April 2018 Archives by subject
Starting: Mon Apr 2 20:19:19 AEST 2018
Ending: Mon Apr 30 19:12:09 AEST 2018
Messages: 312
- [Skiboot] [PATCH-RESEND] phb4: Reset FIR/NFIR registers before PHB4 probe
Vaibhav Jain
- [Skiboot] [PATCH-RESEND] phb4: Reset FIR/NFIR registers before PHB4 probe
Benjamin Herrenschmidt
- [Skiboot] [PATCH-RESEND] phb4: Reset FIR/NFIR registers before PHB4 probe
Michael Neuling
- [Skiboot] [PATCH-RESEND] phb4: Reset FIR/NFIR registers before PHB4 probe
Vaibhav Jain
- [Skiboot] [PATCH-RESEND] phb4: Reset FIR/NFIR registers before PHB4 probe
Michael Neuling
- [Skiboot] [PATCH 0/3] Fix various FWTS device tree warnings
Stewart Smith
- [Skiboot] [PATCH 0/4] next round of OPAL debugging improvements
Nicholas Piggin
- [Skiboot] [PATCH 0/4] next round of OPAL debugging improvements
Stewart Smith
- [Skiboot] [PATCH 0/4] next round of OPAL debugging improvements
Nicholas Piggin
- [Skiboot] [PATCH 0/4] next round of OPAL debugging improvements
Stewart Smith
- [Skiboot] [PATCH 0/4] p9dsu platform updates
Stewart Smith
- [Skiboot] [PATCH 0/4] p9dsu platform updates
Stewart Smith
- [Skiboot] [PATCH 0/5] npu2-opencapi: Use presence detection and reset
Frederic Barrat
- [Skiboot] [PATCH 00/14] opal/hmi: Rework HMI handling.
Stewart Smith
- [Skiboot] [PATCH 00/15] libffs and ffspart rework
Stewart Smith
- [Skiboot] [PATCH 06/14] opal/hmi: Rework HMI handling of TFAC errors
Stewart Smith
- [Skiboot] [PATCH 1/2] astbmc: Add more slot table helpers
Oliver O'Halloran
- [Skiboot] [PATCH 1/2] core/test/run-trace: fix on ppc64el
Stewart Smith
- [Skiboot] [PATCH 1/2] core/test/run-trace: fix on ppc64el
Stewart Smith
- [Skiboot] [PATCH 1/2] core: Fix iteration condition to skip garded cpu
Vaidyanathan Srinivasan
- [Skiboot] [PATCH 1/2] core: Fix iteration condition to skip garded cpu
Nicholas Piggin
- [Skiboot] [PATCH 1/2] core: Fix iteration condition to skip garded cpu
Stewart Smith
- [Skiboot] [PATCH 1/2] hdata: Add 'primary' property to master chip xscom node
Vasant Hegde
- [Skiboot] [PATCH 1/2] npu2-opencapi: Fix 'link internal error' FIR, take 1
Andrew Donnellan
- [Skiboot] [PATCH 1/2] npu2-opencapi: Fix 'link internal error' FIR, take 1
Stewart Smith
- [Skiboot] [PATCH 1/2] opal:hmi: Add missing processor recovery reason string.
Mahesh J Salgaonkar
- [Skiboot] [PATCH 1/2] opal:hmi: Add missing processor recovery reason string.
Stewart Smith
- [Skiboot] [PATCH 1/2] pcie-slot: Don't fail powering on an already on switch
Benjamin Herrenschmidt
- [Skiboot] [PATCH 1/2] pcie-slot: Don't fail powering on an already on switch
Michael Neuling
- [Skiboot] [PATCH 1/2] pcie-slot: Don't fail powering on an already on switch
Stewart Smith
- [Skiboot] [PATCH 1/2] SLW: Remove stop1_lite and stop0 stop states
Akshay Adiga
- [Skiboot] [PATCH 1/3] core/pci: Set slot power limit when supported
Oliver O'Halloran
- [Skiboot] [PATCH 1/3] ibm, firmware-versions: add 'open-power' for backwards compat
Stewart Smith
- [Skiboot] [PATCH 1/3] ibm, firmware-versions: add 'open-power' for backwards compat
Vasant Hegde
- [Skiboot] [PATCH 1/3] ibm, firmware-versions: add 'open-power' for backwards compat
Stewart Smith
- [Skiboot] [PATCH 1/3] pci-dt-slot: Big ol' cleanup
Oliver O'Halloran
- [Skiboot] [PATCH 1/3] pci-dt-slot: Big ol' cleanup
Stewart Smith
- [Skiboot] [PATCH 1/4] core/stack: backtrace unwind basic OPAL call details
Nicholas Piggin
- [Skiboot] [PATCH 1/4] hdata/i2c: Ignore CFAM I2C master
Oliver O'Halloran
- [Skiboot] [PATCH 1/4] hdata/i2c: Ignore CFAM I2C master
Andrew Donnellan
- [Skiboot] [PATCH 1/4] hdata/i2c: Ignore CFAM I2C master
Stewart Smith
- [Skiboot] [PATCH 1/4] p9dsu: change esel command from AMI to IBM 0x3a.
Stewart Smith
- [Skiboot] [PATCH 1/5] npu2-opencapi: Use presence detection
Frederic Barrat
- [Skiboot] [PATCH 1/5] npu2-opencapi: Use presence detection
Andrew Donnellan
- [Skiboot] [PATCH 1/5] npu2-opencapi: Use presence detection
Frederic Barrat
- [Skiboot] [PATCH 1/5] npu2-opencapi: Use presence detection
Stewart Smith
- [Skiboot] [PATCH 2/2] Add SBE driver support
Vasant Hegde
- [Skiboot] [PATCH 2/2] Add SBE driver support
Benjamin Herrenschmidt
- [Skiboot] [PATCH 2/2] Add SBE driver support
Vasant Hegde
- [Skiboot] [PATCH 2/2] Add SBE driver support
Benjamin Herrenschmidt
- [Skiboot] [PATCH 2/2] Add SBE driver support
Vasant Hegde
- [Skiboot] [PATCH 2/2] core/fast-reboot: Increase timeout for dctl sreset to 1sec
Vaidyanathan Srinivasan
- [Skiboot] [PATCH 2/2] core/fast-reboot: Increase timeout for dctl sreset to 1sec
Nicholas Piggin
- [Skiboot] [PATCH 2/2] external/trace: fix makefile
Stewart Smith
- [Skiboot] [PATCH 2/2] npu2-opencapi: Fix 'link internal error' FIR, take 2
Andrew Donnellan
- [Skiboot] [PATCH 2/2] opal/hmi: Generate one event per core for processor recovery.
Mahesh J Salgaonkar
- [Skiboot] [PATCH 2/2] phb4: Quieten and improve "Timeout waiting for electrical link"
Benjamin Herrenschmidt
- [Skiboot] [PATCH 2/2] phb4: Quieten and improve "Timeout waiting for electrical link"
Michael Neuling
- [Skiboot] [PATCH 2/2] phb4: Quieten and improve "Timeout waiting for electrical link"
Stewart Smith
- [Skiboot] [PATCH 2/2] romulus: Add a barebones slot table
Oliver O'Halloran
- [Skiboot] [PATCH 2/2] romulus: Add a barebones slot table
Stewart Smith
- [Skiboot] [PATCH 2/2] SLW: Remove stop2_lite
Akshay Adiga
- [Skiboot] [PATCH 2/3] hdata/slots: Apply slot label to the parent slot
Oliver O'Halloran
- [Skiboot] [PATCH 2/3] hdata/spira: parse vpd to add part-number and serial-number to xscom@ node
Stewart Smith
- [Skiboot] [PATCH 2/3] hdata/spira: parse vpd to add part-number and serial-number to xscom@ node
Vasant Hegde
- [Skiboot] [PATCH 2/3] hdata/spira: parse vpd to add part-number and serial-number to xscom@ node
Stewart Smith
- [Skiboot] [PATCH 2/3] phb4: Enable the PCIe slotcap on pluggable slots
Oliver O'Halloran
- [Skiboot] [PATCH 2/4] asm/head: implement quiescing without stack or clobbering regs
Nicholas Piggin
- [Skiboot] [PATCH 2/4] hdata/i2c: Replace i2c_ prefix with dev_
Oliver O'Halloran
- [Skiboot] [PATCH 2/4] hdata/i2c: Replace i2c_ prefix with dev_
Andrew Donnellan
- [Skiboot] [PATCH 2/4] p9dsu HACK: fix system-vpd eeprom
Stewart Smith
- [Skiboot] [PATCH 2/5] npu2-opencapi: Rework adapter reset
Frederic Barrat
- [Skiboot] [PATCH 2/5] npu2-opencapi: Rework adapter reset
Andrew Donnellan
- [Skiboot] [PATCH 3/3] device-tree vpd/xscom@: add more VPD to xscom@ nodes
Stewart Smith
- [Skiboot] [PATCH 3/3] device-tree vpd/xscom@: add more VPD to xscom@ nodes
Vasant Hegde
- [Skiboot] [PATCH 3/3] device-tree vpd/xscom@: add more VPD to xscom@ nodes
Stewart Smith
- [Skiboot] [PATCH 3/3] device-tree vpd/xscom@: add more VPD to xscom@ nodes
Ananth N Mavinakayanahalli
- [Skiboot] [PATCH 3/3] npu2: Use ibm, loc-code rather than ibm, slot-label
Oliver O'Halloran
- [Skiboot] [PATCH 3/3] slots: Add power limit support
Oliver O'Halloran
- [Skiboot] [PATCH 3/4] core/opal: Emergency stack for re-entry
Nicholas Piggin
- [Skiboot] [PATCH 3/4] hdata/i2c: Ignore multi-port I2C devices
Oliver O'Halloran
- [Skiboot] [PATCH 3/4] hdata/i2c: Ignore multi-port I2C devices
Andrew Donnellan
- [Skiboot] [PATCH 3/4] p9dsu: add pci slot table for Boston LC 1U/2U and Boston LA/ESS.
Stewart Smith
- [Skiboot] [PATCH 3/5] npu2-opencapi: Train links on fundamental reset
Frederic Barrat
- [Skiboot] [PATCH 3/5] npu2-opencapi: Train links on fundamental reset
Andrew Donnellan
- [Skiboot] [PATCH 4/4] core/opal: Allow poller re-entry if OPAL was re-entered
Nicholas Piggin
- [Skiboot] [PATCH 4/4] hdata/i2c: Fix up pci hotplug labels
Oliver O'Halloran
- [Skiboot] [PATCH 4/4] p9dsu: add slot power limit.
Stewart Smith
- [Skiboot] [PATCH 4/5] npu2-opencapi: Cleanup traces printed during link training
Frederic Barrat
- [Skiboot] [PATCH 4/5] npu2-opencapi: Cleanup traces printed during link training
Andrew Donnellan
- [Skiboot] [PATCH 5/5] npu2-opencapi: Fix link state to report link down
Frederic Barrat
- [Skiboot] [PATCH 5/5] npu2-opencapi: Fix link state to report link down
Andrew Donnellan
- [Skiboot] [PATCH] asm/head: Fix comparison in opal_entry for switching to emergency
Vaibhav Jain
- [Skiboot] [PATCH] asm/head: Fix comparison in opal_entry for switching to emergency
Nicholas Piggin
- [Skiboot] [PATCH] asm/head: Fix comparison in opal_entry for switching to emergency
Stewart Smith
- [Skiboot] [PATCH] capi: Keep the current mmio windows in the mbt cache table.
Christophe Lombard
- [Skiboot] [PATCH] capi: Keep the current mmio windows in the mbt cache table.
Frederic Barrat
- [Skiboot] [PATCH] capi: Keep the current mmio windows in the mbt cache table.
Vaibhav Jain
- [Skiboot] [PATCH] core/cpu: Prevent clobbering of stack guard for boot-cpu
Vaibhav Jain
- [Skiboot] [PATCH] core/cpu: Prevent clobbering of stack guard for boot-cpu
Nicholas Piggin
- [Skiboot] [PATCH] core/cpu: Prevent clobbering of stack guard for boot-cpu
Stewart Smith
- [Skiboot] [PATCH] core/cpu: Prevent clobbering of stack guard for boot-cpu
Stewart Smith
- [Skiboot] [PATCH] core/cpufeatures: Fix setting DARN and SCV HWCAP feature bits
Nicholas Piggin
- [Skiboot] [PATCH] core/cpufeatures: Fix setting DARN and SCV HWCAP feature bits
Stewart Smith
- [Skiboot] [PATCH] core/lock.c: ensure valid start value for lock spin duration warning
Stewart Smith
- [Skiboot] [PATCH] core/pci-dt-slots: Fix devfn lookup
Oliver O'Halloran
- [Skiboot] [PATCH] core/pci-dt-slots: Fix devfn lookup
Stewart Smith
- [Skiboot] [PATCH] core/pci: Document some stuff
Oliver O'Halloran
- [Skiboot] [PATCH] core/pci: Document some stuff
Stewart Smith
- [Skiboot] [PATCH] core: Correctly load initramfs in stb container
Stewart Smith
- [Skiboot] [PATCH] Disable stop states from OPAL
Stewart Smith
- [Skiboot] [PATCH] Disable stop states from OPAL
Stewart Smith
- [Skiboot] [PATCH] doc: Document ibm,heartbeat-ms
Stewart Smith
- [Skiboot] [PATCH] doc: Document ibm,heartbeat-ms
Oliver
- [Skiboot] [PATCH] doc: Document ibm,heartbeat-ms
Stewart Smith
- [Skiboot] [PATCH] doc: Document ibm,heartbeat-ms
Stewart Smith
- [Skiboot] [PATCH] external/mambo: Add di command to decode instructions
Michael Neuling
- [Skiboot] [PATCH] external/mambo: Add di command to decode instructions
Balbir Singh
- [Skiboot] [PATCH] external/mambo: Add di command to decode instructions
Michael Neuling
- [Skiboot] [PATCH] external/mambo: Add di command to decode instructions
Stewart Smith
- [Skiboot] [PATCH] external/mambo: improve helper for machine checks
Nicholas Piggin
- [Skiboot] [PATCH] external/mambo: improve helper for machine checks
Balbir Singh
- [Skiboot] [PATCH] external/mambo: improve helper for machine checks
Stewart Smith
- [Skiboot] [PATCH] external: Add "lpc" tool
Benjamin Herrenschmidt
- [Skiboot] [PATCH] external: Add "lpc" tool
Stewart Smith
- [Skiboot] [PATCH] fast-reboot: parallel memory clearing
Stewart Smith
- [Skiboot] [PATCH] fast-reboot: parallel memory clearing
Nicholas Piggin
- [Skiboot] [PATCH] fast-reboot: parallel memory clearing
Stewart Smith
- [Skiboot] [PATCH] fast-reboot: parallel memory clearing
Nicholas Piggin
- [Skiboot] [PATCH] hdat/i2c.c: quieten "v2 found, parsing as v1"
Stewart Smith
- [Skiboot] [PATCH] hdat/i2c.c: quieten "v2 found, parsing as v1"
Stewart Smith
- [Skiboot] [PATCH] hdat_to_dt: hash_prop the same on all platforms
Stewart Smith
- [Skiboot] [PATCH] hdat_to_dt: hash_prop the same on all platforms
Stewart Smith
- [Skiboot] [PATCH] hdata/tpmrel: detect tpm not present by looking up the stinfo->status
Claudio Carvalho
- [Skiboot] [PATCH] hdata/tpmrel: detect tpm not present by looking up the stinfo->status
Stewart Smith
- [Skiboot] [PATCH] hdata: Add DIMM actual speed to device tree
Vasant Hegde
- [Skiboot] [PATCH] hdata: Add DIMM actual speed to device tree
Stewart Smith
- [Skiboot] [PATCH] hdata: Fix DIMM size property
Vasant Hegde
- [Skiboot] [PATCH] hdata: Fix DIMM size property
Stewart Smith
- [Skiboot] [PATCH] hw/imc: Add support to load imc catalog lid file
Madhavan Srinivasan
- [Skiboot] [PATCH] hw/imc: Add support to load imc catalog lid file
Stewart Smith
- [Skiboot] [PATCH] hw/imc: Check for pause_microcode_at_boot() return status
Madhavan Srinivasan
- [Skiboot] [PATCH] hw/imc: Check for pause_microcode_at_boot() return status
Anju T Sudhakar
- [Skiboot] [PATCH] hw/imc: Check for pause_microcode_at_boot() return status
Stewart Smith
- [Skiboot] [PATCH] hw/imc: Check for pause_microcode_at_boot() return status
Madhavan Srinivasan
- [Skiboot] [PATCH] hw/imc: Check for pause_microcode_at_boot() return status
Stewart Smith
- [Skiboot] [PATCH] hw/npu2.c: Remove static configuration of NPU2 register
Alistair Popple
- [Skiboot] [PATCH] hw/npu2.c: Remove static configuration of NPU2 register
Stewart Smith
- [Skiboot] [PATCH] hw/slw: Don't assert on a unknown chip
Oliver O'Halloran
- [Skiboot] [PATCH] interrupts: Create an "interrupts" property in the OPAL node
Benjamin Herrenschmidt
- [Skiboot] [PATCH] interrupts: Create an "interrupts" property in the OPAL node
Stewart Smith
- [Skiboot] [PATCH] ipmi: Sending a list of PCI devices via IPMI OEM messages
Artem Senichev
- [Skiboot] [PATCH] libflash/blocklevel: Add missing newline to debug messages
Pridhiviraj Paidipeddi
- [Skiboot] [PATCH] libflash/blocklevel: Add missing newline to debug messages
Stewart Smith
- [Skiboot] [PATCH] mambo/mambo_utils.tcl: Inject an MCE at a specified address
Balbir Singh
- [Skiboot] [PATCH] mambo/mambo_utils.tcl: Inject an MCE at a specified address
Nicholas Piggin
- [Skiboot] [PATCH] mambo/mambo_utils.tcl: Inject an MCE at a specified address
Balbir Singh
- [Skiboot] [PATCH] mambo/mambo_utils.tcl: Inject an MCE at a specified address
Nicholas Piggin
- [Skiboot] [PATCH] mambo: Add persistent memory disk support
Michael Neuling
- [Skiboot] [PATCH] mambo: Add persistent memory disk support
Stewart Smith
- [Skiboot] [PATCH] npu2/hw-procedures: fence bricks on GPU reset
Balbir Singh
- [Skiboot] [PATCH] npu2/hw-procedures: fence bricks on GPU reset
Alistair Popple
- [Skiboot] [PATCH] npu2/hw-procedures: fence bricks on GPU reset
Stewart Smith
- [Skiboot] [PATCH] npu2: Fix NPU<->GPU binding error message
Oliver O'Halloran
- [Skiboot] [PATCH] npu2: Fix NPU<->GPU binding error message
Reza Arbab
- [Skiboot] [PATCH] npu2: Fix NPU<->GPU binding error message
Oliver
- [Skiboot] [PATCH] npu2: Improve log output of GPU-to-link mapping
Reza Arbab
- [Skiboot] [PATCH] npu2: Improve log output of GPU-to-link mapping
Alistair Popple
- [Skiboot] [PATCH] npu2: Improve log output of GPU-to-link mapping
Stewart Smith
- [Skiboot] [PATCH] npu2: Move NPU2_XTS_BDF_MAP_VALID assignment to context init
Reza Arbab
- [Skiboot] [PATCH] npu2: Move NPU2_XTS_BDF_MAP_VALID assignment to context init
Stewart Smith
- [Skiboot] [PATCH] NX: Add NX coprocessor init opal call
Haren Myneni
- [Skiboot] [PATCH] occ: sensors-groups: Add DT properties to mark HWMON sensor groups
Stewart Smith
- [Skiboot] [PATCH] opal-prd: Insert powernv_flash module
Vasant Hegde
- [Skiboot] [PATCH] opal-prd: Insert powernv_flash module
Stewart Smith
- [Skiboot] [PATCH] opal/init: Fix VERSION hash calculation by Re-ordering inits
Pridhiviraj Paidipeddi
- [Skiboot] [PATCH] opal/init: Fix VERSION hash calculation by Re-ordering inits
Claudio Carvalho
- [Skiboot] [PATCH] OPAL_PCI_SET_POWER_STATE: fix locking in error paths
Stewart Smith
- [Skiboot] [PATCH] OPAL_PCI_SET_POWER_STATE: fix locking in error paths
Stewart Smith
- [Skiboot] [PATCH] p9dsu: detect p9dsu variant even when hostboot doesn't tell us
Stewart Smith
- [Skiboot] [PATCH] p9dsu: detect p9dsu variant even when hostboot doesn't tell us
Stewart Smith
- [Skiboot] [PATCH] phb4: Do not set the PBCQ Tunnel BAR register when enabling capi mode.
Philippe Bergheaud
- [Skiboot] [PATCH] phb4: Do not set the PBCQ Tunnel BAR register when enabling capi mode.
christophe lombard
- [Skiboot] [PATCH] phb4: Do not set the PBCQ Tunnel BAR register when enabling capi mode.
Stewart Smith
- [Skiboot] [PATCH] phb4: Minor CAPP init cleanup
Michael Neuling
- [Skiboot] [PATCH] phb4: Minor CAPP init cleanup
christophe lombard
- [Skiboot] [PATCH] phb4: Minor CAPP init cleanup
Michael Neuling
- [Skiboot] [PATCH] phb4: Minor CAPP init cleanup
christophe lombard
- [Skiboot] [PATCH] phb4: Reset FIR/NFIR registers before PHB4 probe
Vaibhav Jain
- [Skiboot] [PATCH] phb4: Restore bus numbers after CRS
Michael Neuling
- [Skiboot] [PATCH] phb4: Restore bus numbers after CRS
Stewart Smith
- [Skiboot] [PATCH] phb4: set TVT1 for tunneled operations in capi mode
Philippe Bergheaud
- [Skiboot] [PATCH] phb4: Update inits so cfg_wr_timeout is Fatal
Russell Currey
- [Skiboot] [PATCH] phb4: Update inits so cfg_wr_timeout is Fatal
Andrew Donnellan
- [Skiboot] [PATCH] phb4: Update inits so cfg_wr_timeout is Fatal
Russell Currey
- [Skiboot] [PATCH] sensors: Dont add DTS sensors when OCC inband sensors are available
Stewart Smith
- [Skiboot] [PATCH] travis: Enable ppc64le builds
Stewart Smith
- [Skiboot] [PATCH] travis: Enable ppc64le builds
Stewart Smith
- [Skiboot] [PATCH] uart: fix uart_opal_flush to take console lock over uart_con_flush
Nicholas Piggin
- [Skiboot] [PATCH] uart: fix uart_opal_flush to take console lock over uart_con_flush
Russell Currey
- [Skiboot] [PATCH] uart: fix uart_opal_flush to take console lock over uart_con_flush
Stewart Smith
- [Skiboot] [PATCH] uart: fix uart_opal_flush to take console lock over uart_con_flush
Nicholas Piggin
- [Skiboot] [PATCH] Update default stop-state-disable mask to cut only stop11
Vaidyanathan Srinivasan
- [Skiboot] [PATCH] xive: fix missing unlock in error path
Stewart Smith
- [Skiboot] [PATCH] xive: fix missing unlock in error path
Stewart Smith
- [Skiboot] [PATCH RESEND v6 0/2] Add SBE driver support
Vasant Hegde
- [Skiboot] [PATCH RESEND v6 0/2] Add SBE timer support
Vasant Hegde
- [Skiboot] [PATCH RESEND v6 1/2] Move P8 timer code to separate file
Vasant Hegde
- [Skiboot] [PATCH RESEND v6 2/2] SBE: Add timer support
Vasant Hegde
- [Skiboot] [PATCH RESEND v6 2/2] SBE: Add timer support
Benjamin Herrenschmidt
- [Skiboot] [PATCH RESEND v6 2/2] SBE: Add timer support
Vasant Hegde
- [Skiboot] [PATCH RESEND v6 2/2] SBE: Add timer support
Benjamin Herrenschmidt
- [Skiboot] [PATCH RESEND v6 2/2] SBE: Add timer support
Vasant Hegde
- [Skiboot] [PATCH v2 0/5] libflash blocklevel ECC corrections
Stewart Smith
- [Skiboot] [PATCH v2 00/15] opal/hmi: Rework HMI handling.
Mahesh J Salgaonkar
- [Skiboot] [PATCH v2 00/15] opal/hmi: Rework HMI handling.
Stewart Smith
- [Skiboot] [PATCH v2 01/15] opal/hmi: Don't re-read HMER multiple times
Mahesh J Salgaonkar
- [Skiboot] [PATCH v2 02/15] opal/hmi: Remove races in clearing HMER
Mahesh J Salgaonkar
- [Skiboot] [PATCH v2 03/15] opal/hmi: Add a new opal_handle_hmi2 that returns direct info to Linux
Mahesh J Salgaonkar
- [Skiboot] [PATCH v2 04/15] opal/hmi: Move timer related error handling to a separate function
Mahesh J Salgaonkar
- [Skiboot] [PATCH v2 05/15] opal/hmi: Don't bother passing HMER to pre-recovery cleanup
Mahesh J Salgaonkar
- [Skiboot] [PATCH v2 06/15] opal/hmi: Rework HMI handling of TFAC errors
Mahesh J Salgaonkar
- [Skiboot] [PATCH v2 07/15] opal/hmi: Initialize the hmi event with old value of HMER.
Mahesh J Salgaonkar
- [Skiboot] [PATCH v2 08/15] opal/hmi: Do not send HMI event if no errors are found.
Mahesh J Salgaonkar
- [Skiboot] [PATCH v2 09/15] opal/hmi: Fix soft lockups during TOD errors
Mahesh J Salgaonkar
- [Skiboot] [PATCH v2 1/3] core/pci: Set slot power limit when supported
Oliver O'Halloran
- [Skiboot] [PATCH v2 1/3] core/pci: Set slot power limit when supported
Stewart Smith
- [Skiboot] [PATCH v2 10/15] opal/hmi: Stop flooding HMI event for TOD errors.
Mahesh J Salgaonkar
- [Skiboot] [PATCH v2 11/15] opal/hmi: Fix handling of TFMR parity/corrupt error.
Mahesh J Salgaonkar
- [Skiboot] [PATCH v2 12/15] opal/hmi: Print additional debug information in rendezvous.
Mahesh J Salgaonkar
- [Skiboot] [PATCH v2 13/15] opal/hmi: check thread 0 tfmr to validate latched tfmr errors.
Mahesh J Salgaonkar
- [Skiboot] [PATCH v2 14/15] opal/hmi: Generate hmi event for recovered HDEC parity error.
Mahesh J Salgaonkar
- [Skiboot] [PATCH v2 15/15] opal/hmi: Add documentation for opal_handle_hmi2 call
Mahesh J Salgaonkar
- [Skiboot] [PATCH v2 2/3] phb4: Enable the PCIe slotcap on pluggable slots
Oliver O'Halloran
- [Skiboot] [PATCH v2 3/3] slots: Add power limit support
Oliver O'Halloran
- [Skiboot] [PATCH v2 4/9] powerpc/powernv: OPAL console standardise OPAL_BUSY loops
Nicholas Piggin
- [Skiboot] [PATCH v2 4/9] powerpc/powernv: OPAL console standardise OPAL_BUSY loops
Benjamin Herrenschmidt
- [Skiboot] [PATCH V2] capi: Keep the current mmio windows in the mbt cache table.
Christophe Lombard
- [Skiboot] [PATCH V2] capi: Keep the current mmio windows in the mbt cache table.
Vaibhav Jain
- [Skiboot] [PATCH V2] capi: Keep the current mmio windows in the mbt cache table.
christophe lombard
- [Skiboot] [PATCH V2] capi: Keep the current mmio windows in the mbt cache table.
Stewart Smith
- [Skiboot] [PATCH v2] hdata: Move 'HRMOR_BIT' macro to header file
Stewart Smith
- [Skiboot] [PATCH v2] hw/slw: Don't assert on a unknown chip
Oliver O'Halloran
- [Skiboot] [PATCH v2] hw/slw: Don't assert on a unknown chip
Stewart Smith
- [Skiboot] [PATCH v2] Makefile: Make it easier to find the docs
Joel Stanley
- [Skiboot] [PATCH v2] Makefile: Make it easier to find the docs
Stewart Smith
- [Skiboot] [PATCH v2] mambo/mambo_utils.tcl: Inject an MCE at a specified address
Balbir Singh
- [Skiboot] [PATCH v2] mambo/mambo_utils.tcl: Inject an MCE at a specified address
Nicholas Piggin
- [Skiboot] [PATCH v2] phb4: Reset FIR/NFIR registers before PHB4 probe
Vaibhav Jain
- [Skiboot] [PATCH v2] phb4: Reset FIR/NFIR registers before PHB4 probe
Russell Currey
- [Skiboot] [PATCH v2] phb4: Reset FIR/NFIR registers before PHB4 probe
Stewart Smith
- [Skiboot] [PATCH v2] phb4: set TVT1 for tunneled operations in capi mode
Philippe Bergheaud
- [Skiboot] [PATCH v2] phb4: set TVT1 for tunneled operations in capi mode
christophe lombard
- [Skiboot] [PATCH v2] phb4: set TVT1 for tunneled operations in capi mode
Stewart Smith
- [Skiboot] [PATCH v2] xive: disable store EOI support
Cédric Le Goater
- [Skiboot] [PATCH v3] mambo/mambo_utils.tcl: Inject an MCE at a specified address
Balbir Singh
- [Skiboot] [PATCH v3] mambo/mambo_utils.tcl: Inject an MCE at a specified address
Stewart Smith
- [Skiboot] [PATCH v3] xive: disable store EOI support
Cédric Le Goater
- [Skiboot] [PATCH v3] xive: disable store EOI support
Stewart Smith
- [Skiboot] [PATCH v4] capi: Poll Err/Status register during CAPP recovery
Stewart Smith
- [Skiboot] [PATCH v7 0/2] Add SBE driver support
Vasant Hegde
- [Skiboot] [PATCH v7 0/2] Add SBE timer support
Vasant Hegde
- [Skiboot] [PATCH v7 1/2] hdata: Add 'primary' property to master chip xscom node
Vasant Hegde
- [Skiboot] [PATCH v7 1/2] Move P8 timer code to separate file
Vasant Hegde
- [Skiboot] [PATCH v7 2/2] Add SBE driver support
Vasant Hegde
- [Skiboot] [PATCH v7 2/2] Add SBE driver support
Benjamin Herrenschmidt
- [Skiboot] [PATCH v7 2/2] Add SBE driver support
Vasant Hegde
- [Skiboot] [PATCH v7 2/2] Add SBE driver support
Benjamin Herrenschmidt
- [Skiboot] [PATCH v7 2/2] Add SBE driver support
Vasant Hegde
- [Skiboot] [PATCH v7 2/2] SBE: Add timer support
Vasant Hegde
- [Skiboot] [PATCH v7 2/2] SBE: Add timer support
Benjamin Herrenschmidt
- [Skiboot] [PATCH v7 2/2] SBE: Add timer support
Vasant Hegde
- [Skiboot] [PATCH v7 2/2] SBE: Add timer support
Benjamin Herrenschmidt
- [Skiboot] [PATCH v8 0/2] Add SBE driver support
Vasant Hegde
- [Skiboot] [PATCH v8 0/2] Add SBE timer support
Vasant Hegde
- [Skiboot] [PATCH v8 1/2] hdata: Add 'primary' property to master chip xscom node
Vasant Hegde
- [Skiboot] [PATCH v8 1/2] Move P8 timer code to separate file
Vasant Hegde
- [Skiboot] [PATCH v8 2/2] Add SBE driver support
Vasant Hegde
- [Skiboot] [PATCH v8 2/2] Add SBE driver support
Benjamin Herrenschmidt
- [Skiboot] [PATCH v8 2/2] Add SBE driver support
Vasant Hegde
- [Skiboot] [PATCH v8 2/2] Add SBE driver support
Benjamin Herrenschmidt
- [Skiboot] [PATCH v8 2/2] Add SBE driver support
Vasant Hegde
- [Skiboot] [PATCH v8 2/2] SBE: Add timer support
Vasant Hegde
- [Skiboot] [PATCH v9 0/2] Add SBE driver support
Vasant Hegde
- [Skiboot] [PATCH v9 0/2] Add SBE timer support
Vasant Hegde
- [Skiboot] [PATCH v9 1/2] hdata: Add 'primary' property to master chip xscom node
Vasant Hegde
- [Skiboot] [PATCH v9 1/2] Move P8 timer code to separate file
Vasant Hegde
- [Skiboot] [PATCH v9 2/2] Add SBE driver support
Vasant Hegde
- [Skiboot] [PATCH v9 2/2] SBE: Add timer support
Vasant Hegde
- [Skiboot] [RFC][PATCH] interrupts: Create an "interrupts" property in the OPAL node
Benjamin Herrenschmidt
- [Skiboot] [RFC PATCH 00/16] MPIPL support
Vasant Hegde
- [Skiboot] [RFC PATCH 01/16] FSP/MDST: Rename fsp-mdst-table.c -> fsp-sysdump.c
Vasant Hegde
- [Skiboot] [RFC PATCH 02/16] hdata: Fix MDST structure
Vasant Hegde
- [Skiboot] [RFC PATCH 03/16] hdata: Define MDDT and MDRT table
Vasant Hegde
- [Skiboot] [RFC PATCH 04/16] hdata: Setup memory for MDDT table
Vasant Hegde
- [Skiboot] [RFC PATCH 05/16] hdata: Setup memory for MDRT table
Vasant Hegde
- [Skiboot] [RFC PATCH 06/16] fadump: Define destination memory for boot crash
Vasant Hegde
- [Skiboot] [RFC PATCH 07/16] hdata: Add support for early OPAL crash
Vasant Hegde
- [Skiboot] [RFC PATCH 08/16] hdata: Adjust various structure offset after relocation
Vasant Hegde
- [Skiboot] [RFC PATCH 09/16] fadump: Define FADUMP structure
Vasant Hegde
- [Skiboot] [RFC PATCH 10/16] hdata: Create ibm,dump DT node
Vasant Hegde
- [Skiboot] [RFC PATCH 11/16] hdata: Add result table property to ibm, dump node
Vasant Hegde
- [Skiboot] [RFC PATCH 12/16] fadump: Add fw-source-table to ibm, dump node
Vasant Hegde
- [Skiboot] [RFC PATCH 13/16] fadump: Add OPAL API to register for fadump
Vasant Hegde
- [Skiboot] [RFC PATCH 14/16] fadump: Introduce new reboot type
Vasant Hegde
- [Skiboot] [RFC PATCH 15/16] dump: Send OPAL relocated base address to SBE
Vasant Hegde
- [Skiboot] [RFC PATCH 16/16] Add support to trigger memory preserving IPL on BMC system
Vasant Hegde
- [Skiboot] skiboot 5.10.4
Stewart Smith
- [Skiboot] skiboot 5.10.5
Stewart Smith
- [Skiboot] skiboot v5.11
Stewart Smith
- [Skiboot] skiboot v5.11
Andrew Jeffery
- [Skiboot] skiboot v5.11
Stewart Smith
Last message date:
Mon Apr 30 19:12:09 AEST 2018
Archived on: Mon Apr 30 19:12:31 AEST 2018
This archive was generated by
Pipermail 0.09 (Mailman edition).