[PATCH 3/3] aspeed: SCU helper functions for I2C.

[maxims at google.com]

From: Maxim Sloyko <maxims at google.com>

SCU helper functions for configuring I2C pins and accessing APB clock.
---
 arch/arm/include/asm/arch-aspeed/ast_scu.h  |  6 +++++
 arch/arm/include/asm/arch-aspeed/regs-scu.h |  8 +++++++
 arch/arm/mach-aspeed/ast-scu.c              | 36 +++++++++++++++++++++++++++++
 3 files changed, 50 insertions(+)

diff --git a/arch/arm/include/asm/arch-aspeed/ast_scu.h b/arch/arm/include/asm/arch-aspeed/ast_scu.h
index d248416..80ebd6f 100644
--- a/arch/arm/include/asm/arch-aspeed/ast_scu.h
+++ b/arch/arm/include/asm/arch-aspeed/ast_scu.h
@@ -38,6 +38,7 @@ extern void ast_scu_get_who_init_dram(void);
 extern u32 ast_get_clk_source(void);
 extern u32 ast_get_h_pll_clk(void);
 extern u32 ast_get_ahbclk(void);
+extern u32 ast_get_apbclk(void);
 
 extern u32 ast_scu_get_vga_memsize(void);
 
@@ -45,4 +46,9 @@ extern void ast_scu_init_eth(u8 num);
 extern void ast_scu_multi_func_eth(u8 num);
 extern void ast_scu_multi_func_romcs(u8 num);
 
+/* Enable I2C controller and pins for a particular device.
+ * Device numbering starts at 1
+ */
+extern void ast_scu_enable_i2c(u8 num);
+
 #endif
diff --git a/arch/arm/include/asm/arch-aspeed/regs-scu.h b/arch/arm/include/asm/arch-aspeed/regs-scu.h
index aab032a..4c869c1 100644
--- a/arch/arm/include/asm/arch-aspeed/regs-scu.h
+++ b/arch/arm/include/asm/arch-aspeed/regs-scu.h
@@ -915,6 +915,11 @@
 #define SCU_FUN_PIN_ROMA4		(0x1 << 18)
 #define SCU_FUN_PIN_ROMA3		(0x1 << 17)
 #define SCU_FUN_PIN_ROMA2		(0x1 << 16)
+/* AST2500 only */
+#define SCU_FUN_PIN_SDA2		(0x1 << 15)
+#define SCU_FUN_PIN_SCL2		(0x1 << 14)
+#define SCU_FUN_PIN_SDA1		(0x1 << 13)
+#define SCU_FUN_PIN_SCL1		(0x1 << 12)
 
 /* AST_SCU_FUN_PIN_CTRL9		0xA8 - Multi-function Pin Control#9 */
 #define SCU_FUN_PIN_ROMA21		(0x1 << 3)
@@ -950,4 +955,7 @@
 /* AST_SCU_BMC_CLASS			0x19C - BMC device class code and revision ID */
 /* AST_SCU_BMC_DEV_ID			0x1A4 - BMC device ID */
 
+#define SCU_I2C_MIN_BUS_NUM			(1)
+#define SCU_I2C_MAX_BUS_NUM			(14)
+
 #endif
diff --git a/arch/arm/mach-aspeed/ast-scu.c b/arch/arm/mach-aspeed/ast-scu.c
index 280c421..5595873 100644
--- a/arch/arm/mach-aspeed/ast-scu.c
+++ b/arch/arm/mach-aspeed/ast-scu.c
@@ -318,6 +318,17 @@ u32 ast_get_ahbclk(void)
 
 #endif /* AST_SOC_G5 */
 
+u32 ast_get_apbclk(void)
+{
+	u32 h_pll = ast_get_h_pll_clk();
+	/* The formula for converting the bit pattern to divisor is
+	 * (4 + 4 * DIV), according to datasheet
+	 */
+	u32 apb_div = 4 + 4 * SCU_GET_PCLK_DIV(ast_scu_read(AST_SCU_CLK_SEL));
+	return h_pll / apb_div;
+}
+
+
 void ast_scu_show_system_info(void)
 {
 
@@ -496,3 +507,28 @@ void ast_scu_get_who_init_dram(void)
 		break;
 	}
 }
+
+void ast_scu_enable_i2c(u8 bus_num)
+{
+	if (bus_num < SCU_I2C_MIN_BUS_NUM || bus_num > SCU_I2C_MAX_BUS_NUM) {
+		debug("%s: bus_num is out of range, must be [%d - %d]\n", __func__,
+			  SCU_I2C_MIN_BUS_NUM, SCU_I2C_MAX_BUS_NUM);
+		return;
+	}
+
+	/* Enable I2C Controllers */
+	clrbits_le32(AST_SCU_BASE + AST_SCU_RESET, SCU_RESET_I2C);
+
+	if (bus_num >= 3) {
+		setbits_le32(AST_SCU_BASE + AST_SCU_FUN_PIN_CTRL5,
+					 SCU_FUN_PIN_I2C(bus_num));
+#ifdef AST_SOC_G5
+	} else if (bus_num == 1) {
+		setbits_le32(AST_SCU_BASE + AST_SCU_FUN_PIN_CTRL8,
+					 SCU_FUN_PIN_SDA1 | SCU_FUN_PIN_SCL1);
+	} else if (bus_num == 2) {
+		setbits_le32(AST_SCU_BASE + AST_SCU_FUN_PIN_CTRL8,
+					 SCU_FUN_PIN_SDA2 | SCU_FUN_PIN_SCL2);
+#endif
+	}
+}
-- 
2.8.0.rc3.226.g39d4020