[PATCH 2/5 v2] power: sbs-battery: rename internals to new name
Rhyland Klein
rklein at nvidia.com
Tue Dec 6 12:50:46 EST 2011
Now that this driver is named more generally, this change updates
the internal variables, defines and functions to use this new name.
v2: Added back in ids for bq20z75 to maintain compatibility.
Signed-off-by: Rhyland Klein <rklein at nvidia.com>
---
drivers/power/sbs-battery.c | 423 ++++++++++++++++++-------------------
include/linux/power/sbs-battery.h | 10 +-
2 files changed, 209 insertions(+), 224 deletions(-)
diff --git a/drivers/power/sbs-battery.c b/drivers/power/sbs-battery.c
index ce95ff7..00bd9e0 100644
--- a/drivers/power/sbs-battery.c
+++ b/drivers/power/sbs-battery.c
@@ -1,5 +1,5 @@
/*
- * Gas Gauge driver for TI's BQ20Z75
+ * Gas Gauge driver for SBS Compliant Batteries
*
* Copyright (c) 2010, NVIDIA Corporation.
*
@@ -28,7 +28,7 @@
#include <linux/interrupt.h>
#include <linux/gpio.h>
-#include <linux/power/bq20z75.h>
+#include <linux/power/sbs-battery.h>
enum {
REG_MANUFACTURER_DATA,
@@ -53,7 +53,7 @@ enum {
/* Battery Mode defines */
#define BATTERY_MODE_OFFSET 0x03
#define BATTERY_MODE_MASK 0x8000
-enum bq20z75_battery_mode {
+enum sbs_battery_mode {
BATTERY_MODE_AMPS,
BATTERY_MODE_WATTS
};
@@ -67,62 +67,56 @@ enum bq20z75_battery_mode {
#define BATTERY_FULL_CHARGED 0x20
#define BATTERY_FULL_DISCHARGED 0x10
-#define BQ20Z75_DATA(_psp, _addr, _min_value, _max_value) { \
+#define SBS_DATA(_psp, _addr, _min_value, _max_value) { \
.psp = _psp, \
.addr = _addr, \
.min_value = _min_value, \
.max_value = _max_value, \
}
-static const struct bq20z75_device_data {
+static const struct chip_data {
enum power_supply_property psp;
u8 addr;
int min_value;
int max_value;
-} bq20z75_data[] = {
+} sbs_data[] = {
[REG_MANUFACTURER_DATA] =
- BQ20Z75_DATA(POWER_SUPPLY_PROP_PRESENT, 0x00, 0, 65535),
+ SBS_DATA(POWER_SUPPLY_PROP_PRESENT, 0x00, 0, 65535),
[REG_TEMPERATURE] =
- BQ20Z75_DATA(POWER_SUPPLY_PROP_TEMP, 0x08, 0, 65535),
+ SBS_DATA(POWER_SUPPLY_PROP_TEMP, 0x08, 0, 65535),
[REG_VOLTAGE] =
- BQ20Z75_DATA(POWER_SUPPLY_PROP_VOLTAGE_NOW, 0x09, 0, 20000),
+ SBS_DATA(POWER_SUPPLY_PROP_VOLTAGE_NOW, 0x09, 0, 20000),
[REG_CURRENT] =
- BQ20Z75_DATA(POWER_SUPPLY_PROP_CURRENT_NOW, 0x0A, -32768,
- 32767),
+ SBS_DATA(POWER_SUPPLY_PROP_CURRENT_NOW, 0x0A, -32768, 32767),
[REG_CAPACITY] =
- BQ20Z75_DATA(POWER_SUPPLY_PROP_CAPACITY, 0x0E, 0, 100),
+ SBS_DATA(POWER_SUPPLY_PROP_CAPACITY, 0x0E, 0, 100),
[REG_REMAINING_CAPACITY] =
- BQ20Z75_DATA(POWER_SUPPLY_PROP_ENERGY_NOW, 0x0F, 0, 65535),
+ SBS_DATA(POWER_SUPPLY_PROP_ENERGY_NOW, 0x0F, 0, 65535),
[REG_REMAINING_CAPACITY_CHARGE] =
- BQ20Z75_DATA(POWER_SUPPLY_PROP_CHARGE_NOW, 0x0F, 0, 65535),
+ SBS_DATA(POWER_SUPPLY_PROP_CHARGE_NOW, 0x0F, 0, 65535),
[REG_FULL_CHARGE_CAPACITY] =
- BQ20Z75_DATA(POWER_SUPPLY_PROP_ENERGY_FULL, 0x10, 0, 65535),
+ SBS_DATA(POWER_SUPPLY_PROP_ENERGY_FULL, 0x10, 0, 65535),
[REG_FULL_CHARGE_CAPACITY_CHARGE] =
- BQ20Z75_DATA(POWER_SUPPLY_PROP_CHARGE_FULL, 0x10, 0, 65535),
+ SBS_DATA(POWER_SUPPLY_PROP_CHARGE_FULL, 0x10, 0, 65535),
[REG_TIME_TO_EMPTY] =
- BQ20Z75_DATA(POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, 0x12, 0,
- 65535),
+ SBS_DATA(POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, 0x12, 0, 65535),
[REG_TIME_TO_FULL] =
- BQ20Z75_DATA(POWER_SUPPLY_PROP_TIME_TO_FULL_AVG, 0x13, 0,
- 65535),
+ SBS_DATA(POWER_SUPPLY_PROP_TIME_TO_FULL_AVG, 0x13, 0, 65535),
[REG_STATUS] =
- BQ20Z75_DATA(POWER_SUPPLY_PROP_STATUS, 0x16, 0, 65535),
+ SBS_DATA(POWER_SUPPLY_PROP_STATUS, 0x16, 0, 65535),
[REG_CYCLE_COUNT] =
- BQ20Z75_DATA(POWER_SUPPLY_PROP_CYCLE_COUNT, 0x17, 0, 65535),
+ SBS_DATA(POWER_SUPPLY_PROP_CYCLE_COUNT, 0x17, 0, 65535),
[REG_DESIGN_CAPACITY] =
- BQ20Z75_DATA(POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN, 0x18, 0,
- 65535),
+ SBS_DATA(POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN, 0x18, 0, 65535),
[REG_DESIGN_CAPACITY_CHARGE] =
- BQ20Z75_DATA(POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, 0x18, 0,
- 65535),
+ SBS_DATA(POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, 0x18, 0, 65535),
[REG_DESIGN_VOLTAGE] =
- BQ20Z75_DATA(POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, 0x19, 0,
- 65535),
+ SBS_DATA(POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, 0x19, 0, 65535),
[REG_SERIAL_NUMBER] =
- BQ20Z75_DATA(POWER_SUPPLY_PROP_SERIAL_NUMBER, 0x1C, 0, 65535),
+ SBS_DATA(POWER_SUPPLY_PROP_SERIAL_NUMBER, 0x1C, 0, 65535),
};
-static enum power_supply_property bq20z75_properties[] = {
+static enum power_supply_property sbs_properties[] = {
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_HEALTH,
POWER_SUPPLY_PROP_PRESENT,
@@ -144,10 +138,10 @@ static enum power_supply_property bq20z75_properties[] = {
POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
};
-struct bq20z75_info {
+struct sbs_info {
struct i2c_client *client;
struct power_supply power_supply;
- struct bq20z75_platform_data *pdata;
+ struct sbs_platform_data *pdata;
bool is_present;
bool gpio_detect;
bool enable_detection;
@@ -158,14 +152,14 @@ struct bq20z75_info {
int ignore_changes;
};
-static int bq20z75_read_word_data(struct i2c_client *client, u8 address)
+static int sbs_read_word_data(struct i2c_client *client, u8 address)
{
- struct bq20z75_info *bq20z75_device = i2c_get_clientdata(client);
+ struct sbs_info *chip = i2c_get_clientdata(client);
s32 ret = 0;
int retries = 1;
- if (bq20z75_device->pdata)
- retries = max(bq20z75_device->pdata->i2c_retry_count + 1, 1);
+ if (chip->pdata)
+ retries = max(chip->pdata->i2c_retry_count + 1, 1);
while (retries > 0) {
ret = i2c_smbus_read_word_data(client, address);
@@ -184,15 +178,15 @@ static int bq20z75_read_word_data(struct i2c_client *client, u8 address)
return le16_to_cpu(ret);
}
-static int bq20z75_write_word_data(struct i2c_client *client, u8 address,
+static int sbs_write_word_data(struct i2c_client *client, u8 address,
u16 value)
{
- struct bq20z75_info *bq20z75_device = i2c_get_clientdata(client);
+ struct sbs_info *chip = i2c_get_clientdata(client);
s32 ret = 0;
int retries = 1;
- if (bq20z75_device->pdata)
- retries = max(bq20z75_device->pdata->i2c_retry_count + 1, 1);
+ if (chip->pdata)
+ retries = max(chip->pdata->i2c_retry_count + 1, 1);
while (retries > 0) {
ret = i2c_smbus_write_word_data(client, address,
@@ -212,44 +206,41 @@ static int bq20z75_write_word_data(struct i2c_client *client, u8 address,
return 0;
}
-static int bq20z75_get_battery_presence_and_health(
+static int sbs_get_battery_presence_and_health(
struct i2c_client *client, enum power_supply_property psp,
union power_supply_propval *val)
{
s32 ret;
- struct bq20z75_info *bq20z75_device = i2c_get_clientdata(client);
+ struct sbs_info *chip = i2c_get_clientdata(client);
if (psp == POWER_SUPPLY_PROP_PRESENT &&
- bq20z75_device->gpio_detect) {
- ret = gpio_get_value(
- bq20z75_device->pdata->battery_detect);
- if (ret == bq20z75_device->pdata->battery_detect_present)
+ chip->gpio_detect) {
+ ret = gpio_get_value(chip->pdata->battery_detect);
+ if (ret == chip->pdata->battery_detect_present)
val->intval = 1;
else
val->intval = 0;
- bq20z75_device->is_present = val->intval;
+ chip->is_present = val->intval;
return ret;
}
/* Write to ManufacturerAccess with
* ManufacturerAccess command and then
* read the status */
- ret = bq20z75_write_word_data(client,
- bq20z75_data[REG_MANUFACTURER_DATA].addr,
- MANUFACTURER_ACCESS_STATUS);
+ ret = sbs_write_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr,
+ MANUFACTURER_ACCESS_STATUS);
if (ret < 0) {
if (psp == POWER_SUPPLY_PROP_PRESENT)
val->intval = 0; /* battery removed */
return ret;
}
- ret = bq20z75_read_word_data(client,
- bq20z75_data[REG_MANUFACTURER_DATA].addr);
+ ret = sbs_read_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr);
if (ret < 0)
return ret;
- if (ret < bq20z75_data[REG_MANUFACTURER_DATA].min_value ||
- ret > bq20z75_data[REG_MANUFACTURER_DATA].max_value) {
+ if (ret < sbs_data[REG_MANUFACTURER_DATA].min_value ||
+ ret > sbs_data[REG_MANUFACTURER_DATA].max_value) {
val->intval = 0;
return 0;
}
@@ -279,24 +270,23 @@ static int bq20z75_get_battery_presence_and_health(
return 0;
}
-static int bq20z75_get_battery_property(struct i2c_client *client,
+static int sbs_get_battery_property(struct i2c_client *client,
int reg_offset, enum power_supply_property psp,
union power_supply_propval *val)
{
- struct bq20z75_info *bq20z75_device = i2c_get_clientdata(client);
+ struct sbs_info *chip = i2c_get_clientdata(client);
s32 ret;
- ret = bq20z75_read_word_data(client,
- bq20z75_data[reg_offset].addr);
+ ret = sbs_read_word_data(client, sbs_data[reg_offset].addr);
if (ret < 0)
return ret;
/* returned values are 16 bit */
- if (bq20z75_data[reg_offset].min_value < 0)
+ if (sbs_data[reg_offset].min_value < 0)
ret = (s16)ret;
- if (ret >= bq20z75_data[reg_offset].min_value &&
- ret <= bq20z75_data[reg_offset].max_value) {
+ if (ret >= sbs_data[reg_offset].min_value &&
+ ret <= sbs_data[reg_offset].max_value) {
val->intval = ret;
if (psp != POWER_SUPPLY_PROP_STATUS)
return 0;
@@ -310,12 +300,12 @@ static int bq20z75_get_battery_property(struct i2c_client *client,
else
val->intval = POWER_SUPPLY_STATUS_CHARGING;
- if (bq20z75_device->poll_time == 0)
- bq20z75_device->last_state = val->intval;
- else if (bq20z75_device->last_state != val->intval) {
- cancel_delayed_work_sync(&bq20z75_device->work);
- power_supply_changed(&bq20z75_device->power_supply);
- bq20z75_device->poll_time = 0;
+ if (chip->poll_time == 0)
+ chip->last_state = val->intval;
+ else if (chip->last_state != val->intval) {
+ cancel_delayed_work_sync(&chip->work);
+ power_supply_changed(&chip->power_supply);
+ chip->poll_time = 0;
}
} else {
if (psp == POWER_SUPPLY_PROP_STATUS)
@@ -327,7 +317,7 @@ static int bq20z75_get_battery_property(struct i2c_client *client,
return 0;
}
-static void bq20z75_unit_adjustment(struct i2c_client *client,
+static void sbs_unit_adjustment(struct i2c_client *client,
enum power_supply_property psp, union power_supply_propval *val)
{
#define BASE_UNIT_CONVERSION 1000
@@ -338,7 +328,7 @@ static void bq20z75_unit_adjustment(struct i2c_client *client,
case POWER_SUPPLY_PROP_ENERGY_NOW:
case POWER_SUPPLY_PROP_ENERGY_FULL:
case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
- /* bq20z75 provides energy in units of 10mWh.
+ /* sbs provides energy in units of 10mWh.
* Convert to µWh
*/
val->intval *= BATTERY_MODE_CAP_MULT_WATT;
@@ -354,7 +344,7 @@ static void bq20z75_unit_adjustment(struct i2c_client *client,
break;
case POWER_SUPPLY_PROP_TEMP:
- /* bq20z75 provides battery temperature in 0.1K
+ /* sbs provides battery temperature in 0.1K
* so convert it to 0.1°C
*/
val->intval -= TEMP_KELVIN_TO_CELSIUS;
@@ -362,7 +352,7 @@ static void bq20z75_unit_adjustment(struct i2c_client *client,
case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG:
case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG:
- /* bq20z75 provides time to empty and time to full in minutes.
+ /* sbs provides time to empty and time to full in minutes.
* Convert to seconds
*/
val->intval *= TIME_UNIT_CONVERSION;
@@ -374,13 +364,12 @@ static void bq20z75_unit_adjustment(struct i2c_client *client,
}
}
-static enum bq20z75_battery_mode
-bq20z75_set_battery_mode(struct i2c_client *client,
- enum bq20z75_battery_mode mode)
+static enum sbs_battery_mode sbs_set_battery_mode(struct i2c_client *client,
+ enum sbs_battery_mode mode)
{
int ret, original_val;
- original_val = bq20z75_read_word_data(client, BATTERY_MODE_OFFSET);
+ original_val = sbs_read_word_data(client, BATTERY_MODE_OFFSET);
if (original_val < 0)
return original_val;
@@ -392,68 +381,67 @@ bq20z75_set_battery_mode(struct i2c_client *client,
else
ret = original_val | BATTERY_MODE_MASK;
- ret = bq20z75_write_word_data(client, BATTERY_MODE_OFFSET, ret);
+ ret = sbs_write_word_data(client, BATTERY_MODE_OFFSET, ret);
if (ret < 0)
return ret;
return original_val & BATTERY_MODE_MASK;
}
-static int bq20z75_get_battery_capacity(struct i2c_client *client,
+static int sbs_get_battery_capacity(struct i2c_client *client,
int reg_offset, enum power_supply_property psp,
union power_supply_propval *val)
{
s32 ret;
- enum bq20z75_battery_mode mode = BATTERY_MODE_WATTS;
+ enum sbs_battery_mode mode = BATTERY_MODE_WATTS;
if (power_supply_is_amp_property(psp))
mode = BATTERY_MODE_AMPS;
- mode = bq20z75_set_battery_mode(client, mode);
+ mode = sbs_set_battery_mode(client, mode);
if (mode < 0)
return mode;
- ret = bq20z75_read_word_data(client, bq20z75_data[reg_offset].addr);
+ ret = sbs_read_word_data(client, sbs_data[reg_offset].addr);
if (ret < 0)
return ret;
if (psp == POWER_SUPPLY_PROP_CAPACITY) {
- /* bq20z75 spec says that this can be >100 %
+ /* sbs spec says that this can be >100 %
* even if max value is 100 % */
val->intval = min(ret, 100);
} else
val->intval = ret;
- ret = bq20z75_set_battery_mode(client, mode);
+ ret = sbs_set_battery_mode(client, mode);
if (ret < 0)
return ret;
return 0;
}
-static char bq20z75_serial[5];
-static int bq20z75_get_battery_serial_number(struct i2c_client *client,
+static char sbs_serial[5];
+static int sbs_get_battery_serial_number(struct i2c_client *client,
union power_supply_propval *val)
{
int ret;
- ret = bq20z75_read_word_data(client,
- bq20z75_data[REG_SERIAL_NUMBER].addr);
+ ret = sbs_read_word_data(client, sbs_data[REG_SERIAL_NUMBER].addr);
if (ret < 0)
return ret;
- ret = sprintf(bq20z75_serial, "%04x", ret);
- val->strval = bq20z75_serial;
+ ret = sprintf(sbs_serial, "%04x", ret);
+ val->strval = sbs_serial;
return 0;
}
-static int bq20z75_get_property_index(struct i2c_client *client,
+static int sbs_get_property_index(struct i2c_client *client,
enum power_supply_property psp)
{
int count;
- for (count = 0; count < ARRAY_SIZE(bq20z75_data); count++)
- if (psp == bq20z75_data[count].psp)
+ for (count = 0; count < ARRAY_SIZE(sbs_data); count++)
+ if (psp == sbs_data[count].psp)
return count;
dev_warn(&client->dev,
@@ -462,19 +450,19 @@ static int bq20z75_get_property_index(struct i2c_client *client,
return -EINVAL;
}
-static int bq20z75_get_property(struct power_supply *psy,
+static int sbs_get_property(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
{
int ret = 0;
- struct bq20z75_info *bq20z75_device = container_of(psy,
- struct bq20z75_info, power_supply);
- struct i2c_client *client = bq20z75_device->client;
+ struct sbs_info *chip = container_of(psy,
+ struct sbs_info, power_supply);
+ struct i2c_client *client = chip->client;
switch (psp) {
case POWER_SUPPLY_PROP_PRESENT:
case POWER_SUPPLY_PROP_HEALTH:
- ret = bq20z75_get_battery_presence_and_health(client, psp, val);
+ ret = sbs_get_battery_presence_and_health(client, psp, val);
if (psp == POWER_SUPPLY_PROP_PRESENT)
return 0;
break;
@@ -490,15 +478,15 @@ static int bq20z75_get_property(struct power_supply *psy,
case POWER_SUPPLY_PROP_CHARGE_FULL:
case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
case POWER_SUPPLY_PROP_CAPACITY:
- ret = bq20z75_get_property_index(client, psp);
+ ret = sbs_get_property_index(client, psp);
if (ret < 0)
break;
- ret = bq20z75_get_battery_capacity(client, ret, psp, val);
+ ret = sbs_get_battery_capacity(client, ret, psp, val);
break;
case POWER_SUPPLY_PROP_SERIAL_NUMBER:
- ret = bq20z75_get_battery_serial_number(client, val);
+ ret = sbs_get_battery_serial_number(client, val);
break;
case POWER_SUPPLY_PROP_STATUS:
@@ -509,11 +497,11 @@ static int bq20z75_get_property(struct power_supply *psy,
case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG:
case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG:
case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
- ret = bq20z75_get_property_index(client, psp);
+ ret = sbs_get_property_index(client, psp);
if (ret < 0)
break;
- ret = bq20z75_get_battery_property(client, ret, psp, val);
+ ret = sbs_get_battery_property(client, ret, psp, val);
break;
default:
@@ -522,25 +510,25 @@ static int bq20z75_get_property(struct power_supply *psy,
return -EINVAL;
}
- if (!bq20z75_device->enable_detection)
+ if (!chip->enable_detection)
goto done;
- if (!bq20z75_device->gpio_detect &&
- bq20z75_device->is_present != (ret >= 0)) {
- bq20z75_device->is_present = (ret >= 0);
- power_supply_changed(&bq20z75_device->power_supply);
+ if (!chip->gpio_detect &&
+ chip->is_present != (ret >= 0)) {
+ chip->is_present = (ret >= 0);
+ power_supply_changed(&chip->power_supply);
}
done:
if (!ret) {
/* Convert units to match requirements for power supply class */
- bq20z75_unit_adjustment(client, psp, val);
+ sbs_unit_adjustment(client, psp, val);
}
dev_dbg(&client->dev,
"%s: property = %d, value = %x\n", __func__, psp, val->intval);
- if (ret && bq20z75_device->is_present)
+ if (ret && chip->is_present)
return ret;
/* battery not present, so return NODATA for properties */
@@ -550,7 +538,7 @@ done:
return 0;
}
-static irqreturn_t bq20z75_irq(int irq, void *devid)
+static irqreturn_t sbs_irq(int irq, void *devid)
{
struct power_supply *battery = devid;
@@ -559,36 +547,35 @@ static irqreturn_t bq20z75_irq(int irq, void *devid)
return IRQ_HANDLED;
}
-static void bq20z75_external_power_changed(struct power_supply *psy)
+static void sbs_external_power_changed(struct power_supply *psy)
{
- struct bq20z75_info *bq20z75_device;
+ struct sbs_info *chip;
- bq20z75_device = container_of(psy, struct bq20z75_info, power_supply);
+ chip = container_of(psy, struct sbs_info, power_supply);
- if (bq20z75_device->ignore_changes > 0) {
- bq20z75_device->ignore_changes--;
+ if (chip->ignore_changes > 0) {
+ chip->ignore_changes--;
return;
}
/* cancel outstanding work */
- cancel_delayed_work_sync(&bq20z75_device->work);
+ cancel_delayed_work_sync(&chip->work);
- schedule_delayed_work(&bq20z75_device->work, HZ);
- bq20z75_device->poll_time = bq20z75_device->pdata->poll_retry_count;
+ schedule_delayed_work(&chip->work, HZ);
+ chip->poll_time = chip->pdata->poll_retry_count;
}
-static void bq20z75_delayed_work(struct work_struct *work)
+static void sbs_delayed_work(struct work_struct *work)
{
- struct bq20z75_info *bq20z75_device;
+ struct sbs_info *chip;
s32 ret;
- bq20z75_device = container_of(work, struct bq20z75_info, work.work);
+ chip = container_of(work, struct sbs_info, work.work);
- ret = bq20z75_read_word_data(bq20z75_device->client,
- bq20z75_data[REG_STATUS].addr);
+ ret = sbs_read_word_data(chip->client, sbs_data[REG_STATUS].addr);
/* if the read failed, give up on this work */
if (ret < 0) {
- bq20z75_device->poll_time = 0;
+ chip->poll_time = 0;
return;
}
@@ -601,14 +588,14 @@ static void bq20z75_delayed_work(struct work_struct *work)
else
ret = POWER_SUPPLY_STATUS_CHARGING;
- if (bq20z75_device->last_state != ret) {
- bq20z75_device->poll_time = 0;
- power_supply_changed(&bq20z75_device->power_supply);
+ if (chip->last_state != ret) {
+ chip->poll_time = 0;
+ power_supply_changed(&chip->power_supply);
return;
}
- if (bq20z75_device->poll_time > 0) {
- schedule_delayed_work(&bq20z75_device->work, HZ);
- bq20z75_device->poll_time--;
+ if (chip->poll_time > 0) {
+ schedule_delayed_work(&chip->work, HZ);
+ chip->poll_time--;
return;
}
}
@@ -618,17 +605,18 @@ static void bq20z75_delayed_work(struct work_struct *work)
#include <linux/of_device.h>
#include <linux/of_gpio.h>
-static const struct of_device_id bq20z75_dt_ids[] = {
+static const struct of_device_id sbs_dt_ids[] = {
+ { .compatible = "sbs,sbs-battery" },
{ .compatible = "ti,bq20z75" },
{ }
};
-MODULE_DEVICE_TABLE(i2c, bq20z75_dt_ids);
+MODULE_DEVICE_TABLE(i2c, sbs_dt_ids);
-static struct bq20z75_platform_data *bq20z75_of_populate_pdata(
+static struct sbs_platform_data *sbs_of_populate_pdata(
struct i2c_client *client)
{
struct device_node *of_node = client->dev.of_node;
- struct bq20z75_platform_data *pdata = client->dev.platform_data;
+ struct sbs_platform_data *pdata = client->dev.platform_data;
enum of_gpio_flags gpio_flags;
int rc;
u32 prop;
@@ -644,31 +632,31 @@ static struct bq20z75_platform_data *bq20z75_of_populate_pdata(
/* first make sure at least one property is set, otherwise
* it won't change behavior from running without pdata.
*/
- if (!of_get_property(of_node, "ti,i2c-retry-count", NULL) &&
- !of_get_property(of_node, "ti,poll-retry-count", NULL) &&
- !of_get_property(of_node, "ti,battery-detect-gpios", NULL))
+ if (!of_get_property(of_node, "sbs,i2c-retry-count", NULL) &&
+ !of_get_property(of_node, "sbs,poll-retry-count", NULL) &&
+ !of_get_property(of_node, "sbs,battery-detect-gpios", NULL))
goto of_out;
- pdata = devm_kzalloc(&client->dev, sizeof(struct bq20z75_platform_data),
+ pdata = devm_kzalloc(&client->dev, sizeof(struct sbs_platform_data),
GFP_KERNEL);
if (!pdata)
goto of_out;
- rc = of_property_read_u32(of_node, "ti,i2c-retry-count", &prop);
+ rc = of_property_read_u32(of_node, "sbs,i2c-retry-count", &prop);
if (!rc)
pdata->i2c_retry_count = prop;
- rc = of_property_read_u32(of_node, "ti,poll-retry-count", &prop);
+ rc = of_property_read_u32(of_node, "sbs,poll-retry-count", &prop);
if (!rc)
pdata->poll_retry_count = prop;
- if (!of_get_property(of_node, "ti,battery-detect-gpios", NULL)) {
+ if (!of_get_property(of_node, "sbs,battery-detect-gpios", NULL)) {
pdata->battery_detect = -1;
goto of_out;
}
pdata->battery_detect = of_get_named_gpio_flags(of_node,
- "ti,battery-detect-gpios", 0, &gpio_flags);
+ "sbs,battery-detect-gpios", 0, &gpio_flags);
if (gpio_flags & OF_GPIO_ACTIVE_LOW)
pdata->battery_detect_present = 0;
@@ -679,60 +667,57 @@ of_out:
return pdata;
}
#else
-#define bq20z75_dt_ids NULL
-static struct bq20z75_platform_data *bq20z75_of_populate_pdata(
+#define sbs_dt_ids NULL
+static struct sbs_platform_data *sbs_of_populate_pdata(
struct i2c_client *client)
{
return client->dev.platform_data;
}
#endif
-static int __devinit bq20z75_probe(struct i2c_client *client,
+static int __devinit sbs_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
- struct bq20z75_info *bq20z75_device;
- struct bq20z75_platform_data *pdata = client->dev.platform_data;
+ struct sbs_info *chip;
+ struct sbs_platform_data *pdata = client->dev.platform_data;
int rc;
int irq;
- bq20z75_device = kzalloc(sizeof(struct bq20z75_info), GFP_KERNEL);
- if (!bq20z75_device)
+ chip = kzalloc(sizeof(struct sbs_info), GFP_KERNEL);
+ if (!chip)
return -ENOMEM;
- bq20z75_device->client = client;
- bq20z75_device->enable_detection = false;
- bq20z75_device->gpio_detect = false;
- bq20z75_device->power_supply.name = "battery";
- bq20z75_device->power_supply.type = POWER_SUPPLY_TYPE_BATTERY;
- bq20z75_device->power_supply.properties = bq20z75_properties;
- bq20z75_device->power_supply.num_properties =
- ARRAY_SIZE(bq20z75_properties);
- bq20z75_device->power_supply.get_property = bq20z75_get_property;
+ chip->client = client;
+ chip->enable_detection = false;
+ chip->gpio_detect = false;
+ chip->power_supply.name = "battery";
+ chip->power_supply.type = POWER_SUPPLY_TYPE_BATTERY;
+ chip->power_supply.properties = sbs_properties;
+ chip->power_supply.num_properties = ARRAY_SIZE(sbs_properties);
+ chip->power_supply.get_property = sbs_get_property;
/* ignore first notification of external change, it is generated
* from the power_supply_register call back
*/
- bq20z75_device->ignore_changes = 1;
- bq20z75_device->last_state = POWER_SUPPLY_STATUS_UNKNOWN;
- bq20z75_device->power_supply.external_power_changed =
- bq20z75_external_power_changed;
+ chip->ignore_changes = 1;
+ chip->last_state = POWER_SUPPLY_STATUS_UNKNOWN;
+ chip->power_supply.external_power_changed = sbs_external_power_changed;
- pdata = bq20z75_of_populate_pdata(client);
+ pdata = sbs_of_populate_pdata(client);
if (pdata) {
- bq20z75_device->gpio_detect =
- gpio_is_valid(pdata->battery_detect);
- bq20z75_device->pdata = pdata;
+ chip->gpio_detect = gpio_is_valid(pdata->battery_detect);
+ chip->pdata = pdata;
}
- i2c_set_clientdata(client, bq20z75_device);
+ i2c_set_clientdata(client, chip);
- if (!bq20z75_device->gpio_detect)
+ if (!chip->gpio_detect)
goto skip_gpio;
rc = gpio_request(pdata->battery_detect, dev_name(&client->dev));
if (rc) {
dev_warn(&client->dev, "Failed to request gpio: %d\n", rc);
- bq20z75_device->gpio_detect = false;
+ chip->gpio_detect = false;
goto skip_gpio;
}
@@ -740,7 +725,7 @@ static int __devinit bq20z75_probe(struct i2c_client *client,
if (rc) {
dev_warn(&client->dev, "Failed to get gpio as input: %d\n", rc);
gpio_free(pdata->battery_detect);
- bq20z75_device->gpio_detect = false;
+ chip->gpio_detect = false;
goto skip_gpio;
}
@@ -748,25 +733,25 @@ static int __devinit bq20z75_probe(struct i2c_client *client,
if (irq <= 0) {
dev_warn(&client->dev, "Failed to get gpio as irq: %d\n", irq);
gpio_free(pdata->battery_detect);
- bq20z75_device->gpio_detect = false;
+ chip->gpio_detect = false;
goto skip_gpio;
}
- rc = request_irq(irq, bq20z75_irq,
+ rc = request_irq(irq, sbs_irq,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- dev_name(&client->dev), &bq20z75_device->power_supply);
+ dev_name(&client->dev), &chip->power_supply);
if (rc) {
dev_warn(&client->dev, "Failed to request irq: %d\n", rc);
gpio_free(pdata->battery_detect);
- bq20z75_device->gpio_detect = false;
+ chip->gpio_detect = false;
goto skip_gpio;
}
- bq20z75_device->irq = irq;
+ chip->irq = irq;
skip_gpio:
- rc = power_supply_register(&client->dev, &bq20z75_device->power_supply);
+ rc = power_supply_register(&client->dev, &chip->power_supply);
if (rc) {
dev_err(&client->dev,
"%s: Failed to register power supply\n", __func__);
@@ -776,96 +761,96 @@ skip_gpio:
dev_info(&client->dev,
"%s: battery gas gauge device registered\n", client->name);
- INIT_DELAYED_WORK(&bq20z75_device->work, bq20z75_delayed_work);
+ INIT_DELAYED_WORK(&chip->work, sbs_delayed_work);
- bq20z75_device->enable_detection = true;
+ chip->enable_detection = true;
return 0;
exit_psupply:
- if (bq20z75_device->irq)
- free_irq(bq20z75_device->irq, &bq20z75_device->power_supply);
- if (bq20z75_device->gpio_detect)
+ if (chip->irq)
+ free_irq(chip->irq, &chip->power_supply);
+ if (chip->gpio_detect)
gpio_free(pdata->battery_detect);
- kfree(bq20z75_device);
+ kfree(chip);
return rc;
}
-static int __devexit bq20z75_remove(struct i2c_client *client)
+static int __devexit sbs_remove(struct i2c_client *client)
{
- struct bq20z75_info *bq20z75_device = i2c_get_clientdata(client);
+ struct sbs_info *chip = i2c_get_clientdata(client);
- if (bq20z75_device->irq)
- free_irq(bq20z75_device->irq, &bq20z75_device->power_supply);
- if (bq20z75_device->gpio_detect)
- gpio_free(bq20z75_device->pdata->battery_detect);
+ if (chip->irq)
+ free_irq(chip->irq, &chip->power_supply);
+ if (chip->gpio_detect)
+ gpio_free(chip->pdata->battery_detect);
- power_supply_unregister(&bq20z75_device->power_supply);
+ power_supply_unregister(&chip->power_supply);
- cancel_delayed_work_sync(&bq20z75_device->work);
+ cancel_delayed_work_sync(&chip->work);
- kfree(bq20z75_device);
- bq20z75_device = NULL;
+ kfree(chip);
+ chip = NULL;
return 0;
}
#if defined CONFIG_PM
-static int bq20z75_suspend(struct i2c_client *client,
+static int sbs_suspend(struct i2c_client *client,
pm_message_t state)
{
- struct bq20z75_info *bq20z75_device = i2c_get_clientdata(client);
+ struct sbs_info *chip = i2c_get_clientdata(client);
s32 ret;
- if (bq20z75_device->poll_time > 0)
- cancel_delayed_work_sync(&bq20z75_device->work);
+ if (chip->poll_time > 0)
+ cancel_delayed_work_sync(&chip->work);
/* write to manufacturer access with sleep command */
- ret = bq20z75_write_word_data(client,
- bq20z75_data[REG_MANUFACTURER_DATA].addr,
+ ret = sbs_write_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr,
MANUFACTURER_ACCESS_SLEEP);
- if (bq20z75_device->is_present && ret < 0)
+ if (chip->is_present && ret < 0)
return ret;
return 0;
}
#else
-#define bq20z75_suspend NULL
+#define sbs_suspend NULL
#endif
-/* any smbus transaction will wake up bq20z75 */
-#define bq20z75_resume NULL
+/* any smbus transaction will wake up sbs */
+#define sbs_resume NULL
-static const struct i2c_device_id bq20z75_id[] = {
+static const struct i2c_device_id sbs_id[] = {
{ "bq20z75", 0 },
+ { "sbs-battery", 1 },
{}
};
-MODULE_DEVICE_TABLE(i2c, bq20z75_id);
-
-static struct i2c_driver bq20z75_battery_driver = {
- .probe = bq20z75_probe,
- .remove = __devexit_p(bq20z75_remove),
- .suspend = bq20z75_suspend,
- .resume = bq20z75_resume,
- .id_table = bq20z75_id,
+MODULE_DEVICE_TABLE(i2c, sbs_id);
+
+static struct i2c_driver sbs_battery_driver = {
+ .probe = sbs_probe,
+ .remove = __devexit_p(sbs_remove),
+ .suspend = sbs_suspend,
+ .resume = sbs_resume,
+ .id_table = sbs_id,
.driver = {
- .name = "bq20z75-battery",
- .of_match_table = bq20z75_dt_ids,
+ .name = "sbs-battery",
+ .of_match_table = sbs_dt_ids,
},
};
-static int __init bq20z75_battery_init(void)
+static int __init sbs_battery_init(void)
{
- return i2c_add_driver(&bq20z75_battery_driver);
+ return i2c_add_driver(&sbs_battery_driver);
}
-module_init(bq20z75_battery_init);
+module_init(sbs_battery_init);
-static void __exit bq20z75_battery_exit(void)
+static void __exit sbs_battery_exit(void)
{
- i2c_del_driver(&bq20z75_battery_driver);
+ i2c_del_driver(&sbs_battery_driver);
}
-module_exit(bq20z75_battery_exit);
+module_exit(sbs_battery_exit);
-MODULE_DESCRIPTION("BQ20z75 battery monitor driver");
+MODULE_DESCRIPTION("SBS battery monitor driver");
MODULE_LICENSE("GPL");
diff --git a/include/linux/power/sbs-battery.h b/include/linux/power/sbs-battery.h
index 1398eb0..2b0a9d9 100644
--- a/include/linux/power/sbs-battery.h
+++ b/include/linux/power/sbs-battery.h
@@ -1,5 +1,5 @@
/*
- * Gas Gauge driver for TI's BQ20Z75
+ * Gas Gauge driver for SBS Compliant Gas Gauges
*
* Copyright (c) 2010, NVIDIA Corporation.
*
@@ -18,21 +18,21 @@
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*/
-#ifndef __LINUX_POWER_BQ20Z75_H_
-#define __LINUX_POWER_BQ20Z75_H_
+#ifndef __LINUX_POWER_SBS_BATTERY_H_
+#define __LINUX_POWER_SBS_BATTERY_H_
#include <linux/power_supply.h>
#include <linux/types.h>
/**
- * struct bq20z75_platform_data - platform data for bq20z75 devices
+ * struct sbs_platform_data - platform data for sbs devices
* @battery_detect: GPIO which is used to detect battery presence
* @battery_detect_present: gpio state when battery is present (0 / 1)
* @i2c_retry_count: # of times to retry on i2c IO failure
* @poll_retry_count: # of times to retry looking for new status after
* external change notification
*/
-struct bq20z75_platform_data {
+struct sbs_platform_data {
int battery_detect;
int battery_detect_present;
int i2c_retry_count;
--
1.7.0.4
More information about the devicetree-discuss
mailing list