August 2017 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Tue Aug 1 10:14:58 AEST 2017
Ending: Thu Aug 31 18:26:58 AEST 2017
Messages: 363

• [Skiboot] [PATCH v2 05/10] npu2: Use read-modify-write in npu2_assign_gmb()   Reza Arbab
• [Skiboot] [PATCH v3 00/10] npu2: Updates for POWER9 DD2   Reza Arbab
• [Skiboot] [PATCH v3 01/10] npu2: Add a function to detect POWER9 DD1   Reza Arbab
• [Skiboot] [PATCH v3 02/10] npu2: Fix indirect SCOM addresses   Reza Arbab
• [Skiboot] [PATCH v3 03/10] npu2: Fix NPU/PHY0/PHY1 stack order   Reza Arbab
• [Skiboot] [PATCH v3 04/10] npu2: Rename variable in npu2_assign_gmb()   Reza Arbab
• [Skiboot] [PATCH v3 05/10] npu2: Use read-modify-write in npu2_assign_gmb()   Reza Arbab
• [Skiboot] [PATCH v3 06/10] npu2: Add NPU2_GPU1_MEM_BAR   Reza Arbab
• [Skiboot] [PATCH v3 07/10] npu2: Adjust content of the GENID BAR   Reza Arbab
• [Skiboot] [PATCH v3 08/10] npu2: Adjust content of the NTL BAR   Reza Arbab
• [Skiboot] [PATCH v3 09/10] npu2: Set the XTS config2 register   Reza Arbab
• [Skiboot] [PATCH v3 10/10] npu2: Allow POWER9 DD2 in ec level check   Reza Arbab
• [Skiboot] [Reposting PATCHv2 1/6] SLW: Add support for p9_stop_api   Akshay Adiga
• [Skiboot] [PATCH v2 00/19] libflash/libffs/pflash improvements   Stewart Smith
• [Skiboot] [PATCH v6 0/7] Enable VAS   Stewart Smith
• [Skiboot] [PATCH V4 0/5] Enable NX 842 and gzip compression engines on Power9   Stewart Smith
• [Skiboot] [PATCH 1/3] doc: update copyright notices   Stewart Smith
• [Skiboot] [PATCH 2/3] doc: RST syntax fixes   Stewart Smith
• [Skiboot] [PATCH 3/3] doc/console-log: minor updates   Stewart Smith
• [Skiboot] [PATCH v4] phb4: Enable PCI peer-to-peer   Frederic Barrat
• [Skiboot] PCI slot table rework   Oliver O'Halloran
• [Skiboot] [RFC 01/12] witherspoon: Check for existing npu node   Oliver O'Halloran
• [Skiboot] [RFC 02/12] witherspoon: Fix up slot map   Oliver O'Halloran
• [Skiboot] [RFC 03/12] astbmc/slots: Add NVLink targeting information   Oliver O'Halloran
• [Skiboot] [RFC 04/12] astbmc/slots: Add an upstream port slot type   Oliver O'Halloran
• [Skiboot] [RFC 05/12] core/pci-dt-slot: Represent PCIe slots in the devicetree   Oliver O'Halloran
• [Skiboot] [RFC 06/12] astbmc/slots: Parse slot stables into device-tree   Oliver O'Halloran
• [Skiboot] [RFC 07/12] core/pci: Add for_each_pci_dev()   Oliver O'Halloran
• [Skiboot] [RFC 08/12] npu: Rework finding the paired PCI devices   Oliver O'Halloran
• [Skiboot] [RFC 09/12] astbmc/slots: Remove NPU PHB slots   Oliver O'Halloran
• [Skiboot] [RFC 10/12] witherspoon: Add missing slot information   Oliver O'Halloran
• [Skiboot] [RFC 11/12] astbmc/slots: Add ST_PHB_ENTRY helper   Oliver O'Halloran
• [Skiboot] [RFC 12/12] pci-virt: Add generic slot and cfg functions   Oliver O'Halloran
• [Skiboot] [PATCH v4] phb4: Enable PCI peer-to-peer   Russell Currey
• [Skiboot] [PATCH] hdata/i2c: Work around broken I2C array version   Oliver O'Halloran
• [Skiboot] [PATCH 01/12] Update .gitignore   Cyril Bur
• [Skiboot] [PATCH 02/12] libflash/mbox-flash: Fix unintentional integer overflow (CID 142226)   Cyril Bur
• [Skiboot] [PATCH 03/12] libflash/libflash: Remove logicially dead code (CID 97821)   Cyril Bur
• [Skiboot] [PATCH 04/12] libflash/blocklevel: Fix theoretical use after free (CID 145924)   Cyril Bur
• [Skiboot] [PATCH 05/12] core/flash core/init: Fix unintended sign extension   Cyril Bur
• [Skiboot] [PATCH 06/12] core/hmi: Fix use of uninitialised value (CID 147808)   Cyril Bur
• [Skiboot] [PATCH 07/12] core/mem_region: Check return value of add_region() (CID 147251)   Cyril Bur
• [Skiboot] [PATCH 08/12] hdata/paca: Fix possible dereference of NULL (CID 141080)   Cyril Bur
• [Skiboot] [PATCH 09/12] hdata/vpd: Fix possible NULL dereference (CID 144258)   Cyril Bur
• [Skiboot] [PATCH 10/12] hw/xive: Fix NULL return value dereferences (CID 141079 & 141081)   Cyril Bur
• [Skiboot] [PATCH 11/12] hw/xive: Check return value from xive_decode_vp() (CID 142343 142344)   Cyril Bur
• [Skiboot] [PATCH 12/12] hw/xive: Fix unchecked return value in opal_xive_dump_emu() (CID 144257)   Cyril Bur
• [Skiboot] [PATCH v2] external/gard: Print an error if run on an FSP system   Cyril Bur
• [Skiboot] [PATCH v2 00/11] MBOX Protocol: Onwards to V3   Cyril Bur
• [Skiboot] [PATCH v2 01/11] libflash/mbox-flash: Add v2 error codes   Cyril Bur
• [Skiboot] [PATCH v2 02/11] libflash/mbox-flash: Always close windows before opening a new window   Cyril Bur
• [Skiboot] [PATCH v2 03/11] libflash/mbox-flash: Move sequence handling to driver level   Cyril Bur
• [Skiboot] [PATCH v2 04/11] libflash/mbox-flash: Allow mbox-flash to tell the driver msg timeouts   Cyril Bur
• [Skiboot] [PATCH v2 05/11] hw/lpc-mbox: Simplify message bookkeeping and timeouts   Cyril Bur
• [Skiboot] [PATCH v2 06/11] libflash/mbox-flash: Simplify message sending   Cyril Bur
• [Skiboot] [PATCH v2 07/11] libflash/mbox-flash: Use BMC suggested timeout value   Cyril Bur
• [Skiboot] [PATCH v2 08/11] libflash/mbox-flash: Use static arrays of function pointers   Cyril Bur
• [Skiboot] [PATCH v2 09/11] libflash/mbox-flash: Understand v3   Cyril Bur
• [Skiboot] [PATCH v2 10/11] libflash/mbox-flash: Add the ability to lock flash   Cyril Bur
• [Skiboot] [PATCH v2 11/11] libflash/test: Add tests for mbox-flash   Cyril Bur
• [Skiboot] [PATCH 1/2] xscom: Add xscom_write_mask() function   Alistair Popple
• [Skiboot] [PATCH 2/2] hw/npu2.c: Add temporary scominits to enable NVLink mode on DD2   Alistair Popple
• [Skiboot] [PATCH v3 05/10] npu2: Use read-modify-write in npu2_assign_gmb()   Alistair Popple
• [Skiboot] [PATCH v3 06/10] npu2: Add NPU2_GPU1_MEM_BAR   Alistair Popple
• [Skiboot] [PATCH v4] phb4: Enable PCI peer-to-peer   Stewart Smith
• [Skiboot] [PATCH v3 00/10] npu2: Updates for POWER9 DD2   Stewart Smith
• [Skiboot] [PATCH 1/2] xscom: Add xscom_write_mask() function   Stewart Smith
• [Skiboot] [PATCH v2] external/gard: Print an error if run on an FSP system   Vasant Hegde
• [Skiboot] [PATCH 09/12] hdata/vpd: Fix possible NULL dereference (CID 144258)   Vasant Hegde
• [Skiboot] [PATCH 08/12] hdata/paca: Fix possible dereference of NULL (CID 141080)   Vasant Hegde
• [Skiboot] [PATCH v2] external/gard: Print an error if run on an FSP system   Cyril Bur
• [Skiboot] [PATCH v2] external/gard: Print an error if run on an FSP system   Vasant Hegde
• [Skiboot] [PATCH] sensors: dts: Assert special wakeup on idle cores while reading temperature   Shilpasri G Bhat
• [Skiboot] [PATCH] HDAT/device-tree: only add lid-type on pre-POWER9 systems   Stewart Smith
• [Skiboot] [PATCH 1/2] opal-prd: Disable pnor access interface on FSP system   Vasant Hegde
• [Skiboot] [PATCH 2/2] opal-prd: Do not pass pnor file while starting daemon   Vasant Hegde
• [Skiboot] [PATCH] HDAT/device-tree: only add lid-type on pre-POWER9 systems   Vasant Hegde
• [Skiboot] [PATCH 1/2] opal-prd: Disable pnor access interface on FSP system   Vasant Hegde
• [Skiboot] [PATCH 1/2] npu2: Add npu2_clear_link_flag()   Reza Arbab
• [Skiboot] [PATCH 2/2] npu2: Implement FLR   Reza Arbab
• [Skiboot] [PATCH] hdata/spira: POWER9 NX isn't software compatible with P7/P8 NX, don't claim so   Stewart Smith
• [Skiboot] [PATCH] sensor-groups : occ: Add 'ops' DT property   Shilpasri G Bhat
• [Skiboot] [PATCH] hdata/spira: POWER9 NX isn't software compatible with P7/P8 NX, don't claim so   Stewart Smith
• [Skiboot] [PATCH 1/4] hdat: Make is_power9n() global   Michael Neuling
• [Skiboot] [PATCH 2/4] hdat: Add POWER9 DD2.0 specific pa_features   Michael Neuling
• [Skiboot] [PATCH 3/4] hdat: Fix PCIe GEN4 lane-eq setting for DD2   Michael Neuling
• [Skiboot] [PATCH 4/4] phb4: Enhanced PCIe training tracing   Michael Neuling
• [Skiboot] [PATCH 1/2] opal-prd: Disable pnor access interface on FSP system   Jeremy Kerr
• [Skiboot] [PATCH 1/6] xive: Check for valid PIR index when decoding   Russell Currey
• [Skiboot] [PATCH 2/6] phb4: Fix duplicate in EEH register dump   Russell Currey
• [Skiboot] [PATCH 3/6] phb4: Skip attempting to fix PHBs broken on boot   Russell Currey
• [Skiboot] [PATCH 4/6] phb4: Prepare for link down when creset called from kernel   Russell Currey
• [Skiboot] [PATCH 5/6] phb4: Ignore slot state if performing complete reset   Russell Currey
• [Skiboot] [PATCH 6/6] phb4: Fix reading wrong size registers in EEH dump   Russell Currey
• [Skiboot] [PATCH v3, 2/2] core/lock: Add lock timeout warnings   Cyril Bur
• [Skiboot] [PATCH 2/6] phb4: Fix duplicate in EEH register dump   Andrew Donnellan
• [Skiboot] [PATCH 1/6] xive: Check for valid PIR index when decoding   Andrew Donnellan
• [Skiboot] [PATCH 3/6] phb4: Skip attempting to fix PHBs broken on boot   Andrew Donnellan
• [Skiboot] [PATCH 4/6] phb4: Prepare for link down when creset called from kernel   Andrew Donnellan
• [Skiboot] [PATCH 5/6] phb4: Ignore slot state if performing complete reset   Andrew Donnellan
• [Skiboot] [PATCH 6/6] phb4: Fix reading wrong size registers in EEH dump   Andrew Donnellan
• [Skiboot] [PATCH 1/2] opal-prd: Disable pnor access interface on FSP system   Vasant Hegde
• [Skiboot] [PATCH] [platforms/zz] Recognize the 2s2u zz platform   Ananth N Mavinakayanahalli
• [Skiboot] [PATCH 1/2] opal-prd: Disable pnor access interface on FSP system   Jeremy Kerr
• [Skiboot] [PATCH] DT: Add ibm,firmware-versions node   Samuel Mendoza-Jonas
• [Skiboot] [RFC PATCH 0/3] fixes for building BE target with LE toolchain   Nicholas Piggin
• [Skiboot] [RFC PATCH 0/4] use stop states in idle for POWER9   Nicholas Piggin
• [Skiboot] [RFC PATCH 1/4] cpu: avoid decrementer wakeups in case of cpu_wake_on_job idle   Nicholas Piggin
• [Skiboot] [RFC PATCH 2/4] init: add missing sync_icache after exception vector patching   Nicholas Piggin
• [Skiboot] [RFC PATCH 3/4] cpu: idle move the minimum PM latency into the idle code   Nicholas Piggin
• [Skiboot] [RFC PATCH 4/4] cpu: initial power management implementation for POWER9   Nicholas Piggin
• [Skiboot] [RFC PATCH] i2c: Move tpm i2c wrapper code into core   Andrew Donnellan
• [Skiboot] [PATCH 2/2] npu2: Implement FLR   Alexey Kardashevskiy
• [Skiboot] [RFC V2] sensors: dts: Assert special wakeup on idle cores while reading temperature   Shilpasri G Bhat
• [Skiboot] [PATCH] npu2: Fix typo in message   Andrew Donnellan
• [Skiboot] [PATCH] [platforms/zz] Recognize the 2s2u zz platform   Stewart Smith
• [Skiboot] [PATCH 1/6] xive: Check for valid PIR index when decoding   Stewart Smith
• [Skiboot] [PATCH 1/4] hdat: Make is_power9n() global   Stewart Smith
• [Skiboot] [PATCH 1/2] HDAT: Add chip-id property to ipmi sensors   Stewart Smith
• [Skiboot] [PATCH] sensor-groups : occ: Add 'ops' DT property   Stewart Smith
• [Skiboot] [PATCH] hdata/i2c: Work around broken I2C array version   Stewart Smith
• [Skiboot] [PATCH] NPU2: fix missing unlock   Stewart Smith
• [Skiboot] [PATCH] NPU2: fix missing unlock   Andrew Donnellan
• [Skiboot] [PATCH 1/2] opal-prd: Disable pnor access interface on FSP system   Stewart Smith
• [Skiboot] [PATCH] npu2: Fix typo in message   Stewart Smith
• [Skiboot] [PATCH 01/12] Update .gitignore   Stewart Smith
• [Skiboot] [PATCH] README: Fix Ubuntu build instructions   Andrew Donnellan
• [Skiboot] [PATCH RFC 0/1] npu2: Hook up data link interrupts   Sam Bobroff
• [Skiboot] [PATCH RFC 1/1] npu2: Enable recoverable data link (no-stall) interrupts   Sam Bobroff
• [Skiboot] [PATCH] README: Fix Ubuntu build instructions   Jeremy Kerr
• [Skiboot] [PATCH] README: Fix Ubuntu build instructions   Andrew Donnellan
• [Skiboot] [PATCH v3] platform/astbmc: Do not delete compatible property   Vasant Hegde
• [Skiboot] [PATCH v2] README: Fix/improve Ubuntu/Fedora build instructions   Andrew Donnellan
• [Skiboot] [PATCH 1/4] external/pflash: Silence false positive Coverity CID 163739   Cyril Bur
• [Skiboot] [PATCH 2/4] external/pflash: Fix resource leak CID 163742   Cyril Bur
• [Skiboot] [PATCH 3/4] external/pflash: Fix resource leak CID 163745   Cyril Bur
• [Skiboot] [PATCH 4/4] external/pflash: Fix not checking return values in set_ecc().   Cyril Bur
• [Skiboot] [RFC PATCH] opal: Extract sw checkstop fir address from HDAT.   Mahesh J Salgaonkar
• [Skiboot] [PATCH] core/init: Add ibm, processor-storage-keys property to CPU DT node.   Thiago Jung Bauermann
• [Skiboot] [PATCH] xscom: Grab P9 DD2 revision level   Michael Neuling
• [Skiboot] [PATCH] VAS: Remove misleading print   Michael Neuling
• [Skiboot] [PATCH] core/init: Add ibm, processor-storage-keys property to CPU DT node.   Vasant Hegde
• [Skiboot] [PATCH 1/3] pci: Track whether a PCI device is a virtual function   Russell Currey
• [Skiboot] [PATCH 2/3] pci: Trivial typo fixes   Russell Currey
• [Skiboot] [PATCH 3/3] pci: Wait for CRS and switch link when restoring bus numbers   Russell Currey
• [Skiboot] [PATCH 1/3] pci: Track whether a PCI device is a virtual function   Andrew Donnellan
• [Skiboot] [PATCH 2/3] pci: Trivial typo fixes   Andrew Donnellan
• [Skiboot] [PATCH] external/xscom-utils: Add --list-bits   Oliver O'Halloran
• [Skiboot] [PATCH RFC 1/1] npu2: Enable recoverable data link (no-stall) interrupts   Alistair Popple
• [Skiboot] [PATCH] hw/nx*: Remove extraneous space character   Oliver O'Halloran
• [Skiboot] [PATCH] hw/npu2.c: Add ibm, nvlink-speed device-tree property   Alistair Popple
• [Skiboot] [PATCH 3/3] pci: Wait for CRS and switch link when restoring bus numbers   Andrew Donnellan
• [Skiboot] [PATCH 3/3] pci: Wait for CRS and switch link when restoring bus numbers   Hari Bathini
• [Skiboot] [PATCH] core/init: Add ibm, processor-storage-keys property to CPU DT node.   Michael Ellerman
• [Skiboot] [PATCH] core/init: Add ibm, processor-storage-keys property to CPU DT node.   Thiago Jung Bauermann
• [Skiboot] [RFC PATCH] pflash: support exporting layout as CSV for ffspart   Stewart Smith
• [Skiboot] [PATCH RFC 1/1] npu2: Enable recoverable data link (no-stall) interrupts   Sam Bobroff
• [Skiboot] [PATCH 3/3] pci: Wait for CRS and switch link when restoring bus numbers   Russell Currey
• [Skiboot] [PATCH v2 0/3] npu2: Hook up data link interrupts   Sam Bobroff
• [Skiboot] [PATCH v2 1/3] npu2: Update NPU to NPU2 in comments and messages   Sam Bobroff
• [Skiboot] [PATCH v2 2/3] npu2: Enable recoverable data link (no-stall) interrupts   Sam Bobroff
• [Skiboot] [PATCH v2 3/3] npu2: Add vendor cap for IRQ testing   Sam Bobroff
• [Skiboot] [PATCH] hw/npu2-hw-procedures.c: Update PHY_RESET procedure   Alistair Popple
• [Skiboot] [PATCH v2 1/3] npu2: Update NPU to NPU2 in comments and messages   Andrew Donnellan
• [Skiboot] skiboot-5.1.20   Stewart Smith
• [Skiboot] [PATCH] hw/npu2.c: Add ibm, nvlink-speed device-tree property   Alistair Popple
• [Skiboot] [PATCH] hw/npu2.c: Add ibm, nvlink-speed device-tree property   Alistair Popple
• [Skiboot] [PATCH 1/1] vas: Set mmio enable bits in DD2   Sukadev Bhattiprolu
• [Skiboot] [PATCH] hw/npu2.c: Add ibm, nvlink-speed device-tree property   Stewart Smith
• [Skiboot] [PATCH] hw/npu2.c: Add ibm, nvlink-speed device-tree property   Alistair
• [Skiboot] [RFC] Doc: Add support to build OpenPOWER Foundation style documentation from RST   Jeffrey Scheel
• [Skiboot] [PATCH 1/1] vas: Set mmio enable bits in DD2   Michael Neuling
• [Skiboot] [PATCH v2 1/3] npu2: Update NPU to NPU2 in comments and messages   Sam Bobroff
• [Skiboot] [PATCH v2 2/3] npu2: Enable recoverable data link (no-stall) interrupts   Alistair Popple
• [Skiboot] [PATCH v2 3/3] npu2: Add vendor cap for IRQ testing   Alistair Popple
• [Skiboot] [PATCH] hw/nx*: Remove extraneous space character   Stewart Smith
• [Skiboot] [PATCH 1/1] vas: Set mmio enable bits in DD2   Stewart Smith
• [Skiboot] [PATCH] external/xscom-utils: Add --list-bits   Stewart Smith
• [Skiboot] [PATCH 1/3] pci: Track whether a PCI device is a virtual function   Stewart Smith
• [Skiboot] [PATCH] VAS: Remove misleading print   Stewart Smith
• [Skiboot] [PATCH] xscom: Grab P9 DD2 revision level   Stewart Smith
• [Skiboot] [PATCH 1/2] vas: Set FIRs according to workbook   Michael Neuling
• [Skiboot] [PATCH 2/2] vas: Move core/vas.c -> hw/vas.c   Michael Neuling
• [Skiboot] [RFC PATCH] opal: Extract sw checkstop fir address from HDAT.   Vasant Hegde
• [Skiboot] [PATCH] hw/npu2-hw-procedures.c: Update PHY_RESET procedure   Reza Arbab
• [Skiboot] [PATCH v3 0/3] npu2: Hook up data link interrupts   Sam Bobroff
• [Skiboot] [PATCH v3 1/3] npu2: Update NPU to NPU2 in comments and messages   Sam Bobroff
• [Skiboot] [PATCH v3 2/3] npu2: Enable recoverable data link (no-stall) interrupts   Sam Bobroff
• [Skiboot] [PATCH v3 3/3] npu2: Add vendor cap for IRQ testing   Sam Bobroff
• [Skiboot] [RFC] Doc: Add support to build OpenPOWER Foundation style documentation from RST   Stewart Smith
• [Skiboot] [RFC PATCH] opal: Extract sw checkstop fir address from HDAT.   Stewart Smith
• [Skiboot] [PATCH] opal: Extract sw checkstop fir address from HDAT.   Mahesh J Salgaonkar
• [Skiboot] [RFC PATCH] opal: Extract sw checkstop fir address from HDAT.   Mahesh Jagannath Salgaonkar
• [Skiboot] [PATCH] opal: Extract sw checkstop fir address from HDAT.   Stewart Smith
• [Skiboot] [PATCH 1/2] vas: Set FIRs according to workbook   Stewart Smith
• [Skiboot] [PATCH 1/4] external/pflash: Silence false positive Coverity CID 163739   Stewart Smith
• [Skiboot] [PATCH v2] README: Fix/improve Ubuntu/Fedora build instructions   Stewart Smith
• [Skiboot] [PATCH] NPU2: fix missing unlock   Stewart Smith
• [Skiboot] [PATCH] HDAT/device-tree: only add lid-type on pre-POWER9 systems   Stewart Smith
• [Skiboot] skiboot v5.8-rc1 released!   Stewart Smith
• [Skiboot] [PATCH 1/5] hdata: Fix vpd parse   Vasant Hegde
• [Skiboot] [PATCH 2/5] hdata: Make vpd data parsing function global   Vasant Hegde
• [Skiboot] [PATCH 3/5] hdata: Update RAM area structure   Vasant Hegde
• [Skiboot] [PATCH 4/5] hdata: Add memory hierarchy under xscom node   Vasant Hegde
• [Skiboot] [PATCH 5/5] hdata: Parse SPD data   Vasant Hegde
• [Skiboot] [PATCH] hw/npu2-hw-procedures.c: Update PHY_RESET procedure   Alistair Popple
• [Skiboot] [PATCH 1/3] core/pci: Add for_each_pci_dev()   Oliver O'Halloran
• [Skiboot] [PATCH 2/3] npu: Rework finding the paired PCI devices   Oliver O'Halloran
• [Skiboot] [PATCH 3/3] pci-virt: Add generic slot and cfg functions   Oliver O'Halloran
• [Skiboot] [PATCH 4/5] hdata: Add memory hierarchy under xscom node   Vasant Hegde
• [Skiboot] [PATCH] capi: POWER9 DD2 update   Christophe Lombard
• [Skiboot] [PATCH] hw/npu2-hw-procedures.c: Update PHY_RESET procedure   Reza Arbab
• [Skiboot] [PATCH] hw/npu2.c: Add ibm, nvlink-speed device-tree property   Reza Arbab
• [Skiboot] [PATCH v2] Add documentation for ibm, firmware-versions device tree node   Samuel Mendoza-Jonas
• [Skiboot] [PATCH 00/13] UBSan/LeakSanitizer cleanup   Stewart Smith
• [Skiboot] [PATCH 01/13] Fix mem leak in core/test/run-time-utils   Stewart Smith
• [Skiboot] [PATCH 02/13] test/mem_region: fix incorrect ibm, os-reserve region length   Stewart Smith
• [Skiboot] [PATCH 03/13] core/test/run-device: fix memory leak on exit   Stewart Smith
• [Skiboot] [PATCH 04/13] hdata_to_dt: free device tree on error path   Stewart Smith
• [Skiboot] [PATCH 05/13] hdata/hostservices: fix memory leak parsing mini dt   Stewart Smith
• [Skiboot] [PATCH 06/13] hdata: Reduce 'struct HDIF_array_hdr' alignment to 4 bytes   Stewart Smith
• [Skiboot] [PATCH 07/13] hdata/iohub: fix load of misaligned address for type 'long unsigned int', which requires 8 byte alignment   Stewart Smith
• [Skiboot] [PATCH 08/13] libc/time.c: days_in_month() use char rather than int   Stewart Smith
• [Skiboot] [PATCH 09/13] mktime: fix off-by-one error calling days_in_month   Stewart Smith
• [Skiboot] [PATCH 10/13] libflash/test/test-flash.c: fix memory leak on exit   Stewart Smith
• [Skiboot] [PATCH 11/13] libflash: fix memory leak on flash_exit()   Stewart Smith
• [Skiboot] [PATCH 12/13] libflash/test/test-blocklevel: fix memory leak on exit   Stewart Smith
• [Skiboot] [PATCH 13/13] libc/test/run-snprintf: int -> unsigned int   Stewart Smith
• [Skiboot] [PATCH v3 0/7] Enable stop4 idle state   Akshay Adiga
• [Skiboot] [PATCH v3 1/7] SLW: Add support for p9_stop_api   Akshay Adiga
• [Skiboot] [PATCH v3 2/7] libpore: Build fix for p9_stop_api   Akshay Adiga
• [Skiboot] [PATCH v3 3/7] libpore: Add GLIBC style endianness detection   Akshay Adiga
• [Skiboot] [PATCH v3 4/7] SLW: Add opal_slw_set_reg support for power9   Akshay Adiga
• [Skiboot] [PATCH v3 5/7] SLW: Configure self-restore for HRMOR   Akshay Adiga
• [Skiboot] [PATCH v3 6/7] SLW: Allow deep states if homer address is known   Akshay Adiga
• [Skiboot] [PATCH v3 7/7] SLW: Removing timebase related flags for stop4   Akshay Adiga
• [Skiboot] [PATCH v3 1/3] npu2: Update NPU to NPU2 in comments and messages   Andrew Donnellan
• [Skiboot] [PATCH] hw/p8-i2c: Fix OCC locking   Oliver O'Halloran
• [Skiboot] [PATCH v2] slw: Modify the power9 stop0_lite latency & residency   Vaidyanathan Srinivasan
• [Skiboot] [PATCH] hw/p8-i2c: Fix OCC locking   William Kennington
• [Skiboot] [PATCH v2 03/13] test/mem_region: fix incorrect ibm, os-reserve region length   Stewart Smith
• [Skiboot] [PATCH v3 02/13] test/mem_region: fix incorrect ibm, os-reserve region length   Stewart Smith
• [Skiboot] [RFC PATCH] p9-adu: implement update sequence for PowerBus Hotplug Mode Control   Andrew Donnellan
• [Skiboot] [PATCH 0/6] Debian Stretch and modern GCC/binutils fixes   Stewart Smith
• [Skiboot] [PATCH 1/6] core/test/run-msg: don't depend on unittest mem layout   Stewart Smith
• [Skiboot] [PATCH 2/6] test kernels: link with -N   Stewart Smith
• [Skiboot] [PATCH 3/6] travis: Debian Stretch must pass   Stewart Smith
• [Skiboot] [PATCH 4/6] travis: set -vx on all build scripts   Stewart Smith
• [Skiboot] [PATCH 5/6] gcov: support GCC 7.1+   Stewart Smith
• [Skiboot] [PATCH 6/6] bump skiboot size from 3 to 4MB, reduce heap by 1MB   Stewart Smith
• [Skiboot] [PATCH v2] hw/p8-i2c: Fix OCC locking   Oliver O'Halloran
• [Skiboot] [PATCH v2] hw/p8-i2c: Fix OCC locking   Stewart Smith
• [Skiboot] [PATCH v2] hw/p8-i2c: Fix OCC locking   ppaidipe
• [Skiboot] [PATCH v2] DT: Add ibm,firmware-versions node   Vasant Hegde
• [Skiboot] [PATCH v2 1/5] hdata: Fix vpd parse   Vasant Hegde
• [Skiboot] [PATCH v2 2/5] hdata: Make vpd data parsing function global   Vasant Hegde
• [Skiboot] [PATCH v2 3/5] hdata: Update RAM area structure   Vasant Hegde
• [Skiboot] [PATCH v2 4/5] hdata: Add memory hierarchy under xscom node   Vasant Hegde
• [Skiboot] [PATCH v2 5/5] hdata: Parse SPD data   Vasant Hegde
• [Skiboot] [PATCH v2 1/5] hdata: Fix vpd parse   Ananth N Mavinakayanahalli
• [Skiboot] [PATCH v2 2/5] hdata: Make vpd data parsing function global   Ananth N Mavinakayanahalli
• [Skiboot] [PATCH v3 2/3] npu2: Enable recoverable data link (no-stall) interrupts   Frederic Barrat
• [Skiboot] [PATCH v2] DT: Add ibm,firmware-versions node   Samuel Mendoza-Jonas
• [Skiboot] [PATCH v2] DT: Add ibm,firmware-versions node   Vasant Hegde
• [Skiboot] [PATCH v3] DT: Add ibm,firmware-versions node   Vasant Hegde
• [Skiboot] [PATCH] blocklevel_info: Refactor the passing of output data   William A. Kennington III
• [Skiboot] [PATCH] blocklevel_info: Refactor the passing of output data   Cyril Bur
• [Skiboot] [RFC PATCH 00/13] Rework flash TOC generation   Cyril Bur
• [Skiboot] [RFC PATCH 01/13] external/ffspart: Allow # comments in input file   Cyril Bur
• [Skiboot] [RFC PATCH 02/13] libflash/libffs: Add helpers for the treatment of partition flags   Cyril Bur
• [Skiboot] [RFC PATCH 03/13] external/pflash: Use ffs_entry_user_to_string() to standardise flag strings   Cyril Bur
• [Skiboot] [RFC PATCH 04/13] libflash/libffs: Add setter for a partitions actual size   Cyril Bur
• [Skiboot] [RFC PATCH 05/13] libflash/libffs: ffs_close() should use ffs_hdr_free()   Cyril Bur
• [Skiboot] [RFC PATCH 06/13] external/ffspart: Remove side, order and backup options   Cyril Bur
• [Skiboot] [RFC PATCH 07/13] libflash/libffs: Always add entries to the end of the TOC   Cyril Bur
• [Skiboot] [RFC PATCH 08/13] libflash/libffs: Remove the 'sides' from the FFS TOC generation code   Cyril Bur
• [Skiboot] [RFC PATCH 09/13] libflash/libffs: Remove backup partition from TOC generation code   Cyril Bur
• [Skiboot] [RFC PATCH 10/13] libflash/libffs: Switch to storing header entries in an array   Cyril Bur
• [Skiboot] [RFC PATCH 11/13] libflash/libffs: Refcount ffs entries   Cyril Bur
• [Skiboot] [RFC PATCH 12/13] libflash/libffs: Allow caller to specifiy header partition   Cyril Bur
• [Skiboot] [RFC PATCH 13/13] external/ffspart: Use new interface   Cyril Bur
• [Skiboot] [PATCH] blocklevel_info: Refactor the passing of output data   William Kennington
• [Skiboot] [PATCH] flash: Support adding the no-erase property to flash   William A. Kennington III
• [Skiboot] [PATCH v2] hw/p8-i2c: Fix OCC locking   Stewart Smith
• [Skiboot] [PATCH v2] hw/p8-i2c: Fix OCC locking   Stewart Smith
• [Skiboot] [PATCH 0/6] Debian Stretch and modern GCC/binutils fixes   Stewart Smith
• [Skiboot] [PATCH v2] slw: Modify the power9 stop0_lite latency & residency   Stewart Smith
• [Skiboot] [PATCH 00/13] UBSan/LeakSanitizer cleanup   Stewart Smith
• [Skiboot] [PATCH] hw/npu2-hw-procedures.c: Update PHY_RESET procedure   Stewart Smith
• [Skiboot] [RFC PATCH 03/13] external/pflash: Use ffs_entry_user_to_string() to standardise flag strings   Stewart Smith
• [Skiboot] [PATCH 1/1] vas: export chip-id to vas platform device   Sukadev Bhattiprolu
• [Skiboot] [PATCH 1/1] vas: export chip-id to vas platform device   Michael Neuling
• [Skiboot] [PATCH 1/1] vas: export chip-id to vas platform device   Sukadev Bhattiprolu
• [Skiboot] [RFC PATCH 03/13] external/pflash: Use ffs_entry_user_to_string() to standardise flag strings   Cyril Bur
• [Skiboot] [PATCH 0/3] misc idle fixes   Nicholas Piggin
• [Skiboot] [PATCH 1/3] idle: user context state loss flags fix for stop states   Nicholas Piggin
• [Skiboot] [PATCH 2/3] idle: disable stop*_lite POWER9 idle states for Mambo platform   Nicholas Piggin
• [Skiboot] [PATCH 3/3] init: add missing sync_icache after exception vector patching   Nicholas Piggin
• [Skiboot] [PATCH] p8-i2c: Fix random data corruption   Oliver O'Halloran
• [Skiboot] [PATCH 0/3] npu2: PHY initialization updates   Reza Arbab
• [Skiboot] [PATCH 1/3] npu2: hw-procedures: Add comments denoting procedure number   Reza Arbab
• [Skiboot] [PATCH 2/3] npu2: hw-procedures: Change rx_pr_phase_step value   Reza Arbab
• [Skiboot] [PATCH 3/3] npu2: hw-procedures: Update PHY DC calibration procedure   Reza Arbab
• [Skiboot] [PATCH 3/3] npu2: hw-procedures: Update PHY DC calibration procedure   Andrew Donnellan
• [Skiboot] [PATCH] platform/witherspoon: Remove PHB4_SHARED_SLOT_IDX_WITHERSPOON constant   Oliver O'Halloran
• [Skiboot] [PATCH 1/1] vas: export chip-id to vas platform device   Stewart Smith
• [Skiboot] [PATCH] hw/npu2.c: Add ibm, nvlink-speed device-tree property   Stewart Smith
• [Skiboot] [PATCH] p8-i2c: Fix random data corruption   Stewart Smith
• [Skiboot] skiboot 5.8 released   Stewart Smith
• [Skiboot] [PATCH] platform/witherspoon: Add slot names to table   Oliver O'Halloran
• [Skiboot] [PATCH 0/4] Add support to hdat i2c array version 2 in P9   Claudio Carvalho
• [Skiboot] [PATCH 1/4] hdata/i2c: ignore i2c devs marked as unknown in the hdat   Claudio Carvalho
• [Skiboot] [PATCH 2/4] hdata/i2c: update the list of known i2c devs as of version 2   Claudio Carvalho
• [Skiboot] [PATCH 3/4] hdata/i2c: ignore the secure window and physical presence i2c devs   Claudio Carvalho
• [Skiboot] [PATCH 4/4] hdata/i2c: add support to the i2c array version 2   Claudio Carvalho
• [Skiboot] [PATCH 00/13] libstb: simplify the initialization of cvc drivers   Claudio Carvalho
• [Skiboot] [PATCH 01/13] core/flash: extern function to get the name of a PNOR partition   Claudio Carvalho
• [Skiboot] [PATCH 02/13] libstb/stb.c: change sb_verify() to use flash_lookup_resource_name()   Claudio Carvalho
• [Skiboot] [PATCH 03/13] libstb/stb.c: change tb_measure() to use flash_lookup_resource_name()   Claudio Carvalho
• [Skiboot] [PATCH 04/13] libstb: rename rom_driver_ops struct to container_verification_code   Claudio Carvalho
• [Skiboot] [PATCH 05/13] libstb: rename drivers/romcode.* to cvc/c1vc.*   Claudio Carvalho
• [Skiboot] [PATCH 06/13] libstb: rename drivers/sw_driver.* to cvc/c1vc_mbedtls.*   Claudio Carvalho
• [Skiboot] [PATCH 07/13] libstb: move drivers/sha512.* to mbedtls/sha512.*   Claudio Carvalho
• [Skiboot] [PATCH 08/13] libstb: clean up the force-secure-mode and force-trusted-mode from nvram   Claudio Carvalho
• [Skiboot] [PATCH 09/13] libstb: move cvc initialization to stb.c   Claudio Carvalho
• [Skiboot] [PATCH 10/13] libstb/stb.c: free cvc allocated memory   Claudio Carvalho
• [Skiboot] [PATCH 11/13] libstb: check container version before using it   Claudio Carvalho
• [Skiboot] [PATCH 12/13] libstb/stb.c: fix trustedboot abort   Claudio Carvalho
• [Skiboot] [PATCH 13/13] libstb/stb.c: fix log messages   Claudio Carvalho
• [Skiboot] [PATCH 1/3] npu2: hw-procedures: Add comments denoting procedure number   Alistair Popple
• [Skiboot] [PATCH 2/3] npu2: hw-procedures: Change rx_pr_phase_step value   Alistair Popple
• [Skiboot] [PATCH v2 0/5] hdata/i2c: add support to i2c array version 2 in P9   Claudio Carvalho
• [Skiboot] [PATCH v2 1/5] hdata/i2c: add __packed to the host_i2c_hdr structure   Claudio Carvalho
• [Skiboot] [PATCH v2 2/5] hdata/i2c: ignore i2c devs marked as unknown in the hdat   Claudio Carvalho
• [Skiboot] [PATCH v2 3/5] hdata/i2c: update the list of known i2c devs as of version 2   Claudio Carvalho
• [Skiboot] [PATCH v2 4/5] hdata/i2c: ignore the secure window and physical presence i2c devs   Claudio Carvalho
• [Skiboot] [PATCH v2 5/5] hdata/i2c: add support to the i2c array version 2   Claudio Carvalho
• [Skiboot] [PATCH v2 00/14] libstb: simplify the initialization of cvc drivers   Claudio Carvalho
• [Skiboot] [PATCH v2 01/14] libstb/stb.c: remove macros used to force secure-mode and trusted-mode   Claudio Carvalho
• [Skiboot] [PATCH v2 02/14] core/flash: extern function to get the name of a PNOR partition   Claudio Carvalho
• [Skiboot] [PATCH v2 03/14] libstb/stb.c: change sb_verify() to use flash_lookup_resource_name()   Claudio Carvalho
• [Skiboot] [PATCH v2 04/14] libstb/stb.c: change tb_measure() to use flash_lookup_resource_name()   Claudio Carvalho
• [Skiboot] [PATCH v2 05/14] libstb: rename rom_driver_ops struct to container_verification_code   Claudio Carvalho
• [Skiboot] [PATCH v2 06/14] libstb: rename drivers/romcode.* to cvc/c1vc.*   Claudio Carvalho
• [Skiboot] [PATCH v2 07/14] libstb: rename drivers/sw_driver.* to cvc/c1vc_mbedtls.*   Claudio Carvalho
• [Skiboot] [PATCH v2 08/14] libstb: move drivers/sha512.* to mbedtls/sha512.*   Claudio Carvalho
• [Skiboot] [PATCH v2 09/14] libstb: clean up the force-secure-mode and force-trusted-mode from nvram   Claudio Carvalho
• [Skiboot] [PATCH v2 10/14] libstb: move cvc initialization to stb.c   Claudio Carvalho
• [Skiboot] [PATCH v2 11/14] libstb/stb.c: free cvc allocated memory   Claudio Carvalho
• [Skiboot] [PATCH v2 12/14] libstb: check container version before using it   Claudio Carvalho
• [Skiboot] [PATCH v2 13/14] libstb/stb.c: fix trustedboot abort   Claudio Carvalho
• [Skiboot] [PATCH v2 14/14] libstb/stb.c: fix log messages   Claudio Carvalho
• [Skiboot] [PATCH 0/5] hdata: add and parse the tpmrel structure   Claudio Carvalho
• [Skiboot] [PATCH 1/5] hdata: add secure and trusted boot ntuple to SPIRA-H/S   Claudio Carvalho
• [Skiboot] [PATCH 2/5] hdata/tpmrel.c: add eventlog info to tpm devices   Claudio Carvalho
• [Skiboot] [PATCH 3/5] hdata/spira: add ibm,secureboot node   Claudio Carvalho
• [Skiboot] [PATCH 4/5] hdata/tpmrel.c: add the ibm, container-verification-code node   Claudio Carvalho
• [Skiboot] [PATCH 5/5] hdata/tpmrel.c: add cvc offset nodes   Claudio Carvalho
• [Skiboot] [PATCH 0/3] libstb: add support to ibm,secureboot-v2   Claudio Carvalho
• [Skiboot] [PATCH 1/3] libstb/stb.c: add ibm,secureboot-v2 support   Claudio Carvalho
• [Skiboot] [PATCH 2/3] libstb/stb.c: measure the IMA_CATALOG partition   Claudio Carvalho
• [Skiboot] [PATCH 3/3] tpm_i2c_nuvoton: add nuvoton, npct601 to the compatible property   Claudio Carvalho
• [Skiboot] [PATCH] opal-prd: Add support for runtime OCC reset in ZZ   Shilpasri G Bhat

Last message date: Thu Aug 31 18:26:58 AEST 2017
Archived on: Thu Aug 31 18:27:21 AEST 2017

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...