[FYI] dts file for MPC8360EPB support
Li Yang-r58472
LeoLi at freescale.com
Fri Jun 30 13:40:32 EST 2006
Here is the dts file to work with the platform support patch I just posted.
---
/*
* MPC8360E PB Device Tree Source
*
* Copyright 2006 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/*
/memreserve/ 00000000 1000000;
*/
/ {
model = "MPC8360EPB";
compatible = "MPC83xx";
#address-cells = <1>;
#size-cells = <1>;
linux,phandle = <100>;
cpus {
#cpus = <1>;
#address-cells = <1>;
#size-cells = <0>;
linux,phandle = <200>;
PowerPC,8360 at 0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <20>; // 32 bytes
i-cache-line-size = <20>; // 32 bytes
d-cache-size = <8000>; // L1, 32K
i-cache-size = <8000>; // L1, 32K
timebase-frequency = <3EF1480>;
bus-frequency = <FBC5200>;
clock-frequency = <1F78A400>;
32-bit;
linux,phandle = <201>;
linux,boot-cpu;
};
};
memory {
device_type = "memory";
linux,phandle = <300>;
reg = <00000000 10000000>;
};
soc8360 at e0000000 {
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <2>;
device_type = "soc";
ranges = <0 e0000000 00100000>;
reg = <e0000000 00000200>;
bus-frequency = <FBC5200>;
wdt at 200 {
device_type = "watchdog";
compatible = "mpc83xx_wdt";
reg = <200 100>;
};
i2c at 3000 {
device_type = "i2c";
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <e 0>;
interrupt-parent = <700>;
dfsrr;
};
i2c at 3100 {
device_type = "i2c";
compatible = "fsl-i2c";
reg = <3100 100>;
interrupts = <f 0>;
interrupt-parent = <700>;
dfsrr;
};
serial at 4500 {
device_type = "serial";
compatible = "ns16550";
reg = <4500 100>;
clock-frequency = <FBC5200>;
interrupts = <9 0>;
interrupt-parent = <700>;
};
serial at 4600 {
device_type = "serial";
compatible = "ns16550";
reg = <4600 100>;
clock-frequency = <FBC5200>;
interrupts = <a 0>;
interrupt-parent = <700>;
};
crypto at 30000 {
device_type = "crypto";
model = "SEC2";
compatible = "talitos";
reg = <30000 10000>;
interrupts = <b 0>;
interrupt-parent = <700>;
num-channels = <4>;
channel-fifo-len = <18>;
exec-units-mask = <0000007e>;
/* desc mask is for rev1.x, we need runtime fixup for >=2.x */
descriptor-types-mask = <01010ebf>;
};
pci at 8500 {
linux,phandle = <8500>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x11 AD17 */
8800 0 0 1 700 14 0
8800 0 0 2 700 15 0
8800 0 0 3 700 16 0
8800 0 0 4 700 17 0
/* IDSEL 0x12 AD18 */
9000 0 0 1 700 16 0
9000 0 0 2 700 17 0
9000 0 0 3 700 14 0
9000 0 0 4 700 15 0
/* IDSEL 0x13 AD19 */
9800 0 0 1 700 17 0
9800 0 0 2 700 14 0
9800 0 0 3 700 15 0
9800 0 0 4 700 16 0
/* IDSEL 0x15 AD21*/
a800 0 0 1 700 14 0
a800 0 0 2 700 15 0
a800 0 0 3 700 16 0
a800 0 0 4 700 17 0
/* IDSEL 0x16 AD22*/
b000 0 0 1 700 17 0
b000 0 0 2 700 14 0
b000 0 0 3 700 15 0
b000 0 0 4 700 16 0
/* IDSEL 0x17 AD23*/
b800 0 0 1 700 16 0
b800 0 0 2 700 17 0
b800 0 0 3 700 14 0
b800 0 0 4 700 15 0
/* IDSEL 0x18 AD24*/
c000 0 0 1 700 15 0
c000 0 0 2 700 16 0
c000 0 0 3 700 17 0
c000 0 0 4 700 14 0>;
interrupt-parent = <700>;
interrupts = <42 0>;
bus-range = <0 0>;
ranges = <02000000 0 a0000000 a0000000 0 10000000
42000000 0 80000000 80000000 0 10000000
01000000 0 00000000 e2000000 0 00100000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <8500 100>;
compatible = "83xx";
device_type = "pci";
};
// IPIC
pic at 700 {
linux,phandle = <700>;
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <700 100>;
built-in;
device_type = "ipic";
};
par_io at 1400 {
reg = <1400 100>;
device_type = "par_io";
ucc_pin at 01 {
linux,phandle = <140001>;
pio-map = <
/* port pin dir open_drain assignment has_irq */
0 3 1 0 1 0 /* TxD0 */
0 4 1 0 1 0 /* TxD1 */
0 5 1 0 1 0 /* TxD2 */
0 6 1 0 1 0 /* TxD3 */
1 6 1 0 3 0 /* TxD4 */
1 7 1 0 1 0 /* TxD5 */
1 9 1 0 2 0 /* TxD6 */
1 a 1 0 2 0 /* TxD7 */
0 9 2 0 1 0 /* RxD0 */
0 a 2 0 1 0 /* RxD1 */
0 b 2 0 1 0 /* RxD2 */
0 c 2 0 1 0 /* RxD3 */
0 d 2 0 1 0 /* RxD4 */
1 1 2 0 2 0 /* RxD5 */
1 0 2 0 2 0 /* RxD6 */
1 4 2 0 2 0 /* RxD7 */
0 7 1 0 1 0 /* TX_EN */
0 8 1 0 1 0 /* TX_ER */
0 f 2 0 1 0 /* RX_DV */
0 10 2 0 1 0 /* RX_ER */
0 0 2 0 1 0 /* RX_CLK */
2 9 1 0 3 0 /* GTX_CLK - CLK10 */
2 8 2 0 1 0>; /* GTX125 - CLK9 */
};
ucc_pin at 02 {
linux,phandle = <140002>;
pio-map = <
/* port pin dir open_drain assignment has_irq */
0 11 1 0 1 0 /* TxD0 */
0 12 1 0 1 0 /* TxD1 */
0 13 1 0 1 0 /* TxD2 */
0 14 1 0 1 0 /* TxD3 */
1 2 1 0 1 0 /* TxD4 */
1 3 1 0 2 0 /* TxD5 */
1 5 1 0 3 0 /* TxD6 */
1 8 1 0 3 0 /* TxD7 */
0 17 2 0 1 0 /* RxD0 */
0 18 2 0 1 0 /* RxD1 */
0 19 2 0 1 0 /* RxD2 */
0 1a 2 0 1 0 /* RxD3 */
0 1b 2 0 1 0 /* RxD4 */
1 c 2 0 2 0 /* RxD5 */
1 d 2 0 3 0 /* RxD6 */
1 b 2 0 2 0 /* RxD7 */
0 15 1 0 1 0 /* TX_EN */
0 16 1 0 1 0 /* TX_ER */
0 1d 2 0 1 0 /* RX_DV */
0 1e 2 0 1 0 /* RX_ER */
0 1f 2 0 1 0 /* RX_CLK */
2 2 1 0 2 0 /* GTX_CLK - CLK10 */
2 3 2 0 1 0 /* GTX125 - CLK4 */
0 1 3 0 2 0 /* MDIO */
0 2 1 0 1 0>; /* MDC */
};
};
};
// QE
qe at e0100000 {
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <2>;
device_type = "qe";
model = "QE";
ranges = <0 e0100000 00100000>;
reg = <e0100000 480>;
brg-frequency = <0>;
bus-frequency = <179A7B00>;
spi at 4c0 {
device_type = "spi";
compatible = "fsl_spi";
reg = <4c0 40>;
interrupts = <82 0>;
interrupt-parent = <700>;
mode = "cpu";
};
spi at 500 {
device_type = "spi";
compatible = "fsl_spi";
reg = <500 40>;
interrupts = <81 0>;
interrupt-parent = <700>;
mode = "cpu";
};
brg at 640 {
device_type = "brg";
reg = <668 4>;
};
usb at 6c0 {
device_type = "usb";
compatible = "qe_udc";
reg = <6c0 40>;
reg_pram = <8B00 100>;
interrupts = <8b 0>;
interrupt-parent = <700>;
mode = "slave";
};
ucc at 2000 {
device_type = "network";
compatible = "ucc_geth";
model = "UCC";
device-id = <1>;
reg = <2000 200 8400 100>;
interrupts = <a0 0>;
interrupt-parent = <700>;
mac-address = [ 00 04 9f 00 23 23 ];
rx-clock = <0>;
tx-clock = <19>;
phy-handle = <212000>;
pio-handle = <140001>;
};
ucc at 3000 {
device_type = "network";
compatible = "ucc_geth";
model = "UCC";
device-id = <2>;
reg = <3000 200 8500 100>;
interrupts = <a1 0>;
interrupt-parent = <700>;
mac-address = [ 00 11 22 33 44 55 ];
rx-clock = <0>;
tx-clock = <14>;
phy-handle = <212001>;
pio-handle = <140002>;
};
mdio at 2120 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2120 18>;
device_type = "mdio";
compatible = "ucc_geth_phy";
ethernet-phy at 00 {
linux,phandle = <212000>;
interrupt-parent = <700>;
interrupts = <11 1>;
reg = <0>;
device_type = "ethernet-phy";
interface = <6>; //ENET_1000_GMII
};
ethernet-phy at 01 {
linux,phandle = <212001>;
interrupt-parent = <700>;
interrupts = <12 1>;
reg = <1>;
device_type = "ethernet-phy";
interface = <6>;
};
};
};
};
--
Leo Li
Freescale Semiconductor
LeoLi at freescale.com
More information about the Linuxppc-dev
mailing list