[PATCH v3 07/13] ARM: dts: Add AK8975 device node for Exynos4412 TRATS2 board
Sylwester Nawrocki
s.nawrocki at samsung.com
Mon Jul 8 22:52:51 EST 2013
Hi Tomasz,
On 07/06/2013 01:18 AM, Tomasz Figa wrote:
> On Monday 01 of July 2013 17:22:29 Sylwester Nawrocki wrote:
>> From: Jacek Anaszewski <j.anaszewski at samsung.com>
>>
>> This patch adds AK8975 magnetometer node and corresponding
>> i2c-gpio bus node for TRATS2 board.
>>
>> Signed-off-by: Jacek Anaszewski <j.anaszewski at samsung.com>
>> Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
>> Signed-off-by: Sylwester Nawrocki <s.nawrocki at samsung.com>
>> ---
>> arch/arm/boot/dts/exynos4412-trats2.dts | 19 +++++++++++++++++++
>> 1 file changed, 19 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts
>> b/arch/arm/boot/dts/exynos4412-trats2.dts index 056b835..b9de3b5 100644
>> --- a/arch/arm/boot/dts/exynos4412-trats2.dts
>> +++ b/arch/arm/boot/dts/exynos4412-trats2.dts
>> @@ -19,6 +19,10 @@
>> model = "Samsung Trats 2 based on Exynos4412";
>> compatible = "samsung,trats2", "samsung,exynos4412";
>>
>> + aliases {
>> + i2c8 = &i2c_ak8975;
>> + };
>> +
>> memory {
>> reg = <0x40000000 0x40000000>;
>> };
>> @@ -453,4 +457,19 @@
>> serial at 13830000 {
>> status = "okay";
>> };
>> +
>> + i2c_ak8975: i2c-gpio at 0 {
>
> I think this @0 is slightly incorrect here, as it seems like there is no
> reg property present inside the node and so the device isn't located at
> any address.
>
> For logical indices like in this case I would rather use i2c-gpio-0
> instead.
Indeed, using "-<N>" postfix sounds like a better alternative. I'll change
it and repost the series after 3.11-rc1 is released.
>> + compatible = "i2c-gpio";
>> + gpios = <&gpy2 4 0>, <&gpy2 5 0>;
>> + i2c-gpio,delay-us = <2>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "okay";
>> +
>> + ak8975 at 0c {
>> + compatible = "asahi-kasei,ak8975";
>> + reg = <0x0c>;
>> + gpios = <&gpj0 7 0>;
>> + };
>> + };
>> };
>
> Otherwise looks good.
>
> Reviewed-by: Tomasz Figa <t.figa at samsung.com>
--
Thanks,
Sylwester
More information about the devicetree-discuss
mailing list