[PATCH v3 1/5] ARM: davinci: uart: move to devid based clk_get
Sekhar Nori
nsekhar at ti.com
Fri Jul 19 23:06:05 EST 2013
On Wednesday 19 June 2013 02:45 PM, Manjunathappa, Prakash wrote:
> For modules having single clock, clk_get should be done with dev_id.
> But current davinci implementation handles multiple instances
> of the UART devices with single platform_device_register. Hence clk_get
> is based on con_id rather than dev_id, this is not correct. Do
> platform_device_register for each instance and clk_get on dev_id.
>
> Signed-off-by: Manjunathappa, Prakash <prakash.pm at ti.com>
[...]
> diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c
> index f262581..57e6150 100644
> --- a/arch/arm/mach-davinci/serial.c
> +++ b/arch/arm/mach-davinci/serial.c
> @@ -76,7 +76,7 @@ int __init davinci_serial_setup_clk(unsigned instance, unsigned int *rate)
> char name[16];
> struct clk *clk;
> struct davinci_soc_info *soc_info = &davinci_soc_info;
> - struct device *dev = &soc_info->serial_dev->dev;
> + struct device *dev = &soc_info->serial_dev[instance].dev;
>
> sprintf(name, "uart%d", instance);
> clk = clk_get(dev, name);
Since the subject of your patch is to use avoid using the con_id for
clk_get() match, you should stop passing 'name' here. So instead do
clk = clk_get(dev, NULL);
I did this change locally (along with removal of now useless sprintf
call and name variable) and committed for inclusion in v3.12. Final
patch attached for reference.
Thanks,
Sekhar
---8<---
ARM: davinci: uart: move to devid based clk_get
For modules having single clock, clk_get should be done with dev_id.
But current davinci implementation handles multiple instances
of the UART devices with single platform_device_register. Hence clk_get
is based on con_id rather than dev_id, this is not correct. Do
platform_device_register for each instance and clk_get on dev_id.
Signed-off-by: Manjunathappa, Prakash <prakash.pm at ti.com>
[nsekhar at ti.com: actually stop using con_id in clk_get()]
Signed-off-by: Sekhar Nori <nsekhar at ti.com>
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index abbaf02..a3ffd52 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -395,9 +395,9 @@ static struct clk_lookup da830_clks[] = {
CLK(NULL, "tptc0", &tptc0_clk),
CLK(NULL, "tptc1", &tptc1_clk),
CLK("da830-mmc.0", NULL, &mmcsd_clk),
- CLK(NULL, "uart0", &uart0_clk),
- CLK(NULL, "uart1", &uart1_clk),
- CLK(NULL, "uart2", &uart2_clk),
+ CLK("serial8250.0", NULL, &uart0_clk),
+ CLK("serial8250.1", NULL, &uart1_clk),
+ CLK("serial8250.2", NULL, &uart2_clk),
CLK("spi_davinci.0", NULL, &spi0_clk),
CLK("spi_davinci.1", NULL, &spi1_clk),
CLK(NULL, "ecap0", &ecap0_clk),
@@ -1199,7 +1199,7 @@ static struct davinci_soc_info davinci_soc_info_da830 = {
.gpio_base = DA8XX_GPIO_BASE,
.gpio_num = 128,
.gpio_irq = IRQ_DA8XX_GPIO0,
- .serial_dev = &da8xx_serial_device,
+ .serial_dev = da8xx_serial_device,
.emac_pdata = &da8xx_emac_pdata,
};
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index a0d4f60..d4274ab 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -451,9 +451,9 @@ static struct clk_lookup da850_clks[] = {
CLK(NULL, "tpcc1", &tpcc1_clk),
CLK(NULL, "tptc2", &tptc2_clk),
CLK("pruss_uio", "pruss", &pruss_clk),
- CLK(NULL, "uart0", &uart0_clk),
- CLK(NULL, "uart1", &uart1_clk),
- CLK(NULL, "uart2", &uart2_clk),
+ CLK("serial8250.0", NULL, &uart0_clk),
+ CLK("serial8250.1", NULL, &uart1_clk),
+ CLK("serial8250.2", NULL, &uart2_clk),
CLK(NULL, "aintc", &aintc_clk),
CLK(NULL, "gpio", &gpio_clk),
CLK("i2c_davinci.2", NULL, &i2c1_clk),
@@ -1301,7 +1301,7 @@ static struct davinci_soc_info davinci_soc_info_da850 = {
.gpio_base = DA8XX_GPIO_BASE,
.gpio_num = 144,
.gpio_irq = IRQ_DA8XX_GPIO0,
- .serial_dev = &da8xx_serial_device,
+ .serial_dev = da8xx_serial_device,
.emac_pdata = &da8xx_emac_pdata,
.sram_dma = DA8XX_SHARED_RAM_BASE,
.sram_len = SZ_128K,
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 71a46a3..280f67d 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -68,7 +68,7 @@
void __iomem *da8xx_syscfg0_base;
void __iomem *da8xx_syscfg1_base;
-static struct plat_serial8250_port da8xx_serial_pdata[] = {
+static struct plat_serial8250_port da8xx_serial0_pdata[] = {
{
.mapbase = DA8XX_UART0_BASE,
.irq = IRQ_DA8XX_UARTINT0,
@@ -78,6 +78,11 @@ static struct plat_serial8250_port da8xx_serial_pdata[] = {
.regshift = 2,
},
{
+ .flags = 0,
+ }
+};
+static struct plat_serial8250_port da8xx_serial1_pdata[] = {
+ {
.mapbase = DA8XX_UART1_BASE,
.irq = IRQ_DA8XX_UARTINT1,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -86,6 +91,11 @@ static struct plat_serial8250_port da8xx_serial_pdata[] = {
.regshift = 2,
},
{
+ .flags = 0,
+ }
+};
+static struct plat_serial8250_port da8xx_serial2_pdata[] = {
+ {
.mapbase = DA8XX_UART2_BASE,
.irq = IRQ_DA8XX_UARTINT2,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -95,15 +105,33 @@ static struct plat_serial8250_port da8xx_serial_pdata[] = {
},
{
.flags = 0,
- },
+ }
};
-struct platform_device da8xx_serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = da8xx_serial_pdata,
+struct platform_device da8xx_serial_device[] = {
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = da8xx_serial0_pdata,
+ }
+ },
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM1,
+ .dev = {
+ .platform_data = da8xx_serial1_pdata,
+ }
},
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM2,
+ .dev = {
+ .platform_data = da8xx_serial2_pdata,
+ }
+ },
+ {
+ }
};
static s8 da8xx_queue_tc_mapping[][2] = {
diff --git a/arch/arm/mach-davinci/devices-tnetv107x.c b/arch/arm/mach-davinci/devices-tnetv107x.c
index 128cb9a..fc4a0fe 100644
--- a/arch/arm/mach-davinci/devices-tnetv107x.c
+++ b/arch/arm/mach-davinci/devices-tnetv107x.c
@@ -126,7 +126,7 @@ static struct platform_device edma_device = {
.dev.platform_data = tnetv107x_edma_info,
};
-static struct plat_serial8250_port serial_data[] = {
+static struct plat_serial8250_port serial0_platform_data[] = {
{
.mapbase = TNETV107X_UART0_BASE,
.irq = IRQ_TNETV107X_UART0,
@@ -137,6 +137,11 @@ static struct plat_serial8250_port serial_data[] = {
.regshift = 2,
},
{
+ .flags = 0,
+ }
+};
+static struct plat_serial8250_port serial1_platform_data[] = {
+ {
.mapbase = TNETV107X_UART1_BASE,
.irq = IRQ_TNETV107X_UART1,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -146,6 +151,11 @@ static struct plat_serial8250_port serial_data[] = {
.regshift = 2,
},
{
+ .flags = 0,
+ }
+};
+static struct plat_serial8250_port serial2_platform_data[] = {
+ {
.mapbase = TNETV107X_UART2_BASE,
.irq = IRQ_TNETV107X_UART2,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -156,13 +166,28 @@ static struct plat_serial8250_port serial_data[] = {
},
{
.flags = 0,
- },
+ }
};
-struct platform_device tnetv107x_serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev.platform_data = serial_data,
+
+struct platform_device tnetv107x_serial_device[] = {
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev.platform_data = serial0_platform_data,
+ },
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM1,
+ .dev.platform_data = serial1_platform_data,
+ },
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM2,
+ .dev.platform_data = serial2_platform_data,
+ },
+ {
+ }
};
static struct resource mmc0_resources[] = {
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 42ef53f..29fdbae 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -357,9 +357,9 @@ static struct clk_lookup dm355_clks[] = {
CLK(NULL, "clkout3", &clkout3_clk),
CLK(NULL, "arm", &arm_clk),
CLK(NULL, "mjcp", &mjcp_clk),
- CLK(NULL, "uart0", &uart0_clk),
- CLK(NULL, "uart1", &uart1_clk),
- CLK(NULL, "uart2", &uart2_clk),
+ CLK("serial8250.0", NULL, &uart0_clk),
+ CLK("serial8250.1", NULL, &uart1_clk),
+ CLK("serial8250.2", NULL, &uart2_clk),
CLK("i2c_davinci.1", NULL, &i2c_clk),
CLK("davinci-mcbsp.0", NULL, &asp0_clk),
CLK("davinci-mcbsp.1", NULL, &asp1_clk),
@@ -922,7 +922,7 @@ static struct davinci_timer_info dm355_timer_info = {
.clocksource_id = T0_TOP,
};
-static struct plat_serial8250_port dm355_serial_platform_data[] = {
+static struct plat_serial8250_port dm355_serial0_platform_data[] = {
{
.mapbase = DAVINCI_UART0_BASE,
.irq = IRQ_UARTINT0,
@@ -932,6 +932,11 @@ static struct plat_serial8250_port dm355_serial_platform_data[] = {
.regshift = 2,
},
{
+ .flags = 0,
+ }
+};
+static struct plat_serial8250_port dm355_serial1_platform_data[] = {
+ {
.mapbase = DAVINCI_UART1_BASE,
.irq = IRQ_UARTINT1,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -940,6 +945,11 @@ static struct plat_serial8250_port dm355_serial_platform_data[] = {
.regshift = 2,
},
{
+ .flags = 0,
+ }
+};
+static struct plat_serial8250_port dm355_serial2_platform_data[] = {
+ {
.mapbase = DM355_UART2_BASE,
.irq = IRQ_DM355_UARTINT2,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -948,16 +958,34 @@ static struct plat_serial8250_port dm355_serial_platform_data[] = {
.regshift = 2,
},
{
- .flags = 0
- },
+ .flags = 0,
+ }
};
-static struct platform_device dm355_serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = dm355_serial_platform_data,
+static struct platform_device dm355_serial_device[] = {
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = dm355_serial0_platform_data,
+ }
+ },
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM1,
+ .dev = {
+ .platform_data = dm355_serial1_platform_data,
+ }
},
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM2,
+ .dev = {
+ .platform_data = dm355_serial2_platform_data,
+ }
+ },
+ {
+ }
};
static struct davinci_soc_info davinci_soc_info_dm355 = {
@@ -981,7 +1009,7 @@ static struct davinci_soc_info davinci_soc_info_dm355 = {
.gpio_base = DAVINCI_GPIO_BASE,
.gpio_num = 104,
.gpio_irq = IRQ_DM355_GPIOBNK0,
- .serial_dev = &dm355_serial_device,
+ .serial_dev = dm355_serial_device,
.sram_dma = 0x00010000,
.sram_len = SZ_32K,
};
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index fa7af5e..b601189 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -455,8 +455,8 @@ static struct clk_lookup dm365_clks[] = {
CLK("vpss", "master", &vpss_master_clk),
CLK("vpss", "slave", &vpss_slave_clk),
CLK(NULL, "arm", &arm_clk),
- CLK(NULL, "uart0", &uart0_clk),
- CLK(NULL, "uart1", &uart1_clk),
+ CLK("serial8250.0", NULL, &uart0_clk),
+ CLK("serial8250.1", NULL, &uart1_clk),
CLK("i2c_davinci.1", NULL, &i2c_clk),
CLK("da830-mmc.0", NULL, &mmcsd0_clk),
CLK("da830-mmc.1", NULL, &mmcsd1_clk),
@@ -1041,7 +1041,7 @@ static struct davinci_timer_info dm365_timer_info = {
#define DM365_UART1_BASE (IO_PHYS + 0x106000)
-static struct plat_serial8250_port dm365_serial_platform_data[] = {
+static struct plat_serial8250_port dm365_serial0_platform_data[] = {
{
.mapbase = DAVINCI_UART0_BASE,
.irq = IRQ_UARTINT0,
@@ -1051,6 +1051,11 @@ static struct plat_serial8250_port dm365_serial_platform_data[] = {
.regshift = 2,
},
{
+ .flags = 0,
+ }
+};
+static struct plat_serial8250_port dm365_serial1_platform_data[] = {
+ {
.mapbase = DM365_UART1_BASE,
.irq = IRQ_UARTINT1,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -1059,16 +1064,27 @@ static struct plat_serial8250_port dm365_serial_platform_data[] = {
.regshift = 2,
},
{
- .flags = 0
- },
+ .flags = 0,
+ }
};
-static struct platform_device dm365_serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = dm365_serial_platform_data,
+static struct platform_device dm365_serial_device[] = {
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = dm365_serial0_platform_data,
+ }
+ },
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM1,
+ .dev = {
+ .platform_data = dm365_serial1_platform_data,
+ }
},
+ {
+ }
};
static struct davinci_soc_info davinci_soc_info_dm365 = {
@@ -1093,7 +1109,7 @@ static struct davinci_soc_info davinci_soc_info_dm365 = {
.gpio_num = 104,
.gpio_irq = IRQ_DM365_GPIO0,
.gpio_unbanked = 8, /* really 16 ... skip muxed GPIOs */
- .serial_dev = &dm365_serial_device,
+ .serial_dev = dm365_serial_device,
.emac_pdata = &dm365_emac_pdata,
.sram_dma = 0x00010000,
.sram_len = SZ_32K,
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index a49d182..490eb8c 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -303,9 +303,9 @@ static struct clk_lookup dm644x_clks[] = {
CLK("vpss", "master", &vpss_master_clk),
CLK("vpss", "slave", &vpss_slave_clk),
CLK(NULL, "arm", &arm_clk),
- CLK(NULL, "uart0", &uart0_clk),
- CLK(NULL, "uart1", &uart1_clk),
- CLK(NULL, "uart2", &uart2_clk),
+ CLK("serial8250.0", NULL, &uart0_clk),
+ CLK("serial8250.1", NULL, &uart1_clk),
+ CLK("serial8250.2", NULL, &uart2_clk),
CLK("davinci_emac.1", NULL, &emac_clk),
CLK("i2c_davinci.1", NULL, &i2c_clk),
CLK("palm_bk3710", NULL, &ide_clk),
@@ -813,7 +813,7 @@ static struct davinci_timer_info dm644x_timer_info = {
.clocksource_id = T0_TOP,
};
-static struct plat_serial8250_port dm644x_serial_platform_data[] = {
+static struct plat_serial8250_port dm644x_serial0_platform_data[] = {
{
.mapbase = DAVINCI_UART0_BASE,
.irq = IRQ_UARTINT0,
@@ -823,6 +823,11 @@ static struct plat_serial8250_port dm644x_serial_platform_data[] = {
.regshift = 2,
},
{
+ .flags = 0,
+ }
+};
+static struct plat_serial8250_port dm644x_serial1_platform_data[] = {
+ {
.mapbase = DAVINCI_UART1_BASE,
.irq = IRQ_UARTINT1,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -831,6 +836,11 @@ static struct plat_serial8250_port dm644x_serial_platform_data[] = {
.regshift = 2,
},
{
+ .flags = 0,
+ }
+};
+static struct plat_serial8250_port dm644x_serial2_platform_data[] = {
+ {
.mapbase = DAVINCI_UART2_BASE,
.irq = IRQ_UARTINT2,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -839,16 +849,34 @@ static struct plat_serial8250_port dm644x_serial_platform_data[] = {
.regshift = 2,
},
{
- .flags = 0
- },
+ .flags = 0,
+ }
};
-static struct platform_device dm644x_serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = dm644x_serial_platform_data,
+static struct platform_device dm644x_serial_device[] = {
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = dm644x_serial0_platform_data,
+ }
},
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM1,
+ .dev = {
+ .platform_data = dm644x_serial1_platform_data,
+ }
+ },
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM2,
+ .dev = {
+ .platform_data = dm644x_serial2_platform_data,
+ }
+ },
+ {
+ }
};
static struct davinci_soc_info davinci_soc_info_dm644x = {
@@ -872,7 +900,7 @@ static struct davinci_soc_info davinci_soc_info_dm644x = {
.gpio_base = DAVINCI_GPIO_BASE,
.gpio_num = 71,
.gpio_irq = IRQ_GPIOBNK0,
- .serial_dev = &dm644x_serial_device,
+ .serial_dev = dm644x_serial_device,
.emac_pdata = &dm644x_emac_pdata,
.sram_dma = 0x00008000,
.sram_len = SZ_16K,
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index d1259e8..23609b1 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -342,9 +342,9 @@ static struct clk_lookup dm646x_clks[] = {
CLK(NULL, "edma_tc1", &edma_tc1_clk),
CLK(NULL, "edma_tc2", &edma_tc2_clk),
CLK(NULL, "edma_tc3", &edma_tc3_clk),
- CLK(NULL, "uart0", &uart0_clk),
- CLK(NULL, "uart1", &uart1_clk),
- CLK(NULL, "uart2", &uart2_clk),
+ CLK("serial8250.0", NULL, &uart0_clk),
+ CLK("serial8250.1", NULL, &uart1_clk),
+ CLK("serial8250.2", NULL, &uart2_clk),
CLK("i2c_davinci.1", NULL, &i2c_clk),
CLK(NULL, "gpio", &gpio_clk),
CLK("davinci-mcasp.0", NULL, &mcasp0_clk),
@@ -790,7 +790,7 @@ static struct davinci_timer_info dm646x_timer_info = {
.clocksource_id = T0_TOP,
};
-static struct plat_serial8250_port dm646x_serial_platform_data[] = {
+static struct plat_serial8250_port dm646x_serial0_platform_data[] = {
{
.mapbase = DAVINCI_UART0_BASE,
.irq = IRQ_UARTINT0,
@@ -800,6 +800,11 @@ static struct plat_serial8250_port dm646x_serial_platform_data[] = {
.regshift = 2,
},
{
+ .flags = 0,
+ }
+};
+static struct plat_serial8250_port dm646x_serial1_platform_data[] = {
+ {
.mapbase = DAVINCI_UART1_BASE,
.irq = IRQ_UARTINT1,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -808,6 +813,11 @@ static struct plat_serial8250_port dm646x_serial_platform_data[] = {
.regshift = 2,
},
{
+ .flags = 0,
+ }
+};
+static struct plat_serial8250_port dm646x_serial2_platform_data[] = {
+ {
.mapbase = DAVINCI_UART2_BASE,
.irq = IRQ_DM646X_UARTINT2,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -816,16 +826,34 @@ static struct plat_serial8250_port dm646x_serial_platform_data[] = {
.regshift = 2,
},
{
- .flags = 0
- },
+ .flags = 0,
+ }
};
-static struct platform_device dm646x_serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = dm646x_serial_platform_data,
+static struct platform_device dm646x_serial_device[] = {
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = dm646x_serial0_platform_data,
+ }
+ },
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM1,
+ .dev = {
+ .platform_data = dm646x_serial1_platform_data,
+ }
},
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM2,
+ .dev = {
+ .platform_data = dm646x_serial2_platform_data,
+ }
+ },
+ {
+ }
};
static struct davinci_soc_info davinci_soc_info_dm646x = {
@@ -849,7 +877,7 @@ static struct davinci_soc_info davinci_soc_info_dm646x = {
.gpio_base = DAVINCI_GPIO_BASE,
.gpio_num = 43, /* Only 33 usable */
.gpio_irq = IRQ_DM646X_GPIOBNK0,
- .serial_dev = &dm646x_serial_device,
+ .serial_dev = dm646x_serial_device,
.emac_pdata = &dm646x_emac_pdata,
.sram_dma = 0x10010000,
.sram_len = SZ_32K,
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 7b41a5e..aae5307 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -111,7 +111,7 @@ void da8xx_restart(enum reboot_mode mode, const char *cmd);
void da8xx_rproc_reserve_cma(void);
int da8xx_register_rproc(void);
-extern struct platform_device da8xx_serial_device;
+extern struct platform_device da8xx_serial_device[];
extern struct emac_platform_data da8xx_emac_pdata;
extern struct da8xx_lcdc_platform_data sharp_lcd035q3dg01_pdata;
extern struct da8xx_lcdc_platform_data sharp_lk043t1dg01_pdata;
diff --git a/arch/arm/mach-davinci/include/mach/tnetv107x.h b/arch/arm/mach-davinci/include/mach/tnetv107x.h
index 16314c6..beb7c0e 100644
--- a/arch/arm/mach-davinci/include/mach/tnetv107x.h
+++ b/arch/arm/mach-davinci/include/mach/tnetv107x.h
@@ -50,7 +50,7 @@ struct tnetv107x_device_info {
};
extern struct platform_device tnetv107x_wdt_device;
-extern struct platform_device tnetv107x_serial_device;
+extern struct platform_device tnetv107x_serial_device[];
extern void tnetv107x_init(void);
extern void tnetv107x_devices_init(struct tnetv107x_device_info *);
diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c
index f262581..2bc74c2 100644
--- a/arch/arm/mach-davinci/serial.c
+++ b/arch/arm/mach-davinci/serial.c
@@ -73,13 +73,11 @@ static void __init davinci_serial_reset(struct plat_serial8250_port *p)
/* Enable UART clock and obtain its rate */
int __init davinci_serial_setup_clk(unsigned instance, unsigned int *rate)
{
- char name[16];
struct clk *clk;
struct davinci_soc_info *soc_info = &davinci_soc_info;
- struct device *dev = &soc_info->serial_dev->dev;
+ struct device *dev = &soc_info->serial_dev[instance].dev;
- sprintf(name, "uart%d", instance);
- clk = clk_get(dev, name);
+ clk = clk_get(dev, NULL);
if (IS_ERR(clk)) {
pr_err("%s:%d: failed to get UART%d clock\n",
__func__, __LINE__, instance);
@@ -96,19 +94,25 @@ int __init davinci_serial_setup_clk(unsigned instance, unsigned int *rate)
int __init davinci_serial_init(struct davinci_uart_config *info)
{
- int i, ret;
+ int i, ret = 0;
struct davinci_soc_info *soc_info = &davinci_soc_info;
- struct device *dev = &soc_info->serial_dev->dev;
- struct plat_serial8250_port *p = dev->platform_data;
+ struct device *dev;
+ struct plat_serial8250_port *p;
/*
* Make sure the serial ports are muxed on at this point.
* You have to mux them off in device drivers later on if not needed.
*/
- for (i = 0; p->flags; i++, p++) {
+ for (i = 0; soc_info->serial_dev[i].dev.platform_data != NULL; i++) {
+ dev = &soc_info->serial_dev[i].dev;
+ p = dev->platform_data;
if (!(info->enabled_uarts & (1 << i)))
continue;
+ ret = platform_device_register(&soc_info->serial_dev[i]);
+ if (ret)
+ continue;
+
ret = davinci_serial_setup_clk(i, &p->uartclk);
if (ret)
continue;
@@ -125,6 +129,5 @@ int __init davinci_serial_init(struct davinci_uart_config *info)
if (p->membase && p->type != PORT_AR7)
davinci_serial_reset(p);
}
-
- return platform_device_register(soc_info->serial_dev);
+ return ret;
}
diff --git a/arch/arm/mach-davinci/tnetv107x.c b/arch/arm/mach-davinci/tnetv107x.c
index 4545667..f4d7fbb 100644
--- a/arch/arm/mach-davinci/tnetv107x.c
+++ b/arch/arm/mach-davinci/tnetv107x.c
@@ -264,7 +264,7 @@ static struct clk_lookup clks[] = {
CLK(NULL, "clk_chipcfg", &clk_chipcfg),
CLK("tnetv107x-ts.0", NULL, &clk_tsc),
CLK(NULL, "clk_rom", &clk_rom),
- CLK(NULL, "uart2", &clk_uart2),
+ CLK("serial8250.2", NULL, &clk_uart2),
CLK(NULL, "clk_pktsec", &clk_pktsec),
CLK("tnetv107x-rng.0", NULL, &clk_rng),
CLK("tnetv107x-pka.0", NULL, &clk_pka),
@@ -274,8 +274,8 @@ static struct clk_lookup clks[] = {
CLK(NULL, "clk_gpio", &clk_gpio),
CLK(NULL, "clk_mdio", &clk_mdio),
CLK("dm6441-mmc.0", NULL, &clk_sdio0),
- CLK(NULL, "uart0", &clk_uart0),
- CLK(NULL, "uart1", &clk_uart1),
+ CLK("serial8250.0", NULL, &clk_uart0),
+ CLK("serial8250.1", NULL, &clk_uart1),
CLK(NULL, "timer0", &clk_timer0),
CLK(NULL, "timer1", &clk_timer1),
CLK("tnetv107x_wdt.0", NULL, &clk_wdt_arm),
@@ -757,7 +757,7 @@ static struct davinci_soc_info tnetv107x_soc_info = {
.gpio_type = GPIO_TYPE_TNETV107X,
.gpio_num = TNETV107X_N_GPIO,
.timer_info = &timer_info,
- .serial_dev = &tnetv107x_serial_device,
+ .serial_dev = tnetv107x_serial_device,
};
void __init tnetv107x_init(void)
More information about the devicetree-discuss
mailing list