April 2018 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Mon Apr 2 20:19:19 AEST 2018
Ending: Mon Apr 30 19:12:09 AEST 2018
Messages: 312

• [Skiboot] [PATCH 1/2] SLW: Remove stop1_lite and stop0 stop states   Akshay Adiga
• [Skiboot] [PATCH 2/2] SLW: Remove stop2_lite   Akshay Adiga
• [Skiboot] [PATCH] npu2: Move NPU2_XTS_BDF_MAP_VALID assignment to context init   Reza Arbab
• [Skiboot] [PATCH] npu2: Improve log output of GPU-to-link mapping   Reza Arbab
• [Skiboot] [PATCH] npu2: Fix NPU<->GPU binding error message   Reza Arbab
• [Skiboot] [PATCH] capi: Keep the current mmio windows in the mbt cache table.   Frederic Barrat
• [Skiboot] [PATCH 0/5] npu2-opencapi: Use presence detection and reset   Frederic Barrat
• [Skiboot] [PATCH 1/5] npu2-opencapi: Use presence detection   Frederic Barrat
• [Skiboot] [PATCH 2/5] npu2-opencapi: Rework adapter reset   Frederic Barrat
• [Skiboot] [PATCH 3/5] npu2-opencapi: Train links on fundamental reset   Frederic Barrat
• [Skiboot] [PATCH 4/5] npu2-opencapi: Cleanup traces printed during link training   Frederic Barrat
• [Skiboot] [PATCH 5/5] npu2-opencapi: Fix link state to report link down   Frederic Barrat
• [Skiboot] [PATCH 1/5] npu2-opencapi: Use presence detection   Frederic Barrat
• [Skiboot] [PATCH] phb4: Do not set the PBCQ Tunnel BAR register when enabling capi mode.   Philippe Bergheaud
• [Skiboot] [PATCH] phb4: set TVT1 for tunneled operations in capi mode   Philippe Bergheaud
• [Skiboot] [PATCH v2] phb4: set TVT1 for tunneled operations in capi mode   Philippe Bergheaud
• [Skiboot] [PATCH] opal/init: Fix VERSION hash calculation by Re-ordering inits   Claudio Carvalho
• [Skiboot] [PATCH] hdata/tpmrel: detect tpm not present by looking up the stinfo->status   Claudio Carvalho
• [Skiboot] [PATCH v2] phb4: Reset FIR/NFIR registers before PHB4 probe   Russell Currey
• [Skiboot] [PATCH] uart: fix uart_opal_flush to take console lock over uart_con_flush   Russell Currey
• [Skiboot] [PATCH] phb4: Update inits so cfg_wr_timeout is Fatal   Russell Currey
• [Skiboot] [PATCH] phb4: Update inits so cfg_wr_timeout is Fatal   Russell Currey
• [Skiboot] [PATCH 1/2] npu2-opencapi: Fix 'link internal error' FIR, take 1   Andrew Donnellan
• [Skiboot] [PATCH 2/2] npu2-opencapi: Fix 'link internal error' FIR, take 2   Andrew Donnellan
• [Skiboot] [PATCH 4/5] npu2-opencapi: Cleanup traces printed during link training   Andrew Donnellan
• [Skiboot] [PATCH 5/5] npu2-opencapi: Fix link state to report link down   Andrew Donnellan
• [Skiboot] [PATCH 1/5] npu2-opencapi: Use presence detection   Andrew Donnellan
• [Skiboot] [PATCH 2/5] npu2-opencapi: Rework adapter reset   Andrew Donnellan
• [Skiboot] [PATCH 1/4] hdata/i2c: Ignore CFAM I2C master   Andrew Donnellan
• [Skiboot] [PATCH 2/4] hdata/i2c: Replace i2c_ prefix with dev_   Andrew Donnellan
• [Skiboot] [PATCH 3/4] hdata/i2c: Ignore multi-port I2C devices   Andrew Donnellan
• [Skiboot] [PATCH] phb4: Update inits so cfg_wr_timeout is Fatal   Andrew Donnellan
• [Skiboot] [PATCH 3/5] npu2-opencapi: Train links on fundamental reset   Andrew Donnellan
• [Skiboot] [PATCH v2] xive: disable store EOI support   Cédric Le Goater
• [Skiboot] [PATCH v3] xive: disable store EOI support   Cédric Le Goater
• [Skiboot] [PATCH RESEND v6 0/2] Add SBE driver support   Vasant Hegde
• [Skiboot] [PATCH 1/2] hdata: Add 'primary' property to master chip xscom node   Vasant Hegde
• [Skiboot] [PATCH 2/2] Add SBE driver support   Vasant Hegde
• [Skiboot] [PATCH RESEND v6 0/2] Add SBE timer support   Vasant Hegde
• [Skiboot] [PATCH RESEND v6 1/2] Move P8 timer code to separate file   Vasant Hegde
• [Skiboot] [PATCH RESEND v6 2/2] SBE: Add timer support   Vasant Hegde
• [Skiboot] [RFC PATCH 00/16] MPIPL support   Vasant Hegde
• [Skiboot] [RFC PATCH 01/16] FSP/MDST: Rename fsp-mdst-table.c -> fsp-sysdump.c   Vasant Hegde
• [Skiboot] [RFC PATCH 02/16] hdata: Fix MDST structure   Vasant Hegde
• [Skiboot] [RFC PATCH 03/16] hdata: Define MDDT and MDRT table   Vasant Hegde
• [Skiboot] [RFC PATCH 04/16] hdata: Setup memory for MDDT table   Vasant Hegde
• [Skiboot] [RFC PATCH 05/16] hdata: Setup memory for MDRT table   Vasant Hegde
• [Skiboot] [RFC PATCH 06/16] fadump: Define destination memory for boot crash   Vasant Hegde
• [Skiboot] [RFC PATCH 07/16] hdata: Add support for early OPAL crash   Vasant Hegde
• [Skiboot] [RFC PATCH 08/16] hdata: Adjust various structure offset after relocation   Vasant Hegde
• [Skiboot] [RFC PATCH 09/16] fadump: Define FADUMP structure   Vasant Hegde
• [Skiboot] [RFC PATCH 10/16] hdata: Create ibm,dump DT node   Vasant Hegde
• [Skiboot] [RFC PATCH 11/16] hdata: Add result table property to ibm, dump node   Vasant Hegde
• [Skiboot] [RFC PATCH 12/16] fadump: Add fw-source-table to ibm, dump node   Vasant Hegde
• [Skiboot] [RFC PATCH 13/16] fadump: Add OPAL API to register for fadump   Vasant Hegde
• [Skiboot] [RFC PATCH 14/16] fadump: Introduce new reboot type   Vasant Hegde
• [Skiboot] [RFC PATCH 15/16] dump: Send OPAL relocated base address to SBE   Vasant Hegde
• [Skiboot] [RFC PATCH 16/16] Add support to trigger memory preserving IPL on BMC system   Vasant Hegde
• [Skiboot] [PATCH] opal-prd: Insert powernv_flash module   Vasant Hegde
• [Skiboot] [PATCH 1/3] ibm, firmware-versions: add 'open-power' for backwards compat   Vasant Hegde
• [Skiboot] [PATCH 2/3] hdata/spira: parse vpd to add part-number and serial-number to xscom@ node   Vasant Hegde
• [Skiboot] [PATCH 3/3] device-tree vpd/xscom@: add more VPD to xscom@ nodes   Vasant Hegde
• [Skiboot] [PATCH] hdata: Add DIMM actual speed to device tree   Vasant Hegde
• [Skiboot] [PATCH] hdata: Fix DIMM size property   Vasant Hegde
• [Skiboot] [PATCH 2/2] Add SBE driver support   Vasant Hegde
• [Skiboot] [PATCH 2/2] Add SBE driver support   Vasant Hegde
• [Skiboot] [PATCH RESEND v6 2/2] SBE: Add timer support   Vasant Hegde
• [Skiboot] [PATCH v7 0/2] Add SBE driver support   Vasant Hegde
• [Skiboot] [PATCH v7 1/2] hdata: Add 'primary' property to master chip xscom node   Vasant Hegde
• [Skiboot] [PATCH v7 2/2] Add SBE driver support   Vasant Hegde
• [Skiboot] [PATCH v7 0/2] Add SBE timer support   Vasant Hegde
• [Skiboot] [PATCH v7 1/2] Move P8 timer code to separate file   Vasant Hegde
• [Skiboot] [PATCH v7 2/2] SBE: Add timer support   Vasant Hegde
• [Skiboot] [PATCH v7 2/2] Add SBE driver support   Vasant Hegde
• [Skiboot] [PATCH v7 2/2] SBE: Add timer support   Vasant Hegde
• [Skiboot] [PATCH RESEND v6 2/2] SBE: Add timer support   Vasant Hegde
• [Skiboot] [PATCH v7 2/2] Add SBE driver support   Vasant Hegde
• [Skiboot] [PATCH v8 0/2] Add SBE driver support   Vasant Hegde
• [Skiboot] [PATCH v8 1/2] hdata: Add 'primary' property to master chip xscom node   Vasant Hegde
• [Skiboot] [PATCH v8 2/2] Add SBE driver support   Vasant Hegde
• [Skiboot] [PATCH v8 0/2] Add SBE timer support   Vasant Hegde
• [Skiboot] [PATCH v8 1/2] Move P8 timer code to separate file   Vasant Hegde
• [Skiboot] [PATCH v8 2/2] SBE: Add timer support   Vasant Hegde
• [Skiboot] [PATCH v8 2/2] Add SBE driver support   Vasant Hegde
• [Skiboot] [PATCH v8 2/2] Add SBE driver support   Vasant Hegde
• [Skiboot] [PATCH v9 0/2] Add SBE driver support   Vasant Hegde
• [Skiboot] [PATCH v9 1/2] hdata: Add 'primary' property to master chip xscom node   Vasant Hegde
• [Skiboot] [PATCH v9 2/2] Add SBE driver support   Vasant Hegde
• [Skiboot] [PATCH v9 0/2] Add SBE timer support   Vasant Hegde
• [Skiboot] [PATCH v9 1/2] Move P8 timer code to separate file   Vasant Hegde
• [Skiboot] [PATCH v9 2/2] SBE: Add timer support   Vasant Hegde
• [Skiboot] [PATCH-RESEND] phb4: Reset FIR/NFIR registers before PHB4 probe   Benjamin Herrenschmidt
• [Skiboot] [PATCH 1/2] pcie-slot: Don't fail powering on an already on switch   Benjamin Herrenschmidt
• [Skiboot] [PATCH 2/2] phb4: Quieten and improve "Timeout waiting for electrical link"   Benjamin Herrenschmidt
• [Skiboot] [RFC][PATCH] interrupts: Create an "interrupts" property in the OPAL node   Benjamin Herrenschmidt
• [Skiboot] [PATCH v2 4/9] powerpc/powernv: OPAL console standardise OPAL_BUSY loops   Benjamin Herrenschmidt
• [Skiboot] [PATCH] interrupts: Create an "interrupts" property in the OPAL node   Benjamin Herrenschmidt
• [Skiboot] [PATCH 2/2] Add SBE driver support   Benjamin Herrenschmidt
• [Skiboot] [PATCH RESEND v6 2/2] SBE: Add timer support   Benjamin Herrenschmidt
• [Skiboot] [PATCH 2/2] Add SBE driver support   Benjamin Herrenschmidt
• [Skiboot] [PATCH RESEND v6 2/2] SBE: Add timer support   Benjamin Herrenschmidt
• [Skiboot] [PATCH v7 2/2] Add SBE driver support   Benjamin Herrenschmidt
• [Skiboot] [PATCH v7 2/2] SBE: Add timer support   Benjamin Herrenschmidt
• [Skiboot] [PATCH v7 2/2] Add SBE driver support   Benjamin Herrenschmidt
• [Skiboot] [PATCH v7 2/2] SBE: Add timer support   Benjamin Herrenschmidt
• [Skiboot] [PATCH] external: Add "lpc" tool   Benjamin Herrenschmidt
• [Skiboot] [PATCH v8 2/2] Add SBE driver support   Benjamin Herrenschmidt
• [Skiboot] [PATCH v8 2/2] Add SBE driver support   Benjamin Herrenschmidt
• [Skiboot] [PATCH] phb4: Reset FIR/NFIR registers before PHB4 probe   Vaibhav Jain
• [Skiboot] [PATCH-RESEND] phb4: Reset FIR/NFIR registers before PHB4 probe   Vaibhav Jain
• [Skiboot] [PATCH-RESEND] phb4: Reset FIR/NFIR registers before PHB4 probe   Vaibhav Jain
• [Skiboot] [PATCH v2] phb4: Reset FIR/NFIR registers before PHB4 probe   Vaibhav Jain
• [Skiboot] [PATCH] capi: Keep the current mmio windows in the mbt cache table.   Vaibhav Jain
• [Skiboot] [PATCH] core/cpu: Prevent clobbering of stack guard for boot-cpu   Vaibhav Jain
• [Skiboot] [PATCH V2] capi: Keep the current mmio windows in the mbt cache table.   Vaibhav Jain
• [Skiboot] [PATCH] asm/head: Fix comparison in opal_entry for switching to emergency   Vaibhav Jain
• [Skiboot] skiboot v5.11   Andrew Jeffery
• [Skiboot] [PATCH] capi: Keep the current mmio windows in the mbt cache table.   Christophe Lombard
• [Skiboot] [PATCH V2] capi: Keep the current mmio windows in the mbt cache table.   Christophe Lombard
• [Skiboot] [PATCH 3/3] device-tree vpd/xscom@: add more VPD to xscom@ nodes   Ananth N Mavinakayanahalli
• [Skiboot] [PATCH] NX: Add NX coprocessor init opal call   Haren Myneni
• [Skiboot] [PATCH-RESEND] phb4: Reset FIR/NFIR registers before PHB4 probe   Michael Neuling
• [Skiboot] [PATCH-RESEND] phb4: Reset FIR/NFIR registers before PHB4 probe   Michael Neuling
• [Skiboot] [PATCH 1/2] pcie-slot: Don't fail powering on an already on switch   Michael Neuling
• [Skiboot] [PATCH 2/2] phb4: Quieten and improve "Timeout waiting for electrical link"   Michael Neuling
• [Skiboot] [PATCH] phb4: Restore bus numbers after CRS   Michael Neuling
• [Skiboot] [PATCH] phb4: Minor CAPP init cleanup   Michael Neuling
• [Skiboot] [PATCH] external/mambo: Add di command to decode instructions   Michael Neuling
• [Skiboot] [PATCH] phb4: Minor CAPP init cleanup   Michael Neuling
• [Skiboot] [PATCH] external/mambo: Add di command to decode instructions   Michael Neuling
• [Skiboot] [PATCH] mambo: Add persistent memory disk support   Michael Neuling
• [Skiboot] [PATCH 1/3] core/pci: Set slot power limit when supported   Oliver O'Halloran
• [Skiboot] [PATCH 2/3] phb4: Enable the PCIe slotcap on pluggable slots   Oliver O'Halloran
• [Skiboot] [PATCH 3/3] slots: Add power limit support   Oliver O'Halloran
• [Skiboot] [PATCH] core/pci: Document some stuff   Oliver O'Halloran
• [Skiboot] [PATCH 1/2] astbmc: Add more slot table helpers   Oliver O'Halloran
• [Skiboot] [PATCH 2/2] romulus: Add a barebones slot table   Oliver O'Halloran
• [Skiboot] [PATCH v2 1/3] core/pci: Set slot power limit when supported   Oliver O'Halloran
• [Skiboot] [PATCH v2 2/3] phb4: Enable the PCIe slotcap on pluggable slots   Oliver O'Halloran
• [Skiboot] [PATCH v2 3/3] slots: Add power limit support   Oliver O'Halloran
• [Skiboot] [PATCH] npu2: Fix NPU<->GPU binding error message   Oliver O'Halloran
• [Skiboot] [PATCH 1/3] pci-dt-slot: Big ol' cleanup   Oliver O'Halloran
• [Skiboot] [PATCH 2/3] hdata/slots: Apply slot label to the parent slot   Oliver O'Halloran
• [Skiboot] [PATCH 3/3] npu2: Use ibm, loc-code rather than ibm, slot-label   Oliver O'Halloran
• [Skiboot] [PATCH 1/4] hdata/i2c: Ignore CFAM I2C master   Oliver O'Halloran
• [Skiboot] [PATCH 2/4] hdata/i2c: Replace i2c_ prefix with dev_   Oliver O'Halloran
• [Skiboot] [PATCH 3/4] hdata/i2c: Ignore multi-port I2C devices   Oliver O'Halloran
• [Skiboot] [PATCH 4/4] hdata/i2c: Fix up pci hotplug labels   Oliver O'Halloran
• [Skiboot] [PATCH] core/pci-dt-slots: Fix devfn lookup   Oliver O'Halloran
• [Skiboot] [PATCH] hw/slw: Don't assert on a unknown chip   Oliver O'Halloran
• [Skiboot] [PATCH v2] hw/slw: Don't assert on a unknown chip   Oliver O'Halloran
• [Skiboot] [PATCH] doc: Document ibm,heartbeat-ms   Oliver
• [Skiboot] [PATCH] npu2: Fix NPU<->GPU binding error message   Oliver
• [Skiboot] [PATCH] libflash/blocklevel: Add missing newline to debug messages   Pridhiviraj Paidipeddi
• [Skiboot] [PATCH] opal/init: Fix VERSION hash calculation by Re-ordering inits   Pridhiviraj Paidipeddi
• [Skiboot] [PATCH] core/cpu: Prevent clobbering of stack guard for boot-cpu   Nicholas Piggin
• [Skiboot] [PATCH] core/cpufeatures: Fix setting DARN and SCV HWCAP feature bits   Nicholas Piggin
• [Skiboot] [PATCH 0/4] next round of OPAL debugging improvements   Nicholas Piggin
• [Skiboot] [PATCH 1/4] core/stack: backtrace unwind basic OPAL call details   Nicholas Piggin
• [Skiboot] [PATCH 2/4] asm/head: implement quiescing without stack or clobbering regs   Nicholas Piggin
• [Skiboot] [PATCH 3/4] core/opal: Emergency stack for re-entry   Nicholas Piggin
• [Skiboot] [PATCH 4/4] core/opal: Allow poller re-entry if OPAL was re-entered   Nicholas Piggin
• [Skiboot] [PATCH] uart: fix uart_opal_flush to take console lock over uart_con_flush   Nicholas Piggin
• [Skiboot] [PATCH v2 4/9] powerpc/powernv: OPAL console standardise OPAL_BUSY loops   Nicholas Piggin
• [Skiboot] [PATCH] mambo/mambo_utils.tcl: Inject an MCE at a specified address   Nicholas Piggin
• [Skiboot] [PATCH] mambo/mambo_utils.tcl: Inject an MCE at a specified address   Nicholas Piggin
• [Skiboot] [PATCH v2] mambo/mambo_utils.tcl: Inject an MCE at a specified address   Nicholas Piggin
• [Skiboot] [PATCH] external/mambo: improve helper for machine checks   Nicholas Piggin
• [Skiboot] [PATCH] fast-reboot: parallel memory clearing   Nicholas Piggin
• [Skiboot] [PATCH] fast-reboot: parallel memory clearing   Nicholas Piggin
• [Skiboot] [PATCH 1/2] core: Fix iteration condition to skip garded cpu   Nicholas Piggin
• [Skiboot] [PATCH 2/2] core/fast-reboot: Increase timeout for dctl sreset to 1sec   Nicholas Piggin
• [Skiboot] [PATCH 0/4] next round of OPAL debugging improvements   Nicholas Piggin
• [Skiboot] [PATCH] asm/head: Fix comparison in opal_entry for switching to emergency   Nicholas Piggin
• [Skiboot] [PATCH] uart: fix uart_opal_flush to take console lock over uart_con_flush   Nicholas Piggin
• [Skiboot] [PATCH] hw/npu2.c: Remove static configuration of NPU2 register   Alistair Popple
• [Skiboot] [PATCH] npu2: Improve log output of GPU-to-link mapping   Alistair Popple
• [Skiboot] [PATCH] npu2/hw-procedures: fence bricks on GPU reset   Alistair Popple
• [Skiboot] [PATCH v2 00/15] opal/hmi: Rework HMI handling.   Mahesh J Salgaonkar
• [Skiboot] [PATCH v2 01/15] opal/hmi: Don't re-read HMER multiple times   Mahesh J Salgaonkar
• [Skiboot] [PATCH v2 02/15] opal/hmi: Remove races in clearing HMER   Mahesh J Salgaonkar
• [Skiboot] [PATCH v2 03/15] opal/hmi: Add a new opal_handle_hmi2 that returns direct info to Linux   Mahesh J Salgaonkar
• [Skiboot] [PATCH v2 04/15] opal/hmi: Move timer related error handling to a separate function   Mahesh J Salgaonkar
• [Skiboot] [PATCH v2 05/15] opal/hmi: Don't bother passing HMER to pre-recovery cleanup   Mahesh J Salgaonkar
• [Skiboot] [PATCH v2 06/15] opal/hmi: Rework HMI handling of TFAC errors   Mahesh J Salgaonkar
• [Skiboot] [PATCH v2 07/15] opal/hmi: Initialize the hmi event with old value of HMER.   Mahesh J Salgaonkar
• [Skiboot] [PATCH v2 08/15] opal/hmi: Do not send HMI event if no errors are found.   Mahesh J Salgaonkar
• [Skiboot] [PATCH v2 09/15] opal/hmi: Fix soft lockups during TOD errors   Mahesh J Salgaonkar
• [Skiboot] [PATCH v2 10/15] opal/hmi: Stop flooding HMI event for TOD errors.   Mahesh J Salgaonkar
• [Skiboot] [PATCH v2 11/15] opal/hmi: Fix handling of TFMR parity/corrupt error.   Mahesh J Salgaonkar
• [Skiboot] [PATCH v2 12/15] opal/hmi: Print additional debug information in rendezvous.   Mahesh J Salgaonkar
• [Skiboot] [PATCH v2 13/15] opal/hmi: check thread 0 tfmr to validate latched tfmr errors.   Mahesh J Salgaonkar
• [Skiboot] [PATCH v2 14/15] opal/hmi: Generate hmi event for recovered HDEC parity error.   Mahesh J Salgaonkar
• [Skiboot] [PATCH v2 15/15] opal/hmi: Add documentation for opal_handle_hmi2 call   Mahesh J Salgaonkar
• [Skiboot] [PATCH 1/2] opal:hmi: Add missing processor recovery reason string.   Mahesh J Salgaonkar
• [Skiboot] [PATCH 2/2] opal/hmi: Generate one event per core for processor recovery.   Mahesh J Salgaonkar
• [Skiboot] [PATCH] ipmi: Sending a list of PCI devices via IPMI OEM messages   Artem Senichev
• [Skiboot] [PATCH] mambo/mambo_utils.tcl: Inject an MCE at a specified address   Balbir Singh
• [Skiboot] [PATCH] mambo/mambo_utils.tcl: Inject an MCE at a specified address   Balbir Singh
• [Skiboot] [PATCH v2] mambo/mambo_utils.tcl: Inject an MCE at a specified address   Balbir Singh
• [Skiboot] [PATCH] external/mambo: improve helper for machine checks   Balbir Singh
• [Skiboot] [PATCH v3] mambo/mambo_utils.tcl: Inject an MCE at a specified address   Balbir Singh
• [Skiboot] [PATCH] npu2/hw-procedures: fence bricks on GPU reset   Balbir Singh
• [Skiboot] [PATCH] external/mambo: Add di command to decode instructions   Balbir Singh
• [Skiboot] [PATCH] doc: Document ibm,heartbeat-ms   Stewart Smith
• [Skiboot] [PATCH] doc: Document ibm,heartbeat-ms   Stewart Smith
• [Skiboot] [PATCH] core/lock.c: ensure valid start value for lock spin duration warning   Stewart Smith
• [Skiboot] [PATCH v4] capi: Poll Err/Status register during CAPP recovery   Stewart Smith
• [Skiboot] [PATCH v2] phb4: Reset FIR/NFIR registers before PHB4 probe   Stewart Smith
• [Skiboot] [PATCH] doc: Document ibm,heartbeat-ms   Stewart Smith
• [Skiboot] [PATCH v3] xive: disable store EOI support   Stewart Smith
• [Skiboot] skiboot 5.10.4   Stewart Smith
• [Skiboot] [PATCH] core/cpu: Prevent clobbering of stack guard for boot-cpu   Stewart Smith
• [Skiboot] [PATCH] core/cpu: Prevent clobbering of stack guard for boot-cpu   Stewart Smith
• [Skiboot] [PATCH] core/cpufeatures: Fix setting DARN and SCV HWCAP feature bits   Stewart Smith
• [Skiboot] skiboot v5.11   Stewart Smith
• [Skiboot] [PATCH 0/3] Fix various FWTS device tree warnings   Stewart Smith
• [Skiboot] [PATCH 1/3] ibm, firmware-versions: add 'open-power' for backwards compat   Stewart Smith
• [Skiboot] [PATCH 2/3] hdata/spira: parse vpd to add part-number and serial-number to xscom@ node   Stewart Smith
• [Skiboot] [PATCH 3/3] device-tree vpd/xscom@: add more VPD to xscom@ nodes   Stewart Smith
• [Skiboot] [PATCH] hdat/i2c.c: quieten "v2 found, parsing as v1"   Stewart Smith
• [Skiboot] [PATCH 3/3] device-tree vpd/xscom@: add more VPD to xscom@ nodes   Stewart Smith
• [Skiboot] [PATCH 1/3] ibm, firmware-versions: add 'open-power' for backwards compat   Stewart Smith
• [Skiboot] [PATCH] opal-prd: Insert powernv_flash module   Stewart Smith
• [Skiboot] [PATCH] npu2: Move NPU2_XTS_BDF_MAP_VALID assignment to context init   Stewart Smith
• [Skiboot] [PATCH] phb4: Do not set the PBCQ Tunnel BAR register when enabling capi mode.   Stewart Smith
• [Skiboot] [PATCH] hw/imc: Add support to load imc catalog lid file   Stewart Smith
• [Skiboot] [PATCH 1/2] pcie-slot: Don't fail powering on an already on switch   Stewart Smith
• [Skiboot] [PATCH 2/2] phb4: Quieten and improve "Timeout waiting for electrical link"   Stewart Smith
• [Skiboot] [PATCH] core/pci: Document some stuff   Stewart Smith
• [Skiboot] [PATCH] hw/imc: Check for pause_microcode_at_boot() return status   Stewart Smith
• [Skiboot] [PATCH v2] phb4: set TVT1 for tunneled operations in capi mode   Stewart Smith
• [Skiboot] [PATCH v2 0/5] libflash blocklevel ECC corrections   Stewart Smith
• [Skiboot] [PATCH 00/15] libffs and ffspart rework   Stewart Smith
• [Skiboot] [PATCH] hdat/i2c.c: quieten "v2 found, parsing as v1"   Stewart Smith
• [Skiboot] [PATCH] Disable stop states from OPAL   Stewart Smith
• [Skiboot] [PATCH] hw/imc: Check for pause_microcode_at_boot() return status   Stewart Smith
• [Skiboot] [PATCH] core: Correctly load initramfs in stb container   Stewart Smith
• [Skiboot] [PATCH v2] hdata: Move 'HRMOR_BIT' macro to header file   Stewart Smith
• [Skiboot] [PATCH] occ: sensors-groups: Add DT properties to mark HWMON sensor groups   Stewart Smith
• [Skiboot] [PATCH 1/2] npu2-opencapi: Fix 'link internal error' FIR, take 1   Stewart Smith
• [Skiboot] [PATCH V2] capi: Keep the current mmio windows in the mbt cache table.   Stewart Smith
• [Skiboot] [PATCH 2/3] hdata/spira: parse vpd to add part-number and serial-number to xscom@ node   Stewart Smith
• [Skiboot] [PATCH v2] Makefile: Make it easier to find the docs   Stewart Smith
• [Skiboot] [PATCH] interrupts: Create an "interrupts" property in the OPAL node   Stewart Smith
• [Skiboot] [PATCH 2/2] romulus: Add a barebones slot table   Stewart Smith
• [Skiboot] [PATCH v2 1/3] core/pci: Set slot power limit when supported   Stewart Smith
• [Skiboot] [PATCH] phb4: Restore bus numbers after CRS   Stewart Smith
• [Skiboot] [PATCH] Disable stop states from OPAL   Stewart Smith
• [Skiboot] [PATCH 00/14] opal/hmi: Rework HMI handling.   Stewart Smith
• [Skiboot] [PATCH 06/14] opal/hmi: Rework HMI handling of TFAC errors   Stewart Smith
• [Skiboot] [PATCH] libflash/blocklevel: Add missing newline to debug messages   Stewart Smith
• [Skiboot] skiboot v5.11   Stewart Smith
• [Skiboot] [PATCH] fast-reboot: parallel memory clearing   Stewart Smith
• [Skiboot] [PATCH] fast-reboot: parallel memory clearing   Stewart Smith
• [Skiboot] [PATCH 1/2] core/test/run-trace: fix on ppc64el   Stewart Smith
• [Skiboot] [PATCH 2/2] external/trace: fix makefile   Stewart Smith
• [Skiboot] [PATCH v2 00/15] opal/hmi: Rework HMI handling.   Stewart Smith
• [Skiboot] [PATCH 1/2] core: Fix iteration condition to skip garded cpu   Stewart Smith
• [Skiboot] [PATCH 0/4] next round of OPAL debugging improvements   Stewart Smith
• [Skiboot] [PATCH 1/2] core/test/run-trace: fix on ppc64el   Stewart Smith
• [Skiboot] [PATCH] travis: Enable ppc64le builds   Stewart Smith
• [Skiboot] [PATCH 0/4] next round of OPAL debugging improvements   Stewart Smith
• [Skiboot] [PATCH] external: Add "lpc" tool   Stewart Smith
• [Skiboot] [PATCH] travis: Enable ppc64le builds   Stewart Smith
• [Skiboot] [PATCH] npu2: Improve log output of GPU-to-link mapping   Stewart Smith
• [Skiboot] [PATCH] external/mambo: improve helper for machine checks   Stewart Smith
• [Skiboot] [PATCH] hw/npu2.c: Remove static configuration of NPU2 register   Stewart Smith
• [Skiboot] [PATCH v3] mambo/mambo_utils.tcl: Inject an MCE at a specified address   Stewart Smith
• [Skiboot] [PATCH] sensors: Dont add DTS sensors when OCC inband sensors are available   Stewart Smith
• [Skiboot] [PATCH 1/5] npu2-opencapi: Use presence detection   Stewart Smith
• [Skiboot] [PATCH 0/4] p9dsu platform updates   Stewart Smith
• [Skiboot] [PATCH 1/4] p9dsu: change esel command from AMI to IBM 0x3a.   Stewart Smith
• [Skiboot] [PATCH 2/4] p9dsu HACK: fix system-vpd eeprom   Stewart Smith
• [Skiboot] [PATCH 3/4] p9dsu: add pci slot table for Boston LC 1U/2U and Boston LA/ESS.   Stewart Smith
• [Skiboot] [PATCH 4/4] p9dsu: add slot power limit.   Stewart Smith
• [Skiboot] [PATCH] hdata: Fix DIMM size property   Stewart Smith
• [Skiboot] [PATCH] hdata: Add DIMM actual speed to device tree   Stewart Smith
• [Skiboot] [PATCH] hdata/tpmrel: detect tpm not present by looking up the stinfo->status   Stewart Smith
• [Skiboot] [PATCH] npu2/hw-procedures: fence bricks on GPU reset   Stewart Smith
• [Skiboot] [PATCH 1/3] pci-dt-slot: Big ol' cleanup   Stewart Smith
• [Skiboot] skiboot 5.10.5   Stewart Smith
• [Skiboot] [PATCH] p9dsu: detect p9dsu variant even when hostboot doesn't tell us   Stewart Smith
• [Skiboot] [PATCH] xive: fix missing unlock in error path   Stewart Smith
• [Skiboot] [PATCH] OPAL_PCI_SET_POWER_STATE: fix locking in error paths   Stewart Smith
• [Skiboot] [PATCH] hdat_to_dt: hash_prop the same on all platforms   Stewart Smith
• [Skiboot] [PATCH 1/4] hdata/i2c: Ignore CFAM I2C master   Stewart Smith
• [Skiboot] [PATCH 0/4] p9dsu platform updates   Stewart Smith
• [Skiboot] [PATCH] external/mambo: Add di command to decode instructions   Stewart Smith
• [Skiboot] [PATCH 1/2] opal:hmi: Add missing processor recovery reason string.   Stewart Smith
• [Skiboot] [PATCH] asm/head: Fix comparison in opal_entry for switching to emergency   Stewart Smith
• [Skiboot] [PATCH] p9dsu: detect p9dsu variant even when hostboot doesn't tell us   Stewart Smith
• [Skiboot] [PATCH] mambo: Add persistent memory disk support   Stewart Smith
• [Skiboot] [PATCH] core/pci-dt-slots: Fix devfn lookup   Stewart Smith
• [Skiboot] [PATCH v2] hw/slw: Don't assert on a unknown chip   Stewart Smith
• [Skiboot] [PATCH] OPAL_PCI_SET_POWER_STATE: fix locking in error paths   Stewart Smith
• [Skiboot] [PATCH] xive: fix missing unlock in error path   Stewart Smith
• [Skiboot] [PATCH] uart: fix uart_opal_flush to take console lock over uart_con_flush   Stewart Smith
• [Skiboot] [PATCH] hdat_to_dt: hash_prop the same on all platforms   Stewart Smith
• [Skiboot] [PATCH] hw/imc: Add support to load imc catalog lid file   Madhavan Srinivasan
• [Skiboot] [PATCH] hw/imc: Check for pause_microcode_at_boot() return status   Madhavan Srinivasan
• [Skiboot] [PATCH] hw/imc: Check for pause_microcode_at_boot() return status   Madhavan Srinivasan
• [Skiboot] [PATCH] Update default stop-state-disable mask to cut only stop11   Vaidyanathan Srinivasan
• [Skiboot] [PATCH 1/2] core: Fix iteration condition to skip garded cpu   Vaidyanathan Srinivasan
• [Skiboot] [PATCH 2/2] core/fast-reboot: Increase timeout for dctl sreset to 1sec   Vaidyanathan Srinivasan
• [Skiboot] [PATCH v2] Makefile: Make it easier to find the docs   Joel Stanley
• [Skiboot] [PATCH] hw/imc: Check for pause_microcode_at_boot() return status   Anju T Sudhakar
• [Skiboot] [PATCH] phb4: Do not set the PBCQ Tunnel BAR register when enabling capi mode.   christophe lombard
• [Skiboot] [PATCH V2] capi: Keep the current mmio windows in the mbt cache table.   christophe lombard
• [Skiboot] [PATCH v2] phb4: set TVT1 for tunneled operations in capi mode   christophe lombard
• [Skiboot] [PATCH] phb4: Minor CAPP init cleanup   christophe lombard
• [Skiboot] [PATCH] phb4: Minor CAPP init cleanup   christophe lombard

Last message date: Mon Apr 30 19:12:09 AEST 2018
Archived on: Mon Apr 30 19:12:31 AEST 2018

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...