February 2015 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Mon Feb 2 09:18:26 AEDT 2015
Ending: Sat Feb 28 15:23:49 AEDT 2015
Messages: 427

• [Skiboot] [PATCH] astbmc: Allow loading of separate payload from flash   Joel Stanley
• [Skiboot] [PATCH] i2c: Do not read the 'ibm, port-name' property   Benjamin Herrenschmidt
• [Skiboot] [PATCH v2] astbmc: Allow loading of separate payload from flash   Joel Stanley
• [Skiboot] [PATCH v2 0/2] New vpd hierarchial structure in DT   Neelesh Gupta
• [Skiboot] [PATCH] i2c: Do not read the 'ibm, port-name' property   Neelesh Gupta
• [Skiboot] [PATCH v3] astbmc: Allow loading of payload from flash   Joel Stanley
• [Skiboot] [PATCH v2 0/2] New vpd hierarchial structure in DT   Stewart Smith
• [Skiboot] [PATCH v2] p8/i2c: Add OPAL properties in the i2c bus nodes   Neelesh Gupta
• [Skiboot] [PATCH v2] p8/i2c: Add OPAL properties in the i2c bus nodes   Neelesh Gupta
• [Skiboot] [PATCH v2] p8/i2c: Add OPAL properties in the i2c bus nodes   Stewart Smith
• [Skiboot] [PATCH v2 0/4] Watchdog timer support   Alistair Popple
• [Skiboot] [PATCH v2 1/4] ipmi: Add a function to (re)initialise a message without allocation   Alistair Popple
• [Skiboot] [PATCH v2 2/4] platform: Add exit platform hook   Alistair Popple
• [Skiboot] [PATCH v2 3/4] ipmi: Add support for synchronous message sending   Alistair Popple
• [Skiboot] [PATCH v2 4/4] ipmi/wdt: Add ipmi watchdog timer support   Alistair Popple
• [Skiboot] [PATCH 3/5] ipmi: Implement Read Event and SEL parsing   Stewart Smith
• [Skiboot] [PATCH 4/5] ipmi: Message Linux to perform graceful shutdown   Stewart Smith
• [Skiboot] [PATCH 3/5] ipmi: Implement Read Event and SEL parsing   Stewart Smith
• [Skiboot] [PATCH 3/5] ipmi: Implement Read Event and SEL parsing   Joel Stanley
• [Skiboot] [PATCH 3/5] ipmi: Implement Read Event and SEL parsing   Joel Stanley
• [Skiboot] [PATCH 4/5] ipmi: Message Linux to perform graceful shutdown   Joel Stanley
• [Skiboot] [PATCH v2] p8/i2c: Add OPAL properties in the i2c bus nodes   Neelesh Gupta
• [Skiboot] [PATCH v3 0/3] Series short description   Neelesh Gupta
• [Skiboot] [PATCH v3 1/3] core/device: Function to return child node using name   Neelesh Gupta
• [Skiboot] [PATCH v3 2/3] vpd: Use slca parent-child relationship to create vpd tree   Neelesh Gupta
• [Skiboot] [PATCH v3 3/3] Document the device-tree entries for the VPD   Neelesh Gupta
• [Skiboot] [PATCH 1/2] Makefile: clean the gcov files created during coverage   Neelesh Gupta
• [Skiboot] [PATCH 2/2] libc/memmove: Correct the buffer overlap condition   Neelesh Gupta
• [Skiboot] [PATCH 2/2] libc/memmove: Correct the buffer overlap condition   Stewart Smith
• [Skiboot] [PATCH 1/2] Makefile: clean the gcov files created during coverage   Stewart Smith
• [Skiboot] [PATCH 0/4] IPMI graceful shutdown   Joel Stanley
• [Skiboot] [PATCH 1/4] ipmi: handle SMS_ATN events   Joel Stanley
• [Skiboot] [PATCH 2/4] ipmi: Set BMC Global Enables to enable notifications   Joel Stanley
• [Skiboot] [PATCH 3/4] ipmi: Implement Read Event and SEL parsing   Joel Stanley
• [Skiboot] [PATCH 4/4] ipmi: Message Linux to perform graceful shutdown   Joel Stanley
• [Skiboot] [PATCH 2/2] libc/memmove: Correct the buffer overlap condition   Neelesh Gupta
• [Skiboot] [PATCHv2] add nx-842 coproc support   Stewart Smith
• [Skiboot] [PATCH v2 4/4] ipmi/wdt: Add ipmi watchdog timer support   Joel Stanley
• [Skiboot] [PATCH v2 3/4] ipmi: Add support for synchronous message sending   Joel Stanley
• [Skiboot] [PATCH v2 2/4] platform: Add exit platform hook   Joel Stanley
• [Skiboot] [PATCH v2 1/4] ipmi: Add a function to (re)initialise a message without allocation   Joel Stanley
• [Skiboot] [PATCH v2 4/4] ipmi/wdt: Add ipmi watchdog timer support   Alistair Popple
• [Skiboot] [PATCH v2] opal: Do not overwrite same HMI event for multiple HMI errors.   Mahesh J Salgaonkar
• [Skiboot] [PATCH v2 0/3] opal: Enhance HMI handler to identify/report reason for Malfunction Alert.   Mahesh J Salgaonkar
• [Skiboot] [PATCH v2 1/3] opal: Enhance HMI event structure to accommodate checkstop info.   Mahesh J Salgaonkar
• [Skiboot] [PATCH v2 2/3] opal: Check Core FIRs to find the reason for Malfunction Alert.   Mahesh J Salgaonkar
• [Skiboot] [PATCH v2 3/3] opal: Check NX FIRs to find the reason for Malfunction Alert.   Mahesh J Salgaonkar
• [Skiboot] [PATCH 00/11] add DTS support for cores and memory buffers   Cédric Le Goater
• [Skiboot] [PATCH 01/11] core: add a platform op to read sensors   Cédric Le Goater
• [Skiboot] [PATCH 02/11] dts: add support to read the core temperatures   Cédric Le Goater
• [Skiboot] [PATCH 03/11] dts: add device tree nodes for the core temperatures   Cédric Le Goater
• [Skiboot] [PATCH 04/11] spcn: add definitions for the PRS command and modifiers   Cédric Le Goater
• [Skiboot] [PATCH 05/11] fsp-sensor: rework device tree for sensors   Cédric Le Goater
• [Skiboot] [PATCH 06/11] fsp-sensor: add a status property   Cédric Le Goater
• [Skiboot] [PATCH 07/11] sensor: add a type property   Cédric Le Goater
• [Skiboot] [PATCH 08/11] dts: add some extra properties to improve the driver   Cédric Le Goater
• [Skiboot] [PATCH 09/11] fsp-sensor: cleanup unused code   Cédric Le Goater
• [Skiboot] [PATCH 0/2] add DTS support (linux side)   Cédric Le Goater
• [Skiboot] [PATCH 1/2] powerpc/powernv: handle OPAL_SUCCESS return in opal_sensor_read   Cédric Le Goater
• [Skiboot] [PATCH 2/2] hwmon: (ibmpowernv) add DTS support   Cédric Le Goater
• [Skiboot] [PATCH 00/22] Enable LED OPAL interface   Vasant Hegde
• [Skiboot] [PATCH 01/22] FSP/LEDS: Fix coding style issue   Vasant Hegde
• [Skiboot] [PATCH 02/22] FSP/LEDS: Remove duplicate fsp_msg allocation   Vasant Hegde
• [Skiboot] [PATCH 03/22] FSP/LEDS: Fix memory leak in error handling path   Vasant Hegde
• [Skiboot] [PATCH 04/22] FSP/LEDS: Remove unnecessary header files   Vasant Hegde
• [Skiboot] [PATCH 05/22] FSP/LEDS: Remove unnecessary forward declaration   Vasant Hegde
• [Skiboot] [PATCH 06/22] FSP/LEDS: Check for FSP presence   Vasant Hegde
• [Skiboot] [PATCH 07/22] FSP/LEDS: Use consistent prefix   Vasant Hegde
• [Skiboot] [PATCH 08/22] FSP/LEDS: Do not expose driver specific functions   Vasant Hegde
• [Skiboot] [PATCH 09/22] FSP/LEDS: Remove redundant variable declaration   Vasant Hegde
• [Skiboot] [PATCH 10/22] FSP/LEDS: Validate fsp msg allocation   Vasant Hegde
• [Skiboot] [PATCH 11/22] FSP/LEDS: Check FSP response status   Vasant Hegde
• [Skiboot] [PATCH 12/22] FSP/LEDS: Remove redundant log message   Vasant Hegde
• [Skiboot] [PATCH 13/22] FSP/LEDS: Track LED list read status   Vasant Hegde
• [Skiboot] [PATCH 14/22] FSP/LEDS: Add device tree nodes   Vasant Hegde
• [Skiboot] [PATCH 15/22] FSP/LEDS: Implement a set LED SPCN command queue   Vasant Hegde
• [Skiboot] [PATCH 16/22] FSP/LEDS: Move checkpoint status variable to led_set_cmd structure   Vasant Hegde
• [Skiboot] [PATCH 17/22] FSP/LEDS: Modify handling of SPCN based LED commands   Vasant Hegde
• [Skiboot] [PATCH 18/22] FSP/LEDS: Serialize the entire LED state change code and it's callback   Vasant Hegde
• [Skiboot] [PATCH 19/22] FSP/LEDS: Roll back LED state update in case FSP command queuing fails   Vasant Hegde
• [Skiboot] [PATCH 20/22] FSP/LEDS: Handle failure cases in set LED MBOX command   Vasant Hegde
• [Skiboot] [PATCH 21/22] FSP/LEDS: Add OPAL interfaces for accessing or modifying the LED states   Vasant Hegde
• [Skiboot] [PATCH 22/22] FSP/LEDS: Roll back exclusive bit in case FSP command queuing fails   Vasant Hegde
• [Skiboot] [kernel PATCH 1/2] powerpc/powernv: Add OPAL interfaces for accessing and modifying system LED states   Vasant Hegde
• [Skiboot] [PATCH 2/2] leds/powernv: Add driver for PowerNV platform   Vasant Hegde
• [Skiboot] [PATCH] PSI: Report a PEL for PSI timeout   Ananth N Mavinakayanahalli
• [Skiboot] [PATCH] PSI: Report a PEL for PSI timeout   Vasant Hegde
• [Skiboot] [PATCH] PSI: Report a PEL for PSI timeout   Ananth N Mavinakayanahalli
• [Skiboot] [PATCHv2] add nx-842 coproc support   Dan Streetman
• [Skiboot] [PATCH V2 1/2] PSI: Report a PEL for PSI timeout   Ananth N Mavinakayanahalli
• [Skiboot] [PATCH V2 2/2] PSI: Revert the timeout for PSI link recovery to architected value   Ananth N Mavinakayanahalli
• [Skiboot] [PATCH V2 1/2] PSI: Report a PEL for PSI timeout   Vasant Hegde
• [Skiboot] [PATCH 00/22] Enable LED OPAL interface   Stewart Smith
• [Skiboot] [PATCH 00/22] Enable LED OPAL interface   Vasant Hegde
• [Skiboot] [PATCH] Fix commit 16c80346   Jeremy Kerr
• [Skiboot] [RFC,PATCH 1/3] core/flash: Add flash API   Jeremy Kerr
• [Skiboot] [RFC, PATCH 2/3] core/flash: port pnor_load_resource to flash code   Jeremy Kerr
• [Skiboot] [RFC, PATCH 3/3] core/flash: Move flash NVRAM handling to new flash module   Jeremy Kerr
• [Skiboot] [PATCH] Fix commit 16c80346   Stewart Smith
• [Skiboot] [RFC,PATCH 1/3] core/flash: Add flash API   Joel Stanley
• [Skiboot] [RFC, PATCH 2/3] core/flash: port pnor_load_resource to flash code   Joel Stanley
• [Skiboot] [PATCH 0/2] add DTS support (linux side)   Stewart Smith
• [Skiboot] [RFC,PATCH 1/3] core/flash: Add flash API   Joel Stanley
• [Skiboot] [RFC, PATCH 3/3] core/flash: Move flash NVRAM handling to new flash module   Joel Stanley
• [Skiboot] [RFC,PATCH 1/3] core/flash: Add flash API   Jeremy Kerr
• [Skiboot] [RFC,PATCH 1/3] core/flash: Add flash API   Stewart Smith
• [Skiboot] [RFC,PATCH 1/3] core/flash: Add flash API   Jeremy Kerr
• [Skiboot] [PATCH 4/5] ipmi: Message Linux to perform graceful shutdown   Vasant Hegde
• [Skiboot] [PATCH 4/5] ipmi: Message Linux to perform graceful shutdown   Stewart Smith
• [Skiboot] [PATCH 00/10] Replace abort() with assert() where possible   Ananth N Mavinakayanahalli
• [Skiboot] [PATCH 01/10] mem-region: Change aborts to asserts   Ananth N Mavinakayanahalli
• [Skiboot] [PATCH 02/10] cpu: Change abort to assert   Ananth N Mavinakayanahalli
• [Skiboot] [PATCH 03/10] hostservices: Change abort to assert   Ananth N Mavinakayanahalli
• [Skiboot] [PATCH 04/10] device: Change aborts to asserts   Ananth N Mavinakayanahalli
• [Skiboot] [PATCH 05/10] init: Change aborts to asserts   Ananth N Mavinakayanahalli
• [Skiboot] [PATCH 06/10] lock: Change abort to assert   Ananth N Mavinakayanahalli
• [Skiboot] [PATCH 07/10] opal: Change abort to assert   Ananth N Mavinakayanahalli
• [Skiboot] [PATCH 08/10] interrupts: Change abort to assert   Ananth N Mavinakayanahalli
• [Skiboot] [PATCH 09/10] hdata: Change abort to assert   Ananth N Mavinakayanahalli
• [Skiboot] [PATCH 10/10] chiptod: Change aborts to asserts   Ananth N Mavinakayanahalli
• [Skiboot] [PATCH 00/10] Replace abort() with assert() where possible   Vasant Hegde
• [Skiboot] [PATCH] Make abort() update sp attn area (like assert does)   Stewart Smith
• [Skiboot] [PATCH] Make abort() update sp attn area (like assert does)   Ananth N Mavinakayanahalli
• [Skiboot] [PATCH] Make abort() update sp attn area (like assert does)   Stewart Smith
• [Skiboot] [PATCH 1/2] include: Add PRD message definition   Neelesh Gupta
• [Skiboot] [PATCH 2/2] prd: PRD framework   Neelesh Gupta
• [Skiboot] [PATCH v2 1/2] include: Add PRD message definition   Neelesh Gupta
• [Skiboot] [PATCH v2 2/2] prd: PRD framework   Neelesh Gupta
• [Skiboot] [PATCH v2 1/2] include: Add PRD message definition   Stewart Smith
• [Skiboot] [PATCH 01/10] Add files to .gitignore   Michael Neuling
• [Skiboot] [PATCH 02/10] Use LOCK_UNLOCKED macro to in init_lock()   Michael Neuling
• [Skiboot] [PATCH 03/10] core: Add load_resource()   Michael Neuling
• [Skiboot] [PATCH 04/10] core: Add subid to load_resource()   Michael Neuling
• [Skiboot] [PATCH 05/10] hw: Create xscom_read_cfam_chipid()   Michael Neuling
• [Skiboot] [PATCH 06/10] capi: Add CAPI microcode read to load_resource()   Michael Neuling
• [Skiboot] [PATCH 07/10] capi: Dynamically calculate which CAPP port to use   Michael Neuling
• [Skiboot] [PATCH 08/10] capi: Move code around   Michael Neuling
• [Skiboot] [PATCH 09/10] capi: Make microcode lid parsing code endian safe   Michael Neuling
• [Skiboot] [PATCH 10/10] capi: Rework microcode flash download and CAPP upload   Michael Neuling
• [Skiboot] [PATCH v2 1/2] include: Add PRD message definition   Neelesh Gupta
• [Skiboot] [PATCH v2 2/2] prd: PRD framework   Stewart Smith
• [Skiboot] [PATCH v2] opal: Do not overwrite same HMI event for multiple HMI errors.   Stewart Smith
• [Skiboot] [PATCH v2 1/2] include: Add PRD message definition   Joel Stanley
• [Skiboot] [PATCH v2] opal: Do not overwrite same HMI event for multiple HMI errors.   Mahesh Jagannath Salgaonkar
• [Skiboot] [PATCH v3] opal: Do not overwrite same HMI event for multiple HMI errors.   Mahesh J Salgaonkar
• [Skiboot] [PATCH v2 2/2] prd: PRD framework   Neelesh Gupta
• [Skiboot] [PATCH v2 2/3] opal: Check Core FIRs to find the reason for Malfunction Alert.   Stewart Smith
• [Skiboot] [PATCH v2 2/2] prd: PRD framework   Benjamin Herrenschmidt
• [Skiboot] [PATCH v2 2/2] prd: PRD framework   Benjamin Herrenschmidt
• [Skiboot] [PATCH v2 2/2] prd: PRD framework   Jeremy Kerr
• [Skiboot] [PATCH v2 2/2] prd: PRD framework   Benjamin Herrenschmidt
• [Skiboot] [PATCH v2 1/2] include: Add PRD message definition   Stewart Smith
• [Skiboot] [PATCH v2 2/2] prd: PRD framework   Stewart Smith
• [Skiboot] [PATCH 01/11] core: add a platform op to read sensors   Stewart Smith
• [Skiboot] [PATCH 14/22] FSP/LEDS: Add device tree nodes   Ananth N Mavinakayanahalli
• [Skiboot] [PATCH v2 2/3] opal: Check Core FIRs to find the reason for Malfunction Alert.   Mahesh Jagannath Salgaonkar
• [Skiboot] [PATCH v2 2/2] prd: PRD framework   Benjamin Herrenschmidt
• [Skiboot] [PATCH 02/11] dts: add support to read the core temperatures   Stewart Smith
• [Skiboot] [PATCH 05/11] fsp-sensor: rework device tree for sensors   Stewart Smith
• [Skiboot] [PATCH 03/11] dts: add device tree nodes for the core temperatures   Stewart Smith
• [Skiboot] [PATCH 06/11] fsp-sensor: add a status property   Stewart Smith
• [Skiboot] [PATCH 07/11] sensor: add a type property   Stewart Smith
• [Skiboot] [PATCH 1/2] p8/i2c: Add OPAL properties in the i2c bus nodes   Neelesh Gupta
• [Skiboot] [PATCH 2/2] Document the device-tree entries of I2C.   Neelesh Gupta
• [Skiboot] [PATCH 1/2] p8/i2c: Add OPAL properties in the i2c bus nodes   Neelesh Gupta
• [Skiboot] [PATCH 14/22] FSP/LEDS: Add device tree nodes   Vasant Hegde
• [Skiboot] [PATCH 1/2] p8/i2c: Add OPAL properties in the i2c bus nodes   Neelesh Gupta
• [Skiboot] opal-prd Makefile hacks   Benjamin Herrenschmidt
• [Skiboot] opal-prd Makefile hacks   Jeremy Kerr
• [Skiboot] opal-prd Makefile hacks   Benjamin Herrenschmidt
• [Skiboot] opal-prd Makefile hacks   Jeremy Kerr
• [Skiboot] opal-prd Makefile hacks   Stewart Smith
• [Skiboot] [PATCH v2 2/3] opal: Check Core FIRs to find the reason for Malfunction Alert.   Stewart Smith
• [Skiboot] [PATCH 1/2] include: Add PRD message definition   Stewart Smith
• [Skiboot] [PATCH 14/22] FSP/LEDS: Add device tree nodes   Stewart Smith
• [Skiboot] [PATCH 1/2] include: Add PRD message definition   Benjamin Herrenschmidt
• [Skiboot] [PATCH 1/2] include: Add PRD message definition   Jeremy Kerr
• [Skiboot] [PATCH 1/3] timebase: Add nanosleep_nopoll   Ananth N Mavinakayanahalli
• [Skiboot] [PATCH 2/3] hostservices: Don't run pollers from hostservices callbacks   Ananth N Mavinakayanahalli
• [Skiboot] [PATCH 3/3] ... to prevent any potential poller recursions during lid load.   Ananth N Mavinakayanahalli
• [Skiboot] [PATCH 3/3] [Resend] hostservices: Cache lids prior to first load request   Ananth N Mavinakayanahalli
• [Skiboot] [PATCH 3/3] ... to prevent any potential poller recursions during lid load.   Vasant Hegde
• [Skiboot] [PATCH 3/3] ... to prevent any potential poller recursions during lid load.   Ananth N Mavinakayanahalli
• [Skiboot] [PATCH V2 1/3] timebase: Add nanosleep_nopoll   Ananth N Mavinakayanahalli
• [Skiboot] [PATCH V2 2/3] hostservices: Don't run pollers from hostservices callbacks   Ananth N Mavinakayanahalli
• [Skiboot] [PATCH V2 3/3] hostservices: Cache lids prior to first load request   Ananth N Mavinakayanahalli
• [Skiboot] [PATCH 0/2] add DTS support (linux side)   Cedric Le Goater
• [Skiboot] [PATCH 01/11] core: add a platform op to read sensors   Cedric Le Goater
• [Skiboot] [PATCH 05/11] fsp-sensor: rework device tree for sensors   Cedric Le Goater
• [Skiboot] [PATCH 02/11] dts: add support to read the core temperatures   Cedric Le Goater
• [Skiboot] [PATCH 03/11] dts: add device tree nodes for the core temperatures   Cedric Le Goater
• [Skiboot] [PATCH 06/11] fsp-sensor: add a status property   Cedric Le Goater
• [Skiboot] [PATCH 07/11] sensor: add a type property   Cedric Le Goater
• [Skiboot] [PATCH 10/11] document ibm, opal/sensors/ device tree nodes   Cédric Le Goater
• [Skiboot] [PATCH 11/11] dts: add memory buffers temperature sensors   Cédric Le Goater
• [Skiboot] [PATCH 1/3] timebase: Add nanosleep_nopoll   Benjamin Herrenschmidt
• [Skiboot] [PATCH 2/3] hostservices: Don't run pollers from hostservices callbacks   Benjamin Herrenschmidt
• [Skiboot] [PATCH 3/3] ... to prevent any potential poller recursions during lid load.   Benjamin Herrenschmidt
• [Skiboot] [PATCH 1/2] include: Add PRD message definition   Stewart Smith
• [Skiboot] Dealing with linux side patches   Stewart Smith
• [Skiboot] [PATCH 01/11] core: add a platform op to read sensors   Stewart Smith
• [Skiboot] [PATCH 03/11] dts: add device tree nodes for the core temperatures   Stewart Smith
• [Skiboot] [PATCH] occ: Fix potential race when clearing occ interrupt status   Jeremy Kerr
• [Skiboot] [PATCH] occ: Fix potential race when clearing occ interrupt status   Benjamin Herrenschmidt
• [Skiboot] [PATCH] bt: Cleanup bt state machine and fix SMS_ATN bug   Alistair Popple
• [Skiboot] [PATCH 1/2] p8/i2c: Add OPAL properties in the i2c bus nodes   Stewart Smith
• [Skiboot] [PATCH] bt: Cleanup bt state machine and fix SMS_ATN bug   Alistair Popple
• [Skiboot] [PATCH 3/3] ... to prevent any potential poller recursions during lid load.   Ananth N Mavinakayanahalli
• [Skiboot] [PATCH 1/2] p8/i2c: Add OPAL properties in the i2c bus nodes   Benjamin Herrenschmidt
• [Skiboot] [PATCH 1/3 v2] core/flash: Add flash API   Jeremy Kerr
• [Skiboot] [PATCH 2/3 v2] core/flash: port pnor_load_resource to flash code   Jeremy Kerr
• [Skiboot] [PATCH 3/3 v2] core/flash: Move flash NVRAM handling to new flash module   Jeremy Kerr
• [Skiboot] [PATCH 14/22] FSP/LEDS: Add device tree nodes   Vasant Hegde
• [Skiboot] [PATCH 3/3] ... to prevent any potential poller recursions during lid load.   Ananth N Mavinakayanahalli
• [Skiboot] [PATCH v4 00/10] PCI Slot Management   Gavin Shan
• [Skiboot] [PATCH v4 01/10] core/pci: Allow iteration on specified devices   Gavin Shan
• [Skiboot] [PATCH v4 02/10] core/pci: PCI slot management core   Gavin Shan
• [Skiboot] [PATCH v4 03/10] hw/p5ioc: PHB slot   Gavin Shan
• [Skiboot] [PATCH v4 04/10] hw/p7ioc: PHB slot   Gavin Shan
• [Skiboot] [PATCH v4 05/10] hw/phb3: PHB slot   Gavin Shan
• [Skiboot] [PATCH v4 06/10] platforms/ibm-fsp: Refactor PCI stuff   Gavin Shan
• [Skiboot] [PATCH v4 07/10] core/pci: PCI slot   Gavin Shan
• [Skiboot] [PATCH v4 08/10] core/opal: Switch to PCI slot   Gavin Shan
• [Skiboot] [PATCH v4 09/10] PCI: Reinitialize devices on slot reset   Gavin Shan
• [Skiboot] [PATCH v4 10/10] doc: PCI slot   Gavin Shan
• [Skiboot] [PATCH 3/3] ... to prevent any potential poller recursions during lid load.   Benjamin Herrenschmidt
• [Skiboot] [PATCH 1/3] powerpc/powernv: Move OPAL API definitions to opal-api.h   Michael Ellerman
• [Skiboot] [PATCH 2/3] powerpc/powernv: Move opal-api.h closer to the Skiboot version   Michael Ellerman
• [Skiboot] [RFC PATCH 3/3] powerpc/powernv: Remove unused definitions in opal-api.h   Michael Ellerman
• [Skiboot] [PATCH v2] occ: Fix potential race when clearing occ interrupt status   Jeremy Kerr
• [Skiboot] [PATCH 0/5] Update SET/GETFIELD, support nx-842   Dan Streetman
• [Skiboot] [PATCH 1/5] simplify GET/SETFIELD() use, add MASK_TO_LSH()   Dan Streetman
• [Skiboot] [PATCH 2/5] Change user-defined _MASK/_LSH to just mask   Dan Streetman
• [Skiboot] [PATCH 3/5] update users of GET/SETFIELD()   Dan Streetman
• [Skiboot] [PATCH 4/5] change direct use of LSH to SETFIELD   Dan Streetman
• [Skiboot] [PATCHv3 5/5] add nx-842 coproc support   Dan Streetman
• [Skiboot] [PATCH 16/22] FSP/LEDS: Move checkpoint status variable to led_set_cmd structure   Stewart Smith
• [Skiboot] [PATCH 1/5] simplify GET/SETFIELD() use, add MASK_TO_LSH()   Benjamin Herrenschmidt
• [Skiboot] [PATCH 1/5] simplify GET/SETFIELD() use, add MASK_TO_LSH()   Dan Streetman
• [Skiboot] [PATCH 1/3] powerpc/powernv: Move OPAL API definitions to opal-api.h   Stewart Smith
• [Skiboot] [PATCH 2/3] powerpc/powernv: Move opal-api.h closer to the Skiboot version   Stewart Smith
• [Skiboot] [RFC PATCH 3/3] powerpc/powernv: Remove unused definitions in opal-api.h   Stewart Smith
• [Skiboot] [PATCH 1/5] simplify GET/SETFIELD() use, add MASK_TO_LSH()   Dan Streetman
• [Skiboot] [PATCH 1/5] simplify GET/SETFIELD() use, add MASK_TO_LSH()   Dan Streetman
• [Skiboot] [PATCH 21/22] FSP/LEDS: Add OPAL interfaces for accessing or modifying the LED states   Stewart Smith
• [Skiboot] [PATCH 1/3 v2] core/flash: Add flash API   Stewart Smith
• [Skiboot] [PATCH v4 08/10] core/opal: Switch to PCI slot   Stewart Smith
• [Skiboot] [PATCH v4 08/10] core/opal: Switch to PCI slot   Gavin Shan
• [Skiboot] [PATCH 01/13] Always create opal-interrupts property   Benjamin Herrenschmidt
• [Skiboot] [PATCH 02/13] lock: Add lock depth recording per CPU   Benjamin Herrenschmidt
• [Skiboot] [PATCH 03/13] Warn when pollers are called with a lock held   Benjamin Herrenschmidt
• [Skiboot] [PATCH 04/13] Don't run pollers in time_wait() when a lock is held   Benjamin Herrenschmidt
• [Skiboot] [PATCH 05/13] fsp: Audit callers of opal_run_pollers   Benjamin Herrenschmidt
• [Skiboot] [PATCH 06/13] i2c: Turn large time_wait_ms() into states   Benjamin Herrenschmidt
• [Skiboot] [PATCH 07/13] cpu: Don't hold lock while waiting   Benjamin Herrenschmidt
• [Skiboot] [PATCH 08/13] fsp/console: Don't time_wait with lock held   Benjamin Herrenschmidt
• [Skiboot] [PATCH 09/13] pci: Remove pci_lock   Benjamin Herrenschmidt
• [Skiboot] [PATCH 10/13] phb3: Reduce some time_wait occurrences   Benjamin Herrenschmidt
• [Skiboot] [PATCH 11/13] chiptod: Remove fallback to master CPU   Benjamin Herrenschmidt
• [Skiboot] [PATCH 12/13] Replace is_mambo_chip with a better chip quirk mechanism   Benjamin Herrenschmidt
• [Skiboot] [PATCH 13/13] pci: Don't hang if we have only one CPU   Benjamin Herrenschmidt
• [Skiboot] FSP code calling pollers with locks held   Stewart Smith
• [Skiboot] FSP code calling pollers with locks held   Benjamin Herrenschmidt
• [Skiboot] [PATCH 04/13] Don't run pollers in time_wait() when a lock is held   Cedric Le Goater
• [Skiboot] [PATCH 2/5] Change user-defined _MASK/_LSH to just mask   Dan Streetman
• [Skiboot] [PATCH 04/13] Don't run pollers in time_wait() when a lock is held   Benjamin Herrenschmidt
• [Skiboot] [PATCH 0/3 v3] skiboot flash layer implementation & API   Jeremy Kerr
• [Skiboot] [PATCH 1/3 v3] core/flash: Add flash API   Jeremy Kerr
• [Skiboot] [PATCH 2/3 v3] core/flash: port pnor_load_resource to flash code   Jeremy Kerr
• [Skiboot] [PATCH 3/3 v3] core/flash: Move flash NVRAM handling to new flash module   Jeremy Kerr
• [Skiboot] [PATCH] hostservices: Fix lid load   Ananth N Mavinakayanahalli
• [Skiboot] [PATCH 1/2] bt: Cleanup bt state machine and fix SMS_ATN bug   Alistair Popple
• [Skiboot] [PATCH 2/2] ipmi: Fix locking for synchronous message sending   Alistair Popple
• [Skiboot] [PATCH v4 08/10] core/opal: Switch to PCI slot   Stewart Smith
• [Skiboot] [PATCH 04/13] Don't run pollers in time_wait() when a lock is held   Cedric Le Goater
• [Skiboot] [PATCH 04/13] Don't run pollers in time_wait() when a lock is held   Stewart Smith
• [Skiboot] [PATCH 04/13] Don't run pollers in time_wait() when a lock is held   Cedric Le Goater
• [Skiboot] [PATCH] hostservices: Fix lid load   Ananth N Mavinakayanahalli
• [Skiboot] [PATCH 1/3] hostservices: Fix lid load   Ananth N Mavinakayanahalli
• [Skiboot] [PATCH 2/3] OCC/hostservices: Queue pre-preload HBRT lid load requests   Ananth N Mavinakayanahalli
• [Skiboot] [PATCH 3/3] hostservices/fsp: Move lid caching to platform   Ananth N Mavinakayanahalli
• [Skiboot] [PATCH 01/16] Makefile: Make "make --silient" make make momentarily much more muted   Michael Neuling
• [Skiboot] [PATCH 02/16] Makefile: Link with libgcc   Michael Neuling
• [Skiboot] [PATCH 03/16] libffs: Add comment for to clarify endian requirments   Michael Neuling
• [Skiboot] [PATCH 04/16] flash: Add newlines on prints   Michael Neuling
• [Skiboot] [PATCH 05/16] flash: Fix bugs for sub-partitions in flash_load_resource()   Michael Neuling
• [Skiboot] [PATCH 06/16] hw: Create xscom_read_cfam_chipid()   Michael Neuling
• [Skiboot] [PATCH 07/16] libffs: Add ECC checking code   Michael Neuling
• [Skiboot] [PATCH 08/16] libffs: Add ffs_entry_user field   Michael Neuling
• [Skiboot] [PATCH 09/16] libffs: Add ecc parameter on ffs_part_info()   Michael Neuling
• [Skiboot] [PATCH 10/16] libffs: Add ffs_flash_read()   Michael Neuling
• [Skiboot] [PATCH 11/16] flash: Add ECC to load_resource()   Michael Neuling
• [Skiboot] [PATCH 12/16] capi: Add CAPI microcode read to load_resource()   Michael Neuling
• [Skiboot] [PATCH 13/16] capi: Dynamically calculate which CAPP port to use   Michael Neuling
• [Skiboot] [PATCH 14/16] capi: Move code around   Michael Neuling
• [Skiboot] [PATCH 15/16] capi: Make microcode lid parsing code endian safe   Michael Neuling
• [Skiboot] [PATCH 16/16] capi: Rework microcode flash download and CAPP upload   Michael Neuling
• [Skiboot] [PATCH 05/16] flash: Fix bugs for sub-partitions in flash_load_resource()   Jeremy Kerr
• [Skiboot] [PATCH 0/3] libc/stdlib tests   Daniel Axtens
• [Skiboot] [PATCH 1/3] Test libc stdlib functions (atoi/strtol and friends)   Daniel Axtens
• [Skiboot] [PATCH 2/3] Don't recognise a double hex prefix (0x0xNN) as valid.   Daniel Axtens
• [Skiboot] [PATCH 3/3] atoi/atol should assume base 10, not autodetect base.   Daniel Axtens
• [Skiboot] [PATCH 3/3] atoi/atol should assume base 10, not autodetect base.   Cyril Bur
• [Skiboot] [PATCH 2/3] Don't recognise a double hex prefix (0x0xNN) as valid.   Cyril Bur
• [Skiboot] [PATCH 1/3] Test libc stdlib functions (atoi/strtol and friends)   Cyril Bur
• [Skiboot] [PATCH 10/16] libffs: Add ffs_flash_read()   Joel Stanley
• [Skiboot] [PATCH 10/16] libffs: Add ffs_flash_read()   Michael Neuling
• [Skiboot] [PATCH 10/16] libffs: Add ffs_flash_read()   Benjamin Herrenschmidt
• [Skiboot] [PATCH 11/16] flash: Add ECC to load_resource()   Joel Stanley
• [Skiboot] [PATCH 11/16] flash: Add ECC to load_resource()   Michael Neuling
• [Skiboot] [PATCH 1/2] bt: Improve error messages   Alistair Popple
• [Skiboot] [PATCH 2/2] bt: Minor locking fix for bt_get_resp()   Alistair Popple
• [Skiboot] [PATCH v2 00/13] add DTS support for cores and memory buffers   Cédric Le Goater
• [Skiboot] [PATCH v2 01/13] core: add a platform op to read sensors   Cédric Le Goater
• [Skiboot] [PATCH v2 02/13] dts: add support to read the core temperatures   Cédric Le Goater
• [Skiboot] [PATCH v2 03/13] dts: add device tree nodes for the core temperatures   Cédric Le Goater
• [Skiboot] [PATCH v2 04/13] spcn: add definitions for the PRS command and modifiers   Cédric Le Goater
• [Skiboot] [PATCH v2 05/13] fsp-sensor: rework device tree for sensors   Cédric Le Goater
• [Skiboot] [PATCH v2 06/13] fsp-sensor: add a status property   Cédric Le Goater
• [Skiboot] [PATCH v2 07/13] sensor: add a type property   Cédric Le Goater
• [Skiboot] [PATCH v2 08/13] dts: add some extra properties to improve the driver   Cédric Le Goater
• [Skiboot] [PATCH v2 09/13] fsp-sensor: cleanup unused code   Cédric Le Goater
• [Skiboot] [PATCH v2 10/13] sensor: add device tree documentation   Cédric Le Goater
• [Skiboot] [PATCH v2 11/13] dts: add memory buffers temperature sensors   Cédric Le Goater
• [Skiboot] [PATCH v2 12/13] sensor: add documentation for the OPAL_SENSOR_READ call   Cédric Le Goater
• [Skiboot] [PATCH v2 13/13] sensor: return OPAL_UNSUPPORTED when no sensors are supported   Cédric Le Goater
• [Skiboot] [RFC PATCH 0/3] hwmon: (ibmpowernv) add DTS support   Cédric Le Goater
• [Skiboot] [RFC PATCH 1/3] powerpc/powernv: Check OPAL sensor calls exist   Cédric Le Goater
• [Skiboot] [RFC PATCH 2/3] powerpc/powernv: handle OPAL_SUCCESS return in opal_sensor_read   Cédric Le Goater
• [Skiboot] [RFC PATCH 3/3] hwmon: (ibmpowernv) add DTS support   Cédric Le Goater
• [Skiboot] [RFC PATCH 0/3] hwmon: (ibmpowernv) add DTS support   Guenter Roeck
• [Skiboot] [RFC PATCH 1/3] powerpc/powernv: Check OPAL sensor calls exist   Guenter Roeck
• [Skiboot] [RFC PATCH 0/3] hwmon: (ibmpowernv) add DTS support   Cedric Le Goater
• [Skiboot] [RFC PATCH 1/3] powerpc/powernv: Check OPAL sensor calls exist   Cedric Le Goater
• [Skiboot] [RFC PATCH 0/3] hwmon: (ibmpowernv) add DTS support   Guenter Roeck
• [Skiboot] [RFC PATCH 0/3] hwmon: (ibmpowernv) add DTS support   Cedric Le Goater
• [Skiboot] [RFC PATCH 0/3] hwmon: (ibmpowernv) add DTS support   Guenter Roeck
• [Skiboot] [PATCH] core/flash: Don't clobber rc in error path   Joel Stanley
• [Skiboot] [RFC, PATCH] libflash: Provide an internal parity implementation, to remove libgcc dependency   Jeremy Kerr
• [Skiboot] [RFC, PATCH] libflash: Provide an internal parity implementation, to remove libgcc dependency   Jeremy Kerr
• [Skiboot] [PATCH] libflash: Use FL_* logging functions   Jeremy Kerr
• [Skiboot] [RFC PATCH 0/3] hwmon: (ibmpowernv) add DTS support   Cedric Le Goater
• [Skiboot] [PATCH] flash: fix return value of flash_find_subpartition()   Cédric Le Goater
• [Skiboot] [PATCH] libflash: Use FL_* logging functions   Michael Neuling
• [Skiboot] [PATCH] libflash: Use FL_* logging functions   Jeremy Kerr
• [Skiboot] [PATCH 0/4] External-libflash fixes for ecc support   Jeremy Kerr
• [Skiboot] [PATCH 1/4] libflash: move ecc.h into libflash/   Jeremy Kerr
• [Skiboot] [PATCH 2/4] libflash: Remove dependencies on skiboot.h header   Jeremy Kerr
• [Skiboot] [PATCH 3/4] libflash: external FL_* macros require stdio   Jeremy Kerr
• [Skiboot] [PATCH 4/4] external/pflash: libflash needs ecc.o   Jeremy Kerr
• [Skiboot] [RFC PATCH 1/3] powerpc/powernv: Check OPAL sensor calls exist   Michael Ellerman
• [Skiboot] [PATCH] libflash: move ffs_flash_read into libflash   Jeremy Kerr
• [Skiboot] [PATCH] memboot: Add a memboot flash backend   Alistair Popple
• [Skiboot] [PATCH] memboot: Add a memboot flash backend   Benjamin Herrenschmidt
• [Skiboot] [PATCH 00/25] sparse cleanups   Cédric Le Goater
• [Skiboot] [PATCH 01/25] sparse: add make variable C to run sparse when compiling skiboot   Cédric Le Goater
• [Skiboot] [PATCH 02/25] sparse: MEMCONS_MAGIC is a long   Cédric Le Goater
• [Skiboot] [PATCH 03/25] sparse: declare proc_chip_quirks as extern   Cédric Le Goater
• [Skiboot] [PATCH 04/25] sparse: fix fonction declarations   Cédric Le Goater
• [Skiboot] [PATCH 05/25] sparse: fix function argument test   Cédric Le Goater
• [Skiboot] [PATCH 06/25] sparse: declare platform as extern   Cédric Le Goater
• [Skiboot] [PATCH 07/25] sparse: hbrt_memcons can be static   Cédric Le Goater
• [Skiboot] [PATCH 08/25] sparse: declare opal_err_info as static   Cédric Le Goater
• [Skiboot] [PATCH 09/25] sparse: hmi_lock can be static   Cédric Le Goater
• [Skiboot] [PATCH 10/25] sparse: psi_link_poll_active can be static   Cédric Le Goater
• [Skiboot] [PATCH 11/25] sparse: state_str is unused   Cédric Le Goater
• [Skiboot] [PATCH 12/25] sparse: fake_ymd and fake_hmsm can be static   Cédric Le Goater
• [Skiboot] [PATCH 13/25] sparse: rtc_tod_state and rtc_tod_cache_dirty and be static   Cédric Le Goater
• [Skiboot] [PATCH 14/25] sparse: fix fsp_fillmsg definition   Cédric Le Goater
• [Skiboot] [PATCH 15/25] sparse: led_support can be static   Cédric Le Goater
• [Skiboot] [PATCH 16/25] sparse: elog_write_to_host_head_state can be static   Cédric Le Goater
• [Skiboot] [PATCH 17/25] sparse: epow_status can be static   Cédric Le Goater
• [Skiboot] [PATCH 18/25] sparse: fsp_dpo_init_tb can be static   Cédric Le Goater
• [Skiboot] [PATCH 19/25] sparse: libflash_debug is unused   Cédric Le Goater
• [Skiboot] [PATCH 20/25] sparse: declare errno   Cédric Le Goater
• [Skiboot] [PATCH 21/25] sparse: declare reboot_in_progress   Cédric Le Goater
• [Skiboot] [PATCH 22/25] sparse: bt_backend can be static   Cédric Le Goater
• [Skiboot] [PATCH 23/25] sparse: fix Using plain integer as NULL pointer warning   Cédric Le Goater
• [Skiboot] [PATCH 24/25] sparse: fix declaration of fdt_strerror   Cédric Le Goater
• [Skiboot] [PATCH 25/25] sparse: fix libc declarations   Cédric Le Goater
• [Skiboot] [PATCH 15/25] sparse: led_support can be static   Vasant Hegde
• [Skiboot] [PATCH 16/25] sparse: elog_write_to_host_head_state can be static   Vasant Hegde
• [Skiboot] [PATCH 17/25] sparse: epow_status can be static   Vasant Hegde
• [Skiboot] [PATCH 18/25] sparse: fsp_dpo_init_tb can be static   Vasant Hegde
• [Skiboot] [PATCH 13/25] sparse: rtc_tod_state and rtc_tod_cache_dirty and be static   Vasant Hegde
• [Skiboot] [PATCH 14/25] sparse: fix fsp_fillmsg definition   Vasant Hegde
• [Skiboot] [PATCH 10/25] sparse: psi_link_poll_active can be static   Vasant Hegde
• [Skiboot] [PATCH 08/25] sparse: declare opal_err_info as static   Vasant Hegde
• [Skiboot] [PATCH 05/25] sparse: fix function argument test   Vasant Hegde
• [Skiboot] [PATCH 05/25] sparse: fix function argument test   Cedric Le Goater
• [Skiboot] [PATCH] memboot: Add a memboot flash backend   Alistair Popple
• [Skiboot] [PATCH 19/25] sparse: libflash_debug is unused   Joel Stanley
• [Skiboot] [PATCH 3/4] libflash: external FL_* macros require stdio   Joel Stanley
• [Skiboot] [PATCH 4/4] external/pflash: libflash needs ecc.o   Joel Stanley
• [Skiboot] [PATCH 1/4] libflash: move ecc.h into libflash/   Joel Stanley
• [Skiboot] [PATCH 2/4] libflash: Remove dependencies on skiboot.h header   Joel Stanley
• [Skiboot] [PATCH] libflash: move ffs_flash_read into libflash   Joel Stanley
• [Skiboot] GCOV for skiboot   Stewart Smith
• [Skiboot] [PATCH v2 19/25] sparse: libflash_debug is unused   Cédric Le Goater
• [Skiboot] [RFC PATCH 1/3] powerpc/powernv: Check OPAL sensor calls exist   Cedric Le Goater
• [Skiboot] [PATCH v2] libflash: move ffs_flash_read into libflash   Jeremy Kerr
• [Skiboot] [PATCH 0/4] core/device.c tests   Daniel Axtens
• [Skiboot] [PATCH 1/4] core/test: Test that device paths/names function as expected.   Daniel Axtens
• [Skiboot] [PATCH 2/4] core/test: Use "" as the name of the device tree root node.   Daniel Axtens
• [Skiboot] [PATCH 3/4] core/test: Test more get/set functions in device.c   Daniel Axtens
• [Skiboot] [PATCH 4/4] core/test: Test compatible, chip id and phandle related DT functions   Daniel Axtens
• [Skiboot] [PATCH 0/4] core/device.c tests   Michael Ellerman
• [Skiboot] [PATCH 00/13] Infrastructure and support for PRD on OpenPower machines   Jeremy Kerr
• [Skiboot] [PATCH 01/13] p8/i2c: Add OPAL properties in the i2c bus nodes   Jeremy Kerr
• [Skiboot] [PATCH 02/13] i2c: Workaround bad clock-frequency property from HostBoot   Jeremy Kerr
• [Skiboot] [PATCH 03/13] plat/astbmc: Remove i2c DT fixups   Jeremy Kerr
• [Skiboot] [PATCH 04/13] core: Move hservices_init to platform code   Jeremy Kerr
• [Skiboot] [PATCH 05/13] core/flash: add /chosen/ibm, system-flash property to indicate system PNOR   Jeremy Kerr
• [Skiboot] [PATCH 06/13] core/flash: Remove alignment and size restrictions   Jeremy Kerr
• [Skiboot] [PATCH 07/13] core/flash: Don't clobber rc in error path   Jeremy Kerr
• [Skiboot] [PATCH 08/13] libflash: Implement ffs_open_image   Jeremy Kerr
• [Skiboot] [PATCH 09/13] include: Add PRD message definition   Jeremy Kerr
• [Skiboot] [PATCH 10/13] hw/prd: Add firmware PRD handling subsystem   Jeremy Kerr
• [Skiboot] [PATCH 11/13] hw/prd: Handle OCC TMGT interrupts through PRD   Jeremy Kerr
• [Skiboot] [PATCH 12/13] hw/prd: Handle BMC OCC reset requests through PRD   Jeremy Kerr
• [Skiboot] [PATCH 13/13] external/opal-prd: Add userspace support for PRD facility   Jeremy Kerr
• [Skiboot] [PATCH 1/2] hw/ipmi: Disable flash access when requested   Jeremy Kerr
• [Skiboot] [PATCH 2/2] occ: Inform OCC of BMC PNOR ownership requests   Jeremy Kerr
• [Skiboot] [PATCH 13/13] external/opal-prd: Add userspace support for PRD facility   Benjamin Herrenschmidt
• [Skiboot] [PATCH 13/13] external/opal-prd: Add userspace support for PRD facility   Jeremy Kerr
• [Skiboot] [PATCH 13/13] external/opal-prd: Add userspace support for PRD facility   Benjamin Herrenschmidt
• [Skiboot] [PATCH 13/13] external/opal-prd: Add userspace support for PRD facility   Jeremy Kerr

Last message date: Sat Feb 28 15:23:49 AEDT 2015
Archived on: Sat Feb 28 15:55:17 AEDT 2015

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...