[PATCH 00/15] PHY framework
Kishon Vijay Abraham I
kishon at ti.com
Thu Jul 18 16:46:09 EST 2013
Added a generic PHY framework that provides a set of APIs for the PHY drivers
to create/destroy a PHY and APIs for the PHY users to obtain a reference to
the PHY with or without using phandle.
This framework will be of use only to devices that uses external PHY (PHY
functionality is not embedded within the controller).
The intention of creating this framework is to bring the phy drivers spread
all over the Linux kernel to drivers/phy to increase code re-use and to
increase code maintainability.
Comments to make PHY as bus wasn't done because PHY devices can be part of
other bus and making a same device attached to multiple bus leads to bad
design.
If the PHY driver has to send notification on connect/disconnect, the PHY
driver should make use of the extcon framework. Using this susbsystem
to use extcon framwork will have to be analysed.
Exynos MIPI CSIS/DSIM PHY and Displayport PHY have started using this
framework. Have included those patches also in this series.
twl4030-usb and omap-usb2 have also been adapted to this framework.
These patches are also available @
git://gitorious.org/linuxphy/linuxphy.git tags/phy-for-v3.12
Jingoo Han (3):
phy: Add driver for Exynos DP PHY
video: exynos_dp: remove non-DT support for Exynos Display Port
video: exynos_dp: Use the generic PHY driver
Kishon Vijay Abraham I (8):
drivers: phy: add generic PHY framework
usb: phy: omap-usb2: use the new generic PHY framework
usb: phy: twl4030: use the new generic PHY framework
ARM: OMAP: USB: Add phy binding information
ARM: dts: omap: update usb_otg_hs data
usb: musb: omap2430: use the new generic PHY framework
usb: phy: omap-usb2: remove *set_suspend* callback from omap-usb2
usb: phy: twl4030-usb: remove *set_suspend* and *phy_init* ops
Sylwester Nawrocki (4):
phy: Add driver for Exynos MIPI CSIS/DSIM DPHYs
video: exynos_mipi_dsim: Use the generic PHY driver
exynos4-is: Use the generic MIPI CSIS PHY driver
ARM: Samsung: Remove the MIPI PHY setup code
.../devicetree/bindings/phy/phy-bindings.txt | 66 +++
.../devicetree/bindings/phy/samsung-phy.txt | 22 +
Documentation/devicetree/bindings/usb/omap-usb.txt | 5 +
Documentation/devicetree/bindings/usb/usb-phy.txt | 6 +
.../devicetree/bindings/video/exynos_dp.txt | 18 +-
Documentation/phy.txt | 129 +++++
MAINTAINERS | 7 +
arch/arm/boot/dts/omap3-beagle-xm.dts | 2 +
arch/arm/boot/dts/omap3-evm.dts | 2 +
arch/arm/boot/dts/omap3-overo.dtsi | 2 +
arch/arm/boot/dts/omap4.dtsi | 3 +
arch/arm/boot/dts/twl4030.dtsi | 1 +
arch/arm/mach-exynos/include/mach/regs-pmu.h | 5 -
arch/arm/mach-omap2/usb-musb.c | 3 +
arch/arm/mach-s5pv210/include/mach/regs-clock.h | 4 -
arch/arm/plat-samsung/Kconfig | 5 -
arch/arm/plat-samsung/Makefile | 1 -
arch/arm/plat-samsung/setup-mipiphy.c | 60 ---
drivers/Kconfig | 2 +
drivers/Makefile | 2 +
drivers/media/platform/exynos4-is/mipi-csis.c | 16 +-
drivers/phy/Kconfig | 28 +
drivers/phy/Makefile | 7 +
drivers/phy/phy-core.c | 544 ++++++++++++++++++++
drivers/phy/phy-exynos-dp-video.c | 111 ++++
drivers/phy/phy-exynos-mipi-video.c | 169 ++++++
drivers/usb/musb/Kconfig | 1 +
drivers/usb/musb/musb_core.c | 1 +
drivers/usb/musb/musb_core.h | 3 +
drivers/usb/musb/omap2430.c | 26 +-
drivers/usb/phy/Kconfig | 1 +
drivers/usb/phy/phy-omap-usb2.c | 60 ++-
drivers/usb/phy/phy-twl4030-usb.c | 63 ++-
drivers/video/exynos/Kconfig | 2 +-
drivers/video/exynos/exynos_dp_core.c | 132 ++---
drivers/video/exynos/exynos_dp_core.h | 110 ++++
drivers/video/exynos/exynos_dp_reg.c | 2 -
drivers/video/exynos/exynos_mipi_dsi.c | 19 +-
include/linux/phy/phy.h | 344 +++++++++++++
include/linux/platform_data/mipi-csis.h | 11 +-
include/linux/usb/musb.h | 3 +
include/video/exynos_dp.h | 131 -----
include/video/exynos_mipi_dsim.h | 6 +-
43 files changed, 1746 insertions(+), 389 deletions(-)
create mode 100644 Documentation/devicetree/bindings/phy/phy-bindings.txt
create mode 100644 Documentation/devicetree/bindings/phy/samsung-phy.txt
create mode 100644 Documentation/phy.txt
delete mode 100644 arch/arm/plat-samsung/setup-mipiphy.c
create mode 100644 drivers/phy/Kconfig
create mode 100644 drivers/phy/Makefile
create mode 100644 drivers/phy/phy-core.c
create mode 100644 drivers/phy/phy-exynos-dp-video.c
create mode 100644 drivers/phy/phy-exynos-mipi-video.c
create mode 100644 include/linux/phy/phy.h
delete mode 100644 include/video/exynos_dp.h
--
1.7.10.4
More information about the devicetree-discuss
mailing list