[Skiboot] [PATCH v2 2/3] npu2: Enable recoverable data link (no-stall) interrupts
Sam Bobroff
sam.bobroff at au1.ibm.com
Fri Aug 18 13:53:09 AEST 2017
Allow the NPU2 to trigger "recoverable data link" interrupts.
Signed-off-by: Sam Bobroff <sam.bobroff at au1.ibm.com>
---
====== Version 1 -> version 2: ======
* Use p->total_devices instead of manually counting them.
* Moved NPU -> NPU2 changes into a separate patch.
* Moved interrupt testing code into a separate patch.
hw/npu2.c | 136 ++++++++++++++++++++++++++++++++++++++++++++++------
include/npu2-regs.h | 10 ++++
2 files changed, 131 insertions(+), 15 deletions(-)
diff --git a/hw/npu2.c b/hw/npu2.c
index 8f5ad7e0..ef3452d4 100644
--- a/hw/npu2.c
+++ b/hw/npu2.c
@@ -36,6 +36,17 @@
#include <chip.h>
#include <phys-map.h>
#include <nvram.h>
+#include <xive.h>
+
+#define NPU2_IRQ_BASE_SHIFT 13
+#define NPU2_N_DL_IRQS 23
+#define NPU2_N_DL_IRQS_ALIGN 32
+
+#define VENDOR_CAP_START 0x80
+#define VENDOR_CAP_END 0x90
+#define VENDOR_CAP_LEN 0x10
+#define VENDOR_CAP_VERSION 0x01
+#define VENDOR_CAP_PCI_DEV_OFFSET 0x0d
/*
* NPU2 BAR layout definition. We have 3 stacks and each of them
@@ -53,11 +64,6 @@
* configure one particular BAR.
*/
-#define VENDOR_CAP_START 0x80
-#define VENDOR_CAP_END 0x90
-
-#define VENDOR_CAP_PCI_DEV_OFFSET 0x0d
-
static bool is_p9dd1(void)
{
struct proc_chip *chip = next_chip(NULL);
@@ -1395,17 +1401,14 @@ static uint32_t npu2_populate_vendor_cap(struct npu2_dev *dev,
{
struct pci_virt_device *pvd = dev->pvd;
-#define NPU2_VENDOR_CAP_VERSION 0x00
-#define NPU2_VENDOR_CAP_LEN 0x10
-
/* Capbility list */
PCI_VIRT_CFG_INIT_RO(pvd, prev_cap, 1, start);
PCI_VIRT_CFG_INIT_RO(pvd, start, 1, PCI_CFG_CAP_ID_VENDOR);
dev->vendor_cap = start;
/* Length and version */
- PCI_VIRT_CFG_INIT_RO(pvd, start + 2, 1, NPU2_VENDOR_CAP_LEN);
- PCI_VIRT_CFG_INIT_RO(pvd, start + 3, 1, NPU2_VENDOR_CAP_VERSION);
+ PCI_VIRT_CFG_INIT_RO(pvd, start + 2, 1, VENDOR_CAP_LEN);
+ PCI_VIRT_CFG_INIT_RO(pvd, start + 3, 1, VENDOR_CAP_VERSION);
/*
* Defaults when the trap can't handle the read/write (eg. due
@@ -1423,7 +1426,7 @@ static uint32_t npu2_populate_vendor_cap(struct npu2_dev *dev,
/* Link index */
PCI_VIRT_CFG_INIT_RO(pvd, start + 0xc, 1, dev->index);
- return start + NPU2_VENDOR_CAP_LEN;
+ return start + VENDOR_CAP_LEN;
}
static void npu2_populate_cfg(struct npu2_dev *dev)
@@ -1497,10 +1500,7 @@ static void npu2_populate_cfg(struct npu2_dev *dev)
PCI_VIRT_CFG_INIT_RO(pvd, 0x38, 4, 0x00000000);
/* 0x3c - INT line/pin/Minimal grant/Maximal latency */
- if (!NPU2DEV_BRICK(dev))
- PCI_VIRT_CFG_INIT_RO(pvd, PCI_CFG_INT_LINE, 4, 0x00000100);
- else
- PCI_VIRT_CFG_INIT_RO(pvd, PCI_CFG_INT_LINE, 4, 0x00000200);
+ PCI_VIRT_CFG_INIT_RO(pvd, PCI_CFG_INT_LINE, 4, 0x00000100); /* INT A */
/* PCIE and vendor specific capability */
pos = npu2_populate_pcie_cap(dev, 0x40, PCI_CFG_CAP);
@@ -1597,6 +1597,39 @@ static void npu2_populate_devices(struct npu2 *p,
}
}
+static void npu2_add_interrupt_map(struct npu2 *p,
+ struct dt_node *dn)
+{
+ struct dt_node *npu2_dn, *link, *phb_dn;
+ uint32_t npu2_phandle, index = 0, i;
+ uint32_t icsp = get_ics_phandle();
+ uint32_t *map;
+ size_t map_size;
+ uint32_t mask[] = {0xff00, 0x0, 0x0, 0x7};
+
+ npu2_phandle = dt_prop_get_u32(dn, "ibm,npcq");
+ assert((npu2_dn = dt_find_by_phandle(dt_root, npu2_phandle)));
+ assert((phb_dn = p->phb.dt_node));
+ map_size = 7 * sizeof(*map) * p->total_devices;
+ map = malloc(map_size);
+ index = 0;
+ dt_for_each_compatible(npu2_dn, link, "ibm,npu-link") {
+ i = index * 7;
+ map[i + 0] = (p->devices[index].bdfn << 8);
+ map[i + 1] = 0;
+ map[i + 2] = 0;
+
+ map[i + 3] = 1; /* INT A */
+ map[i + 4] = icsp; /* interrupt-parent */
+ map[i + 5] = p->base_lsi + (index * 2) + 1; /* NDL No-Stall Event */
+ map[i + 6] = 0; /* 0 = EDGE, 1 = LEVEL. */
+ index++;
+ }
+ dt_add_property(phb_dn, "interrupt-map", map, map_size);
+ free(map);
+ dt_add_property(phb_dn, "interrupt-map-mask", mask, sizeof(mask));
+}
+
static void npu2_add_phb_properties(struct npu2 *p)
{
struct dt_node *np = p->phb.dt_node;
@@ -1641,6 +1674,77 @@ static void npu2_add_phb_properties(struct npu2 *p)
hi32(mm_size), lo32(mm_size));
}
+static uint64_t npu2_ipi_attributes(struct irq_source *is __unused, uint32_t isn __unused)
+{
+ return IRQ_ATTR_TARGET_LINUX;
+}
+
+static char *npu2_ipi_name(struct irq_source *is, uint32_t isn)
+{
+ struct npu2 *p = is->data;
+ uint32_t idx = isn - p->base_lsi;
+ const char *name;
+
+ switch (idx) {
+ case 0: name = "NDL 0 Stall Event (brick 0)"; break;
+ case 1: name = "NDL 0 No-Stall Event (brick 0)"; break;
+ case 2: name = "NDL 1 Stall Event (brick 1)"; break;
+ case 3: name = "NDL 1 No-Stall Event (brick 1)"; break;
+ case 4: name = "NDL 2 Stall Event (brick 2)"; break;
+ case 5: name = "NDL 2 No-Stall Event (brick 2)"; break;
+ case 6: name = "NDL 5 Stall Event (brick 3)"; break;
+ case 7: name = "NDL 5 No-Stall Event (brick 3)"; break;
+ case 8: name = "NDL 4 Stall Event (brick 4)"; break;
+ case 9: name = "NDL 4 No-Stall Event (brick 4)"; break;
+ case 10: name = "NDL 3 Stall Event (brick 5)"; break;
+ case 11: name = "NDL 3 No-Stall Event (brick 5)"; break;
+ case 12: name = "NTL 0 Event"; break;
+ case 13: name = "NTL 1 Event"; break;
+ case 14: name = "NTL 2 Event"; break;
+ case 15: name = "NTL 3 Event"; break;
+ case 16: name = "NTL 4 Event"; break;
+ case 17: name = "NTL 5 Event"; break;
+ case 18: name = "TCE Event"; break;
+ case 19: name = "ATS Event"; break;
+ case 20: name = "CQ Event"; break;
+ case 21: name = "MISC Event"; break;
+ case 22: name = "NMMU Local Xstop"; break;
+ default: name = "Unknown";
+ }
+ return strdup(name);
+}
+
+static const struct irq_source_ops npu2_ipi_ops = {
+ .attributes = npu2_ipi_attributes,
+ .name = npu2_ipi_name,
+};
+
+static void npu2_setup_irqs(struct npu2 *p)
+{
+ uint64_t reg, val;
+ void *tp;
+
+ p->base_lsi = xive_alloc_ipi_irqs(p->chip_id, NPU2_N_DL_IRQS, NPU2_N_DL_IRQS_ALIGN);
+ if (p->base_lsi == XIVE_IRQ_ERROR) {
+ prlog(PR_ERR, "NPU2: Failed to allocate interrupt sources, IRQs for NDL No-stall events will not be available.\n");
+ return;
+ }
+ xive_register_ipi_source(p->base_lsi, NPU2_N_DL_IRQS, p, &npu2_ipi_ops );
+
+ /* Set IPI configuration */
+ reg = NPU2_REG_OFFSET(NPU2_STACK_MISC, NPU2_BLOCK_MISC, NPU2_MISC_CFG);
+ val = npu2_read(p, reg);
+ val = SETFIELD(NPU2_MISC_CFG_IPI_PS, val, NPU2_MISC_CFG_IPI_PS_64K);
+ val = SETFIELD(NPU2_MISC_CFG_IPI_OS, val, NPU2_MISC_CFG_IPI_OS_AIX);
+ npu2_write(p, reg, val);
+
+ /* Set IRQ base */
+ reg = NPU2_REG_OFFSET(NPU2_STACK_MISC, NPU2_BLOCK_MISC, NPU2_MISC_IRQ_BASE);
+ tp = xive_get_trigger_port(p->base_lsi);
+ val = ((uint64_t)tp) << NPU2_IRQ_BASE_SHIFT;
+ npu2_write(p, reg, val);
+}
+
static void npu2_create_phb(struct dt_node *dn)
{
const struct dt_property *prop;
@@ -1678,7 +1782,9 @@ static void npu2_create_phb(struct dt_node *dn)
list_head_init(&p->phb.devices);
list_head_init(&p->phb.virt_devices);
+ npu2_setup_irqs(p);
npu2_populate_devices(p, dn);
+ npu2_add_interrupt_map(p, dn);
npu2_add_phb_properties(p);
slot = npu2_slot_create(&p->phb);
diff --git a/include/npu2-regs.h b/include/npu2-regs.h
index 86e2658a..759404cc 100644
--- a/include/npu2-regs.h
+++ b/include/npu2-regs.h
@@ -286,6 +286,16 @@ void npu2_write_mask(struct npu2 *p, uint64_t reg, uint64_t val, uint64_t mask);
#define NPU2_MISC_ERR_RPT_HOLD NPU2_REG_OFFSET(NPU2_STACK_MISC, NPU2_BLOCK_MISC, 0x020)
#define NPU2_MISC_ERR_RPT_MASK NPU2_REG_OFFSET(NPU2_STACK_MISC, NPU2_BLOCK_MISC, 0x028)
#define NPU2_MISC_CFG NPU2_REG_OFFSET(NPU2_STACK_MISC, NPU2_BLOCK_MISC, 0x030)
+#define NPU2_MISC_CFG_CONFIG_SYNC_WAIT PPC_BITMASK(0,4)
+#define NPU2_MISC_CFG_PERF_CONFIG_ENABLE PPC_BIT(5)
+#define NPU2_MISC_CFG_PERF_CONFIG_PE_MASK PPC_BIT(6)
+#define NPU2_MISC_CFG_PERF_CONFIG_PE_MATCH PPC_BITMASK(7,10)
+#define NPU2_MISC_CFG_IPI_PS PPC_BIT(11)
+#define NPU2_MISC_CFG_IPI_PS_4K 0
+#define NPU2_MISC_CFG_IPI_PS_64K 1
+#define NPU2_MISC_CFG_IPI_OS PPC_BIT(12)
+#define NPU2_MISC_CFG_IPI_OS_AIX 0
+#define NPU2_MISC_CFG_IPI_OS_LINUX 1
#define NPU2_MISC_INHIBIT_CFG NPU2_REG_OFFSET(NPU2_STACK_MISC, NPU2_BLOCK_MISC, 0x038)
#define NPU2_MISC_FREEZE_ENABLE0 NPU2_REG_OFFSET(NPU2_STACK_MISC, NPU2_BLOCK_MISC, 0x040)
#define NPU2_MISC_FREEZE_ENABLE1 NPU2_REG_OFFSET(NPU2_STACK_MISC, NPU2_BLOCK_MISC, 0x048)
--
2.14.1.2.g4274c698f
More information about the Skiboot
mailing list