[PATCH] [2.6.18] U4 DART improvements
Olof Johansson
olof at lixom.net
Fri Jun 2 14:04:26 EST 2006
Hi Paul,
I've given this a good beating tonight, since I finally got a pci-e
ethernet card for the new g5 to do loopback with. Profiles looked good,
I think we're good to go for 2.6.18 with this, especially if it gets
in early for extra testing.
-Olof
---
Implement single-entry TLB invalidations in the U4 DART.
Simple benchmarking with loopback flood pings of various sizes show that
the previous flush-all code will spend ~5% of the time in flush, while
the new selective invalidations will spend about an order of magnitude
less in the same code path.
This could possibly mean that invalidations larger than, say, 16
entries would better be handled in bulk, but until we have a workload
that actually shows problems or bottlenecks let's keep doing single
invalidations at all mapping sizes.
Signed-off-by: Olof Johansson <olof at lixom.net>
diff --git a/arch/powerpc/sysdev/dart.h b/arch/powerpc/sysdev/dart.h
index c2d0576..1c8817c 100644
Index: 2.6.17-rc5-git8/arch/powerpc/sysdev/dart.h
===================================================================
--- 2.6.17-rc5-git8.orig/arch/powerpc/sysdev/dart.h
+++ 2.6.17-rc5-git8/arch/powerpc/sysdev/dart.h
@@ -47,8 +47,12 @@
/* U4 registers */
#define DART_BASE_U4_BASE_MASK 0xffffff
#define DART_BASE_U4_BASE_SHIFT 0
-#define DART_CNTL_U4_FLUSHTLB 0x20000000
#define DART_CNTL_U4_ENABLE 0x80000000
+#define DART_CNTL_U4_IONE 0x40000000
+#define DART_CNTL_U4_FLUSHTLB 0x20000000
+#define DART_CNTL_U4_IDLE 0x10000000
+#define DART_CNTL_U4_PAR_EN 0x08000000
+#define DART_CNTL_U4_IONE_MASK 0x07ffffff
#define DART_SIZE_U4_SIZE_MASK 0x1fff
#define DART_SIZE_U4_SIZE_SHIFT 0
Index: 2.6.17-rc5-git8/arch/powerpc/sysdev/dart_iommu.c
===================================================================
--- 2.6.17-rc5-git8.orig/arch/powerpc/sysdev/dart_iommu.c
+++ 2.6.17-rc5-git8/arch/powerpc/sysdev/dart_iommu.c
@@ -101,8 +101,8 @@ retry:
if (l == (1L << limit)) {
if (limit < 4) {
limit++;
- reg = DART_IN(DART_CNTL);
- reg &= ~inv_bit;
+ reg = DART_IN(DART_CNTL);
+ reg &= ~inv_bit;
DART_OUT(DART_CNTL, reg);
goto retry;
} else
@@ -111,11 +111,40 @@ retry:
}
}
+static inline void dart_tlb_invalidate_one(unsigned long bus_rpn)
+{
+ unsigned int reg;
+ unsigned int l, limit;
+
+ reg = DART_CNTL_U4_ENABLE | DART_CNTL_U4_IONE |
+ (bus_rpn & DART_CNTL_U4_IONE_MASK);
+ DART_OUT(DART_CNTL, reg);
+ mb();
+
+ limit = 0;
+wait_more:
+ l = 0;
+ while ((DART_IN(DART_CNTL) & DART_CNTL_U4_IONE) && l < (1L << limit)) {
+ rmb();
+ l++;
+ }
+
+ if (l == (1L << limit)) {
+ if (limit < 4) {
+ limit++;
+ goto wait_more;
+ } else
+ panic("DART: TLB did not flush after waiting a long "
+ "time. Buggy U4 ?");
+ }
+}
+
static void dart_flush(struct iommu_table *tbl)
{
- if (dart_dirty)
+ if (dart_dirty) {
dart_tlb_invalidate_all();
- dart_dirty = 0;
+ dart_dirty = 0;
+ }
}
static void dart_build(struct iommu_table *tbl, long index,
@@ -124,6 +153,7 @@ static void dart_build(struct iommu_tabl
{
unsigned int *dp;
unsigned int rpn;
+ long l;
DBG("dart: build at: %lx, %lx, addr: %x\n", index, npages, uaddr);
@@ -135,7 +165,8 @@ static void dart_build(struct iommu_tabl
/* On U3, all memory is contigous, so we can move this
* out of the loop.
*/
- while (npages--) {
+ l = npages;
+ while (l--) {
rpn = virt_to_abs(uaddr) >> DART_PAGE_SHIFT;
*(dp++) = DARTMAP_VALID | (rpn & DARTMAP_RPNMASK);
@@ -143,7 +174,14 @@ static void dart_build(struct iommu_tabl
uaddr += DART_PAGE_SIZE;
}
- dart_dirty = 1;
+ if (dart_is_u4) {
+ rpn = index;
+ mb(); /* make sure all updates have reached memory */
+ while (npages--)
+ dart_tlb_invalidate_one(rpn++);
+ } else {
+ dart_dirty = 1;
+ }
}
More information about the Linuxppc-dev
mailing list