[PATCH 3/10] Add MPC8641 HPCN PCI and PCI-Express files.
Jon Loeliger
jdl at freescale.com
Thu Jun 8 08:37:04 EST 2006
Signed-off-by: Xianghua Xiao <x.xiao at freescale.com>
Signed-off-by: Wei Zhang <Wei.Zhang at freescale.com>
Signed-off-by: Haiying Wang <Haiying.Wang at freescale.com>
Signed-off-by: Jon Loeliger <jdl at freescale.com>
---
arch/powerpc/platforms/86xx/pci.c | 213 +++++++++++++++++++++++++++++++++++++
arch/powerpc/platforms/86xx/pex.c | 173 ++++++++++++++++++++++++++++++
2 files changed, 386 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/platforms/86xx/pci.c b/arch/powerpc/platforms/86xx/pci.c
new file mode 100644
index 0000000..eff6f28
--- /dev/null
+++ b/arch/powerpc/platforms/86xx/pci.c
@@ -0,0 +1,213 @@
+/*
+ * MPC86XX pci setup code
+ *
+ * Recode: ZHANG WEI <wei.zhang at freescale.com>
+ * Initial author: Xianghua Xiao <x.xiao at freescale.com>
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/serial.h>
+
+#include <asm/system.h>
+#include <asm/atomic.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/immap_86xx.h>
+#include <asm/pci-bridge.h>
+#include <sysdev/fsl_soc.h>
+
+#include "mpc86xx.h"
+
+
+#ifdef CONFIG_PEX
+static void __init
+mpc86xx_setup_pex(struct pci_controller *hose)
+{
+ volatile struct ccsr_pex *pex;
+ u16 cmd;
+ unsigned int temps;
+ phys_addr_t immr;
+
+ immr = get_immrbase();
+
+ pex = ioremap(immr + MPC86xx_PEX_OFFSET, MPC86xx_PEX_SIZE);
+
+ early_read_config_word(hose, 0, 0, PCI_COMMAND, &cmd);
+ cmd |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY
+ | PCI_COMMAND_IO;
+ early_write_config_word(hose, 0, 0, PCI_COMMAND, cmd);
+
+ early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80);
+
+ /* PEX Bus, Fix the MPC8641D host bridge's location to bus 0xFF. */
+ early_read_config_dword(hose, 0, 0, PCI_PRIMARY_BUS, &temps);
+ temps = (temps & 0xff000000) | (0xff) | (0x0 << 8) | (0xfe << 16);
+ early_write_config_dword(hose, 0, 0, PCI_PRIMARY_BUS, temps);
+
+ /* Disable all windows (except pexowar0 since its ignored) */
+ pex->pexowar1 = 0;
+ pex->pexowar2 = 0;
+ pex->pexowar3 = 0;
+ pex->pexowar4 = 0;
+ pex->pexiwar1 = 0;
+ pex->pexiwar2 = 0;
+ pex->pexiwar3 = 0;
+
+ /* Setup Phys:PEX 1:1 outbound mem window @ MPC86XX_PEX_LOWER_MEM */
+ pex->pexotar1 = (MPC86XX_PEX_LOWER_MEM >> 12) & 0x000fffff;
+ pex->pexotear1 = 0x00000000;
+ pex->pexowbar1 = (MPC86XX_PEX_LOWER_MEM >> 12) & 0x000fffff;
+ /* Enable, Mem R/W */
+ pex->pexowar1 = 0x80044000 |
+ (__ilog2(MPC86XX_PEX_UPPER_MEM - MPC86XX_PEX_LOWER_MEM + 1) - 1);
+
+ /* Setup outboud IO windows @ MPC86XX_PEX_IO_BASE */
+ pex->pexotar2 = (MPC86XX_PEX_LOWER_IO >> 12) & 0x000fffff;
+ pex->pexotear2 = 0x00000000;
+ pex->pexowbar2 = (MPC86XX_PEX_IO_BASE >> 12) & 0x000fffff;
+ /* Enable, IO R/W */
+ pex->pexowar2 = 0x80088000 | (__ilog2(MPC86XX_PEX_IO_SIZE) - 1);
+
+ /* Setup 2G inbound Memory Window @ 0 */
+ pex->pexitar1 = 0x00000000;
+ pex->pexiwbar1 = 0x00000000;
+ /* Enable, Prefetch, Local Mem, Snoop R/W, 2G */
+ pex->pexiwar1 = 0xa0f5501e;
+}
+
+int __init add_bridge(struct device_node *dev)
+{
+ int len;
+ struct pci_controller *hose;
+ struct resource rsrc;
+ int *bus_range;
+ int has_address = 0;
+
+ pr_debug("Adding PEX host bridge %s\n", dev->full_name);
+
+ /* Fetch host bridge registers address */
+ has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
+
+ /* Get bus range if any */
+ bus_range = (int *) get_property(dev, "bus-range", &len);
+ if (bus_range == NULL || len < 2 * sizeof(int))
+ printk(KERN_WARNING "Can't get bus-range for %s, assume"
+ " bus 0\n", dev->full_name);
+
+ hose = pcibios_alloc_controller();
+ if (!hose)
+ return -ENOMEM;
+ hose->arch_data = dev;
+ hose->set_cfg_type = 1;
+
+ /* last_busno = 0xfe cause by PEX bug */
+ hose->first_busno = bus_range ? bus_range[0] : 0x0;
+ hose->last_busno = bus_range ? bus_range[1] : 0xfe;
+
+ setup_indirect_pex(hose, rsrc.start, rsrc.start + 0x4);
+
+ /* Setup the first PEX controller. */
+ if ((rsrc.start & 0xfffff) == 0x8000)
+ mpc86xx_setup_pex(hose);
+
+ printk(KERN_INFO "Found MPC86xx PEX host bridge at 0x%08lx. "
+ "Firmware bus number: %d->%d\n",
+ rsrc.start, hose->first_busno, hose->last_busno);
+
+ pr_debug(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
+ hose, hose->cfg_addr, hose->cfg_data);
+
+ /* Interpret the "ranges" property */
+ /* This also maps the I/O region and sets isa_io/mem_base */
+ pci_process_bridge_OF_ranges(hose, dev, 1);
+
+ return 0;
+}
+#endif /* CONFIG_PEX */
+
+static void __devinit quirk_ali1575(struct pci_dev *dev)
+{
+ /*
+ * ALI1575 interrupts route table setup:
+ *
+ * IRQ pin IRQ#
+ * PIRQA ---- 3
+ * PIRQB ---- 4
+ * PIRQC ---- 5
+ * PIRQD ---- 6
+ * PIRQE ---- 9
+ * PIRQF ---- 10
+ * PIRQG ---- 11
+ * PIRQH ---- 12
+ *
+ * interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD
+ * PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA
+ */
+ pci_write_config_dword(dev, 0x48, 0xb9317542);
+
+ /* USB 1.1 OHCI controller 1, interrupt: PIRQE */
+ pci_write_config_byte(dev, 0x86, 0x0c);
+
+ /* USB 1.1 OHCI controller 2, interrupt: PIRQF */
+ pci_write_config_byte(dev, 0x87, 0x0d);
+
+ /* USB 1.1 OHCI controller 3, interrupt: PIRQH */
+ pci_write_config_byte(dev, 0x88, 0x0f);
+
+ /* USB 2.0 controller, interrupt: PIRQ7 */
+ pci_write_config_byte(dev, 0x74, 0x06);
+
+ /* Audio controller, interrupt: PIRQE */
+ pci_write_config_byte(dev, 0x8a, 0x0c);
+
+ /* Modem controller, interrupt: PIRQF */
+ pci_write_config_byte(dev, 0x8b, 0x0d);
+
+ /* HD audio controller, interrupt: PIRQG */
+ pci_write_config_byte(dev, 0x8c, 0x0e);
+
+ /* Serial ATA interrupt: PIRQD */
+ pci_write_config_byte(dev, 0x8d, 0x0b);
+
+ /* SMB interrupt: PIRQH */
+ pci_write_config_byte(dev, 0x8e, 0x0f);
+
+ /* PMU ACPI SCI interrupt: PIRQH */
+ pci_write_config_byte(dev, 0x8f, 0x0f);
+
+}
+
+static void __devinit quirk_uli5288(struct pci_dev *dev)
+{
+ unsigned char c;
+
+ pci_read_config_byte(dev,0x83,&c);
+ c |= 0x80;
+ pci_write_config_byte(dev, 0x83, c);
+
+ pci_write_config_byte(dev, 0x09, 0x01);
+ pci_write_config_byte(dev, 0x0a, 0x06);
+
+ pci_read_config_byte(dev,0x83,&c);
+ c &= 0x7f;
+ pci_write_config_byte(dev, 0x83, c);
+
+ pci_read_config_byte(dev,0x84,&c);
+ c |= 0x01;
+ pci_write_config_byte(dev, 0x84, c);
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_ali1575);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288);
+
diff --git a/arch/powerpc/platforms/86xx/pex.c b/arch/powerpc/platforms/86xx/pex.c
new file mode 100644
index 0000000..2624d3c
--- /dev/null
+++ b/arch/powerpc/platforms/86xx/pex.c
@@ -0,0 +1,173 @@
+/*
+ * Support for indirect PCI bridges.
+ *
+ * Copyright (C) 1998 Gabriel Paubert.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * "Temporary" MPC8548 Errata file -
+ * The standard indirect_pci code should work with future silicon versions.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+
+#include "mpc86xx.h"
+
+#define PCI_CFG_OUT out_be32
+
+/* ERRATA PCI-Ex 14 PEX Controller timeout */
+#define PEX_FIX out_be32(hose->cfg_addr+0x4, 0x0400ffff)
+
+
+static int
+indirect_read_config_pex(struct pci_bus *bus, unsigned int devfn, int offset,
+ int len, u32 *val)
+{
+ struct pci_controller *hose = bus->sysdata;
+ volatile void __iomem *cfg_data;
+ u32 temp;
+
+ if (ppc_md.pci_exclude_device)
+ if (ppc_md.pci_exclude_device(bus->number, devfn))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ /* Possible artifact of CDCpp50937 needs further investigation */
+ if (devfn != 0x0 && bus->number == 0xff)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ PEX_FIX;
+ if (bus->number == 0xff) {
+ PCI_CFG_OUT(hose->cfg_addr,
+ (0x80000000 | ((offset & 0xf00) << 16) |
+ ((bus->number - hose->bus_offset) << 16)
+ | (devfn << 8) | ((offset & 0xfc) )));
+ } else {
+ PCI_CFG_OUT(hose->cfg_addr,
+ (0x80000001 | ((offset & 0xf00) << 16) |
+ ((bus->number - hose->bus_offset) << 16)
+ | (devfn << 8) | ((offset & 0xfc) )));
+ }
+
+ /*
+ * Note: the caller has already checked that offset is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+ /* ERRATA PCI-Ex 12 - Configuration Address/Data Alignment */
+ cfg_data = hose->cfg_data;
+ PEX_FIX;
+ temp = in_le32(cfg_data);
+ switch (len) {
+ case 1:
+ *val = (temp >> (((offset & 3))*8)) & 0xff;
+ break;
+ case 2:
+ *val = (temp >> (((offset & 3))*8)) & 0xffff;
+ break;
+ default:
+ *val = temp;
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int
+indirect_write_config_pex(struct pci_bus *bus, unsigned int devfn, int offset,
+ int len, u32 val)
+{
+ struct pci_controller *hose = bus->sysdata;
+ volatile void __iomem *cfg_data;
+ u32 temp;
+
+ if (ppc_md.pci_exclude_device)
+ if (ppc_md.pci_exclude_device(bus->number, devfn))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ /* Possible artifact of CDCpp50937 needs further investigation */
+ if (devfn != 0x0 && bus->number == 0xff)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ PEX_FIX;
+ if (bus->number == 0xff) {
+ PCI_CFG_OUT(hose->cfg_addr,
+ (0x80000000 | ((offset & 0xf00) << 16) |
+ ((bus->number - hose->bus_offset) << 16)
+ | (devfn << 8) | ((offset & 0xfc) )));
+ } else {
+ PCI_CFG_OUT(hose->cfg_addr,
+ (0x80000001 | ((offset & 0xf00) << 16) |
+ ((bus->number - hose->bus_offset) << 16)
+ | (devfn << 8) | ((offset & 0xfc) )));
+ }
+
+ /*
+ * Note: the caller has already checked that offset is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+ /* ERRATA PCI-Ex 12 - Configuration Address/Data Alignment */
+ cfg_data = hose->cfg_data;
+ switch (len) {
+ case 1:
+ PEX_FIX;
+ temp = in_le32(cfg_data);
+ temp = (temp & ~(0xff << ((offset & 3) * 8))) |
+ (val << ((offset & 3) * 8));
+ PEX_FIX;
+ out_le32(cfg_data, temp);
+ break;
+ case 2:
+ PEX_FIX;
+ temp = in_le32(cfg_data);
+ temp = (temp & ~(0xffff << ((offset & 3) * 8)));
+ temp |= (val << ((offset & 3) * 8)) ;
+ PEX_FIX;
+ out_le32(cfg_data, temp);
+ break;
+ default:
+ PEX_FIX;
+ out_le32(cfg_data, val);
+ break;
+ }
+ PEX_FIX;
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops indirect_pex_ops = {
+ indirect_read_config_pex,
+ indirect_write_config_pex
+};
+
+void __init
+setup_indirect_pex_nomap(struct pci_controller* hose, void __iomem * cfg_addr,
+ void __iomem * cfg_data)
+{
+ hose->cfg_addr = cfg_addr;
+ hose->cfg_data = cfg_data;
+ hose->ops = &indirect_pex_ops;
+}
+
+void __init
+setup_indirect_pex(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data)
+{
+ unsigned long base = cfg_addr & PAGE_MASK;
+ void __iomem *mbase, *addr, *data;
+
+ mbase = ioremap(base, PAGE_SIZE);
+ addr = mbase + (cfg_addr & ~PAGE_MASK);
+ if ((cfg_data & PAGE_MASK) != base)
+ mbase = ioremap(cfg_data & PAGE_MASK, PAGE_SIZE);
+ data = mbase + (cfg_data & ~PAGE_MASK);
+ setup_indirect_pex_nomap(hose, addr, data);
+}
More information about the Linuxppc-dev
mailing list