[PATCH] powerpc: oprofile support for POWER6
Michael Neuling
mikey at neuling.org
Wed Jun 7 11:23:54 EST 2006
POWER6 moves some of the MMCRA bits and also requires some bits to be
cleared each PMU interrupt.
Signed-off-by: Michael Neuling <mikey at neuling.org>
Acked-by: Anton Blanchard <anton at samba.org>
---
Paul: for your post 2.6.17 queue
arch/powerpc/kernel/cputable.c | 10 +++++++-
arch/powerpc/oprofile/op_model_power4.c | 37 ++++++++++++--------------------
include/asm-powerpc/cputable.h | 11 ++++++---
include/asm-powerpc/reg.h | 4 +++
4 files changed, 36 insertions(+), 26 deletions(-)
Index: linux-2.6-powerpc/arch/powerpc/kernel/cputable.c
===================================================================
--- linux-2.6-powerpc.orig/arch/powerpc/kernel/cputable.c
+++ linux-2.6-powerpc/arch/powerpc/kernel/cputable.c
@@ -236,6 +236,8 @@ struct cpu_spec cpu_specs[] = {
.num_pmcs = 6,
.oprofile_cpu_type = "ppc64/power5",
.oprofile_type = PPC_OPROFILE_POWER4,
+ .oprofile_mmcra_sihv = MMCRA_SIHV,
+ .oprofile_mmcra_sipr = MMCRA_SIPR,
.platform = "power5",
},
{ /* Power5 GS */
@@ -249,6 +251,8 @@ struct cpu_spec cpu_specs[] = {
.num_pmcs = 6,
.oprofile_cpu_type = "ppc64/power5+",
.oprofile_type = PPC_OPROFILE_POWER4,
+ .oprofile_mmcra_sihv = MMCRA_SIHV,
+ .oprofile_mmcra_sipr = MMCRA_SIPR,
.platform = "power5+",
},
{ /* Power6 */
@@ -259,9 +263,13 @@ struct cpu_spec cpu_specs[] = {
.cpu_user_features = COMMON_USER_POWER6,
.icache_bsize = 128,
.dcache_bsize = 128,
- .num_pmcs = 6,
+ .num_pmcs = 8,
.oprofile_cpu_type = "ppc64/power6",
.oprofile_type = PPC_OPROFILE_POWER4,
+ .oprofile_mmcra_sihv = POWER6_MMCRA_SIHV,
+ .oprofile_mmcra_sipr = POWER6_MMCRA_SIPR,
+ .oprofile_mmcra_clear = POWER6_MMCRA_THRM |
+ POWER6_MMCRA_OTHER,
.platform = "power6",
},
{ /* Cell Broadband Engine */
Index: linux-2.6-powerpc/arch/powerpc/oprofile/op_model_power4.c
===================================================================
--- linux-2.6-powerpc.orig/arch/powerpc/oprofile/op_model_power4.c
+++ linux-2.6-powerpc/arch/powerpc/oprofile/op_model_power4.c
@@ -24,10 +24,6 @@
static unsigned long reset_value[OP_MAX_COUNTER];
static int oprofile_running;
-static int mmcra_has_sihv;
-/* Unfortunately these bits vary between CPUs */
-static unsigned long mmcra_sihv = MMCRA_SIHV;
-static unsigned long mmcra_sipr = MMCRA_SIPR;
/* mmcr values are set in power4_reg_setup, used in power4_cpu_setup */
static u32 mmcr0_val;
@@ -41,16 +37,6 @@ static void power4_reg_setup(struct op_c
int i;
/*
- * SIHV / SIPR bits are only implemented on POWER4+ (GQ) and above.
- * However we disable it on all POWER4 until we verify it works
- * (I was seeing some strange behaviour last time I tried).
- *
- * It has been verified to work on POWER5 so we enable it there.
- */
- if (cpu_has_feature(CPU_FTR_MMCRA_SIHV))
- mmcra_has_sihv = 1;
-
- /*
* The performance counter event settings are given in the mmcr0,
* mmcr1 and mmcra values passed from the user in the
* op_system_config structure (sys variable).
@@ -202,18 +188,19 @@ static unsigned long get_pc(struct pt_re
unsigned long mmcra;
/* Cant do much about it */
- if (!mmcra_has_sihv)
+ if (!cur_cpu_spec->oprofile_mmcra_sihv)
return pc;
mmcra = mfspr(SPRN_MMCRA);
/* Were we in the hypervisor? */
- if (firmware_has_feature(FW_FEATURE_LPAR) && (mmcra & mmcra_sihv))
+ if (firmware_has_feature(FW_FEATURE_LPAR) &&
+ (mmcra & cur_cpu_spec->oprofile_mmcra_sihv))
/* function descriptor madness */
return *((unsigned long *)hypervisor_bucket);
/* We were in userspace, nothing to do */
- if (mmcra & mmcra_sipr)
+ if (mmcra & cur_cpu_spec->oprofile_mmcra_sipr)
return pc;
#ifdef CONFIG_PPC_RTAS
@@ -235,15 +222,14 @@ static unsigned long get_pc(struct pt_re
return pc;
}
-static int get_kernel(unsigned long pc)
+static int get_kernel(unsigned long pc, unsigned long mmcra)
{
int is_kernel;
- if (!mmcra_has_sihv) {
+ if (!cur_cpu_spec->oprofile_mmcra_sihv) {
is_kernel = is_kernel_addr(pc);
} else {
- unsigned long mmcra = mfspr(SPRN_MMCRA);
- is_kernel = ((mmcra & mmcra_sipr) == 0);
+ is_kernel = ((mmcra & cur_cpu_spec->oprofile_mmcra_sipr) == 0);
}
return is_kernel;
@@ -257,9 +243,12 @@ static void power4_handle_interrupt(stru
int val;
int i;
unsigned int mmcr0;
+ unsigned long mmcra;
+
+ mmcra = mfspr(SPRN_MMCRA);
pc = get_pc(regs);
- is_kernel = get_kernel(pc);
+ is_kernel = get_kernel(pc, mmcra);
/* set the PMM bit (see comment below) */
mtmsrd(mfmsr() | MSR_PMM);
@@ -287,6 +276,10 @@ static void power4_handle_interrupt(stru
*/
mmcr0 &= ~MMCR0_PMAO;
+ /* Clear the appropriate bits in the MMCRA */
+ mmcra &= ~cur_cpu_spec->oprofile_mmcra_clear;
+ mtspr(SPRN_MMCRA, mmcra);
+
/*
* now clear the freeze bit, counting will not start until we
* rfid from this exception, because only at that point will
Index: linux-2.6-powerpc/include/asm-powerpc/cputable.h
===================================================================
--- linux-2.6-powerpc.orig/include/asm-powerpc/cputable.h
+++ linux-2.6-powerpc/include/asm-powerpc/cputable.h
@@ -69,6 +69,13 @@ struct cpu_spec {
/* Processor specific oprofile operations */
enum powerpc_oprofile_type oprofile_type;
+ /* Bit locations inside the mmcra change */
+ unsigned long oprofile_mmcra_sihv;
+ unsigned long oprofile_mmcra_sipr;
+
+ /* Bits to clear during an oprofile exception */
+ unsigned long oprofile_mmcra_clear;
+
/* Name of processor class, for the ELF AT_PLATFORM entry */
char *platform;
};
@@ -117,7 +124,6 @@ extern void do_cpu_ftr_fixups(unsigned l
#define CPU_FTR_SMT ASM_CONST(0x0000010000000000)
#define CPU_FTR_COHERENT_ICACHE ASM_CONST(0x0000020000000000)
#define CPU_FTR_LOCKLESS_TLBIE ASM_CONST(0x0000040000000000)
-#define CPU_FTR_MMCRA_SIHV ASM_CONST(0x0000080000000000)
#define CPU_FTR_CI_LARGE_PAGE ASM_CONST(0x0000100000000000)
#define CPU_FTR_PAUSE_ZERO ASM_CONST(0x0000200000000000)
#define CPU_FTR_PURR ASM_CONST(0x0000400000000000)
@@ -134,7 +140,6 @@ extern void do_cpu_ftr_fixups(unsigned l
#define CPU_FTR_SMT ASM_CONST(0x0)
#define CPU_FTR_COHERENT_ICACHE ASM_CONST(0x0)
#define CPU_FTR_LOCKLESS_TLBIE ASM_CONST(0x0)
-#define CPU_FTR_MMCRA_SIHV ASM_CONST(0x0)
#define CPU_FTR_CI_LARGE_PAGE ASM_CONST(0x0)
#define CPU_FTR_PURR ASM_CONST(0x0)
#endif
@@ -320,7 +325,7 @@ extern void do_cpu_ftr_fixups(unsigned l
CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | \
CPU_FTR_MMCRA | CPU_FTR_SMT | \
CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
- CPU_FTR_MMCRA_SIHV | CPU_FTR_PURR)
+ CPU_FTR_PURR)
#define CPU_FTRS_POWER6 (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | \
CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | \
CPU_FTR_MMCRA | CPU_FTR_SMT | \
Index: linux-2.6-powerpc/include/asm-powerpc/reg.h
===================================================================
--- linux-2.6-powerpc.orig/include/asm-powerpc/reg.h
+++ linux-2.6-powerpc/include/asm-powerpc/reg.h
@@ -443,6 +443,10 @@
#define MMCRA_SIHV 0x10000000UL /* state of MSR HV when SIAR set */
#define MMCRA_SIPR 0x08000000UL /* state of MSR PR when SIAR set */
#define MMCRA_SAMPLE_ENABLE 0x00000001UL /* enable sampling */
+#define POWER6_MMCRA_SIHV 0x0000040000000000ULL
+#define POWER6_MMCRA_SIPR 0x0000020000000000ULL
+#define POWER6_MMCRA_THRM 0x00000020UL
+#define POWER6_MMCRA_OTHER 0x0000000EUL
#define SPRN_PMC1 787
#define SPRN_PMC2 788
#define SPRN_PMC3 789
More information about the Linuxppc-dev
mailing list