[PATCH 4/4] iio: lps331ap: Add support for DT

[Maxime Ripard]

Hi Jacek,

I find myself needing these bindings as well, so I'm definitely
interested by your patches.

On Tue, Jul 02, 2013 at 02:15:38PM +0200, Lukasz Czerwinski wrote:
> From: Jacek Anaszewski <j.anaszewski at samsung.com>
> 
> This patch adds DT support for the lps331ap barometer
> sensor.
> 
> Signed-off-by: Jacek Anaszewski <j.anaszewski at samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
> ---
>  .../bindings/iio/pressure/st_pressure.txt          |   41 ++++++++++++++++++++
>  drivers/iio/pressure/st_pressure_i2c.c             |    9 +++++
>  drivers/iio/pressure/st_pressure_spi.c             |    9 +++++
>  3 files changed, 59 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/pressure/st_pressure.txt
> 
> diff --git a/Documentation/devicetree/bindings/iio/pressure/st_pressure.txt b/Documentation/devicetree/bindings/iio/pressure/st_pressure.txt
> new file mode 100644
> index 0000000..73a4b7d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/pressure/st_pressure.txt
> @@ -0,0 +1,41 @@
> +* STMicroelectronics LPS331AP barometer sensor
> +
> +Required properties:
> +
> +  - compatible : should be "lps331ap"
> +  - reg : the I2C address of the barometer
> +
> +Optional properties:
> +
> +  - drdy-int-pin : redirect DRDY on pin INT1 (1) or pin INT2 (2) (u8)
> +  - interrupt-parent : phandle to the interrupt map subnode
> +  - interrupts : interrupt mapping for LPS331AP interrupt sources:
> +		2 sources: 0 - INT1, 1 - INT2

Maybe you could use interrupts-names here, instead of requiring to
hardcode the interrupt index. Plus, I guess that it's assuming that you
can only use INT2 when you already use INT1?

> +  - irq-map : irq sub-node defining interrupt map
> +	      (all properties listed below are required):
> +      - #interrupt-cells : should be 1
> +      - #address-cells : should be 0
> +      - #size-cells : should be 0
> +      - interrupt-map : table of entries consisting of three child elements:
> +	  - unit_interrupt_specifier - 0 : INT1, 1 : INT2
> +	  - interrupt parent phandle
> +	  - parent unit interrupt specifier consisiting of two elements:
> +	      - index of the interrupt within the controller
> +	      - flags : should be 0

I don't really get why it's needed. Isn't that redundant with the
interrupt parent and the interrupt number already defined by
interrupt-parent and interrupts in the top node?

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.ozlabs.org/pipermail/devicetree-discuss/attachments/20130716/bcca5d27/attachment.sig>