[PATCH 2/2] pwm: Add PWM polarity flag macros for DT

Stephen Warren swarren at wwwdotorg.org
Fri Jul 12 06:06:44 EST 2013


On 07/11/2013 01:32 PM, Thierry Reding wrote:
> On Thu, Jul 11, 2013 at 11:50:48AM -0600, Stephen Warren wrote:
>> On 07/11/2013 09:36 AM, Thierry Reding wrote:
>>> On Thu, Jul 11, 2013 at 04:37:48PM +0200, Laurent Pinchart
>>> wrote: [...]
>>>> diff --git 
>>>> a/Documentation/devicetree/bindings/pwm/atmel-tcb-pwm.txt 
>>>> b/Documentation/devicetree/bindings/pwm/atmel-tcb-pwm.txt
>>>> index de0eaed..be09be4 100644 --- 
>>>> a/Documentation/devicetree/bindings/pwm/atmel-tcb-pwm.txt
>>>> +++ b/Documentation/devicetree/bindings/pwm/atmel-tcb-pwm.txt
>>>> @@ -4,9 +4,9 @@ Required properties: - compatible: should be 
>>>> "atmel,tcb-pwm" - #pwm-cells: Should be 3.  The first cell 
>>>> specifies the per-chip index of the PWM to use, the second
>>>> cell is the period in nanoseconds and -  bit 0 in the third
>>>> cell is used to encode the polarity of PWM output. -  Set bit
>>>> 0 of the third cell in PWM specifier to 1 for inverse
>>>> polarity & -  set to 0 for normal polarity. +  the third cell
>>>> is used to encode the polarity of PWM output. Set the +
>>>> PWM_POLARITY_NORMAL flag for normal polarity or the
>>>> PWM_POLARITY_INVERSED +  flag for inverted polarity. PWM
>>>> flags are defined in <dt-bindings/pwm/pwm.h>. - tc-block: The
>>>> Timer Counter block to use as a PWM chip.
>>>> 
>>>> Example:
>>> 
>>> I'd prefer for the original text to stay in place and the
>>> reference to the dt-bindings/pwm/pwm.h file to go below that
>>> block.
>> 
>> I disagree here. The whole point of creating header files for
>> the constants in binding definitions was so that you wouldn't
>> have to duplicate all the values into the binding definitions.
>> Rather, you'd simply say "see <dt-bindings/xxx.h>".
> 
> But that's not something that this patch solves.

Well, if the comments I made on the patch re: that <linux/pwm.h>
should simply #include <dt-bindings/pwm/pwm.h> instead of duplicating
the constants, then yet this patch will solve that. There will be a
single place where the constants are defined.

> And it could be solved even in the absence of the header file
> defining the symbolic constants. If all the standard flags that
> dt-bindings/pwm/pwm.txt now specifies were to be listed in pwm.txt
> (they actually are) then referring to that document as the
> canonical source works equally well.

If that's all the happens, then there will still be duplication
between pwm.txt and <linux/pwm.h>.

> If we can take both of the above for granted, then sure, let's
> refer to the header from within the generic pwm.txt file and add a
> reference to that in bindings for drivers that use the standard
> flags.
> 
>>> Another issue might be that people without access to recent 
>>> versions of DTC won't be able to use the new #include feature,
>>> so keeping the documentation backwards compatible seems like a
>>> good idea.
>> 
>> The dtc source tree is duplicated into the kernel source tree, so
>> that isn't an issue for now.
>> 
>> Besides, the dtc version is an entirely unrelated issue to how
>> the documentation is written.
> 
> Well, not really. If the documentation specifies the binding in a
> way that the DTC can't handle that's still a problem. People will
> end up with a DTS that their DTC can't compile. I guess that can be
> resolved by adding a note to the upstream device tree repository
> about the minimum required version of DTC.

Yes, the separate repository would obviously require a version of dtc
that's able to compile the files there; i.e. a version equivalent to
what's already in the kernel tree (upstream 1.4.0 specifically).

Again, right now, all of the binding docs, the *.dts files, and the
dtc required to use them are part of the kernel; a single package, so
there's no scope for issues re: using dtc features that aren't
supported. If those components get separated later, obviously there
will be a requirement to install a specific version of dtc to use with
the separated *.dts and binding files.


More information about the devicetree-discuss mailing list