November 2017 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Wed Nov 1 16:59:43 AEDT 2017
Ending: Thu Nov 30 23:50:51 AEDT 2017
Messages: 392

• [Skiboot] [PATCH 0/2] Support runtime OCC reset/load in ZZ   Shilpasri G Bhat
• [Skiboot] [PATCH 0/3] libstb: add support to ibm,secureboot-v2   Claudio Carvalho
• [Skiboot] [PATCH 0/3] npu2: Additional hw glitch mitigation   Reza Arbab
• [Skiboot] [PATCH 0/3] npu2: Additional hw glitch mitigation   Stewart Smith
• [Skiboot] [PATCH 0/4] Bug fix and coverity fixes   Cyril Bur
• [Skiboot] [PATCH 00/18] move direct controls out of fast-reboot,   Nicholas Piggin
• [Skiboot] [PATCH 00/18] move direct controls out of fast-reboot,   Nicholas Piggin
• [Skiboot] [PATCH 00/19] libstb: add support for secure and trusted boot in P9   Claudio Carvalho
• [Skiboot] [PATCH 01/13] gard: show: Remove "Res Recovery" field   Oliver O'Halloran
• [Skiboot] [PATCH 01/18] fast-reboot: restore SMT priority on spin loop exit   Nicholas Piggin
• [Skiboot] [PATCH 01/19] hdata: add secure and trusted boot ntuple to SPIRA-H/S   Claudio Carvalho
• [Skiboot] [PATCH 01/19] hdata: add secure and trusted boot ntuple to SPIRA-H/S   Oliver
• [Skiboot] [PATCH 01/19] hdata: add secure and trusted boot ntuple to SPIRA-H/S   Vasant Hegde
• [Skiboot] [PATCH 02/13] gard: Update chip unit data   Oliver O'Halloran
• [Skiboot] [PATCH 02/18] fast-reboot: factor out direct control loops for sreset   Nicholas Piggin
• [Skiboot] [PATCH 02/19] hdata/spira: add ibm, secureboot node in P9   Claudio Carvalho
• [Skiboot] [PATCH 02/19] hdata/spira: add ibm, secureboot node in P9   Oliver
• [Skiboot] [PATCH 02/19] hdata/spira: add ibm, secureboot node in P9   Claudio Carvalho
• [Skiboot] [PATCH 02/19] hdata/spira: add ibm, secureboot node in P9   Vasant Hegde
• [Skiboot] [PATCH 02/19] hdata/spira: add ibm, secureboot node in P9   Oliver
• [Skiboot] [PATCH 03/13] gard: Add P9 support   Oliver O'Halloran
• [Skiboot] [PATCH 03/18] fast-reboot: remove last man standing logic   Nicholas Piggin
• [Skiboot] [PATCH 03/19] hdata/tpmrel.c: add firmware event log info to the tpm node   Claudio Carvalho
• [Skiboot] [PATCH 03/19] hdata/tpmrel.c: add firmware event log info to the tpm node   Oliver
• [Skiboot] [PATCH 03/19] hdata/tpmrel.c: add firmware event log info to the tpm node   Stewart Smith
• [Skiboot] [PATCH 03/19] hdata/tpmrel.c: add firmware event log info to the tpm node   Vasant Hegde
• [Skiboot] [PATCH 04/13] gard: Replace is_valid_id with is_valid_record()   Oliver O'Halloran
• [Skiboot] [PATCH 04/18] fast-reboot: move de-asserting of special wakeups to the initiator   Nicholas Piggin
• [Skiboot] [PATCH 04/19] hdata/tpmrel.c: register CVC services during HDAT parsing   Claudio Carvalho
• [Skiboot] [PATCH 04/19] hdata/tpmrel.c: register CVC services during HDAT parsing   Oliver
• [Skiboot] [PATCH 04/19] hdata/tpmrel.c: register CVC services during HDAT parsing   Stewart Smith
• [Skiboot] [PATCH 04/19] hdata/tpmrel.c: register CVC services during HDAT parsing   Vasant Hegde
• [Skiboot] [PATCH 04/19] hdata/tpmrel.c: register CVC services during HDAT parsing   Claudio Carvalho
• [Skiboot] [PATCH 04/19] hdata/tpmrel.c: register CVC services during HDAT parsing   Claudio Carvalho
• [Skiboot] [PATCH 04/19] hdata/tpmrel.c: register CVC services during HDAT parsing   Claudio Carvalho
• [Skiboot] [PATCH 04/19] hdata/tpmrel.c: register CVC services during HDAT parsing   Oliver
• [Skiboot] [PATCH 04/19] hdata/tpmrel.c: register CVC services during HDAT parsing   Vasant Hegde
• [Skiboot] [PATCH 05/13] gard: Add iterators   Oliver O'Halloran
• [Skiboot] [PATCH 05/18] fast-reboot: clean up some common cpu iteration processes with macros   Nicholas Piggin
• [Skiboot] [PATCH 05/19] libstb/cvc: add function wrappers to call into CVC services   Claudio Carvalho
• [Skiboot] [PATCH 06/13] gard: Use iterators for count_record()   Oliver O'Halloran
• [Skiboot] [PATCH 06/18] fast-reboot: factor out the mambo sreset code   Nicholas Piggin
• [Skiboot] [PATCH 06/19] libstb: move drivers/sha512.* to mbedtls directory   Claudio Carvalho
• [Skiboot] [PATCH 07/13] gard: {list, show}: Fix the Type field in the output   Oliver O'Halloran
• [Skiboot] [PATCH 07/18] fast-reboot: add sreset initiation error handling   Nicholas Piggin
• [Skiboot] [PATCH 07/19] libstb: import stb_init() breaking it into multiple files   Claudio Carvalho
• [Skiboot] [PATCH 08/13] gard: list: Improve output   Oliver O'Halloran
• [Skiboot] [PATCH 08/18] fast-reboot: make spin loops consistent and SMT friendly   Nicholas Piggin
• [Skiboot] [PATCH 08/19] libstb/cvc.c: import softrom behavior from drivers/sw_driver.c   Claudio Carvalho
• [Skiboot] [PATCH 08/19] libstb/cvc.c: import softrom behavior from drivers/sw_driver.c   Oliver
• [Skiboot] [PATCH 08/19] libstb/cvc.c: import softrom behavior from drivers/sw_driver.c   Claudio Carvalho
• [Skiboot] [PATCH 08/19] libstb/cvc.c: import softrom behavior from drivers/sw_driver.c   Claudio Carvalho
• [Skiboot] [PATCH 08/19] libstb/cvc.c: import softrom behavior from drivers/sw_driver.c   Oliver
• [Skiboot] [PATCH 09/13] gard: Add path parsing support   Oliver O'Halloran
• [Skiboot] [PATCH 09/18] fast-reboot: add sreset timeout detection and handling   Nicholas Piggin
• [Skiboot] [PATCH 09/19] core/flash.c: extern function to get the name of a PNOR partition   Claudio Carvalho
• [Skiboot] [PATCH 1/2] hdata: Fix copying GEN4 lane equalisation settings   Michael Neuling
• [Skiboot] [PATCH 1/2] hdata: Fix copying GEN4 lane equalisation settings   Stewart Smith
• [Skiboot] [PATCH 1/2] hw/npu2: Implement logging HMI actions   Balbir Singh
• [Skiboot] [PATCH 1/2] opal-prd: Add support for runtime OCC reset in ZZ   Shilpasri G Bhat
• [Skiboot] [PATCH 1/2] opal-prd: Add support for runtime OCC reset in ZZ   Vasant Hegde
• [Skiboot] [PATCH 1/2] pci: Track peers of slots   Russell Currey
• [Skiboot] [PATCH 1/2] pci: Track peers of slots   Stewart Smith
• [Skiboot] [PATCH 1/2] phb4: Fix lost bit in PE number on config accesses   Benjamin Herrenschmidt
• [Skiboot] [PATCH 1/2] phb4: Fix lost bit in PE number on config accesses   Stewart Smith
• [Skiboot] [PATCH 1/2] phb4: Init changes   Michael Neuling
• [Skiboot] [PATCH 1/2] phb4: set PHB CMPM registers for tunneled operations   Benjamin Herrenschmidt
• [Skiboot] [PATCH 1/2] phb4: set PHB CMPM registers for tunneled operations   Philippe Bergheaud
• [Skiboot] [PATCH 1/2] phb4: set PHB CMPM registers for tunneled operations   Benjamin Herrenschmidt
• [Skiboot] [PATCH 1/2] phb4: set PHB CMPM registers for tunneled operations   Philippe Bergheaud
• [Skiboot] [PATCH 1/2] SLW: Disable deep state on p9_stop_api failure   Akshay Adiga
• [Skiboot] [PATCH 1/3] npu2: Add npu2_write_mask_4b()   Reza Arbab
• [Skiboot] [PATCH 1/3] npu2: Add npu2_write_mask_4b()   alistair at popple.id.au
• [Skiboot] [PATCH 1/3] npu2: Add npu2_write_mask_4b()   Balbir Singh
• [Skiboot] [PATCH 1/3] npu2: Add npu2_write_mask_4b()   Stewart Smith
• [Skiboot] [PATCH 1/3] npu2: hw-procedures: Add obus_brick_index()   Reza Arbab
• [Skiboot] [PATCH 1/3] npu2: hw-procedures: Add obus_brick_index()   Alistair Popple
• [Skiboot] [PATCH 1/4] libpore: Fix incorrect mtspr instruction generation   Cyril Bur
• [Skiboot] [PATCH 1/4] libpore: Fix incorrect mtspr instruction generation   Stewart Smith
• [Skiboot] [PATCH 1/4] libpore: Fix incorrect mtspr instruction generation   Stewart Smith
• [Skiboot] [PATCH 1/4] libpore: Fix incorrect mtspr instruction generation   Cyril Bur
• [Skiboot] [PATCH 1/5] npu2: Create npu2_write_mcd()   Michael Neuling
• [Skiboot] [PATCH 1/5] npu2: Create npu2_write_mcd()   Balbir Singh
• [Skiboot] [PATCH 1/6] xive: Define API for single-escalation VP mode   Benjamin Herrenschmidt
• [Skiboot] [PATCH 1/8] gard: Allow records with an ID of 0xffffffff   Oliver O'Halloran
• [Skiboot] [PATCH 10/13] gard: create: Allow creating arbitrary GARD records   Oliver O'Halloran
• [Skiboot] [PATCH 10/18] fast-reboot: add more barriers around cpu state changes   Nicholas Piggin
• [Skiboot] [PATCH 10/19] core/init.c: remove redundant calls to verify and measure BOOTKERNEL   Claudio Carvalho
• [Skiboot] [PATCH 11/13] libflash: Fix parity calculation on ARM   Oliver O'Halloran
• [Skiboot] [PATCH 11/18] fast-reboot: remove delay after sreset   Nicholas Piggin
• [Skiboot] [PATCH 11/19] libstb/secureboot.c: import sb_verify() from stb.c   Claudio Carvalho
• [Skiboot] [PATCH 12/13] gard: Always use MTD to access flash   Oliver O'Halloran
• [Skiboot] [PATCH 12/18] fast-reboot: allow mambo fast reboot independent of CPU type   Nicholas Piggin
• [Skiboot] [PATCH 12/19] libstb/trustedboot.c: import tb_measure() from stb.c   Claudio Carvalho
• [Skiboot] [PATCH 13/13] gard: Add OpenBMC vPNOR support   Oliver O'Halloran
• [Skiboot] [PATCH 13/18] fast-reboot: move sreset direct controls to direct-controls.c   Nicholas Piggin
• [Skiboot] [PATCH 13/19] libstb/trustedboot.c: import stb_final() from stb.c   Claudio Carvalho
• [Skiboot] [PATCH 14/18] direct-controls: change p8_sreset_all_others sequence   Nicholas Piggin
• [Skiboot] [PATCH 14/19] tpm_i2c_nuvoton: add nuvoton, npct601 to the compatible property   Claudio Carvalho
• [Skiboot] [PATCH 15/18] direct-controls: p8 implementation of generic direct controls   Nicholas Piggin
• [Skiboot] [PATCH 15/19] libstb/tss: update the list of event types supported   Claudio Carvalho
• [Skiboot] [PATCH 16/18] core/lock: Introduce atomic cmpxchg and implement try_lock with it   Nicholas Piggin
• [Skiboot] [PATCH 16/19] libstb/tpm_chip.c: define pr_fmt and fix messages logged   Claudio Carvalho
• [Skiboot] [PATCH 17/18] core/lock: improve bust_locks   Nicholas Piggin
• [Skiboot] [PATCH 17/19] libstb: integrate changes made to support POWER9   Claudio Carvalho
• [Skiboot] [PATCH 17/19] libstb: integrate changes made to support POWER9   Oliver
• [Skiboot] [PATCH 17/19] libstb: integrate changes made to support POWER9   Claudio Carvalho
• [Skiboot] [PATCH 18/18] core: Add support for quiescing OPAL   Nicholas Piggin
• [Skiboot] [PATCH 18/19] doc: update libstb documentation with POWER9 changes   Claudio Carvalho
• [Skiboot] [PATCH 19/19] libstb: remove junk after code refactoring for P9 support   Claudio Carvalho
• [Skiboot] [PATCH 2/2] core/hmi: Do not call find_core_checkstop_reason() unconditionally   Balbir Singh
• [Skiboot] [PATCH 2/2] opal-prd: occ: Add support for runtime OCC load/start in ZZ   Shilpasri G Bhat
• [Skiboot] [PATCH 2/2] opal-prd: occ: Add support for runtime OCC load/start in ZZ   Vasant Hegde
• [Skiboot] [PATCH 2/2] pci: Shared slot state synchronisation for hot reset   Russell Currey
• [Skiboot] [PATCH 2/2] phb4: Change default GEN3 lane equalisation setting to 0x54   Michael Neuling
• [Skiboot] [PATCH 2/2] phb4: Fix lane equalisation setting   Michael Neuling
• [Skiboot] [PATCH 2/2] phb4: Fix PE mapping of M32 BAR   Benjamin Herrenschmidt
• [Skiboot] [PATCH 2/2] phb4: set PBCQ Tunnel BAR for tunneled operations   Benjamin Herrenschmidt
• [Skiboot] [PATCH 2/2] phb4: set PBCQ Tunnel BAR for tunneled operations   Philippe Bergheaud
• [Skiboot] [PATCH 2/2] phb4: set PBCQ Tunnel BAR for tunneled operations   Benjamin Herrenschmidt
• [Skiboot] [PATCH 2/2] phb4: set PBCQ Tunnel BAR for tunneled operations   Philippe Bergheaud
• [Skiboot] [PATCH 2/2] phb4: set PBCQ Tunnel BAR for tunneled operations   Benjamin Herrenschmidt
• [Skiboot] [PATCH 2/2] phb4: set PBCQ Tunnel BAR for tunneled operations   Philippe Bergheaud
• [Skiboot] [PATCH 2/2] phb4: set PBCQ Tunnel BAR for tunneled operations   Benjamin Herrenschmidt
• [Skiboot] [PATCH 2/2] SCOM restore for DARN and XIVE   Akshay Adiga
• [Skiboot] [PATCH 2/2] SCOM restore for DARN and XIVE   Michael Neuling
• [Skiboot] [PATCH 2/2] SCOM restore for DARN and XIVE   Akshay Adiga
• [Skiboot] [PATCH 2/3] npu2: hw-procedures: Add phy_rx_clock_sel()   Reza Arbab
• [Skiboot] [PATCH 2/3] npu2: hw-procedures: Add phy_rx_clock_sel()   alistair at popple.id.au
• [Skiboot] [PATCH 2/3] npu2: hw-procedures: Add phy_rx_clock_sel()   Frederic Barrat
• [Skiboot] [PATCH 2/3] npu2: hw-procedures: Manipulate IOVALID during training   Reza Arbab
• [Skiboot] [PATCH 2/3] npu2: hw-procedures: Manipulate IOVALID during training   Alistair Popple
• [Skiboot] [PATCH 2/4] core/pcie-slots: Fix coverity possible NULL dereference   Cyril Bur
• [Skiboot] [PATCH 2/4] core/pcie-slots: Fix coverity possible NULL dereference   Stewart Smith
• [Skiboot] [PATCH 2/5] npu2: Refactor BAR setting code   Michael Neuling
• [Skiboot] [PATCH 2/5] npu2: Refactor BAR setting code   Balbir Singh
• [Skiboot] [PATCH 2/5] npu2: Refactor BAR setting code   Michael Neuling
• [Skiboot] [PATCH 2/6] xive: When disabling an EQ, wipe all of its settings   Benjamin Herrenschmidt
• [Skiboot] [PATCH 2/8] gard: Set chip generation based on PVR   Oliver O'Halloran
• [Skiboot] [PATCH 3/3] npu2: hw-procedures: Change phy_rx_clock_sel values   Reza Arbab
• [Skiboot] [PATCH 3/3] npu2: hw-procedures: Change phy_rx_clock_sel values   Alistair Popple
• [Skiboot] [PATCH 3/3] npu2: hw-procedures: Refactor reset_ntl procedure   Reza Arbab
• [Skiboot] [PATCH 3/3] npu2: hw-procedures: Refactor reset_ntl procedure   Balbir Singh
• [Skiboot] [PATCH 3/3] npu2: hw-procedures: Refactor reset_ntl procedure   alistair at popple.id.au
• [Skiboot] [PATCH 3/3] npu2: hw-procedures: Refactor reset_ntl procedure   Stewart Smith
• [Skiboot] [PATCH 3/4] npu2: Remove side effects in assert() calls.   Cyril Bur
• [Skiboot] [PATCH 3/4] npu2: Remove side effects in assert() calls.   Stewart Smith
• [Skiboot] [PATCH 3/5] npu2: MCD refactor   Michael Neuling
• [Skiboot] [PATCH 3/5] npu2: MCD refactor   Balbir Singh
• [Skiboot] [PATCH 3/6] xive: Improve cleaning up of EQs   Benjamin Herrenschmidt
• [Skiboot] [PATCH 3/6] xive: Improve cleaning up of EQs   Benjamin Herrenschmidt
• [Skiboot] [PATCH 3/8] gard: Fix up path parsing   Oliver O'Halloran
• [Skiboot] [PATCH 4/4] phb4: Use the return value of phb4_fenced() in phb4_get_diag_data()   Cyril Bur
• [Skiboot] [PATCH 4/5] phys-map: Rename GPU_MEM to GPU_MEM_4T_DOWN   Michael Neuling
• [Skiboot] [PATCH 4/5] phys-map: Rename GPU_MEM to GPU_MEM_4T_DOWN   Balbir Singh
• [Skiboot] [PATCH 4/6] xive: When disabling a VP, wipe all of its settings   Benjamin Herrenschmidt
• [Skiboot] [PATCH 4/8] gard: Fix max instance count   Oliver O'Halloran
• [Skiboot] [PATCH 5/5] npu2: Move to new GPU memory map   Michael Neuling
• [Skiboot] [PATCH 5/5] npu2: Move to new GPU memory map   Balbir Singh
• [Skiboot] [PATCH 5/5] npu2: Move to new GPU memory map   Michael Neuling
• [Skiboot] [PATCH 5/6] xive: Implement "single escalation" feature   Benjamin Herrenschmidt
• [Skiboot] [PATCH 5/8] gard: Add usage message for -p   Oliver O'Halloran
• [Skiboot] [PATCH 6/6] xive: Quieten debug messages in standard builds   Benjamin Herrenschmidt
• [Skiboot] [PATCH 6/8] gard: Delete stale comment   Oliver O'Halloran
• [Skiboot] [PATCH 7/8] gard: Fix up do_create return values   Oliver O'Halloran
• [Skiboot] [PATCH 8/8] gard: Add tests   Oliver O'Halloran
• [Skiboot] [PATCH] asm/head: Loop after attn   Oliver O'Halloran
• [Skiboot] [PATCH] asm/head: Loop after attn   Stewart Smith
• [Skiboot] [PATCH] capi: move the acknowledge of the HMI interrupt   Stewart Smith
• [Skiboot] [PATCH] capi: update ci store buffers and dma engines   Stewart Smith
• [Skiboot] [PATCH] core/bitmap: fix bitmap iteration limit corruption   Nicholas Piggin
• [Skiboot] [PATCH] core/bitmap: fix bitmap iteration limit corruption   Stewart Smith
• [Skiboot] [PATCH] core/bitmap: fix bitmap iteration limit corruption   Stewart Smith
• [Skiboot] [PATCH] doc: Fix reference to overview in README   Russell Currey
• [Skiboot] [PATCH] doc: Fix reference to overview in README   Stewart Smith
• [Skiboot] [PATCH] external/mambo: Switch qtrace command to use plugins   Nicholas Piggin
• [Skiboot] [PATCH] external/mambo: Switch qtrace command to use plugins   Stewart Smith
• [Skiboot] [PATCH] external/pflash: Fix erasing within a single erase block   Cyril Bur
• [Skiboot] [PATCH] external/pflash: Fix erasing within a single erase block   Stewart Smith
• [Skiboot] [PATCH] external/test: Display test dir on failure   Oliver O'Halloran
• [Skiboot] [PATCH] external/test: Display test dir on failure   Stewart Smith
• [Skiboot] [PATCH] external/test: Print the name of each test   Oliver O'Halloran
• [Skiboot] [PATCH] ffspart/pflash: fix tests for new VOLATILE flag   Stewart Smith
• [Skiboot] [PATCH] ffspart/pflash: fix tests for new VOLATILE flag   Stewart Smith
• [Skiboot] [PATCH] fsp-elog: Reduce verbosity of elog messages   Michael Neuling
• [Skiboot] [PATCH] fsp-elog: Reduce verbosity of elog messages   Vasant Hegde
• [Skiboot] [PATCH] fsp-elog: Reduce verbosity of elog messages   Stewart Smith
• [Skiboot] [PATCH] FSP/CONSOLE: Disable notification on unresponsive consoles   Vasant Hegde
• [Skiboot] [PATCH] fsp: Bail out of HIR if FSP is resetting voluntarily   Ananth N Mavinakayanahalli
• [Skiboot] [PATCH] hdata/vpd: add support for parsing CPU VRML records   Robert Lippert
• [Skiboot] [PATCH] hdata/vpd: add support for parsing CPU VRML records   Stewart Smith
• [Skiboot] [PATCH] hdata: Rename 'fsp-ipl-side' as 'sp-ipl-side'   Stewart Smith
• [Skiboot] [PATCH] hw/imc: alway enable "imc_nest_chip" exports property   Madhavan Srinivasan
• [Skiboot] [PATCH] hw/imc: Check ucode state in all the chip   Madhavan Srinivasan
• [Skiboot] [PATCH] hw/npu2: Implement logging HMI actions   Balbir Singh
• [Skiboot] [PATCH] hw/npu2: Implement logging HMI actions   Alistair Popple
• [Skiboot] [PATCH] hw/npu2: Implement logging HMI actions   Balbir Singh
• [Skiboot] [PATCH] hw/nx: Fix NX BAR assignments   Oliver O'Halloran
• [Skiboot] [PATCH] lpc: Clear pending IRQs at boot   Oliver O'Halloran
• [Skiboot] [PATCH] lpc: Clear pending IRQs at boot   ppaidipe
• [Skiboot] [PATCH] lpc: Clear pending IRQs at boot   Stewart Smith
• [Skiboot] [PATCH] make_version: Fix check for '.version' file   Vaibhav Jain
• [Skiboot] [PATCH] make_version: Fix check for '.version' file   Stewart Smith
• [Skiboot] [PATCH] make check: Make valgrind optional   Michael Ellerman
• [Skiboot] [PATCH] npu2: hw-procedures: Add check_credits procedure   Reza Arbab
• [Skiboot] [PATCH] npu2: hw-procedures: Add check_credits procedure   Alistair Popple
• [Skiboot] [PATCH] npu2: Remove unused npu2_dev struct members   Andrew Donnellan
• [Skiboot] [PATCH] npu2: Remove unused npu2_dev struct members   Reza Arbab
• [Skiboot] [PATCH] npu2: Remove unused npu2_dev struct members   Stewart Smith
• [Skiboot] [PATCH] nvram: Fix 'missing' nvram on FSP systems.   Cyril Bur
• [Skiboot] [PATCH] nvram: Fix 'missing' nvram on FSP systems.   Stewart Smith
• [Skiboot] [PATCH] nvram: Fix 'missing' nvram on FSP systems.   Cyril Bur
• [Skiboot] [PATCH] nvram: Fix 'missing' nvram on FSP systems.   Oliver
• [Skiboot] [PATCH] nvram: Fix 'missing' nvram on FSP systems.   Cyril Bur
• [Skiboot] [PATCH] nvram: Fix 'missing' nvram on FSP systems.   Stewart Smith
• [Skiboot] [PATCH] occ-sensors: Fix up quad/gpu location mixup   Oliver O'Halloran
• [Skiboot] [PATCH] occ-sensors: Fix up quad/gpu location mixup   Shilpasri G Bhat
• [Skiboot] [PATCH] occ-sensors: Fix up quad/gpu location mixup   Stewart Smith
• [Skiboot] [PATCH] OCC: Increase max pstate check on P9 to 255   Stewart Smith
• [Skiboot] [PATCH] OCC: Increase max pstate check on P9 to 255   Vaidyanathan Srinivasan
• [Skiboot] [PATCH] OCC: Increase max pstate check on P9 to 255   Stewart Smith
• [Skiboot] [PATCH] OCC: Increase max pstate check on P9 to 255   Michael Ellerman
• [Skiboot] [PATCH] OCC: Increase max pstate check on P9 to 255   Vaidyanathan Srinivasan
• [Skiboot] [PATCH] OCC: Increase max pstate check on P9 to 255   Stewart Smith
• [Skiboot] [PATCH] OCC: Increase max pstate check on P9 to 255   Michael Ellerman
• [Skiboot] [PATCH] opal-prd: flush after logging to stdio in debug mode   Jeremy Kerr
• [Skiboot] [PATCH] opal-prd: flush after logging to stdio in debug mode   Stewart Smith
• [Skiboot] [PATCH] opal-prd: flush after logging to stdio in debug mode   Jeremy Kerr
• [Skiboot] [PATCH] p8-i2c: Don't write the watermark register at init   Oliver O'Halloran
• [Skiboot] [PATCH] p8-i2c: Don't write the watermark register at init   Stewart Smith
• [Skiboot] [PATCH] p8-i2c: Limit number of retry attempts   Oliver O'Halloran
• [Skiboot] [PATCH] p8-i2c: Limit number of retry attempts   Stewart Smith
• [Skiboot] [PATCH] phb4: Update inits   Michael Neuling
• [Skiboot] [PATCH] phb4: Update inits   Stewart Smith
• [Skiboot] [PATCH] power-mgmt : occ : Add 'freq-domain-indicator' DT property   Abhishek Goel
• [Skiboot] [PATCH] power-mgmt : occ : Add 'freq-domain-indicator' DT property   Abhishek Goel
• [Skiboot] [PATCH] power-mgmt : occ : Add 'freq-domain-indicator' DT property   Vasant Hegde
• [Skiboot] [PATCH] Revert "npu2: hw-procedures: Enable low power mode"   Reza Arbab
• [Skiboot] [PATCH] Revert "npu2: hw-procedures: Enable low power mode"   alistair at popple.id.au
• [Skiboot] [PATCH] Revert "npu2: hw-procedures: Enable low power mode"   Stewart Smith
• [Skiboot] [PATCH] SCOM restore for DARN and XIVE   Akshay Adiga
• [Skiboot] [PATCH] SCOM restore for DARN and XIVE   Stewart Smith
• [Skiboot] [PATCH] SCOM restore for DARN and XIVE   Akshay Adiga
• [Skiboot] [PATCH] SCOM restore for DARN and XIVE   Michael Neuling
• [Skiboot] [PATCH] SCOM restore for DARN and XIVE   Stewart Smith
• [Skiboot] [PATCH] SCOM restore for DARN and XIVE   Oliver
• [Skiboot] [PATCH] SCOM restore for DARN and XIVE   Akshay Adiga
• [Skiboot] [PATCH] sensor-groups: occ: Add support to disable/enable sensor group   Shilpasri G Bhat
• [Skiboot] [PATCH] sensors: occ: Skip counter type of sensors   Oliver
• [Skiboot] [PATCH] sensors: occ: Skip counter type of sensors   Oliver
• [Skiboot] [PATCH] sensors: occ: Skip counter type of sensors   Shilpasri G Bhat
• [Skiboot] [PATCH] sensors: occ: Support reading u64 sensor values   Shilpasri G Bhat
• [Skiboot] [PATCH] sensors: occ: Support reading u64 sensor values   Stewart Smith
• [Skiboot] [PATCH] SLW: Add idle state stop5 for DD2.0 and above   Akshay Adiga
• [Skiboot] [PATCH] SLW: Add idle state stop5 for DD2.0 and above   Stewart Smith
• [Skiboot] [PATCH] SLW: Add idle state stop5 for DD2.0 and above   Nicholas Piggin
• [Skiboot] [PATCH] travis: Add Fedora 27   Stewart Smith
• [Skiboot] [PATCH] travis: Add Fedora 27   Stewart Smith
• [Skiboot] [PATCH] xive: Trivial fix for compilation error when enabling xive debug   Guilherme G. Piccoli
• [Skiboot] [PATCH] xive: Trivial fix for compilation error when enabling xive debug   Stewart Smith
• [Skiboot] [PATCH skiboot] npu: Fix broken fast reset   Reza Arbab
• [Skiboot] [PATCH skiboot] npu: Fix broken fast reset   Stewart Smith
• [Skiboot] [PATCH skiboot] npu: Fix broken fast reset   Andrew Donnellan
• [Skiboot] [PATCH v2 00/14] libstb: simplify the initialization of cvc drivers   Claudio Carvalho
• [Skiboot] [PATCH v2 00/25] move direct controls out of fast-reboot, generalize them, add quiescing   Nicholas Piggin
• [Skiboot] [PATCH v2 01/10] xive: Define API for single-escalation VP mode   Benjamin Herrenschmidt
• [Skiboot] [PATCH v2 01/10] xive: Define API for single-escalation VP mode   Stewart Smith
• [Skiboot] [PATCH v2 01/25] fast-reboot: restore SMT priority on spin loop exit   Nicholas Piggin
• [Skiboot] [PATCH v2 02/10] xive: When disabling an EQ, wipe all of its settings   Benjamin Herrenschmidt
• [Skiboot] [PATCH v2 02/25] fast-reboot: factor out direct control loops for sreset   Nicholas Piggin
• [Skiboot] [PATCH v2 03/10] xive: Improve cleaning up of EQs   Benjamin Herrenschmidt
• [Skiboot] [PATCH v2 03/25] fast-reboot: remove last man standing logic   Nicholas Piggin
• [Skiboot] [PATCH v2 04/10] xive: When disabling a VP, wipe all of its settings   Benjamin Herrenschmidt
• [Skiboot] [PATCH v2 04/25] fast-reboot: clean up some common cpu iteration processes with macros   Nicholas Piggin
• [Skiboot] [PATCH v2 05/10] xive: Implement "single escalation" feature   Benjamin Herrenschmidt
• [Skiboot] [PATCH v2 05/25] fast-reboot: factor out the mambo sreset code   Nicholas Piggin
• [Skiboot] [PATCH v2 06/10] xive: Quieten debug messages in standard builds   Benjamin Herrenschmidt
• [Skiboot] [PATCH v2 06/25] fast-reboot: add sreset_all_others error handling   Nicholas Piggin
• [Skiboot] [PATCH v2 07/10] xive: Properly reserve built-in VPs in non-group mode   Benjamin Herrenschmidt
• [Skiboot] [PATCH v2 07/25] fast-reboot: make spin loops consistent and SMT friendly   Nicholas Piggin
• [Skiboot] [PATCH v2 08/10] xive: Warn on valid VPs found in abnormal cases   Benjamin Herrenschmidt
• [Skiboot] [PATCH v2 08/25] fast-reboot: add sreset timeout detection and handling   Nicholas Piggin
• [Skiboot] [PATCH v2 09/10] xive: Don't bother cleaning up disabled EQs in reset   Benjamin Herrenschmidt
• [Skiboot] [PATCH v2 09/25] fast-reboot: add more barriers around cpu state changes   Nicholas Piggin
• [Skiboot] [PATCH v2 1/2] hdata: Add memory hierarchy under xscom node   Vasant Hegde
• [Skiboot] [PATCH v2 1/2] npu2: Print bdfn in NPU2DEV* logging macros   Reza Arbab
• [Skiboot] [PATCH v2 1/2] npu2: Print bdfn in NPU2DEV* logging macros   Alistair Popple
• [Skiboot] [PATCH v2 1/2] npu2: Print bdfn in NPU2DEV* logging macros   Balbir Singh
• [Skiboot] [PATCH v2 1/5] npu2: Create npu2_write_mcd()   Michael Neuling
• [Skiboot] [PATCH v2 1/5] npu2: Create npu2_write_mcd()   Stewart Smith
• [Skiboot] [PATCH v2 10/10] xive: Remove obsolete comment   Benjamin Herrenschmidt
• [Skiboot] [PATCH v2 10/25] fast-reboot: remove delay after sreset   Nicholas Piggin
• [Skiboot] [PATCH v2 11/25] fast-reboot: inline fast_reset_p8 into fast_reboot   Nicholas Piggin
• [Skiboot] [PATCH v2 12/25] fast-reboot: move de-asserting of special wakeups to the initiator   Nicholas Piggin
• [Skiboot] [PATCH v2 13/25] fast-reboot: allow mambo fast reboot independent of CPU type   Nicholas Piggin
• [Skiboot] [PATCH v2 14/25] fast-reboot: move sreset direct controls to direct-controls.c   Nicholas Piggin
• [Skiboot] [PATCH v2 15/25] direct-controls: change p8_sreset_all_others sequence   Nicholas Piggin
• [Skiboot] [PATCH v2 16/25] direct-controls: p8 implementation of generic direct controls   Nicholas Piggin
• [Skiboot] [PATCH v2 17/25] direct-controls: add xscom error handling for p8   Nicholas Piggin
• [Skiboot] [PATCH v2 18/25] core/lock: Introduce atomic cmpxchg and implement try_lock with it   Nicholas Piggin
• [Skiboot] [PATCH v2 19/25] core/lock: improve bust_locks   Nicholas Piggin
• [Skiboot] [PATCH v2 2/2] npu2: hw-procedures: Add check_credits procedure   Reza Arbab
• [Skiboot] [PATCH v2 2/2] npu2: hw-procedures: Add check_credits procedure   Alistair Popple
• [Skiboot] [PATCH v2 2/2] npu2: hw-procedures: Add check_credits procedure   Michael Neuling
• [Skiboot] [PATCH v2 2/2] npu2: hw-procedures: Add check_credits procedure   Reza Arbab
• [Skiboot] [PATCH v2 2/2] npu2: hw-procedures: Add check_credits procedure   Stewart Smith
• [Skiboot] [PATCH v2 2/2] npu2: hw-procedures: Add check_credits procedure   Stewart Smith
• [Skiboot] [PATCH v2 2/2] npu2: hw-procedures: Add check_credits procedure   Reza Arbab
• [Skiboot] [PATCH v2 2/2] npu2: hw-procedures: Add check_credits procedure   Balbir Singh
• [Skiboot] [PATCH v2 2/2] npu2: hw-procedures: Add check_credits procedure   Reza Arbab
• [Skiboot] [PATCH v2 2/5] npu2: Refactor BAR setting code   Michael Neuling
• [Skiboot] [PATCH v2 20/25] asm/head: add entry/exit calls   Nicholas Piggin
• [Skiboot] [PATCH v2 21/25] asm/head: move opal entry token check into C   Nicholas Piggin
• [Skiboot] [PATCH v2 22/25] core/opal: always verify cpu->pir on entry   Nicholas Piggin
• [Skiboot] [PATCH v2 23/25] core: Add support for quiescing OPAL   Nicholas Piggin
• [Skiboot] [PATCH v2 24/25] fast-reboot: quiesce opal before initiating a fast reboot   Nicholas Piggin
• [Skiboot] [PATCH v2 25/25] fast-reboot: improve failure error messages   Nicholas Piggin
• [Skiboot] [PATCH v2 3/5] npu2: MCD refactor   Michael Neuling
• [Skiboot] [PATCH v2 4/5] phys-map: Rename GPU_MEM to GPU_MEM_4T_DOWN   Michael Neuling
• [Skiboot] [PATCH v2 5/5] npu2: Move to new GPU memory map   Michael Neuling
• [Skiboot] [PATCH V2] fsp: Bail out of HIR if FSP is resetting voluntarily   Ananth N Mavinakayanahalli
• [Skiboot] [PATCH V2] fsp: Bail out of HIR if FSP is resetting voluntarily   Vasant Hegde
• [Skiboot] [PATCH v2] libpore: Fix incorrect mtspr instruction generation   Cyril Bur
• [Skiboot] [PATCH v2] libpore: Fix incorrect mtspr instruction generation   Stewart Smith
• [Skiboot] [PATCH v2] pflash: Support for volatile flag   Stewart Smith
• [Skiboot] [PATCH v2] power-mgmt : occ : Add 'freq-domain-indicator' DT property   Abhishek Goel
• [Skiboot] [PATCH v2] prd: Enable error logging via firmware_request interface   Vasant Hegde
• [Skiboot] [PATCH v2] prd: Log unsupported message type   Vasant Hegde
• [Skiboot] [PATCH v3 00/29] the big fast reboot series, now with p9 support   Nicholas Piggin
• [Skiboot] [PATCH v3 01/29] fast-reboot: restore SMT priority on spin loop exit   Nicholas Piggin
• [Skiboot] [PATCH v3 02/29] fast-reboot: factor out direct control loops for sreset   Nicholas Piggin
• [Skiboot] [PATCH v3 03/29] fast-reboot: remove last man standing logic   Nicholas Piggin
• [Skiboot] [PATCH v3 04/29] fast-reboot: clean up some common cpu iteration processes with macros   Nicholas Piggin
• [Skiboot] [PATCH v3 05/29] fast-reboot: factor out the mambo sreset code   Nicholas Piggin
• [Skiboot] [PATCH v3 06/29] fast-reboot: add sreset_all_others error handling   Nicholas Piggin
• [Skiboot] [PATCH v3 07/29] fast-reboot: make spin loops consistent and SMT friendly   Nicholas Piggin
• [Skiboot] [PATCH v3 08/29] fast-reboot: add sreset timeout detection and handling   Nicholas Piggin
• [Skiboot] [PATCH v3 09/29] fast-reboot: add more barriers around cpu state changes   Nicholas Piggin
• [Skiboot] [PATCH v3 1/2] prd: Add generic response structure inside prd_fw_msg   Vasant Hegde
• [Skiboot] [PATCH v3 1/2] xive: Update inits for DD2.0   Benjamin Herrenschmidt
• [Skiboot] [PATCH v3 1/2] xive: Update inits for DD2.0   Stewart Smith
• [Skiboot] [PATCH v3 10/29] fast-reboot: remove delay after sreset   Nicholas Piggin
• [Skiboot] [PATCH v3 11/29] fast-reboot: inline fast_reset_p8 into fast_reboot   Nicholas Piggin
• [Skiboot] [PATCH v3 12/29] fast-reboot: move de-asserting of special wakeups to the initiator   Nicholas Piggin
• [Skiboot] [PATCH v3 13/29] fast-reboot: allow mambo fast reboot independent of CPU type   Nicholas Piggin
• [Skiboot] [PATCH v3 14/29] fast-reboot: move sreset direct controls to direct-controls.c   Nicholas Piggin
• [Skiboot] [PATCH v3 15/29] direct-controls: change p8_sreset_all_others sequence   Nicholas Piggin
• [Skiboot] [PATCH v3 16/29] direct-controls: p8 implementation of generic direct controls   Nicholas Piggin
• [Skiboot] [PATCH v3 17/29] direct-controls: add xscom error handling for p8   Nicholas Piggin
• [Skiboot] [PATCH v3 18/29] core/lock: Introduce atomic cmpxchg and implement try_lock with it   Nicholas Piggin
• [Skiboot] [PATCH v3 19/29] core/lock: improve bust_locks   Nicholas Piggin
• [Skiboot] [PATCH v3 2/2] prd: Enable error logging via firmware_request interface   Vasant Hegde
• [Skiboot] [PATCH v3 2/2] xive: Fix ability to clear some EQ flags   Benjamin Herrenschmidt
• [Skiboot] [PATCH v3 20/29] asm/head: add entry/exit calls   Nicholas Piggin
• [Skiboot] [PATCH v3 21/29] asm/head: move opal entry token check into C   Nicholas Piggin
• [Skiboot] [PATCH v3 22/29] core/opal: always verify cpu->pir on entry   Nicholas Piggin
• [Skiboot] [PATCH v3 23/29] core: Add support for quiescing OPAL   Nicholas Piggin
• [Skiboot] [PATCH v3 24/29] fast-reboot: quiesce opal before initiating a fast reboot   Nicholas Piggin
• [Skiboot] [PATCH v3 25/29] fast-reboot: improve failure error messages   Nicholas Piggin
• [Skiboot] [PATCH v3 26/29] fast-reboot: move fdt freeing into init   Nicholas Piggin
• [Skiboot] [PATCH v3 27/29] fast-reboot: move boot CPU cleanup logically together with secondaries   Nicholas Piggin
• [Skiboot] [PATCH v3 28/29] fast-reboot: bare bones fast reboot implementation for POWER9   Nicholas Piggin
• [Skiboot] [PATCH v3 29/29] direct-controls: enable fast reboot direct controls for mambo   Nicholas Piggin
• [Skiboot] [PATCH v3] npu2: hw-procedures: Enable low power mode   Stewart Smith
• [Skiboot] [PATCH v3] npu2: hw-procedures: Enable low power mode   Balbir Singh
• [Skiboot] [PATCH v3] platform/astbmc: Do not delete compatible property   Vasant Hegde
• [Skiboot] [PATCH V4 0/4] Fixes for reading DTS sensors of cores in idle state   Shilpasri G Bhat
• [Skiboot] [PATCH V4 0/4] Fixes for reading DTS sensors of cores in idle state   Stewart Smith
• [Skiboot] [PATCH V4 1/4] sensors: dts: Assert special wakeup on idle cores while reading temperature   Shilpasri G Bhat
• [Skiboot] [PATCH V4 2/4] core/direct-controls: wait for core special wkup bit cleared   Shilpasri G Bhat
• [Skiboot] [PATCH V4 3/4] core/direct-controls: add function to read core gated state   Shilpasri G Bhat
• [Skiboot] [PATCH V4 4/4] hw/dts: retry special wakeup operation if core still gated   Shilpasri G Bhat
• [Skiboot] [RFC/PATCH] affinity: Use fabric node ID on most systems   Michael Ellerman
• [Skiboot] [RFC/PATCH] affinity: Use fabric node ID on most systems   Stewart Smith
• [Skiboot] [RFC] hw/npu2: Implement logging HMI actions   Balbir Singh
• [Skiboot] [RFC] hw/npu2: Implement logging HMI actions   Balbir Singh
• [Skiboot] [RFC] hw/npu2: Implement logging HMI actions   Alistair Popple
• [Skiboot] [RFC PATCH] fast-reboot: implement fast reboot for p9   Nicholas Piggin
• [Skiboot] [RFC PATCH] Test new gcc stack protector option   Benjamin Herrenschmidt
• [Skiboot] [trivial PATCH] prd: Log unsupported message type   Vasant Hegde
• [Skiboot] hwmon sensors cleanup   Oliver
• [Skiboot] hwmon sensors cleanup   Shilpasri G Bhat
• [Skiboot] OpenPower gard tool rework   Oliver O'Halloran
• [Skiboot] OpenPower gard tool rework   Cyril Bur
• [Skiboot] OpenPower gard tool rework   Oliver
• [Skiboot] OpenPower gard tool rework   Cyril Bur
• [Skiboot] OpenPower gard tool rework   Stewart Smith
• [Skiboot] OpenPower gard tool rework   Stewart Smith
• [Skiboot] skiboot 5.9.1   Stewart Smith
• [Skiboot] skiboot 5.9.2   Stewart Smith
• [Skiboot] skiboot 5.9.3   Stewart Smith
• [Skiboot] skiboot 5.9.4   Stewart Smith

Last message date: Thu Nov 30 23:50:51 AEDT 2017
Archived on: Thu Nov 30 23:51:14 AEDT 2017

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...