[PATCHv2 1/2] gpio: add a driver for the Synopsys DesignWare APB GPIO block

Rob Herring robherring2 at gmail.com
Wed Dec 21 02:44:42 EST 2011


Jamie,

On 12/19/2011 07:43 PM, Jamie Iles wrote:
> The Synopsys DesignWare block is used in some ARM devices (picoxcell)
> and can be configured to provide multiple banks of GPIO pins.  The first
> bank (A) can also provide IRQ capabilities.
> 
> v2:	- use Rob Herring's irqdomain in generic irq chip patches
> 	- use reg property to indicate bank index
> 	- support irqs on both edges based on LinusW's u300 driver
> 
> Cc: Grant Likely <grant.likely at secretlab.ca>
> Cc: Linus Walleij <linus.walleij at stericsson.com>
> Cc: Rob Herring <rob.herring at calxeda.com>
> Signed-off-by: Jamie Iles <jamie at jamieiles.com>
> ---
> 
> Rob, I've based this on your generic irq chip + irq domain support but I
> don't have the original mail in my inbox to reply to with a Tested-by,
> 	but feel free to add a:
> 
> 	Tested-by: Jamie Iles <jamie at jamieiles.com>
> 
> to "irq: convert generic-chip to use irq_domain" if you like.
> 
>  .../devicetree/bindings/gpio/snps-dwapb-gpio.txt   |   63 ++++
>  drivers/gpio/Kconfig                               |   10 +
>  drivers/gpio/Makefile                              |    1 +
>  drivers/gpio/gpio-dwapb.c                          |  351 ++++++++++++++++++++
>  4 files changed, 425 insertions(+), 0 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt
>  create mode 100644 drivers/gpio/gpio-dwapb.c
> 
> diff --git a/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt b/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt
> new file mode 100644
> index 0000000..7ef694bb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt
> @@ -0,0 +1,63 @@
> +* Synopsys DesignWare APB GPIO controller
> +
> +Required properties:
> +- compatible : Should be "snps,dw-apb-gpio"
> +- reg : Address and length of the register set for the device
> +
> +The GPIO controller has a configurable number of banks, each of which are
> +represented as child nodes with the following properties:
> +
> +Required properties:
> +- compatible : "snps,dw-apb-gpio-bank"
> +- gpio-controller : Marks the device node as a gpio controller.
> +- #gpio-cells : Should be two.  The first cell is the pin number and
> +  the second cell is used to specify optional parameters (currently
> +  unused).
> +- reg : The integer bank index of the bank, a single cell.
> +- nr-gpio : The number of pins in the bank, a single cell.
> +
> +Optional properties:
> +- interrupt-controller : The first bank may be configured to be an interrupt
> +controller.
> +- #interrupt-cells : Specifies the number of cells needed to encode an
> +interrupt.  Shall be set to 2.  The first cell defines the interrupt number,
> +the second encodes the triger flags encoded as:
> +
> +	bits[3:0] trigger type and level flags.
> +		1 = low-to-high edge triggered
> +		2 = high-to-low edge triggered
> +		4 = active high level-sensitive
> +		8 = active low level-sensitive
> +
> +- interrupt-parent : The parent interrupt controller.
> +- interrupts : The interrupts to the parent controller raised when GPIOs
> +generate the interrupts.
> +
> +Example:
> +
> +gpio: gpio at 20000 {
> +	compatible = "snps,dw-apb-gpio";
> +	reg = <0x20000 0x1000>;
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	banka: gpio-controller at 0 {
> +		compatible = "snps,dw-apb-gpio-bank";
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		nr-gpio = <8>;
> +		reg = <0>;

Actually, what I meant was to use the bank addresses here. Sorry that
wasn't clear. Then you don't need a calculation of bank offsets.

There is the problem of creating multiple mappings since it is all
within a 4KB page. Ideally, ioremap would be smart enough to reuse
existing mappings. It does for static mappings now, but not dynamic ones
AFAIK. I'm not sure how to best deal with this in DT, but it's a fairly
common issue. I see a couple of options:

- Make reg for the bank be the absolute address (or relative to the bus
ranges) and remove the top level reg property.
- Make reg for the bank just be the offset from the gpio base and keep
the top level reg property.

The latter would be easier to create a single mapping.

Rob

> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +		interrupt-parent = <&vic1>;
> +		interrupts = <0 1 2 3 4 5 6 7>;
> +	};
> +
> +	bankb: gpio-controller at 1 {
> +		compatible = "snps,dw-apb-gpio-bank";
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		nr-gpio = <8>;
> +		reg = <1>;
> +	};
> +};
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index 8482a23..61c16f3 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -85,6 +85,16 @@ config GPIO_GENERIC_PLATFORM
>  	help
>  	  Say yes here to support basic platform_device memory-mapped GPIO controllers.
>  
> +config GPIO_DWAPB
> +	bool "Synopsys DesignWare APB GPIO driver"
> +	select GPIO_GENERIC
> +	select GENERIC_IRQ_CHIP
> +	select IRQ_DOMAIN
> +	depends on OF_GPIO
> +	help
> +	  Say Y or M here to build support for the Synopsys DesignWare APB
> +	  GPIO block.  This requires device tree support.
> +
>  config GPIO_IT8761E
>  	tristate "IT8761E GPIO support"
>  	help
> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> index dbcb0bc..22665a0 100644
> --- a/drivers/gpio/Makefile
> +++ b/drivers/gpio/Makefile
> @@ -15,6 +15,7 @@ obj-$(CONFIG_GPIO_BT8XX)	+= gpio-bt8xx.o
>  obj-$(CONFIG_GPIO_CS5535)	+= gpio-cs5535.o
>  obj-$(CONFIG_GPIO_DA9052)	+= gpio-da9052.o
>  obj-$(CONFIG_ARCH_DAVINCI)	+= gpio-davinci.o
> +obj-$(CONFIG_GPIO_DWAPB)	+= gpio-dwapb.o
>  obj-$(CONFIG_GPIO_EP93XX)	+= gpio-ep93xx.o
>  obj-$(CONFIG_GPIO_IT8761E)	+= gpio-it8761e.o
>  obj-$(CONFIG_GPIO_JANZ_TTL)	+= gpio-janz-ttl.o
> diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c
> new file mode 100644
> index 0000000..dae263c
> --- /dev/null
> +++ b/drivers/gpio/gpio-dwapb.c
> @@ -0,0 +1,351 @@
> +/*
> + * Copyright (c) 2011 Jamie Iles
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * All enquiries to support at picochip.com
> + */
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/ioport.h>
> +#include <linux/irq.h>
> +#include <linux/irqdomain.h>
> +#include <linux/module.h>
> +#include <linux/basic_mmio_gpio.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/platform_device.h>
> +
> +#define INT_EN_REG_OFFS		0x30
> +#define INT_MASK_REG_OFFS	0x34
> +#define INT_TYPE_REG_OFFS	0x38
> +#define INT_POLARITY_REG_OFFS	0x3c
> +#define INT_STATUS_REG_OFFS	0x40
> +#define EOI_REG_OFFS		0x4c
> +
> +struct dwapb_gpio;
> +
> +struct dwapb_gpio_bank {
> +	struct bgpio_chip	bgc;
> +	unsigned int		bank_idx;
> +	bool			is_registered;
> +	struct dwapb_gpio	*gpio;
> +};
> +
> +struct dwapb_gpio {
> +	struct device_node	*of_node;
> +	struct	device		*dev;
> +	void __iomem		*regs;
> +	struct dwapb_gpio_bank	*banks;
> +	unsigned int		nr_banks;
> +	struct irq_chip_generic	*irq_gc;
> +	unsigned long		toggle_edge;
> +};
> +
> +static unsigned int dwapb_gpio_nr_banks(struct device_node *of_node)
> +{
> +	unsigned int nr_banks = 0;
> +	struct device_node *np;
> +
> +	for_each_child_of_node(of_node, np)
> +		++nr_banks;
> +
> +	return nr_banks;
> +}
> +
> +static int dwapb_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
> +{
> +	struct bgpio_chip *bgc = to_bgpio_chip(gc);
> +	struct dwapb_gpio_bank *bank = container_of(bgc, struct
> +						    dwapb_gpio_bank, bgc);
> +	struct dwapb_gpio *gpio = bank->gpio;
> +
> +	return irq_domain_to_irq(&gpio->irq_gc->domain, offset);
> +}
> +
> +static void dwapb_toggle_trigger(struct dwapb_gpio *gpio, unsigned int offs)
> +{
> +	u32 v = readl(gpio->regs + INT_TYPE_REG_OFFS);
> +
> +	if (gpio_get_value(gpio->banks[0].bgc.gc.base + offs))
> +		v &= ~BIT(offs);
> +	else
> +		v |= BIT(offs);
> +
> +	writel(v, gpio->regs + INT_TYPE_REG_OFFS);
> +}
> +
> +static void dwapb_irq_handler(u32 irq, struct irq_desc *desc)
> +{
> +	struct dwapb_gpio *gpio = irq_get_handler_data(irq);
> +	u32 irq_status = readl(gpio->regs + INT_STATUS_REG_OFFS);
> +
> +	while (irq_status) {
> +		int irqoffset = fls(irq_status) - 1;
> +		int irq = irq_domain_to_irq(&gpio->irq_gc->domain, irqoffset);
> +
> +		generic_handle_irq(irq);
> +		irq_status &= ~(1 << irqoffset);
> +
> +		if (gpio->toggle_edge & BIT(irqoffset))
> +			dwapb_toggle_trigger(gpio, irqoffset);
> +	}
> +}
> +
> +static void dwapb_irq_enable(struct irq_data *d)
> +{
> +	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
> +	struct dwapb_gpio *gpio = gc->private;
> +
> +	u32 val = readl(gpio->regs + INT_EN_REG_OFFS);
> +	val |= 1 << d->hwirq;
> +	writel(val, gpio->regs + INT_EN_REG_OFFS);
> +}
> +
> +static void dwapb_irq_disable(struct irq_data *d)
> +{
> +	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
> +	struct dwapb_gpio *gpio = gc->private;
> +
> +	u32 val = readl(gpio->regs + INT_EN_REG_OFFS);
> +	val &= ~(1 << d->hwirq);
> +	writel(val, gpio->regs + INT_EN_REG_OFFS);
> +}
> +
> +static int dwapb_irq_set_type(struct irq_data *d, u32 type)
> +{
> +	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
> +	struct dwapb_gpio *gpio = gc->private;
> +	int bit = d->hwirq;
> +	unsigned long level, polarity;
> +
> +	if (type & ~(IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING |
> +		     IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
> +		return -EINVAL;
> +
> +	level = readl(gpio->regs + INT_TYPE_REG_OFFS);
> +	polarity = readl(gpio->regs + INT_POLARITY_REG_OFFS);
> +
> +	gpio->toggle_edge &= ~BIT(bit);
> +	if (type & IRQ_TYPE_EDGE_BOTH) {
> +		gpio->toggle_edge |= BIT(bit);
> +		level |= (1 << bit);
> +		dwapb_toggle_trigger(gpio, bit);
> +	} else if (type & IRQ_TYPE_EDGE_RISING) {
> +		level |= (1 << bit);
> +		polarity |= (1 << bit);
> +	} else if (type & IRQ_TYPE_EDGE_FALLING) {
> +		level |= (1 << bit);
> +		polarity &= ~(1 << bit);
> +	} else if (type & IRQ_TYPE_LEVEL_HIGH) {
> +		level &= ~(1 << bit);
> +		polarity |= (1 << bit);
> +	} else if (type & IRQ_TYPE_LEVEL_LOW) {
> +		level &= ~(1 << bit);
> +		polarity &= ~(1 << bit);
> +	}
> +
> +	writel(level, gpio->regs + INT_TYPE_REG_OFFS);
> +	writel(polarity, gpio->regs + INT_POLARITY_REG_OFFS);
> +
> +	return 0;
> +}
> +
> +static int dwapb_create_irqchip(struct dwapb_gpio *gpio,
> +				struct dwapb_gpio_bank *bank,
> +				unsigned int irq_base)
> +{
> +	struct irq_chip_type *ct;
> +
> +	gpio->irq_gc = irq_alloc_generic_chip("gpio-dwapb", 1, irq_base,
> +					      gpio->regs, handle_level_irq);
> +	if (!gpio->irq_gc)
> +		return -EIO;
> +
> +	gpio->irq_gc->domain.of_node = of_node_get(bank->bgc.gc.of_node);
> +	gpio->irq_gc->private = gpio;
> +	ct = gpio->irq_gc->chip_types;
> +	ct->chip.irq_ack = irq_gc_ack_set_bit;
> +	ct->chip.irq_mask = irq_gc_mask_set_bit;
> +	ct->chip.irq_unmask = irq_gc_mask_clr_bit;
> +	ct->chip.irq_set_type = dwapb_irq_set_type;
> +	ct->chip.irq_enable = dwapb_irq_enable;
> +	ct->chip.irq_disable = dwapb_irq_disable;
> +	ct->regs.ack = EOI_REG_OFFS;
> +	ct->regs.mask = INT_MASK_REG_OFFS;
> +	irq_setup_generic_chip(gpio->irq_gc, IRQ_MSK(bank->bgc.gc.ngpio),
> +			       IRQ_GC_INIT_NESTED_LOCK, IRQ_NOREQUEST, 0);
> +
> +	return 0;
> +}
> +
> +static int dwapb_configure_irqs(struct dwapb_gpio *gpio,
> +				struct dwapb_gpio_bank *bank)
> +{
> +	unsigned int m, irq, ngpio = bank->bgc.gc.ngpio;
> +	int irq_base;
> +
> +	for (m = 0; m < ngpio; ++m) {
> +		irq = irq_of_parse_and_map(bank->bgc.gc.of_node, m);
> +		if (!irq && m == 0) {
> +			dev_warn(gpio->dev, "no irq for bank %s\n",
> +				 bank->bgc.gc.of_node->full_name);
> +			return -ENXIO;
> +		} else if (!irq) {
> +			break;
> +		}
> +
> +		irq_set_chained_handler(irq, dwapb_irq_handler);
> +		irq_set_handler_data(irq, gpio);
> +	}
> +	bank->bgc.gc.to_irq = dwapb_gpio_to_irq;
> +
> +	irq_base = irq_alloc_descs(-1, 0, ngpio, NUMA_NO_NODE);
> +	if (irq_base < 0)
> +		return irq_base;
> +
> +	if (dwapb_create_irqchip(gpio, bank, irq_base))
> +		goto out_free_descs;
> +
> +	return 0;
> +
> +out_free_descs:
> +	irq_free_descs(irq_base, ngpio);
> +
> +	return -EIO;
> +}
> +
> +static int dwapb_gpio_add_bank(struct dwapb_gpio *gpio,
> +			       struct device_node *bank_np)
> +{
> +	struct dwapb_gpio_bank *bank;
> +	u32 bank_idx, ngpio;
> +	int err;
> +
> +	if (of_property_read_u32(bank_np, "reg", &bank_idx)) {
> +		dev_err(gpio->dev, "invalid bank index for %s\n",
> +			bank_np->full_name);
> +		return -EINVAL;
> +	}
> +	bank = &gpio->banks[bank_idx];
> +	bank->gpio = gpio;
> +
> +	if (of_property_read_u32(bank_np, "nr-gpio", &ngpio)) {
> +		dev_err(gpio->dev, "failed to get number of gpios for %s\n",
> +			bank_np->full_name);
> +		return -EINVAL;
> +	}
> +
> +	bank->bank_idx = bank_idx;
> +	err = bgpio_init(&bank->bgc, gpio->dev, 4,
> +			 gpio->regs + 0x50 + (bank_idx * 0x4),
> +			 gpio->regs + 0x00 + (bank_idx * 0xc),
> +			 NULL, gpio->regs + 0x04 + (bank_idx * 0xc), NULL,
> +			 false);
> +	if (err) {
> +		dev_err(gpio->dev, "failed to init gpio chip for %s\n",
> +			bank_np->full_name);
> +		return err;
> +	}
> +
> +	bank->bgc.gc.ngpio = ngpio;
> +	bank->bgc.gc.of_node = bank_np;
> +
> +	/*
> +	 * Only bank A can provide interrupts in all configurations of the IP.
> +	 */
> +	if (bank_idx == 0 &&
> +	    of_get_property(bank_np, "interrupt-controller", NULL))
> +		dwapb_configure_irqs(gpio, bank);
> +
> +	err = gpiochip_add(&bank->bgc.gc);
> +	if (err)
> +		dev_err(gpio->dev, "failed to register gpiochip for %s\n",
> +			bank_np->full_name);
> +	else
> +		bank->is_registered = true;
> +
> +	return err;
> +}
> +
> +static void dwapb_gpio_unregister(struct dwapb_gpio *gpio)
> +{
> +	unsigned int m;
> +
> +	for (m = 0; m < gpio->nr_banks; ++m)
> +		if (gpio->banks[m].is_registered)
> +			gpiochip_remove(&gpio->banks[m].bgc.gc);
> +	of_node_put(gpio->of_node);
> +}
> +
> +static int __devinit dwapb_gpio_probe(struct platform_device *pdev)
> +{
> +	struct resource *res;
> +	struct dwapb_gpio *gpio;
> +	struct device_node *np;
> +	int err;
> +
> +	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
> +	if (!gpio)
> +		return -ENOMEM;
> +	gpio->dev = &pdev->dev;
> +
> +	gpio->nr_banks = dwapb_gpio_nr_banks(pdev->dev.of_node);
> +	if (!gpio->nr_banks)
> +		return -EINVAL;
> +	gpio->banks = devm_kzalloc(&pdev->dev, gpio->nr_banks *
> +				   sizeof(*gpio->banks), GFP_KERNEL);
> +	if (!gpio->banks)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	if (!res) {
> +		dev_err(&pdev->dev, "failed to get iomem\n");
> +		return -ENXIO;
> +	}
> +	gpio->regs = devm_ioremap(&pdev->dev, res->start, resource_size(res));
> +	if (!gpio->regs)
> +		return -ENOMEM;
> +
> +	gpio->of_node = of_node_get(pdev->dev.of_node);
> +	for_each_child_of_node(pdev->dev.of_node, np) {
> +		err = dwapb_gpio_add_bank(gpio, np);
> +		if (err)
> +			goto out_unregister;
> +	}
> +	platform_set_drvdata(pdev, gpio);
> +
> +	return 0;
> +
> +out_unregister:
> +	dwapb_gpio_unregister(gpio);
> +
> +	return err;
> +}
> +
> +static const struct of_device_id dwapb_of_match_table[] = {
> +	{ .compatible = "snps,dw-apb-gpio" },
> +	{ /* Sentinel */ }
> +};
> +
> +static struct platform_driver dwapb_gpio_driver = {
> +	.driver		= {
> +		.name	= "gpio-dwapb",
> +		.owner	= THIS_MODULE,
> +		.of_match_table = dwapb_of_match_table,
> +	},
> +	.probe		= dwapb_gpio_probe,
> +};
> +
> +static int __init dwapb_gpio_init(void)
> +{
> +	return platform_driver_register(&dwapb_gpio_driver);
> +}
> +postcore_initcall(dwapb_gpio_init);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Jamie Iles");
> +MODULE_DESCRIPTION("Synopsys DesignWare APB GPIO driver");


More information about the devicetree-discuss mailing list