[PATCH] drivers, char: add U-Boot bootcount driver

[Paul Bolle]

Heiko,

Some minor comments follow. These should touch things not yet covered by
Matthias Kaehlcke or Wolfram Sang.

On Sun, 2011-12-04 at 10:45 +0100, Heiko Schocher wrote:
>[...]
> diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
> index 4364303..9c5ccab 100644
> --- a/drivers/char/Kconfig
> +++ b/drivers/char/Kconfig
> @@ -577,6 +577,13 @@ config UV_MMTIMER
>  	  The uv_mmtimer device allows direct userspace access to the
>  	  UV system timer.
>  
> +config BOOTCOUNT
> +	tristate "U-Boot Bootcount driver"
> +	depends on OF
> +	help
> +	  The U-Boot Bootcount driver allows to access the
> +	  bootcounter through procFS or sysFS files.

This is apparently U-Boot specific. So perhaps you could rename this to
config UBOOT_BOOTCOUNT. That should make it easier to later add config
[...]_BOOTCOUNT for other bootloaders and push all common stuff under
config BOOTCOUNT (a rather generic name).

>  source "drivers/char/tpm/Kconfig"
>  
>  config TELCLOCK
> [...]
> diff --git a/drivers/char/bootcount.c b/drivers/char/bootcount.c
> new file mode 100644
> index 0000000..0ee457f
> --- /dev/null
> +++ b/drivers/char/bootcount.c
> @@ -0,0 +1,210 @@
> +/*
> + * This driver gives access(read/write) to the bootcounter used by u-boot.
> + * Access is supported via procFS and sysFS.
> + *
> + * Copyright 2008 DENX Software Engineering GmbH
> + * Author: Heiko Schocher <hs at denx.de>
> + * Based on work from: Steffen Rumler  (Steffen.Rumler at siemens.com)

Angle brackets for the email address?

> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/capability.h>
> +#include <linux/device.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/mm.h>
> +#include <linux/mman.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_device.h>
> +#include <linux/of_platform.h>
> +#include <linux/ptrace.h>
> +#include <linux/uaccess.h>
> +
> +#ifndef CONFIG_PROC_FS
> +#error "PROC FS support must be switched-on"
> +#endif

Why is this error needed? Can't you depend on PROC_FS in the Kconfig
file?

> +#include <linux/proc_fs.h>
> +
> +#define	UBOOT_BOOTCOUNT_MAGIC_OFFSET	0x04	/* offset of magic number */
> +#define	UBOOT_BOOTCOUNT_MAGIC		0xB001C041 /* magic number value */
> +
> +#define	UBOOT_BOOTCOUNT_PROC_ENTRY	"driver/bootcount"
> +
> +/*
> + * This macro frees the machine specific function from bounds checking and
> + * this like that...
> + */
> +#define PRINT_PROC(fmt, args...) \
> +	do { \
> +		*len += sprintf(buffer + *len, fmt, ##args); \
> +		if (*begin + *len > offset + size) \
> +			return 0; \
> +		if (*begin + *len < offset) { \
> +			*begin += *len; \
> +			*len = 0; \
> +		} \
> +	} while (0)
> +
> +void __iomem *mem;

Empty line here.

> +/*
> + * read U-Boot bootcounter
> + */

This comment basically repeats the function name.

> +static int
> +read_bootcounter_info(char *buffer, int *len, off_t * begin, off_t offset,
> +		       int size)
> +{
> +	unsigned long magic;
> +	unsigned long counter;
> +
> +
> +	magic = be32_to_cpu(readl(mem + UBOOT_BOOTCOUNT_MAGIC_OFFSET));
> +	counter = be32_to_cpu(readl(mem));
> +
> +	if (magic == UBOOT_BOOTCOUNT_MAGIC) {
> +		PRINT_PROC("%lu\n", counter);
> +	} else {
> +		PRINT_PROC("bad magic: 0x%lu != 0x%lu\n", magic,
> +			    (unsigned long)UBOOT_BOOTCOUNT_MAGIC);
> +	}
> +
> +	return 1;
> +}
> +
> +/*
> + * read U-Boot bootcounter (wrapper)
> + */

Ditto.

> +static int
> +read_bootcounter(char *buffer, char **start, off_t offset, int size,
> +		  int *eof, void *arg)
> +{
> +	int len = 0;
> +	off_t begin = 0;
> +
> +
> +	*eof = read_bootcounter_info(buffer, &len, &begin, offset, size);
> +
> +	if (offset >= begin + len)
> +		return 0;
> +
> +	*start = buffer + (offset - begin);
> +	return size < begin + len - offset ? size : begin + len - offset;
> +}
> +
> +/*
> + * write new value to U-Boot bootcounter
> + */
> +static int
> +write_bootcounter(struct file *file, const char *buffer, unsigned long count,
> +		   void *data)
> +{
> +	unsigned long magic;
> +
> +	magic = be32_to_cpu(readl(mem + UBOOT_BOOTCOUNT_MAGIC_OFFSET));
> +	if (magic == UBOOT_BOOTCOUNT_MAGIC)
> +		writel(cpu_to_be32(simple_strtol(buffer, NULL, 10)), mem);
> +	else
> +		return -EINVAL;
> +
> +	return count;
> +}
> +
> +/* helper for the sysFS */
> +static int show_str_bootcount(struct device *device,
> +				struct device_attribute *attr,
> +				char *buf)
> +{
> +	int ret = 0;
> +	off_t begin = 0;
> +
> +	read_bootcounter_info(buf, &ret, &begin, 0, 20);
> +	return ret;
> +}

Empty line here.

> +static int store_str_bootcount(struct device *dev,
> +			struct device_attribute *attr,
> +			const char *buf,
> +			size_t count)
> +{
> +	write_bootcounter(NULL, buf, count, NULL);
> +	return count;
> +}

Empty line here.

> +static DEVICE_ATTR(bootcount, S_IWUSR | S_IRUGO, show_str_bootcount,
> +		store_str_bootcount);
> +
> +static int __devinit bootcount_probe(struct platform_device *ofdev)
> +{
> +	struct device_node *np = of_node_get(ofdev->dev.of_node);
> +	struct proc_dir_entry *bootcount;
> +
> +	mem = of_iomap(np, 0);
> +	if (mem == NULL)
> +		dev_err(&ofdev->dev, "%s couldnt map register.\n", __func__);
> +
> +	/* init ProcFS */
> +	bootcount = create_proc_entry(UBOOT_BOOTCOUNT_PROC_ENTRY, 0600, NULL);
> +	if (bootcount == NULL) {
> +		dev_err(&ofdev->dev, "\n%s (%d): cannot create /proc/%s\n",
> +			__FILE__, __LINE__, UBOOT_BOOTCOUNT_PROC_ENTRY);
> +	} else {
> +
> +		bootcount->read_proc = read_bootcounter;
> +		bootcount->write_proc = write_bootcounter;
> +		dev_info(&ofdev->dev, "created \"/proc/%s\"\n",
> +			UBOOT_BOOTCOUNT_PROC_ENTRY);
> +	}
> +
> +	if (device_create_file(&ofdev->dev, &dev_attr_bootcount))
> +		dev_warn(&ofdev->dev, "%s couldnt register sysFS entry.\n",
> +			__func__);
> +
> +	return 0;
> +}
> +
> +static int __devexit bootcount_remove(struct platform_device *ofdev)
> +{
> +	BUG();

Why BUG() here? And there's no comment, so someone like me - entirely
unfamiliar with this stuff - who triggers this bug and checks this
location will still not know what went wrong.

> +	return 0;

And can't you return non-zero here? I haven't checked this interface,
but returning zero after BUG() looks odd.

> +}
> +
> +static const struct of_device_id __devinitconst bootcount_match[] = {
> +	{
> +		.compatible = "uboot,bootcount",
> +	},
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, bootcount_match);
> +
> +static struct platform_driver bootcount_driver = {
> +	.driver = {
> +		.name = "bootcount",
> +		.of_match_table = bootcount_match,
> +		.owner = THIS_MODULE,
> +	},
> +	.probe = bootcount_probe,
> +	.remove = bootcount_remove,

Perhaps .remove can be dropped entirely (again, I haven't checked this
interface). Then the BUG() is unneeded, isn't it?

> +};
> +

Drop newline here.

> +static int __init uboot_bootcount_init(void)
> +{
> +	return platform_driver_register(&bootcount_driver);
> +}
> +
> +static void __exit uboot_bootcount_cleanup(void)
> +{
> +	if (mem != NULL)
> +		iounmap(mem);
> +	remove_proc_entry(UBOOT_BOOTCOUNT_PROC_ENTRY, NULL);
> +}
> +
> +module_init(uboot_bootcount_init);
> +module_exit(uboot_bootcount_cleanup);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Steffen Rumler <steffen.rumler at siemens.com>");

In the comment at the top you're the author. Steffen is here. And
Steffen is also not mailed this patch directly. Does Steffen wish to be
sent messages regarding this driver in the future?  

> +MODULE_DESCRIPTION("Provide (read/write) access to the U-Boot bootcounter via PROC FS");

What happened to sysfs here?


Paul Bolle