[PATCH] mtd: m25p80: Modify the name of mtd_info
Brian Norris
computersforpeace at gmail.com
Wed Apr 16 16:48:00 EST 2014
On Fri, Mar 21, 2014 at 07:16:18PM +0800, Hou Zhiqiang wrote:
> To specify spi flash layouts by "mtdparts=..." in cmdline, we must
> give mtd_info a fixed name,because the cmdlinepart's parser will
> match the name of mtd_info given in cmdline.
> Now, if use DT, the mtd_info's name will be spi->dev->name. It
> consists of spi_master->bus_num, and the spi_master->bus_num maybe
> dynamically fetched. So, in this case, replace the component bus_num
> with thei physical address of spi master.
>
> Signed-off-by: Hou Zhiqiang <B48286 at freescale.com>
> ---
> drivers/mtd/devices/m25p80.c | 18 +++++++++++++++---
> 1 file changed, 15 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
> index 7eda71d..64450a2 100644
> --- a/drivers/mtd/devices/m25p80.c
> +++ b/drivers/mtd/devices/m25p80.c
> @@ -30,6 +30,7 @@
> #include <linux/mtd/cfi.h>
> #include <linux/mtd/mtd.h>
> #include <linux/mtd/partitions.h>
> +#include <linux/of_address.h>
> #include <linux/of_platform.h>
>
> #include <linux/spi/spi.h>
> @@ -934,9 +935,11 @@ static int m25p_probe(struct spi_device *spi)
> struct flash_platform_data *data;
> struct m25p *flash;
> struct flash_info *info;
> - unsigned i;
> + unsigned i, ret;
> struct mtd_part_parser_data ppdata;
> struct device_node *np = spi->dev.of_node;
> + struct resource res;
> + struct device_node *mnp = spi->master->dev.of_node;
>
> /* Platform data helps sort out which chip type we have, as
> * well as how this board partitions it. If we don't have
> @@ -1009,8 +1012,17 @@ static int m25p_probe(struct spi_device *spi)
>
> if (data && data->name)
> flash->mtd.name = data->name;
> - else
> - flash->mtd.name = dev_name(&spi->dev);
> + else{
> + ret = of_address_to_resource(mnp, 0, &res);
You're making a lot assumptions about the SPI master/device
relationship -- that the master has a device-node; that the first
resource of the master is its physical address (this is not guaranteed
by DT semantics). Please do not do this.
> + if (ret) {
> + dev_err(&spi->dev, "failed to get spi master resource\n");
> + return ret;
This is wrong. It breaks all !CONFIG_OF cases which didn't specify a
name via platform data.
> + }
> + flash->mtd.name = kasprintf(GFP_KERNEL, "spi%x.%d",
> + (unsigned)res.start, spi->chip_select);
> + if (!flash->mtd.name)
> + return -ENOMEM;
> + }
>
> flash->mtd.type = MTD_NORFLASH;
> flash->mtd.writesize = 1;
Brian
More information about the Linuxppc-dev
mailing list