April 2014 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Tue Apr 1 00:32:32 EST 2014
Ending: Wed Apr 30 19:59:37 EST 2014
Messages: 733

• [PATCH 3/4] KVM: PPC: Alow kvmppc_get_last_inst() to fail   Alexander Graf
• [PATCH 4/4] KVM: PPC: Bookehv: Get vcpu's last instruction for emulation   Alexander Graf
  • [PATCH 4/4] KVM: PPC: Bookehv: Get vcpu's last instruction for emulation   Scott Wood
    • [PATCH 4/4] KVM: PPC: Bookehv: Get vcpu's last instruction for emulation   Alexander Graf
      • [PATCH 4/4] KVM: PPC: Bookehv: Get vcpu's last instruction for emulation   Scott Wood
      • [PATCH 4/4] KVM: PPC: Bookehv: Get vcpu's last instruction for emulation   Alexander Graf
• [PATCH v6 00/11] reserved-memory regions/CMA in devicetree, again   Grant Likely
• [RFC PATCH] powerpc/le: enable RTAS events support   Nathan Fontenot
  • [RFC PATCH] powerpc/le: enable RTAS events support   Geert Uytterhoeven
    • [RFC PATCH] powerpc/le: enable RTAS events support   Greg Kurz
• [PATCH] ASoC: fsl_sai: Fix buggy configurations in trigger()   Mark Brown
  • [PATCH] ASoC: fsl_sai: Fix buggy configurations in trigger()   Li.Xiubo at freescale.com
• [PATCH] powerpc/le: enable RTAS events support   Stewart Smith
  • [PATCH] powerpc/le: enable RTAS events support   Stewart Smith
• OOPS in hvc / virtconsole   Andy Lutomirski
  • OOPS in hvc / virtconsole   Andy Lutomirski
• [PATCH 1/2] powerpc/powernv: Add OPAL message log interface   Joel Stanley
• Bug in reclaim logic with exhausted nodes?   Nishanth Aravamudan
  • Bug in reclaim logic with exhausted nodes?   Christoph Lameter
• [PATCH 2/2] Make the diu driver work without board level initilization   Dongsheng.Wang at freescale.com
  • [PATCH 2/2] Make the diu driver work without board level initilization   Li.Xiubo at freescale.com
    • [PATCH 2/2] Make the diu driver work without board level initilization   Jason.Jin at freescale.com
      • [PATCH 2/2] Make the diu driver work without board level initilization   Scott Wood
      • [PATCH 2/2] Make the diu driver work without board level initilization   Jason.Jin at freescale.com
• [PATCH bisect 0/2] ASoC: fsl_sai: Overwrite trigger()   Nicolin Chen
  • [PATCH bisect 1/2] ASoC: fsl_sai: Fix buggy configurations in trigger()   Nicolin Chen
    • [PATCH bisect 1/2] ASoC: fsl_sai: Fix buggy configurations in trigger()   Mark Brown
  • [PATCH bisect 2/2] ASoC: fsl_sai: Separately enable interrupts for Tx and Rx streams   Nicolin Chen
    • [PATCH bisect 2/2] ASoC: fsl_sai: Separately enable interrupts for Tx and Rx streams   Dongsheng.Wang at freescale.com
      • [PATCH bisect 2/2] ASoC: fsl_sai: Separately enable interrupts for Tx and Rx streams   Nicolin Chen
      • [PATCH bisect 2/2] ASoC: fsl_sai: Separately enable interrupts for Tx and Rx streams   Dongsheng.Wang at freescale.com
      • [PATCH bisect 2/2] ASoC: fsl_sai: Separately enable interrupts for Tx and Rx streams   Nicolin Chen
      • [PATCH bisect 2/2] ASoC: fsl_sai: Separately enable interrupts for Tx and Rx streams   Dongsheng.Wang at freescale.com
    • [PATCH bisect 2/2] ASoC: fsl_sai: Separately enable interrupts for Tx and Rx streams   Mark Brown
      • [PATCH bisect 2/2] ASoC: fsl_sai: Separately enable interrupts for Tx and Rx streams   Nicolin Chen
      • [PATCH bisect 2/2] ASoC: fsl_sai: Separately enable interrupts for Tx and Rx streams   Mark Brown
      • [PATCH bisect 2/2] ASoC: fsl_sai: Separately enable interrupts for Tx and Rx streams   Nicolin Chen
  • [PATCH bisect 0/2] ASoC: fsl_sai: Overwrite trigger()   Mark Brown
    • [PATCH bisect 0/2] ASoC: fsl_sai: Overwrite trigger()   Nicolin Chen
• [PATCH v2 0/2] OPAL message log interface   Joel Stanley
  • [PATCH v2 1/2] powerpc/powernv: Add OPAL message log interface   Joel Stanley
  • [PATCH v2 2/2] powerpc/powernv: Add invalid OPAL call   Joel Stanley
• [PATCH REPOST v5 2/3] powernv, cpufreq: cpufreq driver for powernv platform   Gautham R. Shenoy
  • [PATCH REPOST v5 3/3] powernv, cpufreq: Use cpufreq_frequency_table.driver_data to store pstate ids   Gautham R. Shenoy
  • [PATCH REPOST v5 1/3] powernv, cpufreq: Select CPUFreq related Kconfig options for powernv   Gautham R. Shenoy
    • [PATCH REPOST v5 1/3] powernv, cpufreq: Select CPUFreq related Kconfig options for powernv   Benjamin Herrenschmidt
      • [PATCH REPOST v5 1/3] powernv, cpufreq: Select CPUFreq related Kconfig options for powernv   Rafael J. Wysocki
      • [PATCH REPOST v5 1/3] powernv, cpufreq: Select CPUFreq related Kconfig options for powernv   Benjamin Herrenschmidt
      • [PATCH REPOST v5 1/3] powernv, cpufreq: Select CPUFreq related Kconfig options for powernv   Rafael J. Wysocki
      • [PATCH REPOST v5 1/3] powernv, cpufreq: Select CPUFreq related Kconfig options for powernv   Benjamin Herrenschmidt
• [PATCH 1/2] bootmem/powerpc: Unify bootmem initialization   Emil Medve
• [PATCH 2/2] powerpc: Enable NO_BOOTMEM   Emil Medve
• [PATCH] spi: add "spi-lsb-first" to devicetree   Zhao Qiang
  • [PATCH] spi: add "spi-lsb-first" to devicetree   Baruch Siach
• Build regressions/improvements in v3.14   Geert Uytterhoeven
• [PATCH] cpuidle: add freescale e500 family porcessors idle support   Dongsheng Wang
  • [PATCH] cpuidle: add freescale e500 family porcessors idle support   Daniel Lezcano
    • [PATCH] cpuidle: add freescale e500 family porcessors idle support   Daniel Lezcano
    • [PATCH] cpuidle: add freescale e500 family porcessors idle support   Dongsheng.Wang at freescale.com
      • [PATCH] cpuidle: add freescale e500 family porcessors idle support   Daniel Lezcano
      • [PATCH] cpuidle: add freescale e500 family porcessors idle support   Dongsheng.Wang at freescale.com
      • [PATCH] cpuidle: add freescale e500 family porcessors idle support   Daniel Lezcano
  • [PATCH] cpuidle: add freescale e500 family porcessors idle support   Scott Wood
• [PATCH v2] spi: add "spi-lsb-first" to devicetree   Zhao Qiang
  • [PATCH v2] spi: add "spi-lsb-first" to devicetree   Mark Brown
• [RFC] powerpc, ptrace: Add few more ptrace request macros   Anshuman Khandual
  • [RFC] powerpc, ptrace: Add few more ptrace request macros   Michael Neuling
    • [RFC] powerpc, ptrace: Add few more ptrace request macros   Anshuman Khandual
• [PATCH] ASoC: fsl_sai: Add imx6sx platform support   Nicolin Chen
  • [PATCH] ASoC: fsl_sai: Add imx6sx platform support   Mark Brown
    • [PATCH] ASoC: fsl_sai: Add imx6sx platform support   Nicolin Chen
• [PATCH 0/2] Add ipg clock control to sai driver   Nicolin Chen
  • [PATCH 2/2] ARM: dts: Add ipg clock for sai2 on VF610 platform   Nicolin Chen
  • [alsa-devel] [PATCH 0/2] Add ipg clock control to sai driver   Nicolin Chen
• [PATCH 1/2] ASoC: fsl_sai: Add clock control for SAI   Nicolin Chen
  • [PATCH 1/2] ASoC: fsl_sai: Add clock control for SAI   Li.Xiubo at freescale.com
    • [PATCH 1/2] ASoC: fsl_sai: Add clock control for SAI   Nicolin Chen
      • [PATCH 1/2] ASoC: fsl_sai: Add clock control for SAI   Li.Xiubo at freescale.com
      • [PATCH 1/2] ASoC: fsl_sai: Add clock control for SAI   Nicolin Chen
• [PATCH] powerpc: Use 64k io pages when we never see an HEA   Alexander Graf
• [PATCH 15/33] powerpc: Fix ABIv2 issues with stack offsets in assembly code   Philippe Bergheaud
• [PATCH 1/3] powerpc/fsl-booke: Add support for T2080/T2081 SoC   Scott Wood
• [PATCH 2/3] powerpc/fsl-booke: Add initial T208x QDS board support   Scott Wood
• [git pull] Please pull powerpc.git merge branch   Benjamin Herrenschmidt
  • [git pull] Please pull powerpc.git merge branch   Benjamin Herrenschmidt
  • [git pull] Please pull powerpc.git merge branch   Benjamin Herrenschmidt
  • [git pull] Please pull powerpc.git merge branch   Benjamin Herrenschmidt
• [git pull] Please pull powerpc.git next branch   Benjamin Herrenschmidt
• [git pull] Please pull powerpc.git powernv-cpuidle branch   Benjamin Herrenschmidt
• [PATCH] power, sched: stop updating inside arch_update_cpu_topology() when nothing to be update   Michael wang
  • [PATCH] power, sched: stop updating inside arch_update_cpu_topology() when nothing to be update   Srivatsa S. Bhat
    • [PATCH] power, sched: stop updating inside arch_update_cpu_topology() when nothing to be update   Michael wang
      • [PATCH] power, sched: stop updating inside arch_update_cpu_topology() when nothing to be update   Srivatsa S. Bhat
  • [PATCH] power, sched: stop updating inside arch_update_cpu_topology() when nothing to be update   Srivatsa S. Bhat
    • [PATCH] power, sched: stop updating inside arch_update_cpu_topology() when nothing to be update   Michael wang
  • [PATCH v2] power, sched: stop updating inside arch_update_cpu_topology() when nothing to be update   Michael wang
    • [PATCH v2] power, sched: stop updating inside arch_update_cpu_topology() when nothing to be update   Srivatsa S. Bhat
    • [PATCH v2] power, sched: stop updating inside arch_update_cpu_topology() when nothing to be update   Michael wang
• [PATCH 1/1] mm: move FAULT_AROUND_ORDER to arch/   Madhavan Srinivasan
• [PATCH 0/3] Add new ptrace request macros on PowerPC   Anshuman Khandual
  • [PATCH 1/3] elf: Add some new PowerPC specifc note sections   Anshuman Khandual
  • [PATCH 2/3] powerpc, ptrace: Add new ptrace request macros for transactional memory   Anshuman Khandual
    • [PATCH 2/3] powerpc, ptrace: Add new ptrace request macros for transactional memory   Pedro Alves
      • [PATCH 2/3] powerpc, ptrace: Add new ptrace request macros for transactional memory   Anshuman Khandual
  • [PATCH 3/3] powerpc, ptrace: Add new ptrace request macro for miscellaneous registers   Anshuman Khandual
  • [PATCH 0/3] Add new ptrace request macros on PowerPC   Anshuman Khandual
    • [PATCH 0/3] Add new ptrace request macros on PowerPC   Anshuman Khandual
      • [PATCH 0/3] Add new ptrace request macros on PowerPC   Michael Neuling
      • [PATCH 0/3] Add new ptrace request macros on PowerPC   Anshuman Khandual
      • [PATCH 0/3] Add new ptrace request macros on PowerPC   Michael Neuling
      • [PATCH 0/3] Add new ptrace request macros on PowerPC   Anshuman Khandual
      • [PATCH 0/3] Add new ptrace request macros on PowerPC   Michael Neuling
      • [PATCH 0/3] Add new ptrace request macros on PowerPC   Anshuman Khandual
• [PATCH] gpio: ge: Convert to platform driver   Alexandre Courbot
  • Re: [PATCH] gpio: ge: Convert to platform driver   Alexander Shiyan
  • [PATCH] gpio: ge: Convert to platform driver   Linus Walleij
    • Re: [PATCH] gpio: ge: Convert to platform driver   Alexander Shiyan
• [PATCH v2 0/2] ASoC: fsl_sai: Add bus clock and mclks with clock controls   Nicolin Chen
  • [PATCH v2 1/2] ASoC: fsl_sai: Add clock controls for SAI   Nicolin Chen
    • [PATCH v2 1/2] ASoC: fsl_sai: Add clock controls for SAI   Mark Brown
      • [PATCH v2 1/2] ASoC: fsl_sai: Add clock controls for SAI   Nicolin Chen
  • [PATCH v2 2/2] ARM: dts: Append clock bindings for sai2 on VF610 platform   Nicolin Chen
    • [PATCH v2 2/2] ARM: dts: Append clock bindings for sai2 on VF610 platform   Shawn Guo
      • [PATCH v2 2/2] ARM: dts: Append clock bindings for sai2 on VF610 platform   Nicolin Chen
      • [PATCH v2 2/2] ARM: dts: Append clock bindings for sai2 on VF610 platform   Li.Xiubo at freescale.com
    • [PATCH v2 2/2] ARM: dts: Append clock bindings for sai2 on VF610 platform   Mark Brown
      • [PATCH v2 2/2] ARM: dts: Append clock bindings for sai2 on VF610 platform   Nicolin Chen
• [PATCH] powerpc/mm: numa pte should be handled via slow path in get_user_pages_fast   Aneesh Kumar K.V
  • [PATCH] powerpc/mm: numa pte should be handled via slow path in get_user_pages_fast   Benjamin Herrenschmidt
    • [PATCH] powerpc/mm: numa pte should be handled via slow path in get_user_pages_fast   Aneesh Kumar K.V
• [PATCH 6/7] DMA: Freescale: use spin_lock_bh instead of spin_lock_irqsave   Vinod Koul
  • [PATCH 6/7] DMA: Freescale: use spin_lock_bh instead of spin_lock_irqsave   Hongbo Zhang
• [bug report] bad error path in fsl_open_inb_mbox()   Dan Carpenter
• [RFC PATCH] hugetlb: ensure hugepage access is denied if hugepages are not supported   Nishanth Aravamudan
  • [RFC PATCH] hugetlb: ensure hugepage access is denied if hugepages are not supported   Aneesh Kumar K.V
    • [RFC PATCH] hugetlb: ensure hugepage access is denied if hugepages are not supported   Nishanth Aravamudan
• [PATCH RFC v10 0/6] MPC512x DMA slave s/g support, OF DMA lookup   Alexander Popov
  • [PATCH RFC v10 0/6] MPC512x DMA slave s/g support, OF DMA lookup   Alexander Popov
• [PATCH 0/2] powerpc/perf: fixup 2 patches from the 24x7 series   Cody P Schafer
• [PATCH 1/2] fixup: "powerpc/perf: Add support for the hv 24x7 interface"   Cody P Schafer
  • [PATCH 1/2] fixup: "powerpc/perf: Add support for the hv 24x7 interface"   Benjamin Herrenschmidt
    • [PATCH 1/2] fixup: "powerpc/perf: Add support for the hv 24x7 interface"   Anton Blanchard
• [PATCH 2/2] fixup: "powerpc/perf: Add support for the hv gpci (get performance counter info) interface"   Cody P Schafer
• [PATCH v2] powernv: kvm: make _PAGE_NUMA take effect   Liu ping fan
  • [PATCH v2] powernv: kvm: make _PAGE_NUMA take effect   Alexander Graf
    • [PATCH v2] powernv: kvm: make _PAGE_NUMA take effect   Alexander Graf
      • [PATCH v2] powernv: kvm: make _PAGE_NUMA take effect   Alexander Graf
    • [PATCH v2] powernv: kvm: make _PAGE_NUMA take effect   Aneesh Kumar K.V
      • [PATCH v2] powernv: kvm: make _PAGE_NUMA take effect   Alexander Graf
      • [PATCH v2] powernv: kvm: make _PAGE_NUMA take effect   Liu ping fan
      • [PATCH v2] powernv: kvm: make _PAGE_NUMA take effect   Alexander Graf
• MPC8641 based custom board Kernel stuck at 1000Mhz core clock   sanjeev sharma
  • MPC8641 based custom board Kernel stuck at 1000Mhz core clock   Ashish
• [PATCH] powerpc: use of_node_init() for the fakenode in msi_bitmap.c   Li Zhong
• [PATCH 3/7] DMA: Freescale: add fsl_dma_free_descriptor() to reduce code duplication   Hongbo Zhang
• on kernel 2.6.34.15, vlan and raw packets can not be received with gfar-enet nic   zhuyj
  • on kernel 2.6.34.15, vlan and raw packets can not be received with gfar-enet nic   Willy Tarreau
    • on kernel 2.6.34.15, vlan and raw packets can not be received with gfar-enet nic   zhuyj
      • on kernel 2.6.34.15, vlan and raw packets can not be received with gfar-enet nic   Willy Tarreau
      • on kernel 2.6.34.15, vlan and raw packets can not be received with gfar-enet nic   zhuyj
    • on kernel 2.6.34.15, vlan and raw packets can not be received with gfar-enet nic   zhuyj
      • on kernel 2.6.34.15, vlan and raw packets can not be received with gfar-enet nic   Willy Tarreau
• cscope: issue with symlinks in tools/testing/selftests/powerpc/copyloops/   Yann Droneaud
  • cscope: issue with symlinks in tools/testing/selftests/powerpc/copyloops/   Neil Horman
    • cscope: issue with symlinks in tools/testing/selftests/powerpc/copyloops/   Gerhard Sittig
      • cscope: issue with symlinks in tools/testing/selftests/powerpc/copyloops/   Neil Horman
      • cscope: issue with symlinks in tools/testing/selftests/powerpc/copyloops/   Gerhard Sittig
      • cscope: issue with symlinks in tools/testing/selftests/powerpc/copyloops/   Neil Horman
• [PATCH 00/20] FDT clean-ups and libfdt support   Rob Herring
  • [PATCH 09/20] of/fdt: create common debugfs   Rob Herring
    • [PATCH 09/20] of/fdt: create common debugfs   Michal Simek
      • [PATCH 09/20] of/fdt: create common debugfs   Michal Simek
      • [PATCH 09/20] of/fdt: create common debugfs   Rob Herring
      • [PATCH 09/20] of/fdt: create common debugfs   Michal Simek
      • [PATCH 09/20] of/fdt: create common debugfs   Rob Herring
      • [PATCH 09/20] of/fdt: create common debugfs   Michal Simek
      • [PATCH 09/20] of/fdt: create common debugfs   Rob Herring
      • [PATCH 09/20] of/fdt: create common debugfs   Michal Simek
  • [PATCH 20/20] of: push struct boot_param_header and defines into powerpc   Rob Herring
• hugetlb: ensure hugepage access is denied if hugepages are not supported   Nishanth Aravamudan
  • hugetlb: ensure hugepage access is denied if hugepages are not supported   Aneesh Kumar K.V
  • hugetlb: ensure hugepage access is denied if hugepages are not supported   Mel Gorman
• [PATCH v2 0/8] DMA: Freescale: driver cleanups and enhancements   hongbo.zhang at freescale.com
  • [PATCH v2 3/8] DMA: Freescale: remove attribute DMA_INTERRUPT of dmaengine   hongbo.zhang at freescale.com
  • [PATCH v2 4/8] DMA: Freescale: add fsl_dma_free_descriptor() to reduce code duplication   hongbo.zhang at freescale.com
  • [PATCH v2 5/8] DMA: Freescale: move functions to avoid forward declarations   hongbo.zhang at freescale.com
  • [PATCH v2 6/8] DMA: Freescale: change descriptor release process for supporting async_tx   hongbo.zhang at freescale.com
  • [PATCH v2 7/8] DMA: Freescale: use spin_lock_bh instead of spin_lock_irqsave   hongbo.zhang at freescale.com
  • [PATCH v2 8/8] DMA: Freescale: add suspend resume functions for DMA driver   hongbo.zhang at freescale.com
    • [PATCH v2 8/8] DMA: Freescale: add suspend resume functions for DMA driver   Hongbo Zhang
• [PATCH v2 1/8] DMA: Freescale: remove the unnecessary FSL_DMA_LD_DEBUG   hongbo.zhang at freescale.com
• [PATCH v2 2/8] DMA: Freescale: unify register access methods   hongbo.zhang at freescale.com
• [PATCH] powerpc/powernv: Add debugfs file to grab opalv3 trace data   Benjamin Herrenschmidt
• [PATCH 0/7] Build ppc64le kernel using ABIv2, supplemental patches   Anton Blanchard
  • [PATCH 1/7] powerpc: Add _GLOBAL_TOC for ABIv2 assembly functions exported to modules   Anton Blanchard
  • [PATCH 2/7] powerpc: ftrace_caller, _mcount is exported to modules so needs _GLOBAL_TOC()   Anton Blanchard
  • [PATCH 3/7] powerpc/kprobes: Fix ABIv2 issues with kprobe_lookup_name   Anton Blanchard
  • [PATCH 4/7] powerpc/modules: Create is_module_trampoline()   Anton Blanchard
  • [PATCH 5/7] powerpc/modules: Create module_trampoline_target()   Anton Blanchard
  • [PATCH 6/7] powerpc/ftrace: Use module loader helpers to parse trampolines   Anton Blanchard
    • [PATCH 6/7] powerpc/ftrace: Use module loader helpers to parse trampolines   Rusty Russell
  • [PATCH 7/7] powerpc/ftrace: Fix ABIv2 issues with __ftrace_make_call   Anton Blanchard
  • [PATCH 0/7] Build ppc64le kernel using ABIv2, supplemental patches   Michael Neuling
• [PATCH V2 0/2] FAULT_AROUND_ORDER patchset performance data for powerpc   Madhavan Srinivasan
  • [PATCH V2 1/2] mm: move FAULT_AROUND_ORDER to arch/   Madhavan Srinivasan
    • [PATCH V2 1/2] mm: move FAULT_AROUND_ORDER to arch/   Kirill A. Shutemov
      • [PATCH V2 1/2] mm: move FAULT_AROUND_ORDER to arch/   Madhavan Srinivasan
    • [PATCH V2 1/2] mm: move FAULT_AROUND_ORDER to arch/   Dave Hansen
      • [PATCH V2 1/2] mm: move FAULT_AROUND_ORDER to arch/   David Miller
      • [PATCH V2 1/2] mm: move FAULT_AROUND_ORDER to arch/   Madhavan Srinivasan
      • [PATCH V2 1/2] mm: move FAULT_AROUND_ORDER to arch/   Benjamin Herrenschmidt
      • [PATCH V2 1/2] mm: move FAULT_AROUND_ORDER to arch/   Madhavan Srinivasan
      • [PATCH V2 1/2] mm: move FAULT_AROUND_ORDER to arch/   Peter Zijlstra
      • [PATCH V2 1/2] mm: move FAULT_AROUND_ORDER to arch/   Dave Hansen
      • [PATCH V2 1/2] mm: move FAULT_AROUND_ORDER to arch/   Madhavan Srinivasan
      • [PATCH V2 1/2] mm: move FAULT_AROUND_ORDER to arch/   Dave Hansen
      • [PATCH V2 1/2] mm: move FAULT_AROUND_ORDER to arch/   Rusty Russell
  • [PATCH V2 2/2] mm: add FAULT_AROUND_ORDER Kconfig paramater for powerpc   Madhavan Srinivasan
    • [PATCH V2 2/2] mm: add FAULT_AROUND_ORDER Kconfig paramater for powerpc   Ingo Molnar
      • [PATCH V2 2/2] mm: add FAULT_AROUND_ORDER Kconfig paramater for powerpc   Ingo Molnar
• [PATCH] ASoC: fsl_sai: Fix Bit Clock Polarity configurations   Nicolin Chen
  • [PATCH] ASoC: fsl_sai: Fix Bit Clock Polarity configurations   Li.Xiubo at freescale.com
    • [PATCH] ASoC: fsl_sai: Fix Bit Clock Polarity configurations   Nicolin Chen
      • [PATCH] ASoC: fsl_sai: Fix Bit Clock Polarity configurations   Li.Xiubo at freescale.com
  • [PATCH] ASoC: fsl_sai: Fix Bit Clock Polarity configurations   Mark Brown
    • [PATCH] ASoC: fsl_sai: Fix Bit Clock Polarity configurations   Nicolin Chen
      • [PATCH] ASoC: fsl_sai: Fix Bit Clock Polarity configurations   Mark Brown
• [PATCH v2] powerpc/le: enable RTAS events support   Greg Kurz
  • [PATCH v2] powerpc/le: enable RTAS events support   Stewart Smith
  • [PATCH v2] powerpc/le: enable RTAS events support   Nathan Fontenot
• [PATCH v2] powerpc/tm: Disable IRQ in tm_recheckpoint   Michael Neuling
• [PATCH v3 0/2] ASoC: fsl_sai: Add bus clock and mclks with clock controls   Nicolin Chen
  • [PATCH v3 1/2] ASoC: fsl_sai: Add clock controls for SAI   Nicolin Chen
  • [PATCH v3 2/2] ARM: dts: Append clock bindings for sai2 on VF610 platform   Nicolin Chen
    • [PATCH v3 2/2] ARM: dts: Append clock bindings for sai2 on VF610 platform   Shawn Guo
      • [PATCH v3 2/2] ARM: dts: Append clock bindings for sai2 on VF610 platform   Nicolin Chen
    • [PATCH v3 2/2] ARM: dts: Append clock bindings for sai2 on VF610 platform   Shawn Guo
      • [PATCH v3 2/2] ARM: dts: Append clock bindings for sai2 on VF610 platform   Nicolin Chen
• [1/2, v9] powerpc/mpc85xx:Add initial device tree support of T104x   Prabhakar Kushwaha
  • [1/2,v9] powerpc/mpc85xx:Add initial device tree support of T104x   Scott Wood
  • [1/2,v9] powerpc/mpc85xx:Add initial device tree support of T104x   Scott Wood
• [PATCH] powerpc/le: Avoid creatng R_PPC64_TOCSAVE relocations for modules.   Anton Blanchard
• ISA kernel modules that build and oops on ppc64   Anton Blanchard
• [PATCH v2] powerpc 32: Provides VIRT_CPU_ACCOUNTING   Christophe Leroy
  • [PATCH v2] powerpc 32: Provides VIRT_CPU_ACCOUNTING   Benjamin Herrenschmidt
• tools/testing/selftests/ptrace/peeksiginfo.c bug   Thierry FAUCK
• [PATCH] powerpc/opal: Add missing include   Geert Uytterhoeven
  • [PATCH] powerpc/opal: Add missing include   Benjamin Herrenschmidt
• [PATCH] powerpc/4xx: Fix section mismatch in ppc4xx_pci.c   Alistair Popple
• [PATCH] powerpc/le: Fix module build error   Anton Blanchard
• [PATCH v3 2/3] devcietree: bindings: add some MFD Keymile FPGAs   Scott Wood
  • [PATCH v3 2/3] devcietree: bindings: add some MFD Keymile FPGAs   Valentin Longchamp
  • [PATCH v3 2/3] devcietree: bindings: add some MFD Keymile FPGAs   Rob Herring
• [PATCH v3 3/3] powerpc/mpc85xx: add support for Keymile's kmcoge4 board   Scott Wood
• [PATCH] powerpc/qe: Setup clock source for TDM   Scott Wood
• [PATCH] powerpc/powernv Adapt opal-elog and opal-dump to new sysfs_remove_file_self API from (removed) sysfs_schedule_callback   Stewart Smith
• [RFC PATCH powerpc] Protect remove_memory() with device hotplug lock   Li Zhong
  • [RFC PATCH powerpc] Protect remove_memory() with device hotplug lock   Nathan Fontenot
    • [RFC PATCH v2 powerpc] Protect remove_memory() with device hotplug lock   Li Zhong
• [PATCH] powerpc/rmu: Fix the error memory free parameters   Liu Gang
  • [PATCH] powerpc/rmu: Fix the error memory free parameters   Gang.Liu at freescale.com
• [PATCH v4] ASoC: fsl_sai: Add clock controls for SAI   Nicolin Chen
  • [PATCH v4] ASoC: fsl_sai: Add clock controls for SAI   Li.Xiubo at freescale.com
    • [PATCH v4] ASoC: fsl_sai: Add clock controls for SAI   Nicolin Chen
• [PATCH 1/2][powerpc/fsl] Added binding for Freescale CoreNet coherency fabric (CCF)   Diana Craciun
  • [PATCH 2/2][powerpc/fsl] Updated T4240 corenet-cf node in device tree   Diana Craciun
• [PATCH 01/60] powerpc/powernv: Return secondary CPUs to firmware before FW update   Vasant Hegde
  • [PATCH 01/60] powerpc/powernv: Return secondary CPUs to firmware before FW update   Vasant Hegde
• [PATCH v2] fix wrong usage of dmaengine_unmap_put in async_xxx   Dan Williams
  • [PATCH v2] fix wrong usage of dmaengine_unmap_put in async_xxx   Xuelin Shi
• [PATCH v2] fix dmaengine_unmap failure   Dan Williams
• [PATCH] Fix 3bc95598 'powerpc/PCI: Use list_for_each_entry() for bus traversal'   Mike Qiu
  • [PATCH] Fix 3bc95598 'powerpc/PCI: Use list_for_each_entry() for bus traversal'   Benjamin Herrenschmidt
    • [PATCH] Fix 3bc95598 'powerpc/PCI: Use list_for_each_entry() for bus traversal'   Mike Qiu
  • [PATCH] Fix 3bc95598 'powerpc/PCI: Use list_for_each_entry() for bus traversal'   Bjorn Helgaas
    • [PATCH] Fix 3bc95598 'powerpc/PCI: Use list_for_each_entry() for bus traversal'   Benjamin Herrenschmidt
• [PATCH v3 0/8] DMA: Freescale: driver cleanups and enhancements   hongbo.zhang at freescale.com
  • [PATCH v3 1/8] DMA: Freescale: remove the unnecessary FSL_DMA_LD_DEBUG   hongbo.zhang at freescale.com
    • [PATCH v3 0/8] DMA: Freescale: driver cleanups and enhancements   Hongbo Zhang
  • [PATCH v3 2/8] DMA: Freescale: unify register access methods   hongbo.zhang at freescale.com
    • [PATCH v3 2/8] DMA: Freescale: unify register access methods   David Laight
      • [PATCH v3 2/8] DMA: Freescale: unify register access methods   Hongbo Zhang
  • [PATCH v3 3/8] DMA: Freescale: remove attribute DMA_INTERRUPT of dmaengine   hongbo.zhang at freescale.com
  • [PATCH v3 4/8] DMA: Freescale: add fsl_dma_free_descriptor() to reduce code duplication   hongbo.zhang at freescale.com
    • [PATCH v3 4/8] DMA: Freescale: add fsl_dma_free_descriptor() to reduce code duplication   Andy Shevchenko
      • [PATCH v3 4/8] DMA: Freescale: add fsl_dma_free_descriptor() to reduce code duplication   Hongbo Zhang
      • [PATCH v3 4/8] DMA: Freescale: add fsl_dma_free_descriptor() to reduce code duplication   Andy Shevchenko
      • [PATCH v3 4/8] DMA: Freescale: add fsl_dma_free_descriptor() to reduce code duplication   Hongbo Zhang
  • [PATCH v3 5/8] DMA: Freescale: move functions to avoid forward declarations   hongbo.zhang at freescale.com
  • [PATCH v3 6/8] DMA: Freescale: change descriptor release process for supporting async_tx   hongbo.zhang at freescale.com
    • [PATCH v3 6/8] DMA: Freescale: change descriptor release process for supporting async_tx   Andy Shevchenko
      • [PATCH v3 6/8] DMA: Freescale: change descriptor release process for supporting async_tx   Hongbo Zhang
      • [PATCH v3 6/8] DMA: Freescale: change descriptor release process for supporting async_tx   Hongbo Zhang
      • [PATCH v3 6/8] DMA: Freescale: change descriptor release process for supporting async_tx   Andy Shevchenko
  • [PATCH v3 7/8] DMA: Freescale: use spin_lock_bh instead of spin_lock_irqsave   hongbo.zhang at freescale.com
  • [PATCH v3 8/8] DMA: Freescale: add suspend resume functions for DMA driver   hongbo.zhang at freescale.com
    • [PATCH v3 8/8] DMA: Freescale: add suspend resume functions for DMA driver   Andy Shevchenko
      • [PATCH v3 8/8] DMA: Freescale: add suspend resume functions for DMA driver   Hongbo Zhang
• [PATCH v5] ASoC: fsl_sai: Add clock controls for SAI   Nicolin Chen
  • [PATCH v5] ASoC: fsl_sai: Add clock controls for SAI   Shawn Guo
    • [PATCH v5] ASoC: fsl_sai: Add clock controls for SAI   Nicolin Chen
• [PATCH] PCI/hotplug/rphahp: Fix endianess issues   Laurent Dufour
  • [PATCH] PCI/hotplug/rphahp: Fix endianess issues   Bjorn Helgaas
• [PATCH v6] ASoC: fsl_sai: Add clock controls for SAI   Nicolin Chen
  • [PATCH v6] ASoC: fsl_sai: Add clock controls for SAI   Nicolin Chen
    • [PATCH v6] ASoC: fsl_sai: Add clock controls for SAI   Mark Brown
• [PATCH] hugetlb: ensure hugepage access is denied if hugepages are not supported   Nishanth Aravamudan
• [PATCH] powerpc: Don't try to set LPCR unless we're in hypervisor mode   Paul Mackerras
• [PATCH 5/7] powerpc/ppc64: Do not turn AIL (reloc-on interrupts) too early   Michael Neuling
• [PATCH v3] dmaengine: driver support for FSL RaidEngine device.   xuelin.shi at freescale.com
  • [PATCH v3] dmaengine: driver support for FSL RaidEngine device.   Dan Williams
    • [PATCH v3] dmaengine: driver support for FSL RaidEngine device.   Dan Williams
    • [PATCH v3] dmaengine: driver support for FSL RaidEngine device.   Xuelin Shi
      • [PATCH v3] dmaengine: driver support for FSL RaidEngine device.   Dan Williams
      • [PATCH v3] dmaengine: driver support for FSL RaidEngine device.   Xuelin Shi
• [PATCH 0/3] ppc:Set runlatch bits correctly for offline threads and vcpus   Preeti U Murthy
  • [PATCH 0/3] ppc:Set runlatch bits correctly for offline threads and vcpus   Preeti U Murthy
    • [PATCH 1/3] ppc/powernv: Set the runlatch bits correctly for offline cpus   Preeti U Murthy
    • [PATCH 2/3] ppc/kvm: Set the runlatch bit of a CPU just before starting guest   Preeti U Murthy
    • [PATCH 3/3] ppc/kvm: Clear the runlatch bit of a vcpu before napping   Preeti U Murthy
• [PATCH] ASoC: fsl_sai: Use FSL_SAI_xXR() and regmap_update_bits() to simplify code   Nicolin Chen
  • [PATCH] ASoC: fsl_sai: Use FSL_SAI_xXR() and regmap_update_bits() to simplify code   Mark Brown
• [PATCH v3] powerpc: kvm: make _PAGE_NUMA take effect   Liu Ping Fan
  • [PATCH v3] powerpc: kvm: make _PAGE_NUMA take effect   Alexander Graf
    • [PATCH v3] powerpc: kvm: make _PAGE_NUMA take effect   Liu ping fan
      • [PATCH v3] powerpc: kvm: make _PAGE_NUMA take effect   Alexander Graf
      • [PATCH v3] powerpc: kvm: make _PAGE_NUMA take effect   liu ping fan
      • [PATCH v3] powerpc: kvm: make _PAGE_NUMA take effect   Alexander Graf
• [PATCH] ASoC: fsl_sai: Fix incorrect condition check in trigger()   Nicolin Chen
  • [PATCH] ASoC: fsl_sai: Fix incorrect condition check in trigger()   Mark Brown
    • [PATCH] ASoC: fsl_sai: Fix incorrect condition check in trigger()   Nicolin Chen
• [PATCH v2] gpio: ge: Convert to platform driver   Alexander Shiyan
  • [PATCH v2] gpio: ge: Convert to platform driver   Linus Walleij
• Change MINSIGSTKSZ and SIGSTKSIZE   Haren Myneni
  • Change MINSIGSTKSZ and SIGSTKSIZE   Alan Modra
• [PATCH 1/2] powerpc/mpc85xx: add two functions to get suspend state which is standby or mem   Dongsheng Wang
  • [PATCH 2/2] fsl/mpic_timer: make mpic_timer to support deep sleep feature   Dongsheng Wang
    • [PATCH 2/2] fsl/mpic_timer: make mpic_timer to support deep sleep feature   Scott Wood
      • [PATCH 2/2] fsl/mpic_timer: make mpic_timer to support deep sleep feature   Dongsheng.Wang at freescale.com
      • [PATCH 2/2] fsl/mpic_timer: make mpic_timer to support deep sleep feature   Scott Wood
      • [PATCH 2/2] fsl/mpic_timer: make mpic_timer to support deep sleep feature   Dongsheng.Wang at freescale.com
  • [PATCH 1/2] powerpc/mpc85xx: add two functions to get suspend state which is standby or mem   Scott Wood
    • [PATCH 1/2] powerpc/mpc85xx: add two functions to get suspend state which is standby or mem   Dongsheng.Wang at freescale.com
      • [PATCH 1/2] powerpc/mpc85xx: add two functions to get suspend state which is standby or mem   Scott Wood
• [PATCH 0/2] Phase out pci_enable_msi_block()   Alexander Gordeev
  • [PATCH 2/2] PCI/MSI: Phase out pci_enable_msi_block()   Alexander Gordeev
    • [PATCH 2/2] PCI/MSI: Phase out pci_enable_msi_block()   Alexander Gordeev
      • [PATCH 2/2] PCI/MSI: Phase out pci_enable_msi_block()   Alexander Gordeev
• [PATCH v2 00/15] powerpc/boot: 64bit little endian wrapper   Cédric Le Goater
  • [PATCH v2 02/15] powerpc/boot: use a common prom_args struct in oflib   Cédric Le Goater
  • [PATCH v2 03/15] powerpc/boot: use prom_arg_t in oflib   Cédric Le Goater
  • [PATCH v2 04/15] powerpc/boot: add byteswapping routines in oflib   Cédric Le Goater
  • [PATCH v2 05/15] powerpc/boot: add PROM_ERROR define in oflib   Cédric Le Goater
  • [PATCH v2 06/15] powerpc/boot: rework of_claim() to make it 64bit friendly   Cédric Le Goater
  • [PATCH v2 07/15] powerpc/boot: define typedef ihandle as u32   Cédric Le Goater
  • [PATCH v2 08/15] powerpc/boot: fix compile warning in 64bit   Cédric Le Goater
  • [PATCH v2 09/15] powerpc/boot: define byteswapping routines for little endian   Cédric Le Goater
  • [PATCH v2 10/15] powerpc/boot: add 64bit and little endian support to addnote   Cédric Le Goater
  • [PATCH v2 11/15] powerpc/boot: add little endian support to elf utils   Cédric Le Goater
  • [PATCH v2 12/15] powerpc/boot: define a routine to enter prom   Cédric Le Goater
  • [PATCH v2 13/15] powerpc/boot: modify entry point for 64bit   Cédric Le Goater
  • [PATCH v2 14/15] powerpc/boot: add a global entry point for pseries   Cédric Le Goater
  • [PATCH v2 15/15] powerpc/boot: add support for 64bit little endian wrapper   Cédric Le Goater
• [PATCH v2 01/15] powerpc/boot: fix do_div for 64bit wrapper   Cédric Le Goater
• [PATCH] powerpc: Fix error return in rtas_flash module init   Anton Blanchard
• [PATCH 1/3] powerpc: Rename duplicate COMMAND_LINE_SIZE define   Anton Blanchard
  • [PATCH 2/3] powerpc: Bump COMMAND_LINE_SIZE to 2048   Anton Blanchard
  • [PATCH 3/3] powerpc: Bump BOOT_COMMAND_LINE_SIZE to 2048   Anton Blanchard
• [PATCH] powerpc/85xx: Add OCA4080 board support   Martijn de Gouw
  • [PATCH] powerpc/85xx: Add OCA4080 board support   Scott Wood
    • [PATCH] powerpc/85xx: Add OCA4080 board support   Martijn de Gouw
      • [PATCH] powerpc/85xx: Add OCA4080 board support   Scott Wood
• [PATCH 1/1] powerpc: Increase COMMAND_LINE_SIZE to 2048 from 512.   Joseph Salisbury
  • [PATCH 1/1] powerpc: Increase COMMAND_LINE_SIZE to 2048 from 512.   Joseph Salisbury
    • [PATCH 1/1] powerpc: Increase COMMAND_LINE_SIZE to 2048 from 512.   Benjamin Herrenschmidt
      • [PATCH 1/1] powerpc: Increase COMMAND_LINE_SIZE to 2048 from 512.   Joseph Salisbury
• [PATCH 18/20] cpufreq: pasemi: Use cpufreq_for_each_entry macro for iteration   Stratos Karafotis
• [PATCH v4] Driver support for FSL RaidEngine device.   xuelin.shi at freescale.com
• [PATCH v2 1/2] fsl/corenet_generic: add a particular initialization for platform   Dongsheng Wang
  • [PATCH v2 1/2] fsl/corenet_generic: add a particular initialization for platform   Scott Wood
    • [PATCH v2 1/2] fsl/corenet_generic: add a particular initialization for platform   Dongsheng.Wang at freescale.com
      • [PATCH v2 1/2] fsl/corenet_generic: add a particular initialization for platform   Scott Wood
      • [PATCH v2 1/2] fsl/corenet_generic: add a particular initialization for platform   Dongsheng.Wang at freescale.com
      • [PATCH v2 1/2] fsl/corenet_generic: add a particular initialization for platform   Scott Wood
      • [PATCH v2 1/2] fsl/corenet_generic: add a particular initialization for platform   Scott Wood
• [PATCH v2 2/2] fsl/corenet_generic: add t104x platform diu special initialization   Dongsheng Wang
• [PATCH 1/2] fsl/pci: fix RC cannot detect PME message coming   Dongsheng Wang
  • [PATCH 2/2] fsl/pci: fix EP device sometimes hangup when system resume from sleep   Dongsheng Wang
    • [PATCH 2/2] fsl/pci: fix EP device sometimes hangup when system resume from sleep   Dongsheng.Wang at freescale.com
    • [PATCH 2/2] fsl/pci: fix EP device sometimes hangup when system resume from sleep   Scott Wood
• [PATCH v4] powerpc: kvm: make _PAGE_NUMA take effect   Liu Ping Fan
  • [PATCH v4] powerpc: kvm: make _PAGE_NUMA take effect   Alexander Graf
• [PATCH RFC v11 0/6] MPC512x DMA slave s/g support, OF DMA lookup   Alexander Popov
  • [PATCH RFC v11 1/6] dma: mpc512x: reorder mpc8308 specific instructions   Alexander Popov
  • [PATCH RFC v11 2/6] dma: mpc512x: add support for peripheral transfers   Alexander Popov
  • [PATCH RFC v11 3/6] dma: mpc512x: fix freeing resources in mpc_dma_probe() and mpc_dma_remove()   Alexander Popov
  • [PATCH RFC v11 4/6] dma: of: Add common xlate function for matching by channel id   Alexander Popov
  • [PATCH RFC v11 5/6] dma: mpc512x: add device tree binding document   Alexander Popov
    • [PATCH RFC v11 5/6] dma: mpc512x: add device tree binding document   Gerhard Sittig
      • [PATCH RFC v11 5/6] dma: mpc512x: add device tree binding document   Alexander Popov
      • [PATCH RFC v11 5/6] dma: mpc512x: add device tree binding document   Gerhard Sittig
  • [PATCH RFC v11 6/6] dma: mpc512x: register for device tree channel lookup   Alexander Popov
• Build regressions/improvements in v3.15-rc1   Geert Uytterhoeven
• [PATCH] powerpc/mm: Fix ".__node_distance" undefined   Mike Qiu
  • [PATCH] powerpc/mm: Fix ".__node_distance" undefined   Mike Qiu
• [PATCH v2 0/6] powerpc/perf/hv_{gpci,24x7}: fixes   Cody P Schafer
  • [PATCH v2 1/6] powerpc/perf/hv_24x7: probe errors changed to pr_debug(), padding fixed   Cody P Schafer
  • [PATCH v2 2/6] powerpc/perf/hv_gpci: probe failures use pr_debug(), and padding reduced   Cody P Schafer
  • [PATCH v2 3/6] powerpc/perf/hv-gpci: make device attr static   Cody P Schafer
  • [PATCH v2 4/6] powerpc/perf/hv-24x7: use (unsigned long) not (u32) values when calling plpar_hcall_norets()   Cody P Schafer
  • [PATCH v2 5/6] powerpc/perf/hv-24x7: remove [static 4096], sparse chokes on it   Cody P Schafer
  • [PATCH v2 6/6] powerpc/perf/hv-24x7: catalog version number is be64, not be32   Cody P Schafer
    • [PATCH v2 6/6] powerpc/perf/hv-24x7: catalog version number is be64, not be32   Benjamin Herrenschmidt
      • [PATCH v2 6/6] powerpc/perf/hv-24x7: catalog version number is be64, not be32   Cody P Schafer
      • [PATCH v2 6/6] powerpc/perf/hv-24x7: catalog version number is be64, not be32   Michael Ellerman
• [PATCHv2] powerpc/85xx: Add OCA4080 board support   Martijn de Gouw
• [PATCH v2 2/8] cpufreq: Use cpufreq_for_each_* macros for frequency table iteration   Stratos Karafotis
  • [PATCH v4 2/8] cpufreq: Use cpufreq_for_each_* macros for frequency table iteration   Stratos Karafotis
    • [PATCH v4 2/8] cpufreq: Use cpufreq_for_each_* macros for frequency table iteration   Prabhakar Lad
      • [PATCH v4 2/8] cpufreq: Use cpufreq_for_each_* macros for frequency table iteration   Stratos Karafotis
• [PATCH] mtd: m25p80: Modify the name of mtd_info   Brian Norris
  • [PATCH] mtd: m25p80: Modify the name of mtd_info   B48286 at freescale.com
• [v3] mtd: m25p80: Modify the name of mtd_info   Brian Norris
• Powerpc: e1000e cannot work normally after system resume from sleep(standby)   Dongsheng.Wang at freescale.com
• [PATCH 0/5] defconfigs: add MTD_SPI_NOR (dependency for M25P80)   Brian Norris
  • [PATCH 4/5] powerpc: defconfigs: add MTD_SPI_NOR (new dependency for M25P80)   Brian Norris
  • [PATCH 0/5] defconfigs: add MTD_SPI_NOR (dependency for M25P80)   Thierry Reding
    • [PATCH 0/5] defconfigs: add MTD_SPI_NOR (dependency for M25P80)   Brian Norris
      • [PATCH 0/5] defconfigs: add MTD_SPI_NOR (dependency for M25P80)   Marek Vasut
  • [PATCH 0/5] defconfigs: add MTD_SPI_NOR (dependency for M25P80)   Marek Vasut
• [PATCH 1/3] cpufreq: ppc: Add missing #include <asm/smp.h>   Geert Uytterhoeven
  • [PATCH 2/3] cpufreq: ppc: Fix integer overflow in expression   Geert Uytterhoeven
    • [PATCH 2/3] cpufreq: ppc: Fix integer overflow in expression   Viresh Kumar
  • [PATCH 3/3] cpufreq: ppc: Fix handling of non-existent clocks   Geert Uytterhoeven
    • [PATCH 3/3] cpufreq: ppc: Fix handling of non-existent clocks   Viresh Kumar
      • [PATCH 3/3] cpufreq: ppc: Fix handling of non-existent clocks   Geert Uytterhoeven
  • [PATCH 1/3] cpufreq: ppc: Add missing #include <asm/smp.h>   Viresh Kumar
• [PATCH 0/3] of: dts: enable memory at 0 quirk for PPC32 only   Rob Herring
  • [PATCH 0/3] of: dts: enable memory at 0 quirk for PPC32 only   Leif Lindholm
    • [PATCH 3/3] of: Handle memory at 0 node on PPC32 only   Leif Lindholm
  • [PATCH 0/3] of: dts: enable memory at 0 quirk for PPC32 only   Leif Lindholm
    • [PATCH 0/3] of: dts: enable memory at 0 quirk for PPC32 only   Rob Herring
      • [PATCH 0/3] of: dts: enable memory at 0 quirk for PPC32 only   Leif Lindholm
      • [PATCH 0/3] of: dts: enable memory at 0 quirk for PPC32 only   Rob Herring
      • [PATCH 0/3] of: dts: enable memory at 0 quirk for PPC32 only   Leif Lindholm
      • [PATCH 0/3] of: dts: enable memory at 0 quirk for PPC32 only   Grant Likely
      • [PATCH 0/3] of: dts: enable memory at 0 quirk for PPC32 only   Leif Lindholm
      • [PATCH 0/3] of: dts: enable memory at 0 quirk for PPC32 only   Grant Likely
      • [PATCH 0/3] of: dts: enable memory at 0 quirk for PPC32 only   Leif Lindholm
      • [PATCH 0/3] of: dts: enable memory at 0 quirk for PPC32 only   Grant Likely
• [PATCH 3/3] of: Handle memory at 0 node on PPC32 only   Geert Uytterhoeven
  • [PATCH 3/3] of: Handle memory at 0 node on PPC32 only   Leif Lindholm
    • [PATCH 3/3] of: Handle memory at 0 node on PPC32 only   Rob Herring
      • [PATCH 3/3] of: Handle memory at 0 node on PPC32 only   Mark Rutland
    • [PATCH 3/3] of: Handle memory at 0 node on PPC32 only   Grant Likely
      • [PATCH 3/3] of: Handle memory at 0 node on PPC32 only   Mark Rutland
      • [PATCH 3/3] of: Handle memory at 0 node on PPC32 only   Geert Uytterhoeven
      • [PATCH 3/3] of: Handle memory at 0 node on PPC32 only   Grant Likely
      • [PATCH 3/3] of: Handle memory at 0 node on PPC32 only   Leif Lindholm
  • [PATCH 3/3] of: Handle memory at 0 node on PPC32 only   Geert Uytterhoeven
• [PATCH v4 0/8] DMA: Freescale: driver cleanups and enhancements   hongbo.zhang at freescale.com
  • [PATCH v4 1/8] DMA: Freescale: remove the unnecessary FSL_DMA_LD_DEBUG   hongbo.zhang at freescale.com
  • [PATCH v4 2/8] DMA: Freescale: unify register access methods   hongbo.zhang at freescale.com
  • [PATCH v4 3/8] DMA: Freescale: remove attribute DMA_INTERRUPT of dmaengine   hongbo.zhang at freescale.com
  • [PATCH v4 4/8] DMA: Freescale: add fsl_dma_free_descriptor() to reduce code duplication   hongbo.zhang at freescale.com
  • [PATCH v4 5/8] DMA: Freescale: move functions to avoid forward declarations   hongbo.zhang at freescale.com
  • [PATCH v4 6/8] DMA: Freescale: change descriptor release process for supporting async_tx   hongbo.zhang at freescale.com
  • [PATCH v4 7/8] DMA: Freescale: use spin_lock_bh instead of spin_lock_irqsave   hongbo.zhang at freescale.com
  • [PATCH v4 8/8] DMA: Freescale: add suspend resume functions for DMA driver   hongbo.zhang at freescale.com
• [PATCH] powerpc/diu: adjust DIU initialization entry   Dongsheng Wang
• [PATCH 1/6] powerpc/corenet: Enable muxing MDIO buses via GPIO   Shruti Kanetkar
  • [PATCH 2/6] powerpc/corenet: Enable muxing MDIO buses via FPGA   Shruti Kanetkar
  • [PATCH 3/6] net/fsl_pq_mdio: Document supported compatibles   Shruti Kanetkar
  • [PATCH 4/6] powerpc/corenet: Create the dts components for the DPAA FMan   Shruti Kanetkar
    • [PATCH 4/6] powerpc/corenet: Create the dts components for the DPAA FMan   Scott Wood
  • [PATCH 5/6] powerpc/corenet: Add DPAA FMan support to the SoC device tree(s)   Shruti Kanetkar
    • [PATCH 5/6] powerpc/corenet: Add DPAA FMan support to the SoC device tree(s)   Scott Wood
  • [PATCH 6/6] powerpc/corenet: Add MDIO bus muxing support to the board device tree(s)   Shruti Kanetkar
• [PATCH v2] powerpc/fsl: Added binding for Freescale CoreNet coherency fabric (CCF)   Diana Craciun
  • [PATCH v2] powerpc/fsl: Added binding for Freescale CoreNet coherency fabric (CCF)   Scott Wood
    • [PATCH v2] powerpc/fsl: Added binding for Freescale CoreNet coherency fabric (CCF)   Diana Craciun
      • [PATCH v2] powerpc/fsl: Added binding for Freescale CoreNet coherency fabric (CCF)   Scott Wood
• [PATCH] powerpc/fsl: Updated device trees for platforms with corenet version 2   Diana Craciun
  • [PATCH] powerpc/fsl: Updated device trees for platforms with corenet version 2   Scott Wood
    • [PATCH] powerpc/fsl: Updated device trees for platforms with corenet version 2   Diana Craciun
• [PATCH] powerpc/mpc85xx: Remove P1023 RDS support   Lijun Pan
• [PATCH] powerpc: legacy_serial support MVME5100 UARTS with shifted registers   Stephen Chivers
• [RFC PATCH 1/2] usb: gadget: fsl_udc: Add support for zynq usb device controller   Punnaiah Choudary Kalluri
  • [RFC PATCH 1/2] usb: gadget: fsl_udc: Add support for zynq usb device controller   Punnaiah Choudary Kalluri
• [RFC PATCH 2/2] usb: ehci-fsl: Add support for zynq usb host controller   Punnaiah Choudary Kalluri
  • [RFC PATCH 2/2] usb: ehci-fsl: Add support for zynq usb host controller   Punnaiah Choudary Kalluri
• [RFC PATCH 0/2] usb: Reuse fsl driver code for synopsys usb controller   Greg KH
  • [RFC PATCH 0/2] usb: Reuse fsl driver code for synopsys usb controller   Punnaiah Choudary Kalluri
    • [RFC PATCH 0/2] usb: Reuse fsl driver code for synopsys usb controller   Punnaiah Choudary Kalluri
      • [RFC PATCH 0/2] usb: Reuse fsl driver code for synopsys usb controller   Felipe Balbi
  • [RFC PATCH 0/2] usb: Reuse fsl driver code for synopsys usb controller   Alan Stern
  • [RFC PATCH 0/2] usb: Reuse fsl driver code for synopsys usb controller   Marc Kleine-Budde
    • [RFC PATCH 0/2] usb: Reuse fsl driver code for synopsys usb controller   punnaiah choudary kalluri
• [PATCH 1/2] powerpc/powernv: clear the refcount for pci_dev on powernv platform   Wei Yang
  • [PATCH 1/2] powerpc/powernv: clear the refcount for pci_dev on powernv platform   Benjamin Herrenschmidt
    • [PATCH 1/2] powerpc/powernv: clear the refcount for pci_dev on powernv platform   Wei Yang
  • [PATCH 1/2] powerpc/powernv: clear the refcount for pci_dev on powernv platform   Gavin Shan
    • [PATCH 1/2] powerpc/powernv: clear the refcount for pci_dev on powernv platform   Wei Yang
      • [PATCH 1/2] powerpc/powernv: clear the refcount for pci_dev on powernv platform   Benjamin Herrenschmidt
      • [PATCH 1/2] powerpc/powernv: clear the refcount for pci_dev on powernv platform   Wei Yang
      • [PATCH 1/2] powerpc/powernv: clear the refcount for pci_dev on powernv platform   Gavin Shan
      • [PATCH 1/2] powerpc/powernv: clear the refcount for pci_dev on powernv platform   Benjamin Herrenschmidt
      • [PATCH 1/2] powerpc/powernv: clear the refcount for pci_dev on powernv platform   Wei Yang
• [PATCH 2/2] powerpc/powernc: revert part of commit d905c5df(PPC: POWERNV: move iommu_add_device earlier)   Wei Yang
  • [PATCH 2/2] powerpc/powernc: revert part of commit d905c5df(PPC: POWERNV: move iommu_add_device earlier)   Benjamin Herrenschmidt
    • [PATCH 2/2] powerpc/powernc: revert part of commit d905c5df(PPC: POWERNV: move iommu_add_device earlier)   Wei Yang
      • [PATCH 2/2] powerpc/powernc: revert part of commit d905c5df(PPC: POWERNV: move iommu_add_device earlier)   Wei Yang
• [PATCH] powerpc/mm: Fix tlbie to add AVAL fields for 64K pages   Aneesh Kumar K.V
  • [PATCH] powerpc/mm: Fix tlbie to add AVAL fields for 64K pages   Benjamin Herrenschmidt
    • [PATCH] powerpc/mm: Fix tlbie to add AVAL fields for 64K pages   Aneesh Kumar K.V
• [PATCH V4] mtd: m25p80: Modify the name of mtd_info   Hou Zhiqiang
  • [PATCH V4] mtd: m25p80: Modify the name of mtd_info   Huang Shijie
• [PATCH][v10] powerpc/mpc85xx:Add initial device tree support of T104x   Prabhakar Kushwaha
• [PATCH][v10] powerpc/fsl-booke: Add initial T104x_QDS board support   Prabhakar Kushwaha
• [PATCH 3/4] ARCH: AUDIT: implement syscall_get_arch for all arches   Stephen Rothwell
• [PATCH 1/6] powerpc/powernv: Use uint64_t instead of size_t in OPAL APIs   Anton Blanchard
  • [PATCH 2/6] powerpc/powernv: Remove some OPAL function declaration duplication   Anton Blanchard
  • [PATCH 3/6] powerpc/powernv: Fix little endian issues with opal_do_notifier calls   Anton Blanchard
  • [PATCH 4/6] powerpc/powernv: Fix little endian issues in OPAL error log code   Anton Blanchard
    • [PATCH 4/6] powerpc/powernv: Fix little endian issues in OPAL error log code   Vasant Hegde
  • [PATCH 5/6] powerpc/powernv: Create OPAL sglist helper functions and fix endian issues   Anton Blanchard
    • [PATCH 5/6] powerpc/powernv: Create OPAL sglist helper functions and fix endian issues   Vasant Hegde
      • [PATCH 5/6] powerpc/powernv: Create OPAL sglist helper functions and fix endian issues   Anton Blanchard
  • [PATCH 6/6] powerpc/powernv: Fix little endian issues in OPAL dump code   Anton Blanchard
    • [PATCH 6/6] powerpc/powernv: Fix little endian issues in OPAL dump code   Vasant Hegde
      • [PATCH 6/6] powerpc/powernv: Fix little endian issues in OPAL dump code   Anton Blanchard
      • [PATCH 6/6] powerpc/powernv: Fix little endian issues in OPAL dump code   Vasant Hegde
• [PATCH v4 0/3] Support of the kmcoge4 board   Valentin Longchamp
  • [PATCH v4 3/3] powerpc/mpc85xx: add support for Keymile's kmcoge4 board   Valentin Longchamp
• [PATCH v4 1/3] devicetree: bindings: add Zarlink to the vendor prefixes   Valentin Longchamp
• [PATCH v4 2/3] devcietree: bindings: add some MFD Keymile FPGAs   Valentin Longchamp
• questions on CONFIG_PPC_ADV_DEBUG_REGS, DBCR0_BRT, and DBCR0_ACTIVE_EVENTS   shiva7
  • questions on CONFIG_PPC_ADV_DEBUG_REGS, DBCR0_BRT, and DBCR0_ACTIVE_EVENTS   Scott Wood
    • questions on CONFIG_PPC_ADV_DEBUG_REGS, DBCR0_BRT, and DBCR0_ACTIVE_EVENTS   Scott Wood
• [PATCH 10/33] powerpc: Ignore TOC relocations   Anton Blanchard
• [PATCH v2 00/21] FDT clean-ups and libfdt support   Rob Herring
  • [PATCH v2 14/21] of/fdt: create common debugfs   Rob Herring
    • [PATCH v2 14/21] of/fdt: create common debugfs   Michal Simek
  • [PATCH v2 21/21] of: push struct boot_param_header and defines into powerpc   Rob Herring
    • [PATCH v2 21/21] of: push struct boot_param_header and defines into powerpc   Benjamin Herrenschmidt
  • [PATCH v2 00/21] FDT clean-ups and libfdt support   Michal Simek
  • [PATCH v2 00/21] FDT clean-ups and libfdt support   Max Filippov
  • [PATCH v2 00/21] FDT clean-ups and libfdt support   Grant Likely
  • [PATCH v2 00/21] FDT clean-ups and libfdt support   Stephen N Chivers
• [PATCH 1/2] powerpc/powernv: reduce multi-hit of iommu_add_device()   Wei Yang
  • [PATCH 2/2] powerpc/powernv: release the refcount for pci_dev   Wei Yang
  • [PATCH 1/2] powerpc/powernv: reduce multi-hit of iommu_add_device()   Alexey Kardashevskiy
    • [PATCH 1/2] powerpc/powernv: reduce multi-hit of iommu_add_device()   Wei Yang
      • [PATCH 1/2] powerpc/powernv: reduce multi-hit of iommu_add_device()   Alexey Kardashevskiy
      • [PATCH 1/2] powerpc/powernv: reduce multi-hit of iommu_add_device()   Wei Yang
      • [PATCH 1/2] powerpc/powernv: reduce multi-hit of iommu_add_device()   Alexey Kardashevskiy
      • [PATCH 1/2] powerpc/powernv: reduce multi-hit of iommu_add_device()   Wei Yang
      • [PATCH 1/2] powerpc/powernv: reduce multi-hit of iommu_add_device()   Gavin Shan
      • [PATCH 1/2] powerpc/powernv: reduce multi-hit of iommu_add_device()   Wei Yang
• [git pull] Please pull abiv2 branch   Anton Blanchard
  • [git pull] Please pull abiv2 branch   Philippe Bergheaud
    • [git pull] Please pull abiv2 branch   Alan Modra
    • [git pull] Please pull abiv2 branch   Rusty Russell
      • [git pull] Please pull abiv2 branch   Philippe Bergheaud
• [PATCH] net/phy: tune get_phy_c45_ids to support more c45 phy   Shengzhou Liu
  • [PATCH] net/phy: tune get_phy_c45_ids to support more c45 phy   Scott Wood
    • [PATCH] net/phy: tune get_phy_c45_ids to support more c45 phy   Shengzhou.Liu at freescale.com
• [PATCH RFC v12 0/7] MPC512x DMA slave s/g support, OF DMA lookup   Alexander Popov
  • [PATCH RFC v12 2/7] dma: mpc512x: separate 'compatible' values for MPC512x and MPC8308   Alexander Popov
  • [PATCH RFC v12 3/7] dma: mpc512x: add support for peripheral transfers   Alexander Popov
  • [PATCH RFC v12 4/7] dma: mpc512x: fix freeing resources in mpc_dma_probe() and mpc_dma_remove()   Alexander Popov
  • [PATCH RFC v12 5/7] dma: of: add common xlate function for matching by channel id   Alexander Popov
  • [PATCH RFC v12 6/7] dma: mpc512x: add device tree binding document   Alexander Popov
  • [PATCH RFC v12 7/7] dma: mpc512x: register for device tree channel lookup   Alexander Popov
  • [PATCH RFC v12 0/7] MPC512x DMA slave s/g support, OF DMA lookup   Alexander Popov
• [PATCH RFC v12 1/7] dma: mpc512x: reorder mpc8308 specific instructions   Alexander Popov
• [PATCH 00/38] MMC updates, plus CuBox-i WiFi support   Russell King - ARM Linux
  • [PATCH 09/38] mmc: sdhci: convert generic bus width setup to library function   Russell King
  • [PATCH 10/38] mmc: sdhci: convert reset into a library function   Russell King
  • [PATCH 17/38] mmc: sdhci: convert sdhci_set_clock() into a library function   Russell King
  • [PATCH 23/38] mmc: sdhci: convert sdhci_set_uhs_signaling() into a library function   Russell King
  • [PATCH 00/38] MMC updates, plus CuBox-i WiFi support   Ulf Hansson
    • [PATCH 00/38] MMC updates, plus CuBox-i WiFi support   Russell King - ARM Linux
      • [PATCH 00/38] MMC updates, plus CuBox-i WiFi support   Ulf Hansson
      • [PATCH 00/38] MMC updates, plus CuBox-i WiFi support   Russell King - ARM Linux
      • [PATCH 00/38] MMC updates, plus CuBox-i WiFi support   Ulf Hansson
      • [PATCH 00/38] MMC updates, plus CuBox-i WiFi support   Russell King - ARM Linux
      • [PATCH 00/38] MMC updates, plus CuBox-i WiFi support   Ulf Hansson
      • [PATCH 00/38] MMC updates, plus CuBox-i WiFi support   Russell King - ARM Linux
      • [PATCH 00/38] MMC updates, plus CuBox-i WiFi support   Ulf Hansson
  • [PATCH 00/38] MMC updates, plus CuBox-i WiFi support   Stephen Warren
    • [PATCH 00/38] MMC updates, plus CuBox-i WiFi support   Chris Ball
• [PATCH] powerpc/powernv: Fix little endian issues in OPAL flash code   Anton Blanchard
• [PATCH 0/6] Implement split core for POWER8   Michael Neuling
  • [PATCH 1/6] KVM: PPC: Book3S HV: Rework the secondary inhibit code   Michael Neuling
  • [PATCH 2/6] powerpc/powernv: Make it possible to skip the IRQHAPPENED check in power7_nap()   Michael Neuling
  • [PATCH 3/6] powerpc: Add threads_per_subcore   Michael Neuling
  • [PATCH 4/6] powerpc: Check cpu_thread_in_subcore() in __cpu_up()   Michael Neuling
  • [PATCH 5/6] KVM: PPC: Book3S HV: Use threads_per_subcore in KVM   Michael Neuling
  • [PATCH 6/6] powerpc/powernv: Add support for POWER8 split core on powernv   Michael Neuling
    • [PATCH 6/6] powerpc/powernv: Add support for POWER8 split core on powernv   Joel Stanley
      • [PATCH 6/6] powerpc/powernv: Add support for POWER8 split core on powernv   Michael Neuling
  • [PATCH 0/6] Implement split core for POWER8   Michael Neuling
    • [PATCH 0/6] Implement split core for POWER8   Alexander Graf
• [PATCH v2 1/2] powerpc/pm: add api to get suspend state which is STANDBY or MEM   Dongsheng Wang
  • [PATCH v2 1/2] powerpc/pm: add api to get suspend state which is STANDBY or MEM   Scott Wood
    • [PATCH v2 1/2] powerpc/pm: add api to get suspend state which is STANDBY or MEM   Leo Li
      • [PATCH v2 1/2] powerpc/pm: add api to get suspend state which is STANDBY or MEM   Scott Wood
      • [PATCH v2 1/2] powerpc/pm: add api to get suspend state which is STANDBY or MEM   Rafael J. Wysocki
• [PATCH v2 2/2] fsl/mpic_timer: make mpic_timer to support deep sleep feature   Dongsheng Wang
  • [PATCH v2 2/2] fsl/mpic_timer: make mpic_timer to support deep sleep feature   Scott Wood
• [PATCH] powerpc/powernv: Fix kexec races going back to OPAL   Benjamin Herrenschmidt
• [PATCH v2 00/15] powerpc/boot: 64bit little endian wrapper (rebased on v3.15-rc2)   Cédric Le Goater
  • [PATCH v2 01/15] powerpc/boot: fix do_div for 64bit wrapper   Cédric Le Goater
  • [PATCH v2 02/15] powerpc/boot: use a common prom_args struct in oflib   Cédric Le Goater
  • [PATCH v2 03/15] powerpc/boot: use prom_arg_t in oflib   Cédric Le Goater
  • [PATCH v2 04/15] powerpc/boot: add byteswapping routines in oflib   Cédric Le Goater
  • [PATCH v2 05/15] powerpc/boot: add PROM_ERROR define in oflib   Cédric Le Goater
  • [PATCH v2 06/15] powerpc/boot: rework of_claim() to make it 64bit friendly   Cédric Le Goater
  • [PATCH v2 07/15] powerpc/boot: define typedef ihandle as u32   Cédric Le Goater
  • [PATCH v2 08/15] powerpc/boot: fix compile warning in 64bit   Cédric Le Goater
  • [PATCH v2 09/15] powerpc/boot: define byteswapping routines for little endian   Cédric Le Goater
  • [PATCH v2 10/15] powerpc/boot: add 64bit and little endian support to addnote   Cédric Le Goater
  • [PATCH v2 11/15] powerpc/boot: add little endian support to elf utils   Cédric Le Goater
  • [PATCH v2 12/15] powerpc/boot: define a routine to enter prom   Cédric Le Goater
  • [PATCH v2 13/15] powerpc/boot: modify entry point for 64bit   Cédric Le Goater
  • [PATCH v2 14/15] powerpc/boot: add a global entry point for pseries   Cédric Le Goater
  • [PATCH v2 15/15] powerpc/boot: add support for 64bit little endian wrapper   Cédric Le Goater
• [PATCH 0/5] powerpc/powernv: OPAL sysparam sysfs fixes   Joel Stanley
  • [PATCH 1/5] powerpc/powernv: Fix sysparam sysfs error handling   Joel Stanley
  • [PATCH 2/5] powerpc/powernv: Use ssize_t for sysparam return values   Joel Stanley
  • [PATCH 3/5] powerpc/powernv: Check sysfs size before copying   Joel Stanley
  • [PATCH 4/5] powerpc/powernv: Fix typos in sysparam code   Joel Stanley
  • [PATCH 5/5] powerpc/powernv: Check sysparam size before creation   Joel Stanley
• [PATCH 00/25] EEH Enhancement and bug fixes   Gavin Shan
  • [PATCH 02/25] powerpc/powernv: Remove PNV_EEH_STATE_REMOVED   Gavin Shan
  • [PATCH 04/25] powerpc/powernv: Remove fields in PHB diag-data dump   Gavin Shan
  • [PATCH 05/25] powerpc/eeh: EEH_PE_ISOLATED not reflect HW state   Gavin Shan
  • [PATCH 06/25] powerpc/eeh: Block PCI-CFG access during PE reset   Gavin Shan
  • [PATCH 07/25] powerpc/powernv: Use EEH PCI config accessors   Gavin Shan
  • [PATCH 08/25] powerpc/eeh: Avoid I/O access during PE reset   Gavin Shan
  • [PATCH 09/25] powerpc/eeh: Cleanup eeh_gather_pci_data()   Gavin Shan
  • [PATCH 10/25] powerpc/eeh: Use cached capability for log dump   Gavin Shan
  • [PATCH 11/25] powerpc/eeh: Cleanup EEH subsystem variables   Gavin Shan
  • [PATCH 12/25] powerpc/eeh: Allow to disable EEH   Gavin Shan
  • [PATCH 13/25] powerpc/eeh: No hotplug on permanently removed dev   Gavin Shan
  • [PATCH 14/25] powerpc/powernv: Fix endless reporting frozen PE   Gavin Shan
  • [PATCH 15/25] powerpc/pseries: Fix overwritten PE state   Gavin Shan
  • [PATCH 16/25] powerpc/powernv: Reset root port in firmware   Gavin Shan
  • [PATCH 17/25] powerpc/eeh: Make the delay for PE reset unified   Gavin Shan
  • [PATCH 18/25] powerpc/pci: Mask linkDown on resetting PCI bus   Gavin Shan
  • [PATCH 19/25] powrpc/powernv: Reset PHB in kdump kernel   Gavin Shan
  • [PATCH 20/25] powerpc/eeh: Can't recover from non-PE-reset case   Gavin Shan
  • [PATCH 21/25] powerpc/powernv: Fundamental reset on PLX ports   Gavin Shan
  • [PATCH 22/25] powerpc/powernv: Missed IOMMU table type   Gavin Shan
  • [PATCH 23/25] powerpc/powernv: pci_domain_nr() not reliable   Gavin Shan
  • [PATCH 24/25] PCI: Fix return value from pci_user_{read, write}_config_*()   Gavin Shan
  • [PATCH 25/25] powerpc/prom: Stop scanning dev-tree for fdump early   Gavin Shan
• [PATCH 01/25] powerpc/eeh: Remove EEH_PE_PHB_DEAD   Gavin Shan
• [PATCH 03/25] powerpc/powernv: Move PNV_EEH_STATE_ENABLED around   Gavin Shan
• [PATCH 00/13] Refactor pci_is_brdige() to simplify code   Yijing Wang
  • [PATCH 02/13] PCI: Introduce new pci_is_bridge() helper function   Yijing Wang
  • [PATCH 03/13] PCI: Use new pci_is_bridge() to simplify code   Yijing Wang
  • [PATCH 07/13] sparc/PCI: Use new pci_is_bridge() to simplify code   Yijing Wang
    • [PATCH 07/13] sparc/PCI: Use new pci_is_bridge() to simplify code   David Miller
  • [PATCH 08/13] PCI, rpaphp: Use new pci_is_bridge() to simplify code   Yijing Wang
    • [PATCH 08/13] PCI, rpaphp: Use new pci_is_bridge() to simplify code   Benjamin Herrenschmidt
  • [PATCH 10/13] PCI, cpcihp: Use new pci_is_bridge() to simplify code   Yijing Wang
  • [PATCH 12/13] PCI, pcmcia: Use new pci_is_bridge() to simplify code   Yijing Wang
  • [PATCH 13/13] PCI, pciehp: Use new pci_is_bridge() to simplify code   Yijing Wang
  • [PATCH 00/13] Refactor pci_is_brdige() to simplify code   David Laight
    • [PATCH 00/13] Refactor pci_is_brdige() to simplify code   Yijing Wang
• [PATCH 01/13] PCI: rename pci_is_bridge() to pci_has_subordinate()   Yijing Wang
• [PATCH 04/13] x86/PCI: Use new pci_is_bridge() to simplify code   Yijing Wang
• [PATCH 05/13] IA64/PCI: Use new pci_is_bridge() to simplify code   Yijing Wang
• [PATCH 06/13] powerpc/PCI: Use new pci_is_bridge() to simplify code   Yijing Wang
• [PATCH 09/13] PCI, shpchp: Use new pci_is_bridge() to simplify code   Yijing Wang
• [PATCH 11/13] PCI, acpiphp: Use new pci_is_bridge() to simplify code   Yijing Wang
• [RFC PATCH] Fix Oops in rtas_stop_self()   Li Zhong
  • [RFC PATCH] Fix Oops in rtas_stop_self()   Anton Blanchard
    • [RFC PATCH] Fix Oops in rtas_stop_self()   Li Zhong
      • [RFC PATCH] Fix Oops in rtas_stop_self()   David Laight
      • [RFC PATCH] Fix Oops in rtas_stop_self()   Benjamin Herrenschmidt
    • [PATCH] powerpc: Fix Oops in rtas_stop_self()   Li Zhong
• [PATCH 1/2] powerpc: Allow ppc_md platform hook to override memory_block_size_bytes   Anton Blanchard
  • [PATCH 2/2] powerpc/powernv: Set memory_block_size_bytes to 256MB   Anton Blanchard
• [PATCH 22/32] mmc: sdhci: convert sdhci_set_uhs_signaling() into a library function   Russell King
• [PATCH v5 2/8] cpufreq: Use cpufreq_for_each_* macros for frequency table iteration   Stratos Karafotis
  • [PATCH v5 2/8] cpufreq: Use cpufreq_for_each_* macros for frequency table iteration   Prabhakar Lad
    • [PATCH v5 2/8] cpufreq: Use cpufreq_for_each_* macros for frequency table iteration   Stratos Karafotis
• [PATCH] powerpc: export flush_icache_range   Jeff Mahoney
• [PATCH V5] mtd: m25p80: modify the name of mtd_info   Hou Zhiqiang
• [PATCH V3 0/2] mm: FAULT_AROUND_ORDER patchset performance data for powerpc   Madhavan Srinivasan
  • [PATCH V3 1/2] mm: move FAULT_AROUND_ORDER to arch/   Madhavan Srinivasan
    • [PATCH V3 1/2] mm: move FAULT_AROUND_ORDER to arch/   Peter Zijlstra
      • [PATCH V3 1/2] mm: move FAULT_AROUND_ORDER to arch/   Madhavan Srinivasan
    • [PATCH V3 1/2] mm: move FAULT_AROUND_ORDER to arch/   Kirill A. Shutemov
      • [PATCH V3 1/2] mm: move FAULT_AROUND_ORDER to arch/   Madhavan Srinivasan
  • [PATCH V3 2/2] powerpc/pseries: init fault_around_order for pseries   Madhavan Srinivasan
    • [PATCH V3 2/2] powerpc/pseries: init fault_around_order for pseries   Rusty Russell
      • [PATCH V3 2/2] powerpc/pseries: init fault_around_order for pseries   Madhavan Srinivasan
    • [PATCH V3 2/2] powerpc/pseries: init fault_around_order for pseries   Ingo Molnar
      • [PATCH V3 2/2] powerpc/pseries: init fault_around_order for pseries   Madhavan Srinivasan
      • [PATCH V3 2/2] powerpc/pseries: init fault_around_order for pseries   Rusty Russell
      • [PATCH V3 2/2] powerpc/pseries: init fault_around_order for pseries   Madhavan Srinivasan
• [PATCH 1/2] powerpc/book3s: Improve machine check handling for unhandled errors   Mahesh J Salgaonkar
  • [PATCH 2/2] powerpc/book3s: Add stack overflow check in machine check handler.   Mahesh J Salgaonkar
• [PATCH] powerpc/book3s: Increment the mce counter during machine_check_early call.   Mahesh J Salgaonkar
• [PATCH] powerpc/book3s: Improve machine check delivery to guest.   Mahesh J Salgaonkar
• [PATCH 0/3][RFC][v1] kconfig: powerpc: Make COMMAND_LINE_SIZE a kernel config option. Increase COMMAND_LINE_SIZE for the powerpc architecture.   Joseph Salisbury
  • [PATCH 1/3][RFC][v1] kconfig: Change COMMAND_LINE_SIZE to a kernel config option, which is now set per architecture.   Joseph Salisbury
• [PATCH 2/3][RFC][v1] powerpc: Change the powerpc architecture to use Kconfig to set COMMAND_LINE_SIZE.   Joseph Salisbury
• [PATCH 3/3][RFC][v1] powerpc: kconfig: Increase the size of COMMAND_LINE_SIZE to 2048 from 512 for powerpc.   Joseph Salisbury
• [PATCH 1/1] powerpc: crtsaveres.o needed only when -Os flag is enabled   Ram Pai
  • [PATCH 1/1] powerpc: crtsaveres.o needed only when -Os flag is enabled   Brian W Hart
    • [PATCH 1/1] powerpc: crtsaveres.o needed only when -Os flag is enabled   Benjamin Herrenschmidt
• [PATCH] powerpc/fsl-rio: Fix fsl_rio_setup error paths and use-after-unmap   Scott Wood
  • [PATCH] powerpc/fsl-rio: Fix fsl_rio_setup error paths and use-after-unmap   Gang.Liu at freescale.com
    • [PATCH] powerpc/fsl-rio: Fix fsl_rio_setup error paths and use-after-unmap   Scott Wood
      • [PATCH] powerpc/fsl-rio: Fix fsl_rio_setup error paths and use-after-unmap   Gang.Liu at freescale.com
• [PATCH 1/2] ftrace: PPC, fix obsolete comment   Jiri Slaby
• [PATCH] powerpc/eeh: Dump PE location code   Gavin Shan
• [PATCH 0/2] Fix smp_processor_id() in preemptible splat   Paul Gortmaker
  • [PATCH 2/2] powerpc: fix smp_processor_id() in preemptible splat in set_breakpoint   Paul Gortmaker
• [PATCH 1/2] powerpc: drop return value from set_breakpoint as it is unused   Paul Gortmaker
• [PATCH] powerpc: memcpy optimization for 64bit LE   Anton Blanchard
  • [PATCH] powerpc: memcpy optimization for 64bit LE   Anton Blanchard
• [PATCH] powerpc 32: Provides VIRT_CPU_ACCOUNTING   Benjamin Herrenschmidt
• [PATCH 1/2] powerpc: mm: use macro PGTABLE_EADDR_SIZE instead of digital   Aneesh Kumar K.V
• [PATCH] powerpc: fix skipping call to early_init_fdt_scan_reserved_mem   Rob Herring
• [PATCH v2] powerpc: Add cpu family documentation   Michael Ellerman
• [PATCH] PPC: BOOK3S: Disable/Enable TM looking at the ibm, pa-features device tree entry   Aneesh Kumar K.V
• GNU binutils & PowerPC VLE   Martin Hinner

Last message date: Wed Apr 30 19:59:37 EST 2014
Archived on: Wed Apr 30 19:59:44 EST 2014

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...