[PATCH 5/8] pinctrl: aspeed: Enable capture of off-SCU pinmux state
Andrew Jeffery
andrew at aj.id.au
Wed Sep 28 00:50:17 AEST 2016
The System Control Unit IP in the Aspeed SoCs is typically where the
pinmux configuration is found.
But not always.
On the AST2400 and AST2500 a number of pins depend on state in one of
the SIO, LPC or GFX IP blocks, so add support to at least capture what
that state is. The pinctrl engine for the Aspeed SoCs doesn't try to
inspect or modify the state of the off-SCU IP blocks. Instead, it logs
the state requirement with the expectation that the platform
designer/maintainer arranges for the appropriate configuration to be
applied through the associated drivers.
The IP block of interest is encoded in the reg member of struct
aspeed_sig_desc. For compatibility with the existing code, the SCU is
defined to have an IP value of 0.
Signed-off-by: Andrew Jeffery <andrew at aj.id.au>
---
drivers/pinctrl/aspeed/pinctrl-aspeed.c | 53 +++++++++++++++++++++++---
drivers/pinctrl/aspeed/pinctrl-aspeed.h | 16 +++++++-
2 files changed, 61 insertions(+), 8 deletions(-)
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed.c b/drivers/pinctrl/aspeed/pinctrl-aspeed.c
index 49aeba912531..21ef195d586f 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed.c
@@ -14,6 +14,8 @@
#include "../core.h"
#include "pinctrl-aspeed.h"
+const char *const aspeed_pinmux_ips[] = { "SCU", "SIO", "GFX", "LPC" };
+
int aspeed_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
{
struct aspeed_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
@@ -78,7 +80,9 @@ int aspeed_pinmux_get_fn_groups(struct pinctrl_dev *pctldev,
static inline void aspeed_sig_desc_print_val(
const struct aspeed_sig_desc *desc, bool enable, u32 rv)
{
- pr_debug("SCU%x[0x%08x]=0x%x, got 0x%x from 0x%08x\n", desc->reg,
+ pr_debug("Want %s%lX[0x%08X]=0x%X, got 0x%X from 0x%08X\n",
+ aspeed_pinmux_ips[SIG_DESC_IP_FROM_REG(desc->reg)],
+ SIG_DESC_OFFSET_FROM_REG(desc->reg),
desc->mask, enable ? desc->enable : desc->disable,
(rv & desc->mask) >> __ffs(desc->mask), rv);
}
@@ -105,6 +109,8 @@ static bool aspeed_sig_desc_eval(const struct aspeed_sig_desc *desc,
unsigned int raw;
u32 want;
+ WARN_ON(SIG_DESC_IP_FROM_REG(desc->reg) != ASPEED_IP_SCU);
+
if (regmap_read(map, desc->reg, &raw) < 0)
return false;
@@ -142,9 +148,19 @@ static bool aspeed_sig_expr_eval(const struct aspeed_sig_expr *expr,
for (i = 0; i < expr->ndescs; i++) {
const struct aspeed_sig_desc *desc = &expr->descs[i];
+ size_t ip = SIG_DESC_IP_FROM_REG(desc->reg);
+
+ if (ip == ASPEED_IP_SCU) {
+ if (!aspeed_sig_desc_eval(desc, enabled, map))
+ return false;
+ } else {
+ size_t offset = SIG_DESC_OFFSET_FROM_REG(desc->reg);
+ const char *ip_name = aspeed_pinmux_ips[ip];
+
+ pr_debug("Ignoring configuration of field %s%X[0x%08X]\n",
+ ip_name, offset, desc->mask);
+ }
- if (!aspeed_sig_desc_eval(desc, enabled, map))
- return false;
}
return true;
@@ -170,7 +186,14 @@ static bool aspeed_sig_expr_set(const struct aspeed_sig_expr *expr,
for (i = 0; i < expr->ndescs; i++) {
bool ret;
const struct aspeed_sig_desc *desc = &expr->descs[i];
+
+ size_t offset = SIG_DESC_OFFSET_FROM_REG(desc->reg);
+ size_t ip = SIG_DESC_IP_FROM_REG(desc->reg);
+ bool is_scu = (ip == ASPEED_IP_SCU);
+ const char *ip_name = aspeed_pinmux_ips[ip];
+
u32 pattern = enable ? desc->enable : desc->disable;
+ u32 val = (pattern << __ffs(desc->mask));
/*
* Strap registers are configured in hardware or by early-boot
@@ -179,11 +202,27 @@ static bool aspeed_sig_expr_set(const struct aspeed_sig_expr *expr,
* deconfigured and is the reason we re-evaluate after writing
* all descriptor bits.
*/
- if (desc->reg == HW_STRAP1 || desc->reg == HW_STRAP2)
+ if (is_scu && (offset == HW_STRAP1 || offset == HW_STRAP2))
continue;
- ret = regmap_update_bits(map, desc->reg, desc->mask,
- pattern << __ffs(desc->mask)) == 0;
+ /*
+ * Sometimes we need help from IP outside the SCU to activate a
+ * mux request. Report that we need its cooperation.
+ */
+ if (enable && !is_scu) {
+ pr_debug("Pinmux request for %s requires cooperation of %s IP: Need (%s%X[0x%08X] = 0x%08X\n",
+ expr->function, ip_name, ip_name, offset,
+ desc->mask, val);
+ }
+
+ /* And only read/write SCU registers */
+ if (!is_scu) {
+ pr_debug("Skipping configuration of field %s%X[0x%08X]\n",
+ ip_name, offset, desc->mask);
+ continue;
+ }
+
+ ret = regmap_update_bits(map, desc->reg, desc->mask, val) == 0;
if (!ret)
return ret;
@@ -343,6 +382,8 @@ int aspeed_pinmux_set_mux(struct pinctrl_dev *pctldev, unsigned int function,
const struct aspeed_sig_expr **funcs;
const struct aspeed_sig_expr ***prios;
+ pr_debug("Muxing pin %d for %s\n", pin, pfunc->name);
+
if (!pdesc)
return -EINVAL;
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed.h b/drivers/pinctrl/aspeed/pinctrl-aspeed.h
index 3e72ef8c54bf..4384407d77fb 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed.h
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed.h
@@ -232,6 +232,15 @@
* group.
*/
+#define ASPEED_IP_SCU 0
+#define ASPEED_IP_SIO 1
+#define ASPEED_IP_GFX 2
+#define ASPEED_IP_LPC 3
+
+#define SIG_DESC_TO_REG(ip, offset) (((ip) << 24) | (offset))
+#define SIG_DESC_IP_FROM_REG(reg) (((reg) >> 24) & GENMASK(7, 0))
+#define SIG_DESC_OFFSET_FROM_REG(reg) ((reg) & GENMASK(11, 0))
+
/*
* The "Multi-function Pins Mapping and Control" table in the SoC datasheet
* references registers by the device/offset mnemonic. The register macros
@@ -261,7 +270,10 @@
* A signal descriptor, which describes the register, bits and the
* enable/disable values that should be compared or written.
*
- * @reg: The register offset from base in bytes
+ * @reg: Split into three fields:
+ * 31:24: IP selector
+ * 23:12: Reserved
+ * 11:0: Register offset
* @mask: The mask to apply to the register. The lowest set bit of the mask is
* used to derive the shift value.
* @enable: The value that enables the function. Value should be in the LSBs,
@@ -270,7 +282,7 @@
* LSBs, not at the position of the mask.
*/
struct aspeed_sig_desc {
- unsigned int reg;
+ u32 reg;
u32 mask;
u32 enable;
u32 disable;
--
git-series 0.8.10
More information about the openbmc
mailing list