December 2011 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Thu Dec 1 00:31:40 EST 2011
Ending: Sat Dec 31 12:03:46 EST 2011
Messages: 1194

• Configurable interrupt sources, and DT bindings   David Gibson
• [PATCH v3 3/5] ARM: vexpress: Add DT support in v2m   Arnd Bergmann
• Pin control mappings for DT   Linus Walleij
• [PATCH v3 3/5] ARM: vexpress: Add DT support in v2m   Pawel Moll
• Configurable interrupt sources, and DT bindings   Rob Herring
• [PATCH v3 2/5] ARM: vexpress: Get rid of MMIO_P2V   Arnd Bergmann
• [PATCH v3 2/5] ARM: vexpress: Get rid of MMIO_P2V   Pawel Moll
• [PATCH v3 3/5] ARM: vexpress: Add DT support in v2m   Arnd Bergmann
• Pin control mappings for DT   Linus Walleij
• [PATCH v3 4/5] ARM: vexpress: Initial RS1 memory map support   Dave Martin
• [PATCH v3 3/5] ARM: vexpress: Add DT support in v2m   Dave Martin
• Pin control mappings for DT   Tony Lindgren
• Pin control mappings for DT   Tony Lindgren
• [PATCH v3 4/5] ARM: vexpress: Initial RS1 memory map support   Pawel Moll
• [PATCH 2/2] gpio/tegra: Make it a DT interrupt controller   Stephen Warren
• Pin control mappings for DT   Stephen Warren
• [PATCH v3 4/5] ARM: vexpress: Initial RS1 memory map support   Dave Martin
• Pin control mappings for DT   Stephen Warren
• [PATCH v3 4/5] ARM: vexpress: Initial RS1 memory map support   Pawel Moll
• [PATCH v3 5/5] ARM: vexpress: DT-based support for CoreTiles Express A5x2 and A9x4   Pawel Moll
• [PATCH v3 3/5] ARM: vexpress: Add DT support in v2m   Pawel Moll
• Pin control mappings for DT   Tony Lindgren
• Pin control mappings for DT   Tony Lindgren
• [PATCH 2/2] gpio/tegra: Make it a DT interrupt controller   Rob Herring
• [RFC 6/8] of: add clock providers   Grant Likely
• [PATCH v3 4/5] ARM: vexpress: Initial RS1 memory map support   Nicolas Pitre
• [PATCH v3 4/5] ARM: vexpress: Initial RS1 memory map support   Mark Brown
• [PATCH v3 4/5] ARM: vexpress: Initial RS1 memory map support   Stephen Warren
• [PATCH v3 4/5] ARM: vexpress: Initial RS1 memory map support   Nicolas Pitre
• [PATCH v3 4/5] ARM: vexpress: Initial RS1 memory map support   Russell King - ARM Linux
• [PATCH 1/2] arm/tegra: Remove use of TEGRA_GPIO_TO_IRQ   Stephen Warren
• [PATCH 2/2] gpio/tegra: Dynamically allocate IRQ base, and support DT   Stephen Warren
• [PATCH] ASoC: Add device tree binding for WM8903   Stephen Warren
• [PATCH v3 4/5] ARM: vexpress: Initial RS1 memory map support   Nicolas Pitre
• [RFC 6/8] of: add clock providers   Shawn Guo
• [PATCH 0/4] Add device tree support for mc13892 regulator driver   Shawn Guo
• [PATCH v2 1/4] mfd: mc13xxx: add device tree probe support   Shawn Guo
• [PATCH v2 2/4] regulator: pass device_node to of_get_regulator_init_data()   Shawn Guo
• [PATCH v2 3/4] regulator: mc13892: add device tree probe support   Shawn Guo
• [PATCH v2 4/4] arm/imx: add mc13892 support into imx51-babbage.dts   Shawn Guo
• [PATCH net-next v6 3/4] can: cc770: add platform bus driver for the CC770 and AN82527   Wolfgang Grandegger
• [PATCH net-next v6 4/4] powerpc: tqm8548/tqm8xx: add and update CAN device nodes   Wolfgang Grandegger
• [PATCH v3 3/5] ARM: vexpress: Add DT support in v2m   Dave Martin
• Configurable interrupt sources, and DT bindings   Mark Brown
• [PATCH v3 4/5] ARM: vexpress: Initial RS1 memory map support   Mark Brown
• [PATCH v3 4/5] ARM: vexpress: Initial RS1 memory map support   Dave Martin
• [PATCH v3 5/5] ARM: vexpress: DT-based support for CoreTiles Express A5x2 and A9x4   Dave Martin
• Pin control mappings for DT   Linus Walleij
• [PATCH] ASoC: Add device tree binding for WM8903   Mark Brown
• [PATCH 2/2] gpio/tegra: Dynamically allocate IRQ base, and support DT   Rob Herring
• [PATCH 2/2] gpio/tegra: Dynamically allocate IRQ base, and support DT   Jamie Iles
• [PATCH] ASoC: Add device tree binding for WM8903   Dmitry Artamonow
• [PATCH v3 1/3] ARM: at91/aic: add irq domain and device tree support   Nicolas Ferre
• [PATCH v3 4/5] ARM: vexpress: Initial RS1 memory map support   Stephen Warren
• [PATCH] ASoC: Add device tree binding for WM8903   Stephen Warren
• [PATCH 2/2] gpio/tegra: Dynamically allocate IRQ base, and support DT   Stephen Warren
• [PATCH 2/2] gpio/tegra: Dynamically allocate IRQ base, and support DT   Jamie Iles
• [PATCH] ASoC: Add device tree binding for WM8903   Mark Brown
• [PATCH v3 4/5] ARM: vexpress: Initial RS1 memory map support   Russell King - ARM Linux
• [PATCH v3 1/6] ASoC: WM8903: Disallow all invalid gpio_cfg pdata values   Stephen Warren
• [PATCH v3 2/6] ASoC: WM8903: Create default platform data structure   Stephen Warren
• [PATCH v3 3/6] ASoC: WM8903: Pass pdata to wm8903_init_gpio   Stephen Warren
• [PATCH v3 4/6] ASoC: WM8903: Remove conditionals checking pdata != NULL   Stephen Warren
• [PATCH v3 5/6] ASoC: WM8903: Get default irq_active_low from IRQ controller   Stephen Warren
• [PATCH v3 6/6] ASoC: WM8903: Add device tree binding   Stephen Warren
• [PATCH 2/2] gpio/tegra: Dynamically allocate IRQ base, and support DT   Stephen Warren
• [PATCH 01/14] fdt: Tidy up a few fdtdec problems   Simon Glass
• Pin control mappings for DT   Stephen Warren
• Pin control mappings for DT   Tony Lindgren
• [PATCH 2/2] gpio/tegra: Dynamically allocate IRQ base, and support DT   Nicolas Ferre
• Pin control mappings for DT   Tony Lindgren
• [PATCH v3 3/6] ASoC: WM8903: Pass pdata to wm8903_init_gpio   Mark Brown
• [PATCH v3 2/6] ASoC: WM8903: Create default platform data structure   Mark Brown
• [PATCH v3 3/6] ASoC: WM8903: Pass pdata to wm8903_init_gpio   Stephen Warren
• [PATCH 02/14] fdt: Add functions to access phandles, arrays and bools   Simon Glass
• [PATCH v3 3/6] ASoC: WM8903: Pass pdata to wm8903_init_gpio   Mark Brown
• [PATCH 05/14] tegra: fdt: Add Tegra2x device tree file   Simon Glass
• [U-Boot] [PATCH 02/14] fdt: Add functions to access phandles, arrays and bools   Jerry Van Baren
• [U-Boot] [PATCH 02/14] fdt: Add functions to access phandles, arrays and bools   Simon Glass
• Configurable interrupt sources, and DT bindings   David Gibson
• [PATCH 1/5] ASoC: omap-dmic: Add device tree bindings   Peter Ujfalusi
• [PATCH 4/5] OMAP4: devices: Do not create mcpdm device if the dtb has been provided   Peter Ujfalusi
• [PATCH 2/5] ASoC: omap-mcpdm: Add device tree bindings   Peter Ujfalusi
• [PATCH 3/5] OMAP4: devices: Do not create dmic device if the dtb has been provided   Peter Ujfalusi
• [PATCH 5/5] ARM: OMAP4: DTS: Support for dmic, and McPDM in device tree   Peter Ujfalusi
• [PATCH 0/5] ASoC: OMAP4: Device tree support for DMIC, McPDM   Peter Ujfalusi
• alias variable support   Kushwaha Prabhakar-B32579
• Pin control mappings for DT   Linus Walleij
• [PATCH v3 1/6] ASoC: WM8903: Disallow all invalid gpio_cfg pdata values   Mark Brown
• Configurable interrupt sources, and DT bindings   Mark Brown
• Configurable interrupt sources, and DT bindings   David Gibson
• [PATCH 1/5] ASoC: omap-dmic: Add device tree bindings   Mark Brown
• [PATCH 1/5] ASoC: omap-dmic: Add device tree bindings   Cousson, Benoit
• [PATCH 1/5] ASoC: omap-dmic: Add device tree bindings   Peter Ujfalusi
• [PATCH] irqdomain: protect macro variable in domain iterators   Dave Martin
• [PATCH 1/5] ASoC: omap-dmic: Add device tree bindings   Mark Brown
• [PATCH] irqdomain: protect macro variable in domain iterators   Nicolas Ferre
• [PATCH v2] irqdomain: protect macro variable in domain iterators   Nicolas Ferre
• [PATCH 1/5] ASoC: omap-dmic: Add device tree bindings   Cousson, Benoit
• Configurable interrupt sources, and DT bindings   Mark Brown
• [PATCH v2] irqdomain: protect macro variable in domain iterators   Dave Martin
• [PATCH] irqdomain: protect macro variable in domain iterators   Rob Herring
• [PATCH] irqdomain: protect macro variable in domain iterators   Nicolas Ferre
• [PATCH 1/5] ASoC: omap-dmic: Add device tree bindings   Mark Brown
• [PATCH] irqdomain: protect macro variable in domain iterators   Dave Martin
• Configurable interrupt sources, and DT bindings   David Gibson
• Configurable interrupt sources, and DT bindings   Mark Brown
• [PATCH 1/5] ASoC: omap-dmic: Add device tree bindings   Cousson, Benoit
• [PATCH 1/5] ASoC: omap-dmic: Add device tree bindings   Mark Brown
• [PATCH 1/1] net/macb: add DT support   Nicolas Ferre
• [PATCH v2 1/4] mfd: mc13xxx: add device tree probe support   Mark Brown
• [PATCH 1/1] net/macb: add DT support   Jamie Iles
• [PATCH 02/14] fdt: Add functions to access phandles, arrays and bools   Stephen Warren
• [PATCH 05/14] tegra: fdt: Add Tegra2x device tree file   Stephen Warren
• Pin control mappings for DT   Tony Lindgren
• [PATCH 02/14] fdt: Add functions to access phandles, arrays and bools   Simon Glass
• [PATCH 05/14] tegra: fdt: Add Tegra2x device tree file   Simon Glass
• [PATCH v2] isp1760: Fix endianness-sensitivity in of_isp1760_probe()   Dave Martin
• [PATCH] net/macb: add DT support   Nicolas Ferre
• [U-Boot] [PATCH 02/14] fdt: Add functions to access phandles, arrays and bools   Jerry Van Baren
• [PATCH] net/macb: add DT support   Jamie Iles
• [PATCH v3 4/5] ARM: vexpress: Initial RS1 memory map support   Stephen Warren
• [PATCH v2] net/macb: add DT support   Nicolas Ferre
• [PATCH] ARM: at91/net: add macb ethernet controller in 9g45 DT   Nicolas Ferre
• [PATCH] net/macb: add DT support   Nicolas Ferre
• [PATCH v2] net/macb: add DT support   David Miller
• [U-Boot] [PATCH 02/14] fdt: Add functions to access phandles, arrays and bools   Simon Glass
• [PATCH v3 4/5] ARM: vexpress: Initial RS1 memory map support   Marek Vasut
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Dave Martin
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Dave Martin
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Linus Torvalds
• [PATCH v3 4/5] ARM: vexpress: Initial RS1 memory map support   Dave Martin
• [RFC PATCH 0/3] New "gpio-poweroff" driver to turn off platform devices with GPIOs   Kyle Moffett
• [RFC PATCH 1/3] of_gpio: Extend of_gpio_count() to support other property names   Kyle Moffett
• [RFC PATCH 2/3] of_gpio: Add new helpers for easily requesting lots of GPIOs   Kyle Moffett
• [RFC PATCH 3/3] New "gpio-poweroff" driver to turn off platform devices with GPIOs   Kyle Moffett
• [PATCH v2 0/5] ASoC: WM8903: DT bindings & related   Stephen Warren
• [PATCH v2 1/5] ASoC: WM8903: Fix platform data gpio_cfg confusion   Stephen Warren
• [PATCH v2 2/5] ASoC: WM8903: Create default platform data structure   Stephen Warren
• [PATCH v2 3/5] ASoC: WM8903: Remove conditionals checking pdata != NULL   Stephen Warren
• [PATCH v2 4/5] ASoC: WM8903: Get default irq_active_low from IRQ controller   Stephen Warren
• [PATCH v2 5/5] ASoC: WM8903: Add device tree binding   Stephen Warren
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Anton Vorontsov
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Anton Vorontsov
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Linus Torvalds
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Anton Vorontsov
• [PATCH v3 4/5] ARM: vexpress: Initial RS1 memory map support   Nicolas Pitre
• [PATCH v3 4/5] ARM: vexpress: Initial RS1 memory map support   Marek Vasut
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Benjamin Herrenschmidt
• [PATCH v2] of/irq: Get rid of NO_IRQ usage   Anton Vorontsov
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Alan Cox
• [PATCH v2 01/17] fdt: Tidy up a few fdtdec problems   Simon Glass
• [PATCH v2 02/17] fdt: Add functions to access phandles, arrays and bools   Simon Glass
• [PATCH v2 04/17] fdt: Add basic support for decoding GPIO definitions   Simon Glass
• [PATCH v2 05/17] arm: fdt: Ensure that an embedded fdt is word-aligned   Simon Glass
• [PATCH v2 06/17] arm: fdt: Add skeleton device tree file from kernel   Simon Glass
• [PATCH v2 07/17] tegra: fdt: Add Tegra2x device tree file from kernel   Simon Glass
• [PATCH v2 08/17] tegra: fdt: Add device tree file for Tegra2 Seaboard from kernel   Simon Glass
• [PATCH v2 09/17] tegra: usb: fdt: Add additional device tree definitions for USB ports   Simon Glass
• [PATCH v2 10/17] tegra: usb: fdt: Add USB definitions for Tegra2 Seaboard   Simon Glass
• [PATCH v2 17/17] tegra: fdt: Enable FDT support for Seaboard   Simon Glass
• [PATCH 1/6] tegra: fdt: Add keyboard controller definition   Simon Glass
• [PATCH 2/6] tegra: fdt: Add keyboard definitions for Seaboard   Simon Glass
• [PATCH 3/6] fdt: Add fdtdec functions to read byte array   Simon Glass
• [PATCH] ARM: at91/net: add macb ethernet controller in 9g45 DT   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ll_temac: Use kcalloc instead of kzalloc to allocate array   Thomas Meyer
• [PATCH v2 4/5] ASoC: WM8903: Get default irq_active_low from IRQ controller   Mark Brown
• [PATCH v2 2/5] ASoC: WM8903: Create default platform data structure   Mark Brown
• [PATCH 1/5] ASoC: omap-dmic: Add device tree bindings   Mark Brown
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Geert Uytterhoeven
• [PATCH] arm,davinci: configure davinci aemif chipselects through OF   Heiko Schocher
• [PATCH] drivers, char: add U-Boot bootcount driver   Heiko Schocher
• [PATCH v5 3/4] regulator: pass additional of_node to regulator_register()   Thomas Abraham
• [PATCH] RFC, watchdog: add generic wdt driver API   Heiko Schocher
• [PATCH] drivers, char: add U-Boot bootcount driver   Matthias Kaehlcke
• [PATCH] drivers, char: add U-Boot bootcount driver   Wolfram Sang
• [PATCH] arm, davinci: configure davinci aemif chipselects through OF   Sergei Shtylyov
• [PATCH] arm, davinci: configure davinci aemif chipselects through OF   Sergei Shtylyov
• [PATCH] RFC, watchdog: add generic wdt driver API   Wolfram Sang
• [PATCH v5 1/4] regulator: helper routine to extract regulator_init_data   Thomas Abraham
• [PATCH v5 1/4] regulator: helper routine to extract regulator_init_data   Mark Brown
• [PATCH] drivers, char: add U-Boot bootcount driver   Wolfgang Denk
• [PATCH] drivers, char: add U-Boot bootcount driver   Paul Bolle
• [PATCH] RFC, watchdog: add generic wdt driver API   Wolfgang Denk
• alias variable support   David Gibson
• [PATCH] drivers, char: add U-Boot bootcount driver   Ryan Mallon
• libfdt: Add support for appending the values to a existing property   David Gibson
• [PATCH v2 1/4] mfd: mc13xxx: add device tree probe support   Shawn Guo
• [PATCH 2/2] gpio/tegra: Dynamically allocate IRQ base, and support DT   Shawn Guo
• [PATCH v5 3/4] regulator: pass additional of_node to regulator_register()   Rajendra Nayak
• [PATCH] drivers, char: add U-Boot bootcount driver   Thierry Reding
• [PATCH v5 1/4] regulator: helper routine to extract regulator_init_data   Thomas Abraham
• [PATCH v5 1/4] regulator: helper routine to extract regulator_init_data   Mark Brown
• [PATCH v5 1/4] regulator: helper routine to extract regulator_init_data   Thomas Abraham
• [PATCH] arm, davinci: configure davinci aemif chipselects through OF   Heiko Schocher
• [PATCH v5 1/4] regulator: helper routine to extract regulator_init_data   Mark Brown
• [PATCH v5 1/4] regulator: helper routine to extract regulator_init_data   Thomas Abraham
• [PATCH v2] net/macb: add DT support   Nicolas Ferre
• [PATCH] ARM: at91/net: add macb ethernet controller in 9g45 DT   Nicolas Ferre
• [PATCH] net/macb: add DT support   Jamie Iles
• [PATCH] arm, davinci: configure davinci aemif chipselects through OF   Heiko Schocher
• [PATCH] net/macb: add DT support   Nicolas Ferre
• [PATCH v3 1/2] net/macb: add DT support for Cadence macb/gem driver   Nicolas Ferre
• [PATCH v3 2/2] ARM: at91/net: add macb ethernet controller in 9g45 DT   Nicolas Ferre
• [PATCH] RFC, watchdog: add generic wdt driver API   Alan Cox
• [PATCH 2/2] gpio/tegra: Dynamically allocate IRQ base, and support DT   Rob Herring
• [PATCH 1/5] ASoC: omap-dmic: Add device tree bindings   Peter Ujfalusi
• [PATCH 0/3] of: Add support for named irq and reg   Benoit Cousson
• [PATCH 1/3] of/base: Take NULL string into account for property with multiple strings   Benoit Cousson
• [PATCH 2/3] of/address: Add reg-names property to name an iomem resource   Benoit Cousson
• [PATCH 3/3] of/irq: Add interrupts-names property to name an irq resource   Benoit Cousson
• [PATCH] drivers, char: add U-Boot bootcount driver   Heiko Schocher
• [PATCH 2/2] gpio/tegra: Dynamically allocate IRQ base, and support DT   Shawn Guo
• [PATCH v3 2/2] ARM: at91/net: add macb ethernet controller in 9g45 DT   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5] ASoC: omap-dmic: Add device tree bindings   Mark Brown
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Dave Martin
• libfdt: Add support for appending the values to a existing property   Jon Loeliger
• [PATCH v3 3/5] ARM: vexpress: Add DT support in v2m   Dave Martin
• [PATCH v3 3/5] ARM: vexpress: Add DT support in v2m   Pawel Moll
• [PATCH v2 4/5] ASoC: WM8903: Get default irq_active_low from IRQ controller   Stephen Warren
• [PATCH 2/2] gpio/tegra: Dynamically allocate IRQ base, and support DT   Stephen Warren
• [PATCH v3 5/5] ARM: vexpress: DT-based support for CoreTiles Express A5x2 and A9x4   Pawel Moll
• [PATCH v3 5/5] ARM: vexpress: DT-based support for CoreTiles Express A5x2 and A9x4   Dave Martin
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Nicolas Pitre
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Alan Cox
• [PATCH v3 5/5] ARM: vexpress: DT-based support for CoreTiles Express A5x2 and A9x4   Pawel Moll
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Dave Martin
• [PATCH v3 5/5] ARM: vexpress: DT-based support for CoreTiles Express A5x2 and A9x4   Dave Martin
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Geert Uytterhoeven
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Nicolas Pitre
• [PATCH v2 2/4] regulator: pass device_node to of_get_regulator_init_data()   Thomas Abraham
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Alan Cox
• [PATCH v2 1/4] mfd: mc13xxx: add device tree probe support   Mark Brown
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Rob Herring
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Dave Martin
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   James Bottomley
• [PATCH v2 2/4] regulator: pass device_node to of_get_regulator_init_data()   Mark Brown
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Nicolas Pitre
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Anton Vorontsov
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Rob Herring
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Alan Cox
• [PATCH v2 01/17] fdt: Tidy up a few fdtdec problems   Stephen Warren
• [PATCH v2 01/17] fdt: Tidy up a few fdtdec problems   Simon Glass
• [PATCH v2 04/17] fdt: Add basic support for decoding GPIO definitions   Stephen Warren
• [PATCH v2 04/17] fdt: Add basic support for decoding GPIO definitions   Simon Glass
• [PATCH v2 02/17] fdt: Add functions to access phandles, arrays and bools   Stephen Warren
• [PATCH v2 01/17] fdt: Tidy up a few fdtdec problems   Stephen Warren
• [PATCH v2 02/17] fdt: Add functions to access phandles, arrays and bools   Simon Glass
• [PATCH v2 01/17] fdt: Tidy up a few fdtdec problems   Simon Glass
• [PATCH v2 01/17] fdt: Tidy up a few fdtdec problems   Scott Wood
• [PATCH v2 04/17] fdt: Add basic support for decoding GPIO definitions   Stephen Warren
• [PATCH v2 01/17] fdt: Tidy up a few fdtdec problems   Stephen Warren
• [PATCH v2 02/17] fdt: Add functions to access phandles, arrays and bools   Stephen Warren
• [PATCH v2 04/17] fdt: Add basic support for decoding GPIO definitions   Simon Glass
• [PATCH v2 01/17] fdt: Tidy up a few fdtdec problems   Simon Glass
• [PATCH v2 04/17] fdt: Add basic support for decoding GPIO definitions   Stephen Warren
• [PATCH v2 09/17] tegra: usb: fdt: Add additional device tree definitions for USB ports   Stephen Warren
• [PATCH v2 10/17] tegra: usb: fdt: Add USB definitions for Tegra2 Seaboard   Stephen Warren
• [PATCH v2 04/17] fdt: Add basic support for decoding GPIO definitions   Simon Glass
• [PATCH 2/6] tegra: fdt: Add keyboard definitions for Seaboard   Stephen Warren
• [PATCH 3/6] fdt: Add fdtdec functions to read byte array   Stephen Warren
• [PATCH v2 02/17] fdt: Add functions to access phandles, arrays and bools   Simon Glass
• [PATCH 2/2] Added parameter for selection power supply name from pdata   Rhyland Klein
• [PATCH 2/2] Added parameter for selection power supply name from pdata   Rhyland Klein
• [PATCH 2/5] power: sbs-battery: rename internals to new name   Rhyland Klein
• [PATCH 3/5] Adding entry for Smart Battery Systems   Rhyland Klein
• [PATCH 4/5] Rename propgated to dt binding documentation   Rhyland Klein
• [PATCH 5/5] power: sbs-battery: Change power supply name   Rhyland Klein
• [PATCH 1/2] power: sbs-battery: Rename bq20z75 to sbs-battery   Rhyland Klein
• [PATCH 1/5] drivers: power: Rename bq20z75 to sbs-battery   Rhyland Klein
• libfdt: Add support for appending the values to a existing property   David Gibson
• [PATCH 3/6] fdt: Add fdtdec functions to read byte array   Simon Glass
• Boolean properties   Simon Glass
• [PATCH v2 09/17] tegra: usb: fdt: Add additional device tree definitions for USB ports   Simon Glass
• [PATCH 2/5] power: sbs-battery: rename internals to new name   Rhyland Klein
• [PATCH 2/5] power: sbs-battery: rename internals to new name   Anton Vorontsov
• [PATCH 5/5] power: sbs-battery: Change power supply name   Anton Vorontsov
• [PATCH 2/5 v2] power: sbs-battery: rename internals to new name   Rhyland Klein
• [PATCH 3/5 v2] Adding entry for Smart Battery Systems   Rhyland Klein
• [PATCH 4/5 v2] Rename propgated to dt binding documentation   Rhyland Klein
• [PATCH 5/5 v2] power: sbs-battery: Change power supply name   Rhyland Klein
• [PATCH 1/5 v2] drivers: power: Rename bq20z75 to sbs-battery   Rhyland Klein
• [PATCH v2 1/4] mfd: mc13xxx: add device tree probe support   Shawn Guo
• [U-Boot] [PATCH v2 04/17] fdt: Add basic support for decoding GPIO definitions   Mike Frysinger
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3 1/3] ARM: at91/aic: add irq domain and device tree support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v5 1/4] regulator: helper routine to extract regulator_init_data   Rajendra Nayak
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Dave Martin
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Dave Martin
• [PATCH v2 1/4] mfd: mc13xxx: add device tree probe support   Mark Brown
• [PATCH v2 1/5] ASoC: WM8903: Fix platform data gpio_cfg confusion   Mark Brown
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Alan Cox
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Russell King - ARM Linux
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Russell King - ARM Linux
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Geert Uytterhoeven
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Russell King - ARM Linux
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Alan Cox
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Alan Cox
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Russell King - ARM Linux
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Alan Cox
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Dave Martin
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Russell King - ARM Linux
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Alan Cox
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Dave Martin
• [PATCH v3] mfd: mc13xxx: add device tree probe support   Shawn Guo
• PWM and backlight devices   Thierry Reding
• [PATCH v4 0/6] Versatile Express DT support   Pawel Moll
• [PATCH v4 1/6] ARM: versatile: Add missing ENDPROC to headsmp.S   Pawel Moll
• [PATCH v4 2/6] ARM: vexpress: Get rid of MMIO_P2V   Pawel Moll
• [PATCH v4 3/6] ARM: vexpress: Add DT support for the motherboard   Pawel Moll
• [PATCH v4 4/6] ARM: vexpress: Motherboard RS1 memory map support   Pawel Moll
• [PATCH v4 5/6] ARM: vexpress: DT-based support for Cortex-A5 and Cortex-A9 based tiles   Pawel Moll
• [PATCH v4 6/6] ARM: vexpress: DT-based support for Cortex-A7 and Cortex-A15 based tiles   Pawel Moll
• OMAP2+: Devicetree cleanup   Benoit Cousson
• [PATCH 1/3] ARM: OMAP2+: kconfig: Enable devicetree by default for OMAP2+ systems   Benoit Cousson
• [PATCH 2/3] arm/dts: OMAP: Remove bootargs node from board files   Benoit Cousson
• [PATCH 3/3] ARM: OMAP2+: board-generic: Replace #if defined by #ifdef for consistency   Benoit Cousson
• [PATCH 2/3] arm/dts: OMAP: Remove bootargs node from board files   Rob Herring
• [PATCH 1/5] drivers: power: Rename bq20z75 to sbs-battery   Matthew Garrett
• PWM and backlight devices   Rob Herring
• [PATCH v2 5/5] ASoC: WM8903: Add device tree binding   Stephen Warren
• [PATCH v2 5/5] ASoC: WM8903: Add device tree binding   Rob Herring
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Nicolas Pitre
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Linus Torvalds
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Rob Herring
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Russell King - ARM Linux
• [PATCH v2 5/5] ASoC: WM8903: Add device tree binding   Stephen Warren
• [PATCH v2 5/5] ASoC: WM8903: Add device tree binding   Rob Herring
• [PATCH v2 09/17] tegra: usb: fdt: Add additional device tree definitions for USB ports   Stephen Warren
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Uwe Kleine-König
• [PATCH v2 09/17] tegra: usb: fdt: Add additional device tree definitions for USB ports   Simon Glass
• [PATCH 1/2] of/irq: Get rid of NO_IRQ usage   Rob Herring
• [PATCH 1/2] of/irq: Get rid of NO_IRQ usage   Linus Torvalds
• [PATCH] drivers, char: add U-Boot bootcount driver   Wolfram Sang
• [PATCH v2 1/6] tegra: fdt: Add keyboard controller definition   Simon Glass
• [PATCH v2 2/6] tegra: fdt: Add keyboard definitions for Seaboard   Simon Glass
• [PATCH v2 3/6] fdt: Add fdtdec functions to read byte array   Simon Glass
• [PATCH] drivers, char: add U-Boot bootcount driver   Wolfgang Denk
• [PATCH] RFC, watchdog: add generic wdt driver API   Wolfram Sang
• [PATCH] drivers, char: add U-Boot bootcount driver   Wolfram Sang
• [PATCH v4 2/6] ARM: vexpress: Get rid of MMIO_P2V   Arnd Bergmann
• [PATCH v4 3/6] ARM: vexpress: Add DT support for the motherboard   Arnd Bergmann
• [PATCH v4 4/6] ARM: vexpress: Motherboard RS1 memory map support   Arnd Bergmann
• [PATCH v4 1/6] ARM: versatile: Add missing ENDPROC to headsmp.S   Arnd Bergmann
• [PATCH v4 5/6] ARM: vexpress: DT-based support for Cortex-A5 and Cortex-A9 based tiles   Arnd Bergmann
• Boolean properties   David Gibson
• [PATCH v4 5/6] ARM: vexpress: DT-based support for Cortex-A5 and Cortex-A9 based tiles   Arnd Bergmann
• [PATCH v3] of/irq: Get rid of NO_IRQ usage   Anton Vorontsov
• [PATCH] drivers, char: add U-Boot bootcount driver   Rob Herring
• Boolean properties   Simon Glass
• [U-Boot] [PATCH v2 04/17] fdt: Add basic support for decoding GPIO definitions   Simon Glass
• [PATCH v3 01/16] fdt: Tidy up a few fdtdec problems   Simon Glass
• [PATCH v3 02/16] fdt: Add functions to access phandles, arrays and bools   Simon Glass
• [PATCH v3 04/16] fdt: Add basic support for decoding GPIO definitions   Simon Glass
• [PATCH v3 05/16] arm: fdt: Ensure that an embedded fdt is word-aligned   Simon Glass
• [PATCH v3 06/16] arm: fdt: Add skeleton device tree file from kernel   Simon Glass
• [PATCH v3 07/16] tegra: fdt: Add Tegra2x device tree file from kernel   Simon Glass
• [PATCH v3 08/16] tegra: fdt: Add device tree file for Tegra2 Seaboard from kernel   Simon Glass
• [PATCH v3 09/16] tegra: usb: fdt: Add additional device tree definitions for USB ports   Simon Glass
• [PATCH v3 10/16] tegra: usb: fdt: Add USB definitions for Tegra2 Seaboard   Simon Glass
• [PATCH v3 16/16] tegra: fdt: Enable FDT support for Seaboard   Simon Glass
• [PATCH 1/3 v4] usb: tegra20-ehci: Add devicetree support.   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3] of/irq: Get rid of NO_IRQ usage   Rob Herring
• [PATCH] RFC, watchdog: add generic wdt driver API   Heiko Schocher
• [PATCH net-next v6 4/4] powerpc: tqm8548/tqm8xx: add and update CAN device nodes   Benjamin Herrenschmidt
• [PATCH net-next v6 4/4] powerpc: tqm8548/tqm8xx: add and update CAN device nodes   David Miller
• [PATCH net-next v6 4/4] powerpc: tqm8548/tqm8xx: add and update CAN device nodes   Benjamin Herrenschmidt
• Boolean properties   Mitch Bradley
• [PATCH net-next v6 4/4] powerpc: tqm8548/tqm8xx: add and update CAN device nodes   Wolfgang Grandegger
• [PATCH 1/5] ASoC: omap-dmic: Add device tree bindings   Peter Ujfalusi
• [PATCH v3] of/irq: Get rid of NO_IRQ usage   Wolfram Sang
• [PATCH] arm,davinci: configure davinci aemif chipselects through OF   Nori, Sekhar
• [PATCH v2 5/5] ASoC: WM8903: Add device tree binding   Mark Brown
• [PATCH v3 1/2] net/macb: add DT support for Cadence macb/gem driver   Nicolas Ferre
• [RFC PATCH] microblaze/irq: Change NO_IRQ to 0   Grant Likely
• [PATCH v4 5/6] ARM: vexpress: DT-based support for Cortex-A5 and Cortex-A9 based tiles   Dave Martin
• [PATCH] ARM: highbank: add xgmac ethernet devices to dts   Rob Herring
• [PATCH v4 5/6] ARM: vexpress: DT-based support for Cortex-A5 and Cortex-A9 based tiles   Dave Martin
• [RFC PATCH] microblaze/irq: Change NO_IRQ to 0   Linus Torvalds
• [RFC PATCH] microblaze/irq: Change NO_IRQ to 0   Rob Herring
• [PATCH 1/3 v4] usb: tegra20-ehci: Add devicetree support.   Stephen Warren
• [PATCH] RFC, watchdog: add generic wdt driver API   Alan Cox
• [PATCH v3 1/2] net/macb: add DT support for Cadence macb/gem driver   David Miller
• [PATCH v4 5/6] ARM: vexpress: DT-based support for Cortex-A5 and Cortex-A9 based tiles   Pawel Moll
• [PATCH v4 5/6] ARM: vexpress: DT-based support for Cortex-A5 and Cortex-A9 based tiles   Pawel Moll
• [PATCH v4 5/6] ARM: vexpress: DT-based support for Cortex-A5 and Cortex-A9 based tiles   Pawel Moll
• [PATCH 0/4] ARM: OMAP2+: Interrupt controllers adaptation to DT   Benoit Cousson
• [PATCH 1/4] arm/dts: OMAP4: Update DTS file with new GIC bindings   Benoit Cousson
• [PATCH 2/4] ARM: OMAP2/3: intc: Add DT support for TI interrupt controller   Benoit Cousson
• [PATCH 3/4] arm/dts: OMAP3: Add interrupt-controller bindings for INTC   Benoit Cousson
• [PATCH 4/4] ARM: OMAP2+: board-generic: Use of_irq_init API   Benoit Cousson
• [PATCH v2 1/6] ASoC: Allow device tree to specify a card's name   Stephen Warren
• [PATCH v2 2/6] ASoC: Allow the DAPM routes to be stored in device tree   Stephen Warren
• [PATCH v2 3/6] ASoC: Refactor some conditions and loop in soc_bind_dai_link()   Stephen Warren
• [PATCH v2 4/6] ASoC: Allow DAI links to be specified using device tree nodes   Stephen Warren
• [PATCH v2 5/6] ASoC: Tegra: Move DAS configuration into DAS driver   Stephen Warren
• [PATCH v2 6/6] ASoC: Tegra+WM8903 machine: Add device tree binding   Stephen Warren
• [PATCH 2/4] ARM: OMAP2/3: intc: Add DT support for TI interrupt controller   Rob Herring
• [PATCH net-next v6 4/4] powerpc: tqm8548/tqm8xx: add and update CAN device nodes   Benjamin Herrenschmidt
• [PATCH 4/6] tegra: Add tegra keyboard support   Stephen Warren
• [PATCH v2 0/8] arm/tegra: Device tree support for audio   Stephen Warren
• [PATCH v2 1/8] arm/tegra: board-dt: Fix AUXDATA typo   Stephen Warren
• [PATCH v2 1/6] ASoC: Allow device tree to specify a card's name   Stephen Warren
• [PATCH v2 2/8] arm/tegra: board-dt: Enable audio-related clocks   Stephen Warren
• [PATCH v2 2/6] ASoC: Allow the DAPM routes to be stored in device tree   Stephen Warren
• [PATCH v2 3/8] arm/tegra: Split Seaboard GPIO table to allow for Ventana   Stephen Warren
• [PATCH v2 3/6] ASoC: Refactor some conditions and loop in soc_bind_dai_link()   Stephen Warren
• [PATCH v2 4/8] arm/dt: tegra: Add Tegra APB DMA device tree binding   Stephen Warren
• [PATCH v2 4/6] ASoC: Allow DAI links to be specified using device tree nodes   Stephen Warren
• [PATCH v2 5/8] arm/dt: tegra: Clean up I2S and DAS nodes   Stephen Warren
• [PATCH v2 5/6] ASoC: Tegra: Move DAS configuration into DAS driver   Stephen Warren
• [PATCH v2 6/8] arm/dt: tegra: Modify I2S nodes to match binding   Stephen Warren
• [PATCH v2 6/6] ASoC: Tegra+WM8903 machine: Add device tree binding   Stephen Warren
• [PATCH v2 7/8] arm/dt: tegra: Add labels for I2S controllers   Stephen Warren
• [PATCH v2 8/8] arm/dt: tegra: Enable audio on WM8903 boards, disable others   Stephen Warren
• [PATCH v4 3/6] ARM: vexpress: Add DT support for the motherboard   Arnd Bergmann
• [PATCH v4 5/6] ARM: vexpress: DT-based support for Cortex-A5 and Cortex-A9 based tiles   Arnd Bergmann
• [PATCH v2 09/17] tegra: usb: fdt: Add additional device tree definitions for USB ports   Stephen Warren
• [PATCH 10/14] tegra: usb: Add support for USB peripheral   Stephen Warren
• [PATCH v2 1/5] ASoC: WM8903: Fix platform data gpio_cfg confusion   Olof Johansson
• [PATCH v2 1/8] arm/tegra: board-dt: Fix AUXDATA typo   Olof Johansson
• [PATCH v2 1/6] ASoC: Allow device tree to specify a card's name   Olof Johansson
• [PATCH v2 2/8] arm/tegra: board-dt: Enable audio-related clocks   Olof Johansson
• [PATCH v2 3/8] arm/tegra: Split Seaboard GPIO table to allow for Ventana   Olof Johansson
• [PATCH v2 4/8] arm/dt: tegra: Add Tegra APB DMA device tree binding   Olof Johansson
• [PATCH v2 5/8] arm/dt: tegra: Clean up I2S and DAS nodes   Olof Johansson
• [PATCH v2 1/6] ASoC: Allow device tree to specify a card's name   Rob Herring
• [PATCH v2 3/8] arm/tegra: Split Seaboard GPIO table to allow for Ventana   Stephen Warren
• [PATCH 1/5] arm/dt: tegra: Remove /memreserve/ from device-tree files   Olof Johansson
• [PATCH 2/5] arm/dt: tegra: Remove /chosen node   Olof Johansson
• [PATCH 3/5] arm/dt: tegra: Fix I2C nodes to match board files   Olof Johansson
• [PATCH 4/5] arm/dt: tegra: Fix serial nodes to match board files   Olof Johansson
• [PATCH 5/5] arm/dt: tegra: Fix SDHCI nodes to match board files   Olof Johansson
• [PATCH 1/5] arm/dt: tegra: Remove /memreserve/ from device-tree files   Olof Johansson
• [PATCH v2 1/6] ASoC: Allow device tree to specify a card's name   Stephen Warren
• [PATCH v2 4/8] arm/dt: tegra: Add Tegra APB DMA device tree binding   Olof Johansson
• [PATCH v2 1/5] ASoC: WM8903: Fix platform data gpio_cfg confusion   Mark Brown
• [PATCH v2 1/6] ASoC: Allow device tree to specify a card's name   Mark Brown
• [PATCH v2 2/6] ASoC: Allow the DAPM routes to be stored in device tree   Mark Brown
• [PATCH v2 5/6] ASoC: Tegra: Move DAS configuration into DAS driver   Mark Brown
• [PATCH V3] arm/tegra: convert tegra20 to GIC devicetree binding   Olof Johansson
• [PATCH] arm, davinci: configure davinci aemif chipselects through OF   Heiko Schocher
• [PATCH] arm,davinci: configure davinci aemif chipselects through OF   Nori, Sekhar
• [PATCH] arm, davinci: configure davinci aemif chipselects through OF   Heiko Schocher
• [PATCH v2] irqdomain: protect macro variable in domain iterators   Nicolas Ferre
• [PATCH] arm,davinci: configure davinci aemif chipselects through OF   Nori, Sekhar
• [PATCH v4 3/6] ARM: vexpress: Add DT support for the motherboard   Pawel Moll
• [PATCH v4 5/6] ARM: vexpress: DT-based support for Cortex-A5 and Cortex-A9 based tiles   Dave Martin
• [PATCH v6 00/10] Add support for tegra30 and cardhu   Peter De Schrijver
• [PATCH v6 00/10] Add support for tegra30 and cardhu   Peter De Schrijver
• [PATCH v6 01/10] arm/tegra: initial device tree for tegra30   Peter De Schrijver
• [PATCH v6 02/10] arm/tegra: cleanup tegra20 support   Peter De Schrijver
• [PATCH v6 03/10] arm/tegra: prepare clock code for multiple tegra variants   Peter De Schrijver
• [PATCH v6 04/10] arm/tegra: prepare early init for multiple tegra variants   Peter De Schrijver
• [PATCH v6 05/10] arm/tegra: rename tegra20 pinmux files   Peter De Schrijver
• [PATCH v6 06/10] arm/tegra: prepare pinmux code for multiple tegra variants   Peter De Schrijver
• [PATCH v6 07/10] arm/tegra: add new fields to struct tegra_pingroup_desc   Peter De Schrijver
• [PATCH v6 08/10] arm/tegra: pinmux tables and definitions for tegra30   Peter De Schrijver
• [PATCH v6 09/10] arm/tegra: implement support for tegra30   Peter De Schrijver
• [PATCH v6 10/10] arm/tegra: add support for tegra30 based board cardhu   Peter De Schrijver
• [PATCH v2] irqdomain: protect macro variable in domain iterators   Rob Herring
• [PATCH 2/2] gpio/tegra: Dynamically allocate IRQ base, and support DT   Shawn Guo
• [PATCH 2/4] ARM: OMAP2/3: intc: Add DT support for TI interrupt controller   Cousson, Benoit
• [PATCH v4 3/6] ARM: vexpress: Add DT support for the motherboard   Arnd Bergmann
• [PATCH] arm, davinci: configure davinci aemif chipselects through OF   Arnd Bergmann
• TI OMAP device tree and DSPs?   Kumar Gala
• TI OMAP device tree and DSPs?   Cousson, Benoit
• [PATCH v6 04/10] arm/tegra: prepare early init for multiple tegra variants   Stephen Warren
• [PATCH v6 10/10] arm/tegra: add support for tegra30 based board cardhu   Stephen Warren
• [PATCH v6 00/10] Add support for tegra30 and cardhu   Stephen Warren
• [PATCH v6 03/10] arm/tegra: prepare clock code for multiple tegra variants   Colin Cross
• [PATCH v6 04/10] arm/tegra: prepare early init for multiple tegra variants   Colin Cross
• [PATCH v2 1/6] ASoC: Allow device tree to specify a card's name   Liam Girdwood
• TI OMAP device tree and DSPs?   Kumar Gala
• TI OMAP device tree and DSPs?   Cousson, Benoit
• [PATCH v2 09/17] tegra: usb: fdt: Add additional device tree definitions for USB ports   Simon Glass
• [PATCH 10/14] tegra: usb: Add support for USB peripheral   Simon Glass
• [PATCH 4/6] tegra: Add tegra keyboard support   Simon Glass
• [PATCH 2/3] arm/dts: OMAP: Remove bootargs node from board files   Tony Lindgren
• Boolean properties   David Gibson
• Boolean properties   Simon Glass
• Boolean properties   Simon Glass
• Boolean properties   Mitch Bradley
• [PATCH v2 1/6] ASoC: Allow device tree to specify a card's name   Mark Brown
• [PATCH v2 3/6] ASoC: Refactor some conditions and loop in soc_bind_dai_link()   Mark Brown
• [PATCH v2 4/6] ASoC: Allow DAI links to be specified using device tree nodes   Mark Brown
• [PATCH v6 03/10] arm/tegra: prepare clock code for multiple tegra variants   Peter De Schrijver
• [PATCH 2/4] rtc-s3c: make room for more variants in devicetree block   Heiko Stübner
• [PATCH v6 04/10] arm/tegra: prepare early init for multiple tegra variants   Peter De Schrijver
• [PATCH 1/5] microblaze: Use of_find_compatible_node for timer and   Michal Simek
• [PATCH 2/5] microblaze: intc: Change variable name   Michal Simek
• [PATCH 3/5] microblaze: Use irq_of_parse_and_map for timer   Michal Simek
• [PATCH 4/5] microblaze: Change NO_IRQ to 0   Michal Simek
• [PATCH 5/5] microblaze: Introduce IRQ_SW_OFFSET to help with sw IRQ   Michal Simek
• [RFC PATCH] microblaze/irq: Change NO_IRQ to 0   Michal Simek
• [PATCH 2/4] ARM: OMAP2/3: intc: Add DT support for TI interrupt controller   Rob Herring
• [PATCH v2 00/10] OMAP4: Add DT support for i2c and twl6030   Benoit Cousson
• [PATCH v2 01/10] ARM: OMAP2+: pm: Do not init statically the SR and voltage layer with DT   Benoit Cousson
• [PATCH v2 00/10] OMAP4: Add DT support for i2c and twl6030   Cousson, Benoit
• [PATCH v2 00/10] OMAP4: Add DT support for i2c and twl6030   Benoit Cousson
• [PATCH v2 01/10] ARM: OMAP2+: pm: Do not init statically the SR and voltage layer with DT   Benoit Cousson
• [PATCH v2 02/10] i2c: OMAP: Add DT support for i2c controller   Benoit Cousson
• [PATCH v2 03/10] mfd: twl-core: Add initial DT support for twl4030/twl6030   Benoit Cousson
• [PATCH v2 04/10] rtc: rtc-twl: Add DT support for RTC inside twl4030/twl6030   Benoit Cousson
• [PATCH v2 05/10] arm/dts: OMAP4: Add i2c controller nodes   Benoit Cousson
• [PATCH v2 06/10] arm/dts: OMAP3: Add i2c controller nodes   Benoit Cousson
• [PATCH v2 07/10] arm/dts: omap4-panda: Add twl6030 and i2c EEPROM   Benoit Cousson
• [PATCH v2 08/10] arm/dts: omap4-sdp: Add twl6030, i2c3 and i2c4 devices   Benoit Cousson
• [PATCH v2 09/10] arm/dts: omap3-beagle: Add twl4030 and i2c EEPROM   Benoit Cousson
• [PATCH v2 10/10] ARM: OMAP2+: board-generic: Remove i2c static init   Benoit Cousson
• [PATCH 5/5] microblaze: Introduce IRQ_SW_OFFSET to help with sw IRQ   Rob Herring
• [PATCH v6 01/10] arm/tegra: initial device tree for tegra30   Rob Herring
• [PATCH v6 10/10] arm/tegra: add support for tegra30 based board cardhu   Rob Herring
• [PATCH 2/4] ARM: OMAP2/3: intc: Add DT support for TI interrupt controller   Cousson, Benoit
• [PATCH 2/4] ARM: OMAP2/3: intc: Add DT support for TI interrupt controller   Rob Herring
• [PATCH v6 10/10] arm/tegra: add support for tegra30 based board cardhu   Peter De Schrijver
• [PATCH 2/4] ARM: OMAP2/3: intc: Add DT support for TI interrupt controller   Cousson, Benoit
• [PATCH 2/4] ARM: OMAP2/3: intc: Add DT support for TI interrupt controller   Rob Herring
• [PATCH 2/4] ARM: OMAP2/3: intc: Add DT support for TI interrupt controller   Cousson, Benoit
• [PATCH v6 03/10] arm/tegra: prepare clock code for multiple tegra variants   Colin Cross
• [PATCH v6 04/10] arm/tegra: prepare early init for multiple tegra variants   Colin Cross
• [PATCH v5 0/9] Versatile Express DT support   Pawel Moll
• [PATCH v5 1/9] ARM: versatile: Add missing ENDPROC to headsmp.S   Pawel Moll
• [PATCH v5 2/9] ARM: vexpress: Get rid of MMIO_P2V   Pawel Moll
• [PATCH v5 3/9] ARM: vexpress: Add Device Tree support   Pawel Moll
• [PATCH v5 4/9] ARM: vexpress: Motherboard RS1 memory map support   Pawel Moll
• [PATCH v5 5/9] ARM: versatile: Map local timers using Device Tree when possible   Pawel Moll
• [PATCH v5 6/9] ARM: vexpress: Use FDT data in platform SMP calls   Pawel Moll
• [PATCH v5 7/9] ARM: vexpress: Add Device Tree for V2P-CA5s core tile   Pawel Moll
• [PATCH v5 8/9] ARM: vexpress: Add Device Tree for V2P-CA9 core tile   Pawel Moll
• [PATCH v5 9/9] ARM: vexpress: Add Device Tree for V2P-CA15 core tile (TC1 variant)   Pawel Moll
• [PATCH v2 2/6] ASoC: Allow the DAPM routes to be stored in device tree   Stephen Warren
• Representing SPMI bus in Device Tree   Michael Bohan
• [PATCH v2 01/10] ARM: OMAP2+: pm: Do not init statically the SR and voltage layer with DT   Kevin Hilman
• [PATCH 5/5] microblaze: Introduce IRQ_SW_OFFSET to help with sw IRQ   Michal Simek
• [PATCH v2 2/6] ASoC: Allow the DAPM routes to be stored in device tree   Mark Brown
• [PATCH v5 5/9] ARM: versatile: Map local timers using Device Tree when possible   Sergei Shtylyov
• [PATCH 1/5] ASoC: omap-dmic: Add device tree bindings   Mark Brown
• [PATCH 2/4] rtc-s3c: make room for more variants in devicetree block   Thomas Abraham
• [PATCH v6 04/10] arm/tegra: prepare early init for multiple tegra variants   Olof Johansson
• [PATCH v6 10/10] arm/tegra: add support for tegra30 based board cardhu   Olof Johansson
• [PATCH v3] mfd: mc13xxx: add device tree probe support   Shawn Guo
• [PATCH v2 3/4] regulator: mc13892: add device tree probe support   Shawn Guo
• [PATCH v2 3/4] regulator: mc13892: add device tree probe support   Mark Brown
• [PATCH v5 5/9] ARM: versatile: Map local timers using Device Tree when possible   Pawel Moll
• [PATCH v5 5/9] ARM: versatile: Map local timers using Device Tree when possible   Sergei Shtylyov
• [PATCH v5 5/9] ARM: versatile: Map local timers using Device Tree when possible   Pawel Moll
• [PATCH 2/4] rtc-s3c: make room for more variants in devicetree block   Heiko Stübner
• [PATCH v5 5/9] ARM: versatile: Map local timers using Device Tree when possible   Russell King - ARM Linux
• [PATCH v5 5/9] ARM: versatile: Map local timers using Device Tree when possible   Pawel Moll
• [PATCH] mfd: Add basic device tree binding for wm8994   Samuel Ortiz
• [PATCH v3 0/3] Add device tree support for mc13892 regulator driver   Shawn Guo
• [PATCH v3 1/3] mfd: mc13xxx: add device tree probe support   Shawn Guo
• [PATCH v3 2/3] regulator: mc13892: add device tree probe support   Shawn Guo
• [PATCH v3 3/3] arm/imx: add mc13892 support into imx51-babbage.dts   Shawn Guo
• [PATCH 0/2] ARM: Exynos: Adapt to generic power domain   Thomas Abraham
• [PATCH 1/2] PM / Domains: Add OF support   Thomas Abraham
• [PATCH 2/2] ARM: Exynos: Hook up power domains to generic power domain infrastructure   Thomas Abraham
• [PATCH v3] mfd: mc13xxx: add device tree probe support   Samuel Ortiz
• [PATCH v2 3/4] regulator: mc13892: add device tree probe support   Samuel Ortiz
• [PATCH 4/6] tegra: Add tegra keyboard support   Stephen Warren
• [PATCH 4/6] tegra: Add tegra keyboard support   Simon Glass
• [PATCH v2 09/17] tegra: usb: fdt: Add additional device tree definitions for USB ports   Stephen Warren
• [PATCH 10/14] tegra: usb: Add support for USB peripheral   Stephen Warren
• [PATCH 4/6] tegra: Add tegra keyboard support   Stephen Warren
• [PATCH 10/14] tegra: usb: Add support for USB peripheral   Simon Glass
• [PATCH v2 09/17] tegra: usb: fdt: Add additional device tree definitions for USB ports   Simon Glass
• Keyboard device tree bindings, and modifier mapping representation   Stephen Warren
• [PATCH v2 2/6] ASoC: Allow the DAPM routes to be stored in device tree   Stephen Warren
• [PATCH v2 2/6] ASoC: Allow the DAPM routes to be stored in device tree   Stephen Warren
• [PATCH 4/6] tegra: Add tegra keyboard support   Simon Glass
• [PATCH v2 REPOST] dtc: Add support for named integer constants   Stephen Warren
• [PATCH v2 REPOST] dtc: Add support for named integer constants   Simon Glass
• [PATCH v2 REPOST] dtc: Add support for named integer constants   Stephen Warren
• [PATCH] dt/device: Fix auxdata matching to handle entries without a name override   Grant Likely
• Initial DT clock bindings   Grant Likely
• [RFC v2 1/9] arm/versatile*: merge all versatile struct clk definitions   Grant Likely
• [RFC v2 2/9] arm/versatile*: Consolidate clk_ops and setvco implementations.   Grant Likely
• [RFC v2 3/9] of: Add of_property_match_string() to find index into a string list   Grant Likely
• [RFC v2 4/9] of: add clock providers   Grant Likely
• [RFC v2 5/9] dt/clock: Add handling for fixed clocks and a clock node setup iterator   Grant Likely
• [RFC v2 6/9] arm/dt: add devicetree support to sp804 timer support   Grant Likely
• [RFC v2 7/9] arm/dt: Common plat-versatile support for icst and sp804 based system clocks   Grant Likely
• [RFC v2 8/9] dt/arm: versatile add clock parsing   Grant Likely
• [RFC v2 9/9] arm/highbank: Use clock binding common support code   Grant Likely
• Initial DT clock bindings   Rob Herring
• [RFC v2 4/9] of: add clock providers   Jamie Iles
• [RFC v2 6/9] arm/dt: add devicetree support to sp804 timer support   Rob Herring
• [RFC v2 6/9] arm/dt: add devicetree support to sp804 timer support   Grant Likely
• [PATCH v2 2/6] ASoC: Allow the DAPM routes to be stored in device tree   Mark Brown
• [PATCH v2 2/6] ASoC: Allow the DAPM routes to be stored in device tree   Mark Brown
• [PATCH 2/4] ARM: OMAP2/3: intc: Add DT support for TI interrupt controller   Rajendra Nayak
• [PATCH v2 0/3] Device tree support for TWL regulators   Rajendra Nayak
• [PATCH v2 1/3] regulator: twl: adapt twl-regulator driver to dt   Rajendra Nayak
• [PATCH v2 2/3] ARM: omap4-sdp: Pass regulator data from dt   Rajendra Nayak
• [PATCH v2 3/3] omap4: panda: Pass regulator data from dt   Rajendra Nayak
• [PATCH v6 04/10] arm/tegra: prepare early init for multiple tegra variants   Peter De Schrijver
• [PATCH v6 03/10] arm/tegra: prepare clock code for multiple tegra variants   Peter De Schrijver
• [PATCH 1/3] ARM: OMAP2+: kconfig: Enable devicetree by default for OMAP2+ systems   Cousson, Benoit
• [PATCH 1/3] ARM: OMAP2+: kconfig: Enable devicetree by default for OMAP2+ systems   Tomi Valkeinen
• [RFC v2 4/9] of: add clock providers   Grant Likely
• [RFC v2 4/9] of: add clock providers   Rob Herring
• [RFC v2 4/9] of: add clock providers   Grant Likely
• [REPOST RFC PATCH 0/3] New "gpio-poweroff" driver to turn off platform devices with GPIOs   Kyle Moffett
• [REPOST RFC PATCH 1/3] of_gpio: Extend of_gpio_count() to support other property names   Kyle Moffett
• [REPOST RFC PATCH 2/3] of_gpio: Add new helpers for easily requesting lots of GPIOs   Kyle Moffett
• [REPOST RFC PATCH 3/3] New "gpio-poweroff" driver to turn off platform devices with GPIOs   Kyle Moffett
• [PATCH] arm,davinci: configure davinci aemif chipselects through OF   Nori, Sekhar
• [REPOST RFC PATCH 0/3] New "gpio-poweroff" driver to turn off platform devices with GPIOs   Rob Herring
• [REPOST RFC PATCH 0/3] New "gpio-poweroff" driver to turn off platform devices with GPIOs   Moffett, Kyle D
• [PATCH 1/3] ARM: OMAP2+: kconfig: Enable devicetree by default for OMAP2+ systems   Tony Lindgren
• [PATCH v2 02/10] i2c: OMAP: Add DT support for i2c controller   Kevin Hilman
• [PATCH v2 07/10] arm/dts: omap4-panda: Add twl6030 and i2c EEPROM   Kevin Hilman
• [PATCH v3 0/4] OMAP serial device tree support   Rajendra Nayak
• [PATCH v3 1/4] omap-serial: Get rid of all pdev->id usage   Rajendra Nayak
• [PATCH v3 2/4] omap-serial: Use default clock speed (48Mhz) if not specified   Rajendra Nayak
• [PATCH v3 3/4] omap-serial: Add minimal device tree support   Rajendra Nayak
• [PATCH v3 4/4] ARM: omap: pass minimal SoC/board data for UART from dt   Rajendra Nayak
• [REPOST RFC PATCH 0/3] New "gpio-poweroff" driver to turn off platform devices with GPIOs   Mark Brown
• [REPOST RFC PATCH 0/3] New "gpio-poweroff" driver to turn off platform devices with GPIOs   Mark Brown
• [PATCH v3 0/4] OMAP serial device tree support   Rob Herring
• [PATCH v3 0/4] OMAP serial device tree support   Govindraj
• [PATCH] arm, davinci: configure davinci aemif chipselects through OF   Ben Gardiner
• [PATCH v7 00/14] Add support for tegra30 and cardhu   Peter De Schrijver
• [PATCH v7 01/14] arm/tegra: initial device tree for tegra30   Peter De Schrijver
• [PATCH v7 02/14] arm/tegra: cleanup tegra20 support   Peter De Schrijver
• [PATCH v7 03/14] arm/tegra: prepare clock code for multiple tegra variants   Peter De Schrijver
• [PATCH v7 04/14] arm/tegra: don't export clk_measure_input_freq   Peter De Schrijver
• [PATCH v7 05/14] arm/tegra: prepare early init for multiple tegra variants   Peter De Schrijver
• [PATCH v7 06/14] arm/tegra: rename board-dt.c to board-dt-tegra20.c   Peter De Schrijver
• [PATCH v7 07/14] arm/tegra: use PMC reset   Peter De Schrijver
• [PATCH v7 08/14] arm/tegra: generalize L2 cache initialization   Peter De Schrijver
• [PATCH v7 09/14] arm/tegra: rename tegra20 pinmux files   Peter De Schrijver
• [PATCH v7 10/14] arm/tegra: prepare pinmux code for multiple tegra variants   Peter De Schrijver
• [PATCH v7 11/14] arm/tegra: add new fields to struct tegra_pingroup_desc   Peter De Schrijver
• [PATCH v7 12/14] arm/tegra: pinmux tables and definitions for tegra30   Peter De Schrijver
• [PATCH v7 13/14] arm/tegra: implement support for tegra30   Peter De Schrijver
• [PATCH v7 14/14] arm/tegra: add support for tegra30 based board cardhu   Peter De Schrijver
• [PATCH v3 0/4] OMAP serial device tree support   Kevin Hilman
• [PATCH 0/9] irq domain for gen irq chip and pl061 DT irq support   Rob Herring
• [PATCH 1/9] dt: add empty of_get_node/of_put_node functions   Rob Herring
• [PATCH 2/9] irq: check domain hwirq range for DT translate   Rob Herring
• [PATCH 3/9] irq: convert generic-chip to use irq_domain   Rob Herring
• [PATCH 4/9] gpio: pl061: use chained_irq_* functions in irq handler   Rob Herring
• [PATCH 5/9] gpio: pl061: convert to use 0 for no irq   Rob Herring
• [PATCH 6/9] ARM: realview: convert pl061 no irq to 0 instead of -1   Rob Herring
• [PATCH 7/9] gpio: pl061: convert to use generic irq chip   Rob Herring
• [PATCH 8/9] gpio: pl061: enable interrupts with DT style binding   Rob Herring
• [PATCH 9/9] ARM: highbank: add interrupt properties to gpio nodes   Rob Herring
• [PATCH 0/9] irq domain for gen irq chip and pl061 DT irq support   Rob Herring
• [PATCH 1/9] dt: add empty of_get_node/of_put_node functions   Grant Likely
• [PATCH 2/9] irq: check domain hwirq range for DT translate   Grant Likely
• [PATCH v2 07/10] arm/dts: omap4-panda: Add twl6030 and i2c EEPROM   Cousson, Benoit
• [PATCH v2 02/10] i2c: OMAP: Add DT support for i2c controller   Rob Herring
• [PATCH v3 0/4] OMAP serial device tree support   Alan Cox
• [PATCH 1/3] of/base: Take NULL string into account for property with multiple strings   Tony Lindgren
• [PATCH v3 0/4] OMAP serial device tree support   Greg KH
• [PATCH v3 4/4] ARM: omap: pass minimal SoC/board data for UART from dt   Tony Lindgren
• [PATCH 1/5] drivers: power: Rename bq20z75 to sbs-battery   Rhyland Klein
• [PATCH 1/5] drivers: power: Rename bq20z75 to sbs-battery   Matthew Garrett
• [REPOST RFC PATCH 0/3] New "gpio-poweroff" driver to turn off platform devices with GPIOs   Moffett, Kyle D
• [PATCH 3/9] irq: convert generic-chip to use irq_domain   Grant Likely
• [PATCH 4/9] gpio: pl061: use chained_irq_* functions in irq handler   Grant Likely
• [PATCH 5/9] gpio: pl061: convert to use 0 for no irq   Grant Likely
• [PATCH 6/9] ARM: realview: convert pl061 no irq to 0 instead of -1   Grant Likely
• [PATCH 7/9] gpio: pl061: convert to use generic irq chip   Grant Likely
• [PATCH 3/9] irq: convert generic-chip to use irq_domain   Rob Herring
• [PATCH 3/9] irq: convert generic-chip to use irq_domain   Grant Likely
• [PATCH 8/9] gpio: pl061: enable interrupts with DT style binding   Grant Likely
• [PATCH 9/9] ARM: highbank: add interrupt properties to gpio nodes   Grant Likely
• [PATCH resend] OF/device-tree: Add some entries to vendor-prefixes.txt   David Daney
• [PATCH 3/9] irq: convert generic-chip to use irq_domain   Rob Herring
• [PATCH resend] OF/device-tree: Add some entries to vendor-prefixes.txt   Rob Herring
• [PATCH v2 07/10] arm/dts: omap4-panda: Add twl6030 and i2c EEPROM   Kevin Hilman
• [PATCH v2 0/4] irq/of: Cleanup and Enchance irq_domain support.   David Daney
• [PATCH v2 1/4] irq: Get rid of irq_domain_for_each_hwirq().   David Daney
• [PATCH v2 2/4] irq/of/ARM: Make irq_domain hwirq type consistent throughout the kernel.   David Daney
• [PATCH v2 3/4] irq/of/ARM: Enhance irq iteration capability of irq_domain code.   David Daney
• [PATCH v2 4/4] MIPS: Octeon: Add irq_create_of_mapping() and GPIO interrupts.   David Daney
• [PATCH 2/9] irq: check domain hwirq range for DT translate   Shawn Guo
• [PATCH 3/9] irq: convert generic-chip to use irq_domain   Shawn Guo
• [PATCH 3/9] irq: convert generic-chip to use irq_domain   Shawn Guo
• [PATCH v3 4/4] ARM: omap: pass minimal SoC/board data for UART from dt   Rajendra Nayak
• [PATCH v3 4/4] ARM: omap: pass minimal SoC/board data for UART from dt   Cousson, Benoit
• [RFC V1 2/4] dts/imx6q: add cpufreq property   Shawn Guo
• [PATCH 3/9] irq: convert generic-chip to use irq_domain   Rob Herring
• [RFC v2 4/9] of: add clock providers   Shawn Guo
• [PATCH 3/9] irq: convert generic-chip to use irq_domain   Rob Herring
• [PATCH 3/9] irq: convert generic-chip to use irq_domain   Rob Herring
• [PATCH v6 0/9] Versatile Express DT support   Pawel Moll
• [PATCH v6 1/9] ARM: versatile: Add missing ENDPROC to headsmp.S   Pawel Moll
• [PATCH v6 2/9] ARM: vexpress: Get rid of MMIO_P2V   Pawel Moll
• [PATCH v6 3/9] ARM: versatile: Map local timers using Device Tree when possible   Pawel Moll
• [PATCH v6 4/9] ARM: vexpress: Use FDT data in platform SMP calls   Pawel Moll
• [PATCH v6 5/9] ARM: vexpress: Add Device Tree support   Pawel Moll
• [PATCH v6 6/9] ARM: vexpress: Motherboard RS1 memory map support   Pawel Moll
• [PATCH v6 7/9] ARM: vexpress: Add Device Tree for V2P-CA5s core tile   Pawel Moll
• [PATCH v6 8/9] ARM: vexpress: Add Device Tree for V2P-CA9 core tile   Pawel Moll
• [PATCH v6 9/9] ARM: vexpress: Add Device Tree for V2P-CA15 core tile (TC1 variant)   Pawel Moll
• [PATCH 3/9] irq: convert generic-chip to use irq_domain   Shawn Guo
• [PATCH 3/9] irq: convert generic-chip to use irq_domain   Shawn Guo
• [RFC v2 4/9] of: add clock providers   Rob Herring
• [PATCH 3/9] irq: convert generic-chip to use irq_domain   Shawn Guo
• [PATCH v6 3/9] ARM: versatile: Map local timers using Device Tree when possible   Rob Herring
• [PATCH v2 02/10] i2c: OMAP: Add DT support for i2c controller   Cousson, Benoit
• [RFC v2 4/9] of: add clock providers   Shawn Guo
• [RFC v2 5/9] dt/clock: Add handling for fixed clocks and a clock node setup iterator   Shawn Guo
• [PATCH v6 3/9] ARM: versatile: Map local timers using Device Tree when possible   Pawel Moll
• [PATCH v2 02/10] i2c: OMAP: Add DT support for i2c controller   Rob Herring
• [PATCH 3/9] irq: convert generic-chip to use irq_domain   Grant Likely
• [PATCH v2 02/10] i2c: OMAP: Add DT support for i2c controller   Cousson, Benoit
• [PATCH 3/9] irq: convert generic-chip to use irq_domain   Rob Herring
• [PATCH 1/3] ARM: OMAP2+: kconfig: Enable devicetree by default for OMAP2+ systems   Cousson, Benoit
• [PATCH 3/9] irq: convert generic-chip to use irq_domain   Grant Likely
• [PATCH] arm,davinci: configure davinci aemif chipselects through OF   Nori, Sekhar
• [PATCH v6 3/9] ARM: versatile: Map local timers using Device Tree when possible   Pawel Moll
• [RFC v2 4/9] of: add clock providers   Grant Likely
• [PATCH 2/4] ARM: OMAP2/3: intc: Add DT support for TI interrupt controller   Cousson, Benoit
• [PATCH v7 00/14] Add support for tegra30 and cardhu   Olof Johansson
• [PATCH 0/6] ARM: at91: irqdomain and device tree for AIC and GPIO   Nicolas Ferre
• [PATCH v4 1/6] ARM: at91/aic: add irq domain and device tree support   Nicolas Ferre
• [PATCH 2/6] ARM: at91/gpio: add irqdomain to gpio interrupts   Nicolas Ferre
• [PATCH 3/6] ARM: at91/gpio: add DT support   Nicolas Ferre
• [PATCH 4/6] ARM: at91/gpio: add .to_irq gpio_chip handler and rework irq_to_gpio   Nicolas Ferre
• [PATCH 5/6] ARM: at91/gpio: remove the static specification of gpio_chip.base   Nicolas Ferre
• [PATCH 6/6] ARM: at91/board-dt: remove AIC irq domain from board file   Nicolas Ferre
• [PATCH 2/4] ARM: OMAP2/3: intc: Add DT support for TI interrupt controller   Rob Herring
• [PATCH v7 00/14] Add support for tegra30 and cardhu   Stephen Warren
• [PATCH v3 4/4] ARM: omap: pass minimal SoC/board data for UART from dt   Tony Lindgren
• [PATCH v3 4/4] ARM: omap: pass minimal SoC/board data for UART from dt   Cousson, Benoit
• [PATCH v3 4/4] ARM: omap: pass minimal SoC/board data for UART from dt   Tony Lindgren
• [PATCH] arm/dts: Add minimal device tree support for omap2420 and omap2430   Tony Lindgren
• [PATCH v7 00/14] Add support for tegra30 and cardhu   Colin Cross
• [PATCH v5 4/5] Add fdtget utility to read property values from a device tree   Simon Glass
• [PATCH 0/6] ARM: at91: irqdomain and device tree for AIC and GPIO   Rob Herring
• [RFC V1 2/4] dts/imx6q: add cpufreq property   Richard Zhao
• [PATCH] arm/dts: Add minimal device tree support for omap2420 and omap2430   Rajendra Nayak
• [PATCH] arm/dts: Add support for OMAP3 Mistral EVM board   Vaibhav Hiremath
• [PATCH] arm/dts: Add support for OMAP3 Mistral EVM board   Hiremath, Vaibhav
• [PATCH-V1] arm/dts: Add support for TI OMAP3 EVM board   Vaibhav Hiremath
• [PATCH 3/6] ARM: at91/gpio: add DT support   Jamie Iles
• [PATCH V2 0/4] add arm soc generic cpufreq driver   Richard Zhao
• [PATCH V2 1/4] cpufreq: add arm soc generic cpufreq driver   Richard Zhao
• [PATCH V2 2/4] dts/imx6q: add cpufreq property   Richard Zhao
• [PATCH V2 3/4] arm/imx6q: register arm_clk as cpu to clkdev   Richard Zhao
• [PATCH V2 4/4] arm/imx6q: select ARCH_HAS_CPUFREQ   Richard Zhao
• [PATCH V2 1/4] cpufreq: add arm soc generic cpufreq driver   Jamie Iles
• [PATCH V2 1/4] cpufreq: add arm soc generic cpufreq driver   Heiko Stübner
• [PATCH V2 1/4] cpufreq: add arm soc generic cpufreq driver   Rob Herring
• [PATCH v3 4/4] ARM: omap: pass minimal SoC/board data for UART from dt   Cousson, Benoit
• [PATCH 1/3] ARM: OMAP2+: kconfig: Enable devicetree by default for OMAP2+ systems   Cousson, Benoit
• [PATCH 0/6] ARM: at91: irqdomain and device tree for AIC and GPIO   Nicolas Ferre
• [PATCH V2 3/4] arm/imx6q: register arm_clk as cpu to clkdev   Mark Langsdorf
• [PATCH V2 1/4] cpufreq: add arm soc generic cpufreq driver   Bryan Huntsman
• [PATCH v3 0/4] OMAP serial device tree support   Tony Lindgren
• [PATCH v3 0/4] OMAP serial device tree support   Rob Herring
• [PATCH v3 0/4] OMAP serial device tree support   Tony Lindgren
• [PATCH v3 0/4] OMAP serial device tree support   Tony Lindgren
• [PATCH 1/3] ARM: OMAP2+: kconfig: Enable devicetree by default for OMAP2+ systems   Tony Lindgren
• [PATCH] x86: convert to generic irq_domain   Rob Herring
• [PATCH V2 3/4] arm/imx6q: register arm_clk as cpu to clkdev   Richard Zhao
• [PATCH V2 1/4] cpufreq: add arm soc generic cpufreq driver   Richard Zhao
• [PATCH V2 1/4] cpufreq: add arm soc generic cpufreq driver   Richard Zhao
• [PATCH V2 1/4] cpufreq: add arm soc generic cpufreq driver   Richard Zhao
• [PATCH V2 1/4] cpufreq: add arm soc generic cpufreq driver   Richard Zhao
• [REPOST RFC PATCH 0/3] New "gpio-poweroff" driver to turn off platform devices with GPIOs   Mark Brown
• [PATCH V2 1/4] cpufreq: add arm soc generic cpufreq driver   Arnd Bergmann
• [RFC PATCH 2/3] dt: device tree bindings for TI's EMIF sdram controller   Aneesh V
• [RFC PATCH 0/3] dt: device tree bindigs and data for EMIF and DDR   Aneesh V
• [RFC PATCH 1/3] dt: device tree bindings for DDR memories   Aneesh V
• [RFC PATCH 3/3] dt: EMIF and lpddr2 device tree data for OMAP4 boards   Aneesh V
• [PATCH v7 00/14] Add support for tegra30 and cardhu   Olof Johansson
• [PATCH 1/3] i2c: tegra: Support DVC controller in device tree   Stephen Warren
• [PATCH 2/3] arm/dt: tegra: Use new compatible value for DVC I2C controller   Stephen Warren
• [PATCH 3/3] arm/dt: Add ADT7461 to Seaboard   Stephen Warren
• [PATCH 1/3] i2c: tegra: Support DVC controller in device tree   Olof Johansson
• [PATCH V2 1/4] i2c: tegra: Add __devinit/exit to probe/remove   Stephen Warren
• [PATCH V2 2/4] i2c: tegra: Support DVC controller in device tree   Stephen Warren
• [PATCH V2 3/4] arm/dt: tegra: Use new compatible value for DVC I2C controller   Stephen Warren
• [PATCH V2 4/4] arm/dt: Add ADT7461 to Seaboard   Stephen Warren
• [PATCH 1/2] gpio: add a driver for the Synopsys DesignWare APB GPIO block   Jamie Iles
• [PATCH 2/2] ARM: picoxcell: use new Synopsys Designware GPIO binding   Jamie Iles
• [PATCH V2 1/4] cpufreq: add arm soc generic cpufreq driver   Richard Zhao
• [PATCH V2 1/2] mcx: very basic support for HTKW mcx board   Igor Grinberg
• [PATCH 1/3] i2c: tegra: Support DVC controller in device tree   Thierry Reding
• [PATCH 1/3] i2c: tegra: Support DVC controller in device tree   Thierry Reding
• [PATCH 1/2] gpio: add a driver for the Synopsys DesignWare APB GPIO block   Linus Walleij
• [PATCH 1/2] gpio: add a driver for the Synopsys DesignWare APB GPIO block   Jamie Iles
• [PATCH V2 1/4] cpufreq: add arm soc generic cpufreq driver   Richard Zhao
• [PATCH 1/2] gpio: add a driver for the Synopsys DesignWare APB GPIO block   Rob Herring
• [PATCH V3 0/7] add a generic cpufreq driver   Richard Zhao
• [PATCH V3 1/7] ARM: add cpufreq transiton notifier to adjust loops_per_jiffy for smp   Richard Zhao
• [PATCH V3 2/7] arm/imx: cpufreq: remove loops_per_jiffy recalculate for smp   Richard Zhao
• [PATCH V3 3/7] cpufreq: OMAP: remove loops_per_jiffy recalculate for smp   Richard Zhao
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Richard Zhao
• [PATCH V3 5/7] dts/imx6q: add cpufreq property   Richard Zhao
• [PATCH V3 6/7] arm/imx6q: register arm_clk as cpu to clkdev   Richard Zhao
• [PATCH V3 7/7] arm/imx6q: select ARCH_HAS_CPUFREQ   Richard Zhao
• [PATCH V2 1/4] i2c: tegra: Add __devinit/exit to probe/remove   Shubhrajyoti Datta
• [PATCH 1/2] gpio: add a driver for the Synopsys DesignWare APB GPIO block   Jamie Iles
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Jamie Iles
• [PATCH v2 03/10] mfd: twl-core: Add initial DT support for twl4030/twl6030   Samuel Ortiz
• [PATCH v7 00/14] Add support for tegra30 and cardhu   Peter De Schrijver
• [PATCH 2/9] irq: check domain hwirq range for DT translate   Cousson, Benoit
• [PATCH 0/3] of: Add support for named irq and reg   Cousson, Benoit
• [PATCH v2 03/10] mfd: twl-core: Add initial DT support for twl4030/twl6030   Cousson, Benoit
• [PATCH 1/3] of/base: Take NULL string into account for property with multiple strings   Rob Herring
• [RFC v2 PATCH 0/3] dt: device tree bindings and data for EMIF and DDR   Aneesh V
• [RFC v2 PATCH 1/3] dt: device tree bindings for DDR memories   Aneesh V
• [RFC v2 PATCH 2/3] dt: device tree bindings for TI's EMIF sdram controller   Aneesh V
• [RFC v2 PATCH 3/3] arm/dts: EMIF and lpddr2 device tree data for OMAP4 boards   Aneesh V
• [PATCH v3 2/3] regulator: mc13892: add device tree probe support   Shawn Guo
• [PATCH v2] microblaze: Change NO_IRQ to 0   Michal Simek
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Richard Zhao
• [PATCH 2/9] irq: check domain hwirq range for DT translate   Rob Herring
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Jamie Iles
• [PATCH] x86: convert to generic irq_domain   Sebastian Andrzej Siewior
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Rob Herring
• [PATCH 2/9] irq: check domain hwirq range for DT translate   Cousson, Benoit
• [PATCH v2 04/10] rtc: rtc-twl: Add DT support for RTC inside twl4030/twl6030   Cousson, Benoit
• [RFC v2 PATCH 1/3] dt: device tree bindings for DDR memories   Olof Johansson
• [RFC v2 PATCH 2/3] dt: device tree bindings for TI's EMIF sdram controller   Olof Johansson
• [REPOST RFC PATCH 0/3] New "gpio-poweroff" driver to turn off platform devices with GPIOs   Moffett, Kyle D
• [RFC v2 PATCH 2/3] dt: device tree bindings for TI's EMIF sdram controller   Olof Johansson
• [PATCH V2 1/4] i2c: tegra: Add __devinit/exit to probe/remove   Stephen Warren
• [PATCH V2 1/4] cpufreq: add arm soc generic cpufreq driver   Stephen Boyd
• [PATCH v2] gpio: pl061: convert to use generic irq chip   Rob Herring
• [PATCH v2] gpio: pl061: enable interrupts with DT style binding   Rob Herring
• [PATCH] irqdomain: include linux/bug.h for WARN_ON()   Jamie Iles
• [RFC v2 PATCH 0/3] dt: device tree bindings and data for EMIF and DDR   Rob Herring
• [PATCH v2] microblaze: Change NO_IRQ to 0   Ryan Mallon
• [RFC v2 PATCH 0/3] dt: device tree bindings and data for EMIF and DDR   Tony Lindgren
• [PATCH v3 2/3] regulator: mc13892: add device tree probe support   Mark Brown
• [PATCH v3 1/3] mfd: mc13xxx: add device tree probe support   Mark Brown
• [PATCH v2 1/3] regulator: twl: adapt twl-regulator driver to dt   Mark Brown
• [PATCH v3 2/3] regulator: mc13892: add device tree probe support   Mark Brown
• [PATCH v3 2/3] regulator: mc13892: add device tree probe support   Shawn Guo
• [REPOST RFC PATCH 0/3] New "gpio-poweroff" driver to turn off platform devices with GPIOs   Mark Brown
• [PATCHv2 1/2] gpio: add a driver for the Synopsys DesignWare APB GPIO block   Jamie Iles
• [PATCHv2 2/2] ARM: picoxcell: use new Synopsys Designware GPIO binding   Jamie Iles
• [REPOST RFC PATCH 0/3] New "gpio-poweroff" driver to turn off platform devices with GPIOs   Moffett, Kyle D
• [PATCH V2 1/4] i2c: tegra: Add __devinit/exit to probe/remove   Olof Johansson
• [PATCH V2 2/4] i2c: tegra: Support DVC controller in device tree   Olof Johansson
• [PATCH V2 3/4] arm/dt: tegra: Use new compatible value for DVC I2C controller   Olof Johansson
• [PATCH V2 4/4] arm/dt: Add ADT7461 to Seaboard   Olof Johansson
• [PATCH v3 1/3] mfd: mc13xxx: add device tree probe support   Mark Brown
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Richard Zhao
• [PATCH v3 1/3] mfd: mc13xxx: add device tree probe support   Shawn Guo
• [PATCH v3 2/3] regulator: mc13892: add device tree probe support   Shawn Guo
• [PATCH v3 1/3] mfd: mc13xxx: add device tree probe support   Shawn Guo
• [PATCH V2 1/4] i2c: tegra: Add __devinit/exit to probe/remove   Shubhrajyoti Datta
• [RFC v2 PATCH 1/3] dt: device tree bindings for DDR memories   Aneesh V
• [RFC v2 PATCH 2/3] dt: device tree bindings for TI's EMIF sdram controller   Aneesh V
• [RFC v2 PATCH 2/3] dt: device tree bindings for TI's EMIF sdram controller   Aneesh V
• [PATCH v2] microblaze: Change NO_IRQ to 0   Michal Simek
• [RFC v2 PATCH 0/3] dt: device tree bindings and data for EMIF and DDR   Aneesh V
• [RFC 0/7] Add PWM device-tree support.   Thierry Reding
• [RFC 1/7] PWM: add pwm framework support   Thierry Reding
• [RFC 2/7] pwm: Allow chips to support multiple PWMs.   Thierry Reding
• [RFC 3/7] of: Add PWM support.   Thierry Reding
• [RFC 4/7] arm: tegra: Fix PWM clock programming   Thierry Reding
• [RFC 5/7] arm: tegra: Provide clock for only one PWM controller.   Thierry Reding
• [RFC 6/7] pwm: Add Tegra2 SoC support   Thierry Reding
• [RFC 7/7] pwm-backlight: Add rudimentary device-tree support   Thierry Reding
• [RFC v2 PATCH 0/3] dt: device tree bindings and data for EMIF and DDR   Aneesh V
• [PATCH v3 1/3] mfd: mc13xxx: add device tree probe support   Mark Brown
• [PATCH v5 4/5] Add fdtget utility to read property values from a device tree   David Gibson
• [RFC v2 PATCH 0/3] dt: device tree bindings and data for EMIF and DDR   Cousson, Benoit
• [PATCH 3/3] ARM: OMAP2+: board-generic: Replace #if defined by #ifdef for consistency   Cousson, Benoit
• [RFC 0/7] Add PWM device-tree support.   Rob Herring
• [PATCH v2 0/5] ARM: OMAP2+: Interrupt controllers adaptation to DT   Benoit Cousson
• [PATCH v2 1/5] arm/dts: OMAP4: Update DTS file with new GIC bindings   Benoit Cousson
• [PATCH v2 2/5] ARM: OMAP2/3: intc: Add irqdomain support   Benoit Cousson
• [PATCH v2 3/5] ARM: OMAP2/3: intc: Add DT support for TI interrupt controller   Benoit Cousson
• [PATCH v2 4/5] arm/dts: OMAP3: Add interrupt-controller bindings for INTC   Benoit Cousson
• [PATCH v2 5/5] ARM: OMAP2+: board-generic: Use of_irq_init API   Benoit Cousson
• [RFC 0/7] Add PWM device-tree support.   Thierry Reding
• [PATCH v3 1/3] mfd: mc13xxx: add device tree probe support   Shawn Guo
• [RFC v2 PATCH 0/3] dt: device tree bindings and data for EMIF and DDR   Aneesh V
• [PATCH v3 1/3] mfd: mc13xxx: add device tree probe support   Mark Brown
• [REPOST RFC PATCH 0/3] New "gpio-poweroff" driver to turn off platform devices with GPIOs   Mark Brown
• [PATCH V2 1/4] cpufreq: add arm soc generic cpufreq driver   Mark Brown
• [PATCH 1/2] gpio: add a driver for the Synopsys DesignWare APB GPIO block   Mark Brown
• [PATCH 1/2] gpio: add a driver for the Synopsys DesignWare APB GPIO block   Mark Brown
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Mark Brown
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Rob Herring
• [PATCH v2 04/10] rtc: rtc-twl: Add DT support for RTC inside twl4030/twl6030   Cousson, Benoit
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Arnd Bergmann
• [PATCH v3 1/3] mfd: mc13xxx: add device tree probe support   Shawn Guo
• [PATCHv2 1/2] gpio: add a driver for the Synopsys DesignWare APB GPIO block   Rob Herring
• [PATCHv2 1/2] gpio: add a driver for the Synopsys DesignWare APB GPIO block   Jamie Iles
• [PATCHv2 1/2] gpio: add a driver for the Synopsys DesignWare APB GPIO block   Rob Herring
• [PATCH v3 00/11] OMAP4: Add DT support for i2c and twl6030   Benoit Cousson
• [PATCH v3 01/11] ARM: OMAP2+: pm: Do not init statically the SR and voltage layer with DT   Benoit Cousson
• [PATCH v3 02/11] i2c: OMAP: Add DT support for i2c controller   Benoit Cousson
• [PATCH v3 03/11] rtc: rtc-twl: Add DT support for RTC inside twl4030/twl6030   Benoit Cousson
• [PATCH v3 04/11] arm/dts: OMAP4: Add i2c controller nodes   Benoit Cousson
• [PATCH v3 05/11] arm/dts: OMAP3: Add i2c controller nodes   Benoit Cousson
• [PATCH v3 06/11] arm/dts: twl6030: Add DTS file for twl6030 PMIC   Benoit Cousson
• [PATCH v3 07/11] arm/dts: twl4030: Add DTS file for twl4030 PM + Audio IC   Benoit Cousson
• [PATCH v3 08/11] arm/dts: omap4-panda: Add twl6030 and i2c EEPROM   Benoit Cousson
• [PATCH v3 09/11] arm/dts: omap4-sdp: Add twl6030, i2c3 and i2c4 devices   Benoit Cousson
• [PATCH v3 10/11] arm/dts: omap3-beagle: Add twl4030 and i2c EEPROM   Benoit Cousson
• [PATCH v3 11/11] ARM: OMAP2+: board-generic: Remove i2c static init   Benoit Cousson
• [PATCH v3 02/11] i2c: OMAP: Add DT support for i2c controller   Rob Herring
• [PATCH v3 07/11] arm/dts: twl4030: Add DTS file for twl4030 PM + Audio IC   Rob Herring
• [PATCH v3 07/11] arm/dts: twl4030: Add DTS file for twl4030 PM + Audio IC   Rob Herring
• [RFC PATCH v3 3/5] pinctrl: imx: add pinctrl imx driver   Dong Aisheng
• [RFC PATCH v3 0/5] pinctrl: imx: add pinnmux support   Dong Aisheng
• [RFC PATCH v3 1/5] dt: add of_get_child_count helper function   Dong Aisheng
• [RFC PATCH v3 2/5] pinctrl: add dt binding support for pinmux mappings   Dong Aisheng
• [RFC PATCH v3 4/5] ARM: imx6q: using pinmux subsystem   Dong Aisheng
• [RFC PATCH v3 5/5] mmc: sdhci-esdhc-imx: using pinmux subsystem   Dong Aisheng
• [PATCH 1/1] dt: reform for_each_property to for_each_property_of_node_of_node   Dong Aisheng
• [PATCH 1/1] dt: fix some code indent issue in of.h   Dong Aisheng
• [RFC PATCH v3 1/5] dt: add of_get_child_count helper function   Rob Herring
• [PATCH 1/1] dt: fix some code indent issue in of.h   Rob Herring
• [PATCH 1/1] dt: reform for_each_property to for_each_property_of_node_of_node   Rob Herring
• [RFC PATCH v3 1/5] dt: add of_get_child_count helper function   Marek Vasut
• [RFC PATCH v3 2/5] pinctrl: add dt binding support for pinmux mappings   Marek Vasut
• [RFC PATCH v3 3/5] pinctrl: imx: add pinctrl imx driver   Marek Vasut
• [PATCH v3 02/11] i2c: OMAP: Add DT support for i2c controller   Olof Johansson
• [PATCH V2 1/4] i2c: tegra: Add __devinit/exit to probe/remove   Stephen Warren
• [PATCH] ARM/of: allow *machine_desc.dt_compat to be const   Uwe Kleine-König
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Richard Zhao
• [RFC 1/7] PWM: add pwm framework support   Stephen Warren
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Richard Zhao
• [RFC 6/7] pwm: Add Tegra2 SoC support   Olof Johansson
• [RFC 2/7] pwm: Allow chips to support multiple PWMs.   Stephen Warren
• [RFC 3/7] of: Add PWM support.   Stephen Warren
• [RFC 4/7] arm: tegra: Fix PWM clock programming   Stephen Warren
• [RFC 5/7] arm: tegra: Provide clock for only one PWM controller.   Stephen Warren
• [RFC 6/7] pwm: Add Tegra2 SoC support   Stephen Warren
• [PATCH v3 1/3] mfd: mc13xxx: add device tree probe support   Mark Brown
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Richard Zhao
• [RFC 7/7] pwm-backlight: Add rudimentary device-tree support   Stephen Warren
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Mark Brown
• [RFC PATCH v3 1/5] dt: add of_get_child_count helper function   Stephen Warren
• [RFC PATCH v3 2/5] pinctrl: add dt binding support for pinmux mappings   Stephen Warren
• [RFC 1/7] PWM: add pwm framework support   Mark Brown
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Richard Zhao
• [PATCH v3 1/3] mfd: mc13xxx: add device tree probe support   Shawn Guo
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Mark Brown
• [PATCH v3 1/3] mfd: mc13xxx: add device tree probe support   Mark Brown
• [PATCH v3 1/3] mfd: mc13xxx: add device tree probe support   Shawn Guo
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Richard Zhao
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Mark Brown
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Richard Zhao
• [RFC PATCH v3 1/5] dt: add of_get_child_count helper function   Dong Aisheng-B29396
• [PATCH 1/1] dt: fix some code indent issue in of.h   Dong Aisheng-B29396
• [PATCH 1/1] dt: reform for_each_property to for_each_property_of_node_of_node   Dong Aisheng-B29396
• [RFC PATCH v3 3/5] pinctrl: imx: add pinctrl imx driver   Dong Aisheng-B29396
• [RFC PATCH v3 1/5] dt: add of_get_child_count helper function   Dong Aisheng-B29396
• [RFC PATCH v3 1/5] dt: add of_get_child_count helper function   Dong Aisheng-B29396
• [RFC PATCH v3 1/5] dt: add of_get_child_count helper function   Lothar Waßmann
• [RFC 6/7] pwm: Add Tegra2 SoC support   Thierry Reding
• [RFC 2/7] pwm: Allow chips to support multiple PWMs.   Thierry Reding
• [RFC 3/7] of: Add PWM support.   Thierry Reding
• [RFC 4/7] arm: tegra: Fix PWM clock programming   Thierry Reding
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Richard Zhao
• [RFC 7/7] pwm-backlight: Add rudimentary device-tree support   Thierry Reding
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Arnd Bergmann
• [RFC 1/8] gpio/microblaze: Eliminate duplication of of_get_named_gpio_flags()   Michal Simek
• [PATCH 1/1] dt: fix some code indent issue in of.h   Andy Whitcroft
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Kay Sievers
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Mark Brown
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Mark Brown
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Kay Sievers
• [RFC 2/7] pwm: Allow chips to support multiple PWMs.   Thierry Reding
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Richard Zhao
• [PATCH V3 1/7] ARM: add cpufreq transiton notifier to adjust loops_per_jiffy for smp   Richard Zhao
• [PATCH 1/4] block: xsysace: Don't use NO_IRQ   Michal Simek
• [PATCH 2/4] net: ethernet: xilinx: Don't use NO_IRQ in xilinx   Michal Simek
• [PATCH 3/4] input: xilinx_ps2: Don't use NO_IRQ   Michal Simek
• [PATCH 4/4] microblaze: Remove NO_IRQ from architecture   Michal Simek
• [PATCH v4 0/4] Add device tree support for mc13892 regulator driver   Shawn Guo
• [PATCH 1/4] mfd: improve mc13xxx dt binding document   Shawn Guo
• [PATCH 2/4] regulator: mc13892: remove the unnecessary prefix from regulator name   Shawn Guo
• [PATCH 3/4] regulator: mc13892: add device tree probe support   Shawn Guo
• [PATCH 4/4] arm/imx: add mc13892 support into imx51-babbage.dts   Shawn Guo
• [PATCH] serial/efm32: add new driver   Uwe Kleine-König
• [PATCH V3 0/2] Support for HTKW mcx   Ilya Yanok
• [PATCH V3 1/2] mcx: very basic support for HTKW mcx board   Ilya Yanok
• [PATCH V3 2/2] mcx: support for HTKW mcx board   Ilya Yanok
• [PATCH V3 0/2] Support for HTKW mcx   Ilya Yanok
• [PATCH V3 2/2] mcx: support for HTKW mcx board   Ilya Yanok
• [PATCH V3 1/2] mcx: very basic support for HTKW mcx board   Ilya Yanok
• [RFC 4/7] arm: tegra: Fix PWM clock programming   Stephen Warren
• [RFC 2/7] pwm: Allow chips to support multiple PWMs.   Stephen Warren
• [RFC 7/7] pwm-backlight: Add rudimentary device-tree support   Stephen Warren
• [RFC 7/7] pwm-backlight: Add rudimentary device-tree support   Mitch Bradley
• [PATCH 3/3] ARM: OMAP2+: board-generic: Replace #if defined by #ifdef for consistency   Tony Lindgren
• [PATCH] serial/efm32: add new driver   Alan Cox
• [PATCH 2/4] net: ethernet: xilinx: Don't use NO_IRQ in xilinx   David Miller
• [PATCH 4/4] microblaze: Remove NO_IRQ from architecture   Ryan Mallon
• pata_of_platform.c cannot build on sparc   David Miller
• [PATCH] pata_of_platform: remove direct dependency on OF_IRQ   Rob Herring
• pata_of_platform.c cannot build on sparc   Rob Herring
• pata_of_platform.c cannot build on sparc   David Miller
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Mark Brown
• pata_of_platform.c cannot build on sparc   Jeff Garzik
• [PATCH v5 4/5] Add fdtget utility to read property values from a device tree   Simon Glass
• [RFC 2/7] pwm: Allow chips to support multiple PWMs.   Thierry Reding
• [PATCH v4 0/7] add a generic cpufreq driver   Richard Zhao
• [PATCH v4 1/7] ARM: add cpufreq transiton notifier to adjust loops_per_jiffy for smp   Richard Zhao
• [PATCH v4 2/7] arm/imx: cpufreq: remove loops_per_jiffy recalculate for smp   Richard Zhao
• [PATCH v4 3/7] cpufreq: OMAP: remove loops_per_jiffy recalculate for smp   Richard Zhao
• [PATCH v4 5/7] dts/imx6q: add cpufreq property   Richard Zhao
• [PATCH v4 6/7] arm/imx6q: register arm_clk as cpu to clkdev   Richard Zhao
• [PATCH v4 7/7] arm/imx6q: select ARCH_HAS_CPUFREQ   Richard Zhao
• [PATCH v4 4/7] cpufreq: add clk-reg cpufreq driver   Richard Zhao
• [RFC 7/7] pwm-backlight: Add rudimentary device-tree support   Thierry Reding
• [PATCH 4/4] microblaze: Remove NO_IRQ from architecture   Michal Simek
• [RFC PATCH v3 2/5] pinctrl: add dt binding support for pinmux mappings   Dong Aisheng-B29396
• [PATCH v2 02/10] i2c: OMAP: Add DT support for i2c controller   Shubhrajyoti
• [PATCH v3 02/11] i2c: OMAP: Add DT support for i2c controller   Cousson, Benoit
• [PATCH] serial/efm32: add new driver   Uwe Kleine-König
• [PATCH 1/4] mfd: improve mc13xxx dt binding document   Mark Brown
• [PATCH 2/4] regulator: mc13892: remove the unnecessary prefix from regulator name   Mark Brown
• [PATCH 3/4] regulator: mc13892: add device tree probe support   Mark Brown
• [PATCH 2/4] regulator: mc13892: remove the unnecessary prefix from regulator name   Shawn Guo
• [PATCH v2 1/1] dt: reform for_each_property to for_each_property_of_node   Dong Aisheng
• [PATCH] serial/efm32: add new driver   Uwe Kleine-König
• pata_of_platform.c cannot build on sparc   Rob Herring
• [PATCH v3 02/11] i2c: OMAP: Add DT support for i2c controller   Cousson, Benoit
• [PATCH v5 4/5] Add fdtget utility to read property values from a device tree   Jon Loeliger
• [PATCH v4 00/12] OMAP4: Add DT support for i2c and twl6030   Benoit Cousson
• [PATCH v4 01/12] ARM: OMAP2+: pm: Do not init statically the SR and voltage layer with DT   Benoit Cousson
• [PATCH v4 02/12] i2c: OMAP: Add DT support for i2c controller   Benoit Cousson
• [PATCH v4 03/12] mfd: twl-core: Add initial DT support for twl4030/twl6030   Benoit Cousson
• [PATCH v4 04/12] rtc: rtc-twl: Add DT support for RTC inside twl4030/twl6030   Benoit Cousson
• [PATCH v4 05/12] arm/dts: OMAP4: Add i2c controller nodes   Benoit Cousson
• [PATCH v4 06/12] arm/dts: OMAP3: Add i2c controller nodes   Benoit Cousson
• [PATCH v4 07/12] arm/dts: twl6030: Add DTS file for twl6030 PMIC   Benoit Cousson
• [PATCH v4 08/12] arm/dts: twl4030: Add DTS file for twl4030 PM + Audio IC   Benoit Cousson
• [PATCH v4 09/12] arm/dts: omap4-panda: Add twl6030 and i2c EEPROM   Benoit Cousson
• [PATCH v4 10/12] arm/dts: omap4-sdp: Add twl6030, i2c3 and i2c4 devices   Benoit Cousson
• [PATCH v4 11/12] arm/dts: omap3-beagle: Add twl4030 and i2c EEPROM   Benoit Cousson
• [PATCH v4 12/12] ARM: OMAP2+: board-generic: Remove i2c static init   Benoit Cousson
• [PATCH v3 00/11] OMAP4: Add DT support for i2c and twl6030   Rob Herring
• [PATCH v2 1/1] dt: reform for_each_property to for_each_property_of_node   Rob Herring
• [PATCH 1/4] mfd: improve mc13xxx dt binding document   Samuel Ortiz
• [PATCH] fsl/mpic: Document and use the "big-endian" device-tree flag   Kyle Moffett
• [PATCH v4 03/12] mfd: twl-core: Add initial DT support for twl4030/twl6030   Samuel Ortiz
• pata_of_platform.c cannot build on sparc   Jeff Garzik
• pata_of_platform.c cannot build on sparc   Sergei Shtylyov
• [PATCH 0/6] powerpc/mpic: More general cleanups and fixups   Kyle Moffett
• [PATCH 1/6] powerpc/mpic: Fix use of "flags" variable in mpic_alloc()   Kyle Moffett
• [PATCH 2/6] fsl/mpic: Document and use the "big-endian" device-tree flag   Kyle Moffett
• [PATCH 3/6] fsl/mpic: Create and document the "single-cpu-affinity" device-tree flag   Kyle Moffett
• [PATCH 4/6] powerpc/mpic: Remove MPIC_BROKEN_FRR_NIRQS and duplicate irq_count   Kyle Moffett
• [PATCH 5/6] powerpc/mpic: Add "last-interrupt-source" property to override hardware   Kyle Moffett
• [PATCH 6/6] powerpc/mpic: Remove duplicate MPIC_WANTS_RESET flag   Kyle Moffett
• [PATCH 7/9] arm/tegra: emc: device tree bindings   Olof Johansson
• [PATCH] dt/tegra: seaboard: add i2c devices   Olof Johansson
• [PATCH] Input: mpu3050: add of_match table for device-tree probing   Olof Johansson
• [PATCH] staging:iio: isl29018: add of_match table for device-tree probing   Olof Johansson
• [PATCH] staging:iio: ak8975: add of_match table for device-tree probing   Olof Johansson
• [PATCH v3 00/11] OMAP4: Add DT support for i2c and twl6030   Cousson, Benoit
• [PATCH] Input: mpu3050: add of_match table for device-tree probing   Dmitry Torokhov
• [PATCH v2 0/5] ARM: OMAP2+: Interrupt controllers adaptation to DT   Cousson, Benoit
• [PATCH] serial/efm32: add new driver   Arnd Bergmann
• [PATCH v4 4/7] cpufreq: add clk-reg cpufreq driver   Mark Brown
• [PATCH] Input: mpu3050: add of_match table for device-tree probing   Olof Johansson
• [PATCH 5/9] drivers/usb/host/isp1760-if.c: introduce missing kfree   Julia Lawall
• [PATCH 8/9] arch/powerpc/sysdev/fsl_rmu.c: introduce missing kfree   Julia Lawall
• [PATCH] serial/efm32: add new driver   Uwe Kleine-König
• [PATCH v4 4/7] cpufreq: add clk-reg cpufreq driver   Richard Zhao
• [PATCH v4 4/7] cpufreq: add clk-reg cpufreq driver   Mark Brown
• [PATCH v4 4/7] cpufreq: add clk-reg cpufreq driver   Jamie Iles
• [PATCH v4 4/7] cpufreq: add clk-reg cpufreq driver   Richard Zhao
• [PATCH v4 4/7] cpufreq: add clk-reg cpufreq driver   Richard Zhao
• [PATCH v4 4/7] cpufreq: add clk-reg cpufreq driver   Mark Brown
• [PATCH v4 4/7] cpufreq: add clk-reg cpufreq driver   Richard Zhao
• [PATCH v2] gpio: pl061: convert to use generic irq chip   Linus Walleij
• [RFC PATCH v3 2/5] pinctrl: add dt binding support for pinmux mappings   Stephen Warren
• [PATCH v2 04/10] rtc: rtc-twl: Add DT support for RTC inside twl4030/twl6030   Alessandro Zummo
• [PATCH v4 4/7] cpufreq: add clk-reg cpufreq driver   Mark Brown
• [PATCH 1/2] PM / Domains: Add OF support   Mark Brown
• [PATCH v4 4/7] cpufreq: add clk-reg cpufreq driver   Richard Zhao
• [PATCH v4 4/7] cpufreq: add clk-reg cpufreq driver   Mark Brown
• [PATCH 2/2] ARM: Exynos: Hook up power domains to generic power domain infrastructure   Mark Brown
• [PATCH 1/2] PM / Domains: Add OF support   Rafael J. Wysocki
• [PATCH 1/2] PM / Domains: Add OF support   Mark Brown
• [PATCH 1/2] PM / Domains: Add OF support   Rafael J. Wysocki
• [PATCH 1/2] mt_ventoux: very basic support for TeeJet Mt.Ventoux board   Ilya Yanok
• [PATCH 0/2] Support for TeeJet Mt.Ventoux   Ilya Yanok
• [PATCH 2/2] mt_ventoux: support for TeeJet Mt.Ventoux board   Ilya Yanok
• [PATCH v4 4/7] cpufreq: add clk-reg cpufreq driver   Richard Zhao
• [PATCH 2/2] mt_ventoux: support for TeeJet Mt.Ventoux board   Igor Grinberg
• [PATCH V5 1/7] ARM: add cpufreq transiton notifier to adjust loops_per_jiffy for smp   Richard Zhao
• [PATCH V5 2/7] arm/imx: cpufreq: remove loops_per_jiffy recalculate for smp   Richard Zhao
• [PATCH V5 3/7] cpufreq: OMAP: remove loops_per_jiffy recalculate for smp   Richard Zhao
• [PATCH V5 0/7] add a generic cpufreq driver   Richard Zhao
• [PATCH V5 5/7] dts/imx6q: add cpufreq property   Richard Zhao
• [PATCH V5 4/7] cpufreq: add clk-reg cpufreq driver   Richard Zhao
• [PATCH V5 6/7] arm/imx6q: register arm_clk as cpu to clkdev   Richard Zhao
• [PATCH V5 7/7] arm/imx6q: select ARCH_HAS_CPUFREQ   Richard Zhao
• [PATCH v4 4/7] cpufreq: add clk-reg cpufreq driver   Mark Brown
• [PATCH v3] gianfar: add support for wake-on-packet   Zhao Chenhui
• [PATCH 1/6] drivers/gpio/gpio-tegra.c: use devm_request_and_ioremap   Julia Lawall
• [PATCH 3/6] drivers/watchdog/imx2_wdt.c: use devm_request_and_ioremap   Julia Lawall
• [RFC PATCH v3 2/5] pinctrl: add dt binding support for pinmux mappings   Dong Aisheng-B29396
• [PATCH V5 4/7] cpufreq: add clk-reg cpufreq driver   Shawn Guo
• [PATCH] Input: mpu3050: add of_match table for device-tree probing   Rob Herring
• [PATCH] Input: mpu3050: add of_match table for device-tree probing   Olof Johansson
• [PATCH] dt/i2c: Enumerate some of the known trivial i2c devices   Olof Johansson
• [PATCH] ARM/of: allow *machine_desc.dt_compat to be const   Rob Herring
• [PATCH] dt/i2c: Enumerate some of the known trivial i2c devices   Rob Herring
• [PATCH] of/pdt: fix section mismatch warning   Sam Ravnborg
• [PATCH] of/pdt: fix section mismatch warning   David Miller
• [PATCH 2/2] ARM: Exynos: Hook up power domains to generic power domain infrastructure   Sylwester Nawrocki
• [PATCH] of/pdt: fix section mismatch warning   Sam Ravnborg
• [PATCH] of/pdt: fix section mismatch warning   David Miller
• [PATCH] of/pdt: fix section mismatch warning   Rob Herring
• [PATCH] of/pdt: fix section mismatch warning   David Miller
• [PATCH] of/pdt: fix section mismatch warning   Sam Ravnborg
• [PATCH V2] mt_ventoux: support for TeeJet Mt.Ventoux board   Ilya Yanok
• [PATCH 2/2] ARM: Exynos: Hook up power domains to generic power domain infrastructure   Sylwester Nawrocki
• [PATCH 2/2] mt_ventoux: support for TeeJet Mt.Ventoux board   Ilya Yanok
• [PATCH V5 4/7] cpufreq: add clk-reg cpufreq driver   Richard Zhao
• [PATCH V5 4/7] cpufreq: add clk-reg cpufreq driver   Shawn Guo
• [PATCH V5 4/7] cpufreq: add clk-reg cpufreq driver   Richard Zhao
• [PATCH V5 4/7] cpufreq: add clk-reg cpufreq driver   Shawn Guo
• [PATCH V5 4/7] cpufreq: add clk-reg cpufreq driver   Richard Zhao
• [PATCH 1/2] PM / Domains: Add OF support   Thomas Abraham
• [PATCH 0/2] Input: tegra-kbc - configure through device tree   Olof Johansson
• [PATCH 1/2] Input: tegra-kbc - add device tree bindings   Olof Johansson
• [PATCH 2/2] Input: tegra-kbc - add default chromeos map   Olof Johansson
• [PATCH 2/2] Input: tegra-kbc - add default chromeos map   Olof Johansson
• [PATCH 2/2] ARM: Exynos: Hook up power domains to generic power domain infrastructure   Thomas Abraham
• [PATCH v2 0/2] Input: tegra-kbc - configure through device tree   Olof Johansson
• [PATCH v2 1/2] Input: tegra-kbc - add device tree bindings   Olof Johansson
• [PATCH v2 2/2] Input: tegra-kbc - add default chromeos map   Olof Johansson
• [PATCH v2 1/2] Input: tegra-kbc - add device tree bindings   Dmitry Torokhov
• [PATCH v2 2/2] Input: tegra-kbc - add default chromeos map   Dmitry Torokhov
• [PATCH v2 1/2] Input: tegra-kbc - add device tree bindings   Olof Johansson
• [PATCH v5 2/2] input: samsung-keypad: Add device tree support   Olof Johansson
• [PATCH v2 2/2] Input: tegra-kbc - add default chromeos map   Olof Johansson
• [PATCH 2/2] ARM: Exynos: Hook up power domains to generic power domain infrastructure   Sylwester Nawrocki
• [PATCH V5 4/7] cpufreq: add clk-reg cpufreq driver   Mark Brown
• [PATCH V5 4/7] cpufreq: add clk-reg cpufreq driver   Richard Zhao
• [PATCH V5 4/7] cpufreq: add clk-reg cpufreq driver   Mark Brown
• [PATCH V5 4/7] cpufreq: add clk-reg cpufreq driver   Richard Zhao
• [PATCH V5 4/7] cpufreq: add clk-reg cpufreq driver   Mark Brown
• [PATCH V5 4/7] cpufreq: add clk-reg cpufreq driver   Mark Brown
• [PATCH V5 4/7] cpufreq: add clk-reg cpufreq driver   Shawn Guo
• [PATCH V5 4/7] cpufreq: add clk-reg cpufreq driver   Shawn Guo
• [PULL] Devicetree for 3.3   Rob Herring
• [PATCH 2/2] ARM: Exynos: Hook up power domains to generic power domain infrastructure   Sylwester Nawrocki
• [PATCH 1/2] PM / Domains: Add OF support   Rafael J. Wysocki
• [PATCH] Input: keyboard - add device tree bindings for simple key matrixes   Olof Johansson
• [PATCH] Input: keyboard - add device tree bindings for simple key matrixes   Rob Herring
• [PATCH] Input: keyboard - add device tree bindings for simple key matrixes   Olof Johansson
• [RFC PATCH v3 2/5] pinctrl: add dt binding support for pinmux mappings   Shawn Guo
• [PULL] Devicetree for 3.3   Grant Likely
• [PATCH v2 1/2] Input: tegra-kbc - add device tree bindings   Stephen Warren
• [PATCH v2 2/2] Input: tegra-kbc - add default chromeos map   Stephen Warren
• [PATCH] Input: keyboard - add device tree bindings for simple key matrixes   Stephen Warren
• [PATCH V5 4/7] cpufreq: add clk-reg cpufreq driver   Richard Zhao
• [PATCH] Input: keyboard - add device tree bindings for simple key matrixes   Olof Johansson
• [PATCH v2 2/2] Input: tegra-kbc - add default chromeos map   Olof Johansson
• [PATCH v2 2/2] Input: tegra-kbc - add default chromeos map   Stephen Warren
• [PATCH] Input: keyboard - add device tree bindings for simple key matrixes   Stephen Warren
• [PATCH] Input: keyboard - add device tree bindings for simple key matrixes   Olof Johansson
• [PATCH v2 2/2] Input: tegra-kbc - add default chromeos map   Olof Johansson
• [PATCH V5 4/7] cpufreq: add clk-reg cpufreq driver   Shawn Guo
• [PATCH v2 1/2] Input: tegra-kbc - add device tree bindings   Dmitry Torokhov
• [PATCH 1/4] block: xsysace: Don't use NO_IRQ   Michal Simek
• [PATCH v2 2/2] Input: tegra-kbc - add default chromeos map   Dmitry Torokhov
• [PATCH v2 2/2] Input: tegra-kbc - add default chromeos map   Olof Johansson
• [PATCH v2] Input: keyboard - add device tree bindings for simple key matrixes   Olof Johansson
• [PATCH] Input: keyboard - add device tree bindings for simple key matrixes   Rob Herring
• [PATCH v2] Input: keyboard - add device tree bindings for simple key matrixes   Rob Herring
• [PATCH v2] Input: keyboard - add device tree bindings for simple key matrixes   Olof Johansson
• [PATCH v2] Input: keyboard - add device tree bindings for simple key matrixes   Dmitry Torokhov
• [PATCH v2] Input: keyboard - add device tree bindings for simple key matrixes   Olof Johansson
• [PATCH V6 0/7] add a generic cpufreq driver   Richard Zhao
• [PATCH V6 1/7] ARM: add cpufreq transiton notifier to adjust loops_per_jiffy for smp   Richard Zhao
• [PATCH V6 2/7] arm/imx: cpufreq: remove loops_per_jiffy recalculate for smp   Richard Zhao
• [PATCH V6 3/7] cpufreq: OMAP: remove loops_per_jiffy recalculate for smp   Richard Zhao
• [PATCH V6 4/7] cpufreq: add clk-reg cpufreq driver   Richard Zhao
• [PATCH V6 5/7] dts/imx6q: add cpufreq property   Richard Zhao
• [PATCH V6 6/7] arm/imx6q: register arm_clk as cpu to clkdev   Richard Zhao
• [PATCH V6 7/7] arm/imx6q: select ARCH_HAS_CPUFREQ   Richard Zhao
• [PATCH 4/4] arm/imx: add mc13892 support into imx51-babbage.dts   Richard Zhao
• [PATCH] x86: convert to generic irq_domain   Rob Herring
• [PATCH v2 0/4] irq/of: Cleanup and Enchance irq_domain support.   Rob Herring
• [PATCH v2 0/4] irq/of: Cleanup and Enchance irq_domain support.   Grant Likely
• [PATCHv2 1/2] gpio: add a driver for the Synopsys DesignWare APB GPIO block   Jamie Iles
• [PATCH] irqdomain: include linux/bug.h for WARN_ON()   Jamie Iles
• [PATCH] irqdomain: include linux/bug.h for WARN_ON()   Rob Herring
• [PATCHv2 1/2] gpio: add a driver for the Synopsys DesignWare APB GPIO block   Rob Herring
• [PATCHv2 1/2] gpio: add a driver for the Synopsys DesignWare APB GPIO block   Jamie Iles

Last message date: Sat Dec 31 12:03:46 EST 2011
Archived on: Fri Jan 13 05:45:22 EST 2012

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...