snd-aoa: using feature calls for GPIOs

[Johannes Berg]

On Mon, 2006-06-05 at 13:11 +1000, Benjamin Herrenschmidt wrote:

> The platform function write bit 0 of the register only afaik. Bit 0x4 is
> "output enable" so if you clear it, your GPIOs won't do much :)

Aha! Yes, I had read the code wrongly, I figured the pmfs only wrote but
in fact there's a read/mask too. Thanks :)

> Also, bit 0x2 is the input data, though it's only useful if "output
> enable" is cleared (or it will just reflect the state of the outputs).

Yeah ok, I'll change/retest the patch during the week.

Thanks,
johannes
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 793 bytes
Desc: This is a digitally signed message part
URL: <http://lists.ozlabs.org/pipermail/linuxppc-dev/attachments/20060605/657413bc/attachment.pgp>