[Skiboot] [PATCH 3/5] npu2-opencapi: Train links on fundamental reset
Frederic Barrat
fbarrat at linux.ibm.com
Thu Apr 12 22:45:24 AEST 2018
From: Frederic Barrat <fbarrat at linux.vnet.ibm.com>
Reorder our link training steps so that they are executed on
fundamental reset instead of during the initial setup. Skiboot always
call a fundamental reset on all the PHBs during pci init.
It is done through a state machine, similarly to what is done for
'real' PHBs.
This is the first step for a longer term goal to be able to trigger an
adapter reset from linux. We'll need the reset callbacks of the PHB to
be defined. We have to handle the various delays differently, since a
linux thread shouldn't stay stuck waiting in opal for too long.
No functional changes.
Signed-off-by: Frederic Barrat <fbarrat at linux.vnet.ibm.com>
---
hw/npu2-opencapi.c | 360 ++++++++++++++++++++++++++++++++++++-----------------
1 file changed, 247 insertions(+), 113 deletions(-)
diff --git a/hw/npu2-opencapi.c b/hw/npu2-opencapi.c
index be0707ea..a7a19190 100644
--- a/hw/npu2-opencapi.c
+++ b/hw/npu2-opencapi.c
@@ -58,6 +58,21 @@
#define TL_MAX_TEMPLATE 63
#define TL_RATE_BUF_SIZE 32
+#define OCAPI_SLOT_NORMAL PCI_SLOT_STATE_NORMAL
+#define OCAPI_SLOT_LINK PCI_SLOT_STATE_LINK
+#define OCAPI_SLOT_LINK_START (OCAPI_SLOT_LINK + 1)
+#define OCAPI_SLOT_LINK_WAIT (OCAPI_SLOT_LINK + 2)
+#define OCAPI_SLOT_LINK_TRAINED (OCAPI_SLOT_LINK + 3)
+#define OCAPI_SLOT_FRESET PCI_SLOT_STATE_FRESET
+#define OCAPI_SLOT_FRESET_START (OCAPI_SLOT_FRESET + 1)
+#define OCAPI_SLOT_FRESET_INIT (OCAPI_SLOT_FRESET + 2)
+#define OCAPI_SLOT_FRESET_ASSERT_DELAY (OCAPI_SLOT_FRESET + 3)
+#define OCAPI_SLOT_FRESET_DEASSERT_DELAY (OCAPI_SLOT_FRESET + 4)
+#define OCAPI_SLOT_FRESET_INIT_DELAY (OCAPI_SLOT_FRESET + 5)
+
+#define OCAPI_LINK_TRAINING_RETRIES 5
+#define OCAPI_LINK_TRAINING_TIMEOUT 3000 /* ms */
+
enum npu2_link_training_state {
NPU2_TRAIN_DEFAULT, /* fully train the link */
NPU2_TRAIN_PRBS31, /* used for Signal Integrity testing */
@@ -792,7 +807,7 @@ static void otl_enabletx(uint32_t gcid, uint32_t scom_base, uint64_t index)
/* TODO: Abort if credits are zero */
}
-static void reset_ocapi_device(struct npu2_dev *dev)
+static void assert_reset(struct npu2_dev *dev)
{
uint8_t pin, data;
int rc;
@@ -824,10 +839,7 @@ static void reset_ocapi_device(struct npu2_dev *dev)
if (rc)
goto err;
- /*
- * assert i2c reset for 5ms
- * register 1 controls the signal, reset is active low
- */
+ /* register 1 controls the signal, reset is active low */
data = ~pin;
rc = i2c_request_send(dev->i2c_port_id_ocapi,
platform.ocapi->i2c_reset_addr, SMBUS_WRITE,
@@ -835,20 +847,6 @@ static void reset_ocapi_device(struct npu2_dev *dev)
&data, sizeof(data), 120);
if (rc)
goto err;
- time_wait_ms(5);
-
- /*
- * deassert i2c reset and wait 5ms
- */
- data = 0xFF;
- rc = i2c_request_send(dev->i2c_port_id_ocapi,
- platform.ocapi->i2c_reset_addr, SMBUS_WRITE,
- 0x1, 1,
- &data, sizeof(data), 120);
- if (rc)
- goto err;
- time_wait_ms(5);
-
return;
err:
@@ -860,6 +858,26 @@ err:
prlog(PR_ERR, "OCAPI: Error writing I2C reset signal: %d\n", rc);
}
+static void deassert_reset(struct npu2_dev *dev)
+{
+ uint8_t data;
+ int rc;
+
+ data = 0xFF;
+ rc = i2c_request_send(dev->i2c_port_id_ocapi,
+ platform.ocapi->i2c_reset_addr, SMBUS_WRITE,
+ 0x1, 1,
+ &data, sizeof(data), 120);
+ if (rc) {
+ /**
+ * @fwts-label OCAPIDeviceResetFailed
+ * @fwts-advice There was an error attempting to send
+ * a reset signal over I2C to the OpenCAPI device.
+ */
+ prlog(PR_ERR, "OCAPI: Error writing I2C reset signal: %d\n", rc);
+ }
+}
+
static bool i2c_presence_detect(struct npu2_dev *dev)
{
uint8_t state, data;
@@ -898,13 +916,11 @@ static bool i2c_presence_detect(struct npu2_dev *dev)
return !(state & data);
}
-static int odl_train(uint32_t gcid, uint32_t index, struct npu2_dev *dev)
+static void reset_odl(uint32_t gcid, struct npu2_dev *dev)
{
uint64_t reg, config_xscom;
- int timeout = 3000;
- prlog(PR_DEBUG, "OCAPI: %s: Training ODL\n", __func__);
- switch (index) {
+ switch (dev->index) {
case 2:
config_xscom = OB0_ODL0_CONFIG;
break;
@@ -934,35 +950,60 @@ static int odl_train(uint32_t gcid, uint32_t index, struct npu2_dev *dev)
reg &= ~OB_ODL_CONFIG_RESET;
xscom_write(gcid, config_xscom, reg);
+}
- reset_ocapi_device(dev);
+static void set_init_pattern(uint32_t gcid, struct npu2_dev *dev)
+{
+ uint64_t reg, config_xscom;
+
+ switch (dev->index) {
+ case 2:
+ config_xscom = OB0_ODL0_CONFIG;
+ break;
+ case 3:
+ config_xscom = OB0_ODL1_CONFIG;
+ break;
+ case 4:
+ config_xscom = OB3_ODL1_CONFIG;
+ break;
+ case 5:
+ config_xscom = OB3_ODL0_CONFIG;
+ break;
+ default:
+ assert(false);
+ }
/* Transmit Pattern A */
+ xscom_read(gcid, config_xscom, ®);
reg = SETFIELD(OB_ODL_CONFIG_TRAIN_MODE, reg, 0b0001);
xscom_write(gcid, config_xscom, reg);
- time_wait_ms(5);
+}
- /* Bump lanes - this improves training reliability */
- npu2_opencapi_bump_ui_lane(dev);
+static void start_training(uint32_t gcid, struct npu2_dev *dev)
+{
+ uint64_t reg, config_xscom;
+
+ switch (dev->index) {
+ case 2:
+ config_xscom = OB0_ODL0_CONFIG;
+ break;
+ case 3:
+ config_xscom = OB0_ODL1_CONFIG;
+ break;
+ case 4:
+ config_xscom = OB3_ODL1_CONFIG;
+ break;
+ case 5:
+ config_xscom = OB3_ODL0_CONFIG;
+ break;
+ default:
+ assert(false);
+ }
/* Start training */
+ xscom_read(gcid, config_xscom, ®);
reg = SETFIELD(OB_ODL_CONFIG_TRAIN_MODE, reg, 0b1000);
xscom_write(gcid, config_xscom, reg);
-
- do {
- reg = get_odl_status(gcid, index);
- if (GETFIELD(OB_ODL_STATUS_TRAINING_STATE_MACHINE, reg) == 0x7) {
- prlog(PR_NOTICE,
- "OCAPI: Link %d on chip %u trained in %dms\n",
- index, gcid, 3000 - timeout);
- return OPAL_SUCCESS;
- }
- time_wait_ms(1);
- } while (timeout--);
- prlog(PR_INFO, "OCAPI: Link %d on chip %u failed to train, retrying\n",
- index, gcid);
- prlog(PR_INFO, "OCAPI: Link status: %016llx\n", reg);
- return OPAL_HARDWARE;
}
static int64_t npu2_opencapi_get_presence_state(struct pci_slot *slot,
@@ -1000,6 +1041,150 @@ static int64_t npu2_opencapi_get_link_state(struct pci_slot *slot, uint8_t *val)
return rc;
}
+static int64_t npu2_opencapi_retry_state(struct pci_slot *slot)
+{
+ struct npu2_dev *dev = phb_to_npu2_dev_ocapi(slot->phb);
+ uint32_t chip_id = dev->npu->chip_id;
+
+ if (!slot->link_retries--) {
+ /**
+ * @fwts-label OCAPILinkTrainingFailed
+ * @fwts-advice The OpenCAPI link training procedure failed.
+ * This indicates a hardware or firmware bug. OpenCAPI
+ * functionality will not be available on this link.
+ */
+ prlog(PR_ERR,
+ "OCAPI: Link %d on chip %u failed to train\n",
+ dev->index, chip_id);
+ prlog(PR_ERR, "OCAPI: Final link status: %016llx\n",
+ get_odl_status(chip_id, dev->index));
+ return OPAL_HARDWARE;
+ }
+
+ prlog(PR_ERR,
+ "OCAPI: Link %d on chip %u failed to train, retrying\n",
+ dev->index, chip_id);
+ pci_slot_set_state(slot, OCAPI_SLOT_FRESET_INIT);
+ return pci_slot_set_sm_timeout(slot, msecs_to_tb(1));
+}
+
+static int64_t npu2_opencapi_poll_link(struct pci_slot *slot)
+{
+ struct npu2_dev *dev = phb_to_npu2_dev_ocapi(slot->phb);
+ uint32_t chip_id = dev->npu->chip_id;
+ uint64_t reg;
+
+ switch (slot->state) {
+ case OCAPI_SLOT_NORMAL:
+ case OCAPI_SLOT_LINK_START:
+ prlog(PR_DEBUG, "OCAPI: LINK: Start polling\n");
+ pci_slot_set_state(slot, OCAPI_SLOT_LINK_WAIT);
+ /* fall-through */
+ case OCAPI_SLOT_LINK_WAIT:
+ reg = get_odl_status(chip_id, dev->index);
+ if (GETFIELD(OB_ODL_STATUS_TRAINING_STATE_MACHINE, reg) == 0x7) {
+ prlog(PR_NOTICE,
+ "OCAPI: Link %d on chip %u trained in %lld ms\n",
+ dev->index, chip_id,
+ OCAPI_LINK_TRAINING_TIMEOUT - slot->retries);
+ pci_slot_set_state(slot, OCAPI_SLOT_LINK_TRAINED);
+ return pci_slot_set_sm_timeout(slot, msecs_to_tb(1));
+ }
+ if (slot->retries-- == 0)
+ return npu2_opencapi_retry_state(slot);
+
+ return pci_slot_set_sm_timeout(slot, msecs_to_tb(1));
+
+ case OCAPI_SLOT_LINK_TRAINED:
+ otl_enabletx(chip_id, dev->npu->xscom_base, dev->index);
+ pci_slot_set_state(slot, OCAPI_SLOT_NORMAL);
+ return OPAL_SUCCESS;
+
+ default:
+ prlog(PR_ERR, "OCAPI: LINK: unexpected slot state %08x\n",
+ slot->state);
+
+ }
+ pci_slot_set_state(slot, OCAPI_SLOT_NORMAL);
+ return OPAL_HARDWARE;
+}
+
+static int64_t npu2_opencapi_creset(struct pci_slot *slot __unused)
+{
+ prlog(PR_ERR, "OCAPI: creset not supported\n");
+ return OPAL_UNSUPPORTED;
+}
+
+static int64_t npu2_opencapi_freset(struct pci_slot *slot)
+{
+ struct npu2_dev *dev = phb_to_npu2_dev_ocapi(slot->phb);
+ uint32_t chip_id = dev->npu->chip_id;
+ uint8_t presence = 1;
+
+ switch (slot->state) {
+ case OCAPI_SLOT_NORMAL:
+ case OCAPI_SLOT_FRESET_START:
+ prlog(PR_DEBUG, "OCAPI: FRESET: Starts\n");
+
+ if (slot->ops.get_presence_state)
+ slot->ops.get_presence_state(slot, &presence);
+ if (!presence) {
+ /*
+ * FIXME: if there's no card on the link, we
+ * should consider powering off the unused
+ * lanes to save energy
+ */
+ prlog(PR_INFO,
+ "OCAPI: no card detected on link %d, chip %d\n",
+ dev->index, chip_id);
+ return OPAL_SUCCESS;
+ }
+ slot->link_retries = OCAPI_LINK_TRAINING_RETRIES;
+ npu2_opencapi_phy_setup(dev);
+ /* fall-through */
+ case OCAPI_SLOT_FRESET_INIT:
+ reset_odl(chip_id, dev);
+ assert_reset(dev);
+ pci_slot_set_state(slot,
+ OCAPI_SLOT_FRESET_ASSERT_DELAY);
+ /* assert for 5ms */
+ return pci_slot_set_sm_timeout(slot, msecs_to_tb(5));
+
+ case OCAPI_SLOT_FRESET_ASSERT_DELAY:
+ deassert_reset(dev);
+ pci_slot_set_state(slot,
+ OCAPI_SLOT_FRESET_DEASSERT_DELAY);
+ /* give another 5ms to device to be ready */
+ return pci_slot_set_sm_timeout(slot, msecs_to_tb(5));
+
+ case OCAPI_SLOT_FRESET_DEASSERT_DELAY:
+ set_init_pattern(chip_id, dev);
+ pci_slot_set_state(slot,
+ OCAPI_SLOT_FRESET_INIT_DELAY);
+ return pci_slot_set_sm_timeout(slot, msecs_to_tb(5));
+
+ case OCAPI_SLOT_FRESET_INIT_DELAY:
+ /* Bump lanes - this improves training reliability */
+ npu2_opencapi_bump_ui_lane(dev);
+ start_training(chip_id, dev);
+ slot->retries = OCAPI_LINK_TRAINING_TIMEOUT;
+ pci_slot_set_state(slot, OCAPI_SLOT_LINK_START);
+ return slot->ops.poll_link(slot);
+
+ default:
+ prlog(PR_ERR, "OCAPI: FRESET: unexpected slot state %08x\n",
+ slot->state);
+ }
+ pci_slot_set_state(slot, OCAPI_SLOT_NORMAL);
+ return OPAL_HARDWARE;
+}
+
+static int64_t npu2_opencapi_hreset(struct pci_slot *slot __unused)
+{
+ prlog(PR_ERR, "OCAPI: hreset not supported\n");
+ return OPAL_UNSUPPORTED;
+}
+
static struct pci_slot *npu2_opencapi_slot_create(struct phb *phb)
{
struct pci_slot *slot;
@@ -1016,15 +1201,11 @@ static struct pci_slot *npu2_opencapi_slot_create(struct phb *phb)
slot->ops.get_latch_state = NULL;
slot->ops.set_power_state = NULL;
slot->ops.set_attention_state = NULL;
- /*
- * Temporarily erase the run_sm callback until we support
- * dynamic reset of the link. Otherwise, run_sm may call
- * freset, creset, ... and we don't define them. The run_sm
- * pointer is always tested before being called, at least at
- * the time of this writing :-) It will go away when we
- * implement dynamic reset of the link
- */
- slot->ops.run_sm = NULL;
+
+ slot->ops.poll_link = npu2_opencapi_poll_link;
+ slot->ops.creset = npu2_opencapi_creset;
+ slot->ops.freset = npu2_opencapi_freset;
+ slot->ops.hreset = npu2_opencapi_hreset;
return slot;
}
@@ -1345,48 +1526,22 @@ static int setup_irq(struct npu2 *p)
return 0;
}
-#define LINK_TRAINING_RETRIES 5
-
-static int train_link(int chip_id, struct npu2_dev *dev)
+static void setup_debug_training_state(struct npu2_dev *dev)
{
- bool train;
- int rc;
- int retries = LINK_TRAINING_RETRIES;
-
- if (platform.ocapi->force_presence)
- train = true;
- else
- train = i2c_presence_detect(dev);
- if (!train) {
- /*
- * FIXME: if there's no card on the link, we should consider
- * powering off the unused lanes to save energy
- */
- prlog(PR_INFO, "OCAPI: no card detected on link %d, chip %d\n",
- dev->index, chip_id);
- return -1;
- }
+ npu2_opencapi_phy_setup(dev);
- do {
- rc = odl_train(chip_id, dev->index, dev);
- } while (rc != OPAL_SUCCESS && --retries);
+ switch (npu2_ocapi_training_state) {
+ case NPU2_TRAIN_PRBS31:
+ prlog(PR_INFO, "OCAPI: sending PRBS31 pattern per NVRAM setting\n");
+ npu2_opencapi_phy_prbs31(dev);
+ break;
- if (rc != OPAL_SUCCESS && retries == 0) {
- /**
- * @fwts-label OCAPILinkTrainingFailed
- * @fwts-advice The OpenCAPI link training procedure failed.
- * This indicates a hardware or firmware bug. OpenCAPI
- * functionality will not be available on this link.
- */
- prlog(PR_ERR,
- "OCAPI: Link %d on chip %u failed to train\n",
- dev->index, chip_id);
- prlog(PR_ERR, "OCAPI: Final link status: %016llx\n",
- get_odl_status(chip_id, dev->index));
- return -1;
+ case NPU2_TRAIN_NONE:
+ prlog(PR_INFO, "OCAPI: link not trained per NVRAM setting\n");
+ break;
+ default:
+ assert(false);
}
-
- return 0;
}
static void npu2_opencapi_setup_device(struct dt_node *dn_link, struct npu2 *n,
@@ -1397,7 +1552,6 @@ static void npu2_opencapi_setup_device(struct dt_node *dn_link, struct npu2 *n,
struct pci_slot *slot;
char port_name[17];
uint64_t mm_win[2];
- int rc;
dev_index = dt_prop_get_u32(dn_link, "ibm,npu-link-index");
npu_index = dt_prop_get_u32(n->dt_node, "ibm,npu-index");
@@ -1480,22 +1634,9 @@ static void npu2_opencapi_setup_device(struct dt_node *dn_link, struct npu2 *n,
set_fence_control(n->chip_id, n->xscom_base, dev->index, 0b00);
- npu2_opencapi_phy_setup(dev);
-
- switch (npu2_ocapi_training_state) {
- case NPU2_TRAIN_PRBS31:
- prlog(PR_INFO,
- "OCAPI: Link %d sending PRBS31 pattern per NVRAM setting\n",
- dev->index);
- npu2_opencapi_phy_prbs31(dev);
- break;
-
- case NPU2_TRAIN_DEFAULT:
- rc = train_link(n->chip_id, dev);
- if (rc)
- goto failed;
-
- otl_enabletx(n->chip_id, n->xscom_base, dev->index);
+ if (npu2_ocapi_training_state != NPU2_TRAIN_DEFAULT) {
+ setup_debug_training_state(dev);
+ } else {
slot = npu2_opencapi_slot_create(&dev->phb_ocapi);
if (!slot) {
/**
@@ -1505,14 +1646,7 @@ static void npu2_opencapi_setup_device(struct dt_node *dn_link, struct npu2 *n,
*/
prlog(PR_ERR, "OCAPI: Cannot create PHB slot\n");
}
- break;
-
- case NPU2_TRAIN_NONE:
- prlog(PR_INFO, "OCAPI: Link %d not trained per NVRAM setting\n",
- dev->index);
- break;
}
-
pci_register_phb(&dev->phb_ocapi, OPAL_DYNAMIC_PHB_ID);
return;
failed:
--
2.14.1
More information about the Skiboot
mailing list