[PATCH 4/7 v2] powerpc: Add QE library qe_lib--ucc support
Li Yang-r58472
LeoLi at freescale.com
Fri Jun 30 23:47:20 EST 2006
V2 change:
Remove private mm, and change to use rheap.
Remove complex Kconfig to use device tree.
Minor changes.
Below is content:
The patch series adds QE generic API qe_lib. QE is a new generation communication coprocessor in Freescale CPUs.
Signed-off-by: Shlomi Gridish <gridish at freescale.com>
Signed-off-by: Li Yang <leoli at freescale.com>
Signed-off-by: Kim Phillips <kim.phillips at freescale.com>
---
arch/powerpc/sysdev/qe_lib/ucc.c | 351 ++++++++++++++++++++++++++++
arch/powerpc/sysdev/qe_lib/ucc_fast.c | 413 +++++++++++++++++++++++++++++++++
arch/powerpc/sysdev/qe_lib/ucc_slow.c | 411 +++++++++++++++++++++++++++++++++
3 files changed, 1175 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/sysdev/qe_lib/ucc.c b/arch/powerpc/sysdev/qe_lib/ucc.c
new file mode 100644
index 0000000..e3eb680
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/ucc.c
@@ -0,0 +1,351 @@
+/*
+ * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
+ *
+ * Author: Shlomi Gridish <gridish at freescale.com>
+ *
+ * Description:
+ * QE UCC API Set - UCC specific routines implementations.
+ *
+ * Changelog:
+ * Jun 28, 2006 Li Yang <LeoLi at freescale.com>
+ * - Reorganized as qe_lib
+ * - Merged to powerpc arch; add device tree support
+ * - Style fixes
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+#include <asm/ucc.h>
+
+static DEFINE_SPINLOCK(ucc_lock);
+
+int ucc_set_qe_mux_mii_mng(int ucc_num)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ucc_lock, flags);
+ out_be32(&qe_immr->qmx.cmxgcr,
+ ((in_be32(&qe_immr->qmx.cmxgcr) &
+ ~QE_CMXGCR_MII_ENET_MNG) |
+ (ucc_num << QE_CMXGCR_MII_ENET_MNG_SHIFT)));
+ spin_unlock_irqrestore(&ucc_lock, flags);
+
+ return 0;
+}
+
+int ucc_set_type(int ucc_num, struct ucc_common *regs,
+ enum ucc_speed_type speed)
+{
+ u8 guemr = 0;
+
+ /* check if the UCC number is in range. */
+ if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0))
+ return -EINVAL;
+
+ guemr = regs->guemr;
+ guemr &= ~(UCC_GUEMR_MODE_MASK_RX | UCC_GUEMR_MODE_MASK_TX);
+ switch (speed) {
+ case UCC_SPEED_TYPE_SLOW:
+ guemr |= (UCC_GUEMR_MODE_SLOW_RX | UCC_GUEMR_MODE_SLOW_TX);
+ break;
+ case UCC_SPEED_TYPE_FAST:
+ guemr |= (UCC_GUEMR_MODE_FAST_RX | UCC_GUEMR_MODE_FAST_TX);
+ break;
+ default:
+ return -EINVAL;
+ }
+ regs->guemr = guemr;
+
+ return 0;
+}
+
+int ucc_init_guemr(struct ucc_common *regs)
+{
+ u8 guemr = 0;
+
+ if (!regs)
+ return -EINVAL;
+
+ /* Set bit 3 (which is reserved in the GUEMR register) to 1 */
+ guemr = UCC_GUEMR_SET_RESERVED3;
+
+ regs->guemr = guemr;
+
+ return 0;
+}
+
+static void get_cmxucr_reg(int ucc_num, volatile u32 ** p_cmxucr, u8 * reg_num,
+ u8 * shift)
+{
+ switch (ucc_num) {
+ case (0):
+ *p_cmxucr = &(qe_immr->qmx.cmxucr1);
+ *reg_num = 1;
+ *shift = 16;
+ break;
+ case (2):
+ *p_cmxucr = &(qe_immr->qmx.cmxucr1);
+ *reg_num = 1;
+ *shift = 0;
+ break;
+ case (4):
+ *p_cmxucr = &(qe_immr->qmx.cmxucr2);
+ *reg_num = 2;
+ *shift = 16;
+ break;
+ case (6):
+ *p_cmxucr = &(qe_immr->qmx.cmxucr2);
+ *reg_num = 2;
+ *shift = 0;
+ break;
+ case (1):
+ *p_cmxucr = &(qe_immr->qmx.cmxucr3);
+ *reg_num = 3;
+ *shift = 16;
+ break;
+ case (3):
+ *p_cmxucr = &(qe_immr->qmx.cmxucr3);
+ *reg_num = 3;
+ *shift = 0;
+ break;
+ case (5):
+ *p_cmxucr = &(qe_immr->qmx.cmxucr4);
+ *reg_num = 4;
+ *shift = 16;
+ break;
+ case (7):
+ *p_cmxucr = &(qe_immr->qmx.cmxucr4);
+ *reg_num = 4;
+ *shift = 0;
+ break;
+ default:
+ break;
+ }
+}
+
+int ucc_mux_set_grant_tsa_bkpt(int ucc_num, int set, u32 mask)
+{
+ volatile u32 *p_cmxucr;
+ u8 reg_num;
+ u8 shift;
+
+ /* check if the UCC number is in range. */
+ if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0))
+ return -EINVAL;
+
+ get_cmxucr_reg(ucc_num, &p_cmxucr, ®_num, &shift);
+
+ if (set)
+ out_be32(p_cmxucr, in_be32(p_cmxucr) | (mask << shift));
+ else
+ out_be32(p_cmxucr, in_be32(p_cmxucr) & ~(mask << shift));
+
+ return 0;
+}
+
+int ucc_set_qe_mux_rxtx(int ucc_num, qe_clock_e clock, comm_dir_e mode)
+{
+ volatile u32 *p_cmxucr;
+ u8 reg_num;
+ u8 shift;
+ u32 clockBits;
+ u32 clockMask;
+ int source = -1;
+
+ /* check if the UCC number is in range. */
+ if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0))
+ return -EINVAL;
+
+ if (!((mode == COMM_DIR_RX) || (mode == COMM_DIR_TX))) {
+ printk(KERN_ERR
+ "ucc_set_qe_mux_rxtx: bad comm mode type passed.");
+ return -EINVAL;
+ }
+
+ get_cmxucr_reg(ucc_num, &p_cmxucr, ®_num, &shift);
+
+ switch (reg_num) {
+ case (1):
+ switch (clock) {
+ case (QE_BRG1):
+ source = 1;
+ break;
+ case (QE_BRG2):
+ source = 2;
+ break;
+ case (QE_BRG7):
+ source = 3;
+ break;
+ case (QE_BRG8):
+ source = 4;
+ break;
+ case (QE_CLK9):
+ source = 5;
+ break;
+ case (QE_CLK10):
+ source = 6;
+ break;
+ case (QE_CLK11):
+ source = 7;
+ break;
+ case (QE_CLK12):
+ source = 8;
+ break;
+ case (QE_CLK15):
+ source = 9;
+ break;
+ case (QE_CLK16):
+ source = 10;
+ break;
+ default:
+ source = -1;
+ break;
+ }
+ break;
+ case (2):
+ switch (clock) {
+ case (QE_BRG5):
+ source = 1;
+ break;
+ case (QE_BRG6):
+ source = 2;
+ break;
+ case (QE_BRG7):
+ source = 3;
+ break;
+ case (QE_BRG8):
+ source = 4;
+ break;
+ case (QE_CLK13):
+ source = 5;
+ break;
+ case (QE_CLK14):
+ source = 6;
+ break;
+ case (QE_CLK19):
+ source = 7;
+ break;
+ case (QE_CLK20):
+ source = 8;
+ break;
+ case (QE_CLK15):
+ source = 9;
+ break;
+ case (QE_CLK16):
+ source = 10;
+ break;
+ default:
+ source = -1;
+ break;
+ }
+ break;
+ case (3):
+ switch (clock) {
+ case (QE_BRG9):
+ source = 1;
+ break;
+ case (QE_BRG10):
+ source = 2;
+ break;
+ case (QE_BRG15):
+ source = 3;
+ break;
+ case (QE_BRG16):
+ source = 4;
+ break;
+ case (QE_CLK3):
+ source = 5;
+ break;
+ case (QE_CLK4):
+ source = 6;
+ break;
+ case (QE_CLK17):
+ source = 7;
+ break;
+ case (QE_CLK18):
+ source = 8;
+ break;
+ case (QE_CLK7):
+ source = 9;
+ break;
+ case (QE_CLK8):
+ source = 10;
+ break;
+ default:
+ source = -1;
+ break;
+ }
+ break;
+ case (4):
+ switch (clock) {
+ case (QE_BRG13):
+ source = 1;
+ break;
+ case (QE_BRG14):
+ source = 2;
+ break;
+ case (QE_BRG15):
+ source = 3;
+ break;
+ case (QE_BRG16):
+ source = 4;
+ break;
+ case (QE_CLK5):
+ source = 5;
+ break;
+ case (QE_CLK6):
+ source = 6;
+ break;
+ case (QE_CLK21):
+ source = 7;
+ break;
+ case (QE_CLK22):
+ source = 8;
+ break;
+ case (QE_CLK7):
+ source = 9;
+ break;
+ case (QE_CLK8):
+ source = 10;
+ break;
+ default:
+ source = -1;
+ break;
+ }
+ break;
+ default:
+ source = -1;
+ break;
+ }
+
+ if (source == -1) {
+ printk(KERN_ERR
+ "ucc_set_qe_mux_rxtx: Bad combination of clock and UCC.");
+ return -ENOENT;
+ }
+
+ clockBits = (u32) source;
+ clockMask = QE_CMXUCR_TX_CLK_SRC_MASK;
+ if (mode == COMM_DIR_RX) {
+ clockBits <<= 4; /* Rx field is 4 bits to left of Tx field */
+ clockMask <<= 4; /* Rx field is 4 bits to left of Tx field */
+ }
+ clockBits <<= shift;
+ clockMask <<= shift;
+
+ out_be32(p_cmxucr, (in_be32(p_cmxucr) & ~clockMask) | clockBits);
+
+ return 0;
+}
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_fast.c b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
new file mode 100644
index 0000000..4c94259
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
@@ -0,0 +1,413 @@
+/*
+ * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
+ *
+ * Author: Shlomi Gridish <gridish at freescale.com>
+ *
+ * Description:
+ * QE UCC Fast API Set - UCC Fast specific routines implementations.
+ *
+ * Changelog:
+ * Jun 28, 2006 Li Yang <LeoLi at freescale.com>
+ * - Reorganized as qe_lib
+ * - Merged to powerpc arch; add device tree support
+ * - Style fixes
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+#include <linux/interrupt.h>
+
+#include <asm/io.h>
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+
+#include <asm/ucc.h>
+#include <asm/ucc_fast.h>
+
+#define uccf_printk(level, format, arg...) \
+ printk(level format "\n", ## arg)
+
+#define uccf_dbg(format, arg...) \
+ uccf_printk(KERN_DEBUG , format , ## arg)
+#define uccf_err(format, arg...) \
+ uccf_printk(KERN_ERR , format , ## arg)
+#define uccf_info(format, arg...) \
+ uccf_printk(KERN_INFO , format , ## arg)
+#define uccf_warn(format, arg...) \
+ uccf_printk(KERN_WARNING , format , ## arg)
+
+#ifdef UCCF_VERBOSE_DEBUG
+#define uccf_vdbg uccf_dbg
+#else
+#define uccf_vdbg(fmt, args...) do { } while (0)
+#endif /* UCCF_VERBOSE_DEBUG */
+
+void ucc_fast_dump_regs(ucc_fast_private_t * uccf)
+{
+ uccf_info("UCC%d Fast registers:", uccf->uf_info->ucc_num);
+ uccf_info("Base address: 0x%08x", (u32) uccf->uf_regs);
+
+ uccf_info("gumr : addr - 0x%08x, val - 0x%08x",
+ (u32) & uccf->uf_regs->gumr, in_be32(&uccf->uf_regs->gumr));
+ uccf_info("upsmr : addr - 0x%08x, val - 0x%08x",
+ (u32) & uccf->uf_regs->upsmr, in_be32(&uccf->uf_regs->upsmr));
+ uccf_info("utodr : addr - 0x%08x, val - 0x%04x",
+ (u32) & uccf->uf_regs->utodr, in_be16(&uccf->uf_regs->utodr));
+ uccf_info("udsr : addr - 0x%08x, val - 0x%04x",
+ (u32) & uccf->uf_regs->udsr, in_be16(&uccf->uf_regs->udsr));
+ uccf_info("ucce : addr - 0x%08x, val - 0x%08x",
+ (u32) & uccf->uf_regs->ucce, in_be32(&uccf->uf_regs->ucce));
+ uccf_info("uccm : addr - 0x%08x, val - 0x%08x",
+ (u32) & uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm));
+ uccf_info("uccs : addr - 0x%08x, val - 0x%02x",
+ (u32) & uccf->uf_regs->uccs, uccf->uf_regs->uccs);
+ uccf_info("urfb : addr - 0x%08x, val - 0x%08x",
+ (u32) & uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb));
+ uccf_info("urfs : addr - 0x%08x, val - 0x%04x",
+ (u32) & uccf->uf_regs->urfs, in_be16(&uccf->uf_regs->urfs));
+ uccf_info("urfet : addr - 0x%08x, val - 0x%04x",
+ (u32) & uccf->uf_regs->urfet, in_be16(&uccf->uf_regs->urfet));
+ uccf_info("urfset: addr - 0x%08x, val - 0x%04x",
+ (u32) & uccf->uf_regs->urfset,
+ in_be16(&uccf->uf_regs->urfset));
+ uccf_info("utfb : addr - 0x%08x, val - 0x%08x",
+ (u32) & uccf->uf_regs->utfb, in_be32(&uccf->uf_regs->utfb));
+ uccf_info("utfs : addr - 0x%08x, val - 0x%04x",
+ (u32) & uccf->uf_regs->utfs, in_be16(&uccf->uf_regs->utfs));
+ uccf_info("utfet : addr - 0x%08x, val - 0x%04x",
+ (u32) & uccf->uf_regs->utfet, in_be16(&uccf->uf_regs->utfet));
+ uccf_info("utftt : addr - 0x%08x, val - 0x%04x",
+ (u32) & uccf->uf_regs->utftt, in_be16(&uccf->uf_regs->utftt));
+ uccf_info("utpt : addr - 0x%08x, val - 0x%04x",
+ (u32) & uccf->uf_regs->utpt, in_be16(&uccf->uf_regs->utpt));
+ uccf_info("urtry : addr - 0x%08x, val - 0x%08x",
+ (u32) & uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry));
+ uccf_info("guemr : addr - 0x%08x, val - 0x%02x",
+ (u32) & uccf->uf_regs->guemr, uccf->uf_regs->guemr);
+}
+
+u32 ucc_fast_get_qe_cr_subblock(int uccf_num)
+{
+ switch (uccf_num) {
+ case (0):
+ return (QE_CR_SUBBLOCK_UCCFAST1);
+ case (1):
+ return (QE_CR_SUBBLOCK_UCCFAST2);
+ case (2):
+ return (QE_CR_SUBBLOCK_UCCFAST3);
+ case (3):
+ return (QE_CR_SUBBLOCK_UCCFAST4);
+ case (4):
+ return (QE_CR_SUBBLOCK_UCCFAST5);
+ case (5):
+ return (QE_CR_SUBBLOCK_UCCFAST6);
+ case (6):
+ return (QE_CR_SUBBLOCK_UCCFAST7);
+ case (7):
+ return (QE_CR_SUBBLOCK_UCCFAST8);
+ default:
+ return QE_CR_SUBBLOCK_INVALID;
+ }
+}
+
+void ucc_fast_transmit_on_demand(ucc_fast_private_t * uccf)
+{
+ out_be16(&uccf->uf_regs->utodr, UCC_FAST_TOD);
+}
+
+void ucc_fast_enable(ucc_fast_private_t * uccf, comm_dir_e mode)
+{
+ ucc_fast_t *uf_regs;
+ u32 gumr;
+
+ uf_regs = uccf->uf_regs;
+
+ /* Enable reception and/or transmission on this UCC. */
+ gumr = in_be32(&uf_regs->gumr);
+ if (mode & COMM_DIR_TX) {
+ gumr |= UCC_FAST_GUMR_ENT;
+ uccf->enabled_tx = 1;
+ }
+ if (mode & COMM_DIR_RX) {
+ gumr |= UCC_FAST_GUMR_ENR;
+ uccf->enabled_rx = 1;
+ }
+ out_be32(&uf_regs->gumr, gumr);
+}
+
+void ucc_fast_disable(ucc_fast_private_t * uccf, comm_dir_e mode)
+{
+ ucc_fast_t *uf_regs;
+ u32 gumr;
+
+ uf_regs = uccf->uf_regs;
+
+ /* Disable reception and/or transmission on this UCC. */
+ gumr = in_be32(&uf_regs->gumr);
+ if (mode & COMM_DIR_TX) {
+ gumr &= ~UCC_FAST_GUMR_ENT;
+ uccf->enabled_tx = 0;
+ }
+ if (mode & COMM_DIR_RX) {
+ gumr &= ~UCC_FAST_GUMR_ENR;
+ uccf->enabled_rx = 0;
+ }
+ out_be32(&uf_regs->gumr, gumr);
+}
+
+int ucc_fast_init(ucc_fast_info_t * uf_info, ucc_fast_private_t ** uccf_ret)
+{
+ ucc_fast_private_t *uccf;
+ ucc_fast_t *uf_regs;
+ u32 gumr = 0;
+ int ret;
+
+ uccf_vdbg("%s: IN", __FUNCTION__);
+
+ if (!uf_info)
+ return -EINVAL;
+
+ /* check if the UCC port number is in range. */
+ if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) {
+ uccf_err("ucc_fast_init: Illagal UCC number!");
+ return -EINVAL;
+ }
+
+ /* Check that 'max_rx_buf_length' is properly aligned (4). */
+ if (uf_info->max_rx_buf_length & (UCC_FAST_MRBLR_ALIGNMENT - 1)) {
+ uccf_err("ucc_fast_init: max_rx_buf_length not aligned.");
+ return -EINVAL;
+ }
+
+ /* Validate Virtual Fifo register values */
+ if (uf_info->urfs < UCC_FAST_URFS_MIN_VAL) {
+ uccf_err
+ ("ucc_fast_init: Virtual Fifo register urfs too small.");
+ return -EINVAL;
+ }
+
+ if (uf_info->urfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+ uccf_err
+ ("ucc_fast_init: Virtual Fifo register urfs not aligned.");
+ return -EINVAL;
+ }
+
+ if (uf_info->urfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+ uccf_err
+ ("ucc_fast_init: Virtual Fifo register urfet not aligned.");
+ return -EINVAL;
+ }
+
+ if (uf_info->urfset & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+ uccf_err
+ ("ucc_fast_init: Virtual Fifo register urfset not aligned.");
+ return -EINVAL;
+ }
+
+ if (uf_info->utfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+ uccf_err
+ ("ucc_fast_init: Virtual Fifo register utfs not aligned.");
+ return -EINVAL;
+ }
+
+ if (uf_info->utfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+ uccf_err
+ ("ucc_fast_init: Virtual Fifo register utfet not aligned.");
+ return -EINVAL;
+ }
+
+ if (uf_info->utftt & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+ uccf_err
+ ("ucc_fast_init: Virtual Fifo register utftt not aligned.");
+ return -EINVAL;
+ }
+
+ uccf =
+ (ucc_fast_private_t *) kmalloc(sizeof(ucc_fast_private_t),
+ GFP_KERNEL);
+ if (!uccf) {
+ uccf_err
+ ("ucc_fast_init: No memory for UCC slow data structure!");
+ return -ENOMEM;
+ }
+ memset(uccf, 0, sizeof(ucc_fast_private_t));
+
+ /* Fill fast UCC structure */
+ uccf->uf_info = uf_info;
+ /* Set the PHY base address */
+ uccf->uf_regs =
+ (ucc_fast_t *) ioremap(uf_info->regs, sizeof(ucc_fast_t));
+ if (uccf->uf_regs == NULL) {
+ uccf_err
+ ("ucc_fast_init: No memory map for UCC slow controller!");
+ return -ENOMEM;
+ }
+
+ uccf->enabled_tx = 0;
+ uccf->enabled_rx = 0;
+ uccf->stopped_tx = 0;
+ uccf->stopped_rx = 0;
+ uf_regs = uccf->uf_regs;
+ uccf->p_ucce = (u32 *) & (uf_regs->ucce);
+ uccf->p_uccm = (u32 *) & (uf_regs->uccm);
+#ifdef STATISTICS
+ uccf->tx_frames = 0;
+ uccf->rx_frames = 0;
+ uccf->rx_discarded = 0;
+#endif /* STATISTICS */
+
+ /* Init Guemr register */
+ if ((ret = ucc_init_guemr((ucc_common_t *) (uf_regs)))) {
+ uccf_err("ucc_fast_init: Could not init the guemr register.");
+ ucc_fast_free(uccf);
+ return ret;
+ }
+
+ /* Set UCC to fast type */
+ if ((ret = ucc_set_type(uf_info->ucc_num,
+ (ucc_common_t *) (uf_regs),
+ UCC_SPEED_TYPE_FAST))) {
+ uccf_err("ucc_fast_init: Could not set type to fast.");
+ ucc_fast_free(uccf);
+ return ret;
+ }
+
+ uccf->mrblr = uf_info->max_rx_buf_length;
+
+ /* Set GUMR. */
+ /* For more details see the hardware spec. */
+ /* gumr starts as zero. */
+ if (uf_info->tci)
+ gumr |= UCC_FAST_GUMR_TCI;
+ gumr |= uf_info->ttx_trx;
+ if (uf_info->cdp)
+ gumr |= UCC_FAST_GUMR_CDP;
+ if (uf_info->ctsp)
+ gumr |= UCC_FAST_GUMR_CTSP;
+ if (uf_info->cds)
+ gumr |= UCC_FAST_GUMR_CDS;
+ if (uf_info->ctss)
+ gumr |= UCC_FAST_GUMR_CTSS;
+ if (uf_info->txsy)
+ gumr |= UCC_FAST_GUMR_TXSY;
+ if (uf_info->rsyn)
+ gumr |= UCC_FAST_GUMR_RSYN;
+ gumr |= uf_info->synl;
+ if (uf_info->rtsm)
+ gumr |= UCC_FAST_GUMR_RTSM;
+ gumr |= uf_info->renc;
+ if (uf_info->revd)
+ gumr |= UCC_FAST_GUMR_REVD;
+ gumr |= uf_info->tenc;
+ gumr |= uf_info->tcrc;
+ gumr |= uf_info->mode;
+ out_be32(&uf_regs->gumr, gumr);
+
+ /* Allocate memory for Tx Virtual Fifo */
+ uccf->ucc_fast_tx_virtual_fifo_base_offset =
+ qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
+ if (IS_MURAM_ERR(uccf->ucc_fast_tx_virtual_fifo_base_offset)) {
+ uccf_err
+ ("ucc_fast_init: Can not allocate MURAM memory for "
+ "ucc_fast_tx_virtual_fifo_base_offset.");
+ uccf->ucc_fast_tx_virtual_fifo_base_offset = 0;
+ ucc_fast_free(uccf);
+ return -ENOMEM;
+ }
+
+ /* Allocate memory for Rx Virtual Fifo */
+ uccf->ucc_fast_rx_virtual_fifo_base_offset =
+ qe_muram_alloc(uf_info->urfs +
+ (u32)
+ UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR,
+ UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
+ if (IS_MURAM_ERR(uccf->ucc_fast_rx_virtual_fifo_base_offset)) {
+ uccf_err
+ ("ucc_fast_init: Can not allocate MURAM memory for "
+ "ucc_fast_rx_virtual_fifo_base_offset.");
+ uccf->ucc_fast_rx_virtual_fifo_base_offset = 0;
+ ucc_fast_free(uccf);
+ return -ENOMEM;
+ }
+
+ /* Set Virtual Fifo registers */
+ out_be16(&uf_regs->urfs, uf_info->urfs);
+ out_be16(&uf_regs->urfet, uf_info->urfet);
+ out_be16(&uf_regs->urfset, uf_info->urfset);
+ out_be16(&uf_regs->utfs, uf_info->utfs);
+ out_be16(&uf_regs->utfet, uf_info->utfet);
+ out_be16(&uf_regs->utftt, uf_info->utftt);
+ /* utfb, urfb are offsets from MURAM base */
+ out_be32(&uf_regs->utfb, uccf->ucc_fast_tx_virtual_fifo_base_offset);
+ out_be32(&uf_regs->urfb, uccf->ucc_fast_rx_virtual_fifo_base_offset);
+
+ /* Mux clocking */
+ /* Grant Support */
+ ucc_set_qe_mux_grant(uf_info->ucc_num, uf_info->grant_support);
+ /* Breakpoint Support */
+ ucc_set_qe_mux_bkpt(uf_info->ucc_num, uf_info->brkpt_support);
+ /* Set Tsa or NMSI mode. */
+ ucc_set_qe_mux_tsa(uf_info->ucc_num, uf_info->tsa);
+ /* If NMSI (not Tsa), set Tx and Rx clock. */
+ if (!uf_info->tsa) {
+ /* Rx clock routing */
+ if (uf_info->rx_clock != QE_CLK_NONE) {
+ if (ucc_set_qe_mux_rxtx
+ (uf_info->ucc_num, uf_info->rx_clock,
+ COMM_DIR_RX)) {
+ uccf_err
+ ("ucc_fast_init: Illegal value for parameter 'RxClock'.");
+ ucc_fast_free(uccf);
+ return -EINVAL;
+ }
+ }
+ /* Tx clock routing */
+ if (uf_info->tx_clock != QE_CLK_NONE) {
+ if (ucc_set_qe_mux_rxtx
+ (uf_info->ucc_num, uf_info->tx_clock,
+ COMM_DIR_TX)) {
+ uccf_err
+ ("ucc_fast_init: Illegal value for parameter 'TxClock'.");
+ ucc_fast_free(uccf);
+ return -EINVAL;
+ }
+ }
+ }
+
+ /*
+ * INTERRUPTS
+ */
+ /* Set interrupt mask register at UCC level. */
+ out_be32(&uf_regs->uccm, uf_info->uccm_mask);
+
+ /* First, clear anything pending at UCC level, */
+ /* otherwise, old garbage may come through */
+ /* as soon as the dam is opened. */
+
+ /* Writing '1' clears */
+ out_be32(&uf_regs->ucce, 0xffffffff);
+
+ *uccf_ret = uccf;
+ return 0;
+}
+
+void ucc_fast_free(ucc_fast_private_t * uccf)
+{
+ if (!uccf)
+ return;
+
+ if (uccf->ucc_fast_tx_virtual_fifo_base_offset)
+ qe_muram_free(uccf->ucc_fast_tx_virtual_fifo_base_offset);
+
+ if (uccf->ucc_fast_rx_virtual_fifo_base_offset)
+ qe_muram_free(uccf->ucc_fast_rx_virtual_fifo_base_offset);
+
+ kfree(uccf);
+}
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
new file mode 100644
index 0000000..9ded1b5
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
@@ -0,0 +1,411 @@
+/*
+ * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
+ *
+ * Author: Shlomi Gridish <gridish at freescale.com>
+ *
+ * Description:
+ * QE UCC Slow API Set - UCC Slow specific routines implementations.
+ *
+ * Changelog:
+ * Jun 28, 2006 Li Yang <LeoLi at freescale.com>
+ * - Reorganized as qe_lib
+ * - Merged to powerpc arch; add device tree support
+ * - Style fixes
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+#include <linux/interrupt.h>
+
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+
+#include <asm/ucc.h>
+#include <asm/ucc_slow.h>
+
+#define uccs_printk(level, format, arg...) \
+ printk(level format "\n", ## arg)
+
+#define uccs_dbg(format, arg...) \
+ uccs_printk(KERN_DEBUG , format , ## arg)
+#define uccs_err(format, arg...) \
+ uccs_printk(KERN_ERR , format , ## arg)
+#define uccs_info(format, arg...) \
+ uccs_printk(KERN_INFO , format , ## arg)
+#define uccs_warn(format, arg...) \
+ uccs_printk(KERN_WARNING , format , ## arg)
+
+#ifdef UCCS_VERBOSE_DEBUG
+#define uccs_vdbg uccs_dbg
+#else
+#define uccs_vdbg(fmt, args...) do { } while (0)
+#endif /* UCCS_VERBOSE_DEBUG */
+
+u32 ucc_slow_get_qe_cr_subblock(int uccs_num)
+{
+ switch (uccs_num) {
+ case (0):
+ return (QE_CR_SUBBLOCK_UCCSLOW1);
+ case (1):
+ return (QE_CR_SUBBLOCK_UCCSLOW2);
+ case (2):
+ return (QE_CR_SUBBLOCK_UCCSLOW3);
+ case (3):
+ return (QE_CR_SUBBLOCK_UCCSLOW4);
+ case (4):
+ return (QE_CR_SUBBLOCK_UCCSLOW5);
+ case (5):
+ return (QE_CR_SUBBLOCK_UCCSLOW6);
+ case (6):
+ return (QE_CR_SUBBLOCK_UCCSLOW7);
+ case (7):
+ return (QE_CR_SUBBLOCK_UCCSLOW8);
+ default:
+ return QE_CR_SUBBLOCK_INVALID;
+ }
+}
+
+void ucc_slow_poll_transmitter_now(ucc_slow_private_t * uccs)
+{
+ out_be16(&uccs->us_regs->utodr, UCC_SLOW_TOD);
+}
+
+void ucc_slow_graceful_stop_tx(ucc_slow_private_t * uccs)
+{
+ ucc_slow_info_t *us_info = uccs->us_info;
+ u32 id;
+
+ id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
+ qe_issue_cmd(QE_GRACEFUL_STOP_TX, id, (u8) QE_CR_PROTOCOL_UNSPECIFIED,
+ 0);
+}
+
+void ucc_slow_stop_tx(ucc_slow_private_t * uccs)
+{
+ ucc_slow_info_t *us_info = uccs->us_info;
+ u32 id;
+
+ id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
+ qe_issue_cmd(QE_STOP_TX, id, (u8) QE_CR_PROTOCOL_UNSPECIFIED, 0);
+}
+
+void ucc_slow_restart_tx(ucc_slow_private_t * uccs)
+{
+ ucc_slow_info_t *us_info = uccs->us_info;
+ u32 id;
+
+ id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
+ qe_issue_cmd(QE_RESTART_TX, id, (u8) QE_CR_PROTOCOL_UNSPECIFIED, 0);
+}
+
+void ucc_slow_enable(ucc_slow_private_t * uccs, comm_dir_e mode)
+{
+ ucc_slow_t *us_regs;
+ u32 gumr_l;
+
+ us_regs = uccs->us_regs;
+
+ /* Enable reception and/or transmission on this UCC. */
+ gumr_l = in_be32(&us_regs->gumr_l);
+ if (mode & COMM_DIR_TX) {
+ gumr_l |= UCC_SLOW_GUMR_L_ENT;
+ uccs->enabled_tx = 1;
+ }
+ if (mode & COMM_DIR_RX) {
+ gumr_l |= UCC_SLOW_GUMR_L_ENR;
+ uccs->enabled_rx = 1;
+ }
+ out_be32(&us_regs->gumr_l, gumr_l);
+}
+
+void ucc_slow_disable(ucc_slow_private_t * uccs, comm_dir_e mode)
+{
+ ucc_slow_t *us_regs;
+ u32 gumr_l;
+
+ us_regs = uccs->us_regs;
+
+ /* Disable reception and/or transmission on this UCC. */
+ gumr_l = in_be32(&us_regs->gumr_l);
+ if (mode & COMM_DIR_TX) {
+ gumr_l &= ~UCC_SLOW_GUMR_L_ENT;
+ uccs->enabled_tx = 0;
+ }
+ if (mode & COMM_DIR_RX) {
+ gumr_l &= ~UCC_SLOW_GUMR_L_ENR;
+ uccs->enabled_rx = 0;
+ }
+ out_be32(&us_regs->gumr_l, gumr_l);
+}
+
+int ucc_slow_init(ucc_slow_info_t * us_info, ucc_slow_private_t ** uccs_ret)
+{
+ u32 i;
+ ucc_slow_t *us_regs;
+ u32 gumr;
+ u8 function_code = 0;
+ u8 *bd;
+ ucc_slow_private_t *uccs;
+ u32 id;
+ u32 command;
+ int ret;
+
+ uccs_vdbg("%s: IN", __FUNCTION__);
+
+ if (!us_info)
+ return -EINVAL;
+
+ /* check if the UCC port number is in range. */
+ if ((us_info->ucc_num < 0) || (us_info->ucc_num > UCC_MAX_NUM - 1)) {
+ uccs_err("ucc_slow_init: Illagal UCC number!");
+ return -EINVAL;
+ }
+
+ /* Set mrblr */
+ /* Check that 'max_rx_buf_length' is properly aligned (4), unless
+ rfw is 1, meaning that QE accepts one byte at a time, unlike normal
+ case when QE accepts 32 bits at a time. */
+ if ((!us_info->rfw)
+ && (us_info->max_rx_buf_length & (UCC_SLOW_MRBLR_ALIGNMENT - 1))) {
+ uccs_err("max_rx_buf_length not aligned.");
+ return -EINVAL;
+ }
+
+ uccs =
+ (ucc_slow_private_t *) kmalloc(sizeof(ucc_slow_private_t),
+ GFP_KERNEL);
+ if (!uccs) {
+ uccs_err
+ ("ucc_slow_init: No memory for UCC slow data structure!");
+ return -ENOMEM;
+ }
+ memset(uccs, 0, sizeof(ucc_slow_private_t));
+
+ /* Fill slow UCC structure */
+ uccs->us_info = us_info;
+ uccs->saved_uccm = 0;
+ uccs->p_rx_frame = 0;
+ uccs->us_regs = us_info->us_regs;
+ us_regs = uccs->us_regs;
+ uccs->p_ucce = (u16 *) & (us_regs->ucce);
+ uccs->p_uccm = (u16 *) & (us_regs->uccm);
+#ifdef STATISTICS
+ uccs->rx_frames = 0;
+ uccs->tx_frames = 0;
+ uccs->rx_discarded = 0;
+#endif /* STATISTICS */
+
+ /* Get PRAM base */
+ uccs->us_pram_offset =
+ qe_muram_alloc(UCC_SLOW_PRAM_SIZE, ALIGNMENT_OF_UCC_SLOW_PRAM);
+ if (IS_MURAM_ERR(uccs->us_pram_offset)) {
+ uccs_err
+ ("ucc_slow_init: Can not allocate MURAM memory " \
+ "for Slow UCC.");
+ ucc_slow_free(uccs);
+ return -ENOMEM;
+ }
+ id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
+ qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, id, QE_CR_PROTOCOL_UNSPECIFIED,
+ (u32) uccs->us_pram_offset);
+
+ uccs->us_pram = qe_muram_addr(uccs->us_pram_offset);
+
+ /* Init Guemr register */
+ if ((ret = ucc_init_guemr((ucc_common_t *) (us_info->us_regs)))) {
+ uccs_err("ucc_slow_init: Could not init the guemr register.");
+ ucc_slow_free(uccs);
+ return ret;
+ }
+
+ /* Set UCC to slow type */
+ if ((ret = ucc_set_type(us_info->ucc_num,
+ (ucc_common_t *) (us_info->us_regs),
+ UCC_SPEED_TYPE_SLOW))) {
+ uccs_err("ucc_slow_init: Could not init the guemr register.");
+ ucc_slow_free(uccs);
+ return ret;
+ }
+
+ out_be16(&uccs->us_pram->mrblr, us_info->max_rx_buf_length);
+
+ INIT_LIST_HEAD(&uccs->confQ);
+
+ /* Allocate BDs. */
+ uccs->rx_base_offset =
+ qe_muram_alloc(us_info->rx_bd_ring_len * UCC_SLOW_SIZE_OF_BD,
+ QE_ALIGNMENT_OF_BD);
+ if (IS_MURAM_ERR(uccs->rx_base_offset)) {
+ uccs_err("ucc_slow_init: No memory for Rx BD's.");
+ uccs->rx_base_offset = 0;
+ ucc_slow_free(uccs);
+ return -ENOMEM;
+ }
+
+ uccs->tx_base_offset =
+ qe_muram_alloc(us_info->tx_bd_ring_len * UCC_SLOW_SIZE_OF_BD,
+ QE_ALIGNMENT_OF_BD);
+ if (IS_MURAM_ERR(uccs->tx_base_offset)) {
+ uccs_err("ucc_slow_init: No memory for Tx BD's.");
+ uccs->tx_base_offset = 0;
+ ucc_slow_free(uccs);
+ return -ENOMEM;
+ }
+
+ /* Init Tx bds */
+ bd = uccs->confBd = uccs->tx_bd = qe_muram_addr(uccs->tx_base_offset);
+ for (i = 0; i < us_info->tx_bd_ring_len; i++) {
+ BD_BUFFER_CLEAR(bd);
+ BD_STATUS_AND_LENGTH_SET(bd, 0);
+ bd += QE_SIZEOF_BD;
+ }
+ bd -= QE_SIZEOF_BD;
+ BD_STATUS_AND_LENGTH_SET(bd, T_W); /* for last BD set Wrap bit */
+
+ /* Init Rx bds */
+ bd = uccs->rx_bd = qe_muram_addr(uccs->rx_base_offset);
+ for (i = 0; i < us_info->rx_bd_ring_len; i++) {
+ BD_STATUS_AND_LENGTH_SET(bd, 0);
+ BD_BUFFER_CLEAR(bd);
+ bd += QE_SIZEOF_BD;
+ }
+ bd -= QE_SIZEOF_BD;
+ BD_STATUS_AND_LENGTH_SET(bd, R_W); /* for last BD set Wrap bit */
+
+ /* Set GUMR (For more details see the hardware spec.). */
+ /* gumr_h */
+ gumr = 0;
+ gumr |= us_info->tcrc;
+ if (us_info->cdp)
+ gumr |= UCC_SLOW_GUMR_H_CDP;
+ if (us_info->ctsp)
+ gumr |= UCC_SLOW_GUMR_H_CTSP;
+ if (us_info->cds)
+ gumr |= UCC_SLOW_GUMR_H_CDS;
+ if (us_info->ctss)
+ gumr |= UCC_SLOW_GUMR_H_CTSS;
+ if (us_info->tfl)
+ gumr |= UCC_SLOW_GUMR_H_TFL;
+ if (us_info->rfw)
+ gumr |= UCC_SLOW_GUMR_H_RFW;
+ if (us_info->txsy)
+ gumr |= UCC_SLOW_GUMR_H_TXSY;
+ if (us_info->rtsm)
+ gumr |= UCC_SLOW_GUMR_H_RTSM;
+ out_be32(&us_regs->gumr_h, gumr);
+
+ /* gumr_l */
+ gumr = 0;
+ if (us_info->tci)
+ gumr |= UCC_SLOW_GUMR_L_TCI;
+ if (us_info->rinv)
+ gumr |= UCC_SLOW_GUMR_L_RINV;
+ if (us_info->tinv)
+ gumr |= UCC_SLOW_GUMR_L_TINV;
+ if (us_info->tend)
+ gumr |= UCC_SLOW_GUMR_L_TEND;
+ gumr |= us_info->tdcr;
+ gumr |= us_info->rdcr;
+ gumr |= us_info->tenc;
+ gumr |= us_info->renc;
+ gumr |= us_info->diag;
+ gumr |= us_info->mode;
+ out_be32(&us_regs->gumr_l, gumr);
+
+ /* Function code registers */
+ /* function_code has initial value 0 */
+
+ /* if the data is in cachable memory, the 'global' */
+ /* in the function code should be set. */
+ function_code |= us_info->data_mem_part;
+ function_code |= QE_BMR_BYTE_ORDER_BO_MOT; /* Required for QE */
+ uccs->us_pram->tfcr = function_code;
+ uccs->us_pram->rfcr = function_code;
+
+ /* rbase, tbase are offsets from MURAM base */
+ out_be16(&uccs->us_pram->rbase, uccs->us_pram_offset);
+ out_be16(&uccs->us_pram->tbase, uccs->us_pram_offset);
+
+ /* Mux clocking */
+ /* Grant Support */
+ ucc_set_qe_mux_grant(us_info->ucc_num, us_info->grant_support);
+ /* Breakpoint Support */
+ ucc_set_qe_mux_bkpt(us_info->ucc_num, us_info->brkpt_support);
+ /* Set Tsa or NMSI mode. */
+ ucc_set_qe_mux_tsa(us_info->ucc_num, us_info->tsa);
+ /* If NMSI (not Tsa), set Tx and Rx clock. */
+ if (!us_info->tsa) {
+ /* Rx clock routing */
+ if (ucc_set_qe_mux_rxtx
+ (us_info->ucc_num, us_info->rx_clock, COMM_DIR_RX)) {
+ uccs_err
+ ("ucc_slow_init: Illegal value for parameter" \
+ " 'RxClock'.");
+ ucc_slow_free(uccs);
+ return -EINVAL;
+ }
+ /* Tx clock routing */
+ if (ucc_set_qe_mux_rxtx
+ (us_info->ucc_num, us_info->tx_clock, COMM_DIR_TX)) {
+ uccs_err
+ ("ucc_slow_init: Illegal value for parameter " \
+ "'TxClock'.");
+ ucc_slow_free(uccs);
+ return -EINVAL;
+ }
+ }
+
+ /*
+ * INTERRUPTS
+ */
+ /* Set interrupt mask register at UCC level. */
+ out_be16(&us_regs->uccm, us_info->uccm_mask);
+
+ /* First, clear anything pending at UCC level, */
+ /* otherwise, old garbage may come through */
+ /* as soon as the dam is opened. */
+
+ /* Writing '1' clears */
+ out_be16(&us_regs->ucce, 0xffff);
+
+ /* Issue QE Init command */
+ if (us_info->init_tx && us_info->init_rx)
+ command = QE_INIT_TX_RX;
+ else if (us_info->init_tx)
+ command = QE_INIT_TX;
+ else
+ command = QE_INIT_RX; /* We know at least one is TRUE */
+ id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
+ qe_issue_cmd(command, id, (u8) QE_CR_PROTOCOL_UNSPECIFIED, 0);
+
+ *uccs_ret = uccs;
+ return 0;
+}
+
+void ucc_slow_free(ucc_slow_private_t * uccs)
+{
+ if (!uccs)
+ return;
+
+ if (uccs->rx_base_offset)
+ qe_muram_free(uccs->rx_base_offset);
+
+ if (uccs->tx_base_offset)
+ qe_muram_free(uccs->tx_base_offset);
+
+ if (uccs->us_pram) {
+ qe_muram_free(uccs->us_pram_offset);
+ uccs->us_pram = NULL;
+ }
+
+ kfree(uccs);
+}
More information about the Linuxppc-dev
mailing list