[PATCH 2/3] arm/dts: OMAP: Remove bootargs node from board files

Rob Herring robherring2 at gmail.com
Wed Dec 7 05:06:48 EST 2011


Benoit,

On 12/06/2011 10:49 AM, Benoit Cousson wrote:
> Since 3.2, the CONFIG_ARM_ATAG_DTB_COMPAT config allows
> an old bootloader to still use ATAG to provide cmdline.
> 
> Remove chosen/bootargs from the DTS board files.
> 
> Signed-off-by: Benoit Cousson <b-cousson at ti.com>
> Cc: Grant Likely <grant.likely at secretlab.ca>
> Cc: Rob Herring <rob.herring at calxeda.com>

Acked-by: Rob Herring <rob.herring at calxeda.com>

Rob

> ---
>  arch/arm/boot/dts/omap3-beagle.dts |    9 ---------
>  arch/arm/boot/dts/omap4-panda.dts  |    9 ---------
>  arch/arm/boot/dts/omap4-sdp.dts    |    9 ---------
>  3 files changed, 0 insertions(+), 27 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
> index 9486be6..9f72cd4 100644
> --- a/arch/arm/boot/dts/omap3-beagle.dts
> +++ b/arch/arm/boot/dts/omap3-beagle.dts
> @@ -13,15 +13,6 @@
>  	model = "TI OMAP3 BeagleBoard";
>  	compatible = "ti,omap3-beagle", "ti,omap3";
>  
> -	/*
> -	 * Since the initial device tree board file does not create any
> -	 * devices (MMC, network...), the only way to boot is to provide a
> -	 * ramdisk.
> -	 */
> -	chosen {
> -		bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug earlyprintk";
> -	};
> -
>  	memory {
>  		device_type = "memory";
>  		reg = <0x80000000 0x20000000>; /* 512 MB */
> diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
> index c702657..9755ad5 100644
> --- a/arch/arm/boot/dts/omap4-panda.dts
> +++ b/arch/arm/boot/dts/omap4-panda.dts
> @@ -13,15 +13,6 @@
>  	model = "TI OMAP4 PandaBoard";
>  	compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4";
>  
> -	/*
> -	 * Since the initial device tree board file does not create any
> -	 * devices (MMC, network...), the only way to boot is to provide a
> -	 * ramdisk.
> -	 */
> -	chosen {
> -		bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug";
> -	};
> -
>  	memory {
>  		device_type = "memory";
>  		reg = <0x80000000 0x40000000>; /* 1 GB */
> diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
> index 066e28c..63c6b2b 100644
> --- a/arch/arm/boot/dts/omap4-sdp.dts
> +++ b/arch/arm/boot/dts/omap4-sdp.dts
> @@ -13,15 +13,6 @@
>  	model = "TI OMAP4 SDP board";
>  	compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
>  
> -	/*
> -	 * Since the initial device tree board file does not create any
> -	 * devices (MMC, network...), the only way to boot is to provide a
> -	 * ramdisk.
> -	 */
> -	chosen {
> -		bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug";
> -	};
> -
>  	memory {
>  		device_type = "memory";
>  		reg = <0x80000000 0x40000000>; /* 1 GB */


More information about the devicetree-discuss mailing list