[PATCH v2 2/5] ASoC: WM8903: Create default platform data structure
Stephen Warren
swarren at nvidia.com
Sat Dec 3 09:08:38 EST 2011
When no platform data is supplied, point pdata at a default platform
structure. This enables two future changes:
a) Defines the default platform data values in a single place.
b) There is always a valid pdata pointer, so some conditional code can
be simplified by a later patch.
Based on work by John Bonesio, but significantly reworked since then.
Signed-off-by: Stephen Warren <swarren at nvidia.com>
---
sound/soc/codecs/wm8903.c | 19 +++++++++++++++++--
1 files changed, 17 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c
index 3070a94..9fd89be 100644
--- a/sound/soc/codecs/wm8903.c
+++ b/sound/soc/codecs/wm8903.c
@@ -114,6 +114,7 @@ static const struct reg_default wm8903_reg_defaults[] = {
};
struct wm8903_priv {
+ struct wm8903_platform_data *pdata;
struct snd_soc_codec *codec;
struct regmap *regmap;
@@ -1834,7 +1835,7 @@ static struct gpio_chip wm8903_template_chip = {
static void wm8903_init_gpio(struct snd_soc_codec *codec)
{
struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
- struct wm8903_platform_data *pdata = dev_get_platdata(codec->dev);
+ struct wm8903_platform_data *pdata = wm8903->pdata;
int ret;
wm8903->gpio_chip = wm8903_template_chip;
@@ -1872,8 +1873,8 @@ static void wm8903_free_gpio(struct snd_soc_codec *codec)
static int wm8903_probe(struct snd_soc_codec *codec)
{
- struct wm8903_platform_data *pdata = dev_get_platdata(codec->dev);
struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
+ struct wm8903_platform_data *pdata = wm8903->pdata;
int ret, i;
int trigger, irq_pol;
u16 val;
@@ -2040,6 +2041,7 @@ static const struct regmap_config wm8903_regmap = {
static __devinit int wm8903_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
+ struct wm8903_platform_data *pdata = dev_get_platdata(&i2c->dev);
struct wm8903_priv *wm8903;
unsigned int val;
int ret;
@@ -2060,6 +2062,19 @@ static __devinit int wm8903_i2c_probe(struct i2c_client *i2c,
i2c_set_clientdata(i2c, wm8903);
wm8903->irq = i2c->irq;
+ /* If no platform data was supplied, create storage for defaults */
+ if (pdata) {
+ wm8903->pdata = pdata;
+ } else {
+ wm8903->pdata = devm_kzalloc(&i2c->dev,
+ sizeof(struct wm8903_platform_data),
+ GFP_KERNEL);
+ if (wm8903->pdata == NULL) {
+ dev_err(&i2c->dev, "Failed to allocate pdata\n");
+ return -ENOMEM;
+ }
+ }
+
ret = regmap_read(wm8903->regmap, WM8903_SW_RESET_AND_ID, &val);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to read chip ID: %d\n", ret);
--
1.7.0.4
More information about the devicetree-discuss
mailing list