[Skiboot] [PATCH 1/4] libpore: Fix incorrect mtspr instruction generation

[Stewart Smith]

Cyril Bur <cyril.bur at au1.ibm.com> writes:
> From coverity defect 173758:
> CID 173758 (#1 of 1): Unused value (UNUSED_VALUE)
> assigned_value: Assigning value from (uint8_t)i_Rs << 21 to
> mtsprInstOpcode here, but that stored value is overwritten before it can
> be used.
>
> This causes the generated mtspr to always move from register r0 as
> opposed to the function parameter i_Rs.
>
> Luckily the only call to getMtsprInstruction is:
> getMtsprInstruction( 0, (uint16_t)i_regId );
> the first parameter is the register so in an incredible stroke of luck,
> the requirement is to generate a mtspr from r0.
>
> Therefore no bug exists today, this is still a fairly important fix
> because if anyone uses getMtsprInstruction() with a non zero first
> parameter, it will cause them endless headache.
>
> Fixes: CID 173758
> Signed-off-by: Cyril Bur <cyril.bur at au1.ibm.com>
> ---
>  libpore/p9_stop_api.C | 10 ++++------
>  1 file changed, 4 insertions(+), 6 deletions(-)
>
> diff --git a/libpore/p9_stop_api.C b/libpore/p9_stop_api.C
> index 26a14bbf..3f0b248d 100644
> --- a/libpore/p9_stop_api.C
> +++ b/libpore/p9_stop_api.C
> @@ -255,12 +255,10 @@ static uint32_t getOrisInstruction( const uint16_t i_Rs, const uint16_t i_Ra,
>   */
>  static uint32_t getMtsprInstruction( const uint16_t i_Rs, const uint16_t i_Spr )
>  {
> -    uint32_t mtsprInstOpcode = 0;
> -    uint32_t temp = (( i_Spr & 0x03FF ) << 11);
> -    mtsprInstOpcode = (uint8_t)i_Rs << 21;
> -    mtsprInstOpcode = ( temp  & 0x0000F800 ) << 5;
> -    mtsprInstOpcode |= ( temp & 0x001F0000 ) >> 5;
> -    mtsprInstOpcode |= MTSPR_BASE_OPCODE;
> +    uint32_t mtsprInstOpcode = MTSPR_BASE_OPCODE;
> +    uint32_t temp = ((i_Spr & 1F) << 5) | ((i_Spr & 0x8F) >> 5);
> +
> +    mtsprInstOpcode |= ((i_Rs & 0x1F) << 21) | ((temp & 0x03FF) << 11);
>  
>      return SWIZZLE_4_BYTE(mtsprInstOpcode);
>  }


libpore/p9_stop_api.C: In function ‘getMtsprInstruction’:
libpore/p9_stop_api.C:259:31: error: invalid suffix "F" on integer constant
     uint32_t temp = ((i_Spr & 1F) << 5) | ((i_Spr & 0x8F) >> 5);

-- 
Stewart Smith
OPAL Architect, IBM.