[PATCH v2 07/10] arm/dts: omap4-panda: Add twl6030 and i2c EEPROM

Kevin Hilman khilman at ti.com
Thu Dec 15 11:31:53 EST 2011


"Cousson, Benoit" <b-cousson at ti.com> writes:

> Hi Kevin,
>
> On 12/14/2011 6:06 AM, Kevin Hilman wrote:
>> Hi Benoit,
>>
>> Benoit Cousson<b-cousson at ti.com>  writes:
>>
>>> Update pandaboard dts file with required clock frequencies
>>> for the i2c client devices existing on pandaboard.
>>>
>>> Add the twl6030 node in i2c1 controller.
>>>
>>> This is the minimal support needed to boot OMAP4 boards
>>> without any crash.
>>> The support for all the features included in this MFD will be
>>> added later.
>>>
>>> Add a generic i2c EEPROM entry.
>>>
>>> Signed-off-by: Benoit Cousson<b-cousson at ti.com>
>>> Cc: Grant Likely<grant.likely at secretlab.ca>
>>> ---
>>>   arch/arm/boot/dts/omap4-panda.dts |   45 +++++++++++++++++++++++++++++++++++++
>>>   1 files changed, 45 insertions(+), 0 deletions(-)
>>>
>>> diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
>>> index 9755ad5..b66bcd6 100644
>>> --- a/arch/arm/boot/dts/omap4-panda.dts
>>> +++ b/arch/arm/boot/dts/omap4-panda.dts
>>> @@ -18,3 +18,48 @@
>>>   		reg =<0x80000000 0x40000000>; /* 1 GB */
>>>   	};
>>>   };
>>> +
>>> +&i2c1 {
>>> +	clock-frequency =<400000>;
>>> +
>>> +	/*
>>> +	 * Integrated Power Management Chip
>>> +	 * http://www.ti.com/lit/ds/symlink/twl6030.pdf
>>> +	 */
>>> +	twl at 48 {
>>> +		compatible = "ti,twl6030";
>>> +		reg =<0x48>;
>>> +		/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
>>> +		interrupts =<0 7 4>; /* IRQ_SYS_1N cascaded to gic */
>>> +		interrupt-controller;
>>> +		#interrupt-cells =<1>;
>>> +		interrupt-parent =<&gic>;
>>> +
>>> +		/* twl is a MFD, so it will contain a bunch of sub-ips */
>>> +		rtc {
>>> +			compatible = "ti,twl4030-rtc";
>>> +			interrupts =<11>;
>>> +		};
>>
>> After seeing the mostly cut&  paste in Rajendra's regulator series, I'm
>> wondering if it wouldn't be better to just have a twl4030.dtsi here
>> which has the RTC and all the regulators with the default voltage ranges
>> from the TWL data sheet.
>
> Yes, indeed, it is still small here but will become much bigger with
> the regulators.
> In fact twl6030 is a SoC like OMAP, so all the TWL specific internal
> details can be located in a single file.
> The board will just have to provide the i2c address and the IRQ information.
>
>> Not knowing much about how includes work in DT, would it then be
>> possible for board files to override things like default voltage ranges
>> for regulators?
>
> To be honest, I was wondering as well how to do that with the
> /include/ functionality :-)
> But I've just done a couple of DTC test, and this seems to be pretty
> straightforward.
>
> The boards will contain that:
> &i2c1 {
> 	clock-frequency = <400000>;
>
> 	twl: twl at 48 {
> 		reg = <0x48>;
> 		/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
> 		interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */
> 		interrupt-controller;
> 		interrupt-parent = <&gic>;
> 	};
> };
>
> /include/ "twl6030.dtsi"
>

Nice.

> ...
>
> And the twl6030.dtsi will contain that for the moment:
>
> /*
>  * Integrated Power Management Chip
>  * http://www.ti.com/lit/ds/symlink/twl6030.pdf
>  */
> &twl {
> 	compatible = "ti,twl6030";
> 	#interrupt-cells = <1>;
>
> 	/* twl is a MFD, so it will contain a bunch of sub-ips */
> 	rtc {
> 		compatible = "ti,twl4030-rtc";
> 		interrupts = <11>;
> 	};
> };
>
> And then all the regulators from Rajendra's series will be there as well.
>
> This will avoid the duplication between sdp and panda. Beagle will
> need a twl4030.dtsi which is different than the twl6030.

Great!

> I'll update and repost the series soon.

Thanks,

Kevin


More information about the devicetree-discuss mailing list