[Skiboot] [PATCH RFC 1/1] npu2: Enable recoverable data link (no-stall) interrupts

Sam Bobroff sam.bobroff at au1.ibm.com
Wed Aug 16 12:37:40 AEST 2017


Allow the NPU2 to trigger "recoverable data link" interrupts
and provide a way to test them via a new vendor capability.

Signed-off-by: Sam Bobroff <sam.bobroff at au1.ibm.com>
---
 hw/npu2.c           | 194 ++++++++++++++++++++++++++++++++++++++++++++--------
 include/npu2-regs.h |  10 +++
 2 files changed, 176 insertions(+), 28 deletions(-)

diff --git a/hw/npu2.c b/hw/npu2.c
index 74e33255..8f265525 100644
--- a/hw/npu2.c
+++ b/hw/npu2.c
@@ -36,6 +36,17 @@
 #include <chip.h>
 #include <phys-map.h>
 #include <nvram.h>
+#include <xive.h>
+
+#define NPU2_IRQ_BASE_SHIFT 13
+#define NPU2_N_DL_IRQS 23
+#define NPU2_N_DL_IRQS_ALIGN 32
+
+#define VENDOR_CAP_START    0x80
+#define VENDOR_CAP_END      0x90
+#define VENDOR_CAP_LEN      0x10
+#define VENDOR_CAP_VERSION  0x01
+#define VENDOR_CAP_PCI_DEV_OFFSET 0x0d
 
 /*
  * NPU2 BAR layout definition. We have 3 stacks and each of them
@@ -53,11 +64,6 @@
  * configure one particular BAR.
  */
 
-#define VENDOR_CAP_START          0x80
-#define VENDOR_CAP_END	          0x90
-
-#define VENDOR_CAP_PCI_DEV_OFFSET 0x0d
-
 static bool is_p9dd1(void)
 {
 	struct proc_chip *chip = next_chip(NULL);
@@ -70,7 +76,7 @@ static bool is_p9dd1(void)
 
 /*
  * We use the indirect method because it uses the same addresses as
- * the MMIO offsets (NPU RING)
+ * the MMIO offsets (NPU2 RING)
  */
 static void npu2_scom_set_addr(uint64_t gcid, uint64_t scom_base,
 			       uint64_t addr, uint64_t size)
@@ -451,7 +457,7 @@ static int __npu2_dev_bind_pci_dev(struct phb *phb __unused,
 
 	pcislot = (char *)dt_prop_get(pci_dt_node, "ibm,slot-label");
 
-	prlog(PR_DEBUG, "NPU: comparing GPU %s and NPU %s\n",
+	prlog(PR_DEBUG, "NPU2: comparing GPU '%s' and NPU2 '%s'\n",
 	      pcislot, dev->slot_label);
 
 	if (streq(pcislot, dev->slot_label))
@@ -485,7 +491,7 @@ static void npu2_dev_bind_pci_dev(struct npu2_dev *dev)
 		}
 	}
 
-	prlog(PR_INFO, "%s: No PCI device for NPU device %04x:00:%02x.0 to bind to. If you expect a GPU to be there, this is a problem.\n",
+	prlog(PR_INFO, "%s: No PCI device for NPU2 device %04x:00:%02x.0 to bind to. If you expect a GPU to be there, this is a problem.\n",
 	      __func__, dev->npu->phb.opal_id, dev->index);
 }
 
@@ -683,15 +689,15 @@ static int npu2_dn_fixup(struct phb *phb,
 	npu2_dn_fixup_gmb(pd->dn, dev);
 	dt_add_property_cells(pd->dn, "ibm,nvlink", dev->dt_node->phandle);
 
-	/* NPU devices require a slot location to associate with GPUs */
+	/* NPU2 devices require a slot location to associate with GPUs */
 	dev->slot_label = dt_prop_get_def(pd->dn, "ibm,slot-label", NULL);
 	if (!dev->slot_label) {
 		/**
 		 * @fwts-label NPUNoPHBSlotLabel
-		 * @fwts-advice No GPU/NPU slot information was found.
+		 * @fwts-advice No GPU/NPU2 slot information was found.
 		 * NVLink2 functionality will not work.
 		 */
-		prlog(PR_ERR, "NPU: Cannot find GPU slot information\n");
+		prlog(PR_ERR, "NPU2: Cannot find GPU slot information\n");
 		return 0;
 	}
 
@@ -1215,8 +1221,8 @@ static void assign_mmio_bars(uint64_t gcid, uint32_t scom, uint64_t reg[2], uint
 }
 
 /*
- *Probe NPU device node and create PCI root device node
- * accordingly. The NPU device node should specify number
+ * Probe NPU2 device node and create PCI root device node
+ * accordingly. The NPU2 deivce node should specify number
  * of links and xscom base address to access links.
  */
 static void npu2_probe_phb(struct dt_node *dn)
@@ -1275,7 +1281,7 @@ static void npu2_probe_phb(struct dt_node *dn)
 	index = dt_prop_get_u32(dn, "ibm,npu-index");
 	phb_index = dt_prop_get_u32(dn, "ibm,phb-index");
 	links = dt_prop_get_u32(dn, "ibm,npu-links");
-	prlog(PR_INFO, "Chip %d Found NPU%d (%d links) at %s\n",
+	prlog(PR_INFO, "NPU2: Chip %d Found NPU2#%d (%d links) at %s\n",
 	      gcid, index, links, path);
 	free(path);
 
@@ -1389,23 +1395,39 @@ static uint32_t npu2_populate_pcie_cap(struct npu2_dev *dev,
 	return start + PCICAP_EXP_SCTL2 + 8;
 }
 
+static int64_t npu2_misc_irq_request(void *dev, struct pci_cfg_reg_filter *pcrf __unused,
+			   uint32_t offset __unused, uint32_t len __unused, uint32_t *data,
+			   bool write)
+{
+	struct pci_virt_device *pvd = dev;
+	struct npu2_dev *ndev = pvd->data;
+	struct npu2 *npu2 = ndev->npu;
+
+	uint32_t idx = (ndev->index * 2) + 1;
+	uint64_t irq_bit = 1ULL << (63 - idx);
+	uint64_t reg = NPU2_REG_OFFSET(NPU2_STACK_MISC, NPU2_BLOCK_MISC, NPU2_MISC_IRQ_REQUEST);
+
+	if (write)
+		npu2_write(npu2, reg, (*data ? irq_bit : 0));
+	else
+		*data = !!(npu2_read(npu2, reg) & irq_bit);
+	return OPAL_SUCCESS;
+}
+
 static uint32_t npu2_populate_vendor_cap(struct npu2_dev *dev,
 					 uint32_t start,
 					 uint32_t prev_cap)
 {
 	struct pci_virt_device *pvd = dev->pvd;
 
-#define NPU2_VENDOR_CAP_VERSION	0x00
-#define NPU2_VENDOR_CAP_LEN	0x10
-
 	/* Capbility list */
 	PCI_VIRT_CFG_INIT_RO(pvd, prev_cap, 1, start);
 	PCI_VIRT_CFG_INIT_RO(pvd, start, 1, PCI_CFG_CAP_ID_VENDOR);
 	dev->vendor_cap = start;
 
 	/* Length and version */
-	PCI_VIRT_CFG_INIT_RO(pvd, start + 2, 1, NPU2_VENDOR_CAP_LEN);
-	PCI_VIRT_CFG_INIT_RO(pvd, start + 3, 1, NPU2_VENDOR_CAP_VERSION);
+	PCI_VIRT_CFG_INIT_RO(pvd, start + 2, 1, VENDOR_CAP_LEN);
+	PCI_VIRT_CFG_INIT_RO(pvd, start + 3, 1, VENDOR_CAP_VERSION);
 
 	/*
 	 * Defaults when the trap can't handle the read/write (eg. due
@@ -1423,7 +1445,16 @@ static uint32_t npu2_populate_vendor_cap(struct npu2_dev *dev,
 	/* Link index */
 	PCI_VIRT_CFG_INIT_RO(pvd, start + 0xc, 1, dev->index);
 
-	return start + NPU2_VENDOR_CAP_LEN;
+	/* Note: VENDOR_CAP_PCI_DEV_OFFSET is next at 0x0d
+	 * but it is setup later. */
+
+	/* Allow triggering of interrupts (MISC_IRQ_REQUEST) by a write to config
+	 * space: */
+	pci_virt_add_filter(pvd, start + 0xe, 1,
+	                    PCI_REG_FLAG_READ | PCI_REG_FLAG_WRITE,
+	                    npu2_misc_irq_request, NULL);
+
+	return start + VENDOR_CAP_LEN;
 }
 
 static void npu2_populate_cfg(struct npu2_dev *dev)
@@ -1497,10 +1528,7 @@ static void npu2_populate_cfg(struct npu2_dev *dev)
 	PCI_VIRT_CFG_INIT_RO(pvd, 0x38, 4, 0x00000000);
 
 	/* 0x3c - INT line/pin/Minimal grant/Maximal latency */
-	if (!NPU2DEV_BRICK(dev))
-		PCI_VIRT_CFG_INIT_RO(pvd, PCI_CFG_INT_LINE, 4, 0x00000100);
-	else
-		PCI_VIRT_CFG_INIT_RO(pvd, PCI_CFG_INT_LINE, 4, 0x00000200);
+	PCI_VIRT_CFG_INIT_RO(pvd, PCI_CFG_INT_LINE, 4, 0x00000100); /* INT A */
 
 	/* PCIE and vendor specific capability */
 	pos = npu2_populate_pcie_cap(dev, 0x40, PCI_CFG_CAP);
@@ -1597,6 +1625,43 @@ static void npu2_populate_devices(struct npu2 *p,
 	}
 }
 
+static void npu2_add_interrupt_map(struct npu2 *p,
+				  struct dt_node *dn)
+{
+	struct dt_node *npu2_dn, *link, *phb_dn;
+	uint32_t npu2_phandle, index = 0, i;
+	uint32_t icsp = get_ics_phandle();
+	uint32_t *map;
+	size_t map_size;
+	uint32_t mask[] = {0xff00, 0x0, 0x0, 0x7};
+	int nlinks = 0;
+
+	npu2_phandle = dt_prop_get_u32(dn, "ibm,npcq");
+	assert((npu2_dn = dt_find_by_phandle(dt_root, npu2_phandle)));
+	assert((phb_dn = p->phb.dt_node));
+	dt_for_each_compatible(npu2_dn, link, "ibm,npu-link") {
+		nlinks++;
+	}
+	map_size = 7 * sizeof(*map) * nlinks;
+	map = malloc(map_size);
+	index = 0;
+	dt_for_each_compatible(npu2_dn, link, "ibm,npu-link") {
+		i = index * 7;
+		map[i + 0] = (p->devices[index].bdfn << 8);
+		map[i + 1] = 0;
+		map[i + 2] = 0;
+
+		map[i + 3] = 1; /* INT A */
+		map[i + 4] = icsp; /* interrupt-parent */
+		map[i + 5] = p->base_lsi + (index * 2) + 1; /* NDL No-Stall Event */
+		map[i + 6] = 0; /* 0 = EDGE, 1 = LEVEL. */
+		index++;
+	}
+	dt_add_property(phb_dn, "interrupt-map", map, map_size);
+	free(map);
+	dt_add_property(phb_dn, "interrupt-map-mask", mask, sizeof(mask));
+}
+
 static void npu2_add_phb_properties(struct npu2 *p)
 {
 	struct dt_node *np = p->phb.dt_node;
@@ -1617,7 +1682,7 @@ static void npu2_add_phb_properties(struct npu2 *p)
 	dt_add_property_cells(np, "clock-frequency", 0x200, 0);
         dt_add_property_cells(np, "interrupt-parent", icsp);
 
-	/* NPU PHB properties */
+	/* NPU2 PHB properties */
 	dt_add_property_cells(np, "ibm,opal-num-pes",
 			      NPU2_MAX_PE_NUM);
 	dt_add_property_cells(np, "ibm,opal-reserved-pe",
@@ -1641,6 +1706,77 @@ static void npu2_add_phb_properties(struct npu2 *p)
 			      hi32(mm_size), lo32(mm_size));
 }
 
+static uint64_t npu2_ipi_attributes(struct irq_source *is __unused, uint32_t isn __unused)
+{
+	return IRQ_ATTR_TARGET_LINUX;
+}
+
+static char *npu2_ipi_name(struct irq_source *is, uint32_t isn)
+{
+	struct npu2 *p = is->data;
+	uint32_t idx = isn - p->base_lsi;
+	const char *name;
+
+	switch (idx) {
+	case 0: name = "NDL 0 Stall Event (brick 0)"; break;
+	case 1: name = "NDL 0 No-Stall Event (brick 0)"; break;
+	case 2: name = "NDL 1 Stall Event (brick 1)"; break;
+	case 3: name = "NDL 1 No-Stall Event (brick 1)"; break;
+	case 4: name = "NDL 2 Stall Event (brick 2)"; break;
+	case 5: name = "NDL 2 No-Stall Event (brick 2)"; break;
+	case 6: name = "NDL 5 Stall Event (brick 3)"; break;
+	case 7: name = "NDL 5 No-Stall Event (brick 3)"; break;
+	case 8: name = "NDL 4 Stall Event (brick 4)"; break;
+	case 9: name = "NDL 4 No-Stall Event (brick 4)"; break;
+	case 10: name = "NDL 3 Stall Event (brick 5)"; break;
+	case 11: name = "NDL 3 No-Stall Event (brick 5)"; break;
+	case 12: name = "NTL 0 Event"; break;
+	case 13: name = "NTL 1 Event"; break;
+	case 14: name = "NTL 2 Event"; break;
+	case 15: name = "NTL 3 Event"; break;
+	case 16: name = "NTL 4 Event"; break;
+	case 17: name = "NTL 5 Event"; break;
+	case 18: name = "TCE Event"; break;
+	case 19: name = "ATS Event"; break;
+	case 20: name = "CQ Event"; break;
+	case 21: name = "MISC Event"; break;
+	case 22: name = "NMMU Local Xstop"; break;
+	default: name = "Unknown";
+	}
+	return strdup(name);
+}
+
+static const struct irq_source_ops npu2_ipi_ops = {
+	.attributes	= npu2_ipi_attributes,
+	.name = npu2_ipi_name,
+};
+
+static void npu2_setup_irqs(struct npu2 *p)
+{
+	uint64_t reg, val;
+	void *tp;
+
+	p->base_lsi = xive_alloc_ipi_irqs(p->chip_id, NPU2_N_DL_IRQS, NPU2_N_DL_IRQS_ALIGN);
+	if (p->base_lsi == XIVE_IRQ_ERROR) {
+		prlog(PR_ERR, "NPU2: Failed to allocate interrupt sources, IRQs for NDL No-stall events will not be available.\n");
+		return;
+	}
+	xive_register_ipi_source(p->base_lsi, NPU2_N_DL_IRQS, p, &npu2_ipi_ops );
+
+	/* Set IPI configuration */
+	reg = NPU2_REG_OFFSET(NPU2_STACK_MISC, NPU2_BLOCK_MISC, NPU2_MISC_CFG);
+	val = npu2_read(p, reg);
+	val = SETFIELD(NPU2_MISC_CFG_IPI_PS, val, NPU2_MISC_CFG_IPI_PS_64K);
+	val = SETFIELD(NPU2_MISC_CFG_IPI_OS, val, NPU2_MISC_CFG_IPI_OS_AIX);
+	npu2_write(p, reg, val);
+
+	/* Set IRQ base */
+	reg = NPU2_REG_OFFSET(NPU2_STACK_MISC, NPU2_BLOCK_MISC, NPU2_MISC_IRQ_BASE);
+	tp = xive_get_trigger_port(p->base_lsi);
+	val = ((uint64_t)tp) << NPU2_IRQ_BASE_SHIFT;
+	npu2_write(p, reg, val);
+}
+
 static void npu2_create_phb(struct dt_node *dn)
 {
 	const struct dt_property *prop;
@@ -1678,7 +1814,9 @@ static void npu2_create_phb(struct dt_node *dn)
 	list_head_init(&p->phb.devices);
 	list_head_init(&p->phb.virt_devices);
 
+	npu2_setup_irqs(p);
 	npu2_populate_devices(p, dn);
+	npu2_add_interrupt_map(p, dn);
 	npu2_add_phb_properties(p);
 
 	slot = npu2_slot_create(&p->phb);
@@ -1687,9 +1825,9 @@ static void npu2_create_phb(struct dt_node *dn)
 		/**
 		 * @fwts-label NPUCannotCreatePHBSlot
 		 * @fwts-advice Firmware probably ran out of memory creating
-		 * NPU slot. NVLink functionality could be broken.
+		 * NPU2 slot. NVLink functionality could be broken.
 		 */
-		prlog(PR_ERR, "NPU: Cannot create PHB slot\n");
+		prlog(PR_ERR, "NPU2: Cannot create PHB slot\n");
 	}
 
 	pci_register_phb(&p->phb, OPAL_DYNAMIC_PHB_ID);
@@ -1710,7 +1848,7 @@ void probe_npu2(void)
 		prlog(PR_WARNING, "NPU2: Using ZCAL impedance override = %d\n", nv_zcal_nominal);
 	}
 
-	/* Scan NPU XSCOM nodes */
+	/* Scan NPU2 XSCOM nodes */
 	dt_for_each_compatible(dt_root, np, "ibm,power9-npu")
 		npu2_probe_phb(np);
 
diff --git a/include/npu2-regs.h b/include/npu2-regs.h
index 86e2658a..759404cc 100644
--- a/include/npu2-regs.h
+++ b/include/npu2-regs.h
@@ -286,6 +286,16 @@ void npu2_write_mask(struct npu2 *p, uint64_t reg, uint64_t val, uint64_t mask);
 #define NPU2_MISC_ERR_RPT_HOLD			NPU2_REG_OFFSET(NPU2_STACK_MISC, NPU2_BLOCK_MISC, 0x020)
 #define NPU2_MISC_ERR_RPT_MASK			NPU2_REG_OFFSET(NPU2_STACK_MISC, NPU2_BLOCK_MISC, 0x028)
 #define NPU2_MISC_CFG				NPU2_REG_OFFSET(NPU2_STACK_MISC, NPU2_BLOCK_MISC, 0x030)
+#define   NPU2_MISC_CFG_CONFIG_SYNC_WAIT	PPC_BITMASK(0,4)
+#define   NPU2_MISC_CFG_PERF_CONFIG_ENABLE	PPC_BIT(5)
+#define   NPU2_MISC_CFG_PERF_CONFIG_PE_MASK	PPC_BIT(6)
+#define   NPU2_MISC_CFG_PERF_CONFIG_PE_MATCH	PPC_BITMASK(7,10)
+#define   NPU2_MISC_CFG_IPI_PS			PPC_BIT(11)
+#define   NPU2_MISC_CFG_IPI_PS_4K		0
+#define   NPU2_MISC_CFG_IPI_PS_64K		1
+#define   NPU2_MISC_CFG_IPI_OS			PPC_BIT(12)
+#define   NPU2_MISC_CFG_IPI_OS_AIX		0
+#define   NPU2_MISC_CFG_IPI_OS_LINUX		1
 #define NPU2_MISC_INHIBIT_CFG			NPU2_REG_OFFSET(NPU2_STACK_MISC, NPU2_BLOCK_MISC, 0x038)
 #define NPU2_MISC_FREEZE_ENABLE0		NPU2_REG_OFFSET(NPU2_STACK_MISC, NPU2_BLOCK_MISC, 0x040)
 #define NPU2_MISC_FREEZE_ENABLE1		NPU2_REG_OFFSET(NPU2_STACK_MISC, NPU2_BLOCK_MISC, 0x048)
-- 
2.14.1.2.g4274c698f



More information about the Skiboot mailing list