Please pull from 'for_paulus' branch of powerpc
Kumar Gala
galak at kernel.crashing.org
Thu Jun 29 15:08:02 EST 2006
On Jun 28, 2006, at 10:33 PM, Zhang Wei-r63237 wrote:
>>
>> On Jun 28, 2006, at 1:26 AM, Zhang Wei-r63237 wrote:
>>
>>> Hi, Kumar,
>>>
>>> Why moving these codes from pci.c to mpc86xx_hpcn.c? It's
>> not must be.
>>> These functions relate to PCI device of MPC8641D HPCn platform.
>>> And we can also see the 'DECLARE_PCI_FIXUP_HEADER()' declaration in
>>> pci.c of Powermac platform.
>>
>> The point for moving is 86xx/pci.c should apply to all 86xx
>> systems, not just the HPCn system.
>>
>> - kumar
>
> The codes of moving is for PCI devices, it's for HPCn system now,
> but it's also fit for the same PCI chips in the other 86xx system
> and the same chip should keep the same setting in 86xx platforms, I
> think so.
>
> Even though other 86xx platforms have no these PCI chips, these
> codes will not take effect.
Its code bloat for systems that dont need it.
> And we can also see the similar solution in pSeries and PowerMac
> platforms pci.c file. The function 'fixup_winbond_82c105' in
> pseries/pci.c is for the Winbond 82c105 IDE controller on p610.
> (pSeries have only p610? :-D ) The function 'fixup_k2_sata' in
> powermac/pci.c is for K2-SATA. (K2-SATA chip is in all PowerMac
> machine? ;-) )
Realize, powermac and pseries describe actual full systems, not
processor families like 86xx.
> The moving will make the mpc86xx_hpcn.c more fat.
That's all relative.
- kumar
>
> Thanks,
> Zhang Wei
>
>>
>>>> -----Original Message-----
>>>> From: linuxppc-dev-bounces+wei.zhang=freescale.com at ozlabs.org
>>>> [mailto:linuxppc-dev-bounces+wei.zhang=freescale.com at ozlabs.or
>>>> g] On Behalf Of Kumar Gala
>>>> Sent: Wednesday, June 28, 2006 2:01 PM
>>>> To: Paul Mackerras
>>>> Cc: linuxppc-dev at ozlabs.org; linux-kernel at vger.kernel.org
>>>> Subject: Please pull from 'for_paulus' branch of powerpc
>>>>
>>>> Please pull from 'for_paulus' branch of
>>>> master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc.git
>>>>
>>>> to receive the following updates:
>>>>
>>>> arch/powerpc/kernel/cputable.c | 12 --
>>>> arch/powerpc/platforms/86xx/mpc86xx.h | 8 +
>>>> arch/powerpc/platforms/86xx/mpc86xx_hpcn.c | 128
>>>> +++++++++++++++++++++++++--
>>>> arch/powerpc/platforms/86xx/mpc86xx_smp.c | 9 -
>>>> arch/powerpc/platforms/86xx/pci.c | 136
>>>> +----------------------------
>>>> include/asm-powerpc/mpc86xx.h | 4
>>>> 6 files changed, 138 insertions(+), 159 deletions(-)
>>>>
>>>> Kumar Gala:
>>>> powerpc: minor cleanups for mpc86xx
>>>>
>>>> diff --git a/arch/powerpc/kernel/cputable.c
>>>> b/arch/powerpc/kernel/cputable.c index 1c11488..abf7d42 100644
>>>> --- a/arch/powerpc/kernel/cputable.c
>>>> +++ b/arch/powerpc/kernel/cputable.c
>>>> @@ -722,18 +722,6 @@ #if CLASSIC_PPC
>>>> .oprofile_type = PPC_OPROFILE_G4,
>>>> .platform = "ppc7450",
>>>> },
>>>> - { /* 8641 */
>>>> - .pvr_mask = 0xffffffff,
>>>> - .pvr_value = 0x80040010,
>>>> - .cpu_name = "8641",
>>>> - .cpu_features = CPU_FTRS_7447A,
>>>> - .cpu_user_features = COMMON_USER |
>>>> PPC_FEATURE_HAS_ALTIVEC_COMP,
>>>> - .icache_bsize = 32,
>>>> - .dcache_bsize = 32,
>>>> - .num_pmcs = 6,
>>>> - .cpu_setup = __setup_cpu_745x
>>>> - },
>>>> -
>>>> { /* 82xx (8240, 8245, 8260 are all 603e cores) */
>>>> .pvr_mask = 0x7fff0000,
>>>> .pvr_value = 0x00810000,
>>>> diff --git a/arch/powerpc/platforms/86xx/mpc86xx.h
>>>> b/arch/powerpc/platforms/86xx/mpc86xx.h
>>>> index e3c9e4f..2834462 100644
>>>> --- a/arch/powerpc/platforms/86xx/mpc86xx.h
>>>> +++ b/arch/powerpc/platforms/86xx/mpc86xx.h
>>>> @@ -15,11 +15,13 @@ #define __MPC86XX_H__
>>>> * mpc86xx_* files. Mostly for use by mpc86xx_setup().
>>>> */
>>>>
>>>> -extern int __init add_bridge(struct device_node *dev);
>>>> +extern int add_bridge(struct device_node *dev);
>>>>
>>>> -extern void __init setup_indirect_pcie(struct
>> pci_controller *hose,
>>>> +extern int mpc86xx_exclude_device(u_char bus, u_char devfn);
>>>> +
>>>> +extern void setup_indirect_pcie(struct pci_controller *hose,
>>>> u32 cfg_addr, u32
>>>> cfg_data); -extern void __init
>>>> setup_indirect_pcie_nomap(struct pci_controller *hose,
>>>> +extern void setup_indirect_pcie_nomap(struct pci_controller *hose,
>>>> void __iomem *cfg_addr,
>>>> void __iomem *cfg_data);
>>>>
>>>> diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
>>>> b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
>>>> index 483c21d..ac7f418 100644
>>>> --- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
>>>> +++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
>>>> @@ -36,6 +36,7 @@ #include <asm/mpic.h> #include
>> <sysdev/fsl_soc.h>
>>>>
>>>> #include "mpc86xx.h"
>>>> +#include "mpc8641_hpcn.h"
>>>>
>>>> #ifndef CONFIG_PCI
>>>> unsigned long isa_io_base = 0;
>>>> @@ -186,17 +187,130 @@ mpc86xx_map_irq(struct pci_dev *dev, uns
>>>> return PCI_IRQ_TABLE_LOOKUP + I8259_OFFSET; }
>>>>
>>>> +static void __devinit quirk_ali1575(struct pci_dev *dev) {
>>>> + unsigned short temp;
>>>> +
>>>> + /*
>>>> + * ALI1575 interrupts route table setup:
>>>> + *
>>>> + * IRQ pin IRQ#
>>>> + * PIRQA ---- 3
>>>> + * PIRQB ---- 4
>>>> + * PIRQC ---- 5
>>>> + * PIRQD ---- 6
>>>> + * PIRQE ---- 9
>>>> + * PIRQF ---- 10
>>>> + * PIRQG ---- 11
>>>> + * PIRQH ---- 12
>>>> + *
>>>> + * interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD
>>>> + * PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA
>>>> + */
>>>> + pci_write_config_dword(dev, 0x48, 0xb9317542);
>>>> +
>>>> + /* USB 1.1 OHCI controller 1, interrupt: PIRQE */
>>>> + pci_write_config_byte(dev, 0x86, 0x0c);
>>>> +
>>>> + /* USB 1.1 OHCI controller 2, interrupt: PIRQF */
>>>> + pci_write_config_byte(dev, 0x87, 0x0d);
>>>> +
>>>> + /* USB 1.1 OHCI controller 3, interrupt: PIRQH */
>>>> + pci_write_config_byte(dev, 0x88, 0x0f);
>>>> +
>>>> + /* USB 2.0 controller, interrupt: PIRQ7 */
>>>> + pci_write_config_byte(dev, 0x74, 0x06);
>>>> +
>>>> + /* Audio controller, interrupt: PIRQE */
>>>> + pci_write_config_byte(dev, 0x8a, 0x0c);
>>>> +
>>>> + /* Modem controller, interrupt: PIRQF */
>>>> + pci_write_config_byte(dev, 0x8b, 0x0d);
>>>> +
>>>> + /* HD audio controller, interrupt: PIRQG */
>>>> + pci_write_config_byte(dev, 0x8c, 0x0e);
>>>> +
>>>> + /* Serial ATA interrupt: PIRQD */
>>>> + pci_write_config_byte(dev, 0x8d, 0x0b);
>>>> +
>>>> + /* SMB interrupt: PIRQH */
>>>> + pci_write_config_byte(dev, 0x8e, 0x0f);
>>>> +
>>>> + /* PMU ACPI SCI interrupt: PIRQH */
>>>> + pci_write_config_byte(dev, 0x8f, 0x0f);
>>>> +
>>>> + /* Primary PATA IDE IRQ: 14
>>>> + * Secondary PATA IDE IRQ: 15
>>>> + */
>>>> + pci_write_config_byte(dev, 0x44, 0x3d);
>>>> + pci_write_config_byte(dev, 0x75, 0x0f);
>>>> +
>>>> + /* Set IRQ14 and IRQ15 to legacy IRQs */
>>>> + pci_read_config_word(dev, 0x46, &temp);
>>>> + temp |= 0xc000;
>>>> + pci_write_config_word(dev, 0x46, temp);
>>>> +
>>>> + /* Set i8259 interrupt trigger
>>>> + * IRQ 3: Level
>>>> + * IRQ 4: Level
>>>> + * IRQ 5: Level
>>>> + * IRQ 6: Level
>>>> + * IRQ 7: Level
>>>> + * IRQ 9: Level
>>>> + * IRQ 10: Level
>>>> + * IRQ 11: Level
>>>> + * IRQ 12: Level
>>>> + * IRQ 14: Edge
>>>> + * IRQ 15: Edge
>>>> + */
>>>> + outb(0xfa, 0x4d0);
>>>> + outb(0x1e, 0x4d1);
>>>> +}
>>>>
>>>> -int
>>>> -mpc86xx_exclude_device(u_char bus, u_char devfn)
>>>> +static void __devinit quirk_uli5288(struct pci_dev *dev)
>>>> {
>>>> -#if !defined(CONFIG_PCI)
>>>> - if (bus == 0 && PCI_SLOT(devfn) == 0)
>>>> - return PCIBIOS_DEVICE_NOT_FOUND;
>>>> -#endif
>>>> + unsigned char c;
>>>> +
>>>> + pci_read_config_byte(dev,0x83,&c);
>>>> + c |= 0x80;
>>>> + pci_write_config_byte(dev, 0x83, c);
>>>> +
>>>> + pci_write_config_byte(dev, 0x09, 0x01);
>>>> + pci_write_config_byte(dev, 0x0a, 0x06);
>>>> +
>>>> + pci_read_config_byte(dev,0x83,&c);
>>>> + c &= 0x7f;
>>>> + pci_write_config_byte(dev, 0x83, c);
>>>>
>>>> - return PCIBIOS_SUCCESSFUL;
>>>> + pci_read_config_byte(dev,0x84,&c);
>>>> + c |= 0x01;
>>>> + pci_write_config_byte(dev, 0x84, c);
>>>> }
>>>> +
>>>> +static void __devinit quirk_uli5229(struct pci_dev *dev) {
>>>> + unsigned short temp;
>>>> + pci_write_config_word(dev, 0x04, 0x0405);
>>>> + pci_read_config_word(dev, 0x4a, &temp);
>>>> + temp |= 0x1000;
>>>> + pci_write_config_word(dev, 0x4a, temp); }
>>>> +
>>>> +static void __devinit early_uli5249(struct pci_dev *dev) {
>>>> + unsigned char temp;
>>>> + pci_write_config_word(dev, 0x04, 0x0007);
>>>> + pci_read_config_byte(dev, 0x7c, &temp);
>>>> + pci_write_config_byte(dev, 0x7c, 0x80);
>>>> + pci_write_config_byte(dev, 0x09, 0x01);
>>>> + pci_write_config_byte(dev, 0x7c, temp);
>>>> + dev->class |= 0x1;
>>>> +}
>>>> +
>>>> +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575,
>> quirk_ali1575);
>>>> +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288,
>> quirk_uli5288);
>>>> +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229,
>> quirk_uli5229);
>>>> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249);
>>>> #endif /* CONFIG_PCI */
>>>>
>>>>
>>>> diff --git a/arch/powerpc/platforms/86xx/mpc86xx_smp.c
>>>> b/arch/powerpc/platforms/86xx/mpc86xx_smp.c
>>>> index 944ec4b..9cca3d1 100644
>>>> --- a/arch/powerpc/platforms/86xx/mpc86xx_smp.c
>>>> +++ b/arch/powerpc/platforms/86xx/mpc86xx_smp.c
>>>> @@ -34,8 +34,8 @@ extern unsigned long __secondary_hold_ac static
>>>> void __init smp_86xx_release_core(int nr) {
>>>> - void *mcm_vaddr;
>>>> - unsigned long vaddr, pcr;
>>>> + __be32 __iomem *mcm_vaddr;
>>>> + unsigned long pcr;
>>>>
>>>> if (nr < 0 || nr >= NR_CPUS)
>>>> return;
>>>> @@ -45,10 +45,9 @@ smp_86xx_release_core(int nr)
>>>> */
>>>> mcm_vaddr = ioremap(get_immrbase() + MPC86xx_MCM_OFFSET,
>>>> MPC86xx_MCM_SIZE);
>>>> - vaddr = (unsigned long)mcm_vaddr + MCM_PORT_CONFIG_OFFSET;
>>>> - pcr = in_be32((volatile unsigned *)vaddr);
>>>> + pcr = in_be32(mcm_vaddr + (MCM_PORT_CONFIG_OFFSET >> 2));
>>>> pcr |= 1 << (nr + 24);
>>>> - out_be32((volatile unsigned *)vaddr, pcr);
>>>> + out_be32(mcm_vaddr + (MCM_PORT_CONFIG_OFFSET >> 2), pcr);
>>>> }
>>>>
>>>>
>>>> diff --git a/arch/powerpc/platforms/86xx/pci.c
>>>> b/arch/powerpc/platforms/86xx/pci.c
>>>> index 5180df7..0d8b340 100644
>>>> --- a/arch/powerpc/platforms/86xx/pci.c
>>>> +++ b/arch/powerpc/platforms/86xx/pci.c
>>>> @@ -122,15 +122,12 @@ static void __init setup_pcie_atmu(struc
>>>> static void __init mpc86xx_setup_pcie(struct pci_controller *hose,
>>>> u32 pcie_offset, u32 pcie_size) {
>>>> - volatile struct ccsr_pex *pcie;
>>>> u16 cmd;
>>>> unsigned int temps;
>>>>
>>>> DBG("PCIE host controller register offset 0x%08x, size
>> 0x%08x.\n",
>>>> pcie_offset, pcie_size);
>>>>
>>>> - pcie = ioremap(pcie_offset, pcie_size);
>>>> -
>>>> early_read_config_word(hose, 0, 0, PCI_COMMAND, &cmd);
>>>> cmd |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER |
>> PCI_COMMAND_MEMORY
>>>> | PCI_COMMAND_IO;
>>>> @@ -144,6 +141,14 @@ mpc86xx_setup_pcie(struct pci_controller
>>>> early_write_config_dword(hose, 0, 0, PCI_PRIMARY_BUS, temps); }
>>>>
>>>> +int mpc86xx_exclude_device(u_char bus, u_char devfn) {
>>>> + if (bus == 0 && PCI_SLOT(devfn) == 0)
>>>> + return PCIBIOS_DEVICE_NOT_FOUND;
>>>> +
>>>> + return PCIBIOS_SUCCESSFUL;
>>>> +}
>>>> +
>>>> int __init add_bridge(struct device_node *dev) {
>>>> int len;
>>>> @@ -198,128 +203,3 @@ int __init add_bridge(struct device_node
>>>>
>>>> return 0;
>>>> }
>>>> -
>>>> -static void __devinit quirk_ali1575(struct pci_dev *dev) -{
>>>> - unsigned short temp;
>>>> -
>>>> - /*
>>>> - * ALI1575 interrupts route table setup:
>>>> - *
>>>> - * IRQ pin IRQ#
>>>> - * PIRQA ---- 3
>>>> - * PIRQB ---- 4
>>>> - * PIRQC ---- 5
>>>> - * PIRQD ---- 6
>>>> - * PIRQE ---- 9
>>>> - * PIRQF ---- 10
>>>> - * PIRQG ---- 11
>>>> - * PIRQH ---- 12
>>>> - *
>>>> - * interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD
>>>> - * PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA
>>>> - */
>>>> - pci_write_config_dword(dev, 0x48, 0xb9317542);
>>>> -
>>>> - /* USB 1.1 OHCI controller 1, interrupt: PIRQE */
>>>> - pci_write_config_byte(dev, 0x86, 0x0c);
>>>> -
>>>> - /* USB 1.1 OHCI controller 2, interrupt: PIRQF */
>>>> - pci_write_config_byte(dev, 0x87, 0x0d);
>>>> -
>>>> - /* USB 1.1 OHCI controller 3, interrupt: PIRQH */
>>>> - pci_write_config_byte(dev, 0x88, 0x0f);
>>>> -
>>>> - /* USB 2.0 controller, interrupt: PIRQ7 */
>>>> - pci_write_config_byte(dev, 0x74, 0x06);
>>>> -
>>>> - /* Audio controller, interrupt: PIRQE */
>>>> - pci_write_config_byte(dev, 0x8a, 0x0c);
>>>> -
>>>> - /* Modem controller, interrupt: PIRQF */
>>>> - pci_write_config_byte(dev, 0x8b, 0x0d);
>>>> -
>>>> - /* HD audio controller, interrupt: PIRQG */
>>>> - pci_write_config_byte(dev, 0x8c, 0x0e);
>>>> -
>>>> - /* Serial ATA interrupt: PIRQD */
>>>> - pci_write_config_byte(dev, 0x8d, 0x0b);
>>>> -
>>>> - /* SMB interrupt: PIRQH */
>>>> - pci_write_config_byte(dev, 0x8e, 0x0f);
>>>> -
>>>> - /* PMU ACPI SCI interrupt: PIRQH */
>>>> - pci_write_config_byte(dev, 0x8f, 0x0f);
>>>> -
>>>> - /* Primary PATA IDE IRQ: 14
>>>> - * Secondary PATA IDE IRQ: 15
>>>> - */
>>>> - pci_write_config_byte(dev, 0x44, 0x3d);
>>>> - pci_write_config_byte(dev, 0x75, 0x0f);
>>>> -
>>>> - /* Set IRQ14 and IRQ15 to legacy IRQs */
>>>> - pci_read_config_word(dev, 0x46, &temp);
>>>> - temp |= 0xc000;
>>>> - pci_write_config_word(dev, 0x46, temp);
>>>> -
>>>> - /* Set i8259 interrupt trigger
>>>> - * IRQ 3: Level
>>>> - * IRQ 4: Level
>>>> - * IRQ 5: Level
>>>> - * IRQ 6: Level
>>>> - * IRQ 7: Level
>>>> - * IRQ 9: Level
>>>> - * IRQ 10: Level
>>>> - * IRQ 11: Level
>>>> - * IRQ 12: Level
>>>> - * IRQ 14: Edge
>>>> - * IRQ 15: Edge
>>>> - */
>>>> - outb(0xfa, 0x4d0);
>>>> - outb(0x1e, 0x4d1);
>>>> -}
>>>> -
>>>> -static void __devinit quirk_uli5288(struct pci_dev *dev) -{
>>>> - unsigned char c;
>>>> -
>>>> - pci_read_config_byte(dev,0x83,&c);
>>>> - c |= 0x80;
>>>> - pci_write_config_byte(dev, 0x83, c);
>>>> -
>>>> - pci_write_config_byte(dev, 0x09, 0x01);
>>>> - pci_write_config_byte(dev, 0x0a, 0x06);
>>>> -
>>>> - pci_read_config_byte(dev,0x83,&c);
>>>> - c &= 0x7f;
>>>> - pci_write_config_byte(dev, 0x83, c);
>>>> -
>>>> - pci_read_config_byte(dev,0x84,&c);
>>>> - c |= 0x01;
>>>> - pci_write_config_byte(dev, 0x84, c);
>>>> -}
>>>> -
>>>> -static void __devinit quirk_uli5229(struct pci_dev *dev) -{
>>>> - unsigned short temp;
>>>> - pci_write_config_word(dev, 0x04, 0x0405);
>>>> - pci_read_config_word(dev, 0x4a, &temp);
>>>> - temp |= 0x1000;
>>>> - pci_write_config_word(dev, 0x4a, temp);
>>>> -}
>>>> -
>>>> -static void __devinit early_uli5249(struct pci_dev *dev) -{
>>>> - unsigned char temp;
>>>> - pci_write_config_word(dev, 0x04, 0x0007);
>>>> - pci_read_config_byte(dev, 0x7c, &temp);
>>>> - pci_write_config_byte(dev, 0x7c, 0x80);
>>>> - pci_write_config_byte(dev, 0x09, 0x01);
>>>> - pci_write_config_byte(dev, 0x7c, temp);
>>>> - dev->class |= 0x1;
>>>> -}
>>>> -
>>>> -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575,
>> quirk_ali1575);
>>>> -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL,
>>>> 0x5288, quirk_uli5288);
>>>> -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229,
>> quirk_uli5229);
>>>> -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL,
>>>> 0x5249, early_uli5249); diff --git
>>>> a/include/asm-powerpc/mpc86xx.h
>>>> b/include/asm-powerpc/mpc86xx.h index d0a6718..00d72a7 100644
>>>> --- a/include/asm-powerpc/mpc86xx.h
>>>> +++ b/include/asm-powerpc/mpc86xx.h
>>>> @@ -20,10 +20,6 @@ #include <asm/mmu.h>
>>>>
>>>> #ifdef CONFIG_PPC_86xx
>>>>
>>>> -#ifdef CONFIG_MPC8641_HPCN
>>>> -#include <platforms/86xx/mpc8641_hpcn.h> -#endif
>>>> -
>>>> #define _IO_BASE isa_io_base
>>>> #define _ISA_MEM_BASE isa_mem_base
>>>> #ifdef CONFIG_PCI
>>>>
>>>> _______________________________________________
>>>> Linuxppc-dev mailing list
>>>> Linuxppc-dev at ozlabs.org
>>>> https://ozlabs.org/mailman/listinfo/linuxppc-dev
>>>>
>>
More information about the Linuxppc-dev
mailing list