September 2016 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Thu Sep 1 02:50:29 AEST 2016
Ending: Fri Sep 30 23:12:52 AEST 2016
Messages: 269

• Logging utilities.   Rick Altherr
• Aspeed board for development   Rick Altherr
• Interceptor for org.freedesktop.DBus.Properties.Set   Chris Austen
• [PATCH linux v5 2/7] drivers/fsi: Add FSI Master Functionality and Initialization   Brad Bishop
• [PATCH linux v5 0/7] Introducing the FSI device driver   Christopher Bostic
• [PATCH linux v5 5/7] drivers/fsi: Add FSI bus type and hook into LDM   Christopher Bostic
• [PATCH linux v5 2/7] drivers/fsi: Add FSI Master Functionality and Initialization   Christopher Bostic
• [PATCH linux v5 4/7] drivers/fsi: Add initial FSI link buildup   Christopher Bostic
• [PATCH linux v5 0/7] Introducing the FSI device driver   Christopher Bostic
• [PATCH linux v5 0/7] Introducing the FSI device driver   Christopher Bostic
• [PATCH linux v5 2/7] drivers/fsi: Add FSI Master Functionality and Initialization   Christopher Bostic
• [PATCH] arm/dts: Add i2c devices to facebook cmm bmc board   Matthew Conolly
• Linux dev-4.7 tree: Request for testing   Cédric Le Goater
• [RFC 0/2] misc: bt: added Block Transfer over I2C   Cédric Le Goater
• [RFC PATCH linux dev-4.7 0/6] iBT interface changes   Cédric Le Goater
• [RFC PATCH linux dev-4.7 1/6] Revert "misc: Add Aspeed BT IPMI host driver"   Cédric Le Goater
• [RFC PATCH linux dev-4.7 2/6] ARM: aspeed: remove previous definitions in default config   Cédric Le Goater
• [RFC PATCH linux dev-4.7 3/6] ARM: dts: aspeed: remove previous iBT definitions   Cédric Le Goater
• [RFC PATCH linux dev-4.7 4/6] misc: Add Aspeed BT IPMI BMC driver   Cédric Le Goater
• [RFC PATCH linux dev-4.7 5/6] ARM: aspeed: Add defconfigs for CONFIG_ASPEED_BT_IPMI_BMC   Cédric Le Goater
• [RFC PATCH linux dev-4.7 6/6] ARM: dts: aspeed: Enable BT IPMI BMC device   Cédric Le Goater
• [RFC PATCH linux dev-4.7 4/6] misc: Add Aspeed BT IPMI BMC driver   Cédric Le Goater
• [RFC PATCH linux dev-4.7 6/6] ARM: dts: aspeed: Enable BT IPMI BMC device   Cédric Le Goater
• [RFC PATCH linux dev-4.7 4/6] misc: Add Aspeed BT IPMI BMC driver   Cédric Le Goater
• [RFC PATCH linux dev-4.7 4/6] misc: Add Aspeed BT IPMI BMC driver   Cédric Le Goater
• [RFC PATCH linux dev-4.7 4/6] misc: Add Aspeed BT IPMI BMC driver   Cédric Le Goater
• [RFC PATCH linux dev-4.7 4/6] misc: Add Aspeed BT IPMI BMC driver   Cédric Le Goater
• [RFC PATCH linux dev-4.7 0/6] iBT interface changes   Cédric Le Goater
• python command line client and library for OpenBMC   Mark Hamzy
• Celebration in the streets (aka pinmux is merged)   Benjamin Herrenschmidt
• [PATCH v2 2/2] i2c: aspeed: added documentation for Aspeed I2C driver   Rob Herring
• [PATCH v3 2/2] i2c: aspeed: added documentation for Aspeed I2C driver   Rob Herring
• [PATCH 0/2] i2c: aspeed: added driver for Aspeed I2C   Brendan Higgins
• [PATCH 1/2] i2c: aspeed: added driver for Aspeed I2C   Brendan Higgins
• [PATCH 2/2] i2c: aspeed: added documentation for Aspeed I2C driver   Brendan Higgins
• [RFC 0/2] misc: bt: added Block Transfer over I2C   Brendan Higgins
• [RFC 1/2] misc: bt: added IPMI Block Transfer over I2C master and slave   Brendan Higgins
• [RFC 2/2] misc: bt: added documentation for bt-i2c drivers   Brendan Higgins
• [PATCH v2 1/2] i2c: aspeed: added driver for Aspeed I2C   Brendan Higgins
• [PATCH v2 1/2] i2c: aspeed: added driver for Aspeed I2C   Brendan Higgins
• [PATCH 0/2] i2c: aspeed: added driver for Aspeed I2C   Brendan Higgins
• [PATCH 1/2] i2c: aspeed: added driver for Aspeed I2C   Brendan Higgins
• [PATCH 2/2] i2c: aspeed: added documentation for Aspeed I2C driver   Brendan Higgins
• [RFC 1/2] misc: bt: added IPMI Block Transfer over I2C master and slave   Brendan Higgins
• [RFC 0/2] misc: bt: added Block Transfer over I2C   Brendan Higgins
• Supporting one IPMI request does not yield one response   Brendan Higgins
• [PATCH v2 1/2] i2c: aspeed: added driver for Aspeed I2C   Brendan Higgins
• [PATCH v2 2/2] i2c: aspeed: added documentation for Aspeed I2C driver   Brendan Higgins
• [PATCH v2 1/2] i2c: aspeed: added driver for Aspeed I2C   Brendan Higgins
• [PATCH v3 1/2] i2c: aspeed: added driver for Aspeed I2C   Brendan Higgins
• [PATCH v3 2/2] i2c: aspeed: added documentation for Aspeed I2C driver   Brendan Higgins
• [PATCH v2 2/2] i2c: aspeed: added documentation for Aspeed I2C driver   Brendan Higgins
• [PATCH v2 2/2] i2c: aspeed: added documentation for Aspeed I2C driver   Brendan Higgins
• [PATCH v2 2/2] i2c: aspeed: added documentation for Aspeed I2C driver   Brendan Higgins
• [PATCH v2 2/2] i2c: aspeed: added documentation for Aspeed I2C driver   Brendan Higgins
• Supporting one IPMI request does not yield one response   Brendan Higgins
• [PATCH linux 0/3] aspeed: pinctrl fixes for I2C, GPIO   Andrew Jeffery
• [PATCH linux 1/3] aspeed-g5: Add I2C mux configuration properties   Andrew Jeffery
• [PATCH linux 2/3] pinctrl-aspeed-g4: Add definitions for pins in GPIO banks A-H inclusive   Andrew Jeffery
• [PATCH linux 3/3] pinctrl-aspeed: "Not enabled" is a significant mux state   Andrew Jeffery
• Celebration in the streets (aka pinmux is merged)   Andrew Jeffery
• [linux dev-4.7 1/3] pinctrl: aspeed: Add SPI pins to G5   Andrew Jeffery
• [linux dev-4.7 2/3] arm: dts: aspeed: Add spi1 pins to g5 device tree   Andrew Jeffery
• [linux dev-4.7 3/3] arm: dts: aspeed: Add SPI1 master pinmux hog to g5 machines   Andrew Jeffery
• [PATCH 03/16] Ensure that the old style MDIO interface is active   Andrew Jeffery
• [PATCH 05/16] arm/dts: Remove mac hardware checksum from Firestone   Andrew Jeffery
• [PATCH 06/16] mach-aspeed: Add missing Firestone setup method and   Andrew Jeffery
• [PATCH 07/16] pinctrl-aspeed-g4: Add definition for GPIO pins J2 and   Andrew Jeffery
• [PATCH 13/16] Enable RGMII pin functions in Firestone DT   Andrew Jeffery
• [linux dev-4.7 3/3] arm: dts: aspeed: Add SPI1 master pinmux hog to g5 machines   Andrew Jeffery
• [PATCH 03/17] Ensure that the old style MDIO interface is active before registering the MDIO bus on Faraday style MACs. Without this patch the hardware may continue to expect new style commands, yielding MDIO timeouts and general lack of communication with the MII.   Andrew Jeffery
• [PATCH 14/17] Enable RGMII pin functions in Firestone DT   Andrew Jeffery
• [PATCH 08/17] pinctrl-aspeed-g4: Add missing MDIO1 pingroup   Andrew Jeffery
• [PATCH 07/17] pinctrl-aspeed-g4: Add definition for GPIO pins J2 and O2   Andrew Jeffery
• [PATCH 03/17] Ensure that the old style MDIO interface is active before registering the MDIO bus on Faraday style MACs. Without this patch the hardware may continue to expect new style commands, yielding MDIO timeouts and general lack of communication with the MII.   Andrew Jeffery
• [PATCH 03/17] Ensure that the old style MDIO interface is active before registering the MDIO bus on Faraday style MACs. Without this patch the hardware may continue to expect new style commands, yielding MDIO timeouts and general lack of communication with the MII.   Andrew Jeffery
• [PATCH 03/19] Ensure that the old style MDIO interface is active   Andrew Jeffery
• [PATCH 03/19] Ensure that the old style MDIO interface is active   Andrew Jeffery
• [PATCH v2] pinctrl: aspeed: Fix names for balls at GPIOD2,3   Andrew Jeffery
• [PATCH 0/8] pinctrl: aspeed: Fixes for core and g5, implement remaining pins   Andrew Jeffery
• [PATCH 1/8] pinctrl: aspeed: "Not enabled" is a significant mux state   Andrew Jeffery
• [PATCH 2/8] pinctrl: aspeed-g5: Fix names of GPID2 pins   Andrew Jeffery
• [PATCH 3/8] pinctrl: aspeed-g5: Fix GPIOE1 typo   Andrew Jeffery
• [PATCH 4/8] pinctrl: aspeed-g5: Fix pin association of SPI1 function   Andrew Jeffery
• [PATCH 5/8] pinctrl: aspeed: Enable capture of off-SCU pinmux state   Andrew Jeffery
• [PATCH 6/8] pinctrl: aspeed-g4: Capture SuperIO pinmux dependency   Andrew Jeffery
• [PATCH 7/8] pinctrl: aspeed-g4: Add mux configuration for all pins   Andrew Jeffery
• [PATCH 8/8] pinctrl: aspeed-g5: Add mux configuration for all pins   Andrew Jeffery
• [PATCH 5/8] pinctrl: aspeed: Enable capture of off-SCU pinmux state   Andrew Jeffery
• [PATCH 2/3] aspeed/g5: helper SCU functions for configuring aspeed I2C   Andrew Jeffery
• Need some advice on IPMI "Get Chassi Capabilities" command   Li Nan
• Aspeed board for development   Arjun Padmanabhan
• runqemu qemux86-64 image kvm cpuid error   Arjun Padmanabhan
• runqemu qemux86-64 image kvm cpuid error   Arjun Padmanabhan
• [PATCH 01/16] phy/broadcom: Add support for the BCM54210E   Timothy Pearson
• [PATCH 02/16] net/phy: Expose 100base-T capability only   Timothy Pearson
• [PATCH 03/16] Ensure that the old style MDIO interface is active   Timothy Pearson
• [PATCH 04/16] Allow no-hw-checksum override in devicetree outside of   Timothy Pearson
• [PATCH 05/16] arm/dts: Remove mac hardware checksum from Firestone   Timothy Pearson
• [PATCH 06/16] mach-aspeed: Add missing Firestone setup method and   Timothy Pearson
• [PATCH 07/16] pinctrl-aspeed-g4: Add definition for GPIO pins J2 and   Timothy Pearson
• [PATCH 08/16] Add missing LEDs to Firestone DT   Timothy Pearson
• [PATCH 09/16] Add missing console UART to Firestone DT   Timothy Pearson
• [PATCH 10/16] Add missing UARTs to Firestone DT   Timothy Pearson
• [PATCH 11/16] Fix Turismo I2C OCC mapping on Firestone   Timothy Pearson
• [PATCH 12/16] Enable I2C hub and connected devices in Firestone DT   Timothy Pearson
• [PATCH 13/16] Enable RGMII pin functions in Firestone DT   Timothy Pearson
• [PATCH 14/16] Enable vuart in Firestone DT   Timothy Pearson
• [PATCH 15/16] Add LED expander mapping to Firestone DT   Timothy Pearson
• [PATCH 16/16] Enable FSI buffer on Firestone   Timothy Pearson
• [PATCH 01/16] phy/broadcom: Add support for the BCM54210E   Timothy Pearson
• [PATCH 07/16] pinctrl-aspeed-g4: Add definition for GPIO pins J2 and   Timothy Pearson
• [PATCH 06/16] mach-aspeed: Add missing Firestone setup method and   Timothy Pearson
• [PATCH 00/17] Fix Firestone IPL failure   Timothy Pearson
• [PATCH 01/17] phy/broadcom: Add support for the BCM54210E   Timothy Pearson
• [PATCH 02/17] net/phy: Expose 100base-T capability only   Timothy Pearson
• [PATCH 03/17] Ensure that the old style MDIO interface is active before registering the MDIO bus on Faraday style MACs. Without this patch the hardware may continue to expect new style commands, yielding MDIO timeouts and general lack of communication with the MII.   Timothy Pearson
• [PATCH 04/17] Allow no-hw-checksum override in devicetree outside of NCSI mode.   Timothy Pearson
• [PATCH 05/17] arm/dts: Remove mac hardware checksum from Firestone BMC Board   Timothy Pearson
• [PATCH 06/17] mach-aspeed: Add missing Firestone setup method and call   Timothy Pearson
• [PATCH 07/17] pinctrl-aspeed-g4: Add definition for GPIO pins J2 and O2   Timothy Pearson
• [PATCH 08/17] pinctrl-aspeed-g4: Add missing MDIO1 pingroup   Timothy Pearson
• [PATCH 09/17] Add missing LEDs to Firestone DT   Timothy Pearson
• [PATCH 10/17] Add missing console UART to Firestone DT   Timothy Pearson
• [PATCH 11/17] Add missing UARTs to Firestone DT   Timothy Pearson
• [PATCH 12/17] Fix Turismo I2C OCC mapping on Firestone   Timothy Pearson
• [PATCH 13/17] Enable I2C hub and connected devices in Firestone DT   Timothy Pearson
• [PATCH 14/17] Enable RGMII pin functions in Firestone DT   Timothy Pearson
• [PATCH 15/17] Enable vuart in Firestone DT   Timothy Pearson
• [PATCH 16/17] Add LED expander mapping to Firestone DT   Timothy Pearson
• [PATCH 17/17] Enable FSI buffer on Firestone   Timothy Pearson
• [PATCH 03/17] Ensure that the old style MDIO interface is active before registering the MDIO bus on Faraday style MACs. Without this patch the hardware may continue to expect new style commands, yielding MDIO timeouts and general lack of communication with the MII.   Timothy Pearson
• [PATCH 03/17] Ensure that the old style MDIO interface is active before registering the MDIO bus on Faraday style MACs. Without this patch the hardware may continue to expect new style commands, yielding MDIO timeouts and general lack of communication with the MII.   Timothy Pearson
• [PATCH 03/19] Ensure that the old style MDIO interface is active   Timothy Pearson
• [PATCH 03/19] Ensure that the old style MDIO interface is active   Timothy Pearson
• [PATCH] Add hwmon driver for MAX31875   Timothy Pearson
• [PATCH] Initial driver for the MAX31785 intelligent fan controller   Timothy Pearson
• [PATCH 03/19] Ensure that the old style MDIO interface is active   Timothy Pearson
• [PATCH 04/17] Allow no-hw-checksum override in devicetree outside of NCSI mode.   Timothy Pearson
• [PATCH] Initial driver for the MAX31785 intelligent fan controller   Timothy Pearson
• [PATCH 16/17] Add LED expander mapping to Firestone DT   Timothy Pearson
• [PATCH v4.7 1/7] net/ncsi: Avoid unused-value warning   Gavin Shan
• [PATCH v4.7 2/7] net/ncsi: Introduce NCSI_RESERVED_CHANNEL   Gavin Shan
• [PATCH v4.7 3/7] net/ncsi: Don't probe on the reserved channel ID (0x1f)   Gavin Shan
• [PATCH v4.7 4/7] net/ncsi: Rework request index allocation   Gavin Shan
• [PATCH v4.7 5/7] net/ncsi: Allow to extend NCSI request properties   Gavin Shan
• [PATCH v4.7 6/7] net/ncsi: Rework the channel monitoring   Gavin Shan
• [PATCH v4.7 7/7] net/ncsi: Introduce ncsi_stop_dev()   Gavin Shan
• [PATCH v4.7 6/7] net/ncsi: Rework the channel monitoring   Gavin Shan
• [PATCH v4.7 7/7] net/ncsi: Introduce ncsi_stop_dev()   Gavin Shan
• [PATCH v4.7 1/7] net/ncsi: Avoid unused-value warning   Gavin Shan
• [PATCH v2 4.7 0/8] NCSI Fixes   Gavin Shan
• [PATCH v2 4.7 1/8] net/ncsi: Avoid unused-value build warning from ia64-linux-gcc   Gavin Shan
• [PATCH v2 4.7 2/8] net/ncsi: Introduce NCSI_RESERVED_CHANNEL   Gavin Shan
• [PATCH v2 4.7 3/8] net/ncsi: Don't probe on the reserved channel ID (0x1f)   Gavin Shan
• [PATCH v2 4.7 4/8] net/ncsi: Rework request index allocation   Gavin Shan
• [PATCH v2 4.7 5/8] net/ncsi: Allow to extend NCSI request properties   Gavin Shan
• [PATCH v2 4.7 6/8] net/ncsi: Rework the channel monitoring   Gavin Shan
• [PATCH v2 4.7 7/8] net/ncsi: Introduce ncsi_stop_dev()   Gavin Shan
• [PATCH v2 4.7 8/8] net/faraday: Stop NCSI device on shutdown   Gavin Shan
• [PATCH v4.7 6/7] net/ncsi: Rework the channel monitoring   Gavin Shan
• [PATCH u-boot] Some cleanup of ast-g5 platform.S   Maxim Sloyko
• [PATCH] aspeed/ast-g5: Added ast_uart.{c, h} files, moved most of the diagnostic message printing to ast-g5.c   Maxim Sloyko
• [PATCH] aspeed/ast-g5: Added ast_uart.{c, h} files, moved most of the diagnostic message printing to ast-g5.c   Maxim Sloyko
• [PATCH] aspeed/g5: Device Tree for ast2500 and eval board, I2C driver   Maxim Sloyko
• [PATCH] aspeed/g5: Device Tree for ast2500 and eval board, I2C driver   Maxim Sloyko
• [PATCH 1/3] aspeed/g5: Device Tree for ast2500, copied from openbmc/linux (include file), plus minimal device tree configuration for ast2500 eval board.   Maxim Sloyko
• [PATCH 2/3] aspeed/g5: helper SCU functions for configuring aspeed I2C   Maxim Sloyko
• Charts from OpenBMC MRW Talk   Matt Spinler
• [PATCH u-boot] Some cleanup of ast-g5 platform.S   Joel Stanley
• [PATCH 0/2] i2c: aspeed: added driver for Aspeed I2C   Joel Stanley
• [PATCH linux v5 0/7] Introducing the FSI device driver   Joel Stanley
• [PATCH linux 1/3] aspeed-g5: Add I2C mux configuration properties   Joel Stanley
• [PATCH linux 2/3] pinctrl-aspeed-g4: Add definitions for pins in GPIO banks A-H inclusive   Joel Stanley
• [PATCH linux 3/3] pinctrl-aspeed: "Not enabled" is a significant mux state   Joel Stanley
• [PATCH v2] i2c: aspeed: added driver for Aspeed I2C   Joel Stanley
• [PATCH linux v5 2/7] drivers/fsi: Add FSI Master Functionality and Initialization   Joel Stanley
• [PATCH linux v5 0/7] Introducing the FSI device driver   Joel Stanley
• [PATCH] aspeed/ast-g5: Added ast_uart.{c, h} files, moved most of the diagnostic message printing to ast-g5.c   Joel Stanley
• Celebration in the streets (aka pinmux is merged)   Joel Stanley
• [PATCH v2 1/2] i2c: aspeed: added driver for Aspeed I2C   Joel Stanley
• [PATCH 2/2] ARM: dts: aspeed: Add Ingrasys Zaius BMC DTS   Joel Stanley
• [RFC 0/2] misc: bt: added Block Transfer over I2C   Joel Stanley
• [RFC 1/2] misc: bt: added IPMI Block Transfer over I2C master and slave   Joel Stanley
• [linux] clocksource driver queued for 4.9   Joel Stanley
• [RFC PATCH linux dev-4.7 4/6] misc: Add Aspeed BT IPMI BMC driver   Joel Stanley
• [RFC PATCH linux dev-4.7 6/6] ARM: dts: aspeed: Enable BT IPMI BMC device   Joel Stanley
• [RFC PATCH linux dev-4.7 4/6] misc: Add Aspeed BT IPMI BMC driver   Joel Stanley
• [linux dev-4.7 1/3] pinctrl: aspeed: Add SPI pins to G5   Joel Stanley
• [linux dev-4.7 2/3] arm: dts: aspeed: Add spi1 pins to g5 device tree   Joel Stanley
• [linux dev-4.7 3/3] arm: dts: aspeed: Add SPI1 master pinmux hog to g5 machines   Joel Stanley
• [linux dev-4.7 3/3] arm: dts: aspeed: Add SPI1 master pinmux hog to g5 machines   Joel Stanley
• [PATCH 01/16] phy/broadcom: Add support for the BCM54210E   Joel Stanley
• [PATCH 16/16] Enable FSI buffer on Firestone   Joel Stanley
• [PATCH 10/16] Add missing UARTs to Firestone DT   Joel Stanley
• [PATCH 13/16] Enable RGMII pin functions in Firestone DT   Joel Stanley
• [PATCH 08/16] Add missing LEDs to Firestone DT   Joel Stanley
• [PATCH] aspeed/g5: Device Tree for ast2500 and eval board, I2C driver   Joel Stanley
• [PATCH v2 1/2] dt-bindings: Add Ingrasys Technology, Inc.   Joel Stanley
• [PATCH v2 2/2] ARM: dts: aspeed: Add Ingrasys Zaius BMC DTS   Joel Stanley
• Skeleton power control machine configuration   Joel Stanley
• [PATCH v2 2/2] i2c: aspeed: added documentation for Aspeed I2C driver   Joel Stanley
• [RFC PATCH linux dev-4.7 0/6] iBT interface changes   Joel Stanley
• [PATCH 04/17] Allow no-hw-checksum override in devicetree outside of NCSI mode.   Joel Stanley
• [PATCH 10/17] Add missing console UART to Firestone DT   Joel Stanley
• [PATCH 11/17] Add missing UARTs to Firestone DT   Joel Stanley
• [PATCH 13/17] Enable I2C hub and connected devices in Firestone DT   Joel Stanley
• [PATCH 15/17] Enable vuart in Firestone DT   Joel Stanley
• [PATCH 08/17] pinctrl-aspeed-g4: Add missing MDIO1 pingroup   Joel Stanley
• [PATCH] Initial driver for the MAX31785 intelligent fan controller   Joel Stanley
• [PATCH 16/17] Add LED expander mapping to Firestone DT   Joel Stanley
• [PATCH 02/17] net/phy: Expose 100base-T capability only   Joel Stanley
• openpower.xyz updates   Joel Stanley
• [PATCH v4.7 1/7] net/ncsi: Avoid unused-value warning   Joel Stanley
• [PATCH v4.7 2/7] net/ncsi: Introduce NCSI_RESERVED_CHANNEL   Joel Stanley
• [PATCH v4.7 3/7] net/ncsi: Don't probe on the reserved channel ID (0x1f)   Joel Stanley
• [PATCH v4.7 4/7] net/ncsi: Rework request index allocation   Joel Stanley
• [PATCH v4.7 5/7] net/ncsi: Allow to extend NCSI request properties   Joel Stanley
• [PATCH v4.7 6/7] net/ncsi: Rework the channel monitoring   Joel Stanley
• [PATCH v4.7 7/7] net/ncsi: Introduce ncsi_stop_dev()   Joel Stanley
• [PATCH 1/8] pinctrl: aspeed: "Not enabled" is a significant mux state   Joel Stanley
• [PATCH 2/8] pinctrl: aspeed-g5: Fix names of GPID2 pins   Joel Stanley
• [PATCH 3/8] pinctrl: aspeed-g5: Fix GPIOE1 typo   Joel Stanley
• [PATCH 4/8] pinctrl: aspeed-g5: Fix pin association of SPI1 function   Joel Stanley
• [PATCH 7/8] pinctrl: aspeed-g4: Add mux configuration for all pins   Joel Stanley
• [PATCH 8/8] pinctrl: aspeed-g5: Add mux configuration for all pins   Joel Stanley
• [PATCH 2/3] aspeed/g5: helper SCU functions for configuring aspeed I2C   Joel Stanley
• [PATCH 3/3] aspeed/g5: I2C driver.   Joel Stanley
• [PATCH 1/3] aspeed/g5: Device Tree for ast2500, copied from openbmc/linux (include file), plus minimal device tree configuration for ast2500 eval board.   Joel Stanley
• [PATCH v4.7 6/7] net/ncsi: Rework the channel monitoring   Joel Stanley
• [PATCH v4.7 6/7] net/ncsi: Rework the channel monitoring   Joel Stanley
• [PATCH v2 4.7 8/8] net/faraday: Stop NCSI device on shutdown   Joel Stanley
• [PATCH v2 4.7 7/8] net/ncsi: Introduce ncsi_stop_dev()   Joel Stanley
• [PATCH v2 4.7 6/8] net/ncsi: Rework the channel monitoring   Joel Stanley
• [PATCH 5/8] pinctrl: aspeed: Enable capture of off-SCU pinmux state   Joel Stanley
• openpower.xyz updates   Joel Stanley
• openpower.xyz updates   Joel Stanley
• Aspeed board for development   Jean-Marie Verdun
• [PATCH 2/2] ARM: dts: aspeed: Add Ingrasys Zaius BMC DTS   Xo Wang
• [PATCH v2 1/2] dt-bindings: Add Ingrasys Technology, Inc.   Xo Wang
• [PATCH v2 2/2] ARM: dts: aspeed: Add Ingrasys Zaius BMC DTS   Xo Wang
• Skeleton power control machine configuration   Xo Wang
• libflash questions mostly relating to P9 bringup   Xo Wang
• Skeleton power control machine configuration   Xo Wang
• [PATCH] pinctrl: aspeed: Fix names for balls at GPIOD2,3   Xo Wang
• [PATCH v2] pinctrl: aspeed: Fix names for balls at GPIOD2,3   Xo Wang
• OpenBMC v1.99.0 tag.   Patrick Williams
• Interceptor for org.freedesktop.DBus.Properties.Set   Patrick Williams
• Supporting one IPMI request does not yield one response   Patrick Williams
• [RFC PATCH linux dev-4.7 4/6] misc: Add Aspeed BT IPMI BMC driver   Patrick Williams
• [RFC PATCH linux dev-4.7 4/6] misc: Add Aspeed BT IPMI BMC driver   Patrick Williams
• Logging utilities.   Patrick Williams
• Aspeed board for development   Patrick Williams
• openpower.xyz updates   Patrick Williams
• openpower.xyz updates   Patrick Williams
• [PATCH] aspeed/ast-g5: Added ast_uart.{c, h} files, moved most of the diagnostic message printing to ast-g5.c   maxims at google.com
• [PATCH] aspeed/ast-g5: Added ast_uart.{c, h} files, moved most of the diagnostic message printing to ast-g5.c   maxims at google.com
• [PATCH] aspeed/g5: Device Tree for ast2500 and eval board, I2C driver   maxims at google.com
• [PATCH 1/3] aspeed/g5: Device Tree for ast2500, copied from openbmc/linux (include file), plus minimal device tree configuration for ast2500 eval board.   maxims at google.com
• [PATCH 2/3] aspeed/g5: helper SCU functions for configuring aspeed I2C   maxims at google.com
• [PATCH 3/3] aspeed/g5: I2C driver.   maxims at google.com
• [PATCH] aspeed/g5: Device Tree for ast2500   maxims at google.com
• [PATCH 1/3] aspeed: Fix regs-scu.h and ast_scu.h incompatibility.   maxims at google.com
• [PATCH 2/3] aspeed: Fixed FUC -> FUN typo in SCU.   maxims at google.com
• [PATCH 3/3] aspeed: SCU helper functions for I2C.   maxims at google.com
• [PATCH 1/2] i2c: aspeed: added driver for Aspeed I2C   kbuild test robot
• [PATCH 1/2] i2c: aspeed: added driver for Aspeed I2C   kbuild test robot
• Document on : Time Manager in OpenBMC --> Need your review.   vishwa
• Interceptor for org.freedesktop.DBus.Properties.Set   vishwa

Last message date: Fri Sep 30 23:12:52 AEST 2016
Archived on: Fri Sep 30 23:13:08 AEST 2016

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...