[PATCH 2/5] Have Power use add_active_range() and free_area_init_nodes()
Mel Gorman
mel at csn.ul.ie
Tue Jun 6 23:47:50 EST 2006
Size zones and holes in an architecture independent manner for Power.
powerpc/Kconfig | 7 --
powerpc/mm/mem.c | 53 ++++++----------
powerpc/mm/numa.c | 157 ++++---------------------------------------------
ppc/Kconfig | 3
ppc/mm/init.c | 26 ++++----
5 files changed, 56 insertions(+), 190 deletions(-)
Signed-off-by: Mel Gorman <mel at csn.ul.ie>
diff -rup -X /usr/src/patchset-0.6/bin//dontdiff linux-2.6.17-rc5-mm3-101-add_free_area_init_nodes/arch/powerpc/Kconfig linux-2.6.17-rc5-mm3-102-powerpc_use_init_nodes/arch/powerpc/Kconfig
--- linux-2.6.17-rc5-mm3-101-add_free_area_init_nodes/arch/powerpc/Kconfig 2006-06-05 14:12:48.000000000 +0100
+++ linux-2.6.17-rc5-mm3-102-powerpc_use_init_nodes/arch/powerpc/Kconfig 2006-06-05 14:15:06.000000000 +0100
@@ -692,11 +692,10 @@ config ARCH_SPARSEMEM_DEFAULT
def_bool y
depends on SMP && PPC_PSERIES
-source "mm/Kconfig"
-
-config HAVE_ARCH_EARLY_PFN_TO_NID
+config ARCH_POPULATES_NODE_MAP
def_bool y
- depends on NEED_MULTIPLE_NODES
+
+source "mm/Kconfig"
config ARCH_MEMORY_PROBE
def_bool y
diff -rup -X /usr/src/patchset-0.6/bin//dontdiff linux-2.6.17-rc5-mm3-101-add_free_area_init_nodes/arch/powerpc/mm/mem.c linux-2.6.17-rc5-mm3-102-powerpc_use_init_nodes/arch/powerpc/mm/mem.c
--- linux-2.6.17-rc5-mm3-101-add_free_area_init_nodes/arch/powerpc/mm/mem.c 2006-06-05 14:12:48.000000000 +0100
+++ linux-2.6.17-rc5-mm3-102-powerpc_use_init_nodes/arch/powerpc/mm/mem.c 2006-06-05 14:15:06.000000000 +0100
@@ -257,20 +257,22 @@ void __init do_init_bootmem(void)
boot_mapsize = init_bootmem(start >> PAGE_SHIFT, total_pages);
+ /* Add active regions with valid PFNs */
+ for (i = 0; i < lmb.memory.cnt; i++) {
+ unsigned long start_pfn, end_pfn;
+ start_pfn = lmb.memory.region[i].base >> PAGE_SHIFT;
+ end_pfn = start_pfn + lmb_size_pages(&lmb.memory, i);
+ add_active_range(0, start_pfn, end_pfn);
+ }
+
/* Add all physical memory to the bootmem map, mark each area
* present.
*/
- for (i = 0; i < lmb.memory.cnt; i++) {
- unsigned long base = lmb.memory.region[i].base;
- unsigned long size = lmb_size_bytes(&lmb.memory, i);
#ifdef CONFIG_HIGHMEM
- if (base >= total_lowmem)
- continue;
- if (base + size > total_lowmem)
- size = total_lowmem - base;
+ free_bootmem_with_active_regions(0, total_lowmem >> PAGE_SHIFT);
+#else
+ free_bootmem_with_active_regions(0, max_pfn);
#endif
- free_bootmem(base, size);
- }
/* reserve the sections we're already using */
for (i = 0; i < lmb.reserved.cnt; i++)
@@ -278,9 +280,8 @@ void __init do_init_bootmem(void)
lmb_size_bytes(&lmb.reserved, i));
/* XXX need to clip this if using highmem? */
- for (i = 0; i < lmb.memory.cnt; i++)
- memory_present(0, lmb_start_pfn(&lmb.memory, i),
- lmb_end_pfn(&lmb.memory, i));
+ sparse_memory_present_with_active_regions(0);
+
init_bootmem_done = 1;
}
@@ -289,8 +290,6 @@ void __init do_init_bootmem(void)
*/
void __init paging_init(void)
{
- unsigned long zones_size[MAX_NR_ZONES];
- unsigned long zholes_size[MAX_NR_ZONES];
unsigned long total_ram = lmb_phys_mem_size();
unsigned long top_of_ram = lmb_end_of_DRAM();
@@ -308,26 +307,18 @@ void __init paging_init(void)
top_of_ram, total_ram);
printk(KERN_DEBUG "Memory hole size: %ldMB\n",
(top_of_ram - total_ram) >> 20);
- /*
- * All pages are DMA-able so we put them all in the DMA zone.
- */
- memset(zones_size, 0, sizeof(zones_size));
- memset(zholes_size, 0, sizeof(zholes_size));
-
- zones_size[ZONE_DMA] = top_of_ram >> PAGE_SHIFT;
- zholes_size[ZONE_DMA] = (top_of_ram - total_ram) >> PAGE_SHIFT;
-
#ifdef CONFIG_HIGHMEM
- zones_size[ZONE_DMA] = total_lowmem >> PAGE_SHIFT;
- zones_size[ZONE_HIGHMEM] = (total_memory - total_lowmem) >> PAGE_SHIFT;
- zholes_size[ZONE_HIGHMEM] = (top_of_ram - total_ram) >> PAGE_SHIFT;
+ free_area_init_nodes(total_lowmem >> PAGE_SHIFT,
+ total_lowmem >> PAGE_SHIFT,
+ total_lowmem >> PAGE_SHIFT,
+ top_of_ram >> PAGE_SHIFT);
#else
- zones_size[ZONE_DMA] = top_of_ram >> PAGE_SHIFT;
- zholes_size[ZONE_DMA] = (top_of_ram - total_ram) >> PAGE_SHIFT;
-#endif /* CONFIG_HIGHMEM */
+ free_area_init_nodes(top_of_ram >> PAGE_SHIFT,
+ top_of_ram >> PAGE_SHIFT,
+ top_of_ram >> PAGE_SHIFT,
+ top_of_ram >> PAGE_SHIFT);
+#endif
- free_area_init_node(0, NODE_DATA(0), zones_size,
- __pa(PAGE_OFFSET) >> PAGE_SHIFT, zholes_size);
}
#endif /* ! CONFIG_NEED_MULTIPLE_NODES */
diff -rup -X /usr/src/patchset-0.6/bin//dontdiff linux-2.6.17-rc5-mm3-101-add_free_area_init_nodes/arch/powerpc/mm/numa.c linux-2.6.17-rc5-mm3-102-powerpc_use_init_nodes/arch/powerpc/mm/numa.c
--- linux-2.6.17-rc5-mm3-101-add_free_area_init_nodes/arch/powerpc/mm/numa.c 2006-06-05 14:12:48.000000000 +0100
+++ linux-2.6.17-rc5-mm3-102-powerpc_use_init_nodes/arch/powerpc/mm/numa.c 2006-06-05 14:15:06.000000000 +0100
@@ -39,96 +39,6 @@ static bootmem_data_t __initdata plat_no
static int min_common_depth;
static int n_mem_addr_cells, n_mem_size_cells;
-/*
- * We need somewhere to store start/end/node for each region until we have
- * allocated the real node_data structures.
- */
-#define MAX_REGIONS (MAX_LMB_REGIONS*2)
-static struct {
- unsigned long start_pfn;
- unsigned long end_pfn;
- int nid;
-} init_node_data[MAX_REGIONS] __initdata;
-
-int __init early_pfn_to_nid(unsigned long pfn)
-{
- unsigned int i;
-
- for (i = 0; init_node_data[i].end_pfn; i++) {
- unsigned long start_pfn = init_node_data[i].start_pfn;
- unsigned long end_pfn = init_node_data[i].end_pfn;
-
- if ((start_pfn <= pfn) && (pfn < end_pfn))
- return init_node_data[i].nid;
- }
-
- return -1;
-}
-
-void __init add_region(unsigned int nid, unsigned long start_pfn,
- unsigned long pages)
-{
- unsigned int i;
-
- dbg("add_region nid %d start_pfn 0x%lx pages 0x%lx\n",
- nid, start_pfn, pages);
-
- for (i = 0; init_node_data[i].end_pfn; i++) {
- if (init_node_data[i].nid != nid)
- continue;
- if (init_node_data[i].end_pfn == start_pfn) {
- init_node_data[i].end_pfn += pages;
- return;
- }
- if (init_node_data[i].start_pfn == (start_pfn + pages)) {
- init_node_data[i].start_pfn -= pages;
- return;
- }
- }
-
- /*
- * Leave last entry NULL so we dont iterate off the end (we use
- * entry.end_pfn to terminate the walk).
- */
- if (i >= (MAX_REGIONS - 1)) {
- printk(KERN_ERR "WARNING: too many memory regions in "
- "numa code, truncating\n");
- return;
- }
-
- init_node_data[i].start_pfn = start_pfn;
- init_node_data[i].end_pfn = start_pfn + pages;
- init_node_data[i].nid = nid;
-}
-
-/* We assume init_node_data has no overlapping regions */
-void __init get_region(unsigned int nid, unsigned long *start_pfn,
- unsigned long *end_pfn, unsigned long *pages_present)
-{
- unsigned int i;
-
- *start_pfn = -1UL;
- *end_pfn = *pages_present = 0;
-
- for (i = 0; init_node_data[i].end_pfn; i++) {
- if (init_node_data[i].nid != nid)
- continue;
-
- *pages_present += init_node_data[i].end_pfn -
- init_node_data[i].start_pfn;
-
- if (init_node_data[i].start_pfn < *start_pfn)
- *start_pfn = init_node_data[i].start_pfn;
-
- if (init_node_data[i].end_pfn > *end_pfn)
- *end_pfn = init_node_data[i].end_pfn;
- }
-
- /* We didnt find a matching region, return start/end as 0 */
- if (*start_pfn == -1UL)
- *start_pfn = 0;
-}
-
static void __cpuinit map_cpu_to_node(int cpu, int node)
{
numa_cpu_lookup_table[cpu] = node;
@@ -471,8 +381,8 @@ new_range:
continue;
}
- add_region(nid, start >> PAGE_SHIFT,
- size >> PAGE_SHIFT);
+ add_active_range(nid, start >> PAGE_SHIFT,
+ (start >> PAGE_SHIFT) + (size >> PAGE_SHIFT));
if (--ranges)
goto new_range;
@@ -485,6 +395,7 @@ static void __init setup_nonnuma(void)
{
unsigned long top_of_ram = lmb_end_of_DRAM();
unsigned long total_ram = lmb_phys_mem_size();
+ unsigned long start_pfn, end_pfn;
unsigned int i;
printk(KERN_DEBUG "Top of RAM: 0x%lx, Total RAM: 0x%lx\n",
@@ -492,9 +403,11 @@ static void __init setup_nonnuma(void)
printk(KERN_DEBUG "Memory hole size: %ldMB\n",
(top_of_ram - total_ram) >> 20);
- for (i = 0; i < lmb.memory.cnt; ++i)
- add_region(0, lmb.memory.region[i].base >> PAGE_SHIFT,
- lmb_size_pages(&lmb.memory, i));
+ for (i = 0; i < lmb.memory.cnt; ++i) {
+ start_pfn = lmb.memory.region[i].base >> PAGE_SHIFT;
+ end_pfn = start_pfn + lmb_size_pages(&lmb.memory, i);
+ add_active_range(0, start_pfn, end_pfn);
+ }
node_set_online(0);
}
@@ -632,11 +545,11 @@ void __init do_init_bootmem(void)
(void *)(unsigned long)boot_cpuid);
for_each_online_node(nid) {
- unsigned long start_pfn, end_pfn, pages_present;
+ unsigned long start_pfn, end_pfn;
unsigned long bootmem_paddr;
unsigned long bootmap_pages;
- get_region(nid, &start_pfn, &end_pfn, &pages_present);
+ get_pfn_range_for_nid(nid, &start_pfn, &end_pfn);
/* Allocate the node structure node local if possible */
NODE_DATA(nid) = careful_allocation(nid,
@@ -669,19 +582,7 @@ void __init do_init_bootmem(void)
init_bootmem_node(NODE_DATA(nid), bootmem_paddr >> PAGE_SHIFT,
start_pfn, end_pfn);
- /* Add free regions on this node */
- for (i = 0; init_node_data[i].end_pfn; i++) {
- unsigned long start, end;
-
- if (init_node_data[i].nid != nid)
- continue;
-
- start = init_node_data[i].start_pfn << PAGE_SHIFT;
- end = init_node_data[i].end_pfn << PAGE_SHIFT;
-
- dbg("free_bootmem %lx %lx\n", start, end - start);
- free_bootmem_node(NODE_DATA(nid), start, end - start);
- }
+ free_bootmem_with_active_regions(nid, end_pfn);
/* Mark reserved regions on this node */
for (i = 0; i < lmb.reserved.cnt; i++) {
@@ -712,44 +613,14 @@ void __init do_init_bootmem(void)
}
}
- /* Add regions into sparsemem */
- for (i = 0; init_node_data[i].end_pfn; i++) {
- unsigned long start, end;
-
- if (init_node_data[i].nid != nid)
- continue;
-
- start = init_node_data[i].start_pfn;
- end = init_node_data[i].end_pfn;
-
- memory_present(nid, start, end);
- }
+ sparse_memory_present_with_active_regions(nid);
}
}
void __init paging_init(void)
{
- unsigned long zones_size[MAX_NR_ZONES];
- unsigned long zholes_size[MAX_NR_ZONES];
- int nid;
-
- memset(zones_size, 0, sizeof(zones_size));
- memset(zholes_size, 0, sizeof(zholes_size));
-
- for_each_online_node(nid) {
- unsigned long start_pfn, end_pfn, pages_present;
-
- get_region(nid, &start_pfn, &end_pfn, &pages_present);
-
- zones_size[ZONE_DMA] = end_pfn - start_pfn;
- zholes_size[ZONE_DMA] = zones_size[ZONE_DMA] - pages_present;
-
- dbg("free_area_init node %d %lx %lx (hole: %lx)\n", nid,
- zones_size[ZONE_DMA], start_pfn, zholes_size[ZONE_DMA]);
-
- free_area_init_node(nid, NODE_DATA(nid), zones_size, start_pfn,
- zholes_size);
- }
+ unsigned long end_pfn = lmb_end_of_DRAM() >> PAGE_SHIFT;
+ free_area_init_nodes(end_pfn, end_pfn, end_pfn, end_pfn);
}
static int __init early_numa(char *p)
diff -rup -X /usr/src/patchset-0.6/bin//dontdiff linux-2.6.17-rc5-mm3-101-add_free_area_init_nodes/arch/ppc/Kconfig linux-2.6.17-rc5-mm3-102-powerpc_use_init_nodes/arch/ppc/Kconfig
--- linux-2.6.17-rc5-mm3-101-add_free_area_init_nodes/arch/ppc/Kconfig 2006-06-05 14:12:48.000000000 +0100
+++ linux-2.6.17-rc5-mm3-102-powerpc_use_init_nodes/arch/ppc/Kconfig 2006-06-05 14:15:06.000000000 +0100
@@ -953,6 +953,9 @@ config NR_CPUS
config HIGHMEM
bool "High memory support"
+config ARCH_POPULATES_NODE_MAP
+ def_bool y
+
source kernel/Kconfig.hz
source kernel/Kconfig.preempt
source "mm/Kconfig"
diff -rup -X /usr/src/patchset-0.6/bin//dontdiff linux-2.6.17-rc5-mm3-101-add_free_area_init_nodes/arch/ppc/mm/init.c linux-2.6.17-rc5-mm3-102-powerpc_use_init_nodes/arch/ppc/mm/init.c
--- linux-2.6.17-rc5-mm3-101-add_free_area_init_nodes/arch/ppc/mm/init.c 2006-05-25 02:50:17.000000000 +0100
+++ linux-2.6.17-rc5-mm3-102-powerpc_use_init_nodes/arch/ppc/mm/init.c 2006-06-05 14:15:06.000000000 +0100
@@ -359,8 +359,7 @@ void __init do_init_bootmem(void)
*/
void __init paging_init(void)
{
- unsigned long zones_size[MAX_NR_ZONES], i;
-
+ unsigned long start_pfn, end_pfn;
#ifdef CONFIG_HIGHMEM
map_page(PKMAP_BASE, 0, 0); /* XXX gross */
pkmap_page_table = pte_offset_kernel(pmd_offset(pgd_offset_k
@@ -370,19 +369,22 @@ void __init paging_init(void)
(KMAP_FIX_BEGIN), KMAP_FIX_BEGIN), KMAP_FIX_BEGIN);
kmap_prot = PAGE_KERNEL;
#endif /* CONFIG_HIGHMEM */
-
- /*
- * All pages are DMA-able so we put them all in the DMA zone.
- */
- zones_size[ZONE_DMA] = total_lowmem >> PAGE_SHIFT;
- for (i = 1; i < MAX_NR_ZONES; i++)
- zones_size[i] = 0;
+ /* All pages are DMA-able so we put them all in the DMA zone. */
+ start_pfn = __pa(PAGE_OFFSET) >> PAGE_SHIFT;
+ end_pfn = start_pfn + (total_memory >> PAGE_SHIFT);
+ add_active_range(0, start_pfn, end_pfn);
#ifdef CONFIG_HIGHMEM
- zones_size[ZONE_HIGHMEM] = (total_memory - total_lowmem) >> PAGE_SHIFT;
+ free_area_init_nodes(total_lowmem >> PAGE_SHIFT,
+ total_lowmem >> PAGE_SHIFT,
+ total_lowmem >> PAGE_SHIFT,
+ total_memory >> PAGE_SHIFT);
+#else
+ free_area_init_nodes(total_memory >> PAGE_SHIFT,
+ total_memory >> PAGE_SHIFT,
+ total_memory >> PAGE_SHIFT,
+ total_memory >> PAGE_SHIFT);
#endif /* CONFIG_HIGHMEM */
-
- free_area_init(zones_size);
}
void __init mem_init(void)
More information about the Linuxppc-dev
mailing list