* CMX UCC1, UCC3 clock route register */
+ u32 cmxucr2; /* CMX UCC5, UCC7 clock route register */
+ u32 cmxucr3; /* CMX UCC2, UCC4 clock route register */
+ u32 cmxucr4; /* CMX UCC6, UCC8 clock route register */
+ u32 cmxupcr; /* CMX UPC clock route register */
+ u8 res0[0x1C];
+} __attribute__ ((packed)) qe_mux_t;
+
+/* QE Timers
+*/
+typedef struct qe_timers {
+ u8 gtcfr1; /* Timer 1 and Timer 2 global configuration
+ register */
+ u8 res0[0x3];
+ u8 gtcfr2; /* Timer 3 and timer 4 global configuration
+ register */
+ u8 res1[0xB];
+ u16 gtmdr1; /* Timer 1 mode register */
+ u16 gtmdr2; /* Timer 2 mode register */
+ u16 gtrfr1; /* Timer 1 reference register */
+ u16 gtrfr2; /* Timer 2 reference register */
+ u16 gtcpr1; /* Timer 1 capture register */
+ u16 gtcpr2; /* Timer 2 capture register */
+ u16 gtcnr1; /* Timer 1 counter */
+ u16 gtcnr2; /* Timer 2 counter */
+ u16 gtmdr3; /* Timer 3 mode register */
+ u16 gtmdr4; /* Timer 4 mode register */
+ u16 gtrfr3; /* Timer 3 reference register */
+ u16 gtrfr4; /* Timer 4 reference register */
+ u16 gtcpr3; /* Timer 3 capture register */
+ u16 gtcpr4; /* Timer 4 capture register */
+ u16 gtcnr3; /* Timer 3 counter */
+ u16 gtcnr4; /* Timer 4 counter */
+ u16 gtevr1; /* Timer 1 event register */
+ u16 gtevr2; /* Timer 2 event register */
+ u16 gtevr3; /* Timer 3 event register */
+ u16 gtevr4; /* Timer 4 event register */
+ u16 gtps; /* Timer 1 prescale register */
+ u8 res2[0x46];
+} __attribute__ ((packed)) qe_timers_t;
+
+/* BRG
+*/
+typedef struct qe_brg {
+ u32 brgc1; /* BRG1 configuration register */
+ u32 brgc2; /* BRG2 configuration register */
+ u32 brgc3; /* BRG3 configuration register */
+ u32 brgc4; /* BRG4 configuration register */
+ u32 brgc5; /* BRG5 configuration register */
+ u32 brgc6; /* BRG6 configuration register */
+ u32 brgc7; /* BRG7 configuration register */
+ u32 brgc8; /* BRG8 configuration register */
+ u32 brgc9; /* BRG9 configuration register */
+ u32 brgc10; /* BRG10 configuration register */
+ u32 brgc11; /* BRG11 configuration register */
+ u32 brgc12; /* BRG12 configuration register */
+ u32 brgc13; /* BRG13 configuration register */
+ u32 brgc14; /* BRG14 configuration register */
+ u32 brgc15; /* BRG15 configuration register */
+ u32 brgc16; /* BRG16 configuration register */
+ u8 res0[0x40];
+} __attribute__ ((packed)) qe_brg_t;
+
+/* SPI
+*/
+typedef struct spi {
+ u8 res0[0x20];
+ u32 spmode; /* SPI mode register */
+ u8 res1[0x2];
+ u8 spie; /* SPI event register */
+ u8 res2[0x1];
+ u8 res3[0x2];
+ u8 spim; /* SPI mask register */
+ u8 res4[0x1];
+ u8 res5[0x1];
+ u8 spcom; /* SPI command register */
+ u8 res6[0x2];
+ u32 spitd; /* SPI transmit data register (cpu mode) */
+ u32 spird; /* SPI receive data register (cpu mode) */
+ u8 res7[0x8];
+} __attribute__ ((packed)) spi_t;
+
+/* SI
+*/
+typedef struct si1 {
+ u16 siamr1; /* SI1 TDMA mode register */
+ u16 sibmr1; /* SI1 TDMB mode register */
+ u16 sicmr1; /* SI1 TDMC mode register */
+ u16 sidmr1; /* SI1 TDMD mode register */
+ u8 siglmr1_h; /* SI1 global mode register high */
+ u8 res0[0x1];
+ u8 sicmdr1_h; /* SI1 command register high */
+ u8 res2[0x1];
+ u8 sistr1_h; /* SI1 status register high */
+ u8 res3[0x1];
+ u16 sirsr1_h; /* SI1 RAM shadow address register high */
+ u8 sitarc1; /* SI1 RAM counter Tx TDMA */
+ u8 sitbrc1; /* SI1 RAM counter Tx TDMB */
+ u8 sitcrc1; /* SI1 RAM counter Tx TDMC */
+ u8 sitdrc1; /* SI1 RAM counter Tx TDMD */
+ u8 sirarc1; /* SI1 RAM counter Rx TDMA */
+ u8 sirbrc1; /* SI1 RAM counter Rx TDMB */
+ u8 sircrc1; /* SI1 RAM counter Rx TDMC */
+ u8 sirdrc1; /* SI1 RAM counter Rx TDMD */
+ u8 res4[0x8];
+ u16 siemr1; /* SI1 TDME mode register 16 bits */
+ u16 sifmr1; /* SI1 TDMF mode register 16 bits */
+ u16 sigmr1; /* SI1 TDMG mode register 16 bits */
+ u16 sihmr1; /* SI1 TDMH mode register 16 bits */
+ u8 siglmg1_l; /* SI1 global mode register low 8 bits */
+ u8 res5[0x1];
+ u8 sicmdr1_l; /* SI1 command register low 8 bits */
+ u8 res6[0x1];
+ u8 sistr1_l; /* SI1 status register low 8 bits */
+ u8 res7[0x1];
+ u16 sirsr1_l; /* SI1 RAM shadow address register low 16
+ bits */
+ u8 siterc1; /* SI1 RAM counter Tx TDME 8 bits */
+ u8 sitfrc1; /* SI1 RAM counter Tx TDMF 8 bits */
+ u8 sitgrc1; /* SI1 RAM counter Tx TDMG 8 bits */
+ u8 sithrc1; /* SI1 RAM counter Tx TDMH 8 bits */
+ u8 sirerc1; /* SI1 RAM counter Rx TDME 8 bits */
+ u8 sirfrc1; /* SI1 RAM counter Rx TDMF 8 bits */
+ u8 sirgrc1; /* SI1 RAM counter Rx TDMG 8 bits */
+ u8 sirhrc1; /* SI1 RAM counter Rx TDMH 8 bits */
+ u8 res8[0x8];
+ u32 siml1; /* SI1 multiframe limit register */
+ u8 siedm1; /* SI1 extended diagnostic mode register */
+ u8 res9[0xBB];
+} __attribute__ ((packed)) si1_t;
+
+/* SI Routing Tables
+*/
+typedef struct sir {
+ u8 tx[0x400];
+ u8 rx[0x400];
+ u8 res0[0x800];
+} __attribute__ ((packed)) sir_t;
+
+/* USB Controller.
+*/
+typedef struct usb_ctlr {
+ u8 usb_usmod;
+ u8 usb_usadr;
+ u8 usb_uscom;
+ u8 res1[1];
+ u16 usb_usep1;
+ u16 usb_usep2;
+ u16 usb_usep3;
+ u16 usb_usep4;
+ u8 res2[4];
+ u16 usb_usber;
+ u8 res3[2];
+ u16 usb_usbmr;
+ u8 res4[1];
+ u8 usb_usbs;
+ u16 usb_ussft;
+ u8 res5[2];
+ u16 usb_usfrn;
+ u8 res6[0x22];
+} __attribute__ ((packed)) usb_t;
+
+/* MCC
+*/
+typedef struct mcc {
+ u32 mcce; /* MCC event register */
+ u32 mccm; /* MCC mask register */
+ u32 mccf; /* MCC configuration register */
+ u32 merl; /* MCC emergency request level register */
+ u8 res0[0xF0];
+} __attribute__ ((packed)) mcc_t;
+
+/* QE UCC Slow
+*/
+typedef struct ucc_slow {
+ u32 gumr_l; /* UCCx general mode register (low) */
+ u32 gumr_h; /* UCCx general mode register (high) */
+ u16 upsmr; /* UCCx protocol-specific mode register */
+ u8 res0[0x2];
+ u16 utodr; /* UCCx transmit on demand register */
+ u16 udsr; /* UCCx data synchronization register */
+ u16 ucce; /* UCCx event register */
+ u8 res1[0x2];
+ u16 uccm; /* UCCx mask register */
+ u8 res2[0x1];
+ u8 uccs; /* UCCx status register */
+ u8 res3[0x24];
+ u16 utpt;
+ u8 guemr; /* UCC general extended mode register */
+ u8 res4[0x200 - 0x091];
+} __attribute__ ((packed)) ucc_slow_t;
+
+/* QE UCC Fast
+*/
+typedef struct ucc_fast {
+ u32 gumr; /* UCCx general mode register */
+ u32 upsmr; /* UCCx protocol-specific mode register */
+ u16 utodr; /* UCCx transmit on demand register */
+ u8 res0[0x2];
+ u16 udsr; /* UCCx data synchronization register */
+ u8 res1[0x2];
+ u32 ucce; /* UCCx event register */
+ u32 uccm; /* UCCx mask register. */
+ u8 uccs; /* UCCx status register */
+ u8 res2[0x7];
+ u32 urfb; /* UCC receive FIFO base */
+ u16 urfs; /* UCC receive FIFO size */
+ u8 res3[0x2];
+ u16 urfet; /* UCC receive FIFO emergency threshold */
+ u16 urfset; /* UCC receive FIFO special emergency
+ threshold */
+ u32 utfb; /* UCC transmit FIFO base */
+ u16 utfs; /* UCC transmit FIFO size */
+ u8 res4[0x2];
+ u16 utfet; /* UCC transmit FIFO emergency threshold */
+ u8 res5[0x2];
+ u16 utftt; /* UCC transmit FIFO transmit threshold */
+ u8 res6[0x2];
+ u16 utpt; /* UCC transmit polling timer */
+ u8 res7[0x2];
+ u32 urtry; /* UCC retry counter register */
+ u8 res8[0x4C];
+ u8 guemr; /* UCC general extended mode register */
+ u8 res9[0x100 - 0x091];
+} __attribute__ ((packed)) ucc_fast_t;
+
+/* QE UCC
+*/
+typedef struct ucc_common {
+ u8 res1[0x90];
+ u8 guemr;
+ u8 res2[0x200 - 0x091];
+} __attribute__ ((packed)) ucc_common_t;
+
+typedef struct ucc {
+ union {
+ ucc_slow_t slow;
+ ucc_fast_t fast;
+ ucc_common_t common;
+ };
+} __attribute__ ((packed)) ucc_t;
+
+/* MultiPHY UTOPIA POS Controllers (UPC)
+*/
+typedef struct upc {
+ u32 upgcr; /* UTOPIA/POS general configuration register */
+ u32 uplpa; /* UTOPIA/POS last PHY address */
+ u32 uphec; /* ATM HEC register */
+ u32 upuc; /* UTOPIA/POS UCC configuration */
+ u32 updc1; /* UTOPIA/POS device 1 configuration */
+ u32 updc2; /* UTOPIA/POS device 2 configuration */
+ u32 updc3; /* UTOPIA/POS device 3 configuration */
+ u32 updc4; /* UTOPIA/POS device 4 configuration */
+ u32 upstpa; /* UTOPIA/POS STPA threshold */
+ u8 res0[0xC];
+ u32 updrs1_h; /* UTOPIA/POS device 1 rate select */
+ u32 updrs1_l; /* UTOPIA/POS device 1 rate select */
+ u32 updrs2_h; /* UTOPIA/POS device 2 rate select */
+ u32 updrs2_l; /* UTOPIA/POS device 2 rate select */
+ u32 updrs3_h; /* UTOPIA/POS device 3 rate select */
+ u32 updrs3_l; /* UTOPIA/POS device 3 rate select */
+ u32 updrs4_h; /* UTOPIA/POS device 4 rate select */
+ u32 updrs4_l; /* UTOPIA/POS device 4 rate select */
+ u32 updrp1; /* UTOPIA/POS device 1 receive priority low */
+ u32 updrp2; /* UTOPIA/POS device 2 receive priority low */
+ u32 updrp3; /* UTOPIA/POS device 3 receive priority low */
+ u32 updrp4; /* UTOPIA/POS device 4 receive priority low */
+ u32 upde1; /* UTOPIA/POS device 1 event */
+ u32 upde2; /* UTOPIA/POS device 2 event */
+ u32 upde3; /* UTOPIA/POS device 3 event */
+ u32 upde4; /* UTOPIA/POS device 4 event */
+ u16 uprp1;
+ u16 uprp2;
+ u16 uprp3;
+ u16 uprp4;
+ u8 res1[0x8];
+ u16 uptirr1_0; /* Device 1 transmit internal rate 0 */
+ u16 uptirr1_1; /* Device 1 transmit internal rate 1 */
+ u16 uptirr1_2; /* Device 1 transmit internal rate 2 */
+ u16 uptirr1_3; /* Device 1 transmit internal rate 3 */
+ u16 uptirr2_0; /* Device 2 transmit internal rate 0 */
+ u16 uptirr2_1; /* Device 2 transmit internal rate 1 */
+ u16 uptirr2_2; /* Device 2 transmit internal rate 2 */
+ u16 uptirr2_3; /* Device 2 transmit internal rate 3 */
+ u16 uptirr3_0; /* Device 3 transmit internal rate 0 */
+ u16 uptirr3_1; /* Device 3 transmit internal rate 1 */
+ u16 uptirr3_2; /* Device 3 transmit internal rate 2 */
+ u16 uptirr3_3; /* Device 3 transmit internal rate 3 */
+ u16 uptirr4_0; /* Device 4 transmit internal rate 0 */
+ u16 uptirr4_1; /* Device 4 transmit internal rate 1 */
+ u16 uptirr4_2; /* Device 4 transmit internal rate 2 */
+ u16 uptirr4_3; /* Device 4 transmit internal rate 3 */
+ u32 uper1; /* Device 1 port enable register */
+ u32 uper2; /* Device 2 port enable register */
+ u32 uper3; /* Device 3 port enable register */
+ u32 uper4; /* Device 4 port enable register */
+ u8 res2[0x150];
+} __attribute__ ((packed)) upc_t;
+
+/* SDMA
+*/
+typedef struct sdma {
+ u32 sdsr; /* Serial DMA status register */
+ u32 sdmr; /* Serial DMA mode register */
+ u32 sdtr1; /* SDMA system bus threshold register */
+ u32 sdtr2; /* SDMA secondary bus threshold register */
+ u32 sdhy1; /* SDMA system bus hysteresis register */
+ u32 sdhy2; /* SDMA secondary bus hysteresis register */
+ u32 sdta1; /* SDMA system bus address register */
+ u32 sdta2; /* SDMA secondary bus address register */
+ u32 sdtm1; /* SDMA system bus MSNUM register */
+ u32 sdtm2; /* SDMA secondary bus MSNUM register */
+ u8 res0[0x10];
+ u32 sdaqr; /* SDMA address bus qualify register */
+ u32 sdaqmr; /* SDMA address bus qualify mask register */
+ u8 res1[0x4];
+ u32 sdebcr; /* SDMA CAM entries base register */
+ u8 res2[0x38];
+} __attribute__ ((packed)) sdma_t;
+
+/* Debug Space
+*/
+typedef struct dbg {
+ u32 bpdcr; /* Breakpoint debug command register */
+ u32 bpdsr; /* Breakpoint debug status register */
+ u32 bpdmr; /* Breakpoint debug mask register */
+ u32 bprmrr0; /* Breakpoint request mode risc register 0 */
+ u32 bprmrr1; /* Breakpoint request mode risc register 1 */
+ u8 res0[0x8];
+ u32 bprmtr0; /* Breakpoint request mode trb register 0 */
+ u32 bprmtr1; /* Breakpoint request mode trb register 1 */
+ u8 res1[0x8];
+ u32 bprmir; /* Breakpoint request mode immediate register */
+ u32 bprmsr; /* Breakpoint request mode serial register */
+ u32 bpemr; /* Breakpoint exit mode register */
+ u8 res2[0x48];
+} __attribute__ ((packed)) dbg_t;
+
+/* RISC Special Registers (Trap and Breakpoint)
+*/
+typedef struct rsp {
+ u8 fixme[0x100];
+} __attribute__ ((packed)) rsp_t;
+
+typedef struct qe_immap {
+ qe_iram_t iram; /* I-RAM */
+ qe_ic_t ic; /* Interrupt Controller */
+ cp_qe_t cp; /* Communications Processor */
+ qe_mux_t qmx; /* QE Multiplexer */
+ qe_timers_t qet; /* QE Timers */
+ spi_t spi[0x2]; /* spi */
+ mcc_t mcc; /* mcc */
+ qe_brg_t brg; /* brg */
+ usb_t usb; /* USB */
+ si1_t si1; /* SI */
+ u8 res11[0x800];
+ sir_t sir; /* SI Routing Tables */
+ ucc_t ucc1; /* ucc1 */
+ ucc_t ucc3; /* ucc3 */
+ ucc_t ucc5; /* ucc5 */
+ ucc_t ucc7; /* ucc7 */
+ u8 res12[0x600];
+ upc_t upc1; /* MultiPHY UTOPIA POS Controller 1 */
+ ucc_t ucc2; /* ucc2 */
+ ucc_t ucc4; /* ucc4 */
+ ucc_t ucc6; /* ucc6 */
+ ucc_t ucc8; /* ucc8 */
+ u8 res13[0x600];
+ upc_t upc2; /* MultiPHY UTOPIA POS Controller 2 */
+ sdma_t sdma; /* SDMA */
+ dbg_t dbg; /* Debug Space */
+ rsp_t rsp[0x2]; /* RISC Special Registers (Trap and Breakpoint)
+ */
+ u8 res14[0x300];
+ u8 res15[0x3A00];
+ u8 res16[0x8000]; /* 0x108000 - 0x110000 */
+ u8 muram[0xC000]; /* 0x110000 - 0x11C000 Multi-user RAM */
+ u8 res17[0x24000]; /* 0x11C000 - 0x140000 */
+ u8 res18[0xC0000]; /* 0x140000 - 0x200000 */
+} __attribute__ ((packed)) qe_map_t;
+
+extern qe_map_t *qe_immr;
+extern phys_addr_t get_qe_base(void);
+
+static inline unsigned long immrbar_virt_to_phys(volatile void * address)
+{
+ if ( ((uint)address >= (uint)qe_immr) &&
+ ((uint)address < ((uint)qe_immr + QE_IMMAP_SIZE)) )
+ return (unsigned long)(address - (uint)qe_immr +
+ (uint)get_qe_base());
+ return (unsigned long)virt_to_phys(address);
+}
+
+static inline void * immrbar_phys_to_virt(unsigned long address)
+{
+ if ( (address >= (uint)get_qe_base()) &&
+ (address < ((uint)get_qe_base() + QE_IMMAP_SIZE)) )
+ return (void *)(address - (uint)get_qe_base() + (uint)qe_immr);
+ return (void *)phys_to_virt(address);
+}
+
+#endif /* __IMMAP_QE_H__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/irq.h b/include/asm-powerpc/irq.h
index 7bc6d73..3fbc01e 100644
--- a/include/asm-powerpc/irq.h
+++ b/include/asm-powerpc/irq.h
@@ -225,7 +225,16 @@ #define mk_int_int_mask(IL) (1 << (7 - (
#elif defined(CONFIG_83xx)
#include <asm/mpc83xx.h>
-#define NR_IRQS (NR_IPIC_INTS)
+#ifdef CONFIG_QUICC_ENGINE
+#define QE_IRQ_OFFSET MPC83xx_QE_IRQ_OFFSET
+#define NR_QE_IC_INTS MPC83xx_NR_QE_IC_INTS
+#define IRQ_QE_HIGH MPC83xx_IRQ_QE_HIGH
+#define IRQ_QE_LOW MPC83xx_IRQ_QE_LOW
+
+#define NR_IRQS (NR_IPIC_INTS + NR_QE_IC_INTS)
+#else
+#define NR_IRQS (NR_IPIC_INTS)
+#endif /* CONFIG_QE */
#elif defined(CONFIG_85xx)
/* Now include the board configuration specific associations.
diff --git a/include/asm-powerpc/qe.h b/include/asm-powerpc/qe.h
new file mode 100644
index 0000000..0502a51
--- /dev/null
+++ b/include/asm-powerpc/qe.h
@@ -0,0 +1,498 @@
+/*
+ * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
+ *
+ * Author: Shlomi Gridish <gridish at freescale.com>
+ *
+ * Description:
+ * QUICC Engine (QE) external definitions and structure.
+ *
+ * Changelog:
+ * Jun 28, 2006 Li Yang <LeoLi at freescale.com>
+ * - Reorganized as qe_lib
+ * - Merged to powerpc arch; add device tree support
+ * - Style fixes
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifdef __KERNEL__
+#ifndef __QE_H__
+#define __QE_H__
+
+#include <asm/immap_qe.h>
+
+/* Multi User RAM addresses.
+ */
+#define QE_MURAM_DATAONLY_BASE ((uint)0x0)
+#define QE_MURAM_NOSPACE ((uint)0x7fffffff)
+#define QE_MURAM_DATAONLY_SIZE ((uint)(48 * 1024) - QE_MURAM_DATAONLY_BASE)
+
+static inline long IS_MURAM_ERR(const uint offset)
+{
+ return (uint) offset > (uint) - 1000L;
+}
+
+#define QE_NUM_OF_SNUM 28
+#define QE_NUM_OF_BRGS 16
+#define QE_NUM_OF_PORTS 1024
+
+/* Memory partitions
+*/
+#define MEM_PART_SYSTEM 0
+#define MEM_PART_SECONDARY 1
+#define MEM_PART_MURAM 2
+
+/* Export the base address of the communication processor registers
+ * and dual port ram.
+ */
+int qe_issue_cmd(uint cmd, uint device, u8 mcn_protocol, u32 cmd_input);
+void qe_setbrg(uint brg, uint rate);
+int qe_get_snum(void);
+void qe_put_snum(u8 snum);
+uint qe_muram_alloc(uint size, uint align);
+int qe_muram_free(uint offset);
+uint qe_muram_alloc_fixed(uint offset, uint size, uint align);
+void qe_muram_dump(void);
+void *qe_muram_addr(uint offset);
+/* Buffer descriptors.
+*/
+typedef struct qe_bd {
+ u16 status;
+ u16 length;
+ u32 buf;
+} __attribute__ ((packed)) qe_bd_t;
+
+#define QE_SIZEOF_BD sizeof(qe_bd_t)
+
+#define BD_STATUS_MASK 0xffff0000
+#define BD_LENGTH_MASK 0x0000ffff
+
+#define BD_BUFFER_ARG(bd) ((qe_bd_t *)bd)->buf
+#define BD_BUFFER_CLEAR(bd) out_be32(&(BD_BUFFER_ARG(bd)), 0);
+#define BD_BUFFER(bd) in_be32(&(BD_BUFFER_ARG(bd)))
+#define BD_STATUS_AND_LENGTH_SET(bd, val) out_be32((u32*)bd, val)
+#define BD_STATUS_AND_LENGTH(bd) in_be32((u32*)bd)
+#define BD_BUFFER_SET(bd, buffer) out_be32(&(BD_BUFFER_ARG(bd)), \
+ (u32)(buffer))
+/* Macro for retrieving the following BD.
+ example:
+ next = BD_GET_NEXT( currBd, bdStatus, bdBase, SIZEOF_MY_BD, T_W ) */
+#define BD_GET_NEXT( curr_bd, bd_status, bd_base, bd_len, last_bd ) \
+ ( (!((bd_status) & (last_bd))) ? ((curr_bd)+(bd_len)) : (bd_base) )
+
+/* Alignments
+*/
+#define QE_INTR_TABLE_ALIGN 16 /* ??? */
+#define QE_ALIGNMENT_OF_BD 8
+#define QE_ALIGNMENT_OF_PRAM 64
+
+/* RISC allocation
+*/
+typedef enum qe_risc_allocation {
+ QE_RISC_ALLOCATION_RISC1 = 1, /* RISC 1 */
+ QE_RISC_ALLOCATION_RISC2 = 2, /* RISC 2 */
+ QE_RISC_ALLOCATION_RISC1_AND_RISC2 = 3 /* Dynamically choose RISC 1 or
+ RISC 2 */
+} qe_risc_allocation_e;
+
+/* QE extended filtering Table Lookup Key Size
+*/
+typedef enum qe_fltr_tbl_lookup_key_size {
+ QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES
+ = 0x3f, /* LookupKey parsed by the Generate LookupKey
+ CMD is truncated to 8 bytes */
+ QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES
+ = 0x5f, /* LookupKey parsed by the Generate LookupKey
+ CMD is truncated to 16 bytes */
+} qe_fltr_tbl_lookup_key_size_e;
+
+/* QE FLTR extended filtering Largest External Table Lookup Key Size
+*/
+typedef enum qe_fltr_largest_external_tbl_lookup_key_size_ {
+ QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_NONE
+ = 0x0,/* not used */
+ QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_8_BYTES
+ = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES, /* 8 bytes */
+ QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_16_BYTES
+ = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES /* 16 bytes */
+} qe_fltr_largest_external_tbl_lookup_key_size_e;
+
+/* structure representing QE parameter RAM
+*/
+typedef struct qe_timer_tables {
+ u16 tm_base; /* QE timer table base adr */
+ u16 tm_ptr; /* QE timer table pointer */
+ u16 r_tmr; /* QE timer mode register */
+ u16 r_tmv; /* QE timer valid register */
+ u32 tm_cmd; /* QE timer cmd register */
+ u32 tm_cnt; /* QE timer internal cnt */
+} __attribute__ ((packed)) qe_timer_tables_t;
+
+#define QE_FLTR_TAD_SIZE 8
+
+/* QE extended filtering Termination Action Descriptor (TAD)
+*/
+typedef struct qe_fltr_tad {
+ u8 serialized[QE_FLTR_TAD_SIZE];
+} __attribute__ ((packed)) qe_fltr_tad_t;
+
+/* Communication Direction.
+*/
+typedef enum comm_dir {
+ COMM_DIR_NONE = 0,
+ COMM_DIR_RX = 1,
+ COMM_DIR_TX = 2,
+ COMM_DIR_RX_AND_TX = 3
+} comm_dir_e;
+
+/* Clocks and GRG's
+*/
+typedef enum qe_clock {
+ QE_CLK_NONE = 0
+ , QE_BRG1 /* Baud Rate Generator 1 */
+ , QE_BRG2 /* Baud Rate Generator 2 */
+ , QE_BRG3 /* Baud Rate Generator 3 */
+ , QE_BRG4 /* Baud Rate Generator 4 */
+ , QE_BRG5 /* Baud Rate Generator 5 */
+ , QE_BRG6 /* Baud Rate Generator 6 */
+ , QE_BRG7 /* Baud Rate Generator 7 */
+ , QE_BRG8 /* Baud Rate Generator 8 */
+ , QE_BRG9 /* Baud Rate Generator 9 */
+ , QE_BRG10 /* Baud Rate Generator 10 */
+ , QE_BRG11 /* Baud Rate Generator 11 */
+ , QE_BRG12 /* Baud Rate Generator 12 */
+ , QE_BRG13 /* Baud Rate Generator 13 */
+ , QE_BRG14 /* Baud Rate Generator 14 */
+ , QE_BRG15 /* Baud Rate Generator 15 */
+ , QE_BRG16 /* Baud Rate Generator 16 */
+ , QE_CLK1 /* Clock 1 */
+ , QE_CLK2 /* Clock 2 */
+ , QE_CLK3 /* Clock 3 */
+ , QE_CLK4 /* Clock 4 */
+ , QE_CLK5 /* Clock 5 */
+ , QE_CLK6 /* Clock 6 */
+ , QE_CLK7 /* Clock 7 */
+ , QE_CLK8 /* Clock 8 */
+ , QE_CLK9 /* Clock 9 */
+ , QE_CLK10 /* Clock 10 */
+ , QE_CLK11 /* Clock 11 */
+ , QE_CLK12 /* Clock 12 */
+ , QE_CLK13 /* Clock 13 */
+ , QE_CLK14 /* Clock 14 */
+ , QE_CLK15 /* Clock 15 */
+ , QE_CLK16 /* Clock 16 */
+ , QE_CLK17 /* Clock 17 */
+ , QE_CLK18 /* Clock 18 */
+ , QE_CLK19 /* Clock 19 */
+ , QE_CLK20 /* Clock 20 */
+ , QE_CLK21 /* Clock 21 */
+ , QE_CLK22 /* Clock 22 */
+ , QE_CLK23 /* Clock 23 */
+ , QE_CLK24 /* Clock 24 */
+ , QE_CLK_DUMMY
+} qe_clock_e;
+
+/* QE CMXUCR Registers.
+ * There are two UCCs represented in each of the four CMXUCR registers.
+ * These values are for the UCC in the LSBs
+ */
+#define QE_CMXUCR_MII_ENET_MNG 0x00007000
+#define QE_CMXUCR_MII_ENET_MNG_SHIFT 12
+#define QE_CMXUCR_GRANT 0x00008000
+#define QE_CMXUCR_TSA 0x00004000
+#define QE_CMXUCR_BKPT 0x00000100
+#define QE_CMXUCR_TX_CLK_SRC_MASK 0x0000000F
+
+/* QE CMXGCR Registers.
+*/
+#define QE_CMXGCR_MII_ENET_MNG 0x00007000
+#define QE_CMXGCR_MII_ENET_MNG_SHIFT 12
+#define QE_CMXGCR_USBCS 0x0000000f
+
+/* QE CECR Commands.
+*/
+#define QE_CR_FLG 0x00010000
+#define QE_RESET 0x80000000
+#define QE_INIT_TX_RX 0x00000000
+#define QE_INIT_RX 0x00000001
+#define QE_INIT_TX 0x00000002
+#define QE_ENTER_HUNT_MODE 0x00000003
+#define QE_STOP_TX 0x00000004
+#define QE_GRACEFUL_STOP_TX 0x00000005
+#define QE_RESTART_TX 0x00000006
+#define QE_CLOSE_RX_BD 0x00000007
+#define QE_SWITCH_COMMAND 0x00000007
+#define QE_SET_GROUP_ADDRESS 0x00000008
+#define QE_START_IDMA 0x00000009
+#define QE_MCC_STOP_RX 0x00000009
+#define QE_ATM_TRANSMIT 0x0000000a
+#define QE_HPAC_CLEAR_ALL 0x0000000b
+#define QE_GRACEFUL_STOP_RX 0x0000001a
+#define QE_RESTART_RX 0x0000001b
+#define QE_HPAC_SET_PRIORITY 0x0000010b
+#define QE_HPAC_STOP_TX 0x0000020b
+#define QE_HPAC_STOP_RX 0x0000030b
+#define QE_HPAC_GRACEFUL_STOP_TX 0x0000040b
+#define QE_HPAC_GRACEFUL_STOP_RX 0x0000050b
+#define QE_HPAC_START_TX 0x0000060b
+#define QE_HPAC_START_RX 0x0000070b
+#define QE_USB_STOP_TX 0x0000000a
+#define QE_USB_RESTART_TX 0x0000000b
+#define QE_QMC_STOP_TX 0x0000000c
+#define QE_QMC_STOP_RX 0x0000000d
+#define QE_SS7_SU_FIL_RESET 0x0000000e
+/* jonathbr added from here down for 83xx */
+#define QE_RESET_BCS 0x0000000a
+#define QE_MCC_INIT_TX_RX_16 0x00000003
+#define QE_MCC_STOP_TX 0x00000004
+#define QE_MCC_INIT_TX_1 0x00000005
+#define QE_MCC_INIT_RX_1 0x00000006
+#define QE_MCC_RESET 0x00000007
+#define QE_SET_TIMER 0x00000008
+#define QE_RANDOM_NUMBER 0x0000000c
+#define QE_ATM_MULTI_THREAD_INIT 0x00000011
+#define QE_ASSIGN_PAGE 0x00000012
+#define QE_ADD_REMOVE_HASH_ENTRY 0x00000013
+#define QE_START_FLOW_CONTROL 0x00000014
+#define QE_STOP_FLOW_CONTROL 0x00000015
+#define QE_ASSIGN_PAGE_TO_DEVICE 0x00000016
+
+#define QE_ASSIGN_RISC 0x00000010
+#define QE_CR_MCN_NORMAL_SHIFT 6
+#define QE_CR_MCN_USB_SHIFT 4
+#define QE_CR_MCN_RISC_ASSIGN_SHIFT 8
+#define QE_CR_SNUM_SHIFT 17
+
+/* QE CECR Sub Block - sub block of QE command.
+*/
+#define QE_CR_SUBBLOCK_INVALID 0x00000000
+#define QE_CR_SUBBLOCK_USB 0x03200000
+#define QE_CR_SUBBLOCK_UCCFAST1 0x02000000
+#define QE_CR_SUBBLOCK_UCCFAST2 0x02200000
+#define QE_CR_SUBBLOCK_UCCFAST3 0x02400000
+#define QE_CR_SUBBLOCK_UCCFAST4 0x02600000
+#define QE_CR_SUBBLOCK_UCCFAST5 0x02800000
+#define QE_CR_SUBBLOCK_UCCFAST6 0x02a00000
+#define QE_CR_SUBBLOCK_UCCFAST7 0x02c00000
+#define QE_CR_SUBBLOCK_UCCFAST8 0x02e00000
+#define QE_CR_SUBBLOCK_UCCSLOW1 0x00000000
+#define QE_CR_SUBBLOCK_UCCSLOW2 0x00200000
+#define QE_CR_SUBBLOCK_UCCSLOW3 0x00400000
+#define QE_CR_SUBBLOCK_UCCSLOW4 0x00600000
+#define QE_CR_SUBBLOCK_UCCSLOW5 0x00800000
+#define QE_CR_SUBBLOCK_UCCSLOW6 0x00a00000
+#define QE_CR_SUBBLOCK_UCCSLOW7 0x00c00000
+#define QE_CR_SUBBLOCK_UCCSLOW8 0x00e00000
+#define QE_CR_SUBBLOCK_MCC1 0x03800000
+#define QE_CR_SUBBLOCK_MCC2 0x03a00000
+#define QE_CR_SUBBLOCK_MCC3 0x03000000
+#define QE_CR_SUBBLOCK_IDMA1 0x02800000
+#define QE_CR_SUBBLOCK_IDMA2 0x02a00000
+#define QE_CR_SUBBLOCK_IDMA3 0x02c00000
+#define QE_CR_SUBBLOCK_IDMA4 0x02e00000
+#define QE_CR_SUBBLOCK_HPAC 0x01e00000
+#define QE_CR_SUBBLOCK_SPI1 0x01400000
+#define QE_CR_SUBBLOCK_SPI2 0x01600000
+#define QE_CR_SUBBLOCK_RAND 0x01c00000
+#define QE_CR_SUBBLOCK_TIMER 0x01e00000
+#define QE_CR_SUBBLOCK_GENERAL 0x03c00000
+
+/* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command.
+*/
+#define QE_CR_PROTOCOL_UNSPECIFIED 0x00 /* For all other protocols */
+#define QE_CR_PROTOCOL_HDLC_TRANSPARENT 0x00
+#define QE_CR_PROTOCOL_ATM_POS 0x0A
+#define QE_CR_PROTOCOL_ETHERNET 0x0C
+#define QE_CR_PROTOCOL_L2_SWITCH 0x0D
+
+/* BMR byte order
+*/
+#define QE_BMR_BYTE_ORDER_BO_PPC 0x08 /* powerpc little endian */
+#define QE_BMR_BYTE_ORDER_BO_MOT 0x10 /* motorola big endian */
+#define QE_BMR_BYTE_ORDER_BO_MAX 0x18
+
+/* BRG configuration register
+*/
+#define QE_BRGC_ENABLE 0x00010000
+#define QE_BRGC_DIVISOR_SHIFT 1
+#define QE_BRGC_DIVISOR_MAX 0xFFF
+#define QE_BRGC_DIV16 1
+/* QE Timers registers */
+#define QE_GTCFR1_PCAS 0x80
+#define QE_GTCFR1_STP2 0x20
+#define QE_GTCFR1_RST2 0x10
+#define QE_GTCFR1_GM2 0x08
+#define QE_GTCFR1_GM1 0x04
+#define QE_GTCFR1_STP1 0x02
+#define QE_GTCFR1_RST1 0x01
+
+/* SDMA registers */
+#define QE_SDSR_BER1 0x02000000
+#define QE_SDSR_BER2 0x01000000
+
+#define QE_SDMR_GLB_1_MSK 0x80000000
+#define QE_SDMR_ADR_SEL 0x20000000
+#define QE_SDMR_BER1_MSK 0x02000000
+#define QE_SDMR_BER2_MSK 0x01000000
+#define QE_SDMR_EB1_MSK 0x00800000
+#define QE_SDMR_ER1_MSK 0x00080000
+#define QE_SDMR_ER2_MSK 0x00040000
+#define QE_SDMR_CEN_MASK 0x0000E000
+#define QE_SDMR_SBER_1 0x00000200
+#define QE_SDMR_SBER_2 0x00000200
+#define QE_SDMR_EB1_PR_MASK 0x000000C0
+#define QE_SDMR_ER1_PR 0x00000008
+
+#define QE_SDMR_CEN_SHIFT 13
+#define QE_SDMR_EB1_PR_SHIFT 6
+
+#define QE_SDTM_MSNUM_SHIFT 24
+
+#define QE_SDEBCR_BA_MASK 0x01FFFFFF
+
+/* UPC
+*/
+#define UPGCR_PROTOCOL 0x80000000 /* protocol ul2 or pl2 */
+#define UPGCR_TMS 0x40000000 /* Transmit master/slave mode */
+#define UPGCR_RMS 0x20000000 /* Receive master/slave mode */
+#define UPGCR_ADDR 0x10000000 /* Master MPHY Addr multiplexing */
+#define UPGCR_DIAG 0x01000000 /* Diagnostic mode */
+
+/* UCC
+*/
+#define UCC_GUEMR_MODE_MASK_RX 0x02
+#define UCC_GUEMR_MODE_MASK_TX 0x01
+#define UCC_GUEMR_MODE_FAST_RX 0x02
+#define UCC_GUEMR_MODE_FAST_TX 0x01
+#define UCC_GUEMR_MODE_SLOW_RX 0x00
+#define UCC_GUEMR_MODE_SLOW_TX 0x00
+#define UCC_GUEMR_SET_RESERVED3 0x10 /* Bit 3 in the guemr is reserved but
+ must be set 1 */
+
+/* structure representing UCC SLOW parameter RAM
+*/
+typedef struct ucc_slow_pram {
+ u16 rbase; /* RX BD base address */
+ u16 tbase; /* TX BD base address */
+ u8 rfcr; /* Rx function code */
+ u8 tfcr; /* Tx function code */
+ u16 mrblr; /* Rx buffer length */
+ u32 rstate; /* Rx internal state */
+ u32 rptr; /* Rx internal data pointer */
+ u16 rbptr; /* rb BD Pointer */
+ u16 rcount; /* Rx internal byte count */
+ u32 rtemp; /* Rx temp */
+ u32 tstate; /* Tx internal state */
+ u32 tptr; /* Tx internal data pointer */
+ u16 tbptr; /* Tx BD pointer */
+ u16 tcount; /* Tx byte count */
+ u32 ttemp; /* Tx temp */
+ u32 rcrc; /* temp receive CRC */
+ u32 tcrc; /* temp transmit CRC */
+} __attribute__ ((packed)) ucc_slow_pram_t;
+
+/* General UCC SLOW Mode Register (GUMRH & GUMRL)
+*/
+#define UCC_SLOW_GUMR_H_CRC16 0x00004000
+#define UCC_SLOW_GUMR_H_CRC16CCITT 0x00000000
+#define UCC_SLOW_GUMR_H_CRC32CCITT 0x00008000
+#define UCC_SLOW_GUMR_H_REVD 0x00002000
+#define UCC_SLOW_GUMR_H_TRX 0x00001000
+#define UCC_SLOW_GUMR_H_TTX 0x00000800
+#define UCC_SLOW_GUMR_H_CDP 0x00000400
+#define UCC_SLOW_GUMR_H_CTSP 0x00000200
+#define UCC_SLOW_GUMR_H_CDS 0x00000100
+#define UCC_SLOW_GUMR_H_CTSS 0x00000080
+#define UCC_SLOW_GUMR_H_TFL 0x00000040
+#define UCC_SLOW_GUMR_H_RFW 0x00000020
+#define UCC_SLOW_GUMR_H_TXSY 0x00000010
+#define UCC_SLOW_GUMR_H_4SYNC 0x00000004
+#define UCC_SLOW_GUMR_H_8SYNC 0x00000008
+#define UCC_SLOW_GUMR_H_16SYNC 0x0000000c
+#define UCC_SLOW_GUMR_H_RTSM 0x00000002
+#define UCC_SLOW_GUMR_H_RSYN 0x00000001
+
+#define UCC_SLOW_GUMR_L_TCI 0x10000000
+#define UCC_SLOW_GUMR_L_RINV 0x02000000
+#define UCC_SLOW_GUMR_L_TINV 0x01000000
+#define UCC_SLOW_GUMR_L_TEND 0x00020000
+#define UCC_SLOW_GUMR_L_ENR 0x00000020
+#define UCC_SLOW_GUMR_L_ENT 0x00000010
+
+/* General UCC FAST Mode Register
+*/
+#define UCC_FAST_GUMR_TCI 0x20000000
+#define UCC_FAST_GUMR_TRX 0x10000000
+#define UCC_FAST_GUMR_TTX 0x08000000
+#define UCC_FAST_GUMR_CDP 0x04000000
+#define UCC_FAST_GUMR_CTSP 0x02000000
+#define UCC_FAST_GUMR_CDS 0x01000000
+#define UCC_FAST_GUMR_CTSS 0x00800000
+#define UCC_FAST_GUMR_TXSY 0x00020000
+#define UCC_FAST_GUMR_RSYN 0x00010000
+#define UCC_FAST_GUMR_RTSM 0x00002000
+#define UCC_FAST_GUMR_REVD 0x00000400
+#define UCC_FAST_GUMR_ENR 0x00000020
+#define UCC_FAST_GUMR_ENT 0x00000010
+
+/* Slow UCC Event Register (UCCE)
+*/
+#define UCC_SLOW_UCCE_GLR 0x1000
+#define UCC_SLOW_UCCE_GLT 0x0800
+#define UCC_SLOW_UCCE_DCC 0x0400
+#define UCC_SLOW_UCCE_FLG 0x0200
+#define UCC_SLOW_UCCE_AB 0x0200
+#define UCC_SLOW_UCCE_IDLE 0x0100
+#define UCC_SLOW_UCCE_GRA 0x0080
+#define UCC_SLOW_UCCE_TXE 0x0010
+#define UCC_SLOW_UCCE_RXF 0x0008
+#define UCC_SLOW_UCCE_CCR 0x0008
+#define UCC_SLOW_UCCE_RCH 0x0008
+#define UCC_SLOW_UCCE_BSY 0x0004
+#define UCC_SLOW_UCCE_TXB 0x0002
+#define UCC_SLOW_UCCE_TX 0x0002
+#define UCC_SLOW_UCCE_RX 0x0001
+#define UCC_SLOW_UCCE_GOV 0x0001
+#define UCC_SLOW_UCCE_GUN 0x0002
+#define UCC_SLOW_UCCE_GINT 0x0004
+#define UCC_SLOW_UCCE_IQOV 0x0008
+
+#define UCC_SLOW_UCCE_HDLC_SET (UCC_SLOW_UCCE_TXE|UCC_SLOW_UCCE_BSY| \
+ UCC_SLOW_UCCE_GRA|UCC_SLOW_UCCE_TXB|UCC_SLOW_UCCE_RXF| \
+ UCC_SLOW_UCCE_DCC|UCC_SLOW_UCCE_GLT|UCC_SLOW_UCCE_GLR)
+#define UCC_SLOW_UCCE_ENET_SET (UCC_SLOW_UCCE_TXE|UCC_SLOW_UCCE_BSY| \
+ UCC_SLOW_UCCE_GRA|UCC_SLOW_UCCE_TXB|UCC_SLOW_UCCE_RXF)
+#define UCC_SLOW_UCCE_TRANS_SET (UCC_SLOW_UCCE_TXE|UCC_SLOW_UCCE_BSY| \
+ UCC_SLOW_UCCE_GRA|UCC_SLOW_UCCE_TX |UCC_SLOW_UCCE_RX | \
+ UCC_SLOW_UCCE_DCC|UCC_SLOW_UCCE_GLT|UCC_SLOW_UCCE_GLR)
+#define UCC_SLOW_UCCE_UART_SET (UCC_SLOW_UCCE_BSY|UCC_SLOW_UCCE_GRA| \
+ UCC_SLOW_UCCE_TXB|UCC_SLOW_UCCE_TX |UCC_SLOW_UCCE_RX | \
+ UCC_SLOW_UCCE_GLT|UCC_SLOW_UCCE_GLR)
+#define UCC_SLOW_UCCE_QMC_SET (UCC_SLOW_UCCE_IQOV|UCC_SLOW_UCCE_GINT| \
+ UCC_SLOW_UCCE_GUN|UCC_SLOW_UCCE_GOV)
+
+#define UCC_SLOW_UCCE_OTHER (UCC_SLOW_UCCE_TXE|UCC_SLOW_UCCE_BSY| \
+ UCC_SLOW_UCCE_GRA|UCC_SLOW_UCCE_DCC|UCC_SLOW_UCCE_GLT| \
+ UCC_SLOW_UCCE_GLR)
+
+#define UCC_SLOW_INTR_TX UCC_SLOW_UCCE_TXB
+#define UCC_SLOW_INTR_RX (UCC_SLOW_UCCE_RXF | UCC_SLOW_UCCE_RX)
+#define UCC_SLOW_INTR (UCC_SLOW_INTR_TX | UCC_SLOW_INTR_RX)
+
+/* Transmit On Demand (UTORD)
+*/
+#define UCC_SLOW_TOD 0x8000
+#define UCC_FAST_TOD 0x8000
+
+/* Function code masks.
+*/
+#define FC_GBL 0x20
+#define FC_DTB_LCL 0x02
+#define UCC_FAST_FUNCTION_CODE_GBL 0x20
+#define UCC_FAST_FUNCTION_CODE_DTB_LCL 0x02
+#define UCC_FAST_FUNCTION_CODE_BDB_LCL 0x01
+
+#endif /* __QE_H__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/qe_ic.h b/include/asm-powerpc/qe_ic.h
new file mode 100644
index 0000000..81bbf2a
--- /dev/null
+++ b/include/asm-powerpc/qe_ic.h
@@ -0,0 +1,131 @@
+/*
+ * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
+ *
+ * Author: Shlomi Gridish <gridish at freescale.com>
+ *
+ * Description:
+ * QE IC external definitions and structure.
+ *
+ * Changelog:
+ * Jun 28, 2006 Li Yang <LeoLi at freescale.com>
+ * - Reorganized as qe_lib
+ * - Merged to powerpc arch; add device tree support
+ * - Style fixes
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifdef __KERNEL__
+#ifndef __ASM_QE_IC_H__
+#define __ASM_QE_IC_H__
+
+#include <linux/irq.h>
+
+#define _IO_BASE isa_io_base
+#define _ISA_MEM_BASE isa_mem_base
+#ifdef CONFIG_PCI
+#define PCI_DRAM_OFFSET pci_dram_offset
+#else
+#define PCI_DRAM_OFFSET 0
+#endif
+
+#define NUM_OF_QE_IC_GROUPS 6
+
+/* Flags when we init the QE IC */
+#define QE_IC_SPREADMODE_GRP_W 0x00000001
+#define QE_IC_SPREADMODE_GRP_X 0x00000002
+#define QE_IC_SPREADMODE_GRP_Y 0x00000004
+#define QE_IC_SPREADMODE_GRP_Z 0x00000008
+#define QE_IC_SPREADMODE_GRP_RISCA 0x00000010
+#define QE_IC_SPREADMODE_GRP_RISCB 0x00000020
+
+#define QE_IC_LOW_SIGNAL 0x00000100
+#define QE_IC_HIGH_SIGNAL 0x00000200
+
+#define QE_IC_GRP_W_PRI0_DEST_SIGNAL_HIGH 0x00001000
+#define QE_IC_GRP_W_PRI1_DEST_SIGNAL_HIGH 0x00002000
+#define QE_IC_GRP_X_PRI0_DEST_SIGNAL_HIGH 0x00004000
+#define QE_IC_GRP_X_PRI1_DEST_SIGNAL_HIGH 0x00008000
+#define QE_IC_GRP_Y_PRI0_DEST_SIGNAL_HIGH 0x00010000
+#define QE_IC_GRP_Y_PRI1_DEST_SIGNAL_HIGH 0x00020000
+#define QE_IC_GRP_Z_PRI0_DEST_SIGNAL_HIGH 0x00040000
+#define QE_IC_GRP_Z_PRI1_DEST_SIGNAL_HIGH 0x00080000
+#define QE_IC_GRP_RISCA_PRI0_DEST_SIGNAL_HIGH 0x00100000
+#define QE_IC_GRP_RISCA_PRI1_DEST_SIGNAL_HIGH 0x00200000
+#define QE_IC_GRP_RISCB_PRI0_DEST_SIGNAL_HIGH 0x00400000
+#define QE_IC_GRP_RISCB_PRI1_DEST_SIGNAL_HIGH 0x00800000
+#define QE_IC_GRP_W_DEST_SIGNAL_SHIFT (12)
+
+/*
+ * QE interrupt sources groups
+ */
+enum qe_ic_grp_id {
+ QE_IC_GRP_W = 0, /* QE interrupt controller group W */
+ QE_IC_GRP_X, /* QE interrupt controller group X */
+ QE_IC_GRP_Y, /* QE interrupt controller group Y */
+ QE_IC_GRP_Z, /* QE interrupt controller group Z */
+ QE_IC_GRP_RISCA, /* QE interrupt controller RISC group A */
+ QE_IC_GRP_RISCB /* QE interrupt controller RISC group B */
+};
+
+/*
+ * QE interrupt controller internal structure
+ */
+struct qe_ic_info {
+ u32 mask; /* locaion of this source at the QIMR register. */
+ int qimr; /* TRUE is this source is mappd to QIMR, */
+ /* otherwise - QRIMR (risc). */
+ u8 pri_code; /* for grouped interrupts sources - the interrupt */
+ /* code as appears at the group priority register. */
+};
+
+/*********************************************/
+/****** QE IC API routines *****/
+/*********************************************/
+int qe_ic_init(phys_addr_t phys_addr,
+ unsigned int flags, unsigned int irq_offset);
+void qe_ic_free(void);
+void qe_ic_enable_irq(unsigned int qeIntrSrc);
+void qe_ic_disable_irq(unsigned int qeIntrSrc);
+void qe_ic_disable_irq_and_ack(unsigned int irq);
+void qe_ic_end_irq(unsigned int irq);
+
+/* qe_ic_modify_highest_priority
+ * Optional, used to change default. This routine defines a single interrupt
+ * source to be highest priority. It may be called at any stage, thus enabling
+ * dynamic change of the highest priority interrupt.
+ * In default, Highest priority is XCC1 highest priority interrupt source.
+ *
+ * irq (In) - Interrupt source Id.
+ */
+void qe_ic_modify_highest_priority(unsigned int irq);
+
+/* qe_ic_modify_priority
+ * Optional, used to change default. May be called at run time to manipulate
+ * priorities. This routine is called to reorganize a specific group.
+ *
+ * qeIcGroupId (In) - One of:
+ * e_QE_IC_GRP_W
+ * e_QE_IC_GRP_X
+ * e_QE_IC_GRP_Y
+ * e_QE_IC_GRP_Z
+ * e_QE_IC_GRP_RISCA
+ * e_QE_IC_GRP_RISCB
+ * pri0, pr1,..., pri7 (In) - A list of interrupt sources (of type
+ * unsigned int) in order of priority. The
+ * list must include all and only sources
+ * of the specified group.
+ */
+void qe_ic_modify_priority(enum qe_ic_grp_id qeIcGroupId,
+ unsigned int pri0,
+ unsigned int pri1,
+ unsigned int pri2,
+ unsigned int pri3,
+ unsigned int pri4,
+ unsigned int pri5,
+ unsigned int pri6, unsigned int pri7);
+
+#endif /* __ASM_QE_IC_H__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/ucc.h b/include/asm-powerpc/ucc.h
new file mode 100644
index 0000000..084c786
--- /dev/null
+++ b/include/asm-powerpc/ucc.h
@@ -0,0 +1,89 @@
+/*
+ * aopyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
+ *
+ * Author: Shlomi Gridish <gridish at freescale.com>
+ *
+ * Description:
+ * Internal header file for UCC unit routines.
+ *
+ * Changelog:
+ * Jun 28, 2006 Li Yang <LeoLi at freescale.com>
+ * - Reorganized as qe_lib
+ * - Merged to powerpc arch; add device tree support
+ * - Style fixes
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __UCC_H__
+#define __UCC_H__
+
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+
+#define STATISTICS
+
+#define UCC_MAX_NUM 8
+
+/* Slow or fast type for UCCs.
+*/
+typedef enum ucc_speed_type {
+ UCC_SPEED_TYPE_FAST, UCC_SPEED_TYPE_SLOW
+} ucc_speed_type_e;
+
+/* Initial UCCs Parameter RAM address relative to: MEM_MAP_BASE (IMMR).
+*/
+typedef enum ucc_pram_initial_offset {
+ UCC_PRAM_OFFSET_UCC1 = 0x8400,
+ UCC_PRAM_OFFSET_UCC2 = 0x8500,
+ UCC_PRAM_OFFSET_UCC3 = 0x8600,
+ UCC_PRAM_OFFSET_UCC4 = 0x9000,
+ UCC_PRAM_OFFSET_UCC5 = 0x8000,
+ UCC_PRAM_OFFSET_UCC6 = 0x8100,
+ UCC_PRAM_OFFSET_UCC7 = 0x8200,
+ UCC_PRAM_OFFSET_UCC8 = 0x8300
+} ucc_pram_initial_offset_e;
+
+/* ucc_set_type
+ * Sets UCC to slow or fast mode.
+ *
+ * ucc_num - (In) number of UCC (0-7).
+ * regs - (In) pointer to registers base for the UCC.
+ * speed - (In) slow or fast mode for UCC.
+ */
+int ucc_set_type(int ucc_num, struct ucc_common *regs,
+ enum ucc_speed_type speed);
+
+/* ucc_init_guemr
+ * Init the Guemr register.
+ *
+ * regs - (In) pointer to registers base for the UCC.
+ */
+int ucc_init_guemr(struct ucc_common *regs);
+
+int ucc_set_qe_mux_mii_mng(int ucc_num);
+
+int ucc_set_qe_mux_rxtx(int ucc_num, qe_clock_e clock, comm_dir_e mode);
+
+int ucc_mux_set_grant_tsa_bkpt(int ucc_num, int set, u32 mask);
+
+/* QE MUX clock routing for UCC
+*/
+static inline int ucc_set_qe_mux_grant(int ucc_num, int set)
+{
+ return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_GRANT);
+}
+
+static inline int ucc_set_qe_mux_tsa(int ucc_num, int set)
+{
+ return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_TSA);
+}
+
+static inline int ucc_set_qe_mux_bkpt(int ucc_num, int set)
+{
+ return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_BKPT);
+}
+
+#endif /* __UCC_H__ */
diff --git a/include/asm-powerpc/ucc_fast.h b/include/asm-powerpc/ucc_fast.h
new file mode 100644
index 0000000..a88b97c
--- /dev/null
+++ b/include/asm-powerpc/ucc_fast.h
@@ -0,0 +1,259 @@
+/*
+ * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
+ *
+ * Author: Shlomi Gridish <gridish at freescale.com>
+ *
+ * Description:
+ * Internal header file for UCC FAST unit routines.
+ *
+ * Changelog:
+ * Jun 28, 2006 Li Yang <LeoLi at freescale.com>
+ * - Reorganized as qe_lib
+ * - Merged to powerpc arch; add device tree support
+ * - Style fixes
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __UCC_FAST_H__
+#define __UCC_FAST_H__
+
+#include <linux/kernel.h>
+
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+
+#include "ucc.h"
+
+/* Receive BD's status.
+*/
+#define R_E 0x80000000 /* buffer empty */
+#define R_W 0x20000000 /* wrap bit */
+#define R_I 0x10000000 /* interrupt on reception */
+#define R_L 0x08000000 /* last */
+#define R_F 0x04000000 /* first */
+
+/* transmit BD's status.
+*/
+#define T_R 0x80000000 /* ready bit */
+#define T_W 0x20000000 /* wrap bit */
+#define T_I 0x10000000 /* interrupt on completion */
+#define T_L 0x08000000 /* last */
+
+/* Rx Data buffer must be 4 bytes aligned in most cases.*/
+#define UCC_FAST_RX_ALIGN 4
+#define UCC_FAST_MRBLR_ALIGNMENT 4
+#define UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT 8
+
+/* Sizes
+*/
+#define UCC_FAST_URFS_MIN_VAL 0x88
+#define UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR 8
+
+/* ucc_fast_channel_protocol_mode - UCC FAST mode.
+*/
+typedef enum ucc_fast_channel_protocol_mode {
+ UCC_FAST_PROTOCOL_MODE_HDLC = 0x00000000,
+ UCC_FAST_PROTOCOL_MODE_RESERVED01 = 0x00000001,
+ UCC_FAST_PROTOCOL_MODE_RESERVED_QMC = 0x00000002,
+ UCC_FAST_PROTOCOL_MODE_RESERVED02 = 0x00000003,
+ UCC_FAST_PROTOCOL_MODE_RESERVED_UART = 0x00000004,
+ UCC_FAST_PROTOCOL_MODE_RESERVED03 = 0x00000005,
+ UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_1 = 0x00000006,
+ UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_2 = 0x00000007,
+ UCC_FAST_PROTOCOL_MODE_RESERVED_BISYNC = 0x00000008,
+ UCC_FAST_PROTOCOL_MODE_RESERVED04 = 0x00000009,
+ UCC_FAST_PROTOCOL_MODE_ATM = 0x0000000A,
+ UCC_FAST_PROTOCOL_MODE_RESERVED05 = 0x0000000B,
+ UCC_FAST_PROTOCOL_MODE_ETHERNET = 0x0000000C,
+ UCC_FAST_PROTOCOL_MODE_RESERVED06 = 0x0000000D,
+ UCC_FAST_PROTOCOL_MODE_POS = 0x0000000E,
+ UCC_FAST_PROTOCOL_MODE_RESERVED07 = 0x0000000F
+} ucc_fast_channel_protocol_mode_e;
+
+/* ucc_fast_transparent_txrx - UCC Fast Transparent TX & RX
+*/
+typedef enum ucc_fast_transparent_txrx {
+ UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_NORMAL = 0x00000000,
+ UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_TRANSPARENT = 0x18000000
+} ucc_fast_transparent_txrx_e;
+
+/* UCC fast diagnostic mode
+*/
+typedef enum ucc_fast_diag_mode {
+ UCC_FAST_DIAGNOSTIC_NORMAL = 0x0,
+ UCC_FAST_DIAGNOSTIC_LOCAL_LOOP_BACK = 0x40000000,
+ UCC_FAST_DIAGNOSTIC_AUTO_ECHO = 0x80000000,
+ UCC_FAST_DIAGNOSTIC_LOOP_BACK_AND_ECHO = 0xC0000000
+} ucc_fast_diag_mode_e;
+
+/* UCC fast Sync length (transparent mode only)
+*/
+typedef enum ucc_fast_sync_len {
+ UCC_FAST_SYNC_LEN_NOT_USED = 0x0,
+ UCC_FAST_SYNC_LEN_AUTOMATIC = 0x00004000,
+ UCC_FAST_SYNC_LEN_8_BIT = 0x00008000,
+ UCC_FAST_SYNC_LEN_16_BIT = 0x0000C000
+} ucc_fast_sync_len_e;
+
+/* UCC fast RTS mode
+*/
+typedef enum ucc_fast_ready_to_send {
+ UCC_FAST_SEND_IDLES_BETWEEN_FRAMES = 0x00000000,
+ UCC_FAST_SEND_FLAGS_BETWEEN_FRAMES = 0x00002000
+} ucc_fast_ready_to_send_e;
+
+/* UCC fast receiver decoding mode
+*/
+typedef enum ucc_fast_rx_decoding_method {
+ UCC_FAST_RX_ENCODING_NRZ = 0x00000000,
+ UCC_FAST_RX_ENCODING_NRZI = 0x00000800,
+ UCC_FAST_RX_ENCODING_RESERVED0 = 0x00001000,
+ UCC_FAST_RX_ENCODING_RESERVED1 = 0x00001800
+} ucc_fast_rx_decoding_method_e;
+
+/* UCC fast transmitter encoding mode
+*/
+typedef enum ucc_fast_tx_encoding_method {
+ UCC_FAST_TX_ENCODING_NRZ = 0x00000000,
+ UCC_FAST_TX_ENCODING_NRZI = 0x00000100,
+ UCC_FAST_TX_ENCODING_RESERVED0 = 0x00000200,
+ UCC_FAST_TX_ENCODING_RESERVED1 = 0x00000300
+} ucc_fast_tx_encoding_method_e;
+
+/* UCC fast CRC length
+*/
+typedef enum ucc_fast_transparent_tcrc {
+ UCC_FAST_16_BIT_CRC = 0x00000000,
+ UCC_FAST_CRC_RESERVED0 = 0x00000040,
+ UCC_FAST_32_BIT_CRC = 0x00000080,
+ UCC_FAST_CRC_RESERVED1 = 0x000000C0
+} ucc_fast_transparent_tcrc_e;
+
+/* Fast UCC initialization structure.
+*/
+typedef struct ucc_fast_info {
+ int ucc_num;
+ qe_clock_e rx_clock;
+ qe_clock_e tx_clock;
+ u32 regs;
+ int irq;
+ u32 uccm_mask;
+ int bd_mem_part;
+ int brkpt_support;
+ int grant_support;
+ int tsa;
+ int cdp;
+ int cds;
+ int ctsp;
+ int ctss;
+ int tci;
+ int txsy;
+ int rtsm;
+ int revd;
+ int rsyn;
+ u16 max_rx_buf_length;
+ u16 urfs;
+ u16 urfet;
+ u16 urfset;
+ u16 utfs;
+ u16 utfet;
+ u16 utftt;
+ u16 ufpt;
+ ucc_fast_channel_protocol_mode_e mode;
+ ucc_fast_transparent_txrx_e ttx_trx;
+ ucc_fast_tx_encoding_method_e tenc;
+ ucc_fast_rx_decoding_method_e renc;
+ ucc_fast_transparent_tcrc_e tcrc;
+ ucc_fast_sync_len_e synl;
+} ucc_fast_info_t;
+
+typedef struct ucc_fast_private {
+ ucc_fast_info_t *uf_info;
+ ucc_fast_t *uf_regs; /* a pointer to memory map of UCC regs. */
+ u32 *p_ucce; /* a pointer to the event register in memory. */
+ u32 *p_uccm; /* a pointer to the mask register in memory. */
+ int enabled_tx; /* Whether channel is enabled for Tx (ENT) */
+ int enabled_rx; /* Whether channel is enabled for Rx (ENR) */
+ int stopped_tx; /* Whether channel has been stopped for Tx
+ (STOP_TX, etc.) */
+ int stopped_rx; /* Whether channel has been stopped for Rx */
+ u32 ucc_fast_tx_virtual_fifo_base_offset;/* pointer to base of Tx
+ virtual fifo */
+ u32 ucc_fast_rx_virtual_fifo_base_offset;/* pointer to base of Rx
+ virtual fifo */
+#ifdef STATISTICS
+ u32 tx_frames; /* Transmitted frames counter. */
+ u32 rx_frames; /* Received frames counter (only frames
+ passed to application). */
+ u32 tx_discarded; /* Discarded tx frames counter (frames that
+ were discarded by the driver due to errors).
+ */
+ u32 rx_discarded; /* Discarded rx frames counter (frames that
+ were discarded by the driver due to errors).
+ */
+#endif /* STATISTICS */
+ u16 mrblr; /* maximum receive buffer length */
+} ucc_fast_private_t;
+
+/* ucc_fast_init
+ * Initializes Fast UCC according to user provided parameters.
+ *
+ * uf_info - (In) pointer to the fast UCC info structure.
+ * uccf_ret - (Out) pointer to the fast UCC structure.
+ */
+int ucc_fast_init(ucc_fast_info_t * uf_info, ucc_fast_private_t ** uccf_ret);
+
+/* ucc_fast_free
+ * Frees all resources for fast UCC.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ */
+void ucc_fast_free(ucc_fast_private_t * uccf);
+
+/* ucc_fast_enable
+ * Enables a fast UCC port.
+ * This routine enables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_fast_enable(ucc_fast_private_t * uccf, comm_dir_e mode);
+
+/* ucc_fast_disable
+ * Disables a fast UCC port.
+ * This routine disables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_fast_disable(ucc_fast_private_t * uccf, comm_dir_e mode);
+
+/* ucc_fast_irq
+ * Handles interrupts on fast UCC.
+ * Called from the general interrupt routine to handle interrupts on fast UCC.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ */
+void ucc_fast_irq(ucc_fast_private_t * uccf);
+
+/* ucc_fast_transmit_on_demand
+ * Immediately forces a poll of the transmitter for data to be sent.
+ * Typically, the hardware performs a periodic poll for data that the
+ * transmit routine has set up to be transmitted. In cases where
+ * this polling cycle is not soon enough, this optional routine can
+ * be invoked to force a poll right away, instead. Proper use for
+ * each transmission for which this functionality is desired is to
+ * call the transmit routine and then this routine right after.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ */
+void ucc_fast_transmit_on_demand(ucc_fast_private_t * uccf);
+
+u32 ucc_fast_get_qe_cr_subblock(int uccf_num);
+
+void ucc_fast_dump_regs(ucc_fast_private_t * uccf);
+
+#endif /* __UCC_FAST_H__ */
diff --git a/include/asm-powerpc/ucc_slow.h b/include/asm-powerpc/ucc_slow.h
new file mode 100644
index 0000000..531b87d
--- /dev/null
+++ b/include/asm-powerpc/ucc_slow.h
@@ -0,0 +1,309 @@
+/*
+ * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
+ *
+ * Author: Shlomi Gridish <gridish at freescale.com>
+ *
+ * Description:
+ * Internal header file for UCC SLOW unit routines.
+ *
+ * Changelog:
+ * Jun 28, 2006 Li Yang <LeoLi at freescale.com>
+ * - Reorganized as qe_lib
+ * - Merged to powerpc arch; add device tree support
+ * - Style fixes
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __UCC_SLOW_H__
+#define __UCC_SLOW_H__
+
+#include <linux/kernel.h>
+
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+
+#include "ucc.h"
+
+#define UCC_SLOW_SIZE_OF_BD QE_SIZEOF_BD
+
+/* transmit BD's status.
+*/
+#define T_R 0x80000000 /* ready bit */
+#define T_PAD 0x40000000 /* add pads to short frames */
+#define T_W 0x20000000 /* wrap bit */
+#define T_I 0x10000000 /* interrupt on completion */
+#define T_L 0x08000000 /* last */
+
+#define T_A 0x04000000 /* Address - the data transmitted as address
+ chars */
+#define T_TC 0x04000000 /* transmit CRC */
+#define T_CM 0x02000000 /* continuous mode */
+#define T_DEF 0x02000000 /* collision on previous attempt to transmit. */
+#define T_P 0x01000000 /* Preamble - send Preamble sequence before
+ data */
+#define T_HB 0x01000000 /* heartbeat. */
+#define T_NS 0x00800000 /* No Stop */
+#define T_LC 0x00800000 /* late collision. */
+#define T_RL 0x00400000 /* retransmission limit. */
+#define T_UN 0x00020000 /* underrun */
+#define T_CT 0x00010000 /* CTS lost */
+#define T_CSL 0x00010000 /* carrier sense lost. */
+#define T_RC 0x003c0000 /* retry count. */
+
+/* Receive BD's status.
+*/
+#define R_E 0x80000000 /* buffer empty */
+#define R_W 0x20000000 /* wrap bit */
+#define R_I 0x10000000 /* interrupt on reception */
+#define R_L 0x08000000 /* last */
+#define R_C 0x08000000 /* the last byte in this buffer is a cntl
+ char */
+#define R_F 0x04000000 /* first */
+#define R_A 0x04000000 /* the first byte in this buffer is address
+ byte */
+#define R_CM 0x02000000 /* continuous mode */
+#define R_ID 0x01000000 /* buffer close on reception of idles */
+#define R_M 0x01000000 /* Frame received because of promiscuous
+ mode. */
+#define R_AM 0x00800000 /* Address match */
+#define R_DE 0x00800000 /* Address match */
+#define R_LG 0x00200000 /* Break received */
+#define R_BR 0x00200000 /* Frame length violation */
+#define R_NO 0x00100000 /* Rx Non Octet Aligned Packet */
+#define R_FR 0x00100000 /* Framing Error (no stop bit) character
+ received */
+#define R_PR 0x00080000 /* Parity Error character received */
+#define R_AB 0x00080000 /* Frame Aborted */
+#define R_SH 0x00080000 /* frame is too short. */
+#define R_CR 0x00040000 /* CRC Error */
+#define R_OV 0x00020000 /* Overrun */
+#define R_CD 0x00010000 /* CD lost */
+#define R_CL 0x00010000 /* this frame is closed because of a
+ collision */
+
+/* Rx Data buffer must be 4 bytes aligned in most cases.*/
+#define UCC_SLOW_RX_ALIGN 4
+#define UCC_SLOW_MRBLR_ALIGNMENT 4
+#define UCC_SLOW_PRAM_SIZE 0x100
+#define ALIGNMENT_OF_UCC_SLOW_PRAM 64
+
+/* UCC Slow Channel Protocol Mode
+*/
+typedef enum ucc_slow_channel_protocol_mode {
+ UCC_SLOW_CHANNEL_PROTOCOL_MODE_QMC = 0x00000002, /* QMC */
+ UCC_SLOW_CHANNEL_PROTOCOL_MODE_UART = 0x00000004, /* UART */
+ UCC_SLOW_CHANNEL_PROTOCOL_MODE_BISYNC = 0x00000008 /* BISYNC */
+} ucc_slow_channel_protocol_mode_e;
+
+/* UCC Slow Transparent Transmit CRC (TCRC)
+*/
+typedef enum ucc_slow_transparent_tcrc {
+ UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC16 = 0x00000000, /* 16-bit
+ CCITT CRC
+ (HDLC).
+ (X16 + X12
+ + X5 + 1) */
+ UCC_SLOW_TRANSPARENT_TCRC_CRC16 = 0x00004000, /* CRC16 (BISYNC).
+ (X16 + X15 + X2 +
+ 1) */
+ UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC32 = 0x00008000 /* 32-bit
+ CCITT CRC
+ (Ethernet
+ and HDLC).
+ */
+} ucc_slow_transparent_tcrc_e;
+
+/* UCC Slow oversampling rate for transmitter (TDCR)
+*/
+typedef enum ucc_slow_tx_oversampling_rate {
+ UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_1 = 0x00000000, /* 1x clock
+ mode */
+ UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_8 = 0x00010000, /* 8x clock
+ mode */
+ UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_16 = 0x00020000, /* 16x clock
+ mode */
+ UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_32 = 0x00030000 /* 32x clock
+ mode */
+} ucc_slow_tx_oversampling_rate_e;
+
+/* UCC Slow Oversampling rate for receiver (RDCR)
+*/
+typedef enum ucc_slow_rx_oversampling_rate {
+ UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_1 = 0x00000000, /* 1x clock
+ mode */
+ UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_8 = 0x00004000, /* 8x clock
+ mode */
+ UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_16 = 0x00008000, /* 16x clock
+ mode */
+ UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_32 = 0x0000c000 /* 32x clock
+ mode */
+} ucc_slow_rx_oversampling_rate_e;
+
+/* UCC Slow Transmitter encoding method (TENC)
+*/
+typedef enum ucc_slow_tx_encoding_method {
+ UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZ = 0x00000000,
+ UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZI = 0x00000100
+} ucc_slow_tx_encoding_method_e;
+
+/* UCC Slow Receiver decoding method (RENC)
+*/
+typedef enum ucc_slow_rx_decoding_method {
+ UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZ = 0x00000000,
+ UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZI = 0x00000800
+} ucc_slow_rx_decoding_method_e;
+
+/* UCC Slow Diagnostic mode (DIAG)
+*/
+typedef enum ucc_slow_diag_mode {
+ UCC_SLOW_DIAG_MODE_NORMAL = 0x00000000,
+ UCC_SLOW_DIAG_MODE_LOOPBACK = 0x00000040,
+ UCC_SLOW_DIAG_MODE_ECHO = 0x00000080,
+ UCC_SLOW_DIAG_MODE_LOOPBACK_ECHO = 0x000000c0
+} ucc_slow_diag_mode_e;
+
+typedef struct ucc_slow_info {
+ int ucc_num;
+ qe_clock_e rx_clock;
+ qe_clock_e tx_clock;
+ ucc_slow_t *us_regs;
+ int irq;
+ u16 uccm_mask;
+ int data_mem_part;
+ int init_tx;
+ int init_rx;
+ u32 tx_bd_ring_len;
+ u32 rx_bd_ring_len;
+ int rx_interrupts;
+ int brkpt_support;
+ int grant_support;
+ int tsa;
+ int cdp;
+ int cds;
+ int ctsp;
+ int ctss;
+ int rinv;
+ int tinv;
+ int rtsm;
+ int rfw;
+ int tci;
+ int tend;
+ int tfl;
+ int txsy;
+ u16 max_rx_buf_length;
+ ucc_slow_transparent_tcrc_e tcrc;
+ ucc_slow_channel_protocol_mode_e mode;
+ ucc_slow_diag_mode_e diag;
+ ucc_slow_tx_oversampling_rate_e tdcr;
+ ucc_slow_rx_oversampling_rate_e rdcr;
+ ucc_slow_tx_encoding_method_e tenc;
+ ucc_slow_rx_decoding_method_e renc;
+} ucc_slow_info_t;
+
+typedef struct ucc_slow_private {
+ ucc_slow_info_t *us_info;
+ ucc_slow_t *us_regs; /* a pointer to memory map of UCC regs. */
+ ucc_slow_pram_t *us_pram; /* a pointer to the parameter RAM. */
+ uint us_pram_offset;
+ int enabled_tx; /* Whether channel is enabled for Tx (ENT) */
+ int enabled_rx; /* Whether channel is enabled for Rx (ENR) */
+ int stopped_tx; /* Whether channel has been stopped for Tx
+ (STOP_TX, etc.) */
+ int stopped_rx; /* Whether channel has been stopped for Rx */
+ struct list_head confQ; /* frames passed to chip waiting for tx */
+ u32 first_tx_bd_mask; /* mask is used in Tx routine to save status
+ and length for first BD in a frame. */
+ uint tx_base_offset; /* first BD in Tx BD table offset (In MURAM) */
+ uint rx_base_offset; /* first BD in Rx BD table offset (In MURAM) */
+ u8 *confBd; /* next BD for confirm after Tx */
+ u8 *tx_bd; /* next BD for new Tx request */
+ u8 *rx_bd; /* next BD to collect after Rx */
+ void *p_rx_frame; /* accumulating receive frame */
+ u16 *p_ucce; /* a pointer to the event register in memory.
+ */
+ u16 *p_uccm; /* a pointer to the mask register in memory.
+ */
+ u16 saved_uccm; /* a saved mask for the RX Interrupt bits. */
+#ifdef STATISTICS
+ u32 tx_frames; /* Transmitted frames counters. */
+ u32 rx_frames; /* Received frames counters (only frames
+ passed to application). */
+ u32 rx_discarded; /* Discarded frames counters (frames that
+ were discarded by the driver due to
+ errors). */
+#endif /* STATISTICS */
+} ucc_slow_private_t;
+
+/* ucc_slow_init
+ * Initializes Slow UCC according to provided parameters.
+ *
+ * us_info - (In) pointer to the slow UCC info structure.
+ * uccs_ret - (Out) pointer to the slow UCC structure.
+ */
+int ucc_slow_init(ucc_slow_info_t * us_info, ucc_slow_private_t ** uccs_ret);
+
+/* ucc_slow_free
+ * Frees all resources for slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_free(ucc_slow_private_t * uccs);
+
+/* ucc_slow_enable
+ * Enables a fast UCC port.
+ * This routine enables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_slow_enable(ucc_slow_private_t * uccs, comm_dir_e mode);
+
+/* ucc_slow_disable
+ * Disables a fast UCC port.
+ * This routine disables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_slow_disable(ucc_slow_private_t * uccs, comm_dir_e mode);
+
+/* ucc_slow_poll_transmitter_now
+ * Immediately forces a poll of the transmitter for data to be sent.
+ * Typically, the hardware performs a periodic poll for data that the
+ * transmit routine has set up to be transmitted. In cases where
+ * this polling cycle is not soon enough, this optional routine can
+ * be invoked to force a poll right away, instead. Proper use for
+ * each transmission for which this functionality is desired is to
+ * call the transmit routine and then this routine right after.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_poll_transmitter_now(ucc_slow_private_t * uccs);
+
+/* ucc_slow_graceful_stop_tx
+ * Smoothly stops transmission on a specified slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_graceful_stop_tx(ucc_slow_private_t * uccs);
+
+/* ucc_slow_stop_tx
+ * Stops transmission on a specified slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_stop_tx(ucc_slow_private_t * uccs);
+
+/* ucc_slow_restart_x
+ * Restarts transmitting on a specified slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_restart_x(ucc_slow_private_t * uccs);
+
+u32 ucc_slow_get_qe_cr_subblock(int uccs_num);
+
+#endif /* __UCC_SLOW_H__ */
diff --git a/include/asm-ppc/mpc83xx.h b/include/asm-ppc/mpc83xx.h
index 3c23fc4..6acd82f 100644
--- a/include/asm-ppc/mpc83xx.h
+++ b/include/asm-ppc/mpc83xx.h
@@ -62,12 +62,17 @@ #define MPC83xx_IRQ_EXT4 (20 + MPC83xx_I
#define MPC83xx_IRQ_EXT5 (21 + MPC83xx_IPIC_IRQ_OFFSET)
#define MPC83xx_IRQ_EXT6 (22 + MPC83xx_IPIC_IRQ_OFFSET)
#define MPC83xx_IRQ_EXT7 (23 + MPC83xx_IPIC_IRQ_OFFSET)
+#ifdef CONFIG_QUICC_ENGINE
+#define MPC83xx_IRQ_QE_HIGH (32 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_QE_LOW (33 + MPC83xx_IPIC_IRQ_OFFSET)
+#else
#define MPC83xx_IRQ_TSEC1_TX (32 + MPC83xx_IPIC_IRQ_OFFSET)
#define MPC83xx_IRQ_TSEC1_RX (33 + MPC83xx_IPIC_IRQ_OFFSET)
#define MPC83xx_IRQ_TSEC1_ERROR (34 + MPC83xx_IPIC_IRQ_OFFSET)
#define MPC83xx_IRQ_TSEC2_TX (35 + MPC83xx_IPIC_IRQ_OFFSET)
#define MPC83xx_IRQ_TSEC2_RX (36 + MPC83xx_IPIC_IRQ_OFFSET)
#define MPC83xx_IRQ_TSEC2_ERROR (37 + MPC83xx_IPIC_IRQ_OFFSET)
+#endif
#define MPC83xx_IRQ_USB2_DR (38 + MPC83xx_IPIC_IRQ_OFFSET)
#define MPC83xx_IRQ_USB2_MPH (39 + MPC83xx_IPIC_IRQ_OFFSET)
#define MPC83xx_IRQ_EXT0 (48 + MPC83xx_IPIC_IRQ_OFFSET)
@@ -93,6 +98,29 @@ #define MPC83xx_IRQ_GTM7 (85 + MPC83xx_I
#define MPC83xx_IRQ_GTM1 (90 + MPC83xx_IPIC_IRQ_OFFSET)
#define MPC83xx_IRQ_GTM5 (91 + MPC83xx_IPIC_IRQ_OFFSET)
+#ifdef CONFIG_QUICC_ENGINE
+/* Internal IRQs on MPC83xx QE IC */
+/* Not all of these exist on all MPC83xx QE implementations */
+
+#ifndef MPC83xx_QE_IRQ_OFFSET
+#define MPC83xx_QE_IRQ_OFFSET NR_IPIC_INTS
+#endif /* MPC83xx_QE_IRQ_OFFSET */
+
+#define MPC83xx_NR_QE_IC_INTS 64
+
+#define MPC83xx_QE_IRQ_SPI2 (1 + MPC83xx_QE_IRQ_OFFSET)
+#define MPC83xx_QE_IRQ_SPI1 (2 + MPC83xx_QE_IRQ_OFFSET)
+#define MPC83xx_QE_IRQ_USB (11 + MPC83xx_QE_IRQ_OFFSET)
+#define MPC83xx_QE_IRQ_UCC1 (32 + MPC83xx_QE_IRQ_OFFSET)
+#define MPC83xx_QE_IRQ_UCC2 (33 + MPC83xx_QE_IRQ_OFFSET)
+#define MPC83xx_QE_IRQ_UCC3 (34 + MPC83xx_QE_IRQ_OFFSET)
+#define MPC83xx_QE_IRQ_UCC4 (35 + MPC83xx_QE_IRQ_OFFSET)
+#define MPC83xx_QE_IRQ_UCC5 (40 + MPC83xx_QE_IRQ_OFFSET)
+#define MPC83xx_QE_IRQ_UCC6 (41 + MPC83xx_QE_IRQ_OFFSET)
+#define MPC83xx_QE_IRQ_UCC7 (42 + MPC83xx_QE_IRQ_OFFSET)
+#define MPC83xx_QE_IRQ_UCC8 (43 + MPC83xx_QE_IRQ_OFFSET)
+#endif /* CONFIG_QE */
+
#define MPC83xx_CCSRBAR_SIZE (1024*1024)
/* Let modules/drivers get at immrbar (physical) */
@@ -109,6 +137,20 @@ enum ppc_sys_devices {
MPC83xx_USB2_MPH,
MPC83xx_MDIO,
NUM_PPC_SYS_DEVS,
+#ifdef CONFIG_QUICC_ENGINE
+ MPC83xx_QE_UCC1,
+ MPC83xx_QE_UCC2,
+ MPC83xx_QE_UCC3,
+ MPC83xx_QE_UCC4,
+ MPC83xx_QE_UCC5,
+ MPC83xx_QE_UCC6,
+ MPC83xx_QE_UCC7,
+ MPC83xx_QE_UCC8,
+ MPC83xx_QE_SPI1,
+ MPC83xx_QE_SPI2,
+ MPC83xx_QE_USB,
+#endif /* CONFIG_QE */
+
};
#endif /* CONFIG_83xx */
diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
index a3a0e07..532211c 100644
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -83,7 +83,6 @@ struct fsl_i2c_platform_data {
#define FSL_I2C_DEV_SEPARATE_DFSRR 0x00000001
#define FSL_I2C_DEV_CLOCK_5200 0x00000002
-
enum fsl_usb2_operating_modes {
FSL_USB2_MPH_HOST,
FSL_USB2_DR_HOST,
@@ -110,5 +109,43 @@ struct fsl_usb2_platform_data {
#define FSL_USB2_PORT0_ENABLED 0x00000001
#define FSL_USB2_PORT1_ENABLED 0x00000002
+/* Ethernet interface (phy management and speed)
+*/
+typedef enum enet_interface {
+ ENET_10_MII, /* 10 Base T, MII interface */
+ ENET_10_RMII, /* 10 Base T, RMII interface */
+ ENET_10_RGMII, /* 10 Base T, RGMII interface */
+ ENET_100_MII, /* 100 Base T, MII interface */
+ ENET_100_RMII, /* 100 Base T, RMII interface */
+ ENET_100_RGMII, /* 100 Base T, RGMII interface */
+ ENET_1000_GMII, /* 1000 Base T, GMII interface */
+ ENET_1000_RGMII, /* 1000 Base T, RGMII interface */
+ ENET_1000_TBI, /* 1000 Base T, TBI interface */
+ ENET_1000_RTBI /* 1000 Base T, RTBI interface */
+} enet_interface_e;
+
+struct ucc_geth_platform_data {
+ /* device specific information */
+ u32 device_flags;
+ u32 phy_reg_addr;
+
+ /* board specific information */
+ u32 board_flags;
+ u8 rx_clock;
+ u8 tx_clock;
+ u32 phy_id;
+ enet_interface_e phy_interface;
+ u32 phy_interrupt;
+ u8 mac_addr[6];
+};
+
+/* Flags related to UCC Gigabit Ethernet device features */
+#define FSL_UGETH_DEV_HAS_GIGABIT 0x00000001
+#define FSL_UGETH_DEV_HAS_COALESCE 0x00000002
+#define FSL_UGETH_DEV_HAS_RMON 0x00000004
+
+/* Flags in ucc_geth_platform_data */
+#define FSL_UGETH_BRD_HAS_PHY_INTR 0x00000001 /* if not set use a timer */
+
#endif /* _FSL_DEVICE_H_ */
#endif /* __KERNEL__ */
More information about the Linuxppc-dev
mailing list