[PATCH v2 1/2] i2c: aspeed: added driver for Aspeed I2C
Brendan Higgins
brendanhiggins at google.com
Tue Sep 20 03:56:30 AEST 2016
Gentle ping
On Fri, Sep 9, 2016 at 6:55 PM, Brendan Higgins
<brendanhiggins at google.com> wrote:
> Added initial master and slave support for Aspeed I2C controller.
> Supports fourteen busses present in ast24xx and ast25xx BMC SoCs by
> Aspeed.
>
> Signed-off-by: Brendan Higgins <brendanhiggins at google.com>
> ---
> Changes for v2:
> - Added single module_init (multiple was breaking some builds).
> ---
> drivers/i2c/busses/Kconfig | 10 +
> drivers/i2c/busses/Makefile | 1 +
> drivers/i2c/busses/i2c-aspeed.c | 831 ++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 842 insertions(+)
> create mode 100644 drivers/i2c/busses/i2c-aspeed.c
>
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index 5c3993b..0178c6c 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -998,6 +998,16 @@ config I2C_RCAR
> This driver can also be built as a module. If so, the module
> will be called i2c-rcar.
>
> +config I2C_ASPEED
> + tristate "Aspeed AST2xxx SoC I2C Controller"
> + depends on (ARCH_ASPEED || COMPILE_TEST) && OF
> + help
> + If you say yes to this option, support will be included for the
> + Aspeed AST2xxx SoC I2C controller.
> +
> + This driver can also be built as a module. If so, the module
> + will be called i2c-aspeed.
> +
> comment "External I2C/SMBus adapter drivers"
>
> config I2C_DIOLAN_U2C
> diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
> index 37f2819..49631cd 100644
> --- a/drivers/i2c/busses/Makefile
> +++ b/drivers/i2c/busses/Makefile
> @@ -96,6 +96,7 @@ obj-$(CONFIG_I2C_XILINX) += i2c-xiic.o
> obj-$(CONFIG_I2C_XLR) += i2c-xlr.o
> obj-$(CONFIG_I2C_XLP9XX) += i2c-xlp9xx.o
> obj-$(CONFIG_I2C_RCAR) += i2c-rcar.o
> +obj-$(CONFIG_I2C_ASPEED) += i2c-aspeed.o
>
> # External I2C/SMBus adapter drivers
> obj-$(CONFIG_I2C_DIOLAN_U2C) += i2c-diolan-u2c.o
> diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
> new file mode 100644
> index 0000000..b19f13c
> --- /dev/null
> +++ b/drivers/i2c/busses/i2c-aspeed.c
> @@ -0,0 +1,831 @@
> +/*
> + * I2C adapter for the ASPEED I2C bus.
> + *
> + * Copyright (C) 2012-2020 ASPEED Technology Inc.
> + * Copyright 2016 IBM Corporation
> + * Copyright 2016 Google, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/i2c.h>
> +#include <linux/irq.h>
> +#include <linux/irqdomain.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/errno.h>
> +#include <linux/interrupt.h>
> +#include <linux/completion.h>
> +#include <linux/slab.h>
> +#include <linux/of_address.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/err.h>
> +#include <linux/clk.h>
> +
> +/* I2C Register */
> +#define ASPEED_I2C_FUN_CTRL_REG 0x00
> +#define ASPEED_I2C_AC_TIMING_REG1 0x04
> +#define ASPEED_I2C_AC_TIMING_REG2 0x08
> +#define ASPEED_I2C_INTR_CTRL_REG 0x0c
> +#define ASPEED_I2C_INTR_STS_REG 0x10
> +#define ASPEED_I2C_CMD_REG 0x14
> +#define ASPEED_I2C_DEV_ADDR_REG 0x18
> +#define ASPEED_I2C_BYTE_BUF_REG 0x20
> +
> +#define ASPEED_I2C_NUM_BUS 14
> +
> +/* Global Register Definition */
> +/* 0x00 : I2C Interrupt Status Register */
> +/* 0x08 : I2C Interrupt Target Assignment */
> +
> +/* Device Register Definition */
> +/* 0x00 : I2CD Function Control Register */
> +#define ASPEED_I2CD_MULTI_MASTER_DIS BIT(15)
> +#define ASPEED_I2CD_SDA_DRIVE_1T_EN BIT(8)
> +#define ASPEED_I2CD_M_SDA_DRIVE_1T_EN BIT(7)
> +#define ASPEED_I2CD_M_HIGH_SPEED_EN BIT(6)
> +#define ASPEED_I2CD_SLAVE_EN BIT(1)
> +#define ASPEED_I2CD_MASTER_EN BIT(0)
> +
> +/* 0x08 : I2CD Clock and AC Timing Control Register #2 */
> +#define ASPEED_NO_TIMEOUT_CTRL 0
> +
> +
> +/* 0x0c : I2CD Interrupt Control Register &
> + * 0x10 : I2CD Interrupt Status Register
> + *
> + * These share bit definitions, so use the same values for the enable &
> + * status bits.
> + */
> +#define ASPEED_I2CD_INTR_SDA_DL_TIMEOUT BIT(14)
> +#define ASPEED_I2CD_INTR_BUS_RECOVER_DONE BIT(13)
> +#define ASPEED_I2CD_INTR_SLAVE_MATCH BIT(7)
> +#define ASPEED_I2CD_INTR_SCL_TIMEOUT BIT(6)
> +#define ASPEED_I2CD_INTR_ABNORMAL BIT(5)
> +#define ASPEED_I2CD_INTR_NORMAL_STOP BIT(4)
> +#define ASPEED_I2CD_INTR_ARBIT_LOSS BIT(3)
> +#define ASPEED_I2CD_INTR_RX_DONE BIT(2)
> +#define ASPEED_I2CD_INTR_TX_NAK BIT(1)
> +#define ASPEED_I2CD_INTR_TX_ACK BIT(0)
> +
> +/* 0x14 : I2CD Command/Status Register */
> +#define ASPEED_I2CD_SCL_LINE_STS BIT(18)
> +#define ASPEED_I2CD_SDA_LINE_STS BIT(17)
> +#define ASPEED_I2CD_BUS_BUSY_STS BIT(16)
> +#define ASPEED_I2CD_BUS_RECOVER_CMD BIT(11)
> +
> +/* Command Bit */
> +#define ASPEED_I2CD_M_STOP_CMD BIT(5)
> +#define ASPEED_I2CD_M_S_RX_CMD_LAST BIT(4)
> +#define ASPEED_I2CD_M_RX_CMD BIT(3)
> +#define ASPEED_I2CD_S_TX_CMD BIT(2)
> +#define ASPEED_I2CD_M_TX_CMD BIT(1)
> +#define ASPEED_I2CD_M_START_CMD BIT(0)
> +
> +/* 0x18 : I2CD Slave Device Address Register */
> +#define ASPEED_I2CD_DEV_ADDR_MASK GENMASK(6, 0)
> +
> +enum aspeed_i2c_slave_state {
> + ASPEED_I2C_SLAVE_START,
> + ASPEED_I2C_SLAVE_READ_REQUESTED,
> + ASPEED_I2C_SLAVE_READ_PROCESSED,
> + ASPEED_I2C_SLAVE_WRITE_REQUESTED,
> + ASPEED_I2C_SLAVE_WRITE_RECEIVED,
> + ASPEED_I2C_SLAVE_STOP,
> +};
> +
> +struct aspeed_i2c_bus {
> + struct i2c_adapter adap;
> + struct device *dev;
> + void __iomem *base;
> + spinlock_t lock;
> + struct completion cmd_complete;
> + int irq;
> + /* Transaction state. */
> + struct i2c_msg *msg;
> + int msg_pos;
> + u32 cmd_err;
> +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> + struct i2c_client *slave;
> + enum aspeed_i2c_slave_state slave_state;
> +#endif
> +};
> +
> +struct aspeed_i2c_controller {
> + struct device *dev;
> + void __iomem *base;
> + int irq;
> + struct irq_domain *irq_domain;
> +};
> +
> +static inline void aspeed_i2c_write(struct aspeed_i2c_bus *bus, u32 val,
> + u32 reg)
> +{
> + writel(val, bus->base + reg);
> +}
> +
> +static inline u32 aspeed_i2c_read(struct aspeed_i2c_bus *bus, u32 reg)
> +{
> + return readl(bus->base + reg);
> +}
> +
> +static u8 aspeed_i2c_recover_bus(struct aspeed_i2c_bus *bus)
> +{
> + u32 command;
> + unsigned long time_left;
> + unsigned long flags;
> + int ret = 0;
> +
> + spin_lock_irqsave(&bus->lock, flags);
> + command = aspeed_i2c_read(bus, ASPEED_I2C_CMD_REG);
> + /* Bus is idle: no recovery needed. */
> + if ((command & ASPEED_I2CD_SDA_LINE_STS) &&
> + (command & ASPEED_I2CD_SCL_LINE_STS))
> + goto out;
> +
> + dev_dbg(bus->dev, "bus hung (state %x), attempting recovery\n",
> + command);
> +
> + /* Bus held: put bus in stop state. */
> + if ((command & ASPEED_I2CD_SDA_LINE_STS) &&
> + !(command & ASPEED_I2CD_SCL_LINE_STS)) {
> + aspeed_i2c_write(bus, ASPEED_I2CD_M_STOP_CMD,
> + ASPEED_I2C_CMD_REG);
> + reinit_completion(&bus->cmd_complete);
> + spin_unlock_irqrestore(&bus->lock, flags);
> +
> + time_left = wait_for_completion_interruptible_timeout(
> + &bus->cmd_complete, bus->adap.timeout * HZ);
> +
> + spin_lock_irqsave(&bus->lock, flags);
> + if (time_left == 0)
> + ret = -ETIMEDOUT;
> + else if (bus->cmd_err)
> + ret = -EIO;
> + /* Bus error. */
> + } else if (!(command & ASPEED_I2CD_SDA_LINE_STS)) {
> + aspeed_i2c_write(bus, ASPEED_I2CD_BUS_RECOVER_CMD,
> + ASPEED_I2C_CMD_REG);
> + reinit_completion(&bus->cmd_complete);
> + spin_unlock_irqrestore(&bus->lock, flags);
> +
> + time_left = wait_for_completion_interruptible_timeout(
> + &bus->cmd_complete, bus->adap.timeout * HZ);
> +
> + spin_lock_irqsave(&bus->lock, flags);
> + if (time_left == 0)
> + ret = -ETIMEDOUT;
> + else if (bus->cmd_err)
> + ret = -EIO;
> + /* Recovery failed. */
> + else if (!(aspeed_i2c_read(bus, ASPEED_I2C_CMD_REG) &
> + ASPEED_I2CD_SDA_LINE_STS))
> + ret = -EIO;
> + }
> +
> +out:
> + spin_unlock_irqrestore(&bus->lock, flags);
> + return ret;
> +}
> +
> +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> +static bool aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus)
> +{
> + bool irq_handled = true;
> + u32 command;
> + u32 irq_status;
> + u32 status_ack = 0;
> + u8 value;
> + struct i2c_client *slave = bus->slave;
> +
> + spin_lock(&bus->lock);
> + if (!slave) {
> + irq_handled = false;
> + goto out;
> + }
> + command = aspeed_i2c_read(bus, ASPEED_I2C_CMD_REG);
> + irq_status = aspeed_i2c_read(bus, ASPEED_I2C_INTR_STS_REG);
> +
> + /* Slave was requested, restart state machine. */
> + if (irq_status & ASPEED_I2CD_INTR_SLAVE_MATCH) {
> + status_ack |= ASPEED_I2CD_INTR_SLAVE_MATCH;
> + bus->slave_state = ASPEED_I2C_SLAVE_START;
> + }
> + /* Slave is not currently active, irq was for someone else. */
> + if (bus->slave_state == ASPEED_I2C_SLAVE_STOP) {
> + irq_handled = false;
> + goto out;
> + }
> +
> + dev_dbg(bus->dev, "slave irq status 0x%08x, cmd 0x%08x\n",
> + irq_status, command);
> +
> + /* Slave was sent something. */
> + if (irq_status & ASPEED_I2CD_INTR_RX_DONE) {
> + value = aspeed_i2c_read(bus, ASPEED_I2C_BYTE_BUF_REG) >> 8;
> + /* Handle address frame. */
> + if (bus->slave_state == ASPEED_I2C_SLAVE_START) {
> + if (value & 0x1)
> + bus->slave_state =
> + ASPEED_I2C_SLAVE_READ_REQUESTED;
> + else
> + bus->slave_state =
> + ASPEED_I2C_SLAVE_WRITE_REQUESTED;
> + }
> + status_ack |= ASPEED_I2CD_INTR_RX_DONE;
> + }
> +
> + /* Slave was asked to stop. */
> + if (irq_status & ASPEED_I2CD_INTR_NORMAL_STOP) {
> + status_ack |= ASPEED_I2CD_INTR_NORMAL_STOP;
> + bus->slave_state = ASPEED_I2C_SLAVE_STOP;
> + }
> + if (irq_status & ASPEED_I2CD_INTR_TX_NAK) {
> + status_ack |= ASPEED_I2CD_INTR_TX_NAK;
> + bus->slave_state = ASPEED_I2C_SLAVE_STOP;
> + }
> +
> + if (bus->slave_state == ASPEED_I2C_SLAVE_READ_REQUESTED) {
> + if (irq_status & ASPEED_I2CD_INTR_TX_ACK)
> + dev_err(bus->dev, "Unexpected ACK on read request.\n");
> + bus->slave_state = ASPEED_I2C_SLAVE_READ_PROCESSED;
> +
> + i2c_slave_event(slave, I2C_SLAVE_READ_REQUESTED, &value);
> + aspeed_i2c_write(bus, value, ASPEED_I2C_BYTE_BUF_REG);
> + aspeed_i2c_write(bus, ASPEED_I2CD_S_TX_CMD, ASPEED_I2C_CMD_REG);
> + } else if (bus->slave_state == ASPEED_I2C_SLAVE_READ_PROCESSED) {
> + status_ack |= ASPEED_I2CD_INTR_TX_ACK;
> + if (!(irq_status & ASPEED_I2CD_INTR_TX_ACK))
> + dev_err(bus->dev,
> + "Expected ACK after processed read.\n");
> + i2c_slave_event(slave, I2C_SLAVE_READ_PROCESSED, &value);
> + aspeed_i2c_write(bus, value, ASPEED_I2C_BYTE_BUF_REG);
> + aspeed_i2c_write(bus, ASPEED_I2CD_S_TX_CMD, ASPEED_I2C_CMD_REG);
> + } else if (bus->slave_state == ASPEED_I2C_SLAVE_WRITE_REQUESTED) {
> + bus->slave_state = ASPEED_I2C_SLAVE_WRITE_RECEIVED;
> + i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value);
> + } else if (bus->slave_state == ASPEED_I2C_SLAVE_WRITE_RECEIVED) {
> + i2c_slave_event(slave, I2C_SLAVE_WRITE_RECEIVED, &value);
> + } else if (bus->slave_state == ASPEED_I2C_SLAVE_STOP) {
> + i2c_slave_event(slave, I2C_SLAVE_STOP, &value);
> + }
> +
> + if (status_ack != irq_status)
> + dev_err(bus->dev,
> + "irq handled != irq. expected %x, but was %x\n",
> + irq_status, status_ack);
> + aspeed_i2c_write(bus, status_ack, ASPEED_I2C_INTR_STS_REG);
> +
> +out:
> + spin_unlock(&bus->lock);
> + return irq_handled;
> +}
> +#endif
> +
> +static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
> +{
> + const u32 errs = ASPEED_I2CD_INTR_ARBIT_LOSS |
> + ASPEED_I2CD_INTR_ABNORMAL |
> + ASPEED_I2CD_INTR_SCL_TIMEOUT |
> + ASPEED_I2CD_INTR_SDA_DL_TIMEOUT |
> + ASPEED_I2CD_INTR_TX_NAK;
> + u32 irq_status;
> +
> + spin_lock(&bus->lock);
> + irq_status = aspeed_i2c_read(bus, ASPEED_I2C_INTR_STS_REG);
> + bus->cmd_err = irq_status & errs;
> +
> + dev_dbg(bus->dev, "master irq status 0x%08x\n", irq_status);
> +
> + /* No message to transfer. */
> + if (bus->cmd_err ||
> + (irq_status & ASPEED_I2CD_INTR_NORMAL_STOP) ||
> + (irq_status & ASPEED_I2CD_INTR_BUS_RECOVER_DONE)) {
> + complete(&bus->cmd_complete);
> + goto out;
> + } else if (!bus->msg || bus->msg_pos >= bus->msg->len)
> + goto out;
> +
> + if ((bus->msg->flags & I2C_M_RD) &&
> + (irq_status & ASPEED_I2CD_INTR_RX_DONE)) {
> + bus->msg->buf[bus->msg_pos++] = aspeed_i2c_read(
> + bus, ASPEED_I2C_BYTE_BUF_REG) >> 8;
> + if (bus->msg_pos + 1 < bus->msg->len)
> + aspeed_i2c_write(bus, ASPEED_I2CD_M_RX_CMD,
> + ASPEED_I2C_CMD_REG);
> + else if (bus->msg_pos < bus->msg->len)
> + aspeed_i2c_write(bus, ASPEED_I2CD_M_RX_CMD |
> + ASPEED_I2CD_M_S_RX_CMD_LAST,
> + ASPEED_I2C_CMD_REG);
> + } else if (!(bus->msg->flags & I2C_M_RD) &&
> + (irq_status & ASPEED_I2CD_INTR_TX_ACK)) {
> + aspeed_i2c_write(bus, bus->msg->buf[bus->msg_pos++],
> + ASPEED_I2C_BYTE_BUF_REG);
> + aspeed_i2c_write(bus, ASPEED_I2CD_M_TX_CMD, ASPEED_I2C_CMD_REG);
> + }
> +
> + /* Transmission complete: notify caller. */
> + if (bus->msg_pos >= bus->msg->len)
> + complete(&bus->cmd_complete);
> +out:
> + aspeed_i2c_write(bus, irq_status, ASPEED_I2C_INTR_STS_REG);
> + spin_unlock(&bus->lock);
> + return true;
> +}
> +
> +static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id)
> +{
> + struct aspeed_i2c_bus *bus = dev_id;
> +
> +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> + if (aspeed_i2c_slave_irq(bus)) {
> + dev_dbg(bus->dev, "irq handled by slave.\n");
> + return IRQ_HANDLED;
> + }
> +#endif
> + if (aspeed_i2c_master_irq(bus)) {
> + dev_dbg(bus->dev, "irq handled by master.\n");
> + return IRQ_HANDLED;
> + }
> + dev_err(bus->dev, "irq not handled properly!\n");
> + return IRQ_HANDLED;
> +}
> +
> +static int aspeed_i2c_master_single_xfer(struct i2c_adapter *adap,
> + struct i2c_msg *msg)
> +{
> + struct aspeed_i2c_bus *bus = adap->algo_data;
> + unsigned long flags;
> + u8 slave_addr;
> + u32 command = ASPEED_I2CD_M_START_CMD | ASPEED_I2CD_M_TX_CMD;
> + int ret = msg->len;
> + unsigned long time_left;
> +
> + spin_lock_irqsave(&bus->lock, flags);
> + bus->msg = msg;
> + bus->msg_pos = 0;
> + slave_addr = msg->addr << 1;
> + if (msg->flags & I2C_M_RD) {
> + slave_addr |= 1;
> + command |= ASPEED_I2CD_M_RX_CMD;
> + if (msg->len == 1)
> + command |= ASPEED_I2CD_M_S_RX_CMD_LAST;
> + }
> + aspeed_i2c_write(bus, slave_addr, ASPEED_I2C_BYTE_BUF_REG);
> + aspeed_i2c_write(bus, command, ASPEED_I2C_CMD_REG);
> + reinit_completion(&bus->cmd_complete);
> + spin_unlock_irqrestore(&bus->lock, flags);
> +
> + time_left = wait_for_completion_interruptible_timeout(
> + &bus->cmd_complete, bus->adap.timeout * HZ * msg->len);
> + if (time_left == 0)
> + return -ETIMEDOUT;
> +
> + spin_lock_irqsave(&bus->lock, flags);
> + if (bus->cmd_err)
> + ret = -EIO;
> + bus->msg = NULL;
> + spin_unlock_irqrestore(&bus->lock, flags);
> +
> + return ret;
> +}
> +
> +static int aspeed_i2c_master_xfer(struct i2c_adapter *adap,
> + struct i2c_msg *msgs, int num)
> +{
> + struct aspeed_i2c_bus *bus = adap->algo_data;
> + int ret;
> + int i;
> + unsigned long flags;
> + unsigned long time_left;
> +
> + /* If bus is busy, attempt recovery. We assume a single master
> + * environment.
> + */
> + if (aspeed_i2c_read(bus, ASPEED_I2C_CMD_REG) &
> + ASPEED_I2CD_BUS_BUSY_STS) {
> + ret = aspeed_i2c_recover_bus(bus);
> + if (ret)
> + return ret;
> + }
> +
> + for (i = 0; i < num; i++) {
> + ret = aspeed_i2c_master_single_xfer(adap, &msgs[i]);
> + if (ret < 0)
> + break;
> + /* TODO: Support other forms of I2C protocol mangling. */
> + if (msgs[i].flags & I2C_M_STOP) {
> + spin_lock_irqsave(&bus->lock, flags);
> + aspeed_i2c_write(bus, ASPEED_I2CD_M_STOP_CMD,
> + ASPEED_I2C_CMD_REG);
> + reinit_completion(&bus->cmd_complete);
> + spin_unlock_irqrestore(&bus->lock, flags);
> +
> + time_left = wait_for_completion_interruptible_timeout(
> + &bus->cmd_complete,
> + bus->adap.timeout * HZ);
> + if (time_left == 0)
> + return -ETIMEDOUT;
> + }
> + }
> +
> + spin_lock_irqsave(&bus->lock, flags);
> + aspeed_i2c_write(bus, ASPEED_I2CD_M_STOP_CMD, ASPEED_I2C_CMD_REG);
> + reinit_completion(&bus->cmd_complete);
> + spin_unlock_irqrestore(&bus->lock, flags);
> +
> + time_left = wait_for_completion_interruptible_timeout(
> + &bus->cmd_complete, bus->adap.timeout * HZ);
> + if (time_left == 0)
> + return -ETIMEDOUT;
> +
> + /* If nothing went wrong, return number of messages transferred. */
> + if (ret < 0)
> + return ret;
> + else
> + return i;
> +}
> +
> +static u32 aspeed_i2c_functionality(struct i2c_adapter *adap)
> +{
> + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA;
> +}
> +
> +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> +static int aspeed_i2c_reg_slave(struct i2c_client *client)
> +{
> + struct aspeed_i2c_bus *bus;
> + unsigned long flags;
> + u32 addr_reg_val;
> + u32 func_ctrl_reg_val;
> +
> + bus = client->adapter->algo_data;
> + spin_lock_irqsave(&bus->lock, flags);
> + if (bus->slave) {
> + spin_unlock_irqrestore(&bus->lock, flags);
> + return -EINVAL;
> + }
> +
> + /* Set slave addr. */
> + addr_reg_val = aspeed_i2c_read(bus, ASPEED_I2C_DEV_ADDR_REG);
> + addr_reg_val &= ~ASPEED_I2CD_DEV_ADDR_MASK;
> + addr_reg_val |= client->addr & ASPEED_I2CD_DEV_ADDR_MASK;
> + aspeed_i2c_write(bus, addr_reg_val, ASPEED_I2C_DEV_ADDR_REG);
> +
> + /* Switch from master mode to slave mode. */
> + func_ctrl_reg_val = aspeed_i2c_read(bus, ASPEED_I2C_FUN_CTRL_REG);
> + func_ctrl_reg_val &= ~ASPEED_I2CD_MASTER_EN;
> + func_ctrl_reg_val |= ASPEED_I2CD_SLAVE_EN;
> + aspeed_i2c_write(bus, func_ctrl_reg_val, ASPEED_I2C_FUN_CTRL_REG);
> +
> + bus->slave = client;
> + bus->slave_state = ASPEED_I2C_SLAVE_STOP;
> + spin_unlock_irqrestore(&bus->lock, flags);
> + return 0;
> +}
> +
> +static int aspeed_i2c_unreg_slave(struct i2c_client *client)
> +{
> + struct aspeed_i2c_bus *bus = client->adapter->algo_data;
> + unsigned long flags;
> + u32 func_ctrl_reg_val;
> +
> + spin_lock_irqsave(&bus->lock, flags);
> + if (!bus->slave) {
> + spin_unlock_irqrestore(&bus->lock, flags);
> + return -EINVAL;
> + }
> +
> + /* Switch from slave mode to master mode. */
> + func_ctrl_reg_val = aspeed_i2c_read(bus, ASPEED_I2C_FUN_CTRL_REG);
> + func_ctrl_reg_val &= ~ASPEED_I2CD_SLAVE_EN;
> + func_ctrl_reg_val |= ASPEED_I2CD_MASTER_EN;
> + aspeed_i2c_write(bus, func_ctrl_reg_val, ASPEED_I2C_FUN_CTRL_REG);
> +
> + bus->slave = NULL;
> + spin_unlock_irqrestore(&bus->lock, flags);
> + return 0;
> +}
> +#endif
> +
> +static const struct i2c_algorithm aspeed_i2c_algo = {
> + .master_xfer = aspeed_i2c_master_xfer,
> + .functionality = aspeed_i2c_functionality,
> +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> + .reg_slave = aspeed_i2c_reg_slave,
> + .unreg_slave = aspeed_i2c_unreg_slave,
> +#endif
> +};
> +
> +static u32 aspeed_i2c_get_clk_reg_val(u32 divider_ratio)
> +{
> + unsigned int inc = 0, div;
> + u32 scl_low, scl_high, data;
> +
> + for (div = 0; divider_ratio >= 16; div++) {
> + inc |= (divider_ratio & 1);
> + divider_ratio >>= 1;
> + }
> + divider_ratio += inc;
> + scl_low = (divider_ratio >> 1) - 1;
> + scl_high = divider_ratio - scl_low - 2;
> + data = 0x77700300 | (scl_high << 16) | (scl_low << 12) | div;
> + return data;
> +}
> +
> +static int aspeed_i2c_init_clk(struct aspeed_i2c_bus *bus,
> + struct platform_device *pdev)
> +{
> + struct clk *pclk;
> + u32 clk_freq;
> + u32 divider_ratio;
> + int ret;
> +
> + pclk = devm_clk_get(&pdev->dev, NULL);
> + if (IS_ERR(pclk)) {
> + dev_err(&pdev->dev, "clk_get failed\n");
> + return PTR_ERR(pclk);
> + }
> + ret = of_property_read_u32(pdev->dev.of_node,
> + "clock-frequency", &clk_freq);
> + if (ret < 0) {
> + dev_err(&pdev->dev,
> + "Could not read clock-frequency property\n");
> + clk_freq = 100000;
> + }
> + divider_ratio = clk_get_rate(pclk) / clk_freq;
> + /* We just need the clock rate, we don't actually use the clk object. */
> + devm_clk_put(&pdev->dev, pclk);
> +
> + /* Set AC Timing */
> + if (clk_freq / 1000 > 400) {
> + aspeed_i2c_write(bus, aspeed_i2c_read(bus,
> + ASPEED_I2C_FUN_CTRL_REG) |
> + ASPEED_I2CD_M_HIGH_SPEED_EN |
> + ASPEED_I2CD_M_SDA_DRIVE_1T_EN |
> + ASPEED_I2CD_SDA_DRIVE_1T_EN,
> + ASPEED_I2C_FUN_CTRL_REG);
> +
> + aspeed_i2c_write(bus, 0x3, ASPEED_I2C_AC_TIMING_REG2);
> + aspeed_i2c_write(bus, aspeed_i2c_get_clk_reg_val(divider_ratio),
> + ASPEED_I2C_AC_TIMING_REG1);
> + } else {
> + aspeed_i2c_write(bus, aspeed_i2c_get_clk_reg_val(divider_ratio),
> + ASPEED_I2C_AC_TIMING_REG1);
> + aspeed_i2c_write(bus, ASPEED_NO_TIMEOUT_CTRL,
> + ASPEED_I2C_AC_TIMING_REG2);
> + }
> +
> + return 0;
> +}
> +
> +static void noop(struct irq_data *data) { }
> +
> +static struct irq_chip aspeed_i2c_irqchip = {
> + .name = "ast-i2c",
> + .irq_unmask = noop,
> + .irq_mask = noop,
> +};
> +
> +static int aspeed_i2c_probe_bus(struct platform_device *pdev)
> +{
> + struct aspeed_i2c_bus *bus;
> + struct aspeed_i2c_controller *controller =
> + dev_get_drvdata(pdev->dev.parent);
> + struct resource *res;
> + int ret, bus_num, irq;
> +
> + bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL);
> + if (!bus)
> + return -ENOMEM;
> +
> + ret = of_property_read_u32(pdev->dev.of_node, "bus", &bus_num);
> + if (ret)
> + return -ENXIO;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + bus->base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(bus->base))
> + return PTR_ERR(bus->base);
> +
> + bus->irq = platform_get_irq(pdev, 0);
> + if (bus->irq < 0) {
> + dev_err(&pdev->dev, "platform_get_irq failed\n");
> + return -ENXIO;
> + }
> +
> + irq = irq_create_mapping(controller->irq_domain, bus_num);
> + irq_set_chip_data(irq, controller);
> + irq_set_chip_and_handler(irq, &aspeed_i2c_irqchip, handle_simple_irq);
> + ret = devm_request_irq(&pdev->dev, bus->irq, aspeed_i2c_bus_irq,
> + 0, dev_name(&pdev->dev), bus);
> + if (ret) {
> + dev_err(&pdev->dev, "devm_request_irq failed\n");
> + return -ENXIO;
> + }
> +
> + /* Initialize the I2C adapter */
> + spin_lock_init(&bus->lock);
> + init_completion(&bus->cmd_complete);
> + bus->adap.nr = bus_num;
> + bus->adap.owner = THIS_MODULE;
> + bus->adap.retries = 0;
> + bus->adap.timeout = 5;
> + bus->adap.algo = &aspeed_i2c_algo;
> + bus->adap.algo_data = bus;
> + bus->adap.dev.parent = &pdev->dev;
> + bus->adap.dev.of_node = pdev->dev.of_node;
> + snprintf(bus->adap.name, sizeof(bus->adap.name), "Aspeed i2c-%d",
> + bus_num);
> +
> + bus->dev = &pdev->dev;
> +
> + /* reset device: disable master & slave functions */
> + aspeed_i2c_write(bus, 0, ASPEED_I2C_FUN_CTRL_REG);
> +
> + ret = aspeed_i2c_init_clk(bus, pdev);
> + if (ret < 0)
> + return ret;
> +
> + /* Enable Master Mode */
> + aspeed_i2c_write(bus, aspeed_i2c_read(bus, ASPEED_I2C_FUN_CTRL_REG) |
> + ASPEED_I2CD_MASTER_EN |
> + ASPEED_I2CD_MULTI_MASTER_DIS, ASPEED_I2C_FUN_CTRL_REG);
> +
> + /* Set interrupt generation of I2C controller */
> + aspeed_i2c_write(bus, ASPEED_I2CD_INTR_SDA_DL_TIMEOUT |
> + ASPEED_I2CD_INTR_BUS_RECOVER_DONE |
> + ASPEED_I2CD_INTR_SCL_TIMEOUT |
> + ASPEED_I2CD_INTR_ABNORMAL |
> + ASPEED_I2CD_INTR_NORMAL_STOP |
> + ASPEED_I2CD_INTR_ARBIT_LOSS |
> + ASPEED_I2CD_INTR_RX_DONE |
> + ASPEED_I2CD_INTR_TX_NAK |
> + ASPEED_I2CD_INTR_TX_ACK,
> + ASPEED_I2C_INTR_CTRL_REG);
> +
> + ret = i2c_add_numbered_adapter(&bus->adap);
> + if (ret < 0)
> + return -ENXIO;
> +
> + platform_set_drvdata(pdev, bus);
> +
> + dev_info(bus->dev, "i2c bus %d registered, irq %d\n",
> + bus->adap.nr, bus->irq);
> +
> + return 0;
> +}
> +
> +static int aspeed_i2c_remove_bus(struct platform_device *pdev)
> +{
> + struct aspeed_i2c_bus *bus = platform_get_drvdata(pdev);
> +
> + i2c_del_adapter(&bus->adap);
> + return 0;
> +}
> +
> +static const struct of_device_id aspeed_i2c_bus_of_table[] = {
> + { .compatible = "aspeed,ast2400-i2c-bus", },
> + { .compatible = "aspeed,ast2500-i2c-bus", },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, aspeed_i2c_bus_of_table);
> +
> +static struct platform_driver aspeed_i2c_bus_driver = {
> + .probe = aspeed_i2c_probe_bus,
> + .remove = aspeed_i2c_remove_bus,
> + .driver = {
> + .name = "ast-i2c-bus",
> + .of_match_table = aspeed_i2c_bus_of_table,
> + },
> +};
> +
> +static void aspeed_i2c_controller_irq(struct irq_desc *desc)
> +{
> + struct aspeed_i2c_controller *c = irq_desc_get_handler_data(desc);
> + unsigned long p, status;
> + unsigned int bus_irq;
> +
> + status = readl(c->base);
> + for_each_set_bit(p, &status, ASPEED_I2C_NUM_BUS) {
> + bus_irq = irq_find_mapping(c->irq_domain, p);
> + generic_handle_irq(bus_irq);
> + }
> +}
> +
> +static int aspeed_i2c_probe_controller(struct platform_device *pdev)
> +{
> + struct aspeed_i2c_controller *controller;
> + struct device_node *np;
> + struct resource *res;
> +
> + controller = kzalloc(sizeof(*controller), GFP_KERNEL);
> + if (!controller)
> + return -ENOMEM;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + controller->base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(controller->base))
> + return PTR_ERR(controller->base);
> +
> + controller->irq = platform_get_irq(pdev, 0);
> + if (controller->irq < 0) {
> + dev_err(&pdev->dev, "no platform IRQ\n");
> + return -ENXIO;
> + }
> +
> + controller->irq_domain = irq_domain_add_linear(pdev->dev.of_node,
> + ASPEED_I2C_NUM_BUS, &irq_domain_simple_ops, NULL);
> + if (!controller->irq_domain) {
> + dev_err(&pdev->dev, "no IRQ domain\n");
> + return -ENXIO;
> + }
> + controller->irq_domain->name = "ast-i2c-domain";
> +
> + irq_set_chained_handler_and_data(controller->irq,
> + aspeed_i2c_controller_irq, controller);
> +
> + controller->dev = &pdev->dev;
> +
> + platform_set_drvdata(pdev, controller);
> +
> + dev_info(controller->dev, "i2c controller registered, irq %d\n",
> + controller->irq);
> +
> + for_each_child_of_node(pdev->dev.of_node, np) {
> + int ret;
> + u32 bus_num;
> + char bus_id[sizeof("i2c-12345")];
> +
> + /*
> + * Set a useful name derived from the bus number; the device
> + * tree should provide us with one that corresponds to the
> + * hardware numbering. If the property is missing the
> + * probe would fail so just skip it here.
> + */
> +
> + ret = of_property_read_u32(np, "bus", &bus_num);
> + if (ret)
> + continue;
> +
> + ret = snprintf(bus_id, sizeof(bus_id), "i2c-%u", bus_num);
> + if (ret >= sizeof(bus_id))
> + continue;
> +
> + of_platform_device_create(np, bus_id, &pdev->dev);
> + of_node_put(np);
> + }
> +
> + return 0;
> +}
> +
> +static int aspeed_i2c_remove_controller(struct platform_device *pdev)
> +{
> + struct aspeed_i2c_controller *controller = platform_get_drvdata(pdev);
> +
> + irq_domain_remove(controller->irq_domain);
> + return 0;
> +}
> +
> +static const struct of_device_id aspeed_i2c_controller_of_table[] = {
> + { .compatible = "aspeed,ast2400-i2c-controller", },
> + { .compatible = "aspeed,ast2500-i2c-controller", },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, aspeed_i2c_controller_of_table);
> +
> +static struct platform_driver aspeed_i2c_controller_driver = {
> + .probe = aspeed_i2c_probe_controller,
> + .remove = aspeed_i2c_remove_controller,
> + .driver = {
> + .name = "ast-i2c-controller",
> + .of_match_table = aspeed_i2c_controller_of_table,
> + },
> +};
> +
> +static int __init aspeed_i2c_driver_init(void)
> +{
> + int ret;
> +
> + ret = platform_driver_register(&aspeed_i2c_controller_driver);
> + if (ret < 0)
> + return ret;
> + return platform_driver_register(&aspeed_i2c_bus_driver);
> +}
> +module_init(aspeed_i2c_driver_init);
> +
> +static void __exit aspeed_i2c_driver_exit(void)
> +{
> + platform_driver_unregister(&aspeed_i2c_bus_driver);
> + platform_driver_unregister(&aspeed_i2c_controller_driver);
> +}
> +module_exit(aspeed_i2c_driver_exit);
> +
> +MODULE_AUTHOR("Brendan Higgins <brendanhiggins at google.com>");
> +MODULE_DESCRIPTION("Aspeed I2C Bus Driver");
> +MODULE_LICENSE("GPL");
> --
> 2.8.0.rc3.226.g39d4020
>
More information about the openbmc
mailing list