[PATCH v3 4/4] ARM: omap: pass minimal SoC/board data for UART from dt

[Cousson, Benoit]

On 12/15/2011 10:13 PM, Tony Lindgren wrote:
> * Cousson, Benoit<b-cousson at ti.com>  [111215 01:34]:
>> Hi Tony,
>>
>> On 12/15/2011 7:52 AM, Rajendra Nayak wrote:
>>> On Thursday 15 December 2011 12:55 AM, Tony Lindgren wrote:
>>>> * Rajendra Nayak<rnayak at ti.com>  [111214 03:24]:
>>>>> Pass minimal data needed for console boot, from dt, for
>>>>> OMAP4 panda/sdp and OMAP3 beagle boards, and get rid of the
>>>>> static initialization from generic board file.
>>>>>
>>>>> Acked-by: Rob Herring<rob.herring at calxeda.com>
>>>>> Signed-off-by: Rajendra Nayak<rnayak at ti.com>
>>>>
>>>> This we can't merge because this breaks serial console for
>>>> omap2 because you're not adding the omap2 specific dtsi
>>>> entries for omap2..
>>>
>>> But we never had omap2 working with DT, because we never added
>>> a .dtsi file for omap2 or a .dts file for any omap2 board variants.
>>>
>>> Until now the DT support on OMAP has been limited to OMAP3 and OMAP4
>>> with boards limited to omap3beagle/omap4Panda and omap4sdp.
>>>
>>> So when we do add base support for omap2, we could update those
>>> with the serial entries.
>>
>> I'm quite confused as well... Have you tried the current 3.2 kernel
>> on an OMAP2 board?
>>
>> So far I've been taking care of keeping the OMAP2 support into the
>> board-generic.c file, but I've never added any omap2.dtsi or
>> omap2-board.dts file to support it.
>
> Yeah adding it is trivial, so let's just add it :)

Well, why not :-)

> How about we just add the following patch before the last patch
> in this series?
>
> I don't have iva there as that's different between 2420 and 2430.
> But omap2.dtsi can be included later on into omap2420.dtsi and
> omap2430.dtsi.
>
> Regards,
>
> Tony
>
>
> From: Tony Lindgren<tony at atomide.com>
> Date: Thu, 15 Dec 2011 12:48:43 -0800
> Subject: [PATCH] arm/dts: Add minimal device tree support for omap2420 and omap2430
>
> Add minimal device tree support for omap2420 and omap2430
>
> Signed-off-by: Tony Lindgren<tony at atomide.com>
>
> --- /dev/null
> +++ b/arch/arm/boot/dts/omap2.dtsi
> @@ -0,0 +1,67 @@
> +/*
> + * Device Tree Source for OMAP2 SoC
> + *
> + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
> + *
> + * This file is licensed under the terms of the GNU General Public License
> + * version 2.  This program is licensed "as is" without any warranty of any
> + * kind, whether express or implied.
> + */
> +
> +/include/ "skeleton.dtsi"
> +
> +/ {
> +	compatible = "ti,omap2430", "ti,omap2420", "ti,omap2";
> +
> +	aliases {
> +		serial0 =&uart1;
> +		serial1 =&uart2;
> +		serial2 =&uart3;
> +	};
> +
> +	cpus {
> +		cpu at 0 {
> +			compatible = "arm,arm1136jf-s";
> +		};
> +	};
> +
> +	soc {
> +		compatible = "ti,omap-infra";
> +		mpu {
> +			compatible = "ti,omap2-mpu";
> +			ti,hwmods = "mpu";
> +		};
> +	};
> +
> +	ocp {
> +		compatible = "simple-bus";
> +		#address-cells =<1>;
> +		#size-cells =<1>;
> +		ranges;
> +		ti,hwmods = "l3_main";
> +
> +		intc: interrupt-controller at 1 {
> +			compatible = "ti,omap2-intc";
> +			interrupt-controller;
> +			#interrupt-cells =<1>;
> +		};
> +
> +		uart1: serial at 0x4806a000 {

Nit: The convention is without the 0x prefix.

Beside that, that looks good top me. But I'll not be able to try it :-)

Regards,
Benoit