Best practice device tree design for display subsystems/DRM

Inki Dae inki.dae at samsung.com
Wed Jul 3 16:42:16 EST 2013



> -----Original Message-----
> From: dri-devel-bounces+inki.dae=samsung.com at lists.freedesktop.org
> [mailto:dri-devel-bounces+inki.dae=samsung.com at lists.freedesktop.org] On
> Behalf Of Stephane Marchesin
> Sent: Wednesday, July 03, 2013 10:46 AM
> To: Dave Airlie
> Cc: Jean-Francois Moine; Daniel Drake;
devicetree-discuss at lists.ozlabs.org;
> dri-devel at lists.freedesktop.org; Russell King; Sebastian Hesselbarth
> Subject: Re: Best practice device tree design for display subsystems/DRM
> 
> On Tue, Jul 2, 2013 at 3:02 PM, Dave Airlie <airlied at gmail.com> wrote:
> > On Wed, Jul 3, 2013 at 7:50 AM, Sascha Hauer <s.hauer at pengutronix.de>
> wrote:
> >> On Tue, Jul 02, 2013 at 09:25:48PM +0100, Russell King wrote:
> >>> On Tue, Jul 02, 2013 at 09:57:32PM +0200, Sebastian Hesselbarth wrote:
> >>> > I am against a super node which contains lcd and dcon/ire nodes. You
> can
> >>> > enable those devices on a per board basis. We add them to dove.dtsi
> but
> >>> > disable them by default (status = "disabled").
> >>> >
> >>> > The DRM driver itself should get a video-card node outside of
> >>> > soc/internal-regs where you can put e.g. video memory hole (or video
> >>> > mem size if it will be taken from RAM later)
> >>> >
> >>> > About the unusual case, I guess we should try to get both lcd
> >>> > controllers into one DRM driver. Then support mirror or screen
> >>> > extension X already provides. For those applications where you want
> >>> > X on one lcd and some other totally different video stream - wait
> >>> > for someone to come up with a request or proposal.
> >>>
> >>> Well, all I can say then is that the onus is on those who want to
> treat
> >>> the components as separate devices to come up with some foolproof way
> >>> to solve this problem which doesn't involve making assumptions about
> >>> the way that devices are probed and doesn't end up creating artificial
> >>> restrictions on how the devices can be used - and doesn't end up
> burdening
> >>> the common case with lots of useless complexity that they don't need.
> >>>
> >>> It's _that_ case which needs to come up with a proposal about how to
> >>> handle it because you _can't_ handle it at the moment in any sane
> >>> manner which meets the criteria I've set out above, and at the moment
> >>> the best proposal by far to resolve that is the "super node" approach.
> >>>
> >>> There is _no_ way in the device model to combine several individual
> >>> devices together into one logical device safely when the subsystem
> >>> requires that there be a definite point where everything is known.
> >>> That applies even more so with -EPROBE_DEFER.  With the presence of
> >>> such a thing, there is now no logical point where any code can say
> >>> definitively that the system has technically finished booting and all
> >>> resources are known.
> >>>
> >>> That's the problem - if you don't od the super-node approach, you end
> >>> up with lots of individual devices which you have to figure out some
> >>> way of combining, and coping with missing ones which might not be
> >>> available in the order you want them to be, etc.
> >>>
> >>> That's the advantage of the "super node" approach - it's a container
> >>> to tell you what's required in order to complete the creation of the
> >>> logical device, and you can parse the sub-nodes to locate the
> >>> information you need.
> >>
> >> I think such an approach would lead to drm drivers which all parse
> their
> >> "super nodes" themselves and driver authors would become very creative
> >> how such a node should look like.
> >>
> >> Also this gets messy with i2c devices which are normally registered
> >> under their i2c bus masters. With the super node approach these would
> >> have to live under the super node, maybe with a phandle to the i2c bus
> >> master. This again probably leads to very SoC specific solutions. It
> >> also doesn't solve the problem that the i2c bus master needs to be
> >> registered by the time the DRM driver probes.
> >>
> >> On i.MX the IPU unit not only handles the display path but also the
> >> capture path. v4l2 begins to evolve an OF model in which each
> (sub)device
> >> has its natural position in the devicetree; the devices are then
> >> connected with phandles. I'm not sure how good this will work together
> >> with a super node approach.
> >>
> >>>
> >>> An alternative as I see it is that DRM - and not only DRM but also
> >>> the DRM API and Xorg - would need to evolve hotplug support for the
> >>> various parts of the display subsystem.  Do we have enough people
> >>> with sufficient knowledge and willingness to be able to make all
> >>> that happen?  I don't think we do, and I don't see that there's any
> >>> funding out there to make such a project happen, which would make it
> >>> a volunteer/spare time effort.
> >>
> >> +1 for this solution, even if this means more work to get from the
> >> ground.
> >>
> >> Do we really need full hotplug support in the DRM API and Xorg? I mean
> >> it would really be nice if Xorg detected a newly registered device, but
> >> as a start it should be sufficient when Xorg detects what's there when
> >> it starts, no?
> >
> > Since fbdev and fbcon sit on top of drm to provide the console
> > currently I'd also expect some fun with them. How do I get a console
> > if I have no outputs at boot, but I have crtcs? do I just wait around
> > until an output appears.
> >
> > There are a number of issues with hotplugging encoders and connectors
> > at runtime, when really the SoC/board designer knows what it provides
> > and should be able to tell the driver in some fashion.
> >
> > The main problems when I played with hot adding eDP on Intel last
> > time, are we have grouping of crtc/encoder/connectors for multi-seat
> > future use, these groups need to be updated, and I think the other
> > issue was updating the possible_crtcs/possible_clones stuff. In theory
> > sending X a uevent will make it reload the list, and it mostly deals
> > with device hotplug since 1.14 when I added the USB hotplug support.
> >
> > I'm not saying this is a bad idea, but really it seems pointless where
> > the hardware is pretty much hardcoded, that DT can't represent that
> > and let the driver control the bring up ordering.
> >
> > Have you also considered how suspend/resume works in such a place,
> > where every driver is independent? The ChromeOS guys have bitched
> > before about the exynos driver which is has lots of sub-drivers, how
> > do you control the s/r ordering in a crazy system like that? I'd
> > prefer a central driver, otherwise there is too many moving parts.
> 
> In my experience with exynos, having separate drivers creates a lot of
> pain at the interfaces and transitions:
> 
> - on boot you need to make sure that those multiple drivers initialize
> in the right order. If one comes up too late, the next one doesn't get
> the EDID through some passthrough or loses a hotplug interrupt.
> 
> - on dpms or on modeset, the order in which things change is also
> important. For example if you have a DisplayPort bridge you sometimes
> need to train the link with a signal from the previous component, if
> the signal isn't there yet training fails.
> 
> - on suspend/resume, turning things on/off in the right order is also
> important. Again that can bite you when one component implicitly
> relies on the next guy in the chain to hold its signal or its clock
> until it's off. As you add/remove drivers in other places, the driver
> suspend/resume queues will order operations differently and will
> expose or hide race conditions. The bug reports look like "Graphics
> crashes when I enable the wifi". Another example is that the screen
> was showing noise for a second when resuming; this happens because the
> bridge is up first and doesn't have data to show. Or you turn on the
> first chip, but it needs a passthrough for the HPD line from the next
> guy which isn't up yet. So you decide that actually nothing is plugged
> in and you give up.
> 
> - the pm_runtime stuff is entangled with the code. grep tells me there
> are 67 lines containing "pm_runtime" in exynos drm. A lot of it is
> non-obvious.
> 
> - each driver needs to be self-standing and needs to keep some of its
> own state. Things like "am I suspended or not" don't need to be
> re-implemented in each driver. However if you can suspend/resume in
> arbitrary order and want to synchronize with your buddies, then you
> need to know your state. exynos drivers do their own state tracking
> (grep -- "->suspended")
> 
> So overall, yes you can make it "work" with multiple small,
> independent drivers where each driver has its own device tree node.
> However you will need global variables to synchronize these drivers.
> You will need cross-driver function calls (exynos_drm_device_register)
> to make it work. You will need to add loops to wait for the previous
> component to successfully initialize (or shutdown), and only then kick
> DisplayPort link training (or turn the transmitter off). That makes
> the code convoluted, and it's really hard to make it work well and to
> maintain it. In my opinion this is much more work to debug this than
> to just order things right from the start. It also doesn't scale as
> you add more drivers.
> 
> So we went in the super-node direction. What we do in Chrome OS (and
> we're still working on this; we still have separate DT nodes which we
> plan to merge which is the last step) is look at the device tree
> during DRM initialization to know which chips are present. With that
> we know which subdrivers to instantiate into DRM abstractions. We then
> use the normal DRM code for everything*. Since most issues I outlined
> above revolve around ordering, they disappear once you turn your
> separate drivers into proper DRM components. You also don't need
> pm_runtime in there at all if you use DRM properly, because instead
> suspend/resume will call DRM which will call into the dpms callbacks
> as needed. For exynos we could also remove most of the per-driver
> state tracking (DRM does it for you) and also remove code used to wrap
> a non-DRM driver into a DRM driver (see exynos_drm_hdmi.c for an
> example of such a wrapper).
> 

Interesting and that is really what we want. Actually, we had thought it
over but we couldn't afford to do it. Where I can refer to the relevant
codes from? I'd like to look into it. And please post it as RFC so that we
can discuss it.

Thanks,
Inki Dae

> Stéphane
> 
> * For our specific case, we needed an additional abstraction, the
> drm_bridge, to handle a chip after the drm_connector (it's not
> specific to ARM, other platforms have also needed this in the past,
> see for example the drivers in drivers/gpu/drm/i2c/*). We intend to
> upstream this bit once we're happy with the interface.
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel



More information about the devicetree-discuss mailing list