[Skiboot] [PATCH v2 1/3] opal: Enhance HMI event structure to accommodate checkstop info.

Mahesh J Salgaonkar mahesh at linux.vnet.ibm.com
Thu Feb 5 16:55:34 AEDT 2015


From: Mahesh Salgaonkar <mahesh at linux.vnet.ibm.com>

Enhance the HMI event structure to accommodate CORE/NX check stop error
information and bump up the HMI event version to V2.

	/* version 2 and later */
       union {
               /*
                * checkstop info (Core/NX).
                * Valid for OpalHMI_ERROR_MALFUNC_ALERT.
                */
               struct {
                       uint8_t xstop_type;     /* enum OpalHMI_XstopType */
                       uint8_t reserved_1[3];
                       uint32_t xstop_reason;
                       union {
                               uint32_t pir;     /* for CHECKSTOP_TYPE_CORE */
                               uint32_t chip_id; /* for CHECKSTOP_TYPE_NX */
                       } u;
               } xstop_error;
       } u;

This patch just adds new fields to HMI event structure. The subsequent
patches will implement the logic to identify reason for CORE/NX checkstop.

Signed-off-by: Mahesh Salgaonkar <mahesh at linux.vnet.ibm.com>
---
Change in V2:
- Inreoduced changes to include information about NX checkstop.
- Added PIR and chip_id fields.

 include/opal.h |   61 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 61 insertions(+)

diff --git a/include/opal.h b/include/opal.h
index 6c9b13a..78685e1 100644
--- a/include/opal.h
+++ b/include/opal.h
@@ -508,6 +508,7 @@ struct OpalMemoryErrorData {
 /* HMI interrupt event */
 enum OpalHMI_Version {
 	OpalHMIEvt_V1 = 1,
+	OpalHMIEvt_V2 = 2,
 };
 
 enum OpalHMI_Severity {
@@ -538,6 +539,49 @@ enum OpalHMI_ErrType {
 	OpalHMI_ERROR_CAPP_RECOVERY,
 };
 
+enum OpalHMI_XstopType {
+	CHECKSTOP_TYPE_UNKNOWN	=	0,
+	CHECKSTOP_TYPE_CORE	=	1,
+	CHECKSTOP_TYPE_NX	=	2,
+};
+
+enum OpalHMI_CoreXstopReason {
+	CORE_CHECKSTOP_IFU_REGFILE		= 0x00000001,
+	CORE_CHECKSTOP_IFU_LOGIC		= 0x00000002,
+	CORE_CHECKSTOP_PC_DURING_RECOV		= 0x00000004,
+	CORE_CHECKSTOP_ISU_REGFILE		= 0x00000008,
+	CORE_CHECKSTOP_ISU_LOGIC		= 0x00000010,
+	CORE_CHECKSTOP_FXU_LOGIC		= 0x00000020,
+	CORE_CHECKSTOP_VSU_LOGIC		= 0x00000040,
+	CORE_CHECKSTOP_PC_RECOV_IN_MAINT_MODE	= 0x00000080,
+	CORE_CHECKSTOP_LSU_REGFILE		= 0x00000100,
+	CORE_CHECKSTOP_PC_FWD_PROGRESS		= 0x00000200,
+	CORE_CHECKSTOP_LSU_LOGIC		= 0x00000400,
+	CORE_CHECKSTOP_PC_LOGIC			= 0x00000800,
+	CORE_CHECKSTOP_PC_HYP_RESOURCE		= 0x00001000,
+	CORE_CHECKSTOP_PC_HANG_RECOV_FAILED	= 0x00002000,
+	CORE_CHECKSTOP_PC_AMBI_HANG_DETECTED	= 0x00004000,
+	CORE_CHECKSTOP_PC_DEBUG_TRIG_ERR_INJ	= 0x00008000,
+	CORE_CHECKSTOP_PC_SPRD_HYP_ERR_INJ	= 0x00010000,
+};
+
+enum OpalHMI_NestAccelXstopReason {
+	NX_CHECKSTOP_SHM_INVAL_STATE_ERR	= 0x00000001,
+	NX_CHECKSTOP_DMA_INVAL_STATE_ERR_1	= 0x00000002,
+	NX_CHECKSTOP_DMA_INVAL_STATE_ERR_2	= 0x00000004,
+	NX_CHECKSTOP_DMA_CH0_INVAL_STATE_ERR	= 0x00000008,
+	NX_CHECKSTOP_DMA_CH1_INVAL_STATE_ERR	= 0x00000010,
+	NX_CHECKSTOP_DMA_CH2_INVAL_STATE_ERR	= 0x00000020,
+	NX_CHECKSTOP_DMA_CH3_INVAL_STATE_ERR	= 0x00000040,
+	NX_CHECKSTOP_DMA_CH4_INVAL_STATE_ERR	= 0x00000080,
+	NX_CHECKSTOP_DMA_CH5_INVAL_STATE_ERR	= 0x00000100,
+	NX_CHECKSTOP_DMA_CH6_INVAL_STATE_ERR	= 0x00000200,
+	NX_CHECKSTOP_DMA_CH7_INVAL_STATE_ERR	= 0x00000400,
+	NX_CHECKSTOP_DMA_CRB_UE			= 0x00000800,
+	NX_CHECKSTOP_DMA_CRB_SUE		= 0x00001000,
+	NX_CHECKSTOP_PBI_ISN_UE			= 0x00002000,
+};
+
 struct OpalHMIEvent {
 	uint8_t		version;	/* 0x00 */
 	uint8_t		severity;	/* 0x01 */
@@ -548,6 +592,23 @@ struct OpalHMIEvent {
 	uint64_t	hmer;
 	/* TFMR register. Valid only for TFAC and TFMR_PARITY error type. */
 	uint64_t	tfmr;
+
+	/* version 2 and later */
+	union {
+		/*
+		 * checkstop info (Core/NX).
+		 * Valid for OpalHMI_ERROR_MALFUNC_ALERT.
+		 */
+		struct {
+			uint8_t	xstop_type;	/* enum OpalHMI_XstopType */
+			uint8_t reserved_1[3];
+			uint32_t xstop_reason;
+			union {
+				uint32_t pir;	  /* for CHECKSTOP_TYPE_CORE */
+				uint32_t chip_id; /* for CHECKSTOP_TYPE_NX */
+			} u;
+		} xstop_error;
+	} u;
 };
 
 enum {



More information about the Skiboot mailing list