[PATCH 8/9 v3] Document I2C_MPC option for 86xx too.

[Jon Loeliger]

The same I2C driver found on 85xx, etc., can be used for 86xx too.

Signed-off-by: Jon Loeliger <jdl at freescale.com>

---

 drivers/i2c/busses/Kconfig |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index d6d4494..fbeae82 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -252,12 +252,12 @@ config I2C_POWERMAC
 	  will be called i2c-powermac.
 
 config I2C_MPC
-	tristate "MPC107/824x/85xx/52xx"
+	tristate "MPC107/824x/85xx/52xx/86xx"
 	depends on I2C && PPC32
 	help
 	  If you say yes to this option, support will be included for the
 	  built-in I2C interface on the MPC107/Tsi107/MPC8240/MPC8245 and
-	  MPC85xx family processors. The driver may also work on 52xx
+	  MPC85xx/MPC8641 family processors. The driver may also work on 52xx
 	  family processors, though interrupts are known not to work.
 
 	  This driver can also be built as a module.  If so, the module