July 2013 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Mon Jul 1 01:53:49 EST 2013
Ending: Mon Jul 22 10:55:58 EST 2013
Messages: 1335

• [PATCH V3] of: Set the DMA mask to 64 bits when dma_addr_t is 64-bits   Laura Abbott
• [PATCH V3] of: Set the DMA mask to 64 bits when dma_addr_t is 64-bits   Laura Abbott
• Best practice device tree design for display subsystems/DRM   Dave Airlie
• Best practice device tree design for display subsystems/DRM   Dave Airlie
• [PATCH 2/4] ARM: Enable PCI Express on ARM   Pratyush Anand
• [PATCH 3/4] PCI: Add driver for i.MX6 PCI Express   Pratyush Anand
• [PATCH 3/4] PCI: Add driver for i.MX6 PCI Express   Pratyush Anand
• [PATCH 4/4] iio: lps331ap: Add support for DT   Jacek Anaszewski
• [PATCH V3 1/2] tps6507x-ts: Add DT support   Manish Badarkhe
• [RFC] wlcore: sdio: add wilink clock providers   Felipe Balbi
• [PATCH v2 2/9] wlcore: use irq_flags in pdata instead of hiding it behind a quirk   Felipe Balbi
• [PATCH v2 4/9] wl12xx: use frequency instead of enumerations for pdata clocks   Felipe Balbi
• [PATCH v2 5/9] wlcore: always use one-shot IRQ   Felipe Balbi
• [PATCH v2 7/9] wlcore: sdio: add wilink clock providers   Felipe Balbi
• [PATCH v2 8/9] wlcore: sdio: get clocks from device tree   Felipe Balbi
• [PATCH v2 7/9] wlcore: sdio: add wilink clock providers   Felipe Balbi
• [PATCH v2 8/9] wlcore: sdio: get clocks from device tree   Felipe Balbi
• [PATCH v9 0/8] Generic PHY Framework   Felipe Balbi
• [PATCH v3 1/8] wl1251: split wl251 platform data to a separate structure   Felipe Balbi
• [PATCH v3 2/8] wlcore: set irq_flags in the board files instead of hiding behind a quirk   Felipe Balbi
• [PATCH v3 3/8] wlcore: remove pwr_in_suspend from platform data   Felipe Balbi
• [PATCH v3 4/8] wl12xx: use frequency instead of enumerations for pdata clocks   Felipe Balbi
• [PATCH v3 5/8] wlcore: add initial device tree support to the sdio module   Felipe Balbi
• [PATCH v3 8/8] wlcore/wl12xx: check if we got correct clock data from DT   Felipe Balbi
• [PATCH v3 2/8] wlcore: set irq_flags in the board files instead of hiding behind a quirk   Felipe Balbi
• [PATCH v9 0/8] Generic PHY Framework   Felipe Balbi
• [PATCH 1/4] usb: gadget: s3c-hsotg: Allow driver instantiation using device tree   Felipe Balbi
• [PATCH v2 1/3] mmc: omap_hsmmc: Enable SDIO IRQ using a GPIO in idle mode.   Felipe Balbi
• [PATCH v2 2/3] mmc: omap_hsmmc: debugfs entries for GPIO mode.   Felipe Balbi
• [PATCH v2 3/3] mmc: omap_hsmmc: add PSTATE to debugfs regs_show.   Felipe Balbi
• [PATCH v9 0/8] Generic PHY Framework   Felipe Balbi
• [PATCH v9 0/8] Generic PHY Framework   Felipe Balbi
• [PATCH v9 0/8] Generic PHY Framework   Felipe Balbi
• [PATCH] usb: phy: samsung-usb2: Toggle HSIC GPIO from device tree   Felipe Balbi
• [PATCH] usb: phy: samsung-usb2: Toggle HSIC GPIO from device tree   Felipe Balbi
• [PATCH v6] usb: dwc3: use extcon fwrk to receive connect/disconnect   Felipe Balbi
• [PATCH 1/3] misc: Add crossbar driver   Felipe Balbi
• [PATCH 3/4] PCI: Add driver for i.MX6 PCI Express   Arnd Bergmann
• [PATCH v10] i2c-designware: make SDA hold time configurable   Arnd Bergmann
• [PATCH v5 00/12] MBus DT binding: A new hope   Arnd Bergmann
• [PATCH v4 0/4] mtd:nand:omap2: clean-up of supported ECC schemes   Arnd Bergmann
• [PATCH v4 0/4] mtd:nand:omap2: clean-up of supported ECC schemes   Arnd Bergmann
• [PATCH v10] i2c-designware: make SDA hold time configurable   Arnd Bergmann
• [PATCH v10] i2c-designware: make SDA hold time configurable   Arnd Bergmann
• [PATCH v10] i2c-designware: make SDA hold time configurable   Arnd Bergmann
• [PATCH v10] i2c-designware: make SDA hold time configurable   Arnd Bergmann
• Appended DTB files for multi-machine kernels   Arnd Bergmann
• [PATCH v6 00/21] MBus DT binding: PCIe strikes back   Arnd Bergmann
• [PATCH v6 00/21] MBus DT binding: PCIe strikes back   Arnd Bergmann
• [PATCH v6 00/21] MBus DT binding: PCIe strikes back   Arnd Bergmann
• [PATCH v3 4/4] ARM: reinsert ARCH_MULTI_V4 Kconfig option   Arnd Bergmann
• [PATCH V3 2/3] clocksource: mmp: support CLOCKSOURCE OF DECLARE   Arnd Bergmann
• [PATCH V3 3/3] ARM: mmp: bring up pxa988 with device tree support   Arnd Bergmann
• [PATCH RFC 5/8] dma: mpc512x: use symbolic specifiers for DMA channels   Arnd Bergmann
• [PATCH RFC 5/8] dma: mpc512x: use symbolic specifiers for DMA channels   Arnd Bergmann
• [PATCH V3 1/3] dts: change Marvell prefix to 'marvell'   Arnd Bergmann
• [PATCH v4 0/4] mtd:nand:omap2: clean-up of supported ECC schemes   Artem Bityutskiy
• [PATCH v3 0/5] clk: dt: bindings for mux, divider & gate clocks   Stephen Boyd
• [PATCH v4 0/5] Memory mapped architected timers   Stephen Boyd
• [PATCH v4 2/5] Documentation: Add memory mapped ARM architected timer binding   Stephen Boyd
• [PATCH 1/3] ARM: msm: dts: Fix the gpio register address for msm8960   David Brown
• [PATCH] of/platform: Staticize of_platform_device_create_pdata()   Mark Brown
• [PATCH -next] spi: tegra114: remove redundant dev_err call in tegra_spi_probe()   Mark Brown
• [PATCH] ASoC: mop500: add .owner to struct snd_soc_card   Mark Brown
• [PATCH 1/1] of/documentation: Update s5m8767-regulator bindings document   Mark Brown
• [PATCH v9 01/10] ASoC: imx-pcm-dma: DT support   Mark Brown
• [PATCH v9 02/10] ASoC: imx-pcm-fiq: Introduce pcm-fiq-params   Mark Brown
• [PATCH v9 04/10] ASoC: fsl-ssi: Add support for imx-pcm-fiq   Mark Brown
• [PATCH v9 03/10] ASoC: fsl: Move soc_ac97_ops from imx-ssi to fsl_ssi   Mark Brown
• [PATCH v9 08/10] ASoC: Add phycore-ac97-dt driver   Mark Brown
• [PATCH v9 09/10] ASoC: fsl: Move fsl-ssi binding doc to sound/   Mark Brown
• [PATCH v9 10/10] ASoC: fsl: Update fsl-ssi binding doc   Mark Brown
• [RFC PATCH v4 2/2] drivers: mfd: vexpress: add Serial Power Controller (SPC) support   Mark Brown
• [RFC PATCH V2 1/8] regulator: Introduce OMAP regulator to control PMIC over VC/VP   Mark Brown
• Appended DTB files for multi-machine kernels   Mark Brown
• [RFC PATCH V2 1/8] regulator: Introduce OMAP regulator to control PMIC over VC/VP   Mark Brown
• [RFC PATCH V2 1/8] regulator: Introduce OMAP regulator to control PMIC over VC/VP   Mark Brown
• [RFC PATCH V2 1/8] regulator: Introduce OMAP regulator to control PMIC over VC/VP   Mark Brown
• [RFC PATCH 08/13] sound: sam9x5_wm8731: machine driver for at91sam9x5 wm8731 boards   Mark Brown
• [PATCH v9 04/10] ASoC: fsl-ssi: Add support for imx-pcm-fiq   Mark Brown
• [PATCH v9 08/10] ASoC: Add phycore-ac97-dt driver   Mark Brown
• [PATCH] of/platform: Staticize of_platform_device_create_pdata()   Mark Brown
• [alsa-devel] [PATCH v2 3/5] ARM: AT91: DTS: sam9x5ek: add WM8731 codec   Mark Brown
• [PATCH v1 4/4] spi/xilinx: Use of_property_read_u32 for reading value from node   Mark Brown
• [PATCH v2 2/5] ARM: AT91: DTS: sam9x5: add SSC DMA parameters   Mark Brown
• [PATCH v1 4/4] spi/xilinx: Use of_property_read_u32 for reading value from node   Mark Brown
• [PATCH v2 1/5] sound: sam9x5_wm8731: machine driver for at91sam9x5 wm8731 boards   Mark Brown
• [PATCH v2 2/5] ARM: AT91: DTS: sam9x5: add SSC DMA parameters   Mark Brown
• [PATCH v4 0/7] Sound support for at91sam9x5-wm8731 based boards   Mark Brown
• [PATCH v4 1/7] sound: sam9x5_wm8731: machine driver for at91sam9x5 wm8731 boards   Mark Brown
• [PATCH v4 2/7] Documentation: DT: add sam9x5ek-wm8731 machine driver   Mark Brown
• [PATCH v4 3/7] Documentation: DT: update atmel SSC with DMA binding   Mark Brown
• [RFC PATCH V2 1/8] regulator: Introduce OMAP regulator to control PMIC over VC/VP   Mark Brown
• [RFC PATCH V2 1/8] regulator: Introduce OMAP regulator to control PMIC over VC/VP   Mark Brown
• [PATCH v4 1/7] sound: sam9x5_wm8731: machine driver for at91sam9x5 wm8731 boards   Mark Brown
• [PATCH v4 3/7] Documentation: DT: update atmel SSC with DMA binding   Mark Brown
• [PATCH] mfd: DT bindings for the palmas family MFD   Mark Brown
• [PATCH v5 1/7] sound: codec: wm8731: add rates constraints   Mark Brown
• [PATCH v5 2/7] sound: sam9x5_wm8731: machine driver for at91sam9x5 wm8731 boards   Mark Brown
• [PATCH v2] regulator: pfuze100: add pfuze100 regulator driver   Mark Brown
• [PATCH v2] regulator: pfuze100: add pfuze100 regulator driver   Mark Brown
• [PATCH v5 1/7] sound: codec: wm8731: add rates constraints   Mark Brown
• [Ksummit-2013-discuss] [ATTEND] Handling of devicetree bindings   Mark Brown
• [Ksummit-2013-discuss] [ATTEND] Handling of devicetree bindings   Mark Brown
• [PATCH v1 01/24] spi: mpc512x: prepare clocks before enabling them   Mark Brown
• [PATCH 1/2] ASoC: tlv320aic3x: Add compatible strings for specific devices   Mark Brown
• [PATCH 2/2] ASoC: tlv320aic3x: List tlv320aic3106 as a supported device   Mark Brown
• [PATCH] ASoC: imx-sgtl5000: fix error return code in imx_sgtl5000_probe()   Mark Brown
• [PATCH 0/2] regulator: palmas-pmic: doc: update device tree bindings   Mark Brown
• [PATCH V2 0/2] regulator: palmas-pmic: doc: update device tree bindings   Mark Brown
• [PATCH v1 01/24] spi: mpc512x: prepare clocks before enabling them   Mark Brown
• [patch] spi/xilinx: signedness issue checking platform_get_irq()   Mark Brown
• [PATCH v1 01/24] spi: mpc512x: prepare clocks before enabling them   Mark Brown
• [patch v2] spi/xilinx: signedness issue checking platform_get_irq()   Mark Brown
• [PATCH v1 05/24] clk: wrap I/O access for improved portability   Mark Brown
• [PATCH v2 01/24] spi: mpc512x: cleanup clock API use   Mark Brown
• [PATCH v3] regulator: pfuze100: add pfuze100 regulator driver   Mark Brown
• [PATCH] ASoC: atmel: add wm8904 based audio machine driver   Mark Brown
• [PATCH RFC 2/3] dt:net:stmmac: Add support to dwmac version 3.610 and 3.710   Giuseppe CAVALLARO
• [PATCH RFC 1/3] dt:net:stmmac: Allocate platform data only if its NULL.   Giuseppe CAVALLARO
• [PATCH RFC 1/3] dt:net:stmmac: Allocate platform data only if its NULL.   Giuseppe CAVALLARO
• [PATCH RFC 2/3] dt:net:stmmac: Add support to dwmac version 3.610 and 3.710   Giuseppe CAVALLARO
• [PATCH] of: provide of_platform_unpopulate()   NAVEEN KRISHNA CHATRADHI
• [PATCH] of: provide of_platform_unpopulate()   NAVEEN KRISHNA CHATRADHI
• [PATCHv3 1/3] iio: Add Nuvoton NAU7802 ADC driver   Jonathan Cameron
• [PATCHv3 2/3] ARM: mxs: cfa10049: Switch bus i2c1 to bitbanging   Jonathan Cameron
• [PATCHv3 1/3] iio: Add Nuvoton NAU7802 ADC driver   Jonathan Cameron
• [PATCH v3 2/2] iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver   Jonathan Cameron
• [PATCH 2/2] iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver   Jonathan Cameron
• [PATCH 2/5] iio: at91: Use different prescal, startup mask in MR for different IP   Jonathan Cameron
• [PATCH 2/2] iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver   Jonathan Cameron
• [PATCH v2 5/5] iio: mxs-lradc: add write_raw function to modify scale   Jonathan Cameron
• [PATCH v2 5/5] iio: mxs-lradc: add write_raw function to modify scale   Jonathan Cameron
• [PATCH v6 2/2] iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver   Jonathan Cameron
• [PATCH 1/3] iio: core: implement devm_iio_device_alloc/devm_iio_device_free   Jonathan Cameron
• [PATCH 3/3] iio: add APDS9300 ambilent light sensor driver   Jonathan Cameron
• [PATCH v3 2/8] wlcore: set irq_flags in the board files instead of hiding behind a quirk   Javier Martinez Canillas
• [patch] spi/xilinx: signedness issue checking platform_get_irq()   Dan Carpenter
• [patch] spi/xilinx: signedness issue checking platform_get_irq()   Dan Carpenter
• [patch v2] spi/xilinx: signedness issue checking platform_get_irq()   Dan Carpenter
• [Ksummit-2013-discuss] [ATTEND] Handling of devicetree bindings   Chaiken, Alison
• [PATCH 1/2] extcon: palmas: rename device tree binding matching with file name   Chanwoo Choi
• [PATCH 2/4] extcon: palmas: enable ID_GND and ID_FLOAT detection always   Chanwoo Choi
• [PATCH V2 4/4] extcon: palmas: Option to disable ID/VBUS detection based on platform   Chanwoo Choi
• [PATCH V2 0/4] extcon: palmas: clean-up/fixes and suspend/resume susupport   Chanwoo Choi
• [PATCH V2 2/4] extcon: palmas: enable ID_GND and ID_FLOAT detection always   Chanwoo Choi
• [PATCH V2 4/4] extcon: palmas: Option to disable ID/VBUS detection based on platform   Chanwoo Choi
• [PATCH V3] extcon: palmas: Option to disable ID/VBUS detection based on platform   Chanwoo Choi
• [PATCH V3] extcon: palmas: Option to disable ID/VBUS detection based on platform   Chanwoo Choi
• [PATCH v6] usb: dwc3: use extcon fwrk to receive connect/disconnect   Chanwoo Choi
• Best practice device tree design for display subsystems/DRM   Rob Clark
• Best practice device tree design for display subsystems/DRM   Rob Clark
• [alsa-devel] [PATCH] ASoC: Add PCM1681 codec driver.   Lars-Peter Clausen
• [PATCH 4/4] iio: lps331ap: Add support for DT   Lars-Peter Clausen
• [PATCH 1/1] Added Capella CM3218 Ambient Light Sensor IIO Driver.   Lars-Peter Clausen
• [PATCHv3 1/3] iio: Add Nuvoton NAU7802 ADC driver   Lars-Peter Clausen
• [alsa-devel] [PATCH v2 1/5] sound: sam9x5_wm8731: machine driver for at91sam9x5 wm8731 boards   Lars-Peter Clausen
• [PATCH RFC 0/8] MPC512x DMA slave s/g support, OF DMA lookup   Lars-Peter Clausen
• [PATCH] iio: add APDS9300 ambilent light sensor driver   Lars-Peter Clausen
• [PATCH v3 2/2] iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver   Lars-Peter Clausen
• [PATCH RFC 5/8] dma: mpc512x: use symbolic specifiers for DMA channels   Lars-Peter Clausen
• [PATCH RFC 1/8] powerpc: mpc512x_dma: add support for data transfers between memory and i/o memory   Lars-Peter Clausen
• [PATCH v3 2/2] iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver   Lars-Peter Clausen
• [PATCH v3 2/2] iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver   Lars-Peter Clausen
• [PATCH] iio: add APDS9300 ambilent light sensor driver   Lars-Peter Clausen
• [PATCH] iio: add APDS9300 ambilent light sensor driver   Lars-Peter Clausen
• [PATCH RFC v2 2/5] dma: mpc512x: add support for peripheral transfers   Lars-Peter Clausen
• [PATCH v3 2/2] iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver   Lars-Peter Clausen
• [PATCH v5 1/2] ARM: dts: twl: Add GPADC data to device tree   Lars-Peter Clausen
• [PATCH v5 2/2] iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver   Lars-Peter Clausen
• [PATCH v5 2/2] iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver   Lars-Peter Clausen
• [PATCH 1/3] iio: core: implement devm_iio_device_alloc/devm_iio_device_free   Lars-Peter Clausen
• [PATCH] Documentation: dt: bindings: TI WiLink modules   Luciano Coelho
• [RFC] wlcore: sdio: add wilink clock providers   Luciano Coelho
• [RFC] wlcore: sdio: add wilink clock providers   Luciano Coelho
• [PATCH v2 0/9] wilink: add device tree support   Luciano Coelho
• [PATCH v2 1/9] wl1251: split wl251 platform data to a separate structure   Luciano Coelho
• [PATCH v2 2/9] wlcore: use irq_flags in pdata instead of hiding it behind a quirk   Luciano Coelho
• [PATCH v2 3/9] wlcore: remove pwr_in_suspend from platform data   Luciano Coelho
• [PATCH v2 4/9] wl12xx: use frequency instead of enumerations for pdata clocks   Luciano Coelho
• [PATCH v2 5/9] wlcore: always use one-shot IRQ   Luciano Coelho
• [PATCH v2 6/9] wlcore: add initial device tree support to the sdio module   Luciano Coelho
• [PATCH v2 7/9] wlcore: sdio: add wilink clock providers   Luciano Coelho
• [PATCH v2 8/9] wlcore: sdio: get clocks from device tree   Luciano Coelho
• [PATCH v2 9/9] wlcore/wl12xx: check if we got correct clock data from DT   Luciano Coelho
• [PATCH v2 2/9] wlcore: use irq_flags in pdata instead of hiding it behind a quirk   Luciano Coelho
• [PATCH v2 4/9] wl12xx: use frequency instead of enumerations for pdata clocks   Luciano Coelho
• [PATCH v2 5/9] wlcore: always use one-shot IRQ   Luciano Coelho
• [PATCH v2 8/9] wlcore: sdio: get clocks from device tree   Luciano Coelho
• [PATCH v2 4/9] wl12xx: use frequency instead of enumerations for pdata clocks   Luciano Coelho
• [PATCH v2 8/9] wlcore: sdio: get clocks from device tree   Luciano Coelho
• [PATCH v2 4/9] wl12xx: use frequency instead of enumerations for pdata clocks   Luciano Coelho
• [PATCH v2 0/9] wilink: add device tree support   Luciano Coelho
• [PATCH v3 0/8] wilink: add device tree support   Luciano Coelho
• [PATCH v3 1/8] wl1251: split wl251 platform data to a separate structure   Luciano Coelho
• [PATCH v3 2/8] wlcore: set irq_flags in the board files instead of hiding behind a quirk   Luciano Coelho
• [PATCH v3 3/8] wlcore: remove pwr_in_suspend from platform data   Luciano Coelho
• [PATCH v3 4/8] wl12xx: use frequency instead of enumerations for pdata clocks   Luciano Coelho
• [PATCH v3 5/8] wlcore: add initial device tree support to the sdio module   Luciano Coelho
• [PATCH v3 6/8] wlcore: sdio: add wilink clock providers   Luciano Coelho
• [PATCH v3 7/8] wlcore: sdio: get clocks from device tree   Luciano Coelho
• [PATCH v3 8/8] wlcore/wl12xx: check if we got correct clock data from DT   Luciano Coelho
• [PATCH v3 2/8] wlcore: set irq_flags in the board files instead of hiding behind a quirk   Luciano Coelho
• [PATCH v3 2/8] wlcore: set irq_flags in the board files instead of hiding behind a quirk   Luciano Coelho
• [PATCH v3 2/8] wlcore: set irq_flags in the board files instead of hiding behind a quirk   Luciano Coelho
• [PATCH] Documentation: dt: bindings: TI WiLink modules   Luciano Coelho
• [PATCH V3 1/3] dts: change Marvell prefix to 'marvell'   Jason Cooper
• [PATCH v7 11/22] PCI: mvebu: Adapt to the new device tree layout   Jason Cooper
• [PATCH v7 11/22] PCI: mvebu: Adapt to the new device tree layout   Jason Cooper
• [PATCH V3 1/3] dts: change Marvell prefix to 'marvell'   Jason Cooper
• [PATCH V3 1/3] dts: change Marvell prefix to 'marvell'   Jason Cooper
• [PATCH V3 1/3] dts: change Marvell prefix to 'marvell'   Jason Cooper
• [PATCH V3 1/3] dts: change Marvell prefix to 'marvell'   Jason Cooper
• [PATCH V3 1/3] dts: change Marvell prefix to 'marvell'   Jason Cooper
• [PATCH V3 1/3] dts: change Marvell prefix to 'marvell'   Jason Cooper
• [PATCH V3 1/3] dts: change Marvell prefix to 'marvell'   Jason Cooper
• [PATCH 06/10] watchdog: orion: Update device-tree binding documentation   Jason Cooper
• [PATCH 00/10] Orion Watchdog fixes   Jason Cooper
• [PATCH 00/10] Orion Watchdog fixes   Jason Cooper
• [PATCH 0/4] Add PCI Express to i.MX6   Sean Cross
• [PATCH 1/4] ARM i.MX6q: Add descriptors for LVDS clocks   Sean Cross
• [PATCH 2/4] ARM: Enable PCI Express on ARM   Sean Cross
• [PATCH 3/4] PCI: Add driver for i.MX6 PCI Express   Sean Cross
• [PATCH 4/4] ARM i.MX6: Add PCI Express to device tree   Sean Cross
• [PATCH 3/4] PCI: Add driver for i.MX6 PCI Express   Sean Cross
• [PATCH 3/4] PCI: Add driver for i.MX6 PCI Express   Sean Cross
• Best practice device tree design for display subsystems/DRM   Inki Dae
• Best practice device tree design for display subsystems/DRM   Inki Dae
• Best practice device tree design for display subsystems/DRM   Inki Dae
• Best practice device tree design for display subsystems/DRM   Inki Dae
• Best practice device tree design for display subsystems/DRM   Inki Dae
• Best practice device tree design for display subsystems/DRM   Inki Dae
• Best practice device tree design for display subsystems/DRM   Inki Dae
• Best practice device tree design for display subsystems/DRM   Inki Dae
• [PATCH v3 5/7] ARM: shmobile: r8a7740: add DT nodes for three DMAC instance   Magnus Damm
• [PATCH v3 5/7] ARM: shmobile: r8a7740: add DT nodes for three DMAC instance   Magnus Damm
• Appended DTB files for multi-machine kernels   Magnus Damm
• [PATCH 1/2] extcon: palmas: rename device tree binding matching with file name   Laxman Dewangan
• [PATCH 2/2] extcon: palmas: devicetree: remove non-require property details   Laxman Dewangan
• [PATCH 0/4] extcon: palmas: clean-up/fixes and suspend/resume susupport.   Laxman Dewangan
• [PATCH 1/4] extcon: palmas: remove unused member from palams_usb structure   Laxman Dewangan
• [PATCH 2/4] extcon: palmas: enable ID_GND and ID_FLOAT detection always   Laxman Dewangan
• [PATCH 3/4] extcon: palams: add support for suspend/resume   Laxman Dewangan
• [PATCH 4/4] extcon: palmas: Option to disable ID/VBUS detection based on platform   Laxman Dewangan
• [PATCH V2 0/4] extcon: palmas: clean-up/fixes and suspend/resume susupport   Laxman Dewangan
• [PATCH V2 1/4] extcon: palmas: remove unused member from palams_usb structure   Laxman Dewangan
• [PATCH V2 2/4] extcon: palmas: enable ID_GND and ID_FLOAT detection always   Laxman Dewangan
• [PATCH V2 3/4] extcon: palams: add support for suspend/resume   Laxman Dewangan
• [PATCH V2 4/4] extcon: palmas: Option to disable ID/VBUS detection based on platform   Laxman Dewangan
• [PATCH V2 4/4] extcon: palmas: Option to disable ID/VBUS detection based on platform   Laxman Dewangan
• [PATCH V2 0/4] extcon: palmas: clean-up/fixes and suspend/resume susupport   Laxman Dewangan
• [PATCH V2 2/4] extcon: palmas: enable ID_GND and ID_FLOAT detection always   Laxman Dewangan
• [PATCH V2 4/4] extcon: palmas: Option to disable ID/VBUS detection based on platform   Laxman Dewangan
• [PATCH V3] extcon: palmas: Option to disable ID/VBUS detection based on platform   Laxman Dewangan
• [PATCH V3] extcon: palmas: Option to disable ID/VBUS detection based on platform   Laxman Dewangan
• Best practice device tree design for display subsystems/DRM   Daniel Drake
• Best practice device tree design for display subsystems/DRM   Daniel Drake
• Best practice device tree design for display subsystems/DRM   Daniel Drake
• [PATCH V3 1/3] dts: change Marvell prefix to 'marvell'   Daniel Drake
• [PATCH V3 1/3] dts: change Marvell prefix to 'marvell'   Daniel Drake
• [PATCH V3 1/3] dts: change Marvell prefix to 'marvell'   Daniel Drake
• DT binding review for Armada display subsystem   Daniel Drake
• DT binding review for Armada display subsystem   Daniel Drake
• DT binding review for Armada display subsystem   Daniel Drake
• [PATCH V3 1/3] dts: change Marvell prefix to 'marvell'   Daniel Drake
• DT binding review for Armada display subsystem   Daniel Drake
• [PATCH RESEND 1/2] ARM: mmp: Add compatible entries for OLPC XO laptops   Daniel Drake
• [PATCH RESEND 2/2] ARM: mmp: irq: Improve DT layout   Daniel Drake
• [PATCH RESEND 1/2] clk: mmp: use global clock lock   Daniel Drake
• [PATCH RESEND 2/2] clk: mmp: add support for DT-defined clocks   Daniel Drake
• [PATCH -next] Input: olpc_apsp - remove redundant dev_err call in olpc_apsp_probe()   Daniel Drake
• DT binding review for Armada display subsystem   Daniel Drake
• [PATCHv3 2/3] ARM: mxs: cfa10049: Switch bus i2c1 to bitbanging   Fabio Estevam
• [PATCHv3 2/3] ARM: mxs: cfa10049: Switch bus i2c1 to bitbanging   Fabio Estevam
• [PATCH v6] video: imxfb: Add DT support   Fabio Estevam
• [PATCH v3 2/6] misc: sram: add ability to mark sram sections as reserved   Fabio Estevam
• [PATCH v3 6/6] ARM: rockchip: add smp bringup code   Fabio Estevam
• [alsa-devel] [PATCH v9 08/10] ASoC: Add phycore-ac97-dt driver   Fabio Estevam
• [PATCH] usb: phy: samsung-usb2: Toggle HSIC GPIO from device tree   Fabio Estevam
• Fixed PHY Device Tree usage?   Florian Fainelli
• Fixed PHY Device Tree usage?   Florian Fainelli
• Fixed PHY Device Tree usage?   Florian Fainelli
• Fixed PHY Device Tree usage?   Florian Fainelli
• Fixed PHY Device Tree usage?   Florian Fainelli
• [RFC PATCH 2/3] net: phy: call mdiobus_scan() after adding a fixed PHY   Florian Fainelli
• [RFC PATCH 1/3] of: provide a binding for the 'fixed-link' property   Florian Fainelli
• [PATCH v2 0/5] Sound support for at91sam9x5-wm8731 based boards   Nicolas Ferre
• [PATCH v3 3/7] Documentation: DT: update atmel SSC with DMA binding   Nicolas Ferre
• [PATCH 2/5] iio: at91: Use different prescal, startup mask in MR for different IP   Nicolas Ferre
• [PATCH v10] i2c: exynos5: add High Speed I2C controller driver   Tomasz Figa
• [PATCH V4 4/4] video: exynos_dp: Use the generic PHY driver   Tomasz Figa
• [PATCH V4 3/4] video: exynos_dp: remove non-DT support for Exynos Display Port   Tomasz Figa
• [PATCH V4 2/4] phy: Add driver for Exynos DP PHY   Tomasz Figa
• [PATCH V4 1/4] ARM: dts: Add DP PHY node to exynos5250.dtsi   Tomasz Figa
• [PATCH v3 07/13] ARM: dts: Add AK8975 device node for Exynos4412 TRATS2 board   Tomasz Figa
• [PATCH v3 08/13] ARM: dts: Add camera device nodes for Exynos4412 TRATS2 board   Tomasz Figa
• [PATCH v3 12/13] ARM: dts: Add S5K5BA sensor regulator definitions for Trats board   Tomasz Figa
• [PATCH v3 00/13] ARM: dts: Add camera and magnetometer support for TRATS(2) board   Tomasz Figa
• [PATCH 2/3] of/documentation: Update G2D documentation   Tomasz Figa
• [PATCH v3 12/13] ARM: dts: Add S5K5BA sensor regulator definitions for Trats board   Tomasz Figa
• [PATCH v2 Resend 2/3] of/documentation: Update G2D documentation   Tomasz Figa
• [PATCH] usb: phy: samsung-usb2: Toggle HSIC GPIO from device tree   Tomasz Figa
• DT binding review for Armada display subsystem   Tomasz Figa
• The future of DT binding maintainership   Tomasz Figa
• [PATCH 01/15] drivers: phy: add generic PHY framework   Tomasz Figa
• [PATCH 01/15] drivers: phy: add generic PHY framework   Tomasz Figa
• [PATCH V2 1/2] DMA: Freescale: Add new 8-channel DMA engine device tree nodes   Kumar Gala
• [PATCH V2 1/2] DMA: Freescale: Add new 8-channel DMA engine device tree nodes   Kumar Gala
• [PATCH v6 00/21] MBus DT binding: PCIe strikes back   Ezequiel Garcia
• [PATCH v6 01/21] memory: mvebu-devbus: Remove address decoding window workaround   Ezequiel Garcia
• [PATCH v6 02/21] bus: mvebu-mbus: Add new API for window creation   Ezequiel Garcia
• [PATCH v6 03/21] ARM: kirkwood: Move to ID based MBus window creation   Ezequiel Garcia
• [PATCH v6 04/21] ARM: mv78xx0: Move to ID based window creation   Ezequiel Garcia
• [PATCH v6 05/21] ARM: orion5x: Move to ID based window creation   Ezequiel Garcia
• [PATCH v6 06/21] ARM: dove: Move to ID based window creation   Ezequiel Garcia
• [PATCH v6 07/21] bus: mvebu-mbus: Factor out initialization details   Ezequiel Garcia
• [PATCH v6 08/21] bus: mvebu-mbus: Introduce device tree binding   Ezequiel Garcia
• [PATCH v6 09/21] bus: mvebu-mbus: Add static window allocation to the binding   Ezequiel Garcia
• [PATCH v6 10/21] pci: mvebu: Adapt to the new device tree layout   Ezequiel Garcia
• [PATCH v6 11/21] bus: mvebu-mbus: Remove the no longer used name-based API   Ezequiel Garcia
• [PATCH v6 12/21] bus: mvebu-mbus: Remove name -> target, attribute mapping tables   Ezequiel Garcia
• [PATCH v6 13/21] bus: mvebu-mbus: Update main description   Ezequiel Garcia
• [PATCH v6 14/21] bus: mvebu-mbus: Factorize Armada 370/XP data structures   Ezequiel Garcia
• [PATCH v6 15/21] ARM: mvebu: Remove the harcoded BootROM window allocation   Ezequiel Garcia
• [PATCH v6 16/21] ARM: mvebu: Initialize MBus using the DT binding   Ezequiel Garcia
• [PATCH v6 17/21] ARM: mvebu: Use the preprocessor on Armada 370/XP device tree files   Ezequiel Garcia
• [PATCH v6 18/21] ARM: mvebu: Add MBus to Armada 370/XP device tree   Ezequiel Garcia
• [PATCH v6 19/21] ARM: mvebu: Add BootROM to Armada 370/XP device tree   Ezequiel Garcia
• [PATCH v6 20/21] ARM: mvebu: Relocate Armada 370/XP DeviceBus device tree nodes   Ezequiel Garcia
• [PATCH v6 21/21] ARM: mvebu: Relocate Armada 370/XP PCIe device tree nodes   Ezequiel Garcia
• [PATCH v6 00/21] MBus DT binding: PCIe strikes back   Ezequiel Garcia
• [PATCH v7 00/22] MBus DT binding: The return of PCIe   Ezequiel Garcia
• [PATCH v7 01/22] memory: mvebu-devbus: Remove address decoding window workaround   Ezequiel Garcia
• [PATCH v7 02/22] bus: mvebu-mbus: Add new API for window creation   Ezequiel Garcia
• [PATCH v7 03/22] ARM: kirkwood: Move to ID based MBus window creation   Ezequiel Garcia
• [PATCH v7 04/22] ARM: mv78xx0: Move to ID based window creation   Ezequiel Garcia
• [PATCH v7 05/22] ARM: orion5x: Move to ID based window creation   Ezequiel Garcia
• [PATCH v7 06/22] ARM: dove: Move to ID based window creation   Ezequiel Garcia
• [PATCH v7 07/22] bus: mvebu-mbus: Factor out initialization details   Ezequiel Garcia
• [PATCH v7 08/22] bus: mvebu-mbus: Introduce device tree binding   Ezequiel Garcia
• [PATCH v7 09/22] bus: mvebu-mbus: Add static window allocation to the DT binding   Ezequiel Garcia
• [PATCH v7 10/22] bus: mvebu-mbus: Add new API for the PCIe memory and IO aperture   Ezequiel Garcia
• [PATCH v7 11/22] PCI: mvebu: Adapt to the new device tree layout   Ezequiel Garcia
• [PATCH v7 12/22] bus: mvebu-mbus: Remove the no longer used name-based API   Ezequiel Garcia
• [PATCH v7 13/22] bus: mvebu-mbus: Remove name -> target, attribute mapping tables   Ezequiel Garcia
• [PATCH v7 14/22] bus: mvebu-mbus: Update main description   Ezequiel Garcia
• [PATCH v7 15/22] bus: mvebu-mbus: Factorize Armada 370/XP data structures   Ezequiel Garcia
• [PATCH v7 16/22] ARM: mvebu: Remove the harcoded BootROM window allocation   Ezequiel Garcia
• [PATCH v7 17/22] ARM: mvebu: Initialize MBus using the DT binding   Ezequiel Garcia
• [PATCH v7 18/22] ARM: mvebu: Use the preprocessor on Armada 370/XP device tree files   Ezequiel Garcia
• [PATCH v7 19/22] ARM: mvebu: Add MBus to Armada 370/XP device tree   Ezequiel Garcia
• [PATCH v7 20/22] ARM: mvebu: Add BootROM to Armada 370/XP device tree   Ezequiel Garcia
• [PATCH v7 21/22] ARM: mvebu: Relocate Armada 370/XP DeviceBus device tree nodes   Ezequiel Garcia
• [PATCH v7 22/22] ARM: mvebu: Relocate Armada 370/XP PCIe device tree nodes   Ezequiel Garcia
• [PATCH v7 11/22] PCI: mvebu: Adapt to the new device tree layout   Ezequiel Garcia
• [RESEND PATCH v7 00/22] MBus DT binding: The return of PCIe   Ezequiel Garcia
• [RESEND PATCH v7 01/22] memory: mvebu-devbus: Remove address decoding window workaround   Ezequiel Garcia
• [RESEND PATCH v7 02/22] bus: mvebu-mbus: Add new API for window creation   Ezequiel Garcia
• [RESEND PATCH v7 03/22] ARM: kirkwood: Move to ID based MBus window creation   Ezequiel Garcia
• [RESEND PATCH v7 04/22] ARM: mv78xx0: Move to ID based window creation   Ezequiel Garcia
• [RESEND PATCH v7 05/22] ARM: orion5x: Move to ID based window creation   Ezequiel Garcia
• [RESEND PATCH v7 06/22] ARM: dove: Move to ID based window creation   Ezequiel Garcia
• [RESEND PATCH v7 07/22] bus: mvebu-mbus: Factor out initialization details   Ezequiel Garcia
• [RESEND PATCH v7 08/22] bus: mvebu-mbus: Introduce device tree binding   Ezequiel Garcia
• [RESEND PATCH v7 09/22] bus: mvebu-mbus: Add static window allocation to the DT binding   Ezequiel Garcia
• [RESEND PATCH v7 10/22] bus: mvebu-mbus: Add new API for the PCIe memory and IO aperture   Ezequiel Garcia
• [RESEND PATCH v7 11/22] PCI: mvebu: Adapt to the new device tree layout   Ezequiel Garcia
• [RESEND PATCH v7 12/22] bus: mvebu-mbus: Remove the no longer used name-based API   Ezequiel Garcia
• [RESEND PATCH v7 13/22] bus: mvebu-mbus: Remove name -> target, attribute mapping tables   Ezequiel Garcia
• [RESEND PATCH v7 14/22] bus: mvebu-mbus: Update main description   Ezequiel Garcia
• [RESEND PATCH v7 15/22] bus: mvebu-mbus: Factorize Armada 370/XP data structures   Ezequiel Garcia
• [RESEND PATCH v7 16/22] ARM: mvebu: Remove the harcoded BootROM window allocation   Ezequiel Garcia
• [RESEND PATCH v7 17/22] ARM: mvebu: Initialize MBus using the DT binding   Ezequiel Garcia
• [RESEND PATCH v7 18/22] ARM: mvebu: Use the preprocessor on Armada 370/XP device tree files   Ezequiel Garcia
• [RESEND PATCH v7 19/22] ARM: mvebu: Add MBus to Armada 370/XP device tree   Ezequiel Garcia
• [RESEND PATCH v7 20/22] ARM: mvebu: Add BootROM to Armada 370/XP device tree   Ezequiel Garcia
• [RESEND PATCH v7 21/22] ARM: mvebu: Relocate Armada 370/XP DeviceBus device tree nodes   Ezequiel Garcia
• [RESEND PATCH v7 22/22] ARM: mvebu: Relocate Armada 370/XP PCIe device tree nodes   Ezequiel Garcia
• [PATCH 00/10] Orion Watchdog fixes   Ezequiel Garcia
• [PATCH 01/10] clocksource: orion: Add thread-safe API header   Ezequiel Garcia
• [PATCH 02/10] watchdog: orion: Use thread-safe clocksource API   Ezequiel Garcia
• [PATCH 03/10] watchdog: orion: Rename device-tree binding documentation   Ezequiel Garcia
• [PATCH 04/10] watchdog: orion: Use the proper watchdog register   Ezequiel Garcia
• [PATCH 05/10] watchdog: orion: Add a memory resource for RSTOUT register   Ezequiel Garcia
• [PATCH 06/10] watchdog: orion: Update device-tree binding documentation   Ezequiel Garcia
• [PATCH 07/10] watchdog: orion: Remove unneeded BRIDGE_CAUSE clear   Ezequiel Garcia
• [PATCH 08/10] watchdog: orion: Remove mach-specific unneeded header   Ezequiel Garcia
• [PATCH 09/10] watchdog: orion: Use BIT()   Ezequiel Garcia
• [PATCH 10/10] ARM: kirkwood: Fix the device-tree watchdog's node reg property   Ezequiel Garcia
• [PATCH 00/10] Orion Watchdog fixes   Ezequiel Garcia
• [PATCH 00/10] Orion Watchdog fixes   Ezequiel Garcia
• [PATCH] ARM: Kirkwood: Fix the internal register ranges translation   Ezequiel Garcia
• [PATCH 00/10] Orion Watchdog fixes   Ezequiel Garcia
• [PATCH 05/10] watchdog: orion: Add a memory resource for RSTOUT register   Ezequiel Garcia
• [PATCH] ARM: Kirkwood: Fix the internal register ranges translation   Ezequiel Garcia
• [PATCH] ARM: Kirkwood: Fix the internal register ranges translation   Ezequiel Garcia
• [RESEND PATCH v7 00/22] MBus DT binding: The return of PCIe   Ezequiel Garcia
• [RESEND PATCH v7 00/22] MBus DT binding: The return of PCIe   Ezequiel Garcia
• [RESEND PATCH v7 00/22] MBus DT binding: The return of PCIe   Ezequiel Garcia
• [RFC PATCH 00/13] audio support for at91sam9x5ek board   Richard Genoud
• [RFC PATCH 01/13] misc: atmel_ssc: add device tree DMA support   Richard Genoud
• [RFC PATCH 02/13] misc: atmel_ssc: keep the count of pdev->id   Richard Genoud
• [RFC PATCH 03/13] ARM: at91: DTS: sam9x5: add clock for SSC DT entry   Richard Genoud
• [RFC PATCH 04/13] ARM: at91: DTS: sam9x5: add SSC DMA parameters   Richard Genoud
• [RFC PATCH 05/13] ARM: AT91: DTS: sam9x5ek: add WM8731 codec   Richard Genoud
• [RFC PATCH 06/13] ARM: AT91: DTS: sam9x5ek: add sound configuration   Richard Genoud
• [RFC PATCH 07/13] ARM: AT91: DTS: sam9x5ek: enable SSC   Richard Genoud
• [RFC PATCH 08/13] sound: sam9x5_wm8731: machine driver for at91sam9x5 wm8731 boards   Richard Genoud
• [RFC PATCH 09/13] sound: atmel-pcm: don't return ok if pcm-dma is not implemented   Richard Genoud
• [RFC PATCH 10/13] sound: atmel_ssc_dai: PM: actually stopping clock on suspend/resume   Richard Genoud
• [RFC PATCH 11/13] sound: atmel-pcm-dma: check pointer before dereference   Richard Genoud
• [RFC PATCH 12/13] sound: wm8731: rework power management   Richard Genoud
• [RFC PATCH 13/13] sound: codec: wm8371: correct capture line/mic   Richard Genoud
• [RFC PATCH 01/13] misc: atmel_ssc: add device tree DMA support   Richard Genoud
• [RFC PATCH 01/13] misc: atmel_ssc: add device tree DMA support   Richard Genoud
• [RFC PATCH 01/13] misc: atmel_ssc: add device tree DMA support   Richard Genoud
• [RFC PATCH 01/13] misc: atmel_ssc: add device tree DMA support   Richard Genoud
• [RFC PATCH 01/13] misc: atmel_ssc: add device tree DMA support   Richard Genoud
• [RFC PATCH 08/13] sound: sam9x5_wm8731: machine driver for at91sam9x5 wm8731 boards   Richard Genoud
• [RFC PATCH 02/13] misc: atmel_ssc: keep the count of pdev->id   Richard Genoud
• [RFC PATCH 03/13] ARM: at91: DTS: sam9x5: add clock for SSC DT entry   Richard Genoud
• [RFC PATCH 08/13] sound: sam9x5_wm8731: machine driver for at91sam9x5 wm8731 boards   Richard Genoud
• [RFC PATCH 08/13] sound: sam9x5_wm8731: machine driver for at91sam9x5 wm8731 boards   Richard Genoud
• [PATCH v2 0/5] Sound support for at91sam9x5-wm8731 based boards   Richard Genoud
• [PATCH v2 1/5] sound: sam9x5_wm8731: machine driver for at91sam9x5 wm8731 boards   Richard Genoud
• [PATCH v2 2/5] ARM: AT91: DTS: sam9x5: add SSC DMA parameters   Richard Genoud
• [PATCH v2 3/5] ARM: AT91: DTS: sam9x5ek: add WM8731 codec   Richard Genoud
• [PATCH v2 4/5] ARM: AT91: DTS: sam9x5ek: add sound configuration   Richard Genoud
• [PATCH v2 5/5] ARM: AT91: DTS: sam9x5ek: enable SSC   Richard Genoud
• [alsa-devel] [PATCH v2 1/5] sound: sam9x5_wm8731: machine driver for at91sam9x5 wm8731 boards   Richard Genoud
• [PATCH v2 1/5] sound: sam9x5_wm8731: machine driver for at91sam9x5 wm8731 boards   Richard Genoud
• [PATCH v2 2/5] ARM: AT91: DTS: sam9x5: add SSC DMA parameters   Richard Genoud
• [PATCH v2 2/5] ARM: AT91: DTS: sam9x5: add SSC DMA parameters   Richard Genoud
• [PATCH v2 1/5] sound: sam9x5_wm8731: machine driver for at91sam9x5 wm8731 boards   Richard Genoud
• [PATCH v3 0/7] Sound support for at91sam9x5-wm8731 based boards   Richard Genoud
• [PATCH v3 1/7] sound: sam9x5_wm8731: machine driver for at91sam9x5 wm8731 boards   Richard Genoud
• [PATCH v3 2/7] Documentation: DT: add sam9x5ek-wm8731 machine driver   Richard Genoud
• [PATCH v3 3/7] Documentation: DT: update atmel SSC with DMA binding   Richard Genoud
• [PATCH v3 4/7] ARM: AT91: DTS: sam9x5: add SSC DMA parameters   Richard Genoud
• [PATCH v3 5/7] ARM: AT91: DTS: sam9x5ek: add WM8731 codec   Richard Genoud
• [PATCH v3 6/7] ARM: AT91: DTS: sam9x5ek: add sound configuration   Richard Genoud
• [PATCH v3 7/7] ARM: AT91: DTS: sam9x5ek: enable SSC   Richard Genoud
• [PATCH v3 3/7] Documentation: DT: update atmel SSC with DMA binding   Richard Genoud
• [PATCH v3 3/7] Documentation: DT: update atmel SSC with DMA binding   Richard Genoud
• [PATCH v4 0/7] Sound support for at91sam9x5-wm8731 based boards   Richard Genoud
• [PATCH v4 1/7] sound: sam9x5_wm8731: machine driver for at91sam9x5 wm8731 boards   Richard Genoud
• [PATCH v4 2/7] Documentation: DT: add sam9x5ek-wm8731 machine driver   Richard Genoud
• [PATCH v4 3/7] Documentation: DT: update atmel SSC with DMA binding   Richard Genoud
• [PATCH v4 4/7] ARM: AT91: DTS: sam9x5: add SSC DMA parameters   Richard Genoud
• [PATCH v4 5/7] ARM: AT91: DTS: sam9x5ek: add WM8731 codec   Richard Genoud
• [PATCH v4 6/7] ARM: AT91: DTS: sam9x5ek: add sound configuration   Richard Genoud
• [PATCH v4 7/7] ARM: AT91: DTS: sam9x5ek: enable SSC   Richard Genoud
• [PATCH v4 0/7] Sound support for at91sam9x5-wm8731 based boards   Richard Genoud
• [PATCH v4 1/7] sound: sam9x5_wm8731: machine driver for at91sam9x5 wm8731 boards   Richard Genoud
• [PATCH v4 1/7] sound: sam9x5_wm8731: machine driver for at91sam9x5 wm8731 boards   Richard Genoud
• [PATCH v4 2/7] Documentation: DT: add sam9x5ek-wm8731 machine driver   Richard Genoud
• [PATCH v4 3/7] Documentation: DT: update atmel SSC with DMA binding   Richard Genoud
• [PATCH v5 0/7] Sound support for at91sam9x5-wm8731 based boards   Richard Genoud
• [PATCH v5 1/7] sound: codec: wm8731: add rates constraints   Richard Genoud
• [PATCH v5 2/7] sound: sam9x5_wm8731: machine driver for at91sam9x5 wm8731 boards   Richard Genoud
• [PATCH v5 3/7] Documentation: DT: update atmel SSC with DMA binding   Richard Genoud
• [PATCH v5 4/7] ARM: AT91: DTS: sam9x5: add SSC DMA parameters   Richard Genoud
• [PATCH v5 5/7] ARM: AT91: DTS: sam9x5ek: add WM8731 codec   Richard Genoud
• [PATCH v5 6/7] ARM: AT91: DTS: sam9x5ek: enable SSC   Richard Genoud
• [PATCH v5 7/7] ARM: AT91: DTS: sam9x5ek: add sound configuration   Richard Genoud
• [PATCH v5 1/7] sound: codec: wm8731: add rates constraints   Richard Genoud
• [PATCH v5 2/7] sound: sam9x5_wm8731: machine driver for at91sam9x5 wm8731 boards   Richard Genoud
• [PATCH dtc] Makefile: provide separate install targets   David Gibson
• The future of DT binding maintainership   David Gibson
• [PATCH 3/9] clocksource: dw_apb_timer: quirk for variants with 64bit counter   Thomas Gleixner
• [PATCH 5/9] clocksource: dw_apb_timer: quirk for variants without EOI register   Thomas Gleixner
• [PATCH 6/9] clocksource: dw_apb_timer: quirk for inverted int mask   Thomas Gleixner
• [PATCH 9/9] clocksource: dw_apb_timer: special variant for rockchip rk3188 timers   Thomas Gleixner
• [PATCH 9/9] clocksource: dw_apb_timer: special variant for rockchip rk3188 timers   Thomas Gleixner
• [PATCH v5 00/12] MBus DT binding: A new hope   Jason Gunthorpe
• [PATCH v6 00/21] MBus DT binding: PCIe strikes back   Jason Gunthorpe
• [PATCH v6 00/21] MBus DT binding: PCIe strikes back   Jason Gunthorpe
• [PATCH v3 2/5] ARM: dts: imx27: Add imx framebuffer device   Shawn Guo
• [PATCH] ARM: dts: imx27 phyCARD-S remove wrong I2C RTC   Shawn Guo
• [PATCH 0/3] ARM: dts: imx27 phyCARD-S I2C devices   Shawn Guo
• [PATCH 1/2] ARM i.MX53: mba53: Fix PWM backlight DT node   Shawn Guo
• [PATCH v2] regulator: pfuze100: add pfuze100 regulator driver   Shawn Guo
• [PATCH v2] regulator: pfuze100: add pfuze100 regulator driver   Shawn Guo
• [PATCH v8] reset: Add driver for gpio-controlled reset pins   Shawn Guo
• [PATCH v8] reset: Add driver for gpio-controlled reset pins   Shawn Guo
• [PATCH v8] reset: Add driver for gpio-controlled reset pins   Shawn Guo
• [PATCH v8] reset: Add driver for gpio-controlled reset pins   Shawn Guo
• [PATCH] ASoC: imx-sgtl5000: fix error return code in imx_sgtl5000_probe()   Shawn Guo
• [PATCH v8] reset: Add driver for gpio-controlled reset pins   Shawn Guo
• [PATCH v8] reset: Add driver for gpio-controlled reset pins   Shawn Guo
• [PATCH v8] reset: Add driver for gpio-controlled reset pins   Shawn Guo
• [PATCH] reset: allow drivers to request probe deferral   Shawn Guo
• [PATCH v10] reset: Add driver for gpio-controlled reset pins   Shawn Guo
• [PATCH v8] reset: Add driver for gpio-controlled reset pins   Shawn Guo
• [PATCH v2] of: Specify initrd location using 64-bit   Vineet Gupta
• [Patch V2 0/4] rtc: omap: handle rtc wakeup support in driver   Hebbar Gururaja
• [Patch V2 1/4] rtc: omap: restore back (hard-code) wakeup support   Hebbar Gururaja
• [Patch V2 2/4] ARM: Davinci: da8xx/omap-l1: Remove hard coding of rtc device wakeup   Hebbar Gururaja
• [Patch V2 3/4] rtc: omap: add rtc wakeup support to alarm events   Hebbar Gururaja
• [Patch V2 4/4] ARM: dts: AM33XX: update rtc node compatibility   Hebbar Gururaja
• [PATCH 3/3] video: exynos_dp: Use the generic PHY driver   Jingoo Han
• [PATCH V2 1/3] phy: Add driver for Exynos DP PHY   Jingoo Han
• [PATCH V3 0/3] Generic PHY driver for the Exynos SoC DP PHY   Jingoo Han
• [PATCH V3 1/3] ARM: dts: Add DP PHY node to exynos5250.dtsi   Jingoo Han
• [PATCH V3 2/3] phy: Add driver for Exynos DP PHY   Jingoo Han
• [PATCH V3 3/3] video: exynos_dp: Use the generic PHY driver   Jingoo Han
• [PATCH V3 3/3] video: exynos_dp: Use the generic PHY driver   Jingoo Han
• [PATCH V3 2/3] phy: Add driver for Exynos DP PHY   Jingoo Han
• [PATCH V3 3/3] video: exynos_dp: Use the generic PHY driver   Jingoo Han
• [PATCH V4 0/4] Generic PHY driver for the Exynos SoC DP PHY   Jingoo Han
• [PATCH V4 1/4] ARM: dts: Add DP PHY node to exynos5250.dtsi   Jingoo Han
• [PATCH V4 2/4] phy: Add driver for Exynos DP PHY   Jingoo Han
• [PATCH V4 3/4] video: exynos_dp: remove non-DT support for Exynos Display Port   Jingoo Han
• [PATCH V4 4/4] video: exynos_dp: Use the generic PHY driver   Jingoo Han
• [PATCH V4 4/4] video: exynos_dp: Use the generic PHY driver   Jingoo Han
• [PATCH V5 0/4] Generic PHY driver for the Exynos SoC DP PHY   Jingoo Han
• [PATCH V5 1/4] ARM: dts: Add DP PHY node to exynos5250.dtsi   Jingoo Han
• [PATCH V5 2/4] phy: Add driver for Exynos DP PHY   Jingoo Han
• [PATCH V5 3/4] video: exynos_dp: remove non-DT support for Exynos Display Port   Jingoo Han
• [PATCH V5 4/4] video: exynos_dp: Use the generic PHY driver   Jingoo Han
• [PATCH V6 0/4] Generic PHY driver for the Exynos SoC DP PHY   Jingoo Han
• [PATCH V6 1/4] ARM: dts: Add DP PHY node to exynos5250.dtsi   Jingoo Han
• [PATCH V6 2/4] phy: Add driver for Exynos DP PHY   Jingoo Han
• [PATCH V6 3/4] video: exynos_dp: remove non-DT support for Exynos Display Port   Jingoo Han
• [PATCH V6 4/4] video: exynos_dp: Use the generic PHY driver   Jingoo Han
• [PATCH] usb: phy: samsung-usb2: Toggle HSIC GPIO from device tree   Jingoo Han
• [PATCH] usb: phy: samsung-usb2: Toggle HSIC GPIO from device tree   Jingoo Han
• [PATCH V3] pci: exynos: split into two parts such as Synopsys part and Exynos part   Jingoo Han
• [PATCH 3/4] PCI: Add driver for i.MX6 PCI Express   Sascha Hauer
• Best practice device tree design for display subsystems/DRM   Sascha Hauer
• Best practice device tree design for display subsystems/DRM   Sascha Hauer
• Best practice device tree design for display subsystems/DRM   Sascha Hauer
• Best practice device tree design for display subsystems/DRM   Sascha Hauer
• Best practice device tree design for display subsystems/DRM   Sascha Hauer
• Best practice device tree design for display subsystems/DRM   Sascha Hauer
• Best practice device tree design for display subsystems/DRM   Sascha Hauer
• Best practice device tree design for display subsystems/DRM   Sascha Hauer
• Best practice device tree design for display subsystems/DRM   Sascha Hauer
• Best practice device tree design for display subsystems/DRM   Sascha Hauer
• Best practice device tree design for display subsystems/DRM   Sascha Hauer
• Best practice device tree design for display subsystems/DRM   Sascha Hauer
• Best practice device tree design for display subsystems/DRM   Sascha Hauer
• Best practice device tree design for display subsystems/DRM   Sascha Hauer
• [PATCH] of: match the compatible in the order set by the dts file   Sascha Hauer
• [PATCH] of: match the compatible in the order set by the dts file   Sascha Hauer
• [PATCH v1 05/24] clk: wrap I/O access for improved portability   Sascha Hauer
• DT binding review for Armada display subsystem   Sascha Hauer
• [PATCH v1 15/24] serial: mpc512x: OF clock lookup, use the 'mclk' name   Sascha Hauer
• [PATCH v1 05/24] clk: wrap I/O access for improved portability   Sascha Hauer
• [PATCH 01/15] drivers: phy: add generic PHY framework   Sascha Hauer
• [PATCH 2/4] davinci: da8xx/omap-l1: Remove hard coding of rtc device wakeup   Hebbar, Gururaja
• [PATCH 3/4] rtc: omap: add rtc wakeup support to alarm events   Hebbar, Gururaja
• [PATCH 2/4] davinci: da8xx/omap-l1: Remove hard coding of rtc device wakeup   Hebbar, Gururaja
• [PATCH 3/4] rtc: omap: add rtc wakeup support to alarm events   Hebbar, Gururaja
• [PATCH 3/4] rtc: omap: add rtc wakeup support to alarm events   Hebbar, Gururaja
• [PATCH 4/4] ARM: dts: AM33XX: update rtc node compatibility   Hebbar, Gururaja
• [PATCH 4/4] ARM: dts: AM33XX: update rtc node compatibility   Hebbar, Gururaja
• [PATCH 3/4] rtc: omap: add rtc wakeup support to alarm events   Hebbar, Gururaja
• [PATCH 3/4] rtc: omap: add rtc wakeup support to alarm events   Hebbar, Gururaja
• [PATCH v7 11/22] PCI: mvebu: Adapt to the new device tree layout   Bjorn Helgaas
• [PATCH] of: Fix address decoding on Bimini and js2x machines   Benjamin Herrenschmidt
• [PATCH] of: Fix address decoding on Bimini and js2x machines   Benjamin Herrenschmidt
• [PATCH v2] of: Specify initrd location using 64-bit   Rob Herring
• [PATCH] of: Fix address decoding on Bimini and js2x machines   Rob Herring
• [PATCH v3 2/6] misc: sram: add ability to mark sram sections as reserved   Rob Herring
• [PATCH] of: match the compatible in the order set by the dts file   Rob Herring
• [RFC PATCH v4 03/18] Documentation: devicetree: arm: cpus/cpu nodes bindings updates   Rob Herring
• Sharing *.dtsi between Linux architectures?   Rob Herring
• [PATCH] gps6507x.txt: Remove executable bits   Rob Herring
• [RFC PATCH v4 03/18] Documentation: devicetree: arm: cpus/cpu nodes bindings updates   Rob Herring
• [PATCH V2 5/5] ARM: remove #gpio-ranges-cells property   Rob Herring
• [PATCH v4] Input: sysrq - DT binding for key sequence   Rob Herring
• [RFC PATCH v5 1/1] drivers: mfd: vexpress: add Serial Power Controller (SPC) support   Rob Herring
• [PATCH V2 5/5] ARM: remove #gpio-ranges-cells property   Rob Herring
• [PATCH v4] Input: sysrq - DT binding for key sequence   Rob Herring
• [RFC PATCH v4 03/18] Documentation: devicetree: arm: cpus/cpu nodes bindings updates   Rob Herring
• [RFC PATCH v2 01/15] of: add support for retrieving cpu node for a given logical cpu index   Rob Herring
• [RFC PATCH v2 11/15] cpufreq: kirkwood-cpufreq: remove device tree parsing for cpu nodes   Rob Herring
• [PATCH] of/irq: init struct resource to 0 in of_irq_to_resource()   Rob Herring
• [PATCH] of/irq: init struct resource to 0 in of_irq_to_resource()   Rob Herring
• [PATCH] of: provide of_platform_unpopulate()   Rob Herring
• [PATCH 3/3] MAINTAINERS: Refactor device tree maintainership   Rob Herring
• [PATCH] of: match the compatible in the order set by the dts file   Rob Herring
• [PATCH] of: provide of_platform_unpopulate()   Rob Herring
• [PATCH 0/2] ARM: mvebu: fixes for v3.11   Sebastian Hesselbarth
• [PATCH 1/2] ARM: remove dmacap,memset from Device tree binding   Sebastian Hesselbarth
• [PATCH 2/2] ARM: orion5x: add missing mbus include   Sebastian Hesselbarth
• Best practice device tree design for display subsystems/DRM   Sebastian Hesselbarth
• Best practice device tree design for display subsystems/DRM   Sebastian Hesselbarth
• Best practice device tree design for display subsystems/DRM   Sebastian Hesselbarth
• Best practice device tree design for display subsystems/DRM   Sebastian Hesselbarth
• Best practice device tree design for display subsystems/DRM   Sebastian Hesselbarth
• Best practice device tree design for display subsystems/DRM   Sebastian Hesselbarth
• Best practice device tree design for display subsystems/DRM   Sebastian Hesselbarth
• Best practice device tree design for display subsystems/DRM   Sebastian Hesselbarth
• Best practice device tree design for display subsystems/DRM   Sebastian Hesselbarth
• Best practice device tree design for display subsystems/DRM   Sebastian Hesselbarth
• Best practice device tree design for display subsystems/DRM   Sebastian Hesselbarth
• Best practice device tree design for display subsystems/DRM   Sebastian Hesselbarth
• Best practice device tree design for display subsystems/DRM   Sebastian Hesselbarth
• Best practice device tree design for display subsystems/DRM   Sebastian Hesselbarth
• Best practice device tree design for display subsystems/DRM   Sebastian Hesselbarth
• Best practice device tree design for display subsystems/DRM   Sebastian Hesselbarth
• DT binding review for Armada display subsystem   Sebastian Hesselbarth
• DT binding review for Armada display subsystem   Sebastian Hesselbarth
• [PATCH 00/10] Orion Watchdog fixes   Sebastian Hesselbarth
• [RFC] Driver configuration using Device Tree   Eric Holmberg
• [PATCH v3 4/7] ARM: shmobile: r8a7740: add MMCIF DMA definitions   Simon Horman
• [PATCH v3 1/5] phy: Add driver for Exynos MIPI CSIS/DSIM DPHYs   Kishon Vijay Abraham I
• [PATCH V3 3/3] video: exynos_dp: Use the generic PHY driver   Kishon Vijay Abraham I
• [PATCH v9 0/8] Generic PHY Framework   Kishon Vijay Abraham I
• [PATCH v9 0/8] Generic PHY Framework   Kishon Vijay Abraham I
• [PATCH v9 0/8] Generic PHY Framework   Kishon Vijay Abraham I
• [PATCH v9 0/8] Generic PHY Framework   Kishon Vijay Abraham I
• [PATCH v6] usb: dwc3: use extcon fwrk to receive connect/disconnect   Kishon Vijay Abraham I
• [PATCH v9 1/8] drivers: phy: add generic PHY framework   Kishon Vijay Abraham I
• [PATCH v9 1/8] drivers: phy: add generic PHY framework   Kishon Vijay Abraham I
• [PATCH v9 1/8] drivers: phy: add generic PHY framework   Kishon Vijay Abraham I
• [PATCH 00/15] PHY framework   Kishon Vijay Abraham I
• [PATCH 01/15] drivers: phy: add generic PHY framework   Kishon Vijay Abraham I
• [PATCH 02/15] usb: phy: omap-usb2: use the new generic PHY framework   Kishon Vijay Abraham I
• [PATCH 03/15] usb: phy: twl4030: use the new generic PHY framework   Kishon Vijay Abraham I
• [PATCH 04/15] ARM: OMAP: USB: Add phy binding information   Kishon Vijay Abraham I
• [PATCH 05/15] ARM: dts: omap: update usb_otg_hs data   Kishon Vijay Abraham I
• [PATCH 06/15] usb: musb: omap2430: use the new generic PHY framework   Kishon Vijay Abraham I
• [PATCH 07/15] usb: phy: omap-usb2: remove *set_suspend* callback from omap-usb2   Kishon Vijay Abraham I
• [PATCH 08/15] usb: phy: twl4030-usb: remove *set_suspend* and *phy_init* ops   Kishon Vijay Abraham I
• [PATCH 09/15] phy: Add driver for Exynos MIPI CSIS/DSIM DPHYs   Kishon Vijay Abraham I
• [PATCH 10/15] video: exynos_mipi_dsim: Use the generic PHY driver   Kishon Vijay Abraham I
• [PATCH 11/15] exynos4-is: Use the generic MIPI CSIS PHY driver   Kishon Vijay Abraham I
• [PATCH 12/15] ARM: Samsung: Remove the MIPI PHY setup code   Kishon Vijay Abraham I
• [PATCH 13/15] phy: Add driver for Exynos DP PHY   Kishon Vijay Abraham I
• [PATCH 14/15] video: exynos_dp: remove non-DT support for Exynos Display Port   Kishon Vijay Abraham I
• [PATCH 15/15] video: exynos_dp: Use the generic PHY driver   Kishon Vijay Abraham I
• [PATCH 01/15] drivers: phy: add generic PHY framework   Kishon Vijay Abraham I
• [PATCH 02/15] usb: phy: omap-usb2: use the new generic PHY framework   Kishon Vijay Abraham I
• [PATCH 01/15] drivers: phy: add generic PHY framework   Kishon Vijay Abraham I
• [PATCH 01/15] drivers: phy: add generic PHY framework   Kishon Vijay Abraham I
• [PATCH 01/15] drivers: phy: add generic PHY framework   Kishon Vijay Abraham I
• [PATCH 01/15] drivers: phy: add generic PHY framework   Kishon Vijay Abraham I
• [PATCH 01/15] drivers: phy: add generic PHY framework   Kishon Vijay Abraham I
• [PATCH 01/15] drivers: phy: add generic PHY framework   Kishon Vijay Abraham I
• [PATCH] watchdog: dw: Enable OF support for DW watchdog timer.   Jamie Iles
• [PATCH] tty: serial: Add initial MSM UART High Speed Lite driver   Ivan T. Ivanov
• [PATCH] tty: serial: Add initial MSM UART High Speed Lite driver   Ivan T. Ivanov
• [PATCH] tty: serial: Add initial MSM UART High Speed Lite driver   Ivan T. Ivanov
• [PATCH] msm_serial: add missing iounmap() on error in msm_request_port()   Ivan T. Ivanov
• [PATCH v3 1/4] ARM: mach-moxart: add MOXA ART SoC files   Jonas Jensen
• [PATCH v3 2/4] ARM: mach-moxart: add MOXA ART device tree files   Jonas Jensen
• [PATCH v3 3/4] ARM: mach-moxart: add MOXA ART UART debug files   Jonas Jensen
• [PATCH v3 4/4] ARM: reinsert ARCH_MULTI_V4 Kconfig option   Jonas Jensen
• [PATCH v3 4/4] ARM: reinsert ARCH_MULTI_V4 Kconfig option   Jonas Jensen
• [PATCH v3 2/4] ARM: mach-moxart: add MOXA ART device tree files   Jonas Jensen
• [PATCH] Documentation: Add device tree binding file for MOXA ART SoCs interrupt controller   Jonas Jensen
• [PATCH] net: Add MOXA ART SoCs ethernet driver   Jonas Jensen
• [PATCH] net: Add MOXA ART SoCs ethernet driver   Jonas Jensen
• [PATCH V3 1/3] dts: change Marvell prefix to 'marvell'   Olof Johansson
• [PATCH v8] reset: Add driver for gpio-controlled reset pins   Olof Johansson
• [PATCH 3/3] MAINTAINERS: Refactor device tree maintainership   Olof Johansson
• [PATCH 1/4] MFD: Add TPS659038 documentation under Palmas   Lee Jones
• [PATCH 1/4] MFD: Add TPS659038 documentation under Palmas   Lee Jones
• [PATCH v3 1/4] MFD: Palmas: Check if irq is valid   Lee Jones
• [PATCH v3 1/4] MFD: Palmas: Check if irq is valid   Lee Jones
• 回复: About omap2 mmc host close too long irq in irqaction.   Balaji T K
• [PATCH RFC 0/3] extend stmmac DT support.   Srinivas KANDAGATLA
• [PATCH RFC 1/3] dt:net:stmmac: Allocate platform data only if its NULL.   Srinivas KANDAGATLA
• [PATCH RFC 2/3] dt:net:stmmac: Add support to dwmac version 3.610 and 3.710   Srinivas KANDAGATLA
• [PATCH RFC 3/3] dt:net:stmmac: Add dt specific phy reset callback support.   Srinivas KANDAGATLA
• [PATCH RFC 2/3] dt:net:stmmac: Add support to dwmac version 3.610 and 3.710   Srinivas KANDAGATLA
• [PATCH v1 0/3] extend stmmac DT support.   Srinivas KANDAGATLA
• [PATCH v1 1/3] dt:net:stmmac: Allocate platform data only if its NULL.   Srinivas KANDAGATLA
• [PATCH v1 2/3] dt:net:stmmac: Add support to dwmac version 3.610 and 3.710   Srinivas KANDAGATLA
• [PATCH v1 3/3] dt:net:stmmac: Add dt specific phy reset callback support.   Srinivas KANDAGATLA
• [PATCH v1 0/3] extend stmmac DT support.   Srinivas KANDAGATLA
• [PATCH v2 0/3] extend stmmac DT support   Srinivas KANDAGATLA
• [PATCH v2 1/3] dt:net:stmmac: Allocate platform data only if its NULL.   Srinivas KANDAGATLA
• [PATCH v2 2/3] dt:net:stmmac: Add support to dwmac version 3.610 and 3.710   Srinivas KANDAGATLA
• [PATCH v2 3/3] dt:net:stmmac: Add dt specific phy reset callback support.   Srinivas KANDAGATLA
• [PATCH v6] serial:st-asc: Add ST ASC driver.   Srinivas KANDAGATLA
• [PATCH RFC] trafgen: xilinx: add axi traffic generator driver   Greg KH
• [Ksummit-2013-discuss] [ATTEND] Handling of devicetree bindings   Greg KH
• [Ksummit-2013-discuss] [ATTEND] Handling of devicetree bindings   Greg KH
• [PATCH v9 1/8] drivers: phy: add generic PHY framework   Greg KH
• [PATCH v9 1/8] drivers: phy: add generic PHY framework   Greg KH
• [PATCH v9 1/8] drivers: phy: add generic PHY framework   Greg KH
• [PATCH 01/15] drivers: phy: add generic PHY framework   Greg KH
• [PATCH 02/15] usb: phy: omap-usb2: use the new generic PHY framework   Greg KH
• [PATCH 01/15] drivers: phy: add generic PHY framework   Greg KH
• [PATCH 01/15] drivers: phy: add generic PHY framework   Greg KH
• [PATCH 01/15] drivers: phy: add generic PHY framework   Greg KH
• [PATCH 01/15] drivers: phy: add generic PHY framework   Greg KH
• [PATCH 01/15] drivers: phy: add generic PHY framework   Greg KH
• [PATCH 01/15] drivers: phy: add generic PHY framework   Greg KH
• [PATCH 01/15] drivers: phy: add generic PHY framework   Greg KH
• [PATCH 01/15] drivers: phy: add generic PHY framework   Greg KH
• [PATCH 1/1] of/documentation: Fix a typo in exynos5250-clock.txt   Sachin Kamat
• [PATCH 1/3] clk: exynos5250: Add G2D gate clock   Sachin Kamat
• [PATCH 2/3] of/documentation: Update G2D documentation   Sachin Kamat
• [PATCH 3/3] ARM: EXYNOS: Add G2D support to exynos5250   Sachin Kamat
• [PATCH 2/3] of/documentation: Update G2D documentation   Sachin Kamat
• [PATCH v2 3/3] of/documentation: Update G2D documentation   Sachin Kamat
• [PATCH v2 Resend 2/3] of/documentation: Update G2D documentation   Sachin Kamat
• [PATCH v2 3/3] of/documentation: Update G2D documentation   Sachin Kamat
• [RFC PATCH v2 01/15] of: add support for retrieving cpu node for a given logical cpu index   Sudeep KarkadaNagesha
• [RFC PATCH v2 11/15] cpufreq: kirkwood-cpufreq: remove device tree parsing for cpu nodes   Sudeep KarkadaNagesha
• [RFC PATCH v2 11/15] cpufreq: kirkwood-cpufreq: remove device tree parsing for cpu nodes   Sudeep KarkadaNagesha
• [PATCH dtc] Makefile: provide separate install targets   Jeremy Kerr
• Best practice device tree design for display subsystems/DRM   Russell King
• Best practice device tree design for display subsystems/DRM   Russell King
• Best practice device tree design for display subsystems/DRM   Russell King
• Best practice device tree design for display subsystems/DRM   Russell King
• Best practice device tree design for display subsystems/DRM   Russell King
• Best practice device tree design for display subsystems/DRM   Russell King
• Best practice device tree design for display subsystems/DRM   Russell King
• Best practice device tree design for display subsystems/DRM   Russell King
• Best practice device tree design for display subsystems/DRM   Russell King
• Best practice device tree design for display subsystems/DRM   Russell King
• Best practice device tree design for display subsystems/DRM   Russell King
• Best practice device tree design for display subsystems/DRM   Russell King
• Best practice device tree design for display subsystems/DRM   Russell King
• [PATCH v2 16/24] net: can: mscan: make mpc512x code use common clock   Marc Kleine-Budde
• [PATCH v2 16/24] net: can: mscan: make mpc512x code use common clock   Marc Kleine-Budde
• [PATCHv2] am33xx: cpsw: default to ethernet hwaddr from efuse if not defined in dt   Peter Korsgaard
• [PATCH 1/3] dmaengine: add dma_get_slave_sg_limits()   Vinod Koul
• [RFC PATCH v2 11/15] cpufreq: kirkwood-cpufreq: remove device tree parsing for cpu nodes   Viresh Kumar
• [RFC PATCH v2 00/15] DT/core: update cpu device of_node   Viresh Kumar
• [PATCH v7 7/9] ARM: dts: Add description of System MMU of Exynos SoCs   Cho KyongHo
• [PATCH v7 8/9] iommu/exynos: support for device tree   Cho KyongHo
• [PATCH -next] net: ethernet: davinci_emac: remove redundant dev_err call in davinci_emac_probe()   Prabhakar Lad
• [PATCH RFC v3] media: OF: add video sync endpoint property   Prabhakar Lad
• [PATCH v2 2/2] media: i2c: tvp7002: add OF support   Prabhakar Lad
• [PATCH v3 0/6] ARM: davinci: da850: add ethernet driver DT support   Prabhakar Lad
• [PATCH RFC v3] media: OF: add video sync endpoint property   Prabhakar Lad
• [PATCH v2 2/2] media: i2c: tvp7002: add OF support   Prabhakar Lad
• [PATCH v2] media: i2c: adv7343: add OF support   Prabhakar Lad
• [PATCH v2] media: i2c: adv7343: add OF support   Prabhakar Lad
• [PATCH v2 2/2] media: i2c: tvp7002: add OF support   Prabhakar Lad
• [PATCH RFC v4] media: OF: add "sync-on-green-active" property   Prabhakar Lad
• [PATCH RFC v4] media: OF: add "sync-on-green-active" property   Prabhakar Lad
• [PATCH RFC FINAL v5] media: OF: add "sync-on-green-active" property   Prabhakar Lad
• [PATCH v3] media: i2c: tvp7002: add OF support   Prabhakar Lad
• [PATCH RFC FINAL v5] media: OF: add "sync-on-green-active" property   Prabhakar Lad
• [PATCH v3] media: i2c: tvp7002: add OF support   Prabhakar Lad
• [PATCH v4] media: i2c: tvp7002: add OF support   Lad, Prabhakar
• [PATCH v3 0/2] adv7343 add OF support   Lad, Prabhakar
• [PATCH v3 1/2] media: i2c: adv7343: make the platform data members as array   Lad, Prabhakar
• [PATCH v3 2/2] media: i2c: adv7343: add OF support   Lad, Prabhakar
• [PATCH v3 5/7] ARM: shmobile: r8a7740: add DT nodes for three DMAC instance   Guennadi Liakhovetski
• [PATCH/RFC 2/3] ethernet: add a PHY reset GPIO DT binding to sh_eth   Guennadi Liakhovetski
• [PATCH] of: Fix address decoding on Bimini and js2x machines   Grant Likely
• [PATCH] of: Fix address decoding on Bimini and js2x machines   Grant Likely
• [GIT PULL] devicetree for v3.11   Grant Likely
• Best practice device tree design for display subsystems/DRM   Grant Likely
• Best practice device tree design for display subsystems/DRM   Grant Likely
• Best practice device tree design for display subsystems/DRM   Grant Likely
• Best practice device tree design for display subsystems/DRM   Grant Likely
• Best practice device tree design for display subsystems/DRM   Grant Likely
• [PATCH 2/2] Input: Adding DT support for keyreset tuneables   Grant Likely
• [PATCH 2/2] Input: Adding DT support for keyreset tuneables   Grant Likely
• [PATCH v3 2/2] drivers: dma-contiguous: add initialization from device tree   Grant Likely
• [PATCH] MAINTAINERS: Remove Grant Likely   Grant Likely
• Fixed PHY Device Tree usage?   Grant Likely
• [PATCH v8] reset: Add driver for gpio-controlled reset pins   Grant Likely
• [PATCH v8] reset: Add driver for gpio-controlled reset pins   Grant Likely
• New device tree mailing list   Grant Likely
• [PATCH 2/3] MAINTAINERS: Change device tree mailing list   Grant Likely
• [PATCH 3/3] MAINTAINERS: Refactor device tree maintainership   Grant Likely
• The future of DT binding maintainership   Grant Likely
• Reusing DTSI files across trees with differing numbers of address-cells   Grant Likely
• [PATCH] of: add vendor prefix for Qualcomm Atheros, Inc.   Grant Likely
• [PATCH 0/2] PM / OPP: updates to enable sharing OPPs info   Grant Likely
• [PATCH] DT: add vendor prefixes for hisilicon   Grant Likely
• [PATCH v2] OF: make of_property_for_each_{u32|string}() use parameters if OF is not enabled   Grant Likely
• [PATCH v2] of: Add more stubs for non-OF builds   Grant Likely
• [PATCH] of/irq: Avoid calling list_first_entry() for empty list   Grant Likely
• [PATCH v2] of: Specify initrd location using 64-bit   Grant Likely
• [PATCH] of/platform: Staticize of_platform_device_create_pdata()   Grant Likely
• [PATCH] of: match the compatible in the order set by the dts file   Grant Likely
• [Ksummit-2013-discuss] [ATTEND] Handling of devicetree bindings   Grant Likely
• [Ksummit-2013-discuss] [ATTEND] Handling of devicetree bindings   Grant Likely
• [PATCH] of/irq: init struct resource to 0 in of_irq_to_resource()   Grant Likely
• [RFC] Driver configuration using Device Tree   Grant Likely
• New device tree mailing list   Grant Likely
• [PATCH 3/3] MAINTAINERS: Refactor device tree maintainership   Grant Likely
• [PATCH] of: match the compatible in the order set by the dts file   Grant Likely
• [PATCH] of: provide of_platform_unpopulate()   Grant Likely
• [PATCH 3/3] MAINTAINERS: Refactor device tree maintainership   Grant Likely
• [PATCH 3/3] MAINTAINERS: Refactor device tree maintainership   Grant Likely
• [PATCH 3/3] MAINTAINERS: Refactor device tree maintainership   Grant Likely
• Request for linux-gpio list creation   Grant Likely
• [PATCH] leds: Add device tree binding for pca9633   Tony Lindgren
• [PATCH v2 4/9] wl12xx: use frequency instead of enumerations for pdata clocks   Tony Lindgren
• [PATCH v2 1/2] ARM: configs: Enable TI_EDMA in omap2plus_defconfig   Tony Lindgren
• [PATCH v2 4/4] ARM: OMAP2+: Provide alias to USB PHY clock   Tony Lindgren
• [PATCH v2 4/4] ARM: OMAP2+: Provide alias to USB PHY clock   Tony Lindgren
• [PATCH 3/3] ARM: dts: omap4-sdp: add dynamic pin states for uart3/4   Tony Lindgren
• [PATCH 2/3] ARM: OMAP2+: omap_device: add pinctrl handling   Tony Lindgren
• [PATCH 1/3] pinctrl: rollback check for !dev->pins in pinctrl_pm_select*() APIs   Tony Lindgren
• [PATCH 04/15] ARM: OMAP: USB: Add phy binding information   Tony Lindgren
• [PATCH 05/15] ARM: dts: omap: update usb_otg_hs data   Tony Lindgren
• [PATCH 3/3] ARM: dts: omap4-sdp: add dynamic pin states for uart3/4   Tony Lindgren
• [PATCH 2/3] ARM: OMAP2+: omap_device: add pinctrl handling   Tony Lindgren
• [PATCH 3/3] ARM: dts: omap4-sdp: add dynamic pin states for uart3/4   Tony Lindgren
• [PATCH 1/3] misc: Add crossbar driver   Tony Lindgren
• [PATCH V3] of: Set the DMA mask to 64 bits when dma_addr_t is 64-bits   Russell King - ARM Linux
• [PATCH V3] of: Set the DMA mask to 64 bits when dma_addr_t is 64-bits   Russell King - ARM Linux
• [PATCH V3] of: Set the DMA mask to 64 bits when dma_addr_t is 64-bits   Russell King - ARM Linux
• [PATCH V3] of: Set the DMA mask to 64 bits when dma_addr_t is 64-bits   Russell King - ARM Linux
• Sharing *.dtsi between Linux architectures?   Russell King - ARM Linux
• DT binding review for Armada display subsystem   Russell King - ARM Linux
• DT binding review for Armada display subsystem   Russell King - ARM Linux
• DT binding review for Armada display subsystem   Russell King - ARM Linux
• DT binding review for Armada display subsystem   Russell King - ARM Linux
• DT binding review for Armada display subsystem   Russell King - ARM Linux
• [RFC PATCH v5 0/1] drivers: mfd: Versatile Express SPC support   Russell King - ARM Linux
• [PATCH v1 05/24] clk: wrap I/O access for improved portability   Russell King - ARM Linux
• [PATCH 1/3] dmaengine: add dma_get_slave_sg_limits()   Russell King - ARM Linux
• [PATCH v2 18/24] i2c: mpc: OF clock lookup for MPC512x   Russell King - ARM Linux
• [PATCH 3/3] MAINTAINERS: Refactor device tree maintainership   Jon Loeliger
• [PATCH 00/10] Orion Watchdog fixes   Andrew Lunn
• [PATCH 00/10] Orion Watchdog fixes   Andrew Lunn
• [PATCH 05/10] watchdog: orion: Add a memory resource for RSTOUT register   Andrew Lunn
• [PATCH -next] mtd: orion_nand: convert to use devm_* APIs   Andrew Lunn
• [RFC PATCH v2 11/15] cpufreq: kirkwood-cpufreq: remove device tree parsing for cpu nodes   Andrew Lunn
• [RESEND PATCH v7 00/22] MBus DT binding: The return of PCIe   Andrew Lunn
• [RESEND PATCH v7 00/22] MBus DT binding: The return of PCIe   Andrew Lunn
• [RESEND PATCH v7 00/22] MBus DT binding: The return of PCIe   Andrew Lunn
• Appended DTB files for multi-machine kernels   Daniel Mack
• Appended DTB files for multi-machine kernels   Daniel Mack
• Appended DTB files for multi-machine kernels   Daniel Mack
• [PATCH 0/5 v7][RFC] ASoC: simple-card DT support   Daniel Mack
• Best practice device tree design for display subsystems/DRM   Stéphane Marchesin
• [RFC PATCH v4 03/18] Documentation: devicetree: arm: cpus/cpu nodes bindings updates   Dave Martin
• [PATCH v2 4/9] wl12xx: use frequency instead of enumerations for pdata clocks   Nishanth Menon
• [RFC PATCH V2 1/8] regulator: Introduce OMAP regulator to control PMIC over VC/VP   Nishanth Menon
• [RFC PATCH V2 1/8] regulator: Introduce OMAP regulator to control PMIC over VC/VP   Nishanth Menon
• [RFC PATCH V2 1/8] regulator: Introduce OMAP regulator to control PMIC over VC/VP   Nishanth Menon
• [RFC PATCH V2 1/8] regulator: Introduce OMAP regulator to control PMIC over VC/VP   Nishanth Menon
• [RFC PATCH V2 1/8] regulator: Introduce OMAP regulator to control PMIC over VC/VP   Nishanth Menon
• [PATCH 0/2] regulator: palmas-pmic: doc: update device tree bindings   Nishanth Menon
• [PATCH 1/2] regulator: palmas-pmic: doc: fix typo for sleep-mode   Nishanth Menon
• [PATCH 2/2] regulator: palmas-pmic: doc: remove ti,tstep   Nishanth Menon
• [PATCH 0/2] regulator: palmas-pmic: doc: update device tree bindings   Nishanth Menon
• [PATCH V2 0/2] regulator: palmas-pmic: doc: update device tree bindings   Nishanth Menon
• [PATCH V2 1/2] regulator: palmas-pmic: doc: fix typo for sleep-mode   Nishanth Menon
• [PATCH V2 2/2] regulator: palmas-pmic: doc: remove ti,tstep   Nishanth Menon
• [PATCH 0/9] ARM: dts: omap5-uevm: fixup wrong regulator configuration   Nishanth Menon
• [PATCH 1/9] ARM: dts: omap5-uevm: document regulator signals used on the actual board   Nishanth Menon
• [PATCH 2/9] ARM: dts: omap5-uevm: update SMPS9 settings   Nishanth Menon
• [PATCH 3/9] ARM: dts: omap5-uevm: update and disable unused regulators LDO[28]   Nishanth Menon
• [PATCH 4/9] ARM: dts: omap5-uevm: update LDO1 voltage to 1.5V and settings   Nishanth Menon
• [PATCH 5/9] ARM: dts: omap5-uevm: update LDO3 voltage to 1.5V and settings   Nishanth Menon
• [PATCH 6/9] ARM: dts: omap5-uevm: update LDO4 voltage to 1.5V and settings   Nishanth Menon
• [PATCH 7/9] ARM: dts: omap5-uevm: update LDO6 voltage to 1.2V   Nishanth Menon
• [PATCH 8/9] ARM: dts: omap5-uevm: update LDO7 voltage to 2V and settings   Nishanth Menon
• [PATCH 9/9] ARM: dts: omap5-uevm: update SDCARD LDO9 and resource REGEN3   Nishanth Menon
• [PATCH 1/3] misc: Add crossbar driver   Nishanth Menon
• [PATCH 2/3] ARM: dts: DRA: Add crossbar device binding   Nishanth Menon
• [PATCH 1/3] misc: Add crossbar driver   Nishanth Menon
• [PATCH] arm: dts: twl6030: typical connection to omap4 as a separate dtsi file   Nishanth Menon
• [PATCH 0/4] dra7: I2C/MCSPI/UART pin control datas   Nishanth Menon
• [PATCH -next] net: ethernet: davinci_emac: remove redundant dev_err call in davinci_emac_probe()   David Miller
• [PATCH v1 0/3] extend stmmac DT support.   David Miller
• [PATCH v2 0/3] extend stmmac DT support   David Miller
• [RFC PATCH v5 0/1] drivers: mfd: Versatile Express SPC support   Pawel Moll
• [RFC PATCH v5 0/1] drivers: mfd: Versatile Express SPC support   Pawel Moll
• [RFC PATCH v5 0/1] drivers: mfd: Versatile Express SPC support   Pawel Moll
• [PATCH 0/5 v7][RFC] ASoC: simple-card DT support   Kuninori Morimoto
• [PATCH -next] net: ethernet: davinci_emac: remove redundant dev_err call in davinci_emac_probe()   Mugunthan V N
• [PATCH v4 0/4] mtd:nand:omap2: clean-up of supported ECC schemes   Mugunthan V N
• [PATCH RFC v3] media: OF: add video sync endpoint property   Sylwester Nawrocki
• [PATCH v2 2/2] media: i2c: tvp7002: add OF support   Sylwester Nawrocki
• [PATCH v3 00/13] ARM: dts: Add camera and magnetometer support for TRATS(2) board   Sylwester Nawrocki
• [PATCH v3 01/13] ARM: dts: Correct camera pinctrl nodes for Exynos4x12 SoCs   Sylwester Nawrocki
• [PATCH v3 02/13] ARM: dts: Add pinctrl entries for Exynos4x12 FIMC-IS peripherals   Sylwester Nawrocki
• [PATCH v3 03/13] ARM: dts: Add ISP power domain node for Exynos4x12   Sylwester Nawrocki
• [PATCH v3 04/13] ARM: dts: Use generic DMA bindings for Exynos4 SPI devices   Sylwester Nawrocki
• [PATCH v3 05/13] ARM: dts: Add camera subsystem device nodes to exynos4.dtsi   Sylwester Nawrocki
• [PATCH v3 06/13] ARM: dts: Add camera subsystem nodes to exynos4x12.dtsi   Sylwester Nawrocki
• [PATCH v3 07/13] ARM: dts: Add AK8975 device node for Exynos4412 TRATS2 board   Sylwester Nawrocki
• [PATCH v3 08/13] ARM: dts: Add camera device nodes for Exynos4412 TRATS2 board   Sylwester Nawrocki
• [PATCH v3 09/13] ARM: dts: Add camera device nodes for Exynos4210 SoCs   Sylwester Nawrocki
• [PATCH v3 10/13] ARM: dts: Add FIMC nodes for Exynos4210 Trats board   Sylwester Nawrocki
• [PATCH v3 11/13] ARM: dts: Add Exynos4210 SoC camera port pinctrl nodes   Sylwester Nawrocki
• [PATCH v3 12/13] ARM: dts: Add S5K5BA sensor regulator definitions for Trats board   Sylwester Nawrocki
• [PATCH v3 13/13] ARM: dts: Add MIPI PHY node to exynos4.dtsi   Sylwester Nawrocki
• [PATCH V3 3/3] video: exynos_dp: Use the generic PHY driver   Sylwester Nawrocki
• [PATCH V3 2/3] phy: Add driver for Exynos DP PHY   Sylwester Nawrocki
• [PATCH v3 07/13] ARM: dts: Add AK8975 device node for Exynos4412 TRATS2 board   Sylwester Nawrocki
• [PATCH v3 08/13] ARM: dts: Add camera device nodes for Exynos4412 TRATS2 board   Sylwester Nawrocki
• [PATCH v3 12/13] ARM: dts: Add S5K5BA sensor regulator definitions for Trats board   Sylwester Nawrocki
• [PATCH V6 0/4] Generic PHY driver for the Exynos SoC DP PHY   Sylwester Nawrocki
• [PATCH RFC v3] media: OF: add video sync endpoint property   Sylwester Nawrocki
• [PATCH v2 2/2] media: i2c: tvp7002: add OF support   Sylwester Nawrocki
• DT binding review for Armada display subsystem   Sylwester Nawrocki
• DT binding review for Armada display subsystem   Sylwester Nawrocki
• DT binding review for Armada display subsystem   Sylwester Nawrocki
• [PATCH RFC v3] media: OF: add video sync endpoint property   Sylwester Nawrocki
• [PATCH v2 2/2] media: i2c: tvp7002: add OF support   Sylwester Nawrocki
• [PATCH v2] media: i2c: adv7343: add OF support   Sylwester Nawrocki
• [PATCH RFC v4] media: OF: add "sync-on-green-active" property   Sylwester Nawrocki
• [PATCH RFC FINAL v5] media: OF: add "sync-on-green-active" property   Sylwester Nawrocki
• [PATCH v3] media: i2c: tvp7002: add OF support   Sylwester Nawrocki
• [PATCH 01/15] drivers: phy: add generic PHY framework   Sylwester Nawrocki
• [PATCH] watchdog: dw: Enable OF support for DW watchdog timer.   Dinh Nguyen
• [PATCH 2/4] davinci: da8xx/omap-l1: Remove hard coding of rtc device wakeup   Sekhar Nori
• [PATCH 3/4] rtc: omap: add rtc wakeup support to alarm events   Sekhar Nori
• [PATCH 3/4] rtc: omap: add rtc wakeup support to alarm events   Sekhar Nori
• [PATCH 4/4] ARM: dts: AM33XX: update rtc node compatibility   Sekhar Nori
• [PATCH 3/4] rtc: omap: add rtc wakeup support to alarm events   Sekhar Nori
• [PATCH 4/4] ARM: dts: AM33XX: update rtc node compatibility   Sekhar Nori
• [PATCH v3 2/8] wlcore: set irq_flags in the board files instead of hiding behind a quirk   Sekhar Nori
• [PATCH v3 0/6] ARM: davinci: da850: add ethernet driver DT support   Sekhar Nori
• [PATCH -next] ARM: edma: remove duplicated include from edma.c   Sekhar Nori
• [PATCH v3 1/5] ARM: davinci: uart: move to devid based clk_get   Sekhar Nori
• [PATCH v3 2/5] ARM: davinci: da850: override device name of UART in DT kernel   Sekhar Nori
• [RFC PATCH v5 0/1] drivers: mfd: Versatile Express SPC support   Samuel Ortiz
• [RFC PATCH v5 0/1] drivers: mfd: Versatile Express SPC support   Samuel Ortiz
• [RFC PATCH v5 0/1] drivers: mfd: Versatile Express SPC support   Samuel Ortiz
• [RFC PATCH v5 0/1] drivers: mfd: Versatile Express SPC support   Samuel Ortiz
• [PATCH v6] video: imxfb: Add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] arm: atmel: at91sam9n12: add qt1070 support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] arm: atmel: at91sam9n12: add pinctrl of TWI   Jean-Christophe PLAGNIOL-VILLARD
• Sharing *.dtsi between Linux architectures?   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/6] mtd: ofpart: add compatible check for child nodes   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH RESEND 1/2] ARM: mmp: Add compatible entries for OLPC XO laptops   Jean-Christophe PLAGNIOL-VILLARD
• Reference voltages for ADC channels   Hector Palacios
• Reference voltages for ADC channels   Hector Palacios
• [PATCH v2 0/5] iio: mxs-lradc: add support to optional divider_by_two   Hector Palacios
• [PATCH v2 1/5] iio: mxs-lradc: change the realbits to 12   Hector Palacios
• [PATCH v2 2/5] ARM: dts: add reference voltage property for MXS LRADC   Hector Palacios
• [PATCH v2 3/5] iio: mxs-lradc: add scale attribute to channels   Hector Palacios
• [PATCH v2 4/5] iio: mxs-lradc: add scale_available file to channels   Hector Palacios
• [PATCH v2 5/5] iio: mxs-lradc: add write_raw function to modify scale   Hector Palacios
• [PATCH v2 5/5] iio: mxs-lradc: add write_raw function to modify scale   Hector Palacios
• [PATCH v2 3/5] iio: mxs-lradc: add scale attribute to channels   Hector Palacios
• [PATCH v2 5/5] iio: mxs-lradc: add write_raw function to modify scale   Hector Palacios
• [PATCH] ARM: dts: imx27 phyCARD-S remove wrong I2C RTC   Markus Pargmann
• [PATCH v9 01/10] ASoC: imx-pcm-dma: DT support   Markus Pargmann
• [PATCH v9 04/10] ASoC: fsl-ssi: Add support for imx-pcm-fiq   Markus Pargmann
• [PATCH v9 08/10] ASoC: Add phycore-ac97-dt driver   Markus Pargmann
• [PATCH] ARM: dts: imx27 phyCARD-S remove wrong I2C RTC   Markus Pargmann
• [PATCH] ARM: dts: imx27 phyCARD-S remove wrong I2C RTC   Markus Pargmann
• [PATCH 0/3] ARM: dts: imx27 phyCARD-S I2C devices   Markus Pargmann
• [PATCH 1/3] ARM: dts: imx27 phyCARD-S SOM remove wrong i2c sensor   Markus Pargmann
• [PATCH 2/3] ARM: dts: imx27 phyCARD-S, move i2c1 and owire to rdk   Markus Pargmann
• [PATCH 3/3] ARM: dts: imx27 phyCARD-S, i2c ADC device node   Markus Pargmann
• [alsa-devel] [PATCH v9 08/10] ASoC: Add phycore-ac97-dt driver   Markus Pargmann
• [PATCH] gps6507x.txt: Remove executable bits   Joe Perches
• [PATCH 1/3] misc: Add crossbar driver   Joe Perches
• New device tree mailing list   Joe Perches
• [PATCH 3/3] MAINTAINERS: Refactor device tree maintainership   Joe Perches
• [PATCH v6 00/21] MBus DT binding: PCIe strikes back   Thomas Petazzoni
• [PATCH v6 00/21] MBus DT binding: PCIe strikes back   Thomas Petazzoni
• [PATCH V3 2/3] clocksource: mmp: support CLOCKSOURCE OF DECLARE   Thomas Petazzoni
• Fixed PHY Device Tree usage?   Thomas Petazzoni
• Fixed PHY Device Tree usage?   Thomas Petazzoni
• Fixed PHY Device Tree usage?   Thomas Petazzoni
• Fixed PHY Device Tree usage?   Thomas Petazzoni
• Fixed PHY Device Tree usage?   Thomas Petazzoni
• [RFC PATCH 0/3] Add DT support for fixed PHYs   Thomas Petazzoni
• [RFC PATCH 1/3] of: provide a binding for the 'fixed-link' property   Thomas Petazzoni
• [RFC PATCH 2/3] net: phy: call mdiobus_scan() after adding a fixed PHY   Thomas Petazzoni
• [RFC PATCH 3/3] net: mvneta: add support for fixed links   Thomas Petazzoni
• [PATCH 00/10] Orion Watchdog fixes   Thomas Petazzoni
• [PATCH 2/5] iio: at91: Use different prescal, startup mask in MR for different IP   Thomas Petazzoni
• [PATCH 2/5] iio: at91: Use different prescal, startup mask in MR for different IP   Thomas Petazzoni
• [RESEND PATCH v7 00/22] MBus DT binding: The return of PCIe   Thomas Petazzoni
• [PATCH 0/2] ARM: sunxi: Convert DTSI to new CPU bindings   Lorenzo Pieralisi
• [RFC PATCH v4 03/18] Documentation: devicetree: arm: cpus/cpu nodes bindings updates   Lorenzo Pieralisi
• [RFC PATCH v4 03/18] Documentation: devicetree: arm: cpus/cpu nodes bindings updates   Lorenzo Pieralisi
• [RFC PATCH v5 0/1] drivers: mfd: Versatile Express SPC support   Lorenzo Pieralisi
• [RFC PATCH v5 1/1] drivers: mfd: vexpress: add Serial Power Controller (SPC) support   Lorenzo Pieralisi
• [RFC PATCH v5 0/1] drivers: mfd: Versatile Express SPC support   Lorenzo Pieralisi
• [RFC PATCH v5 0/1] drivers: mfd: Versatile Express SPC support   Lorenzo Pieralisi
• [PATCH] gpio-rcar: Add interrupt controller support to the DT bindings   Laurent Pinchart
• [PATCH 0/2] Add PWM polarity flag macros for DT   Laurent Pinchart
• [PATCH 1/2] ARM i.MX53: mba53: Fix PWM backlight DT node   Laurent Pinchart
• [PATCH 2/2] pwm: Add PWM polarity flag macros for DT   Laurent Pinchart
• [PATCH 2/2] pwm: Add PWM polarity flag macros for DT   Laurent Pinchart
• [PATCH 2/2] pwm: Add PWM polarity flag macros for DT   Laurent Pinchart
• [PATCH 2/2] pwm: Add PWM polarity flag macros for DT   Laurent Pinchart
• [PATCH 2/2] pwm: Add PWM polarity flag macros for DT   Laurent Pinchart
• [PATCH 2/2] pwm: Add PWM polarity flag macros for DT   Laurent Pinchart
• [PATCH] gpio-rcar: Add interrupt controller support to the DT bindings   Laurent Pinchart
• [PATCH 2/2] pwm: Add PWM polarity flag macros for DT   Laurent Pinchart
• [PATCH v2 0/4] Add PWM polarity flag macro for DT   Laurent Pinchart
• [PATCH v2 1/4] pwm: Add PWM polarity flag macro for DT   Laurent Pinchart
• [PATCH v2 2/4] pwm: Use the DT macro directly when parsing PWM DT flags   Laurent Pinchart
• [PATCH v2 3/4] pwm: Update DT bindings to reference pwm.txt for cells documentation   Laurent Pinchart
• [PATCH v2 4/4] ARM: dts: Use the PWM polarity flags   Laurent Pinchart
• [PATCH] Documentation: dt: bindings: TI WiLink modules   Laurent Pinchart
• [PATCH V2 5/5] ARM: remove #gpio-ranges-cells property   Laurent Pinchart
• [PATCH v2 0/4] Add PWM polarity flag macro for DT   Laurent Pinchart
• Appended DTB files for multi-machine kernels   Nicolas Pitre
• Appended DTB files for multi-machine kernels   Nicolas Pitre
• [RFC PATCH v5 1/1] drivers: mfd: vexpress: add Serial Power Controller (SPC) support   Nicolas Pitre
• [RFC PATCH v5 0/1] drivers: mfd: Versatile Express SPC support   Nicolas Pitre
• [RFC PATCH v5 0/1] drivers: mfd: Versatile Express SPC support   Nicolas Pitre
• [RFC PATCH v5 0/1] drivers: mfd: Versatile Express SPC support   Nicolas Pitre
• [RFC PATCH v2 01/15] of: add support for retrieving cpu node for a given logical cpu index   Nicolas Pitre
• [RFC PATCH v5 0/1] drivers: mfd: Versatile Express SPC support   Nicolas Pitre
• [RFC PATCH v5 0/1] drivers: mfd: Versatile Express SPC support   Nicolas Pitre
• [RFC PATCH v5 0/1] drivers: mfd: Versatile Express SPC support   Nicolas Pitre
• [PATCH v1 05/24] clk: wrap I/O access for improved portability   Nicolas Pitre
• [PATCH 0/4] dra7: I2C/MCSPI/UART pin control datas   Sourav Poddar
• [PATCH 1/4] arm: dts: dra7: Add initial status for the devices.   Sourav Poddar
• [PATCH 2/4] arm: dts: dra7-evm: Add I2C pinctrl data   Sourav Poddar
• [PATCH 3/4] arm: dts: dra7-evm: Add SPI pinctrl data   Sourav Poddar
• [PATCH 4/4] arm: dts: dra7-evm: Add UART pinctrl data   Sourav Poddar
• [PATCH 2/2] Input: Adding DT support for keyreset tuneables   Mathieu Poirier
• [PATCH 2/2] Input: Adding DT support for keyreset tuneables   Mathieu Poirier
• [PATCH v4] Input: sysrq - DT binding for key sequence   Mathieu Poirier
• [PATCH v5 0/2] ARM: dts: Add USB host support for Beagle-xm   Roger Quadros
• [PATCH v2 4/4] ARM: OMAP2+: Provide alias to USB PHY clock   Roger Quadros
• [PATCH v2 4/4] ARM: OMAP2+: Provide alias to USB PHY clock   Roger Quadros
• [PATCH 0/3] ARM: OMAP2+: omap_device: add dynamic pinctrl handling   Roger Quadros
• [PATCH 0/3] ARM: OMAP2+: omap_device: add dynamic pinctrl handling   Roger Quadros
• [PATCH 0/6] USB: phy: phy-nop: Use RESET controller for managing the reset line   Roger Quadros
• [PATCH 1/6] usb: phy-nop: Use RESET Controller for managing the reset line   Roger Quadros
• [PATCH 2/6] ARM: dts: omap3-beagle: Use reset-gpio driver for hsusb2_reset   Roger Quadros
• [PATCH 3/6] ARM: dts: omap4-panda: Use reset-gpio driver for hsusb1_reset   Roger Quadros
• [PATCH 4/6] ARM: dts: omap5-uevm: Use reset-gpio driver for hsusb2_reset   Roger Quadros
• [PATCH 5/6] ARM: dts: omap3-beagle-xm: Add USB Host support   Roger Quadros
• [PATCH 6/6] ARM: dts: omap3-beagle: Make USB host pin naming consistent   Roger Quadros
• [PATCH 2/2] pwm: Add PWM polarity flag macros for DT   Thierry Reding
• [PATCH 2/2] pwm: Add PWM polarity flag macros for DT   Thierry Reding
• [PATCH 2/2] pwm: Add PWM polarity flag macros for DT   Thierry Reding
• [PATCH V2] pci: exynos: split into two parts such as Synopsys part and Exynos part   Thierry Reding
• [PATCH V5 1/3] pci: Add PCIe driver for Samsung Exynos   Thierry Reding
• [PATCH 2/2] pwm: Add PWM polarity flag macros for DT   Thierry Reding
• [PATCH] of: match the compatible in the order set by the dts file   Thierry Reding
• [PATCH 0/2] ARM: sunxi: Convert DTSI to new CPU bindings   Maxime Ripard
• [PATCH 4/4] iio: lps331ap: Add support for DT   Maxime Ripard
• [Ksummit-2013-discuss] [ATTEND] Handling of devicetree bindings   Guenter Roeck
• [Ksummit-2013-discuss] [ATTEND] Handling of devicetree bindings   Guenter Roeck
• [lm-sensors] [RESEND PATCH V1 0/9] thermal: introduce DT thermal zone build   Guenter Roeck
• [RESEND PATCH V1 8/9] hwmon: lm75: expose to thermal fw via DT nodes   Guenter Roeck
• [RESEND PATCH V1 9/9] hwmon: tmp102: expose to thermal fw via DT nodes   Guenter Roeck
• [lm-sensors] [RESEND PATCH V1 0/9] thermal: introduce DT thermal zone build   Guenter Roeck
• [lm-sensors] [RESEND PATCH V1 0/9] thermal: introduce DT thermal zone build   Guenter Roeck
• [Ksummit-2013-discuss] [ATTEND] Handling of devicetree bindings   Guenter Roeck
• [lm-sensors] [RESEND PATCH V1 0/9] thermal: introduce DT thermal zone build   Guenter Roeck
• [lm-sensors] [RESEND PATCH V1 0/9] thermal: introduce DT thermal zone build   Guenter Roeck
• [RFC PATCH 01/13] misc: atmel_ssc: add device tree DMA support   Bo Shen
• [RFC PATCH 02/13] misc: atmel_ssc: keep the count of pdev->id   Bo Shen
• [RFC PATCH 03/13] ARM: at91: DTS: sam9x5: add clock for SSC DT entry   Bo Shen
• [RFC PATCH 08/13] sound: sam9x5_wm8731: machine driver for at91sam9x5 wm8731 boards   Bo Shen
• [RFC PATCH 01/13] misc: atmel_ssc: add device tree DMA support   Bo Shen
• [RFC PATCH 01/13] misc: atmel_ssc: add device tree DMA support   Bo Shen
• [RFC PATCH] pwm: atmel-pwm: add pwm controller driver   Bo Shen
• [RFC PATCH 01/13] misc: atmel_ssc: add device tree DMA support   Bo Shen
• [RFC PATCH 08/13] sound: sam9x5_wm8731: machine driver for at91sam9x5 wm8731 boards   Bo Shen
• [PATCH v2 1/5] sound: sam9x5_wm8731: machine driver for at91sam9x5 wm8731 boards   Bo Shen
• [PATCH v4 1/7] sound: sam9x5_wm8731: machine driver for at91sam9x5 wm8731 boards   Bo Shen
• [PATCH 0/3] arm: atmel: at91sam9n12: add i2c pinctrl and qt1070 support   Bo Shen
• [PATCH 1/3] arm: atmel: at91sam9n12: add pinctrl of TWI   Bo Shen
• [PATCH 2/3] arm: atmel: at91sam9n12: add qt1070 support   Bo Shen
• [PATCH 3/3] arm: atmel: at91sam9n12: correct pin number of gpio-key   Bo Shen
• [PATCH 2/3] arm: atmel: at91sam9n12: add qt1070 support   Bo Shen
• [PATCH 1/3] arm: atmel: at91sam9n12: add pinctrl of TWI   Bo Shen
• [PATCH v2 0/3] arm: atmel: at91sam9n12: add i2c pinctrl and qt1070 support   Bo Shen
• [PATCH v2 1/3] arm: atmel: at91sam9n12: add pinctrl of TWI   Bo Shen
• [PATCH v2 2/3] arm: atmel: at91sam9n12: add qt1070 support   Bo Shen
• [PATCH v2 3/3] arm: atmel: at91sam9n12: correct pin number of gpio-key   Bo Shen
• [PATCH] ASoC: atmel: add wm8904 based audio machine driver   Bo Shen
• [PATCH] of: match the compatible in the order set by the dts file   Huang Shijie
• [PATCH] of: match the compatible in the order set by the dts file   Huang Shijie
• [PATCH] of: match the compatible in the order set by the dts file   Huang Shijie
• [PATCH] of: match the compatible in the order set by the dts file   Huang Shijie
• [PATCH] of: Specify initrd location using 64-bit   Santosh Shilimkar
• [PATCH v2] of: Specify initrd location using 64-bit   Santosh Shilimkar
• [PATCH 1/3] misc: Add crossbar driver   Santosh Shilimkar
• Re: [PATCH 3/4] PCI: Add driver for i.MX6 PCI Express   Alexander Shiyan
• Re[2]: [PATCH v3 2/5] ARM: dts: imx27: Add imx framebuffer device   Alexander Shiyan
• Re: [PATCH v3 5/5] ARM: dts: Add device tree support for phycard pca100   Alexander Shiyan
• Re: [PATCH] ARM: dts: imx27 phyCARD-S remove wrong I2C RTC   Alexander Shiyan
• Re[2]: [PATCH] ARM: dts: imx27 phyCARD-S remove wrong I2C RTC   Alexander Shiyan
• [PATCH v2] of: Add more stubs for non-OF builds   Alexander Shiyan
• [PATCH] of: Specify initrd location using 64-bit   Sebastian Andrzej Siewior
• [PATCH] of: Specify initrd location using 64-bit   Sebastian Andrzej Siewior
• [PATCH] of/irq: init struct resource to 0 in of_irq_to_resource()   Sebastian Andrzej Siewior
• [PATCH] of/irq: init struct resource to 0 in of_irq_to_resource()   Sebastian Andrzej Siewior
• [PATCH] of: provide of_platform_unpopulate()   Sebastian Andrzej Siewior
• [PATCH] of: provide of_platform_unpopulate()   Sebastian Andrzej Siewior
• [PATCH v1 4/4] spi/xilinx: Use of_property_read_u32 for reading value from node   Michal Simek
• [PATCH v1 4/4] spi/xilinx: Use of_property_read_u32 for reading value from node   Michal Simek
• [PATCH] of: Export of_irq_count for using in modules   Michal Simek
• [PATCH RFC 0/8] MPC512x DMA slave s/g support, OF DMA lookup   Gerhard Sittig
• [PATCH RFC 1/8] powerpc: mpc512x_dma: add support for data transfers between memory and i/o memory   Gerhard Sittig
• [PATCH RFC 2/8] dma: mpc512x: fix start condition in execute()   Gerhard Sittig
• [PATCH RFC 3/8] dma: mpc512x: support 'terminate all' control request   Gerhard Sittig
• [PATCH RFC 4/8] dts: mpc512x: prepare for preprocessor support   Gerhard Sittig
• [PATCH RFC 5/8] dma: mpc512x: use symbolic specifiers for DMA channels   Gerhard Sittig
• [PATCH RFC 6/8] dma: of: Add common xlate function for matching by channel id   Gerhard Sittig
• [PATCH RFC 7/8] dma: mpc512x: register for device tree channel lookup   Gerhard Sittig
• [PATCH RFC 8/8] HACK mmc: mxcmmc: enable clocks for the MPC512x   Gerhard Sittig
• [PATCH RFC 5/8] dma: mpc512x: use symbolic specifiers for DMA channels   Gerhard Sittig
• [PATCH RFC 5/8] dma: mpc512x: use symbolic specifiers for DMA channels   Gerhard Sittig
• [PATCH RFC 1/8] powerpc: mpc512x_dma: add support for data transfers between memory and i/o memory   Gerhard Sittig
• [PATCH RFC v2 0/5] MPC512x DMA slave s/g support, OF DMA lookup   Gerhard Sittig
• [PATCH RFC v2 1/5] dma: mpc512x: re-order mpc8308 specific instructions   Gerhard Sittig
• [PATCH RFC v2 2/5] dma: mpc512x: add support for peripheral transfers   Gerhard Sittig
• [PATCH RFC v2 3/5] dma: of: Add common xlate function for matching by channel id   Gerhard Sittig
• [PATCH RFC v2 4/5] dma: mpc512x: register for device tree channel lookup   Gerhard Sittig
• [PATCH RFC v2 5/5] HACK mmc: mxcmmc: enable clocks for the MPC512x   Gerhard Sittig
• [PATCH v1 00/24] add COMMON_CLK support for PowerPC MPC512x   Gerhard Sittig
• [PATCH v1 01/24] spi: mpc512x: prepare clocks before enabling them   Gerhard Sittig
• [PATCH v1 02/24] serial: mpc512x: prepare clocks before enabling them   Gerhard Sittig
• [PATCH v1 03/24] mtd: mpc5121_nfc: prepare clocks before enabling them   Gerhard Sittig
• [PATCH v1 04/24] powerpc: mpc512x: array decl for MCLK registers in CCM   Gerhard Sittig
• [PATCH v1 05/24] clk: wrap I/O access for improved portability   Gerhard Sittig
• [PATCH v1 06/24] dts: mpc512x: prepare for preprocessor support   Gerhard Sittig
• [PATCH v1 07/24] dts: mpc512x: introduce dt-bindings/clock/ header   Gerhard Sittig
• [PATCH v1 08/24] dts: mpc512x: add clock related device tree specs   Gerhard Sittig
• [PATCH v1 09/24] clk: mpc512x: introduce COMMON_CLK for MPC512x   Gerhard Sittig
• [PATCH v1 10/24] dts: mpc512x: add clock specs for client lookups   Gerhard Sittig
• [PATCH v1 11/24] net: can: mscan: add a comment on reg to idx mapping   Gerhard Sittig
• [PATCH v1 12/24] net: can: mscan: make mpc512x code use common clock   Gerhard Sittig
• [PATCH v1 13/24] spi: mpc512x: OF clock lookup, use the 'mclk' name   Gerhard Sittig
• [PATCH v1 14/24] powerpc/mpc512x: improve DIU related clock setup   Gerhard Sittig
• [PATCH v1 15/24] serial: mpc512x: OF clock lookup, use the 'mclk' name   Gerhard Sittig
• [PATCH v1 16/24] clk: mpc512x: remove now obsolete clkdev registration   Gerhard Sittig
• [PATCH v1 17/24] serial: mpc512x: setup the PSC FIFO clock as well   Gerhard Sittig
• [PATCH v1 18/24] i2c: mpc: OF clock lookup for MPC512x   Gerhard Sittig
• [PATCH v1 19/24] USB: fsl-mph-dr-of: OF clock lookup, prepare and enable   Gerhard Sittig
• [PATCH v1 20/24] fs_enet: OF clock lookup (non-fatal), prepare and enable   Gerhard Sittig
• [PATCH v1 21/24] [media] fsl-viu: OF clock lookup, prepare before enable   Gerhard Sittig
• [PATCH v1 22/24] powerpc/fsl-pci: OF clock lookup, prepare before enable   Gerhard Sittig
• [PATCH v1 23/24] clk: mpc512x: switch to COMMON_CLK, remove PPC_CLOCK   Gerhard Sittig
• [PATCH v1 24/24] net: can: mscan: remove MPC512x non-COMMON_CLK code path   Gerhard Sittig
• [PATCH RFC v2 2/5] dma: mpc512x: add support for peripheral transfers   Gerhard Sittig
• [PATCH v1 01/24] spi: mpc512x: prepare clocks before enabling them   Gerhard Sittig
• [PATCH v1 15/24] serial: mpc512x: OF clock lookup, use the 'mclk' name   Gerhard Sittig
• [PATCH v1 05/24] clk: wrap I/O access for improved portability   Gerhard Sittig
• [PATCH v1 01/24] spi: mpc512x: prepare clocks before enabling them   Gerhard Sittig
• [PATCH v1 05/24] clk: wrap I/O access for improved portability   Gerhard Sittig
• [PATCH v2 00/24] add COMMON_CLK support for PowerPC MPC512x   Gerhard Sittig
• [PATCH v2 01/24] spi: mpc512x: cleanup clock API use   Gerhard Sittig
• [PATCH v2 02/24] serial: mpc512x: cleanup clock API use   Gerhard Sittig
• [PATCH v2 03/24] mtd: mpc5121_nfc: prepare clocks before enabling them   Gerhard Sittig
• [PATCH v2 04/24] powerpc: mpc512x: array decl for MCLK registers in CCM   Gerhard Sittig
• [PATCH v2 05/24] clk: wrap I/O access for improved portability   Gerhard Sittig
• [PATCH v2 06/24] dts: mpc512x: prepare for preprocessor support   Gerhard Sittig
• [PATCH v2 07/24] dts: mpc512x: introduce dt-bindings/clock/ header   Gerhard Sittig
• [PATCH v2 08/24] dts: mpc512x: add clock related device tree specs   Gerhard Sittig
• [PATCH v2 09/24] clk: mpc512x: introduce COMMON_CLK for MPC512x   Gerhard Sittig
• [PATCH v2 10/24] dts: mpc512x: add clock specs for client lookups   Gerhard Sittig
• [PATCH v2 11/24] spi: mpc512x: remove now obsolete clock lookup name   Gerhard Sittig
• [PATCH v2 12/24] serial: mpc512x: remove now obsolete clock lookup name   Gerhard Sittig
• [PATCH v2 13/24] clk: mpc512x: remove now obsolete clkdev registration   Gerhard Sittig
• [PATCH v2 14/24] serial: mpc512x: setup the PSC FIFO clock as well   Gerhard Sittig
• [PATCH v2 15/24] net: can: mscan: add a comment on reg to idx mapping   Gerhard Sittig
• [PATCH v2 16/24] net: can: mscan: make mpc512x code use common clock   Gerhard Sittig
• [PATCH v2 17/24] powerpc/mpc512x: improve DIU related clock setup   Gerhard Sittig
• [PATCH v2 18/24] i2c: mpc: OF clock lookup for MPC512x   Gerhard Sittig
• [PATCH v2 19/24] USB: fsl-mph-dr-of: OF clock lookup, prepare and enable   Gerhard Sittig
• [PATCH v2 20/24] fs_enet: OF clock lookup (non-fatal), prepare and enable   Gerhard Sittig
• [PATCH v2 21/24] [media] fsl-viu: OF clock lookup, prepare before enable   Gerhard Sittig
• [PATCH v2 22/24] powerpc/fsl-pci: OF clock lookup, prepare before enable   Gerhard Sittig
• [PATCH v2 23/24] clk: mpc512x: switch to COMMON_CLK, remove PPC_CLOCK   Gerhard Sittig
• [PATCH v2 24/24] net: can: mscan: remove MPC512x non-COMMON_CLK code path   Gerhard Sittig
• [PATCH v2 18/24] i2c: mpc: OF clock lookup for MPC512x   Gerhard Sittig
• [PATCH v2 16/24] net: can: mscan: make mpc512x code use common clock   Gerhard Sittig
• [PATCH v2 4/4] ARM: OMAP2+: Provide alias to USB PHY clock   Arend van Spriel
• [PATCH v2 4/4] ARM: OMAP2+: Provide alias to USB PHY clock   Arend van Spriel
• [PATCH 01/15] drivers: phy: add generic PHY framework   Alan Stern
• [PATCH 01/15] drivers: phy: add generic PHY framework   Alan Stern
• [PATCH v2 1/6] misc: sram: fix error path in sram_probe   Heiko Stübner
• [PATCH v3 0/6] ARM: rockchip: add smp functionality   Heiko Stübner
• [PATCH v3 1/6] misc: sram: fix error path in sram_probe   Heiko Stübner
• [PATCH v3 2/6] misc: sram: add ability to mark sram sections as reserved   Heiko Stübner
• [PATCH v3 3/6] ARM: rockchip: add snoop-control-unit   Heiko Stübner
• [PATCH v3 4/6] ARM: rockchip: add sram dt nodes and documentation   Heiko Stübner
• [PATCH v3 5/6] ARM: rockchip: add power-management-unit dt node   Heiko Stübner
• [PATCH v3 6/6] ARM: rockchip: add smp bringup code   Heiko Stübner
• [PATCH v3 2/6] misc: sram: add ability to mark sram sections as reserved   Heiko Stübner
• [PATCH 0/9] clocksource: dw_apb_timer: support for timer variant used in rk3188 SoCs   Heiko Stübner
• [PATCH 1/9] clocksource: dw_apb_timer: infrastructure to handle quirks   Heiko Stübner
• [PATCH 2/9] clocksource: dw_apb_timer: flexible register addresses   Heiko Stübner
• [PATCH 3/9] clocksource: dw_apb_timer: quirk for variants with 64bit counter   Heiko Stübner
• [PATCH 4/9] clocksource: dw_apb_timer: use the eoi callback to clear pending interrupts   Heiko Stübner
• [PATCH 5/9] clocksource: dw_apb_timer: quirk for variants without EOI register   Heiko Stübner
• [PATCH 6/9] clocksource: dw_apb_timer: quirk for inverted int mask   Heiko Stübner
• [PATCH 7/9] clocksource: dw_apb_timer: quirk for inverted timer mode setting   Heiko Stübner
• [PATCH 8/9] clocksource: dw_apb_timer_of: add quirk handling   Heiko Stübner
• [PATCH 9/9] clocksource: dw_apb_timer: special variant for rockchip rk3188 timers   Heiko Stübner
• [PATCH 6/9] clocksource: dw_apb_timer: quirk for inverted int mask   Heiko Stübner
• [PATCH 5/9] clocksource: dw_apb_timer: quirk for variants without EOI register   Heiko Stübner
• [PATCH 4/9] clocksource: dw_apb_timer: use the eoi callback to clear pending interrupts   Heiko Stübner
• [PATCH v3 2/2] drivers: dma-contiguous: add initialization from device tree   Marek Szyprowski
• [PATCH 2/2] Input: Adding DT support for keyreset tuneables   Dmitry Torokhov
• [PATCH 2/2] Input: Adding DT support for keyreset tuneables   Dmitry Torokhov
• [PATCH 2/2] Input: Adding DT support for keyreset tuneables   Dmitry Torokhov
• [PATCH v3] Input: sysrq - DT binding for key sequences   Dmitry Torokhov
• [PATCH v3 3/5] clk: dt: binding for basic multiplexer clock   Mike Turquette
• [PATCH] of: Specify initrd location using 64-bit   Geert Uytterhoeven
• [PATCHv3 2/3] ARM: mxs: cfa10049: Switch bus i2c1 to bitbanging   Marek Vasut
• [PATCH v2 1/5] iio: mxs-lradc: change the realbits to 12   Marek Vasut
• [PATCH v2 2/5] ARM: dts: add reference voltage property for MXS LRADC   Marek Vasut
• [PATCH v2 3/5] iio: mxs-lradc: add scale attribute to channels   Marek Vasut
• [PATCH v2 5/5] iio: mxs-lradc: add write_raw function to modify scale   Marek Vasut
• [PATCH v2 3/5] iio: mxs-lradc: add scale attribute to channels   Marek Vasut
• [PATCH v2 5/5] iio: mxs-lradc: add write_raw function to modify scale   Marek Vasut
• [PATCH v2 5/5] iio: mxs-lradc: add write_raw function to modify scale   Marek Vasut
• [PATCH 0/4] Add SMP support for MSM8660, MSM8960 and MSM8974   Rohit Vaswani
• [PATCH 0/4] clk: Samsung: audss: Add support for Exynos5420   Padmavathi Venna
• [PATCH 1/4] clk: exynos-audss: add support for Exynos 5420   Padmavathi Venna
• [PATCH 2/4] clk: exynos-audss: allow input clocks to be specified in device tree   Padmavathi Venna
• [PATCH 3/4] ARM: dts: Correct the /include entry on exynos5420 dtsi file   Padmavathi Venna
• [PATCH 4/4] ARM: dts: exynos5420: add audio clock controller   Padmavathi Venna
• [PATCH 0/2] Move comon DMA nodes to exynos5.dtsi and   Padmavathi Venna
• [PATCH 1/2] ARM: dts: Move the common DMA controller nodes to exynos5.dtsi   Padmavathi Venna
• [PATCH 2/2] ARM: dts: Add DMA controller node info on Exynos5420.   Padmavathi Venna
• [Ksummit-2013-discuss] [ATTEND] Handling of devicetree bindings   Linus Walleij
• [Ksummit-2013-discuss] [ATTEND] Handling of devicetree bindings   Linus Walleij
• [Ksummit-2013-discuss] [ATTEND] Handling of devicetree bindings   Linus Walleij
• [Ksummit-2013-discuss] [ATTEND] Handling of devicetree bindings   Linus Walleij
• [PATCH 3/3] MAINTAINERS: Refactor device tree maintainership   Linus Walleij
• New device tree mailing list   Linus Walleij
• [PATCH v4 1/3] gpio-tz1090: add TZ1090 gpio driver   Linus Walleij
• [PATCH v4 2/3] gpio-tz1090-pdc: add TZ1090 PDC gpio driver   Linus Walleij
• [PATCH 1/3] mfd: add LP3943 MFD driver   Linus Walleij
• [PATCH] gpio-rcar: Add interrupt controller support to the DT bindings   Linus Walleij
• [Ksummit-2013-discuss] [ATTEND] Handling of devicetree bindings   Linus Walleij
• [PATCH 1/3] misc: Add crossbar driver   Linus Walleij
• [PATCH 1/3] misc: Add crossbar driver   Linus Walleij
• binding for nvec mfd device   Stephen Warren
• Appended DTB files for multi-machine kernels   Stephen Warren
• [PATCH 2/4] pinmux: Add TB10x pinmux driver   Stephen Warren
• [PATCH] of: match the compatible in the order set by the dts file   Stephen Warren
• [PATCH] of: match the compatible in the order set by the dts file   Stephen Warren
• [PATCH v7 11/22] PCI: mvebu: Adapt to the new device tree layout   Stephen Warren
• [PATCH 2/4] pinmux: Add TB10x pinmux driver   Stephen Warren
• [PATCH 2/2] pwm: Add PWM polarity flag macros for DT   Stephen Warren
• [PATCH 2/2] pwm: Add PWM polarity flag macros for DT   Stephen Warren
• [PATCH 2/2] pwm: Add PWM polarity flag macros for DT   Stephen Warren
• [PATCH 2/2] pwm: Add PWM polarity flag macros for DT   Stephen Warren
• [PATCH 2/2] pwm: Add PWM polarity flag macros for DT   Stephen Warren
• [PATCH 2/2] pwm: Add PWM polarity flag macros for DT   Stephen Warren
• Sharing *.dtsi between Linux architectures?   Stephen Warren
• [PATCH V2 1/5] gpio: clean up gpio-ranges documentation   Stephen Warren
• [PATCH V2 2/5] of: move documentation of of_parse_phandle_with_args   Stephen Warren
• [PATCH V2 3/5] of: introduce of_parse_phandle_with_fixed_args   Stephen Warren
• [PATCH V2 4/5] gpio: implement gpio-ranges binding document fix   Stephen Warren
• [PATCH V2 5/5] ARM: remove #gpio-ranges-cells property   Stephen Warren
• [PATCH V2 5/5] ARM: remove #gpio-ranges-cells property   Stephen Warren
• [PATCH V2 3/5] of: introduce of_parse_phandle_with_fixed_args   Stephen Warren
• [PATCH v8] reset: Add driver for gpio-controlled reset pins   Stephen Warren
• [PATCH 2/2] pwm: Add PWM polarity flag macros for DT   Stephen Warren
• [PATCH v8] reset: Add driver for gpio-controlled reset pins   Stephen Warren
• [PATCH v8] reset: Add driver for gpio-controlled reset pins   Stephen Warren
• [PATCH v8] reset: Add driver for gpio-controlled reset pins   Stephen Warren
• [PATCH v9] reset: Add driver for gpio-controlled reset pins   Stephen Warren
• [PATCH 2/4] pinmux: Add TB10x pinmux driver   Stephen Warren
• [PATCH V2 5/5] ARM: remove #gpio-ranges-cells property   Stephen Warren
• [PATCH V2 5/5] ARM: remove #gpio-ranges-cells property   Stephen Warren
• [patch] spi/xilinx: signedness issue checking platform_get_irq()   Stephen Warren
• [PATCH v8] reset: Add driver for gpio-controlled reset pins   Stephen Warren
• [PATCH 2/2] pwm: Add PWM polarity flag macros for DT   Stephen Warren
• [PATCH v8] reset: Add driver for gpio-controlled reset pins   Stephen Warren
• [PATCH v2 0/4] Add PWM polarity flag macro for DT   Stephen Warren
• [PATCH] reset: allow drivers to request probe deferral   Stephen Warren
• [lm-sensors] [RESEND PATCH V1 0/9] thermal: introduce DT thermal zone build   Stephen Warren
• [PATCH 2/4] pinmux: Add TB10x pinmux driver   Stephen Warren
• [PATCH v8] reset: Add driver for gpio-controlled reset pins   Stephen Warren
• [PATCH 01/15] drivers: phy: add generic PHY framework   Stephen Warren
• [PATCH 1/4] arm: dts: dra7: Add initial status for the devices.   Stephen Warren
• [lm-sensors] [RESEND PATCH V1 0/9] thermal: introduce DT thermal zone build   Stephen Warren
• [lm-sensors] [RESEND PATCH V1 0/9] thermal: introduce DT thermal zone build   Stephen Warren
• [PATCH 2/2] DMA: Freescale: update driver to support 8-channel DMA engine   Scott Wood
• [PATCH 1/2] DMA: Freescale: Add new 8-channel DMA engine device tree nodes   Scott Wood
• [PATCH V2 1/2] DMA: Freescale: Add new 8-channel DMA engine device tree nodes   Scott Wood
• [PATCH V2 1/2] DMA: Freescale: Add new 8-channel DMA engine device tree nodes   Scott Wood
• [PATCH v3 1/2] DMA: Freescale: Add new 8-channel DMA engine device tree nodes   Scott Wood
• [Ksummit-2013-discuss] [ATTEND] Handling of devicetree bindings   David Woodhouse
• [Ksummit-2013-discuss] [ATTEND] Handling of devicetree bindings   David Woodhouse
• [PATCH] leds: Add device tree binding for pca9633   Bryan Wu
• [PATCH -next] spi: tegra114: remove redundant dev_err call in tegra_spi_probe()   Wei Yongjun
• [PATCH -next] [SCSI] ufshcd-pltfrm: remove redundant dev_err call in ufshcd_pltfrm_probe()   Wei Yongjun
• [PATCH -next] net: ethernet: davinci_emac: remove redundant dev_err call in davinci_emac_probe()   Wei Yongjun
• [PATCH] ASoC: mop500: add .owner to struct snd_soc_card   Wei Yongjun
• [PATCH] ARM: u300: fix return value check in __u300_init_boardpower()   Wei Yongjun
• [PATCH] ASoC: imx-sgtl5000: fix error return code in imx_sgtl5000_probe()   Wei Yongjun
• [PATCH -next] mtd: orion_nand: convert to use devm_* APIs   Wei Yongjun
• [PATCH -next] Input: olpc_apsp - remove redundant dev_err call in olpc_apsp_probe()   Wei Yongjun
• [PATCH] msm_serial: add missing iounmap() on error in msm_request_port()   Wei Yongjun
• [PATCH 1/2] ARM: dts: mx53qsb: Enable VPU support   Philipp Zabel
• [PATCH v2 1/6] misc: sram: fix error path in sram_probe   Philipp Zabel
• [PATCH v3 1/6] misc: sram: fix error path in sram_probe   Philipp Zabel
• [PATCH v3 2/6] misc: sram: add ability to mark sram sections as reserved   Philipp Zabel
• [PATCH v8] reset: Add driver for gpio-controlled reset pins   Philipp Zabel
• [PATCH v8] reset: Add driver for gpio-controlled reset pins   Philipp Zabel
• [PATCH v8] reset: Add driver for gpio-controlled reset pins   Philipp Zabel
• [PATCH v9] reset: Add driver for gpio-controlled reset pins   Philipp Zabel
• [PATCH v8] reset: Add driver for gpio-controlled reset pins   Philipp Zabel
• [PATCH v10] reset: Add driver for gpio-controlled reset pins   Philipp Zabel
• [PATCH] reset: allow drivers to request probe deferral   Philipp Zabel
• [PATCH V3 0/3] bring up pxa988 with DT   Neil Zhang
• [PATCH V3 1/3] dts: change Marvell prefix to 'marvell'   Neil Zhang
• [PATCH V3 2/3] clocksource: mmp: support CLOCKSOURCE OF DECLARE   Neil Zhang
• [PATCH V3 3/3] ARM: mmp: bring up pxa988 with device tree support   Neil Zhang
• [PATCH V3 1/3] dts: change Marvell prefix to 'marvell'   Neil Zhang
• [PATCH V3 1/3] dts: change Marvell prefix to 'marvell'   Neil Zhang
• [PATCH V3 2/3] clocksource: mmp: support CLOCKSOURCE OF DECLARE   Neil Zhang
• [PATCH V3 3/3] ARM: mmp: bring up pxa988 with device tree support   Neil Zhang
• [PATCH V3 1/3] dts: change Marvell prefix to 'marvell'   Neil Zhang
• [PATCH V3 2/3] clocksource: mmp: support CLOCKSOURCE OF DECLARE   Haojian Zhuang
• [PATCH V3 1/3] dts: change Marvell prefix to 'marvell'   Haojian Zhuang
• [PATCH V3 1/3] dts: change Marvell prefix to 'marvell'   Haojian Zhuang
• [PATCH V3 2/3] clocksource: mmp: support CLOCKSOURCE OF DECLARE   Haojian Zhuang
• [PATCH V3 1/3] dts: change Marvell prefix to 'marvell'   Haojian Zhuang
• [PATCH V3 1/3] dts: change Marvell prefix to 'marvell'   Haojian Zhuang
• [PATCH] watchdog: dw: Enable OF support for DW watchdog timer.   dinguyen at altera.com
• [PATCHv2] watchdog: dw: Enable OF support for DW watchdog timer.   dinguyen at altera.com
• [PATCHv4] ARM: socfpga: dts: Add support for SD/MMC   dinguyen at altera.com
• [RFC PATCH v2 00/15] DT/core: update cpu device of_node   Sudeep.KarkadaNagesha at arm.com
• [RFC PATCH v2 01/15] of: add support for retrieving cpu node for a given logical cpu index   Sudeep.KarkadaNagesha at arm.com
• [RFC PATCH v2 02/15] driver/core: cpu: initialize of_node in cpu's device struture   Sudeep.KarkadaNagesha at arm.com
• [RFC PATCH v2 03/15] ARM: DT/kernel: define ARM specific arch_match_cpu_phys_id   Sudeep.KarkadaNagesha at arm.com
• [RFC PATCH v2 04/15] ARM: topology: remove hwid/MPIDR dependency from cpu_capacity   Sudeep.KarkadaNagesha at arm.com
• [RFC PATCH v2 05/15] ARM: mvebu: remove device tree parsing for cpu nodes   Sudeep.KarkadaNagesha at arm.com
• [RFC PATCH v2 06/15] drivers/bus: arm-cci: avoid parsing DT for cpu device nodes   Sudeep.KarkadaNagesha at arm.com
• [RFC PATCH v2 07/15] cpufreq: imx6q-cpufreq: remove device tree parsing for cpu nodes   Sudeep.KarkadaNagesha at arm.com
• [RFC PATCH v2 08/15] cpufreq: cpufreq-cpu0: remove device tree parsing for cpu nodes   Sudeep.KarkadaNagesha at arm.com
• [RFC PATCH v2 09/15] cpufreq: highbank-cpufreq: remove device tree parsing for cpu nodes   Sudeep.KarkadaNagesha at arm.com
• [RFC PATCH v2 10/15] cpufreq: spear-cpufreq: remove device tree parsing for cpu nodes   Sudeep.KarkadaNagesha at arm.com
• [RFC PATCH v2 11/15] cpufreq: kirkwood-cpufreq: remove device tree parsing for cpu nodes   Sudeep.KarkadaNagesha at arm.com
• [RFC PATCH v2 12/15] cpufreq: arm_big_little: remove device tree parsing for cpu nodes   Sudeep.KarkadaNagesha at arm.com
• [RFC PATCH v2 13/15] cpufreq: maple-cpufreq: remove device tree parsing for cpu nodes   Sudeep.KarkadaNagesha at arm.com
• [RFC PATCH v2 14/15] cpufreq: pmac64-cpufreq: remove device tree parsing for cpu nodes   Sudeep.KarkadaNagesha at arm.com
• [RFC PATCH v2 15/15] cpufreq: pmac32-cpufreq: remove device tree parsing for cpu nodes   Sudeep.KarkadaNagesha at arm.com
• [PATCH v3] Input: sysrq - DT binding for key sequences   mathieu.poirier at linaro.org
• [PATCH v4] Input: sysrq - DT binding for key sequence   mathieu.poirier at linaro.org
• [PATCH v5] Input: sysrq - DT binding for key sequence   mathieu.poirier at linaro.org

Last message date: Mon Jul 22 10:55:58 EST 2013
Archived on: Mon Jul 22 10:56:24 EST 2013

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...