[PATCH 22/25] powerpc/powernv: Missed IOMMU table type

[Gavin Shan]

In function pnv_pci_ioda2_setup_dma_pe(), the IOMMU table type is
set to (TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE) unconditionally.
It was just set to TCE_PCI by pnv_pci_setup_iommu_table(). So the
primary IOMMU table type (TCE_PCI) is lost. The patch fixes it.

Also, pnv_pci_setup_iommu_table() already set "tbl->it_busno" to
zero and we needn't do it again. The patch removes the redundant
assignment.

The patch also fixes similar issues in pnv_pci_ioda_setup_dma_pe().

Signed-off-by: Gavin Shan <gwshan at linux.vnet.ibm.com>
---
 arch/powerpc/platforms/powernv/pci-ioda.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 6a2cb37..1934327 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -665,12 +665,12 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
 		 * errors, and on the first pass the data will be a relative
 		 * bus number, print that out instead.
 		 */
-		tbl->it_busno = 0;
 		pe->tce_inval_reg_phys = be64_to_cpup(swinvp);
 		tbl->it_index = (unsigned long)ioremap(pe->tce_inval_reg_phys,
 				8);
-		tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE |
-			       TCE_PCI_SWINV_PAIR;
+		tbl->it_type |= (TCE_PCI_SWINV_CREATE |
+				 TCE_PCI_SWINV_FREE   |
+				 TCE_PCI_SWINV_PAIR);
 	}
 	iommu_init_table(tbl, phb->hose->node);
 	iommu_register_group(tbl, pci_domain_nr(pe->pbus), pe->pe_number);
@@ -795,11 +795,10 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
 		 * errors, and on the first pass the data will be a relative
 		 * bus number, print that out instead.
 		 */
-		tbl->it_busno = 0;
 		pe->tce_inval_reg_phys = be64_to_cpup(swinvp);
 		tbl->it_index = (unsigned long)ioremap(pe->tce_inval_reg_phys,
 				8);
-		tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE;
+		tbl->it_type |= (TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE);
 	}
 	iommu_init_table(tbl, phb->hose->node);
 	iommu_register_group(tbl, pci_domain_nr(pe->pbus), pe->pe_number);
-- 
1.8.3.2