patches applied to powerpc.git
Zang Roy-r61911
tie-fei.zang at freescale.com
Wed Jun 28 17:14:10 EST 2006
Hi, Paul
I have submitted the "v2" version for mpc7448hpc2 board support in arch/powerpc/platforms/embedded6xx.
I have not got any suggestion, since I submitted the code.
In this submission I have addressed all the issues brought up in the "v1" submission.
So could you help me merge the patches into your git tree ? If there is any comment about the code, please let me know.
Thanks a lot!
Roy
>
> The following patches have just been pushed to the
> powerpc.git repository ("master" branch). I'll ask Linus to
> pull them tomorrow unless I hear any objections. If you have
> patches that you want upstream that aren't listed, bug me or
> the appropriate platform maintainer about them.
>
> Paul.
>
> arch/powerpc/Kconfig | 8 +
> arch/powerpc/Kconfig.debug | 9 +
> arch/powerpc/configs/cell_defconfig | 7 +
> arch/powerpc/kernel/Makefile | 3
> arch/powerpc/kernel/cpu_setup_power4.S | 14 ++
> arch/powerpc/kernel/crash.c | 147 +++++++++++++++---
> arch/powerpc/kernel/head_64.S | 51 ++----
> arch/powerpc/kernel/iommu.c | 30 ++++
> arch/powerpc/kernel/machine_kexec_64.c | 4 -
> arch/powerpc/kernel/misc.S | 203
> +++++++++++++++++++++++++
> arch/powerpc/kernel/misc_32.S | 156
> --------------------
> arch/powerpc/kernel/misc_64.S | 223
> +---------------------------
> arch/powerpc/kernel/paca.c | 1
> arch/powerpc/kernel/prom.c | 48 ++++--
> arch/powerpc/kernel/rtas.c | 119 +++++++++++++--
> arch/powerpc/kernel/setup_64.c | 19 +-
> arch/powerpc/kernel/traps.c | 27 ++-
> arch/powerpc/kernel/udbg.c | 7 +
> arch/powerpc/mm/hash_native_64.c | 3
> arch/powerpc/mm/hash_utils_64.c | 106 +++++--------
> arch/powerpc/platforms/86xx/Kconfig | 6 -
> arch/powerpc/platforms/86xx/Makefile | 3
> arch/powerpc/platforms/86xx/mpc8641_hpcn.h | 1
> arch/powerpc/platforms/86xx/mpc86xx_hpcn.c | 1
> arch/powerpc/platforms/86xx/mpc86xx_smp.c | 1
> arch/powerpc/platforms/86xx/pci.c | 1
> arch/powerpc/platforms/cell/Kconfig | 2
> arch/powerpc/platforms/cell/setup.c | 16 +-
> arch/powerpc/platforms/cell/spu_base.c | 8 +
> arch/powerpc/platforms/cell/spufs/file.c | 10 +
> arch/powerpc/platforms/cell/spufs/switch.c | 6 +
> arch/powerpc/platforms/iseries/htab.c | 4 -
> arch/powerpc/platforms/iseries/lpevents.c | 55 ++++---
> arch/powerpc/platforms/iseries/proc.c | 1
> arch/powerpc/platforms/iseries/setup.c | 19 --
> arch/powerpc/platforms/maple/setup.c | 7 -
> arch/powerpc/platforms/powermac/setup.c | 9 -
> arch/powerpc/platforms/pseries/iommu.c | 33 ++++
> arch/powerpc/platforms/pseries/lpar.c | 4 -
> arch/powerpc/platforms/pseries/setup.c | 10 +
> drivers/ide/Kconfig | 9 +
> drivers/ide/ppc/pmac.c | 125 ----------------
> drivers/macintosh/Kconfig | 12 ++
> drivers/macintosh/Makefile | 1
> drivers/macintosh/via-pmu-led.c | 144 ++++++++++++++++++
> include/asm-powerpc/cputable.h | 48 +++---
> include/asm-powerpc/iseries/it_lp_queue.h | 40 +++--
> include/asm-powerpc/kdump.h | 2
> include/asm-powerpc/kexec.h | 9 +
> include/asm-powerpc/machdep.h | 2
> include/asm-powerpc/mmu.h | 1
> include/asm-powerpc/mpc86xx.h | 1
> include/asm-powerpc/rtas.h | 3
> include/asm-powerpc/time.h | 6 +
> include/asm-powerpc/udbg.h | 3
> kernel/kexec.c | 6 -
> 56 files changed, 936 insertions(+), 858 deletions(-)
> create mode 100644 arch/powerpc/kernel/misc.S create mode
> 100644 drivers/macintosh/via-pmu-led.c
>
> Andrew Morton:
> [POWERPC] powerpc: kconfig warning fix
>
> Arnd Bergmann:
> [POWERPC] spufs: fix class0 interrupt assignment
>
> Benjamin Herrenschmidt:
> [POWERPC] spufs: map mmio space as guarded into user space
> [POWERPC] spufs: fix MFC command queue purge
>
> David Wilder:
> [POWERPC] Add the use of the firmware soft-reset-nmi to kdump.
>
> Geoff Levand:
> [POWERPC] spufs: fix memory hotplug dependency
>
> Haren Myneni:
> [POWERPC] kdump: Reserve the existing TCE mappings left
> by the first kernel
>
> Jimi Xenidis:
> [POWERPC] Don't access HID registers if running on a Hypervisor.
> [POWERPC] Skip the "copy down" of the kernel if it is
> already at zero.
>
> Johannes Berg:
> [POWERPC] Convert powermac ide blink to new led infrastructure
>
> Jon Loeliger:
> [POWERPC] Remove redundant PPC_86XX check.
> [POWERPC] Move I8259 selection under MPC8641HPCN board
> [POWERPC] Remove redundant STD_MMU selection.
> [POWERPC] Remove obsolete #include <linux/config.h>.
>
> Michael Ellerman:
> [POWERPC] Remove remaining iSeries debugger cruft
> [POWERPC] Export flat device tree via debugfs for debugging
> [POWERPC] powerpc: Initialise ppc_md htab pointers earlier
> [POWERPC] Use ppc_md.hpte_insert() in htab_bolt_mapping()
> [POWERPC] Make kexec_setup() a regular initcall
> [POWERPC] Setup the boot cpu's paca pointer in C rather than asm
> [POWERPC] Make rtas_call() safe if RTAS hasn't been initialised
> [POWERPC] Move RTAS exports next to their declarations
> [POWERPC] Setup RTAS values earlier, to enable
> rtas_call() earlier
> [POWERPC] Add udbg support for RTAS console
> [POWERPC] Enable the RTAS udbg console on IBM Cell Blade
> [POWERPC] Enable XMON in cell_defconfig
>
> Paul Mackerras:
> [POWERPC] Simplify the code defining the 64-bit CPU features
> [POWERPC] Make sure we select CONFIG_NEW_LEDS if
> ADB_PMU_LED is set
>
> Stephen Rothwell:
> [POWERPC] Clean up it_lp_queue.h
> [POWERPC] update asm-powerpc/time.h
> [POWERPC] Remove unused function call_with_mmu_off
> [POWERPC] Consolidate some of kernel/misc*.S
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev at ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
>
More information about the Linuxppc-dev
mailing list